[Q]Guides For Installing Roms? - Sprint Samsung Galaxy S III

Coming from an EVO 4G I thought I had a pretty good grip on installing roms. A week after getting and rooting my S3 I'm still gun shy. I want to install Jelly Bomb but I keep seeing posts about flash counters and dirty flash. I've never heard this mentioned before. Are these Samsung exclusive terms? I wanted to go easy and find a Rom as close to Stock as possible with the ability to remove apps to get my feet wet but haven't found one. This phone seems easier to brick than the EVO. Am I right? Also, I see things referencing Touchwiz and fishing it. Very confused. Samsung's version of Sense I guess?

ruckstande said:
Coming from an EVO 4G I thought I had a pretty good grip on installing roms. A week after getting and rooting my S3 I'm still gun shy. I want to install Jelly Bomb but I keep seeing posts about flash counters and dirty flash. I've never heard this mentioned before. Are these Samsung exclusive terms? I wanted to go easy and find a Rom as close to Stock as possible with the ability to remove apps to get my feet wet but haven't found one. This phone seems easier to brick than the EVO. Am I right? Also, I see things referencing Touchwiz and fishing it. Very confused. Samsung's version of Sense I guess?
Click to expand...
Click to collapse
Flash counters can be reset pretty easy these days. all roms labeled as having TW or touchwiz are pretty much stock with things like battery saving mods or battery hogging apps removed that are usually not needed"debloated".
this post sent from my Jellybombed GalaxySIII

joeyhdownsouth said:
Flash counters can be reset pretty easy these days. all roms labeled as having TW or touchwiz are pretty much stock with things like battery saving mods or battery hogging apps removed that are usually not needed"debloated".
this post sent from my Jellybombed GalaxySIII
Click to expand...
Click to collapse
Thanks. I see you are on Jelly Bomb right now. What's your overall opinion of it? Any problems? Anything I should know not mentioned in the Dev's post?

ruckstande said:
Thanks. I see you are on Jelly Bomb right now. What's your overall opinion of it? Any problems? Anything I should know not mentioned in the Dev's post?
Click to expand...
Click to collapse
Here's what you do...former evo'er here as well...
Grab the one click Odin LJ7 that you will find in sg3/android dev. Titled (root)odin one clicks by billard. Read the post so you understand how to use it. Save it to your CPU. That will save you if you ever brick your shiny new phone.
Go on you tube and search qbking77....you'll find every video you want regarding rooting and installing cmw
After that its the exact same way to flash ROMs as your evo. I promise.
Good luck

jwitt418 said:
Here's what you do...former evo'er here as well...
Grab the one click Odin LJ7 that you will find in sg3/android dev. Titled (root)odin one clicks by billard. Read the post so you understand how to use it. Save it to your CPU. That will save you if you ever brick your shiny new phone.
Go on you tube and search qbking77....you'll find every video you want regarding rooting and installing cmw
After that its the exact same way to flash ROMs as your evo. I promise.
Good luck
Click to expand...
Click to collapse
So I should be flashing through Odin the same way I rooted? I, did root btw using qbking77 very easy video guide. Took me all of ten minutes to root.

ruckstande said:
Thanks. I see you are on Jelly Bomb right now. What's your overall opinion of it? Any problems? Anything I should know not mentioned in the Dev's post?
Click to expand...
Click to collapse
I luv this rom, super themed though, not everyone likes all the blue. For me everything works. Just the statusbar after a reboot, you have to pull down notification bar once to get it to show up. Other than that no problems, kernal in 10.2 allows overclocking also.
this post sent from my Jellybombed GalaxySIII

Your fine then...just install cmw and your good to go.
The galaxy 3 is different than the evo in the sense that its very easy to root and unroot using Odin. The evo is a pain to unroot.
Make sure your grab that one click Odin and save tho because it will bail you out of trouble if something gets screwed up. You could run that and it will return you to stock or stock rooted (your choice depending on what file you download).
Anyways. Install cmw. Download ROM to your SD or internal SD. Hold volume up, home, power to cmw. Wipe/factory reset x3, wipe cache, advanced/wipe dalvik, install ROM, reboot
By the way. If you want what you posted in op keep stock but rooted. If you want a better kernel flash team sonics or jelly bomb with kt747....but if I were you I'd go SlimBean...enjoy

One other thing. What's this business about downloading a modem?

The roms are not modem dependant. And chances are if you're on stock you already have the latest modem. If you want to confirm go in the about section of settings and look at your baseband. should end in LJ7. Like I said though its not really important

If the modem isn't that important, why can't I connect to Sprint's network at all? I was working on installing the Goodness ROM which said I had to install a particular modem. I downloaded all files to the computer as suggested, transferred them to the phone then used TWRP as my backup and installed the ROM and the modem as stated. When I went to reboot it told me that there was no ROM installed. So I went back to my recovery installed it and now I can not connect to the network at all. Can someone please help? I need my phone as I am a Paramedic and I talk to the hospitals with it when I am bringing them a pt.

PolynesianMedic said:
If the modem isn't that important, why can't I connect to Sprint's network at all? I was working on installing the Goodness ROM which said I had to install a particular modem. I downloaded all files to the computer as suggested, transferred them to the phone then used TWRP as my backup and installed the ROM and the modem as stated. When I went to reboot it told me that there was no ROM installed. So I went back to my recovery installed it and now I can not connect to the network at all. Can someone please help? I need my phone as I am a Paramedic and I talk to the hospitals with it when I am bringing them a pt.
Click to expand...
Click to collapse
Not trying to sound harsh here but if that's the case just stay stock rooted. You need the phone brother...peoples lives are depending on it...lol
On a lighter side, I do t have experience with that ROM. But sounds like a bad flash. Wipe/factory reset...cache....dalvik...and I even format the internal SD...haven't had any problems

Open the dialer and hit ##72786# Should set ya straight

Oh well that didn't work. I watched the QBKing77 video and followed those instructions. Install took way less than I expected. Maybe two minutes? I pressed reboot and it rebooted back into recovery. That didn't go so well.

Related

[Q] wipe data/factory reset ? Complete Noob Here.

