Hi,
I'm genuinely sorry if this is an often repeated thread, but I couldn't find anyone here suffering from exactly the same symptons as me.
I've had my One X for a couple of months, it's completely unrooted and has nothing on it you can't get from Google's app market. I'm with Orange, in the UK, so the phone's running all their default stuff.
My phone's been running quite hot ever since I got it, but, today, I had it in my pocket while I drove to work (20) minutes, and it must have overheated and turned itself off.
I couldn't turn it on, and, in my panic, I held the power button for ten seconds, and saw the buttons at the bottom flash. Since then, nothing at all, no charging light (from USB or mains). I've tried all combinations of power/volume button presses and absolutely nothing has happened at all. Nothing at all since the first button flashes on the first long power button press (10 seconds). Now, it's been like that for about 8 hours and has been on and off charge all day, to no avail. (no LED at all, at any point, red nor green).
I've just got back from holiday and have a tonne of pictures and vids I have probably lost, but want to try to recover. I'd be really, really grateful for the assistance of the experienced people here. I'm, as you may have picked up, a hopeless newb.
When I connect via laptop to USB, the computer (Windows 7) detects an APX device, whatever that is, but the automated driver installation fails. Nothing shows up in Windows explorer.
Is there anything I/You/We can do?
My last resort is to send it back to Orange, and ask if they can retrieve data, but I expect they'll just send a new phone and wipe/refurbish my old one for someone else.
Is it possible to send phones back to HTC for repair, without losing data?
And finally, although I've not seen anything on the screen at all, no bootloaders, no recovery screen, nothing, might some combinatin of my button-mashing have already wiped the phone?
On a scale of One to OH DEAR...how screwed am I?
Please help me, XDA!
Edit: Ah, I can see it as a device, actually. Shows up as an "APX Device", but I can't do anything with it.
Did you press power + volume up?
If so, it's in "bricked state" now and only HTC can recover it.
Sent from my HTC One X using xda app-developers app
Flo95 said:
Did you press power + volume up?
If so, it's in "bricked state" now and only HTC can recover it.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Yeah, I think once I tried everything else I tried that.
Is this what NVFlash can get around on other phones, but not the One X?
Assuming that's what I have done, will HTC be able to recover my personal data? I don't care about app-data, just photos and vids.
Should I go through HTC directly, or through my mobile network/carrier? The phone should still be in warranty, it's only a couple of months old.
Edit: Although, one thing to add to that is that at no point, apart from the very first 10-second power button press, did anything happen on the phone at all. If that makes any difference, at all.
I had a chat to an HTC customer services bod, who said that even if they can recover data during a phone repair they automatically wipe it, due to the Data Protection Act (UK).
Anyone happen to know if you can waive your right to data portection in certain instances?
JimBadger said:
I had a chat to an HTC customer services bod, who said that even if they can recover data during a phone repair they automatically wipe it, due to the Data Protection Act (UK).
Anyone happen to know if you can waive your right to data portection in certain instances?
Click to expand...
Click to collapse
trust me, backup and restore, even if you waived your rights and htc confirmed they wouldn't wipe it, i guarantee you 100% you would still get a phone back that has been wiped.
lawrence750 said:
trust me, backup and restore, even if you waived your rights and htc confirmed they wouldn't wipe it, i guarantee you 100% you would still get a phone back that has been wiped.
Click to expand...
Click to collapse
I know you're probably spot on there. It's potentially more trouble to HTC than it's worth, to go messing with personal data.
But, my phone's all but dead. I can't backup and restore.
Unless I can figure out how to make sense of this "APX" device detection thing.
Can I still somehow root my phone, if the only "access" I ahve to it is seeing it as an APX device? I can't do anything with it. I can't get into the bootloader to unlock it to allow rooting.
Or can I?
would a battery pull prompt the phone to start normally again possibly? The phone isn't hard to open, but htc will probably know if it has been since you might make a mess of some of the glue and shields in there.
Edit: Did you ever enter your dropbox details into your OneX? because it should have auto camera upload on by default. Check your camera upload folder of your dropbox on the web if so.
This may be useful for the s off development. It seems overheat protection may trigger apx
Sent from my HTC One X using Tapatalk 2
If I get desperate enough I might try pulling it open....
