Related
Hi,
I have been rooting for a while with my evo 4g which is basically just recoveries & zip files.
Currently I have updated to Calk's ICS Beta 3 rom with modem FC05. I have read some stuff here & there that talk about having issues going from a ICS rom back to a GB nandroid.
I have installed Kies opened Odin, looked at the Wiki here:
http://forum.xda-developers.com/showthread.php?t=1274337
I just dont quite get in terms of flashing zips through odin. I keep reading people say to odin back to stock & then flash from there.
How do I do that? I looked at QB777's video on youtube, but it seems like PIT files arent used much at this point.
Any advice would be great.
Thanks,
Rich
Ok, basically when you Odin back to stock, it involves flashing a .tar ROM from the pda slot in desktop Odin and not zip file like you would in CWM. Once you restore back to stock, you can find a .tar recovery, I personally use rogue which will allow you to have cwm-based recovery for flashing zips. All the links should be in development. Let me know if you still need help
Edit-what Odin does is it allows you to flash Roms, kernels, moderns, etc even if you don't have a custom recovery, provided that they are in the correct format, like .tar extension
Sent from my SPH-D710 using xda premium
so when i flash a tar, I go into download mode, open odin, point it to a stock rooted tar file that has CWR & I am back to stock ready to flash to something else?
Can you help me find those files? A stock rooted, CWR should do the trick.
RichTJ99 said:
so when i flash a tar, I go into download mode, open odin, point it to a stock rooted tar file that has CWR & I am back to stock ready to flash to something else?
Can you help me find those files? A stock rooted, CWR should do the trick.
Click to expand...
Click to collapse
Ok, so you go into a download mode on your phone, open Odin, plug in your USB cord, ODIN should recognize your phone provided you installed the right drivers. You're good if you get the yellow box that says 0 com, something something. The only box that should be checked is Auto Reboot in Odin.
The easiest way that I've been going back and forth between GB and ICS is to install the rooted EL29 .tar version here
http://little-melon.com/sfhub/SPH-D710.EL29_CL852097_ROOTED-sfx.exe
You would need to extract the file until you get a folder with tar.md5 name. Example of the file I provided would be SPH-D710.EL29_CL852097_ROOTED_PDA.tar.md5 once you unzip it. This is the file you would put on the PDA slot of your desktop Odin.
Once you do this, Odin will start flashing and be done in like 1-2 minutes and auto reboot. Do not do anything to shut down, unplug, or mess with the device while Odin is flashing or you may end up bricking it. Once your phone reboots you will be rooted and stock based with EL 29 modem and kernel, which is the latest official Sprint OTA. If you want to get a recovery after this,you would need to go back into Odin and flash a kernel that has a recovery baked in. Like I said I use Rogue and the link would be here for Rogue Stock EL29-
http://goo-inside.me/kernels/TeamRo.../rogue_ET-recoveryonly-1.1.4-rc0-odin.tar.md5
Flashing this in Odin you will get CWM-based recovery and can start backing up, flashing different ROMS.
Hope this helps.
This is very helpful. I am stuck at the SGS2 boot screen after flashing MIJJs Goodness 1.8, can't boot in to recovery, only download mode. How do I fix this?
thefoss said:
This is very helpful. I am stuck at the SGS2 boot screen after flashing MIJJs Goodness 1.8, can't boot in to recovery, only download mode. How do I fix this?
Click to expand...
Click to collapse
Flash a recovery in download mode that I linked. It's rogue recovery
Sent from my SPH-D710 using xda premium
Just to confirm, using the files you had here, I open odin in download mode, choose PDA (check the check box) point it to the tar.md5 file, hit start & wait a few minutes until it auto reboots?
How do I flash the recovery? Is it also the PDA?