I have looked around and am still not sure which way would be best to un-root my Evo 4g. Can I just use ( wipe data/factory reset ) then update my contacts thru asurion ? and reload the apps i want from the market ? right now i am in ClockworkMod Recovery v3.0.05 ( it was originally rooted with unrevoked ) not unrevoked forever. I thought i would like to try the latest official build for a while. ( not looking forward to the sprint bloatware ) or would the easiest thing be to try and update to the latest ClockworkMod or some other build. Thanks for any info you might have.
Best way to unroot is to grab the unrevoked s-on tool. Flash that and run a ruu or grab a stock non rooted rom.
Sent from my PC36100 using xda premium
so i guess wipe data is really no good ?
Can I just use ( wipe data/factory reset ) then update my contacts thru asurion ?
Click to expand...
Click to collapse
Not really sure what you are asking here. A factory reset will NOT unroot you, it will just reset whatever rom you are on. And updating contacts through Asurion? Asurion is your insurance provider, they have nothing to do with contacts....
I thought i would like to try the latest official build for a while.
Click to expand...
Click to collapse
You don't have to unroot to do this, just flash a rooted stock rom. This way you stay rooted. If you unroot, and then update to the latest stock rom, it will be VERY difficult to re-root.
or would the easiest thing be to try and update to the latest ClockworkMod or some other build.
Click to expand...
Click to collapse
I think you need to read a LOT more about rooting before you proceed to do any more, you don't really seem to know what's going on. ClockworkMod is your recovery, which has nothing to do with your rom. Updating Clockwork will not update your rom, or unroot you.
LOL I guess you are right. A LOT more reading in my future.. Thanks though.
I guess I will go ahead with the idea to update to the newest rom. I thought because ClockworkMod gave me the option to " wipe data/factory reset. " it would set it to factory default, which I thought might be un-rooted.
Side note: Asurion also syncs my phone contacts. I had to use it once when my phone was lost. to update / sync the new phone. It worked very well. Google sync stopped working long ago. I get an error message every time.
But thanks again. that post was very helpful to point me in the right direction. and make me feel a little foolish LOL BE WELL
DGXYZ said:
Google sync stopped working long ago. I get an error message every time.
Click to expand...
Click to collapse
did you try setting up a new gmail account? or maybe jsut delete it on your phone and re-set it up.
not yet. but i will soon. ill let you know how it goes. I've read that it works for some and not for others. haven't found a lot of info directly from Google though. it seems they don't acknowledge the issue. but I am sure i'm not the only one experiencing the error message.
If you really like the new sprint os but hate the bloatware, why not use a rooted sprint rom that one of the devs has made, kind of exactly what sprint/htc gives you but minus the bloat!
Thanks I will. i'm very new to this, how do i go about getting the correct one ? as you can see from above. I have Alot more reading to do.
just did a search on the rom you are running. How do you like that one.
The Rom I am running is great! Just can't post the link to it in this forum due to forum rules. But the Rom I am running is similar to a stock rom, just not a stock rom of an evo 4g. It's ics os which stands for (ice cream sandwich) the new HTC os. Its the stock upgrade for most of their new phones such as the Samsung Galaxy SII. Evo 4g was left out, but due to the devs on this site and others the evo 4g will be just fine!
Edit: Well there is alot of reading and research involved. But for me the best kind of research is trial and error. I read up on certain roms that interest me that have key perks. Such as ICS (newer roms), or wimax enabled (4g enabled and typically on the older roms). Then I read up on peoples response to the roms, what issues they have had, how they have fixed them, how the developer has fixed them. And then after that I'll flash the roms and see how they run. Usually a day or two of use can tell you if you like it or not. Its like a car test drive!
That's Great. I will look around a little more. and get a new rom, I'll probably try the one you mentioned, ( found the link ) Hey, I really appreciate the info, I just need the time to screw around a little more. LOL. Be Well. I'll let ya know how it goes. It is pretty interesting.
Yes on the site you are currently on, there should be a few helpful tips on how to flash the roms and kernels properly. Good luck, also a bunch of great tips on the CM7 Wiki