I never setup Dropbox, unfortunately. Nice idea though, and I sure as hell will next time.
If my phone's death can further the cause of open One X's for all, then I'm all for it. At this point, I'd pay someone to try and get my data off, too.
If someone wants to talk me through trying to access it in this "apparent" APX mode, I'm up for experimenting.
unfortunately I am also in the same situation,
my HTC OneX has a MIUI ROM, and today while I was playing it is locked, I pressed for 5 seconds the power button and the phone will go off at the time of restart anything! black screen and each function has ceased to work!
the strange thing is that for some time the FlashBoot worked, now no longer even that!
someone has found a solution to at least access to the memory to retrieve the data?
please help me
bubu said:
unfortunately I am also in the same situation,
my HTC OneX has a MIUI ROM, and today while I was playing it is locked, I pressed for 5 seconds the power button and the phone will go off at the time of restart anything! black screen and each function has ceased to work!
the strange thing is that for some time the FlashBoot worked, now no longer even that!
someone has found a solution to at least access to the memory to retrieve the data?
please help me
Click to expand...
Click to collapse
Your stuck in apx mode? You can't fix it afaik...
Can you access Bootloader?
-Sent from my IceCold One X!
hello,
unfortunately the phone does not give any sign of life, does not turn on even light that indicates that the phone is charging when connected to the PC will not connect adb and fastboot does not work.
I just want to retrieve the information that is in storage, my photos and some bailouts of applications, I do not care to save the phone.
is it possible? tell me yes please!
bubu said:
hello,
unfortunately the phone does not give any sign of life, does not turn on even light that indicates that the phone is charging when connected to the PC will not connect adb and fastboot does not work.
I just want to retrieve the information that is in storage, my photos and some bailouts of applications, I do not care to save the phone.
is it possible? tell me yes please!
Click to expand...
Click to collapse
Put your phone on wall charger for 5-7 hours and then press power button + volume down button until the Bootloader shows up...
However, if you can't access the Bootloader even now... Your screwed. ..
I had the same situation.mine was flashed in a wrong firmware then it stuck in a bootloop.but when i tried to charge it for two hours in order to flash RUU, the device went extremely hot, it's late when I noticed it.After removing the usb charger, from then on my device doesnt power on.no sign of life after all.
Related
Hi,
I received a LG GW910 from the DevConnections conference. I was playing with the remote services available through the live.com device center and performed a remote erase of the device. It seems like it did not complete as now all I get when powering on the device is a white LG logo, or I can enter the "connecting kitl" screen. When in either screen I cannot power off the device or anything else. Is there anything I can do to restore the device to a working condition?
Thank you!
I don't know much about how this works but I would try to remove the device from windowsphone.live.com so that your Live ID isn't associated with it anymore. Just a wild guess.
No joy, but thanks for the idea. I don't think its loading the 'OS' even. Is there a way to restore the 'OS' from anywhere?
There's usually a combination of hardware keys you need to press to do a hard reset. Check the manual for your phone.
Thanks buddy, but if there is, I haven't found them yet.
I'll keep digging..
There is a Hard Reset option:
Originally Posted by sutt359
If you hold down both Vol buttons at start-up you can hard reset
Click to expand...
Click to collapse
taken from the Tips and Tricks Thread.
Hope I could help you
L-Dani
dimitrii01 said:
Hi,
I received a LG GW910 from the DevConnections conference. I was playing with the remote services available through the live.com device center and performed a remote erase of the device. It seems like it did not complete as now all I get when powering on the device is a white LG logo, or I can enter the "connecting kitl" screen. When in either screen I cannot power off the device or anything else. Is there anything I can do to restore the device to a working condition?
Thank you!
Click to expand...
Click to collapse
I did this with the dev device I was allowed to borrow same one the GW910, I plugged it into the mains and had dinner, it was back at the OOBE screen when I got back, scared the crap outta me as the device is on loan and I thought I bricked it.
If you push both volume buttons at startup (on this device) it just takes you to the "connecting kitl" screen. At that point, what should I do to reset the device?
I tried connecting it to a kettle and a kitten and some cattle, but it didn't help, although I think I plugged it in the wrong port on the cattle
I just did this to my phone as I have to return it due to bad reception in my area.
