Related
hey guys:
Please help? Where can I download a pit file for s7560m
pokerplayer999 said:
hey guys:
Please help? Where can I download a pit file for s7560m
Click to expand...
Click to collapse
Why do you need a pit file? The only reason would be for flashing a ROM in Odin, and we don't yet have an Odin ROM for the GT-S7560M Ace II X. If you just want a partition table, I can give that to you.
reason for pit files
Codename13 said:
Why do you need a pit file? The only reason would be for flashing a ROM in Odin, and we don't yet have an Odin ROM for the GT-S7560M Ace II X. If you just want a partition table, I can give that to you.
Click to expand...
Click to collapse
I don't know If that's what I want, s7650m has a problem with the serial number, "000000000", and it doesn't recognize any sim card, so I figure if I can get a pit file for my s7650m and reflash the entire phone with a stock rom, that might resovle my problem.
pokerplayer999 said:
I don't know If that's what I want, s7650m has a problem with the serial number, "000000000", and it doesn't recognize any sim card, so I figure if I can get a pit file for my s7650m and reflash the entire phone with a stock rom, that might resovle my problem.
Click to expand...
Click to collapse
No, but we don't yet have a stock ROM for our device. Samsung seems to have screwed us by not releasing a stock ROM for us, The closed thing we have is some Samsung open source files that can be used along with compiled 4.0.4 to make a stock ROM. Tell me, what is your service provider? I think I can help if you answer that question.
Thank you so much for ur help, my service provider will be virgin mobile, which is in North America Canada; however I travel back and forth between Hong Kong, China and Canada alot, do u think this can be done so my phone can be use in all these places.
Codename13 said:
Why do you need a pit file? The only reason would be for flashing a ROM in Odin, and we don't yet have an Odin ROM for the GT-S7560M Ace II X. If you just want a partition table, I can give that to you.
Click to expand...
Click to collapse
please post the partiton table i need it urgenly
Hi everybody,
This is Steven from Hong Kong, I am looking for a PIT file for Tab3 10 16GB.....
Since i used a China made 1-click root tools, my tab became brick .....
I tried to use odin to flash stock rom, but it show me a error message talking about partition problem
Then i tried flash bindroid recovery, and found out that cannot mount sd card,
So I am looking for as PIT file to solve my problem.....
Have you tried to do a full firmware recovery in Kies?
Also the PIT file I think is needed is: GT-P5210_EUR_XX_20130523.pit & unfortunately the only place I've seen it is behind a pay wall.
Gilly10 said:
Have you tried to do a full firmware recovery in Kies?
Also the PIT file I think is needed is: GT-P5210_EUR_XX_20130523.pit & unfortunately the only place I've seen it is behind a pay wall.
Click to expand...
Click to collapse
Thank you for your reply,
I tried to use Kies to do recovery...but it keeping in setting up connection....
Hi There
I've rooted my tablet and installed SuperSamsungV2 and everything worked.
I then inserted a 32GB SDcard and went to TWRP to format as ext4...and hoenstly I'm not sure what happend
I couldn't go into recovery or anything after I tried formatting the SDCard (maybe I had selected something that I shouldn't...)
It goes into download mode (I can make it go to ODIN mode by pressing POWER+VOL DOWN+HOME)...
I then tried to flash the TWRP recovery again, but it gives me an error about missing or corrupt PIT file.
Can I reflash the stock Samsung firmware (KNOX is triggered now)..or can someone send me a PIT file for the European/Nordic LTE version
which I then can install using ODIN (or is heimdall better ?)
I found this using the SamMobile.com firmware database : T805XXU1ANFB_T805NEE1ANF2_NEE
Will I brick my tablet by flashing this firmware..and can I flash at all when the PIT file is missing ?
I don't care if I loss my data or anything, just want me tablet back. And I don't mind re-rooting it either.
Right now I can't turn the tablet off or trigger it to recovery at all. so All I can do for now is letting it run out of battery...
If you need more info, please let me know...
