So I flashed cm 10.2 on my Galaxy S3 AT&T, and forgot to flash the right gapps, so I did that, except I forgot to do a factory reset when I flashed them. When I went to reboot, my phone would not turn on, nor get into recovery mode. It keeps showing the Samsung logo with the little CyanogenMod figure underneath it, and keeps vibrating repeatedly while trying to turn on. This is not a boot loop (I think) because my phone doesnt even get as far as the arrow animation that keeps going in circles. All I can do is access download mode. Can anyone help me? I have tried taking the battery out multple times and waiting for the battery to charge and then trying to turn it on, to no success.
rohanr014 said:
So I flashed cm 10.2 on my Galaxy S3 AT&T, and forgot to flash the right gapps, so I did that, except I forgot to do a factory reset when I flashed them. When I went to reboot, my phone would not turn on, nor get into recovery mode. It keeps showing the Samsung logo with the little CyanogenMod figure underneath it, and keeps vibrating repeatedly while trying to turn on. This is not a boot loop (I think) because my phone doesnt even get as far as the arrow animation that keeps going in circles. All I can do is access download mode. Can anyone help me? I have tried taking the battery out multple times and waiting for the battery to charge and then trying to turn it on, to no success.
Click to expand...
Click to collapse
If you can get to download mode, try flashing a stock file via Odin to reset your phone to working conditions. Thereafter, you can go back to a custom ROM. Would you recall what firmware version you were on prior to flashing CM? If it was anything older than 4.3 (e.g. 4.1.2, 4.1.1), you can Odin back to 4.1.1. If you already had 4.3, you would need to Odin back to 4.3 following the instructions posted in the thread below ..
http://forum.xda-developers.com/showthread.php?t=2722660&page=3. Scroll through carefully for the file you need for 4.3. Otherwise, you can find the Odin flash-able 4.1.1 stock file on sammobile.com
Larry2999 said:
If you can get to download mode, try flashing a stock file via Odin to reset your phone to working conditions. Thereafter, you can go back to a custom ROM. Would you recall what firmware version you were on prior to flashing CM? If it was anything older than 4.3 (e.g. 4.1.2, 4.1.1), you can Odin back to 4.1.1. If you already had 4.3, you would need to Odin back to 4.3 following the instructions posted in the thread below ..
http://forum.xda-developers.com/showthread.php?t=2722660&page=3. Scroll through carefully for the file you need for 4.3. Otherwise, you can find the Odin flash-able 4.1.1 stock file on sammobile.com
Click to expand...
Click to collapse
I have looked at the thread but I am new to all this stuff, how do I flash using Odin?
rohanr014 said:
I have looked at the thread but I am new to all this stuff, how do I flash using Odin?
Click to expand...
Click to collapse
First you will need to download and extract the Odin tool. Odin is Samsung's tool for flashing (installing) firmware. You can download Odin v3.07 via the link below ...
http://www.mediafire.com/download/772dlmuaxfgm0x2/Odin307.zip
Once you have downloaded it, extract the files and look for the executable file (*.exe). That's the one you will need to run to open Odin.
We also need to identify the appropriate firmware to flash. You did not answer the earlier question on what Android version your device was on prior to flashing the custom firmware. This is important to let us know which official version you can safely revert to (4.1.1 or 4.3). If you were an older version than 4.3, you should flash 4.1.1 but if you were already on 4.3, then you should stick to this. Either way, you can download the 4.1.1 file via this link .. http://rapidgator.net/file/681a28a5...ATT_I747UCDLK3_I747ATTDLK3_Original.zip.html?
Download the files to your PC and extract.
To flash via Odin, open Odin.exe on your PC
Click on the PDA tab and navigate to the file you just extracted. Select the file ending in *.tar.md5 (For 4.1.1, this would be I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5). Make sure this file is showing in the PDA tab.
Boot your phone into download mode and connect to your computer with a good quality micro-USB cable. Make sure your phone is recognized by Odin. You should see the message Added in the left pane.
Do not check or uncheck any boxes other than the defaults.
Click on start and waiting for firmware flashing to end and you see Pass. Your phone will reboot at this stage. You can disconnect from your PC
However, for 4.3, it looks like the Odin flash-able file has been taken offline so you would need to this via custom recovery. That's a different process so please revert on your Android version first so we'll know whether this is required or not
I was running JB 4.3, and I am planning to flash 4.1.1 as you've said. I am downloading that rom from the SamMobile site, however it is taking quite a while...
I understand that it shouldnt be a two minute download, however its been 2 hours and only 210 MB has been downloaded.
Also, I have Odin v3.09, which in the place of a PDA tab, there is an AP tab... should I place the file in the AP tab?
rohanr014 said:
I was running JB 4.3, and I am planning to flash 4.1.1 as you've said. I am downloading that rom from the SamMobile site, however it is taking quite a while...
I understand that it shouldnt be a two minute download, however its been 2 hours and only 210 MB has been downloaded.
Also, I have Odin v3.09, which in the place of a PDA tab, there is an AP tab... should I place the file in the AP tab?
Click to expand...