Once reset it stayed at the HTC white boot screen. I pulled the battery and it reset just fine.
Back to setup again on the phone.
ckacey said:
I did this with the dev device I was allowed to borrow same one the GW910, I plugged it into the mains and had dinner, it was back at the OOBE screen when I got back, scared the crap outta me as the device is on loan and I thought I bricked it.
Click to expand...
Click to collapse
OK, I did this and it actually worked. Previously I had let the phone sit at the LG logo for over 20 minutes with the entire phone getting hot from driving the display and it never did anything. So I plugged it in to main power and left it while I went to lunch and low and behold it was at the OOBE screen when I returned.
Who woulda thought that it would take that long and that it wouldn't give a status message or anything...
Either way, my thanks to you for the suggestion.
My pleasure, I remember how scared I was thinking I'd have to explain to MS how I bricked their device, using Windows Live of all things. I don't think anyone should have to go through that kind of a scare.
I wonder though, could the extreme wait-time be a way to discourage "finders" in a repeat of the iPhone 4 bar situation? Nuke the device and it won't boot for quite some time while connected to wall power ...
It still wipes quickly when using the reset option on the about screen.
i have a a100 with the latest flexreaper rom installed and im stuck with a pretty serious issue:
a couple of days ago the tab was acting real slow and sluggish and getting bad battery life didnt think nothing of it so i just rebooted a couple times and left it alone . all was good untill the battery hit 10% and i plugged it up using the factory ac adapter. the next day (maybe 6-7 hours later) i went to turn it on and nothing no vibrate no screen flash nothing; other than the power button turning blue as i pressed it and it would stay on for a couple hours but still no other response from the tablet.
im at my wits end on what could be wrong and now i got my wife with her foot on my neck till i get it fixed. can anyone help me?
ive tried to do a hard reset with the reset button tried to boot into recovery /bootloader no dice
(also my home button flashed a couple time i pressed the power button) dont know if its relevant but wanna get as much info out as possible
wondering if anyone can help me...
frenize said:
wondering if anyone can help me...
Click to expand...
Click to collapse
It may take awhile for someone to see this and form something to try, random bricking for no reason is rare, its almost always some error by the user. However have you attempted adb connection to it? Leave it powered off, connect to the PC you used to unlock the boot loader then power on. Does the PC make the USB connect sound? Does the Acer vibrate? Did the home key blink again?
It really sounds like your boot partition is wrecked which wouldn't normally happen outside of flashing. If boot loader is trash then it won't know what to do and just sit there. No recovery or anything else.
Tapatalked from my Galaxy S II.
pio_masaki said:
It may take awhile for someone to see this and form something to try, random bricking for no reason is rare, its almost always some error by the user. However have you attempted adb connection to it? Leave it powered off, connect to the PC you used to unlock the boot loader then power on. Does the PC make the USB connect sound? Does the Acer vibrate? Did the home key blink again?
It really sounds like your boot partition is wrecked which wouldn't normally happen outside of flashing. If boot loader is trash then it won't know what to do and just sit there. No recovery or anything else.
Tapatalked from my Galaxy S II.
Click to expand...
Click to collapse
it made something like the connect sound but instead of the regular duh doom sound it did a dadadoom (kinda hard to describe the sound) but it was faster than ive ever heard the connect sound before which is weird. the tab didnt vibrate and it seems the home button blinks when the tab is dead and needs recharged
frenize said:
it made something like the connect sound but instead of the regular duh doom sound it did a dadadoom (kinda hard to describe the sound) but it was faster than ive ever heard the connect sound before which is weird. the tab didnt vibrate and it seems the home button blinks when the tab is dead and needs recharged
Click to expand...
Click to collapse
Yeah I know that sound it means USB connected but error for some reason. Its been shown if this thing dies all the way down it wont read the battery correctly and probably needs to be sent in. Before that I personally would unplug it open it up and remove the battery for awhile, maybe an hour then put it back and plug it in. But thats me, not the advice I'm giving. If you have warantee on it use that.
The batteries on a lot of devices and laptops etc have something of a fail safe, if the voltage drops below a certain point it trips to prevent cell damage, however it renders the battery useless.
I haven't searched out much past that if a reset is possible by us, but it seems the pack is trash after or needs sent in.