I have been flashing modems in CWR, not odin & I just want to make sure that recovery or rom itself, just PDA & nothing else checked (but PDA)?
stargaterules said:
Ok, so you go into a download mode on your phone, open Odin, plug in your USB cord, ODIN should recognize your phone provided you installed the right drivers. You're good if you get the yellow box that says 0 com, something something. The only box that should be checked is Auto Reboot in Odin.
The easiest way that I've been going back and forth between GB and ICS is to install the rooted EL29 .tar version here
http://little-melon.com/sfhub/SPH-D710.EL29_CL852097_ROOTED-sfx.exe
You would need to extract the file until you get a folder with tar.md5 name. Example of the file I provided would be SPH-D710.EL29_CL852097_ROOTED_PDA.tar.md5 once you unzip it. This is the file you would put on the PDA slot of your desktop Odin.
Once you do this, Odin will start flashing and be done in like 1-2 minutes and auto reboot. Do not do anything to shut down, unplug, or mess with the device while Odin is flashing or you may end up bricking it. Once your phone reboots you will be rooted and stock based with EL 29 modem and kernel, which is the latest official Sprint OTA. If you want to get a recovery after this,you would need to go back into Odin and flash a kernel that has a recovery baked in. Like I said I use Rogue and the link would be here for Rogue Stock EL29-
http://goo-inside.me/kernels/TeamRo.../rogue_ET-recoveryonly-1.1.4-rc0-odin.tar.md5
Flashing this in Odin you will get CWM-based recovery and can start backing up, flashing different ROMS.
Hope this helps.
Click to expand...
Click to collapse
Reverting back to GB ROM
I recently switched back from ICS to GB and did not have any problems with the change back. I simply went into my SD card manually took everything off except my chaulkins format all and my wifi tether hack. I then went into recovery mode and did a wipe all. Then went to zip files, ran the format all, then did an install of the new ROM and it works great!
I have the galaxy m919, and had a bad flash yesterday. My phone is now softbricked, and I am unsuccessful in fixing it.
I have run ODIN with a PDA file and it did not fix the problem. I am pretty sure I also need a PIT file to load. I thought I had one saved from when I originally got my phone and decided to root it and put the Infamous rom on it, but can't find it for the hell of me.
All attempts to search for the files online just gives me .tar files.
Any suggestions?
If I was soft bricked I would flash the stock img. When you say bad flash I assume the process was interrupted. Go here http://forum.xda-developers.com/showthread.php?t=2336392 and download the stock ROM open Odin and select PDA and find the stock MDL tar file and select it, then put your phone in download mode by pushing (volume down+home and power) then plug it in you your PC. Make sure the com window lights up and click start. Let the phone reboot and then re-root or do what you wish. I hope this helps. Good luck
Sent from my SGH-M919 using xda app-developers app
Thank you! I wiped it in recovery, and it fires up just fine now on the stock rom I installed.
:crying:
I was updating my phone with official 4.3 then the odin hanged and stopped working and the phone now when I power it on it gives my this message
"Firmware update encountered an issue , please select recovery mode in Kies and try again"
- Kies doesn't recognize the mobile
- I wasn't rooted
- I have no warranty
PS : I tried and I can boot into download mode
but when I try to flash stock firmware the odin hangs again
I searched and found that I can unbrick it using stock rom with pit file and modem file as separate files .. any one with this rom ??
please tell me what to do ..
http://forum.xda-developers.com/galaxy-s2/help/guide-fix-unflashable-soft-bricked-gsii-t1457458
hassan_eldhraawy said:
:crying:
I was updating my phone with official 4.3 then the odin hanged and stopped working and the phone now when I power it on it gives my this message
"Firmware update encountered an issue , please select recovery mode in Kies and try again"
- Kies doesn't recognize the mobile
- I cann't boot into download mode nor recovery mode
- I wasn't rooted
- I have no warranty
please tell me what to do ..
Click to expand...
Click to collapse
long press on "power button" till your phone reboot
monteiro-ribas said:
http://forum.xda-developers.com/galaxy-s2/help/guide-fix-unflashable-soft-bricked-gsii-t1457458
Click to expand...