[Q] EL29 and Updating

I'm currently running GB El29 and am looking to update. I've done a lot of reading around the forum, the wiki, and a few other websites, and I'd just like a little bit of clarification. I figure I'd ask now, before doing anything, as opposed to asking later, after something's gone wrong.
Looking at the Wiki, I was considering updating to Calkulin's E4GT 2 v1.6, or unrooting and then waiting for the Official ICS update (it was rerolled today, apparently.) Or, to Blazer, but I'm not sure if going to the ICS version or GB version is best.
My question - The process to update - Nandroid, Flash Format All, Flash Rom, Success? I've noticed a lot of installs say to "Wipe All", and I assume that's what Flashing Format All does, correct? I just don't want to mess up - I had no problems rooting, following that guide I mentioned, and I've done a lot of reading...I just want to confirm before doing anything. I mean, I know, wipe delvic and clear cache, but Format All does that, correct?
I rooted my phone using "How to Root Galaxy S2 Epic 4G Touch! [NEW][SPH-D710]" rom Epic4gtouchroot.com. I'd post a link, but I've fewer than 10 posts. All I've done, outside of root, is install the Beats sound files. That's really it.
Any help at all would be greatly appreciated.
Read this 10 times over then you should be fine.
http://forum.xda-developers.com/showthread.php?t=1525495
If you are interested in certin roms read threw the rom post to see if people have already answerd the questions you seek. Some devs request you flash different ways so read the OP in the post of the roms you are considering
UnOfficial
Read this once, stay with gingerbread, try Calks E4GT V. 3.0 YOU won't regret it.
Pp.
Delivered to you via Mayan technology .
PanchoPlanet said:
Read this once, stay with gingerbread, try Calks E4GT V. 3.0 YOU won't regret it.
Pp.
Delivered to you via Mayan technology .
Click to expand...
Click to collapse
Yeah, that's what I was thinking of going with. I've read over his topic several times, and even though I'm really not a fan of the transparent notification tray, most of the included mods sound really, really useful. Thanks for the heads up.
And thank you too, jugaloo. I actually have that page bookmarked on my phone lol. I've already made several nandroid backups - I plan on making a titanium backup in a moment. My only concern now is th process from going from El29 GB to E4GT 3. Rereading that thread several times has me wondering - I download the ROM, place it on the SD, boot into recovery, clear delvic and cache, run Format all, then install the ROM, correct? I already have a nandroid backup, so in case anything here goes wrong, I can just flash the backup back on, correct?
IceCatraz said:
Yeah, that's what I was thinking of going with. I've read over his topic several times, and even though I'm really not a fan of the transparent notification tray, most of the included mods sound really, really useful. Thanks for the heads up.
And thank you too, jugaloo. I actually have that page bookmarked on my phone lol. I've already made several nandroid backups - I plan on making a titanium backup in a moment. My only concern now is th process from going from El29 GB to E4GT 3. Rereading that thread several times has me wondering - I download the ROM, place it on the SD, boot into recovery, clear delvic and cache, run Format all, then install the ROM, correct? I already have a nandroid backup, so in case anything here goes wrong, I can just flash the backup back on, correct?
Click to expand...
Click to collapse
I just run the format x2 script made by ruj in the blu kuban thread. Then i follow the devs op to install. From what i see you have your feet planted and ur about to make that plunge. Id take the next step and try the flash. Id go with a different rom the the fe22 is out of date and calk has moved on. Try blu kubans rom its super stable and ita built from source. I myself like gb better.
UnOfficial
juggalo1300 said:
I just run the format x2 script made by ruj in the blu kuban thread. Then i follow the devs op to install. From what i see you have your feet planted and ur about to make that plunge. Id take the next step and try the flash. Id go with a different rom the the fe22 is out of date and calk has moved on. Try blu kubans rom its super stable and ita built from source. I myself like gb better.
UnOfficial
Click to expand...
Click to collapse
I was thinking that - Calk's topic was updated in May, while blukuban was updated in February. I mean, I can always try both, right? I'd like to go with Calk's first, then try blukuban, only because BK is heavily themed. But either way, thanks!
Edit
I didn't realize the blukuban thread had updates outside of the OP. It was very recently updated. I might check that one out first.
Yes the blu kuban ics is always up todate and he is there for the people. If you want ics builds that are more stockish id aokp they have theming going on but is nice and stable. Read all of the op and there sites for correct install. Cm9 alpha 6 is also really good. Blazers rom is also really good. Those are all stockish built from source. For gb roms id go with either calks 3.0 or UnOfifcials ics gb rom. For me gb gives me most bang for battery and bandwith. Those last two roms are highly recomended. Calks is super fast stock with options for themes. Unofficial gb ics is themed lightly and is very good for battery and the animations are nice
UnOfficial
Alright, awesome. Waiting for my battery to finish charging (my phone reset while performing a titanium backup, and the battery life dropped from 44 to 9, so I'm getting it back up to at least 50.)
So just to recap
-
To Install
Boot to recovery
Make a NAND Backup
Wipe Phone (Format All/wipe delvic/wipe cache)
Install ROM
Right? That's what Blukuban's install requires, and Calk's doesn't have any special instructions, outside of " a wipe is recommended BEFORE flashing if coming from another ROM", which is what the Format All is for, correct?
You've been insanely helpful. Thank you so much! I'm also looking into UnOfficial (it's not on the Wiki, so I didn't really know about it until you mentioned it.
IceCatraz said:
Alright, awesome. Waiting for my battery to finish charging (my phone reset while performing a titanium backup, and the battery life dropped from 44 to 9, so I'm getting it back up to at least 50.)
So just to recap
-
To Install
Boot to recovery
Make a NAND Backup
Wipe Phone (Format All/wipe delvic/wipe cache)
Install ROM
Right? That's what Blukuban's install requires, and Calk's doesn't have any special instructions, outside of " a wipe is recommended BEFORE flashing if coming from another ROM", which is what the Format All is for, correct?
You've been insanely helpful. Thank you so much! I'm also looking into UnOfficial (it's not on the Wiki, so I didn't really know about it until you mentioned it.)
Click to expand...
Click to collapse
Charge the bartery more. Use a wipe script dont touch the fomat that is built into the cwm while flashing a ics rom. If you use the wipe x2 script found here
http://forum.xda-developers.com/showthread.php?p=25448865
U should be good. It wipes everythings even both of the caches twice. If you already have a newer nandroid id just go with that instead of making a new one everytime you flash. If possible download the roms to pc check the md5 check sums make sure they match. If they match transfer to the phone. When downloading to the phone it has a higher chance of a bad download. I try and flash at 75% battery incase of error and you have to restore a previous nandroid. If you want read this post about the eMMc bug. Most roms are safe now but some are not current.