Since this is a sealed unit you void warranty opening it (well unlocking the boot loader did too) so you can't send it in for repairs without paying for it.
I hope someone can jump in and help figure this out, and prove me wrong.
Tapatalked from my Galaxy S II.
Weird, This exact same thing happened to me. Used it in the morning and now after work it won't turn on. I had already tried disconnecting the battery, but hadn't thought to leave it disconnected for an hour. My tablet has been running the leaked ICS since it came out and The last factory reset it had was about a month ago. It was working fine up until this. The power button seems to be responding correctly, the issue is that after the LEDs light up, there is no vibration or display. I hope someone can help us with this issue.
EDIT:
It won't connect in ADB mode. It will only appear on my computer as an APX device and since there is no vibration I am unable to boot into fastboot. Any help or suggestions? All the threads I have found have involved booting into fastboot.
i am also having this problem. i set ti backup last night to save to box i turned it on this morning it.worked set it on the charger came back to a frozen screen. I turned it off now just a black screen it turns on or the home button dose but nothing comes up on the screen
same thing here.
max69power said:
i am also having this problem. i set ti backup last night to save to box i turned it on this morning it.worked set it on the charger came back to a frozen screen. I turned it off now just a black screen it turns on or the home button dose but nothing comes up on the screen
Click to expand...
Click to collapse
I have been using ICS the leaked one, and last night I was goint to check my email and it did not turn on, I though the battery died. I plugged to the charger and this morning I tried to turning it on but it failed. I did the reset pin but nothing. I connected to the computer and it was recognized as a APX device and installed a driver ACER Picasso USB recover but i cant access anything. I am a nob. Thanks
A100 blackscreen
i am also having this problem. last night. just a black screen it turns on or the home button dose but nothing comes up on the screen. :crying: Help!!!!!!
Has anyone tried holding the power button for a while? Laptops do this too, if someone felt ventures, try taking the battery out and hold the power button. No promises, might work.
sent from my ICONia
same here
Having the exactly same issue, here...
I also tried to hit the hardware reset button and it does not help.
If the screen is blank while powered on its in failsafe mode, in other words is bricked, has to go to Acer.
Tapatalked from my Galaxy S II.
This just happened to me a few weeks ago as well. If you are still under warranty send it in to Acer, thats what I did. I just got an email saying they had fixed it and were sending it back for free!!
At the time I was on the 9/02 JB build. I wonder if this issue is caused by faulty hardware or if it is an issue that was made by rooting and unlocking it? I don't know enough about this stuff to answer that though, but it does make me think whether I should root/unlock it when I get it back or leave it stock.
Also thanks Pio_masaki for helping me a few weeks back wasn't sure if I was even going to send it in until you said they most likely won't be able to tell.
I highly doubt they even CARE when sending these in. They will void for physical damage most likely.
tshm55 said:
Having the exactly same issue, here...
I also tried to hit the hardware reset button and it does not help.
Click to expand...
Click to collapse
Ohmygod,
Same here, but it's 3 years ago. Sorry for digging the topic. Still no hope? I still keep the tablet and have just buy another refurbished mainboard to replace but still no vibrate and blacksreen still there.
Hi!
First of all i got AOKP + Franco kernel for 2w without any problem and I didn't change any option since last week.
This morning i rebooted it, it switched off and it didn't start again.
I cannot switch one my nexus again since then. I have always a black screen, also if I try to enter in download mode or in the recovery.
I tried to connect to my computer and smt times my laptop see a omap4400 (i'm not sure about the name) but after few second it disappears.
Tomorrow I'm going to the service center... But I have a big doubt:
What the hell happened this morning?
Thanks
Remove the battery for 5 minutes and try again.
If that doesn't work,
Follow this guide:
1. Download the zip file from http://forum.gsmhosting.com/vbb/f634...eeeee-1465412/, created by Legija
2. Extract zip to whatever location you're comfortable with (I used Android directory)
3. Open up Device Manager (Hold down Windows Key, press R, the type in devmgmt.msc and press OK)
4. Go to actions menu, select Add Legacy Hardware
5. Choose install manually, then have disk. Browse to where you extracted the zip, select the 'inf' file in usb_drv_windows
6. Choose OMAP, you'll get a popup if on Win 7, continue anyway (driver not signed)
7. Once completed with driver, pull battery out of phone, then plug it into USB
8. Double click omap4460_tuna_hs_pro.bat to start the process
9. Once completed, unplug from USB, put battery back in, and power-up!
10. Extra step - depending on what's been done, it may 'brick' again - suggest to do a restore or a wipe reinstall afterwards to be certain (mine bricked again next reboot)
Click to expand...