Thanks for any help
Hi
I've found I pit file for the T800 ( http://forum.xda-developers.com/showthread.php?p=54428490). I would really appreciate if someone with a T805 either can verify that the T800 and T805 share the same pit file. Or if someone can extract their pit file from their T805 using the Heimdall and pitmagic tools. And upload it here. I'll then verify it.
I'm afraid that using wrong pit will brick my device completely...
Any help is very much appreciated, thanks
Hi,
I just brick my i747 and after use debrick image of 4.4.2 my phone alive but problem is phone do not boot without sd card, someone suggest me to flash first I747UCUFNE4 4.4.2 bootloader file along with pit file , later install 4.4.2, so I dont have these fiels, really appreciate if someone help in this issue, thanks br
this will get you the UCUFNE4 bootloader and modem.
http://forum.xda-developers.com/showthread.php?t=2808654
sorry i dont have the pit file.
good luck, and remember that once you upgrade to KK ; you CANNOT downgrade or you will BRICK.
err on the side of kindness
This might help for the pit file: http://forum.xda-developers.com/showthread.php?t=1848264
thanks both of your, porblem solved
Im new to all of this, but I screwed up my phone flashing a stock image. Odin does see my phone but I get a error when i try to flash a pda file. ( I guess I get that error because im downgrading the software???) Anyway can someone point me in the right direction so i can download firmware where I do not get a error.
Also I am using odin 3.07
hunter99507 said:
Im new to all of this, but I screwed up my phone flashing a stock image. Odin does see my phone but I get a error when i try to flash a pda file. ( I guess I get that error because im downgrading the software???) Anyway can someone point me in the right direction so i can download firmware where I do not get a error.
Also I am using odin 3.07
Click to expand...
Click to collapse
post complete history of your phone
hunter99507 said:
Im new to all of this, but I screwed up my phone flashing a stock image. Odin does see my phone but I get a error when i try to flash a pda file. ( I guess I get that error because im downgrading the software???) Anyway can someone point me in the right direction so i can download firmware where I do not get a error.
Also I am using odin 3.07
Click to expand...
Click to collapse
What bootloader is on your phone? If you don't know, boot into download mode and look for a reference to warranty bit. If you see something about warranty bit, that means you have at least a 4.3 bootloader and you can't flash a stock ROM unless the ROM was compiled for flashing in Odin.
If you have at least the 4.3 bootloader, I suggest flashing Philz Touch custom recovery via Odin. Copy a CM10.2 or early CM11 ROM onto an external SD card, boot into recovery, and flash the ROM. This will at least get you phone running to determine exactly which bootloader and baseband are on your phone.
I'm not sure what bootloader I was on, I think it was mjb software . I assume I was on the latest and I tried to flash a previous version and now my phone is hard bricked. I bought a jig on eBay and it should come early this week. I guess what my next question is, is if I can get into download mode using the jig, what software would I need to flash using Odin 3.09.
Sorry I'm kinda new to Odin and the gs3 flashinng so I'm not familiar with it (I also have a nexus 5 so I'm used to using fastboot). Could someone post what files I need to get my gs3 back in order assuming I can get into download mode?
Thank you for all of your help, it sucks having a bricked phone and not really knowing how to fix it.
Does your phone turn on at all? If not, a jig probably won't help.
It does but doesnt turn on. When i hold the power button nothing happens and it does not vibrate. But when i plug it into the computer the usb sound goes off and the red led comes on (Charging phone LED). Do you think a jig will help?
When you connect the phone, what does it say in device manager? Of it says something like qusb load, it may be hard bricked.
audit13 said:
When you connect the phone, what does it say in device manager? Of it says something like qusb load, it may be hard bricked.
Click to expand...
Click to collapse
When i plug it into the computer it shows up as "Qualcomm HS-USB QDLoader 9008 (COM7)"
Does that mean im screwed? Is there anything I can do?
Since the phone will not go into download or recovery, you may have to have it jtagged. Before doing that, did you try to de-brick it?