Click to collapse
Please do not try to flash 4.1.1 if you were on JB 4.3 otherwise you could hard brick your phone due to the secure bootloader in 4.3. You need to revert to stock 4.3 via custom recovery. You may go to the thread below for instructions...
http://forum.xda-developers.com/showthread.php?t=2658486
1) Flash custom recovery (I would suggest TWRP because of the GUI). In Odin v3.09 use the AP tab in place of PDA. You can download TWRP for your device via the link below ...
http://techerrata.com/file/twrp2/d2att/openrecovery-twrp-2.6.3.1-d2att.tar
2) Download the stock restore zip file in the thread above and copy to your (micro) SD card. The (TWRP) stock restore zip is also available via the following link .... http://www.mediafire.com/download/30idxwhg2hidxx2/ATT_I747_UCUEMJB_StockRestore_2282014.zip
3) Flash the custom recovery file via Odin. Remove battery immediately the flashing is complete to stop reboot.
4) Place the SD card with the recovery file in your phone
5) Reboot into recovery mode by simultaneously holding down the Volume Up, Home and Power buttons. Hold all buttons until you see the blue flash across your screen, then release power button but keep holding the volume up and home buttons until the Android image appears.
6) Select install and navigate to the stock restore file. Swipe across screen to flash and wait for installation to be complete.
7) Clear cache/dalvik and reboot to system
If you are unable to boot to recovery, then you may still try flashing using Odin v3.09. You may follow the instructions in the thread below and load all the respective partitions. You would need to use the version that has separate flashable files as the single *.tar file has been taken down.
Larry2999 said:
Please do not try to flash 4.1.1 if you were on JB 4.3 otherwise you could hard brick your phone due to the secure bootloader in 4.3. You need to revert to stock 4.3 via custom recovery. You may go to the thread below for instructions...
http://forum.xda-developers.com/showthread.php?t=2658486
1) Flash custom recovery (I would suggest TWRP because of the GUI). In Odin v3.09 use the AP tab in place of PDA. You can download TWRP for your device via the link below ...
http://techerrata.com/file/twrp2/d2att/openrecovery-twrp-2.6.3.1-d2att.tar
2) Download the stock restore zip file in the thread above and copy to your (micro) SD card. The (TWRP) stock restore zip is also available via the following link .... http://www.mediafire.com/download/30idxwhg2hidxx2/ATT_I747_UCUEMJB_StockRestore_2282014.zip
3) Flash the custom recovery file via Odin. Remove battery immediately the flashing is complete to stop reboot.
4) Place the SD card with the recovery file in your phone
5) Reboot into recovery mode by simultaneously holding down the Volume Up, Home and Power buttons. Hold all buttons until you see the blue flash across your screen, then release power button but keep holding the volume up and home buttons until the Android image appears.
6) Select install and navigate to the stock restore file. Swipe across screen to flash and wait for installation to be complete.
7) Clear cache/dalvik and reboot to system
If you are unable to boot to recovery, then you may still try flashing using Odin v3.09. You may follow the instructions in the thread below and load all the respective partitions. You would need to use the version that has separate flashable files as the single *.tar file has been taken down.
Click to expand...
Click to collapse
Just to reaffirm since I am not very experienced and do not wish to break my phone:
1) Download the twrp 2.6.3.1 d2att.tar file and flash it to my phone in download mode via Odin.
2)Download zip file on my computer, and take out the microSD from my phone, and copy the file to my microSD.
3) I am confused here because you stated to flash the custom recovery in step 1... anyways when flash is complete I immediately take my battery out to stop the reboot.
4) I insert the microSD with the zip file containing the stock rom
5) Now I should be able to reboot into recovery mode on my phone, though I could not beforehand.
6) Once in Recovery, go to Install and flash the custom stock.
7)Wipe dalvik cache and cache, and reboot to system.
Please clear up any confusion, I am very cautious and inexperienced. Sorry.
rohanr014 said:
Just to reaffirm since I am not very experienced and do not wish to break my phone:
1) Download the twrp 2.6.3.1 d2att.tar file and flash it to my phone in download mode via Odin.
2)Download zip file on my computer, and take out the microSD from my phone, and copy the file to my microSD.
3) I am confused here because you stated to flash the custom recovery in step 1... anyways when flash is complete I immediately take my battery out to stop the reboot.
4) I insert the microSD with the zip file containing the stock rom
5) Now I should be able to reboot into recovery mode on my phone, though I could not beforehand.
6) Once in Recovery, go to Install and flash the custom stock.
7)Wipe dalvik cache and cache, and reboot to system.
Please clear up any confusion, I am very cautious and inexperienced. Sorry.
Click to expand...
Click to collapse
Yes, you are correct. What you are doing in step 1) is flashing custom recovery to your phone. Custom recovery allows you install zip files to your phone and is more functional and versatile than stock recovery.
The zip file referred to in 2) is the stock restore zip. This is the file you will be flashing from (custom) recovery and is the one from the following link (http://www.mediafire.com/download/30...re_2282014.zip). Once you have downloaded it to your computer, save to an SD card so you can insert it into your phone to flash.
The battery pull is after flashing the TWRP file. You then have to boot into (custom) recovery mode to flash the stock restore zip from the SD card.