http://forum.xda-developers.com/showthread.php?t=1644364
Not trying to scare you with that last link you should know about it before hand so you know the dangers of flashing a non safe ics roms. If you have any more queations shoot. But i think your good to go
UnOfficial
One more thing. Qbking27 has install video guides for 90% of the roms in the threads of the rom. Id watch those before installing that rom you want. Some times they are buried in the op. You can use them as a step by step as you install. Best if luck to you and i want a report once you get your new custom rom on your phone.
UnOfficial
You got it!
I'm doing a GB build - from what I've come across, GB just gets better battery life, and I just feel more comfortable using it. At least, until the official ICS rolls out from Samsung. If that one is well received, and it's worth it, I'll unroot/wipe fresh and try it out.
That being said though, I'll use x2 then. Will it matter if I do both, just for good, measure? (Both x2 and FormatAll)
And yes, I'll be downloading to PC first, then transferring. I feel more comfortable doing it that way. I'll be doing Calk's 3.0 first, and if I don't like it, I'll try either Unofficial or BluKuban.
And once it's done charging more, and I perform the install, I'll report back, with a screenshot or two as well.
IceCatraz said:
You got it!
I'm doing a GB build - from what I've come across, GB just gets better battery life, and I just feel more comfortable using it. At least, until the official ICS rolls out from Samsung. If that one is well received, and it's worth it, I'll unroot/wipe fresh and try it out.
That being said though, I'll use x2 then. Will it matter if I do both, just for good, measure? (Both x2 and FormatAll)
And yes, I'll be downloading to PC first, then transferring. I feel more comfortable doing it that way. I'll be doing Calk's 3.0 first, and if I don't like it, I'll try either Unofficial or BluKuban.
And once it's done charging more, and I perform the install, I'll report back, with a screenshot or two as well.
Click to expand...
Click to collapse
Just use the wipe x2 that does everything you need. Blu kubans gb rom is good but wifi is whacky. Id go with his ics build. Well your set good luck!
UnOfficial
Alright so, I installed it, and all is working well. It's actually a bit...erm, slow? Whenever I swipe from screen to screen on the homepage it's a bit laggish. But it works! I'll run around with it for a little while and see how it works. I'm in the process of reinstalling my older apps, updating my contacts and such.
Thanks for all of your help!
Edit
A little worried, to be honest. Some of the apps I'm trying to install is giving me the "Package file is invalid" error off of the Google Market. Dropbox, Amazon, etc. Not sure what to make of it, to be honest.
Try and clear the cache for the market. If your using tb try to unmount the sd card if that dont work do fresh installs off the market place . Also go into recovery and clear the cache and dalvik.
UnOfficial
juggalo1300 said:
Try and clear the cache for the market. If your using tb try to unmount the sd card if that dont work do fresh installs off the market place . Also go into recovery and clear the cache and dalvik.
UnOfficial
Click to expand...
Click to collapse
Done. I cleared both caches, and so far, all of the problems I've had with the market is gone. (Dropbox didn't install on the first try, but it did after the second.)
I've replaced the default touchwiz interface with Launcher Pro (TW was running wicked slow - loads of lag with just basic scrolling) and it seems to be running well. And it's definitely saving on battery life.)
That being said, it's not really my cup of tea. I restored my contacts and such, but eh. I think I'll try UnOfficial, and if it's not better, either go back to el29 or update to official ics.
I'll likely keep this one until tomorrow. You've been such a huge help. Thank you so much.
Actually, with launcher pro replacing it, this is pretty good. I want to mess with it more. I'll run it for a few days and see how it fairs.
Ok wait before everyone leaves, Ive got some questions too!
I just got my replacement(after a hard brick trying JB) and figure Id ask my questions in this thread rather than starting a new one..
1. Ive decided to odin EL29 EVERY TIME I want to flash a new rom, just to be safe. If I use CMW with EL29 and decide to try out CM9, Do I always need to flash a aokp kernel? Or is that built into the CM9 install?
2. If I like CM9, and want to make a nandroid backup of it, do I need to Odin back to EL29 first to back it up? Or is it safe to do it with the recovery that comes with CM9?
3. If the answer to #2 is yes, meaning I do have to odin back to EL29, how do I restore my backup? Let me explain:
Lets say I flash CM9, make a nandroid of CM9, then decide to try out say a different rom, like a TW rom. Then I hate the TW rom and wanna restore my backup of CM9. Do I need to ODIN back to EL29 to restore the nandroid? I read in the "how not to brick my..." thread its bad to restore a ICS rom from a GB Kernel. Can someone please explain?
Ive really, really tried to search and read as much as possible before asking, but a lot of the threads are old and have contradicting information. Sorry for being so noobish, but I dont wanna brick my new phone. I come from Evo, Evo3d, Hp Touchpad, etc, where there arent as many issues to flash customs roms. Ive rooted and flashed custom roms ever since the PPC6600, 100's of times and NEVER had a problem. Sorry, this just really confuses me for some reason!!!
Can't help you with CM9 or AOKP because I've never tried either one. The OP was talking about launcher pro. I highly recommend Nova launcher or Apex. They are both specifically built for ICS and look and act like stock android with great customization features.
Was going to make another topic, but I thought I'd ask here first
- The notification tray in this rom (Calk 3.0) is transparent, and I'm not fond of the icons in the Notification Tray. I tried using Rom Tool Box lite to change it, but the tray won't change, no matter what I do. Does anyone know how to fix this? I've tried before - it just won't change.
IceCatraz said:
Was going to make another topic, but I thought I'd ask here first
- The notification tray in this rom (Calk 3.0) is transparent, and I'm not fond of the icons in the Notification Tray. I tried using Rom Tool Box lite to change it, but the tray won't change, no matter what I do. Does anyone know how to fix this? I've tried before - it just won't change.
Click to expand...
Click to collapse
I don't mess with rom tool box. I hear good and bad things about it. If you start at page 1080 and read to the end people post new system ui's but it may theme it a little bit. They have blazers UI in there and one other one I think. I'm not sure it is transparent or not. Or even make a post in the thread about it. I know its still active and you may find your answer. Sorry I can't really help you on this.
Sent from my SPH-D710 using XDA
Alright, cool. Thanks a lot. You wouldn't happen to have the link to that thread, would you? I've searched, and I'm a bit lost. Sorry for the trouble.