Click to collapse
biscuitownz said:
Remove the battery for 5 minutes and try again.
If that doesn't work,
Follow this guide:
Click to expand...
Click to collapse
This, if OP can't reach fastboot.
Sent from my i9250
I'm having the exact same problem. I saw my phone at maybe 10% battery in the AM, said screw it and let it die, woke up this morning and plugged the phone in and nothing. No LED light, black screen, completely unresponsive. I've tried every trick in the book, and the only one that seemed to work marginally even was using a different battery, which got my phone to boot to the encryption screen, but then shut off again. It did that twice, and now both batteries are useless.
I used Legija's program to try and bring some life back to my gnex, even though it's not the international version, just in hopes of getting some of my data back (I have already started the replacement process with Verizon since the phone was insured), but I got no luck there either.
It's extremely disappointing and annoying to me that this phone survived all sorts of ROM installations (I was also using AOKP on 4.1 if someone wants to start making connections), reformatting, tweaking, almost every setting on that phone was modified by me.
Not only that but almost any software or hardware problem I did run into I could solve in maybe an hour, but I let my charge run out and the phone just up and bricks itself? Now, that's just bull****... I would be very curious as to an explanation as to WHY on earth this would happen. Very confusing.
Not to hijack the thread, but my interest here is not restoring the phone to working condition but just seeing if I can pull my data off of it. I wouldn't even be posting here had I been able to have an SD card with my gnex, which I figured was unnecessary at the time I bought it since I knew the space on their was enough for me already, and the added branding of "Nexus" brand which had me under the impression it was maybe stable enough by itself. Not a mistake I'll make again..
Is it at all possible to get the data off of my phone at this point? At least partially? I believe encryption makes it impossible but I'm rather stubborn. Any help would be greatly appreciated..
owlieowl said:
I'm having the exact same problem. I saw my phone at maybe 10% battery in the AM, said screw it and let it die, woke up this morning and plugged the phone in and nothing. No LED light, black screen, completely unresponsive. I've tried every trick in the book, and the only one that seemed to work marginally even was using a different battery, which got my phone to boot to the encryption screen, but then shut off again. It did that twice, and now both batteries are useless.
I used Legija's program to try and bring some life back to my gnex, even though it's not the international version, just in hopes of getting some of my data back (I have already started the replacement process with Verizon since the phone was insured), but I got no luck there either.
It's extremely disappointing and annoying to me that this phone survived all sorts of ROM installations (I was also using AOKP on 4.1 if someone wants to start making connections), reformatting, tweaking, almost every setting on that phone was modified by me.
Not only that but almost any software or hardware problem I did run into I could solve in maybe an hour, but I let my charge run out and the phone just up and bricks itself? Now, that's just bull****...
Not to hijack the thread, but my interest here is not restoring the phone to working condition but just seeing if I can pull my data off of it. I wouldn't even be posting here had I been able to have an SD card with my gnex, which I figured was unnecessary at the time I bought it since I knew the space on their was enough for me already, and the added branding of "Nexus" brand which had me under the impression it was maybe stable enough by itself. Not a mistake I'll make again..
Is it at all possible to get the data off of my phone at this point? At least partially? I believe encryption makes it impossible but I'm rather stubborn. Any help would be greatly appreciated..
Click to expand...
Click to collapse
So just to be clear... You've been able to get it to boot all the way up to the encryption screen, right? If so you should be able to get into fastboot (Holding down BOTH volume rockers and the power key.) From there you could relock/unlock the bootloader to do a full factory wipe which might solve your boot issue.
As far as the data loss from the wipe, you could then try this: http://forum.xda-developers.com/showthread.php?t=1994705
TomBall718 said:
So just to be clear... You've been able to get it to boot all the way up to the encryption screen, right? If so you should be able to get into fastboot (Holding down BOTH volume rockers and the power key.) From there you could relock/unlock the bootloader to do a full factory wipe which might solve your boot issue.