You are OK on the other steps. Trust this clarifies. Let me know if you encounter any issues.
I have done everything you said, I flashed the TWRP file via Odin, and then i copied the stock zip file to my microSD and put it back into my phone.
I am able to boot into recovery, and everytime I go to flash the stock rom, midway through the flash my phone starts rebooting. Even if I try to clear dalvik cache and cache first, once they are cleared my phone automatically starts rebooting. What do I do now? The zip file is there and I can reach TWRP recovery, but the flash wont complete because my phone starts rebooting. I am at a 100% battery right now so I do not know what the cause of this could be. Please help, I cannot tell what I did wrong if I did do anything wrong.
Try installing the latest version of Philz Touch for the d2lte. Some people have good results with TWRP. I found Philz Touch, which is based on CWM, better for my purposes. Philz can be installed via Odin as long as you down the tar version.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte
Larry2999 said:
Yes, you are correct. What you are doing in step 1) is flashing custom recovery to your phone. Custom recovery allows you install zip files to your phone and is more functional and versatile than stock recovery.
The zip file referred to in 2) is the stock restore zip. This is the file you will be flashing from (custom) recovery and is the one from the following link (http://www.mediafire.com/download/30...re_2282014.zip). Once you have downloaded it to your computer, save to an SD card so you can insert it into your phone to flash.
The battery pull is after flashing the TWRP file. You then have to boot into (custom) recovery mode to flash the stock restore zip from the SD card.
You are OK on the other steps. Trust this clarifies. Let me know if you encounter any issues.
Click to expand...
Click to collapse
Ok, something very strange has occured.
Since my phone would not flash the original stock rom, I decided to go ahead and flash CM10.2 and its gapps to see if it the problem was with my phone or with the file. Everything worked fine and my phone booted and ran CM10.2, but then I had absolutely no signal anywhere. I could confirm something was wrong because there were multiple AT&T users near me that had good signal. So then I went to flash the stock rom, and it worked. I cleared dalvik and cache like normal after all these flashes and performed factory resets, however when I flashed this stock rom, it worked but 1) I could not connect to Wifi 2) I could not use apps with root requirements, and Root Checker said I did not have root access, even though I had definitely rooted my phone earlier when I first ran CM11 and CM10.2
Should I root again? Please help, my phone is working and I can go into download, stock recovery, and normal mode.
audit13 said:
Try installing the latest version of Philz Touch for the d2lte. Some people have good results with TWRP. I found Philz Touch, which is based on CWM, better for my purposes. Philz can be installed via Odin as long as you down the tar version.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte
Click to expand...
Click to collapse
The whole idea was to get your phone back to working state. Thereafter, you can build up on the food chain. The stock file you flashed restores the phone to near factory settings including a complete stock (official) firmware, stock recovery, resetting the flash counter. Unfortunately, it also removes root as well. You can, however, re-root in a number of ways. You may also do as Audit advised and reflash Philz Touch custom recovery which would allow you flash any custom ROM of your choice. You do not necessarily need to root to flash custom ROMs if you have custom recovery. However, if you need to use apps which require root, I would recommend you try SafeRoot (http://forum.xda-developers.com/showthread.php?t=2565758). Very easy to use and worked quite well for me.
Finally, you should be able to restore your Wi-Fi from settings. Wi-Fi setup should have happened during the set-up process upon reboot after the firmware installation but sometimes this step is skipped. If you go to Settings, you should be able to enable and set up Wi-Fi.
Related
Hi,
I have been rooting for a while with my evo 4g which is basically just recoveries & zip files.
Currently I have updated to Calk's ICS Beta 3 rom with modem FC05. I have read some stuff here & there that talk about having issues going from a ICS rom back to a GB nandroid.
I have installed Kies opened Odin, looked at the Wiki here:
http://forum.xda-developers.com/showthread.php?t=1274337
I just dont quite get in terms of flashing zips through odin. I keep reading people say to odin back to stock & then flash from there.
How do I do that? I looked at QB777's video on youtube, but it seems like PIT files arent used much at this point.
Any advice would be great.
Thanks,
Rich
Ok, basically when you Odin back to stock, it involves flashing a .tar ROM from the pda slot in desktop Odin and not zip file like you would in CWM. Once you restore back to stock, you can find a .tar recovery, I personally use rogue which will allow you to have cwm-based recovery for flashing zips. All the links should be in development. Let me know if you still need help
Edit-what Odin does is it allows you to flash Roms, kernels, moderns, etc even if you don't have a custom recovery, provided that they are in the correct format, like .tar extension
Sent from my SPH-D710 using xda premium
so when i flash a tar, I go into download mode, open odin, point it to a stock rooted tar file that has CWR & I am back to stock ready to flash to something else?
Can you help me find those files? A stock rooted, CWR should do the trick.
RichTJ99 said:
so when i flash a tar, I go into download mode, open odin, point it to a stock rooted tar file that has CWR & I am back to stock ready to flash to something else?
Can you help me find those files? A stock rooted, CWR should do the trick.
Click to expand...