Click to collapse
I can't go to download mode so I can't use odin
dabenaute said:
long press on "power button" till your phone reboot
Click to expand...
Click to collapse
pressing the power button reboots and gives the same message
PS : I tried and I can boot into download mode
but when I try to flash stock firmware the odin hangs again
I searched and found that I can unbrick it using stock rom with pit file and modem file as separate files .. any one with this rom ??
which odin are you using?Before flashing uncheck"Re-Partition",check"Auto-Reboot" and"F-Reset Time"
EDIT
Which rom are you trying to flash?
dabenaute said:
which odin are you using?Before flashing uncheck"Re-Partition",check"Auto-Reboot" and"F-Reset Time"
EDIT
Which rom are you trying to flash?
Click to expand...
Click to collapse
Now I'm downloading 4.3 ROM with 4 files "pda, modem, phone, PDA" going to flash it
the odim version odin3 3.09
the rom name n7100xxuemk9_n7100xxuemk4_OXX
hassan_eldhraawy said:
I can't go to download mode so I can't use odin
Click to expand...
Click to collapse
Press and hold Vol down + Menu key and power key for 4~8 secs it'd again reboot your phone into download mode, and repeat the full story again.
Put battery out and put back again and you will go at download mode (also I think when you have this message you are at download mode check if you don't see again the download mode if you can see the phone through odin) . Open the task manager at windows and terminate any kies process, download Odin3v1.87 close the Internet connection and flash your firmware with pit file and repartition checked. Odin3v1.87 will do the job, newer odin can't flash at this situation.
Sent from my GT-N7100 using Tapatalk 2
hassan_eldhraawy said:
Now I'm downloading 4.3 ROM with 4 files "pda, modem, phone, PDA" going to flash it
the odim version odin3 3.09
the rom name n7100xxuemk9_n7100xxuemk4_OXX
Click to expand...
Click to collapse
Hello,dont forget to CLOSE KIES before open ODIN,it si better to have mj5 bootloader /http://www.mediafire.com/download/b59xde333z6q8pv/BL_N7100XXUEMJ5_1903221_REV04_user_low_ship.tar.md5
after several tries I come to and end
the emmc partition is bad
I tried to flash pit file alone , pit file with 4 files factory rom , pit file with 1 file rom , roms without pit file , NO result
the odin gives an error "No pit partition"
I think I should replace the ship
hey everyone
i have a bricked GT-I5510M and i really dont know what to do with it
when i try to power on the phone, nothing happen, only a black screen. the exact same thing happen if i try to go to recovery.
but i can access download mode and emergency download mode.
i tried to flash a stock rom using odin in download mode, everything worked except when the phone rebooted, again, a black screen.
what should i do ? i'm pretty sure i tried everything..
skfunnyboy said:
hey everyone
i have a bricked GT-I5510M and i really dont know what to do with it
when i try to power on the phone, nothing happen, only a black screen. the exact same thing happen if i try to go to recovery.
but i can access download mode and emergency download mode.
i tried to flash a stock rom using odin in download mode, everything worked except when the phone rebooted, again, a black screen.
what should i do ? i'm pretty sure i tried everything..
Click to expand...
Click to collapse
Are you sure you're using correct versions of Odin+firmware?
Did you uninstall KIES before flashing?
LS.xD said:
Are you sure you're using correct versions of Odin+firmware?
Did you uninstall KIES before flashing?
Click to expand...