[Q] I'm looking for a stock Sprint Jelly Bean 4.1

For whatever reason I have not been offered the OTA L710VPLJ7 update yet. Keis says I'm up to date with L710VPLI3 which is BS. I'm "unrooted" by Voodoo OTA so the update hopefully won't have any problems. I don't care how I get or how I flash (zip, Odin, whatever) it but I'm not interested (for the moment) working with a custom/themed ROM. I just want a stock rooted phone so I can be up to date and work on making wifi hot spot work which I understand is a problem with Jelly Bean. If I can't get it to work I figure I can always resort to my ICS Nandriod backup.
Does anyone have a link to where the actual update might be?
jerryp7 said:
For whatever reason I have not been offered the OTA L710VPLJ7 update yet. Keis says I'm up to date with L710VPLI3 which is BS. I'm "unrooted" by Voodoo OTA so the update hopefully won't have any problems. I don't care how I get or how I flash (zip, Odin, whatever) it but I'm not interested (for the moment) working with a custom/themed ROM. I just want a stock rooted phone so I can be up to date and work on making wifi hot spot work which I understand is a problem with Jelly Bean. If I can't get it to work I figure I can always resort to my ICS Nandriod backup.
Does anyone have a link to where the actual update might be?
Click to expand...
Click to collapse
This is stock rooted: http://forum.xda-developers.com/showthread.php?p=32152586
Sent from my SPH-L710 using xda app-developers app
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
WHYDavid said:
This is stock rooted: http://forum.xda-developers.com/showthread.php?p=32152586
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
That's great. Thanks. I'm guessing of all the multiple choices, this LJ7KernelWithBootanimationSupportFIXED.zip is the one I want. I can use all the battery help I can get. Would you suggest I do the modem flash Galaxy-S-fre3-LJ7FirmwareModemAIO.zip too?
And would you know if I'm safe to just do a cache and Dalvik cache wipe without full factory reset? It would seem so to me but would appreciate a second opinion.
jerryp7 said:
That's great. Thanks. I'm guessing of all the multiple choices, this LJ7KernelWithBootanimationSupportFIXED.zip is the one I want. I can use all the battery help I can get. Would you suggest I do the modem flash Galaxy-S-fre3-LJ7FirmwareModemAIO.zip too?
And would you know if I'm safe to just do a cache and Dalvik cache wipe without full factory reset? It would seem so to me but would appreciate a second opinion.
Click to expand...
Click to collapse
You should be safe to do it without a full wipe. Personally I dont recommend the firmware if anything I say take the lj7 modem and flash just that by itself but really it dont matter
And if u want it heres the official ota modified for cwm/twrp flashing. No wipe necessary
http://androidfilehost.com/?fid=9390135922294523494
Hope you don't mind my caution here but if I'm reading you right http://androidfilehost.com/?fid=9390135922294523494 will basically provide me with the OTA update to JB but rooted - correct. This is exactly what I would prefer.
The main thing is that my wife's GS3 isn't rooted and she has JB now and is showing off by telling her camera "smile" and such. But mainly I want to be able to give her "technical support" by being able to tell her how to do and change things with the same screens she is looking at.
jerryp7 said:
That's great. Thanks. I'm guessing of all the multiple choices, this LJ7KernelWithBootanimationSupportFIXED.zip is the one I want. I can use all the battery help I can get. Would you suggest I do the modem flash Galaxy-S-fre3-LJ7FirmwareModemAIO.zip too?
And would you know if I'm safe to just do a cache and Dalvik cache wipe without full factory reset? It would seem so to me but would appreciate a second opinion.
Click to expand...
Click to collapse
Some people have reported issues with the custom kernel. I've never flashed it. Flash one of the LJ7 roms. Odexed is totally stock, deodexed will give you the ability to add some of the mods you can find in other threads. Flashing either of those will also flash the stock LJ7 kernel. If you do flash the custom kernel and don't like it, you can simply reflash the rom without wiping to get the stock kernel back. Flashing the firmware/aio files will change your modem/radios. They don't have to match the rom. I went LJ7 for rom and firmware, but some report getting better reception with other modems. A lot seems to depend on your location and signal quality. I live in northern IL and only have 3g in my area. I have traveled into areas with LTE and found the LJ7 rom to work fine in both. Others swear by LI3, LIG, LIH, etc. It's super easy to flash them and see what works best for you. You'll find the older ones a little further down on the post I linked you to previously.
Some people flash the rom over ICS roms without issues. Others report problems when flashing over ICS. I wiped everything and did factory reset. When flashing over a JB rom, there shouldn't be any need for a factory reset. Flashing the firmware files definitely does not require a reset or data wipe.
Sent from my SPH-L710 using xda app-developers app
Good data. Thanks. This will make you laugh. 3G? I'm in New York City, 200 feet west of Times Square. 4G is a complete joke. No matter what it constantly searches and drains my battery. If I didn't have the old Sprint unlimited plan I would have changed long ago becasue the Internet is soooo slow.
jerryp7 said:
Good data. Thanks. This will make you laugh. 3G? I'm in New York City, 200 feet west of Times Square. 4G is a complete joke. No matter what it constantly searches and drains my battery. If I didn't have the old Sprint unlimited plan I would have changed long ago becasue the Internet is soooo slow.
Click to expand...
Click to collapse
This is a screen shot of the 4g data speed I got at the very far edge of the westernmost suburbs of Chicago (St. Charles/Elburn area). If it only extended another 15 or 20 miles west, I would be getting it at home.
Sent from my SPH-L710 using xda app-developers app
jerryp7 said:
Hope you don't mind my caution here but if I'm reading you right http://androidfilehost.com/?fid=9390135922294523494 will basically provide me with the OTA update to JB but rooted - correct. This is exactly what I would prefer.
The main thing is that my wife's GS3 isn't rooted and she has JB now and is showing off by telling her camera "smile" and such. But mainly I want to be able to give her "technical support" by being able to tell her how to do and change things with the same screens she is looking at.
Click to expand...
Click to collapse
in case you didn't upgrade yet and still needed insight, no what my file is the official ota from Sprint. but it's modified so it won't check your system and throw the dreaded status 7 error. and you dont have to use stock recovery to flash. it being the actual OTA means wiping isnt needed. to have it rooted just flash the root from recovery zip right after its done
Thanks. I already did it and it's working fine. Hopefully OTA are now disabled becasue moving on from here Sprint will want to down-grade me while thinking they are up-grading me.
My only regret is no longer being able to get wifi hotspot. It used to work sooooo well on my SG2 with ICS (native) and was pretty OK on the GS3 with wifi teather. I'm planning on getting a Nexus 10 and want to be able to wifi so might revert although I'll try USB teather first.
jerryp7 said:
I just want a stock rooted phone so I can be up to date and work on making wifi hot spot work which I understand is a problem with Jelly Bean.
Click to expand...
Click to collapse
This modified WifiTether works on JB. I can confirm it works for me. http://forums.androidcentral.com/sp...652-wifi-tether-jellybean-here-confirmed.html
All right! Thanks. I got it to work too.