As far as the data loss from the wipe, you could then try this: http://forum.xda-developers.com/showthread.php?t=1994705
Click to expand...
Click to collapse
I was able to get it to the encryption screen with my old battery that had a little bit of charge left in it twice, but it shut itself down on me both times. So now both batteries are useless.. I took it to the Verizon store hoping they would maybe try one of their batteries, but they just called customer service and told me they're just going to replace it at this point.
I have a feeling the charging mechanism is somehow damaged, because when I did get it to the encryption screen I had it plugged into a wall outlet and it wasn't charging at all. So, I can't turn the phone on whatsoever anymore.. if I could turn it on I could solve this problem... but it simply refuses to boot. The closest I came to interfacing with it was the OMAP Flash script, which did work, but didn't fix the problem.
So maybe if I could get the phone working enough to use ADB with it I could get my data back, but not even that seems possible..
owlieowl said:
I was able to get it to the encryption screen with my old battery that had a little bit of charge left in it twice, but it shut itself down on me both times. So now both batteries are useless.. I took it to the Verizon store hoping they would maybe try one of their batteries, but they just called customer service and told me they're just going to replace it at this point.
I have a feeling the charging mechanism is somehow damaged, because when I did get it to the encryption screen I had it plugged into a wall outlet and it wasn't charging at all. So, I can't turn the phone on whatsoever anymore.. if I could turn it on I could solve this problem... but it simply refuses to boot. The closest I came to interfacing with it was the OMAP Flash script, which did work, but didn't fix the problem.
So maybe if I could get the phone working enough to use ADB with it I could get my data back, but not even that seems possible..
Click to expand...
Click to collapse
If the phone isn't charging then there's something wrong with the USB port. One way to test that would be to use a battery charger. Also, try a different cable. I've had issues with a few different cables that for whatever reason started to not fit properly in the phone.
If you're USB port has gone bad then you'll need to either A) Always use an external battery charger. B) Get a replacement. C) Fix it yourself (Good guide here: http://www.ifixit.com/Guide/Repairi...+LTE)+Micro+USB+Charge+Port+&+Main+Mic/9641/1 )
Hi there, this is my first post, i didnt want it to be like this but i have come to you in desperation.
I was excited about 4 hours ago to realise my phone was getting an update saying it was going to imporve battery life etc..
Well i let it do its thing while it was downloading, i went to check after an hour or so and it said the software had been corrupted or something along those lines, either way it had to start the download again.
It was about bed time when this happened so i chucked it on the charger, fell asleep, woke up and it was doing something on a kind of screen i had never seen before, black screen, obviously showing that it is processing the update(i was a little tired from waking up) i think i remember taking its time maybe longer than it should have been.
I went back to sleep woke up about an hour ago from now and checked my phone and the screen would not turn on, i think the charger cable had fallen out from the phone because it is loose and does that some times.
So i placed the cord back in and it didnt seem to respond with the red led coming up for a while then all of a sudden it worked for some reason, but was flashing. i suspected this was because the battery had been sucked dry. So after a while the led stopped flashing and i pressed the power button, sure enough it powers up straight away to the HTC - quietly brilliant screen. And thats that, end of story. It's stuck on that screen WTF?
I have been through forums like these interested in changing ROMs and so on but it all seems so complicated i never even bothered, so obviously i am a noob, but i dont think there is any reason for this to happen other than sh*t luck.
Can anyone help us out?
Your better off sending for repair unless you want to start unlocking the bootloader etc.
Reboot your phone in bootloader ( press PowerButton + Volume down at the same time) you will get to a screen with various lines, look factory reset, navigate that menu with your volume keys. Hit factory reset you should get . See if it fixes it.
masucu said:
Reboot your phone in bootloader ( press PowerButton + Volume down at the same time) you will get to a screen with various lines, look factory reset, navigate that menu with your volume keys. Hit factory reset you should get . See if it fixes it.
Click to expand...
Click to collapse
mercccccccccccccccccccccccccccccccci
zezo_ddd said:
mercccccccccccccccccccccccccccccccci
Click to expand...
Click to collapse
Well did it work? before you say that long thanks
Thanks for your help, unfortunately, the factory reset didnt work.