Click to collapse
yeah i'm pretty sure i'm using the correct version
(the name of the tar is I5510UGKC5_BMCKC5_HOMEDOWNLOAD_TEST.tar and the version of odin is 4.34, and i'm using the CALLISTO ops)
and no kies is still installed but i did flashed another samsung phone using odin and it worked, but ill try without kies installed, we never know :fingers-crossed:
Double-check that you have a working firmware image. I used the stock firmware package with this MD5 to restore a bad Cyanogenmod flash on a GT-I5510M phone:
Code:
a8ab8ec4154548b6a9873e6c04937c96 *BMC-I5510UGKC5-20110331113635.zip
38375ba92ffe3819bc25f7e28dd28812 *I5510UGKC5_BMCKC5_HOMEDOWNLOAD_TEST.tar
The ZIP file contains the TAR file. Flash the TAR file to the GT-I15510M phone through Odin in "One Package" mode with the OPS file for this phone.
I haven't been able to find a custom recovery package that is actually compatible with this Samsung Galaxy 511 submodel. Most of the forum posts regarding the GT-I15510 family are inaccurate or sloppy.
try flashing stock ROM
dajhorn said:
Double-check that you have a working firmware image. I used the stock firmware package with this MD5 to restore a bad Cyanogenmod flash on a GT-I5510M phone:
Code:
a8ab8ec4154548b6a9873e6c04937c96 *BMC-I5510UGKC5-20110331113635.zip
38375ba92ffe3819bc25f7e28dd28812 *I5510UGKC5_BMCKC5_HOMEDOWNLOAD_TEST.tar
The ZIP file contains the TAR file. Flash the TAR file to the GT-I15510M phone through Odin in "One Package" mode with the OPS file for this phone.
I haven't been able to find a custom recovery package that is actually compatible with this Samsung Galaxy 511 submodel. Most of the forum posts regarding the GT-I15510 family are inaccurate or sloppy.
Click to expand...
Click to collapse
i have the correct firmware image, the md5 is the same.
try this install stock firmware. If its not turning on. Install cwm recovery via odin and try to get into the recovery and install a rom(I installed kitkat experience rom by burnmode). Its working now alhamdulillah.
Sent from my GT-I5510 using XDA Free mobile app
So I flashed cm 10.2 on my Galaxy S3 AT&T, and forgot to flash the right gapps, so I did that, except I forgot to do a factory reset when I flashed them. When I went to reboot, my phone would not turn on, nor get into recovery mode. It keeps showing the Samsung logo with the little CyanogenMod figure underneath it, and keeps vibrating repeatedly while trying to turn on. This is not a boot loop (I think) because my phone doesnt even get as far as the arrow animation that keeps going in circles. All I can do is access download mode. Can anyone help me? I have tried taking the battery out multple times and waiting for the battery to charge and then trying to turn it on, to no success.
rohanr014 said:
So I flashed cm 10.2 on my Galaxy S3 AT&T, and forgot to flash the right gapps, so I did that, except I forgot to do a factory reset when I flashed them. When I went to reboot, my phone would not turn on, nor get into recovery mode. It keeps showing the Samsung logo with the little CyanogenMod figure underneath it, and keeps vibrating repeatedly while trying to turn on. This is not a boot loop (I think) because my phone doesnt even get as far as the arrow animation that keeps going in circles. All I can do is access download mode. Can anyone help me? I have tried taking the battery out multple times and waiting for the battery to charge and then trying to turn it on, to no success.
Click to expand...
Click to collapse
If you can get to download mode, try flashing a stock file via Odin to reset your phone to working conditions. Thereafter, you can go back to a custom ROM. Would you recall what firmware version you were on prior to flashing CM? If it was anything older than 4.3 (e.g. 4.1.2, 4.1.1), you can Odin back to 4.1.1. If you already had 4.3, you would need to Odin back to 4.3 following the instructions posted in the thread below ..
http://forum.xda-developers.com/showthread.php?t=2722660&page=3. Scroll through carefully for the file you need for 4.3. Otherwise, you can find the Odin flash-able 4.1.1 stock file on sammobile.com
Larry2999 said:
If you can get to download mode, try flashing a stock file via Odin to reset your phone to working conditions. Thereafter, you can go back to a custom ROM. Would you recall what firmware version you were on prior to flashing CM? If it was anything older than 4.3 (e.g. 4.1.2, 4.1.1), you can Odin back to 4.1.1. If you already had 4.3, you would need to Odin back to 4.3 following the instructions posted in the thread below ..
http://forum.xda-developers.com/showthread.php?t=2722660&page=3. Scroll through carefully for the file you need for 4.3. Otherwise, you can find the Odin flash-able 4.1.1 stock file on sammobile.com
Click to expand...