Click to collapse
Ok, so you go into a download mode on your phone, open Odin, plug in your USB cord, ODIN should recognize your phone provided you installed the right drivers. You're good if you get the yellow box that says 0 com, something something. The only box that should be checked is Auto Reboot in Odin.
The easiest way that I've been going back and forth between GB and ICS is to install the rooted EL29 .tar version here
http://little-melon.com/sfhub/SPH-D710.EL29_CL852097_ROOTED-sfx.exe
You would need to extract the file until you get a folder with tar.md5 name. Example of the file I provided would be SPH-D710.EL29_CL852097_ROOTED_PDA.tar.md5 once you unzip it. This is the file you would put on the PDA slot of your desktop Odin.
Once you do this, Odin will start flashing and be done in like 1-2 minutes and auto reboot. Do not do anything to shut down, unplug, or mess with the device while Odin is flashing or you may end up bricking it. Once your phone reboots you will be rooted and stock based with EL 29 modem and kernel, which is the latest official Sprint OTA. If you want to get a recovery after this,you would need to go back into Odin and flash a kernel that has a recovery baked in. Like I said I use Rogue and the link would be here for Rogue Stock EL29-
http://goo-inside.me/kernels/TeamRo.../rogue_ET-recoveryonly-1.1.4-rc0-odin.tar.md5
Flashing this in Odin you will get CWM-based recovery and can start backing up, flashing different ROMS.
Hope this helps.
This is very helpful. I am stuck at the SGS2 boot screen after flashing MIJJs Goodness 1.8, can't boot in to recovery, only download mode. How do I fix this?
thefoss said:
This is very helpful. I am stuck at the SGS2 boot screen after flashing MIJJs Goodness 1.8, can't boot in to recovery, only download mode. How do I fix this?
Click to expand...
Click to collapse
Flash a recovery in download mode that I linked. It's rogue recovery
Sent from my SPH-D710 using xda premium
Just to confirm, using the files you had here, I open odin in download mode, choose PDA (check the check box) point it to the tar.md5 file, hit start & wait a few minutes until it auto reboots?
How do I flash the recovery? Is it also the PDA?
I have been flashing modems in CWR, not odin & I just want to make sure that recovery or rom itself, just PDA & nothing else checked (but PDA)?
stargaterules said:
Ok, so you go into a download mode on your phone, open Odin, plug in your USB cord, ODIN should recognize your phone provided you installed the right drivers. You're good if you get the yellow box that says 0 com, something something. The only box that should be checked is Auto Reboot in Odin.
The easiest way that I've been going back and forth between GB and ICS is to install the rooted EL29 .tar version here
http://little-melon.com/sfhub/SPH-D710.EL29_CL852097_ROOTED-sfx.exe
You would need to extract the file until you get a folder with tar.md5 name. Example of the file I provided would be SPH-D710.EL29_CL852097_ROOTED_PDA.tar.md5 once you unzip it. This is the file you would put on the PDA slot of your desktop Odin.
Once you do this, Odin will start flashing and be done in like 1-2 minutes and auto reboot. Do not do anything to shut down, unplug, or mess with the device while Odin is flashing or you may end up bricking it. Once your phone reboots you will be rooted and stock based with EL 29 modem and kernel, which is the latest official Sprint OTA. If you want to get a recovery after this,you would need to go back into Odin and flash a kernel that has a recovery baked in. Like I said I use Rogue and the link would be here for Rogue Stock EL29-
http://goo-inside.me/kernels/TeamRo.../rogue_ET-recoveryonly-1.1.4-rc0-odin.tar.md5
Flashing this in Odin you will get CWM-based recovery and can start backing up, flashing different ROMS.
Hope this helps.
Click to expand...
Click to collapse
Reverting back to GB ROM
I recently switched back from ICS to GB and did not have any problems with the change back. I simply went into my SD card manually took everything off except my chaulkins format all and my wifi tether hack. I then went into recovery mode and did a wipe all. Then went to zip files, ran the format all, then did an install of the new ROM and it works great!
I have PayPal for which I will use to donate an amount to the person(s) who can help me.
I just recently got a new GS4 becuase of an insurance replacement. I looked at the specs before I flashed TWRP. After failing to install 4.2.2 ROMS, I finally found a 4.3 mk2 stock ROM to install. I have the phone working. But TWRP is not installed. My phone tests positive for ROOT with Rootchecker
Currently I'm getting this message everytime I boot "Kernel is not seandroid enforcing"
I have multiple 4.4.2 and 4.3 ROMs I like to use on my SD card, I'd like to continue from a TWRP backup i've made using that recovery.
Here are my current specs:
Model
SGH-M919
Android Version
4.3
Baseband
M919UVUEMK2
Kernel Version
[email protected] #1
Build Number
JSS15J.M919UVUEMK2
SELinux status
Permissive
Secure boot status
Type: Samsung
The replacement phone was probably already on the MK2 bootloader and modem when you received it. Which means you had Knox pre-installed and tripped it when you rooted the phone. The "kernel is not seandroid enforcing" error message does not affect the functioning of your phone in any way. It's just a part of the Knox bootloader. You can continue to re-install TWRP recovery and flash any ROM you want. Your phone will function as normal. Just don't try reverting to the 4.2.2 MDL baseband/modem because it won't work. There's currently no way to revert to 4.2.2 MDL if you're on MK2 or higher. If you want to get rid of the message just flash the stock kernel in a recovery.