S3 Rogers - Looking for ROM/info

I have myself a Rogers based S3, that has the stock Jelly Bean OS on it.
Its bogged down, I don't like it anymore.
I have seen the OS on the Nexus unit's and find it to be WAY better (more fluid, more options and much better UI for texting)
Now for the explanation of this thread....
I have NO idea what I'm doing anymore when it comes to this phone. It's not rooted, NO CWM installed.. And i fear i may brick it if i don't know exactly what i'm doing.
That being said, i would like to go to a stock Google OS, or something very close to it.
What are my options? I would like to try and make this as pain free as possible. As far as i can recall, rooting//cwm and Os load on my captivate was really easy... This time around, i am finding way too many "possible" ways of doing everything. I think more or less, i need to be pointed to the right way so i don't get confused.
Anyone willing to toss me a hand on this one :fingers-crossed:
http://forum.xda-developers.com/showthread.php?t=2343223
Sent from my SAMSUNG-SGH-I747 using Tapatalk 4
Please read forum rules before posting
Questions and Help issues go in Q&A and Help section
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
saj222 said:
http://forum.xda-developers.com/showthread.php?t=2343223
Sent from my SAMSUNG-SGH-I747 using Tapatalk 4
Click to expand...
Click to collapse
Instead of linking me to something I've already read, how about actually saying something.
I'm finding too many "this might work for rogers, this might not"
Last time i followed a tutorial meant for an AT&T unit, I hard bricked the phone, and ended up tossing it
Sorry if it was in the wrong section before Kenny.
How about me not responding at all next time? I know no one is forcing me but its simple enough to find this info by searching. I understand your hesitance... No one wants an expensive brick.
I'll put something together for you later today unless someone else beats me to it. Deal?
js593 said:
What are my options? I would like to try and make this as pain free as possible. As far as i can recall, rooting//cwm and Os load on my captivate was really easy... This time around, i am finding way too many "possible" ways of doing everything. I think more or less, i need to be pointed to the right way so i don't get confused.
Click to expand...
Click to collapse
Good thread to read: http://forum.xda-developers.com/showthread.php?t=1725839
First you need to get root. 2 easy ways here. First one is install a stock rooted ROM with Odin. Look for the Rogers image here: http://forum.xda-developers.com/showthread.php?t=1739426 Second one is to install CF-Root with Odin, here: http://forum.xda-developers.com/showthread.php?t=1963790 Make sure to get the one for I747M. Second option is faster b/c the zip is way smaller. Now you have stock root.
Next get GooManager https://play.google.com/store/apps/details?id=com.s0up.goomanager&hl=en. Run it, press menu and then install open recovery script or something like that. It will install TWRP custom recovery. Now you can flash ROMs. Perform Nandroid backup before commencing flashing.
For a pure Google like experience, give Slimrom or AOKP (Task650) a try. Very stable.
Slim - http://forum.xda-developers.com/showthread.php?t=2085739
AOKP - http://forum.xda-developers.com/showthread.php?t=1766684
Dandroid is the latest stock themed to the hilt like Cyanogenmod. Very stable.
Dandroid - http://forum.xda-developers.com/showthread.php?t=2121506
saj222 said:
Good thread to read: http://forum.xda-developers.com/showthread.php?t=1725839
First you need to get root. 2 easy ways here. First one is install a stock rooted ROM with Odin. Look for the Rogers image here: http://forum.xda-developers.com/showthread.php?t=1739426 Second one is to install CF-Root with Odin, here: http://forum.xda-developers.com/showthread.php?t=1963790 Make sure to get the one for I747M. Second option is faster b/c the zip is way smaller. Now you have stock root.
Next get GooManager https://play.google.com/store/apps/details?id=com.s0up.goomanager&hl=en. Run it, press menu and then install open recovery script or something like that. It will install TWRP custom recovery. Now you can flash ROMs. Perform Nandroid backup before commencing flashing.
For a pure Google like experience, give Slimrom or AOKP (Task650) a try. Very stable.
Slim - http://forum.xda-developers.com/showthread.php?t=2085739
AOKP - http://forum.xda-developers.com/showthread.php?t=1766684
Dandroid is the latest stock themed to the hilt like Cyanogenmod. Very stable.
Dandroid - http://forum.xda-developers.com/showthread.php?t=2121506
Click to expand...
Click to collapse
Thank you very much. I';ll be looking this over and attempting this tonight.
js593 said:
I have myself a Rogers based S3, that has the stock Jelly Bean OS on it.
Its bogged down, I don't like it anymore.
I have seen the OS on the Nexus unit's and find it to be WAY better (more fluid, more options and much better UI for texting)
Now for the explanation of this thread....
I have NO idea what I'm doing anymore when it comes to this phone. It's not rooted, NO CWM installed.. And i fear i may brick it if i don't know exactly what i'm doing.
That being said, i would like to go to a stock Google OS, or something very close to it.
What are my options? I would like to try and make this as pain free as possible. As far as i can recall, rooting//cwm and Os load on my captivate was really easy... This time around, i am finding way too many "possible" ways of doing everything. I think more or less, i need to be pointed to the right way so i don't get confused.
Anyone willing to toss me a hand on this one :fingers-crossed:
Click to expand...
Click to collapse
I'm using Task650 4.2.2. on my Rogers device and IMO it's the best out there. Never bricked my phone and smooth as butter.
thecoach1999 said:
I'm using Task650 4.2.2. on my Rogers device and IMO it's the best out there. Never bricked my phone and smooth as butter.
Click to expand...
Click to collapse
Hey guys.
So i got the phone rooted, and TWRP is installed. I have a NANDROID backup already done, but i'm a little confused on the roms. Could someone help me with this?
Last i recall, the roms were a single file, Ive downloaded the AOKP JB in this thread http://forum.xda-developers.com/showthread.php?t=1766684 but i'm confused on how to install the rom (as its a .zip file, there's multiple files in the folder....)
Thank in advance!
Edit - I tried to flash the rom anyways, and AOKP one Failed and turned up with an error. It comes up saying "Error executing updater binary in zip "
Edit2 - I just managed to flash Dandroid to the S3, but apps are failing to load everywhere. Unsure if this is something to do with the network or anything, but im also not getting LTE with Rogers.... Play store wont connect either (and i did to the Gapps update...?)
js593 said:
Hey guys.
So i got the phone rooted, and TWRP is installed. I have a NANDROID backup already done, but i'm a little confused on the roms. Could someone help me with this?
Last i recall, the roms were a single file, Ive downloaded the AOKP JB in this thread http://forum.xda-developers.com/showthread.php?t=1766684 but i'm confused on how to install the rom (as its a .zip file, there's multiple files in the folder....)
Thank in advance!
Edit - I tried to flash the rom anyways, and AOKP one Failed and turned up with an error. It comes up saying "Error executing updater binary in zip "
Edit2 - I just managed to flash Dandroid to the S3, but apps are failing to load everywhere. Unsure if this is something to do with the network or anything, but im also not getting LTE with Rogers.... Play store wont connect either (and i did to the Gapps update...?)
Click to expand...
Click to collapse
Before flashing you need to wipe. Data, system, dalvik and cache. Oh and before this put the new ROM files and anything you want to keep like pics on the external sdcard.
Do you have an updated bootloader? http://forum.xda-developers.com/showthread.php?t=2321310
Try re downloading the AOKP ROM and flash the while thing (the .zip). Then flash the gapps. You may have a bad download the first time.
With non-touchwiz ROMs you need to install the ROM and gapps. Do not install any gapps with dandroid.
saj222 said:
Before flashing you need to wipe. Data, system, dalvik and cache. Oh and before this put the new ROM files and anything you want to keep like pics on the external sdcard.
Do you have an updated bootloader? http://forum.xda-developers.com/showthread.php?t=2321310
Try re downloading the AOKP ROM and flash the while thing (the .zip). Then flash the gapps. You may have a bad download the first time.
With non-touchwiz ROMs you need to install the ROM and gapps. Do not install any gapps with dandroid.
Click to expand...
Click to collapse
I believe i ran into the issue blindly.
I forgot to update the bootloader before flashing it. Will try again when i get home and report back with anything.
..
fffft said:
If that sorts your issues, then call it done and thank the people that helped you.
The earlier suggestions were good and not to be faulted. However there is more than one way to do most things. So if you are not happy for whatever reason here is a slightly different approach. There are some very stable custom ROMs that are very snappy and have a similar no lag, fluid feel (Google calls this "butter") to them vis a vis the Nexus. So a simple approach to that result would be:
1. Download and install the Samsung S3 V7.0 toolkit (program)
2. Start the toolkit program
Choose "n" when asked if you want to update the program
Choose your phone version. This is probably "53" for you
Choose option #1 from the main menu to install the necessary USB driver to your PC
After the driver is installed, connect your phone to your PC with the Samsung USB cable.
If your phone is currently stable, you can skip steps #3 + 4.
If you are uncertain, then steps #3 + 4 will restore a stock Rogers firmware as a starting point:
3. Go to Samsung updates and download a stock Rogers firmware
4. Install the stock firmware. This is toolkit menu option #8, 4, 2
5. Download the custom Wicked Aroma ROM v10 (main thread here)
6. Copy the Wicked Aroma ROM to your phone. You can do this in windows by going to file manager and drag and drop the Wicked file (leave it zipped) on the "Samsung Mobile MTP Device - Phone/Data" folder icon.
7. Flash the Wicked ROM from "recovery mode"
Ensure that your battery is at least 80% charged. Then turn your phone off and disconnect the USB cable
Push and hold the home button, volume up and power button at the same time until you feel the phone vibrate and see blue text on screen in the upper left hand corner. Then release the buttons.
On the onscreen phone menu, choose wipe (factory reset)
Then choose install and select the Wicked_v10. zip file
The rest of the install will be automated on your phone screen. It will ask you to select a number of options. If you are uncertain, then just leave them at the default settings. Ensure that you leave the wipe cache setting as is when asked. And I'd recommend the stock theme and stock kernel to start. The rest you can leave as is or change to what sounds attractive to you.
Note that the wicked ROM will change your boot splash screen. Most people won't care and it's not that hard to revert if you don't like the logo for some reason. This is the logo that appears for a few seconds when you first power up a phone.
This is a very snappy, pretty much zero lag and stable ROM. I think that you'd like it.
.
Click to expand...
Click to collapse
Thanks for the lengthy reply.
I tried putting the new bootloader on there, and tried re-flashing, but it did the same thing. So, in the mean time i'm going to use the Dandroid rom (didn't install the Gapps) and it seems to be working okay. I just fear a bit as the phone seems to be running much warmer then it usually does....
In the mean time, ill use this one, and see if it makes a difference (it could still be loading all my settings and whatnot, so we'll see what happens. I love the look of this rom though. Very simple, very clean. Exactly what i was looking for. Those samsung stock themes are terrible.... Thanks a bunch for the help people. Greatly appreciate it!
Personal taste varies a lot and there are a lot of themed ROMs on this site. So you should be able to find something that you like. It sounds like you want something snappy and Spartan looking. If you like your results so far, then no need to go any further.
If you end up trying the Wicked ROM, perhaps choose the Miui or Holo launcher and ASOP lock screen options.
There are an endless variety of home screen themes to be discovered. And no way to know what you might like. A few random screen shots:
http://media02.hongkiat.com/cool-android-homescreens/Clood.jpg
http://media02.hongkiat.com/cool-android-homescreens/evening.jpg
http://main.makeuseoflimited.netdna-cdn.com/wp-content/uploads/2012/09/jb_holo_launcher.jpg
http://i380.photobucket.com/albums/oo248/jb-dan/DroidInc/d4281332.jpg
http://mycolorscreen.com/wp-content/uploads/homescreens_2012/270592/KLPOS7.png
http://desktopspotting.com/wp-content/uploads/2011/12/Minimal-Android-Home-screen.png
.
Just installed the Wicked rom on my S3. NICE! Need to play with the settings a bit to get it configured the way I like, but a definite keeper.
Very nice job.....Kudos!