Click to collapse
I have looked at the thread but I am new to all this stuff, how do I flash using Odin?
rohanr014 said:
I have looked at the thread but I am new to all this stuff, how do I flash using Odin?
Click to expand...
Click to collapse
First you will need to download and extract the Odin tool. Odin is Samsung's tool for flashing (installing) firmware. You can download Odin v3.07 via the link below ...
http://www.mediafire.com/download/772dlmuaxfgm0x2/Odin307.zip
Once you have downloaded it, extract the files and look for the executable file (*.exe). That's the one you will need to run to open Odin.
We also need to identify the appropriate firmware to flash. You did not answer the earlier question on what Android version your device was on prior to flashing the custom firmware. This is important to let us know which official version you can safely revert to (4.1.1 or 4.3). If you were an older version than 4.3, you should flash 4.1.1 but if you were already on 4.3, then you should stick to this. Either way, you can download the 4.1.1 file via this link .. http://rapidgator.net/file/681a28a5...ATT_I747UCDLK3_I747ATTDLK3_Original.zip.html?
Download the files to your PC and extract.
To flash via Odin, open Odin.exe on your PC
Click on the PDA tab and navigate to the file you just extracted. Select the file ending in *.tar.md5 (For 4.1.1, this would be I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5). Make sure this file is showing in the PDA tab.
Boot your phone into download mode and connect to your computer with a good quality micro-USB cable. Make sure your phone is recognized by Odin. You should see the message Added in the left pane.
Do not check or uncheck any boxes other than the defaults.
Click on start and waiting for firmware flashing to end and you see Pass. Your phone will reboot at this stage. You can disconnect from your PC
However, for 4.3, it looks like the Odin flash-able file has been taken offline so you would need to this via custom recovery. That's a different process so please revert on your Android version first so we'll know whether this is required or not
I was running JB 4.3, and I am planning to flash 4.1.1 as you've said. I am downloading that rom from the SamMobile site, however it is taking quite a while...
I understand that it shouldnt be a two minute download, however its been 2 hours and only 210 MB has been downloaded.
Also, I have Odin v3.09, which in the place of a PDA tab, there is an AP tab... should I place the file in the AP tab?
rohanr014 said:
I was running JB 4.3, and I am planning to flash 4.1.1 as you've said. I am downloading that rom from the SamMobile site, however it is taking quite a while...
I understand that it shouldnt be a two minute download, however its been 2 hours and only 210 MB has been downloaded.
Also, I have Odin v3.09, which in the place of a PDA tab, there is an AP tab... should I place the file in the AP tab?
Click to expand...
Click to collapse
Please do not try to flash 4.1.1 if you were on JB 4.3 otherwise you could hard brick your phone due to the secure bootloader in 4.3. You need to revert to stock 4.3 via custom recovery. You may go to the thread below for instructions...
http://forum.xda-developers.com/showthread.php?t=2658486
1) Flash custom recovery (I would suggest TWRP because of the GUI). In Odin v3.09 use the AP tab in place of PDA. You can download TWRP for your device via the link below ...
http://techerrata.com/file/twrp2/d2att/openrecovery-twrp-2.6.3.1-d2att.tar
2) Download the stock restore zip file in the thread above and copy to your (micro) SD card. The (TWRP) stock restore zip is also available via the following link .... http://www.mediafire.com/download/30idxwhg2hidxx2/ATT_I747_UCUEMJB_StockRestore_2282014.zip
3) Flash the custom recovery file via Odin. Remove battery immediately the flashing is complete to stop reboot.