Try to be careful with your replacement phone now since you tripped Knox. It might be harder to get a replacement depending on how T-Mobile is.
No donations are needed for these kinds of things.
Ok Im flashing Infamous 4.4.2 Version 3.7 after ODIN flashing TWRP 2.6.3.1
The only reason I'm flashing that ROM is because no backups are not showing theirselvesin the Restore option, what would cause that?
Is TWRP 2.5.0.2 better?
Did I miss a step? All my actions were using odin to flash the twrp recover, and then flash another ROM, or restoring a Previous Back. Should I have flashed a rooted bootloader, or rooted firmware or anything besides those two?
nopotential said:
Ok Im flashing Infamous 4.4.2 Version 3.7 after ODIN flashing TWRP 2.6.3.1
The only reason I'm flashing that ROM is because no backups are not showing theirselvesin the Restore option, what would cause that?
Is TWRP 2.5.0.2 better?
Click to expand...
Click to collapse
The backups could either be stored on the internal or external SD card. Try switching between both and see if they appear. They'll be in the TWRP folder on the root of either the internal/external storage.
I've had no problems with the latest TWRP v2.7.0.1. If you have problems then use v2.5.0.2.
If you have connection problems after installing Infamous 4.4.2, you might need to Odin the newest KitKat NB4 modem found here.
Download the file and flash MODEM.bin via Odin under the phone slot.
Personally, since you already tripped Knox, you should just Odin flash the complete NB4 KitKit stock ROM which will give you the newest modem without having to mess with anything else or do various flashing of things. Everything for flashing NB4 KitKit can be found here. Download the full 4.4 firmware from here.
brian117 said:
The backups could either be stored on the internal or external SD card. Try switching between both and see if they appear. They'll be in the TWRP folder on the root of either the internal/external storage.
I've had no problems with the latest TWRP v2.7.0.1. If you have problems then use v2.5.0.2.
If you have connection problems after installing Infamous 4.4.2, you might need to Odin the newest KitKat NB4 modem found here.
Download the file and flash MODEM.bin via Odin under the phone slot.
Personally, since you already tripped Knox, you should just Odin flash the complete NB4 KitKit stock ROM which will give you the newest modem without having to mess with anything else or do various flashing of things. Everything for flashing NB4 KitKit can be found here. Download the full 4.4 firmware from here.
Click to expand...
Click to collapse
I want to use a custom ROM because of the features. Should I still flash the latest firmware, the KitKat NB4?
nopotential said:
I want to use a custom ROM because of the features. Should I still flash the latest firmware, the KitKat NB4?
Click to expand...
Click to collapse
You will still be able to flash the custom ROM after you Odin flash the KitKat NB4 firmware. The steps are as followed:
1. Open Odin v3.07.
2. UNcheck the boxes that say auto reboot and f. reset time.
3. Power off your phone and enter Download Mode by holding down the Vol DOWN + Home + Power buttons at the same time. Hit Vol UP after the warning message comes up.
4. Connect your phone to your PC and wait for it to appear in the COM: box in Odin.
5. Click the PDA tab and select the "M919UVUFNB4_HOME.tar.md5" file that you extracted from http://www.cheatersedge.org/android/m919/M919UVUFNB4_M919TMBFNB4_TMB_FENNY_FIXED.zip.
6. Wait for it to run an MD5 check. The program will freeze and unfreeze when it's done.
7. Click start and let Odin flash the ROM.
8. When it says PASS, unplug the phone and long press the power button until the phone turns off and reboots on its own. Leave it alone for about 2 minutes and then power it off.
9. Reboot back into Download Mode and then flash the CF-Autoroot found here.
10. Flash that via the PDA slot in Odin, reboot, and you should now be rooted. You can then continue to do everything else such as install TWRP and flash Infamous 4.4.2.
brian117 said:
You will still be able to flash the custom ROM after you Odin flash the KitKat NB4 firmware. The steps are as followed:
1. Open Odin v3.07.
2. UNcheck the boxes that say auto reboot and f. reset time.
3. Power off your phone and enter Download Mode by holding down the Vol DOWN + Home + Power buttons at the same time. Hit Vol UP after the warning message comes up.
4. Connect your phone to your PC and wait for it to appear in the COM: box in Odin.
5. Click the PDA tab and select the "M919UVUFNB4_HOME.tar.md5" file that you extracted from http://www.cheatersedge.org/android/m919/M919UVUFNB4_M919TMBFNB4_TMB_FENNY_FIXED.zip.
6. Wait for it to run an MD5 check. The program will freeze and unfreeze when it's done.
7. Click start and let Odin flash the ROM.
8. When it says PASS, unplug the phone and long press the power button until the phone turns off and reboots on its own. Leave it alone for about 2 minutes and then power it off.
9. Reboot back into Download Mode and then flash the CF-Chain's Autoroot found here.
10. Flash that via the PDA slot in Odin, reboot, and you should now be rooted. You can then continue to do everything else such as install TWRP and flash Infamous 4.4.2.