Samsung Galaxy S4 Problem

Hello everyone,
I really need your help with my wife's Metro PCS Samsung GS4 M919N.
The thing is, we are now living outside the US so I had to unlock her phone. After ordering the unlock codes, I decided to root the phone and use a custom ROM while waiting for the codes.
That is why I found this guide here: androidforums.com/metropcs-galaxy-s4-all-things-root/790899-metropcs-galaxy-s4-all-things-root-guide.html
So while reading the guide, I aimed to have the following accomplished at the end:
Recovery: TWRP
Custom ROM: CyanogenMod 10.2.1
I then started doing the guide for the TWRP recovery by using Odin. I got the message saying that the flashing passed and went ahead to restart to recovery to install CM 10.2.1 as a custom ROM. The thing is that I keep on restarting to the stock recovery not TWRP. So I went to YouTube and found a video showing how to flash TWRP using GooManager. After following that guide, I went to restart to recovery and I successfully got into TWRP.
Now, to achieve my goal, all that's left to do is to flash CyanogenMod 10.2.1 (jfltetmo).
Before doing that, I decided to make a backup. After using TWRP to do a backup, I proceeded to installing the custom ROM + gapps (wiped with the default settings). Everything was working I think (I handed the phone to my wife so she was he one testing it). After some time, she decided she wants the stock ROM instead so I decided to download the androidforums.com/metropcs-galaxy-s4-all-things-root/783769-rom-recovery-flash-able-stock-m919nuvuamf2-rooted-deodexed-rom.html ROM.
I flashed the newly downloaded ROM + gapps (same file). This time, I couldn't get the gapps to work probably because it was meant for another version. So I decided to just restore from the backup I created earlier.
So, the usual stuff. Wipe. Restore. Restart.
Seems to be going smoothly because my wife was happy to see the old ROM she was used to.
Until the phone started to restart on it's own. (It's pretty much downhill from here on out).
At first I thought it was just a random thing that probably would never happen again. I was wrong as it became more frequent as days went by.
Recently I can't just restart the phone, I would have to remove the battery and then restart it. Now, it's getting really hard to restart the phone. Please help me fix this. I prefer to leave the phone rooted, but if the fix unroots the phone then so be it, anyway my wife prefers the stock ROM so only the unlocking was necessary.
Metro PCS Samsung Galaxy S4 M919N
Recovery:
TWRP 2.6.3.1
ROMs:
Stock Metro PCS
CyanogenMod 10.2.1
Let me know if you need more information from me. Hopefully I can restart the phone so I can give you some version numbers.
Thanks everyone!
I didn't read everything but just wanted to say
VERY GOOD THREAD!
this is how threads should be done. Very descriptive, organized, told us everything you did and asked for help! Good job man! Only negative is it prolly should have gone in Q&A section but irregardless very good thread!
About your issue, I recommend flashing stock Odin tar file to everything back to stock and reroot and start over. Flashing stock will not lock it again it will remain unlocked. But should get you back up and fresh. Just be aware it will erase all your data and all of the internal SD card.
Sent from my SGH-M919 using Tapatalk
dokgu said:
Hello everyone,
I really need your help with my wife's Metro PCS Samsung GS4 M919N.
The thing is, we are now living outside the US so I had to unlock her phone. After ordering the unlock codes, I decided to root the phone and use a custom ROM while waiting for the codes.
That is why I found this guide here: androidforums.com/metropcs-galaxy-s4-all-things-root/790899-metropcs-galaxy-s4-all-things-root-guide.html
So while reading the guide, I aimed to have the following accomplished at the end:
Recovery: TWRP
Custom ROM: CyanogenMod 10.2.1
I then started doing the guide for the TWRP recovery by using Odin. I got the message saying that the flashing passed and went ahead to restart to recovery to install CM 10.2.1 as a custom ROM. The thing is that I keep on restarting to the stock recovery not TWRP. So I went to YouTube and found a video showing how to flash TWRP using GooManager. After following that guide, I went to restart to recovery and I successfully got into TWRP.
Now, to achieve my goal, all that's left to do is to flash CyanogenMod 10.2.1 (jfltetmo).
Before doing that, I decided to make a backup. After using TWRP to do a backup, I proceeded to installing the custom ROM + gapps (wiped with the default settings). Everything was working I think (I handed the phone to my wife so she was he one testing it). After some time, she decided she wants the stock ROM instead so I decided to download the androidforums.com/metropcs-galaxy-s4-all-things-root/783769-rom-recovery-flash-able-stock-m919nuvuamf2-rooted-deodexed-rom.html ROM.
I flashed the newly downloaded ROM + gapps (same file). This time, I couldn't get the gapps to work probably because it was meant for another version. So I decided to just restore from the backup I created earlier.
So, the usual stuff. Wipe. Restore. Restart.
Seems to be going smoothly because my wife was happy to see the old ROM she was used to.
Until the phone started to restart on it's own. (It's pretty much downhill from here on out).
At first I thought it was just a random thing that probably would never happen again. I was wrong as it became more frequent as days went by.
Recently I can't just restart the phone, I would have to remove the battery and then restart it. Now, it's getting really hard to restart the phone. Please help me fix this. I prefer to leave the phone rooted, but if the fix unroots the phone then so be it, anyway my wife prefers the stock ROM so only the unlocking was necessary.
Metro PCS Samsung Galaxy S4 M919N
Recovery:
TWRP 2.6.3.1
ROMs:
Stock Metro PCS
CyanogenMod 10.2.1
Let me know if you need more information from me. Hopefully I can restart the phone so I can give you some version numbers.
Thanks everyone!
Click to expand...
Click to collapse
I agree with Elesbb. If the goal is jus tto get back to stock, just do an odin flash of the stock ROM. Be advised if you flash the latest Kit Kay update you will nto be able to go back to Jelly Bean. From your post it seems like you are partial to Jelly Bean. So if that's what you want, but sure you use the stock 4.3 ROM. You can find it around here on XDA somewhere with a quick search to make sure you have the right one.
As Elesbb said, you won't loose the 'sim unlock'. But you will lose root. However you can root the stock ROM just fine.
You might also consider one of the myriad of TouchWiz based custom ROMs. They are look just like TouchWiz that your wife wants, but have a lot of optimizations and options in them. Those should flash just like any ROM. If you still get the reboot issue then do the Odin back to stock, reroot, then flash the custom TW roms.
---------- Post added at 12:46 PM ---------- Previous post was at 12:45 PM ----------
Thread cleaned.
Rather than bashing a ROM or user let's keep on topic and help the OP resolved the problems he's having. Arguing over the virtues of a ROM doesn't help anyone.
Thank you,
Rwilco12
Before posting this thread I sent the aforementioned guide's poster (arocker). He sent me a reply saying not to use gapps as the stock ROM for Metro PCS already comes with Google apps. I'll try his suggestion first and see if the phone still reboots a lot.
If the problem persists, I will try the solutions mentioned here. Thanks a lot!
elesbb said:
I didn't read everything but just wanted to say
VERY GOOD THREAD!
this is how threads should be done. Very descriptive, organized, told us everything you did and asked for help! Good job man! Only negative is it prolly should have gone in Q&A section but irregardless very good thread!
About your issue, I recommend flashing stock Odin tar file to everything back to stock and reroot and start over. Flashing stock will not lock it again it will remain unlocked. But should get you back up and fresh. Just be aware it will erase all your data and all of the internal SD card.
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
After trying arocker's suggestion to not flash gapps, the phone still reboots. So now, I am going to try your solution guys.
But before I do, I want to make sure that I am on the correct paths/links.
Here's what I found for the following:
ODIN
forum.xda-developers.com/galaxy-s3/themes-apps/27-08-2013-odin-3-09-odin-1-85-versions-t2189539
I've had a couple of chances to use ODIN but only using specific functions like flashing a recovery file while the phone is in download mode. I don't however have any experience using ODIN to put the phone back to stock where the phone gets unrooted. Having the phone unrooted is fine by me as I only needed to have the phone unlocked.
Any step-by-step guides for using ODIN for this specific purpose guys? I don't want to mess this up again.
Thanks and sorry for the trouble.
dokgu said:
After trying arocker's suggestion to not flash gapps, the phone still reboots. So now, I am going to try your solution guys.
But before I do, I want to make sure that I am on the correct paths/links.
Here's what I found for the following:
ODIN
forum.xda-developers.com/galaxy-s3/themes-apps/27-08-2013-odin-3-09-odin-1-85-versions-t2189539
I've had a couple of chances to use ODIN but only using specific functions like flashing a recovery file while the phone is in download mode. I don't however have any experience using ODIN to put the phone back to stock where the phone gets unrooted. Having the phone unrooted is fine by me as I only needed to have the phone unlocked.
Any step-by-step guides for using ODIN for this specific purpose guys? I don't want to mess this up again.
Thanks and sorry for the trouble.
Click to expand...
Click to collapse
No trouble at all, check out the stickies in the beginning of threads.
Look for guides similar to this.
http://forum.xda-developers.com/showthread.php?t=2335109
Pp. Good luck.
sent from my bluetooth controlled toaster.
PanchoPlanet said:
No trouble at all, check out the stickies in the beginning of threads.
Look for guides similar to this.
http://forum.xda-developers.com/showthread.php?t=2335109
Pp. Good luck.
sent from my bluetooth controlled toaster.
Click to expand...
Click to collapse
Hello PanchoPlanet,
Thanks for the link. I went ahead and tried to unroot without Windows (Mobile Odin) as per the instructions on the link. I downloaded everything and went ahead to install the Mobile Odin APK. When I ran it to install the Flash Kernel, the app told me that the device is not supported.
To my understanding the guide is for M919 devices but should work for my wife's device as well (M919N - Metro PCS). I would like to try the guide for using Windows but I'm not really expecting for it to work or I might mess it up more. I'll try to search some more and provide the links where this forum will lead me to. But if you have any ideas, please let me know asap. Thanks!
PanchoPlanet said:
No trouble at all, check out the stickies in the beginning of threads.
Look for guides similar to this.
http://forum.xda-developers.com/showthread.php?t=2335109
Pp. Good luck.
sent from my bluetooth controlled toaster.
Click to expand...
Click to collapse
Ok, here's what I found:
forum.xda-developers.com/showthread.php?t=2446497
It seems like the perfect thread for what I am trying to achieve. Will let you guys know if it is successful. But it will have to wait for tomorrow. Gonna catch some sleep.
Okay, I'm running out of options. I was able to flash the stock ROM using Odin 3.07. The recovery looks like it came back to the stock recovery as I no longer have TWRP installed. When I install Root Checker, I see that I am no longer rooted. That's good.
But my original problem is still here. The phone reboots a lot. The phone is so unstable that it is barely usable.
I am now going to try one more thing.
I have a Galaxy S4 (I337M) from Rogers Canada (my wife has Metro PCS M919N). Mine got rooted and has CyanogenMod 10.2.1 as a custom ROM. My phone is working perfectly while hers reboots a lot. I was thinking it was because of a faulty battery. So I am doing an experiment by swapping the batteries. So far no reboots have occurred, but I will continue to monitor this.
Any ideas why the battery is kinda messed up?
This thread talks about battery stuff and reboots:
http://au.ibtimes.com/articles/530338/20131216/samsung-galaxy-s4-problems.htm
Batteries can go bad a lot of ways. Extreme temperature, factory defect, phone drops, moisture, etc.
Sent from my SGH-M919 using XDA Premium 4 mobile app
Android_Monsters said:
This thread talks about battery stuff and reboots:
http://au.ibtimes.com/articles/530338/20131216/samsung-galaxy-s4-problems.htm
Batteries can go bad a lot of ways. Extreme temperature, factory defect, phone drops, moisture, etc.
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
And 100% of the time, they eventually just get old.
dokgu said:
Okay, I'm running out of options. I was able to flash the stock ROM using Odin 3.07. The recovery looks like it came back to the stock recovery as I no longer have TWRP installed. When I install Root Checker, I see that I am no longer rooted. That's good.
But my original problem is still here. The phone reboots a lot. The phone is so unstable that it is barely usable.
I am now going to try one more thing.
I have a Galaxy S4 (I337M) from Rogers Canada (my wife has Metro PCS M919N). Mine got rooted and has CyanogenMod 10.2.1 as a custom ROM. My phone is working perfectly while hers reboots a lot. I was thinking it was because of a faulty battery. So I am doing an experiment by swapping the batteries. So far no reboots have occurred, but I will continue to monitor this.
Any ideas why the battery is kinda messed up?
Click to expand...
Click to collapse
That's a wierd situation, by swapping batteries you basically performed a battery pull, which acts as a reset, that in it self may have cleared your issue.
Now if battery is bad that could be an unusual problem. Maybe just replacing the battery will be the end of your mystery.
Pp.
sent from my P5113 using TouchPal mind control keyboard. (Beta)
The battery should be brand new as the phone was just recently purchased this April.
Anyways, so far no reboots have happened and any instability has not been shown at all. Everything looks ok, yet.
Anyone know if it is safe to swap batteries? Our phones have different S4 models. I'm not sure what the implications would be. Also what is this battery pull which acts as a reset? We've been pulling the battery a lot of times but the reboot still happens but not when we swapped batteries.
The batteries are all the same. Don't worry about that.
Even if its a new battery if could have just been bad. A manufacturing defect perhaps.
Sent from your phone. You should be more careful where you leave that thing.
dokgu said:
The battery should be brand new as the phone was just recently purchased this April.
Anyways, so far no reboots have happened and any instability has not been shown at all. Everything looks ok, yet.
Anyone know if it is safe to swap batteries? Our phones have different S4 models. I'm not sure what the implications would be. Also what is this battery pull which acts as a reset? We've been pulling the battery a lot of times but the reboot still happens but not when we swapped batteries.
Click to expand...
Click to collapse
This battery thing is wacky, anyway swapping batteries should not be a problem, it's just an energy storage container. Pulling the battery isn't like powering down the phone or resetting/rebooting ,sometimes devs request a battery pull to get the proper wipe effect that reboots can't provide.
You inadvertently solved your problem by accident. That's a good thing.
Pp.
sent from my P5113 using TouchPal mind control keyboard. (Beta)
PanchoPlanet said:
You inadvertently solved your problem by accident. That's a good thing.
Click to expand...
Click to collapse
I have quite literally solved the vast majority of my problems this way.
Its a preferred method.
Sent from your phone. You should be more careful where you leave that thing.
Sometimes it's that "total disconnect "of power that kind of gets all the ducks lined up in a row and everything flows in the dynaflow.
Good.
Pp.
sent from my P5113 using TouchPal mind control keyboard. (Beta)
its very important topics and it might seen for every galaxy s4 users.just wonderful topics.
This exact same thing happened on my mother's 6-month old S3. If you're still wondering, you could try putting the old battery and running a CPU stress test app. It should increase the current draw and trigger a shutdown.
EDIT: whoops, sorry to kind of zombie. Didn't check the date.
Sent from my Galaxy S4

Categories

Resources