4) Place the SD card with the recovery file in your phone
5) Reboot into recovery mode by simultaneously holding down the Volume Up, Home and Power buttons. Hold all buttons until you see the blue flash across your screen, then release power button but keep holding the volume up and home buttons until the Android image appears.
6) Select install and navigate to the stock restore file. Swipe across screen to flash and wait for installation to be complete.
7) Clear cache/dalvik and reboot to system
If you are unable to boot to recovery, then you may still try flashing using Odin v3.09. You may follow the instructions in the thread below and load all the respective partitions. You would need to use the version that has separate flashable files as the single *.tar file has been taken down.
Larry2999 said:
Please do not try to flash 4.1.1 if you were on JB 4.3 otherwise you could hard brick your phone due to the secure bootloader in 4.3. You need to revert to stock 4.3 via custom recovery. You may go to the thread below for instructions...
http://forum.xda-developers.com/showthread.php?t=2658486
1) Flash custom recovery (I would suggest TWRP because of the GUI). In Odin v3.09 use the AP tab in place of PDA. You can download TWRP for your device via the link below ...
http://techerrata.com/file/twrp2/d2att/openrecovery-twrp-2.6.3.1-d2att.tar
2) Download the stock restore zip file in the thread above and copy to your (micro) SD card. The (TWRP) stock restore zip is also available via the following link .... http://www.mediafire.com/download/30idxwhg2hidxx2/ATT_I747_UCUEMJB_StockRestore_2282014.zip
3) Flash the custom recovery file via Odin. Remove battery immediately the flashing is complete to stop reboot.
4) Place the SD card with the recovery file in your phone
5) Reboot into recovery mode by simultaneously holding down the Volume Up, Home and Power buttons. Hold all buttons until you see the blue flash across your screen, then release power button but keep holding the volume up and home buttons until the Android image appears.
6) Select install and navigate to the stock restore file. Swipe across screen to flash and wait for installation to be complete.
7) Clear cache/dalvik and reboot to system
If you are unable to boot to recovery, then you may still try flashing using Odin v3.09. You may follow the instructions in the thread below and load all the respective partitions. You would need to use the version that has separate flashable files as the single *.tar file has been taken down.
Click to expand...
Click to collapse
Just to reaffirm since I am not very experienced and do not wish to break my phone:
1) Download the twrp 2.6.3.1 d2att.tar file and flash it to my phone in download mode via Odin.
2)Download zip file on my computer, and take out the microSD from my phone, and copy the file to my microSD.
3) I am confused here because you stated to flash the custom recovery in step 1... anyways when flash is complete I immediately take my battery out to stop the reboot.
4) I insert the microSD with the zip file containing the stock rom
5) Now I should be able to reboot into recovery mode on my phone, though I could not beforehand.
6) Once in Recovery, go to Install and flash the custom stock.
7)Wipe dalvik cache and cache, and reboot to system.
Please clear up any confusion, I am very cautious and inexperienced. Sorry.
rohanr014 said:
Just to reaffirm since I am not very experienced and do not wish to break my phone:
1) Download the twrp 2.6.3.1 d2att.tar file and flash it to my phone in download mode via Odin.
2)Download zip file on my computer, and take out the microSD from my phone, and copy the file to my microSD.
3) I am confused here because you stated to flash the custom recovery in step 1... anyways when flash is complete I immediately take my battery out to stop the reboot.
4) I insert the microSD with the zip file containing the stock rom
5) Now I should be able to reboot into recovery mode on my phone, though I could not beforehand.
6) Once in Recovery, go to Install and flash the custom stock.
7)Wipe dalvik cache and cache, and reboot to system.
Please clear up any confusion, I am very cautious and inexperienced. Sorry.
Click to expand...
Click to collapse
Yes, you are correct. What you are doing in step 1) is flashing custom recovery to your phone. Custom recovery allows you install zip files to your phone and is more functional and versatile than stock recovery.