Click to expand...
Click to collapse
Thanks for the step by step. I'm following it now. The NB4_HOME.tar.md5 is taking a long time to flash with ODIN. But I will follow it closely, if everything looks good I'll send out a donation, I appreciate your help.
nopotential said:
Thanks for the step by step. I'm following it now. The NB4_HOME.tar.md5 is taking a long time to flash with ODIN. But I will follow it closely, if everything looks good I'll send out a donation, I appreciate your help.
Click to expand...
Click to collapse
Like I said donations are not needed. It does take a while for it to flash through Odin so that's normal.
It was boot looping, went into optimizing apps to something about media database multiple times. I went into the stock recovery and cleared cache and factory reset. It's trying to boot now.
nopotential said:
It was boot looping, went into optimizing apps to something about media database multiple times. I went into the stock recovery and cleared cache and factory reset. It's trying to boot now.
Click to expand...
Click to collapse
My Wifi is unable to be turned on in this stock rom. I'm going to flash TWRP and then Infamous
nopotential said:
It was boot looping, went into optimizing apps to something about media database multiple times. I went into the stock recovery and cleared cache and factory reset. It's trying to boot now.
Click to expand...
Click to collapse
Yes that will happen. You just boot into recovery and factory reset and it will boot. Let me know if that works.
nopotential said:
My Wifi is unable to be turned on in this stock rom. I'm going to flash TWRP and then Infamous
Click to expand...
Click to collapse
If you continue to have WiFi problems, flash this via recovery.
brian117 said:
Yes that will happen. You just boot into recovery and factory reset and it will boot. Let me know if that works.
If you continue to have WiFi problems, flash this via recovery.
Click to expand...
Click to collapse
It looks like everything is looking good by following your list. Thank you.
nopotential said:
It looks like everything is looking good by following your list. Thank you.
Click to expand...
Click to collapse
Awesome! Good to hear man. Enjoy KitKat and the newest modem. The new modem has gave a significant reception boost for a lot of people. Hope it's the same for you. And please check your PM.
-Deleted-
I follow this thread: http://forum.xda-developers.com/showthread.php?t=2549068
I put this file on the sd card debrick-SGH-I747U-CUEMJB3.img, made sure phone battery was charged up. Tried to enter download mode, it completely skipped it and phone is now running stock 4.3?? I try to enter recovery mode and it still just starts up with Stock 4.3.
So I assume it is running completely of the sd card. I can enter Stock Recovery but not sure what I do now. If i pull the card the phone is dead like before. Red light when plugged in, nothing happens with any button pushes.
I guess I am wondering what my next step is?
Thanks
Ruscicap said:
I follow this thread: http://forum.xda-developers.com/showthread.php?t=2549068
I put this file on the sd card debrick-SGH-I747U-CUEMJB3.img, made sure phone battery was charged up. Tried to enter download mode, it completely skipped it and phone is now running stock 4.3?? I try to enter recovery mode and it still just starts up with Stock 4.3.
So I assume it is running completely of the sd card. I can enter Stock Recovery but not sure what I do now. If i pull the card the phone is dead like before. Red light when plugged in, nothing happens with any button pushes.
I guess I am wondering what my next step is?
Thanks
Click to expand...
Click to collapse
The device is indeed booting off the SD card. However, if you can boot into system, you should also be able to boot into download and recovery modes using the 3-button combo. If you can get into download mode, you can try using Odin v 3.07 to flash the complete 4.3 stock image. Download the Odin flashable zip file from the link below to your computer. Extract the tar.md5 file and verify the MD5 to be sure it downloaded correctly.
http://www.androidfilehost.com/?fid=23329332407590581
Download Odin v3.07 and run Odin.exe for the flashing tool. With your debrick card, boot into download mode by pressing the Volume Down, Home and Power button. If you can't get into download mode with the 3-button combo, suggest you try a USB jig. Use Odin to flash the stock file to your phone. If the flashing is successful, the device should be able to boot normally after this without the debrick card.
Cool thanks Larry2999. I will have to go the USB jig route it won't go into recovery or download. I can only get into Stock recovery. Any specifics I need to know when getting a usb jig? Thanks again for you response. I am just glad it is working now. But probably don't want to run off SD forever.
Ruscicap said:
Cool thanks Larry2999. I will have to go the USB jig route it won't go into recovery or download. I can only get into Stock recovery. Any specifics I need to know when getting a usb jig? Thanks again for you response. I am just glad it is working now. But probably don't want to run off SD forever.
Click to expand...
Click to collapse
There is a thread somewhere on how to make a D-I-Y jig. You can, however, buy it cheaply online for about $3. In buying one, you'd only need to be sure it states that it works with the S3.
Looks like you are able to get into recovery now but you have stock, rather than custom, recovery. There is only one recovery partition and the default is stock, unless, you flash a custom recovery. If you had custom recovery, it would have been possible to flash a 4.3 stock restore zip via (custom) recovery. To flash custom recovery, however, you'd need Odin in download mode so we are back to the problem with getting into download mode.