What happened when i first did it, the update screen came up like the first time but still ended up freezing on the quietly brilliant screen.
I'd be willing to unlock the bootloader, i really dont want to send the phone away for a third time. Why didnt i get the Galaxy S3!?!?!
I hate to ask, can u point me to the right thread to do that, there seems to be a few but they seem to have different purposes.
Thanks again.
helter_skelter87 said:
Thanks for your help, unfortunately, the factory reset didnt work.
What happened when i first did it, the update screen came up like the first time but still ended up freezing on the quietly brilliant screen.
I'd be willing to unlock the bootloader, i really dont want to send the phone away for a third time. Why didnt i get the Galaxy S3!?!?!
I hate to ask, can u point me to the right thread to do that, there seems to be a few but they seem to have different purposes.
Thanks again.
Click to expand...
Click to collapse
If you wait a day or so, the RUU will be released for your region now that the OTA has been released.
You'll be able to fully reload your phone - this is all HTC do when you send it for repairs and you can do it in a lot less time.
At the moment, HTC may even reload the 2.17 software so you may still have the problem again when trying to load the OTA.
Thanks all for your interest.
I spoke with customer support and they told me exactly what i already had done, factory reset through hboot.
After that was a no go, he told me i have to send it back to the point of sale, so they can flash the software?
Where can i find this ruu once it has been released?
I'm pretty sure the updates all say to not have the phone plugged in when updating.
Sent from my HTC One X using xda app-developers app
Hi everybody!
I have an almost 2 years old DHD which I think is completely bricked. It was working for approximately one years perfectly and then suddenly it stopped working. Whenever I tried to turn it on, it only vibrated once and did nothing more. Sometimes it turned on and these working periods were enough to restore to stock condition (It was rooted and had Eng S-OFF before.). I had brought it to service and they said they was not going to repair it as the device got water damaged. I'm pretty sure it was not! After a few weeks, it started working again. I was using it for 3 months then it bricked again and it's the situation today as well.
Previous week I looked into the development thread and saw all of these new amazing roms. So I took my DHD to see if it's working or not. The situation is the same. Everytime I power it on, the phone only vibrates once and nothing happens. I'm not able to get into hboot mode. At some very rare occassions the phone turns on and works flawlessly till reboot. When I connect it with USB, the computer doesn't recognize it. Battery is charged, I even tried another battery.
Does anybody know what happens with the phone? I'm open to any possible solutions to try. Please don't suggest to bring it to service or repair it, because I have another phone, just want to try to recover it and ask your ideas about the problem.
Thanks in advance!
Greetings,
Adam
So you say you cant enter in fastboot or recovery?
Since it's intermittent, my guess is it is a hardware problem. Some kind of bad contact/loose connection. Make sure everything looks good on your battery door and the battery contacts inside the phone.
paescheh said:
So you say you cant enter in fastboot or recovery?
Click to expand...
Click to collapse
I cannot enter into hboot mode. Didn't try recovery, but assume it's the same.
waterbox said:
Since it's intermittent, my guess is it is a hardware problem. Some kind of bad contact/loose connection. Make sure everything looks good on your battery door and the battery contacts inside the phone.
Click to expand...
Click to collapse
I also think it's a hardware problem. Will take a more careful look at the battery.
Sent from my CM10-powered GT-I9103
need help
im having trouble finding post option on page.i recently rooted my phone.all was well until i used font app sms pro and emoji plug in.i also forgot o disable auo update.worked for 10 minutes then apps wouldnt load.whil attempting to uninstall via recovery...since no other options worked...i wiped my system....now recovery says E:no os...please help...im using vm htc 1 v cdma...
goofed again said:
im having trouble finding post option on page.i recently rooted my phone.all was well until i used font app sms pro and emoji plug in.i also forgot o disable auo update.worked for 10 minutes then apps wouldnt load.whil attempting to uninstall via recovery...since no other options worked...i wiped my system....now recovery says E:no os...please help...im using vm htc 1 v cdma...
Click to expand...
Click to collapse
Wrong sub forum buddy, post in the One V Forum.
Its possible that there isn't "water damage", but there could be moisture getting into the phone causing it to act erratic. To cancel out that possibility, submerge it in a closed container full of rice for a few days
Sent from a satellite