The zip file referred to in 2) is the stock restore zip. This is the file you will be flashing from (custom) recovery and is the one from the following link (http://www.mediafire.com/download/30...re_2282014.zip). Once you have downloaded it to your computer, save to an SD card so you can insert it into your phone to flash.
The battery pull is after flashing the TWRP file. You then have to boot into (custom) recovery mode to flash the stock restore zip from the SD card.
You are OK on the other steps. Trust this clarifies. Let me know if you encounter any issues.
I have done everything you said, I flashed the TWRP file via Odin, and then i copied the stock zip file to my microSD and put it back into my phone.
I am able to boot into recovery, and everytime I go to flash the stock rom, midway through the flash my phone starts rebooting. Even if I try to clear dalvik cache and cache first, once they are cleared my phone automatically starts rebooting. What do I do now? The zip file is there and I can reach TWRP recovery, but the flash wont complete because my phone starts rebooting. I am at a 100% battery right now so I do not know what the cause of this could be. Please help, I cannot tell what I did wrong if I did do anything wrong.
Try installing the latest version of Philz Touch for the d2lte. Some people have good results with TWRP. I found Philz Touch, which is based on CWM, better for my purposes. Philz can be installed via Odin as long as you down the tar version.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte
Larry2999 said:
Yes, you are correct. What you are doing in step 1) is flashing custom recovery to your phone. Custom recovery allows you install zip files to your phone and is more functional and versatile than stock recovery.
The zip file referred to in 2) is the stock restore zip. This is the file you will be flashing from (custom) recovery and is the one from the following link (http://www.mediafire.com/download/30...re_2282014.zip). Once you have downloaded it to your computer, save to an SD card so you can insert it into your phone to flash.
The battery pull is after flashing the TWRP file. You then have to boot into (custom) recovery mode to flash the stock restore zip from the SD card.
You are OK on the other steps. Trust this clarifies. Let me know if you encounter any issues.
Click to expand...
Click to collapse
Ok, something very strange has occured.
Since my phone would not flash the original stock rom, I decided to go ahead and flash CM10.2 and its gapps to see if it the problem was with my phone or with the file. Everything worked fine and my phone booted and ran CM10.2, but then I had absolutely no signal anywhere. I could confirm something was wrong because there were multiple AT&T users near me that had good signal. So then I went to flash the stock rom, and it worked. I cleared dalvik and cache like normal after all these flashes and performed factory resets, however when I flashed this stock rom, it worked but 1) I could not connect to Wifi 2) I could not use apps with root requirements, and Root Checker said I did not have root access, even though I had definitely rooted my phone earlier when I first ran CM11 and CM10.2
Should I root again? Please help, my phone is working and I can go into download, stock recovery, and normal mode.
audit13 said:
Try installing the latest version of Philz Touch for the d2lte. Some people have good results with TWRP. I found Philz Touch, which is based on CWM, better for my purposes. Philz can be installed via Odin as long as you down the tar version.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte
Click to expand...
Click to collapse
The whole idea was to get your phone back to working state. Thereafter, you can build up on the food chain. The stock file you flashed restores the phone to near factory settings including a complete stock (official) firmware, stock recovery, resetting the flash counter. Unfortunately, it also removes root as well. You can, however, re-root in a number of ways. You may also do as Audit advised and reflash Philz Touch custom recovery which would allow you flash any custom ROM of your choice. You do not necessarily need to root to flash custom ROMs if you have custom recovery. However, if you need to use apps which require root, I would recommend you try SafeRoot (http://forum.xda-developers.com/showthread.php?t=2565758). Very easy to use and worked quite well for me.
Finally, you should be able to restore your Wi-Fi from settings. Wi-Fi setup should have happened during the set-up process upon reboot after the firmware installation but sometimes this step is skipped. If you go to Settings, you should be able to enable and set up Wi-Fi.