This may help too: http://forum.xda-developers.com/showthread.php?t=2549068
Here is the PIT for Android Version 4.4.2
nsnobel2 said:
Hi,
I just brick my i747 and after use debrick image of 4.4.2 my phone alive but problem is phone do not boot without sd card, someone suggest me to flash first I747UCUFNE4 4.4.2 bootloader file along with pit file , later install 4.4.2, so I dont have these fiels, really appreciate if someone help in this issue, thanks br
Click to expand...
Click to collapse
4shared.com PIT_16GB_I747UCUFNE4_ATT_Andro id_4_4_2
What d'you mean?
01manu said:
4shared.com PIT_16GB_I747UCUFNE4_ATT_Andro id_4_4_2
Click to expand...
Click to collapse
D'you mean to search 4shared.com for "PIT_16GB_I747UCUFNE4_ATT_Android_4_4_2"?
pit samsung att android 4.4.2
LeDroidDummy said:
D'you mean to search 4shared.com for "PIT_16GB_I747UCUFNE4_ATT_Android_4_4_2"?
Click to expand...
Click to collapse
yes and writeme to [email protected] for the passwd o for the file and passwd
Thanks but...
01manu said:
yes and writeme to [email protected] for the passwd o for the file and passwd
Click to expand...
Click to collapse
Thanks 01manu, but when I search for that, there's a lot of results. Which one is it? (4shared{dot}com /web/q/#query=PIT_16GB_I747UCUFNE4_ATT_Android_4_4_2)
Here, try this.
https://forum.xda-developers.com/showthread.php?t=1848264
That should be the PIT file you need.
Hey folks,
Does anyone know how to revert to stable from the One UI 3.0 beta? I tried what Samsung has listed in the disclaimer but Smart Switch doesn't offer a "Downgrade" options. Thanks!
Download the firmware and flash with odin. That should work.
You'll lose all data you have on your phone.
Atomix96 said:
Hey folks,
Does anyone know how to revert to stable from the One UI 3.0 beta? I tried what Samsung has listed in the disclaimer but Smart Switch doesn't offer a "Downgrade" options. Thanks!
Click to expand...
Click to collapse
Running into the same issue.
flash firmware of your choice in odin
elliwigy said:
flash firmware of your choice in odin
Click to expand...
Click to collapse
So I did that and was successful. However, now the system memory usage is 46.9GB (which is insane). Any suggestions on that? I've done a factory reset via recovery twice.
Atomix96 said:
So I did that and was successful. However, now the system memory usage is 46.9GB (which is insane). Any suggestions on that? I've done a factory reset via recovery twice.
Click to expand...
Click to collapse
Does anyone have any ideas about this? I am seeing the same thing, did not revert but storage almost doubled.
mopartonyg said:
Does anyone have any ideas about this? I am seeing the same thing, did not revert but storage almost doubled.
Click to expand...
Click to collapse
I never found a way to fix this. Flashed multiple times. Not gonna worry about it.
Atomix96 said:
So I did that and was successful. However, now the system memory usage is 46.9GB (which is insane). Any suggestions on that? I've done a factory reset via recovery twice.
Click to expand...
Click to collapse
did u use pit file with repartition checked when flashing in odin? i assume not sibce that would fix ur problem ?
mopartonyg said:
Does anyone have any ideas about this? I am seeing the same thing, did not revert but storage almost doubled.
Click to expand...
Click to collapse
you need to use pit on pit tab then select repartition in settings in odin.. pit file just extract from the csc.tar file in your firmware
elliwigy said:
you need to use pit on pit tab then select repartition in settings in odin.. pit file just extract from the csc.tar file in your firmware
Click to expand...
Click to collapse
Can I flash just the pit file or do I need to start over?
Never mind, Google it. Can not flash pit by itself.
OK read somemore and figured out you can flash pit file alone. Extracted pit from csc and flashed through Odin and storage seams to be back to normal 24GB for system 104 for storage.
If on sprint or tmo use patched odin and flash BTHD use frija or samfirm to get proper firmware for your phone, and like someone stated earlier will lose all data will have to perform a factory data reset