Thanks Larry ordering jig tomorrow
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Larry2999 said:
There is a thread somewhere on how to make a D-I-Y jig. You can, however, buy it cheaply online for about $3. In buying one, you'd only need to be sure it states that it works with the S3.
Looks like you are able to get into recovery now but you have stock, rather than custom, recovery. There is only one recovery partition and the default is stock, unless, you flash a custom recovery. If you had custom recovery, it would have been possible to flash a 4.3 stock restore zip via (custom) recovery. To flash custom recovery, however, you'd need Odin in download mode so we are back to the problem with getting into download mode.
Click to expand...
Click to collapse
Do you suggest a reliable 4.3 stock to flash or install through ODIN? This is how I got to where I am, something screwed up trying to install stock 4.3 through ODIN.
Thanks again for your help. Jig should be here in a couple days.
Ruscicap said:
Do you suggest a reliable 4.3 stock to flash or install through ODIN? This is how I got to where I am, something screwed up trying to install stock 4.3 through ODIN.
Thanks again for your help. Jig should be here in a couple days.
Click to expand...
Click to collapse
Yes, the ONLY way to recover is to flash a complete 4.3 stock image. Are you sure you bricked in the first instance by flashing 4.3 via Odin? The only Odin compatible stock 4.3 file I'm aware of is the one in the link I forwarded earlier. This was only recently developed and appears to have been used by several people without problem. You may check to be sure you were not trying to flash a 4.1.1 file in error. Apologies if I sound like I'm second guessing you but flashing 4.1.1 via Odin usually results in the kind of hard brick you experienced.
The other alternative would be to flash custom recovery (TWRP or CWM) via Odin and then use custom recovery to flash a complete 4.3 stock image. You will find the instructions in the following thread ...
http://forum.xda-developers.com/showthread.php?t=2658486
Download the stock restore zip for your preferred custom recovery option to your PC and save to your phone's internal storage. If you want to use TWRP, you can find the Odin flashable file for TWRP via the link below ...
http://techerrata.com/file/twrp2/d2att/openrecovery-twrp-2.6.3.1-d2att.tar
If, however, you go the first option and flash the 4.3 file via Odin, be sure to use Odin v 3.07. You'll see the Odin flashable file and instructions on page 4 of the following thread ...
http://forum.xda-developers.com/showthread.php?t=2722660&page=4
or you can download directly from here ...
http://www.androidfilehost.com/?fid=23329332407590581
Thanks again. Not really sure what went wrong, tried to use odin to install 4.3 Stock from this thread. http://forum.xda-developers.com/showthread.php?t=2658486
I will try to follow your threads and get it right this time.
Ruscicap said:
Thanks again. Not really sure what went wrong, tried to use odin to install 4.3 Stock from this thread. http://forum.xda-developers.com/showthread.php?t=2658486
I will try to follow your threads and get it right this time.
Click to expand...
Click to collapse
The file from that thread is for (custom) recovery only. You can't flash zips via Odin so if you are using that file, you would need to first install custom recovery via Odin and then flash the zip via custom recovery.
Hey Larry, just wanted to say thanks. Phone is back working properly, 4.3 installed with no problem. Took me awhile never had the time. So fathers day was my chance to get this working. Flashed twrp and then the stock zip. Worked great.
Thanks again for all your help, I very much appreciate it.
Ruscicap said:
Hey Larry, just wanted to say thanks. Phone is back working properly, 4.3 installed with no problem. Took me awhile never had the time. So fathers day was my chance to get this working. Flashed twrp and then the stock zip. Worked great.
Thanks again for all your help, I very much appreciate it.
Click to expand...
Click to collapse
Glad to know it's working OK now. Kind regards
I apologize in advance if this is in the wrong thread or section, I'm new to this and am kind of stuck on what to do next. If it is in the wrong section can you let me know where to post?
I'm not sure what the previous version my phone was on but in the recovery menu I see KOT49H.I747UCUFNE4 so I assume it was 4.4.2
Over the weekend I tried to update my stock I747 (no root) through menus using check for update and when it completed my phone would no longer boot.
It gets stuck on the ATT logo and when I try to wipe it in recovery mode it still gets stuck on the same screen.
I have also tried to use Kies but the devise does not show up under the emergency recovery option even though my phone can connect to the computer.
However I have no problems connecting to Odin in download mode.
So what would be the best option for me if I dont want to root my device? Can I use Odin or should I be using a different program?
If I have to root should I follow enewman17 tutorial? If so what step should I start at?
Thanks!
Are you running a stock recovery? Did you wipe everything in recovery?
yep stock recovery, tried to wipe everything but i get the same problem.
If I were in your situation, I would install a custom recovery and custom rom such as cm10.2 to get the phone up and running to verify the bootloader and modem currently on the phone.
Should I be installing the recovery through odin or an sd card? Do you have a link for a tutorial, I've looked through t3chn0s1s's sticky but most instructions seem like they are for phones that can boot.
The method I see using an sd card needs a terminal but i don't think i can get one because I can't boot my phone, is that correct?
Download the latest tar.md5 file from here: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/
Copy the latest CM10.2 or CM11 to your SD card. Place the SD card in the phone.
Flash Philz in the PDA section of Odin 3.07 and don't check anything except F.Reset Time. When you see "Reset" in the status window, disconnet the USB cable, pull the battery, replace the battery, boot into recovery, wipe cache, data, Dalvik, system, flash CM from the SD card, and reboot.
Thanks got it working last night!
If you want to run the latest CM11 or AOSP ROMs, you may have to update to the latest bootoader and modem.
my S4 SGH-M919 is still 4.2.2 with rooted. Now I want to update any custom ROM 5.1 lollipop. So how can i do it? Pls show me step by step. I'm so glad with any help. Thanks a lot.
Please use search functionality.... Either in Google or xda.... "How to install CyanogenMod on SGH-M919".. There are several articles/videos on installing custom ROM for your device....
Sent from my SGH-M919 using Tapatalk
Thanks for your reply. Just a question. Can i flash recovery twrp 2.8.4.0. Then flash any custom rom 5.1 through recovery? Or i have to update stock rom with new modem and kernel then flash rom 5.1?
nickytun said:
Thanks for your reply. Just a question. Can i flash recovery twrp 2.8.4.0. Then flash any custom rom 5.1 through recovery? Or i have to update stock rom with new modem and kernel then flash rom 5.1?
Click to expand...
Click to collapse
Should update your recovery to 2.8.7.0 to be sure everything flashes correctly. You dont have to update stock rom because there is no lollipop for m919.
lordodin912 said:
Should update your recovery to 2.8.7.0 to be sure everything flashes correctly. You dont have to update stock rom because there is no lollipop for m919.
Click to expand...
Click to collapse
Thanks man!!! So I need to update recovery then flash rom and no need to worry about modem and kernel, right?
Newer custom ROMs may need a KK bootloader and modem to function properly.
audit13 said:
Newer custom ROMs may need a KK bootloader and modem to function properly.
Click to expand...
Click to collapse
So what should i do now? Pls show me. Thanks a lot
Download the latest stock ROM for the m919 from here: http://www.sammobile.com/firmwares/database/SGH-M919/ . Downloading from sammobile may take a long time but it is good to have a copy of the ROM in order to flash back to stock when necessary. The file needs to be unzipped once to yield a tar.md5 file.
Download the Odin 3.07 from here: https://www.google.ca/url?sa=t&rct=...5QWImOPDJboTA_V3D5S9eA&bvm=bv.112454388,d.amc . I like Odin 3.07 because it has always worked for everything I have done to my s2, s3, s4, and Note 3.
Backup your data because the phone needs to be factory reset before booting the stock KK ROM.
Open Odin, click on PDA, browse to and select the stock tar.md5 file you downloaded from sammobile, uncheck everything except f.reset time, put the phone into download mode and connect it to the computer, flash the phone, when you see the word "reset" in the status window, remove USB cable, remove battery, replace battery, boot into recovery by pressing the required button combination, wipe data and cache in recovery, reboot the phone. It will take quite a while for the phone to boot into the stock ROM, be patient.
Once the phone is up and running, download the latest tar version of TWRP for the m919 from here: https://dl.twrp.me/jfltetmo/
Open Odin, click on PDA, browse to and select the TWRP tar file you downloaded, uncheck everything except f.reset time, put the phone into download mode and connect it to the computer, flash the phone, when you see the word "reset" in the status window, remove USB cable, remove battery, replace battery, boot into TWRP by pressing the required button combination. Once you are satisfied that TWRP is working properly, reboot the phone.
Now that TWRP is on the phone, you will be able to flash custom ROMs.
audit13 said:
Download the latest stock ROM for the m919 from here: http://www.sammobile.com/firmwares/database/SGH-M919/ . Downloading from sammobile may take a long time but it is good to have a copy of the ROM in order to flash back to stock when necessary. The file needs to be unzipped once to yield a tar.md5 file.
Download the Odin 3.07 from here: https://www.google.ca/url?sa=t&rct=...5QWImOPDJboTA_V3D5S9eA&bvm=bv.112454388,d.amc . I like Odin 3.07 because it has always worked for everything I have done to my s2, s3, s4, and Note 3.
Backup your data because the phone needs to be factory reset before booting the stock KK ROM.
Open Odin, click on PDA, browse to and select the stock tar.md5 file you downloaded from sammobile, uncheck everything except f.reset time, put the phone into download mode and connect it to the computer, flash the phone, when you see the word "reset" in the status window, remove USB cable, remove battery, replace battery, boot into recovery by pressing the required button combination, wipe data and cache in recovery, reboot the phone. It will take quite a while for the phone to boot into the stock ROM, be patient.
Once the phone is up and running, download the latest tar version of TWRP for the m919 from here: https://dl.twrp.me/jfltetmo/
Open Odin, click on PDA, browse to and select the TWRP tar file you downloaded, uncheck everything except f.reset time, put the phone into download mode and connect it to the computer, flash the phone, when you see the word "reset" in the status window, remove USB cable, remove battery, replace battery, boot into TWRP by pressing the required button combination. Once you are satisfied that TWRP is working properly, reboot the phone.
Now that TWRP is on the phone, you will be able to flash custom ROMs.
Click to expand...
Click to collapse
Thanks so much. I'll try it.