Related
Hi,
I have been rooting for a while with my evo 4g which is basically just recoveries & zip files.
Currently I have updated to Calk's ICS Beta 3 rom with modem FC05. I have read some stuff here & there that talk about having issues going from a ICS rom back to a GB nandroid.
I have installed Kies opened Odin, looked at the Wiki here:
http://forum.xda-developers.com/showthread.php?t=1274337
I just dont quite get in terms of flashing zips through odin. I keep reading people say to odin back to stock & then flash from there.
How do I do that? I looked at QB777's video on youtube, but it seems like PIT files arent used much at this point.
Any advice would be great.
Thanks,
Rich
Ok, basically when you Odin back to stock, it involves flashing a .tar ROM from the pda slot in desktop Odin and not zip file like you would in CWM. Once you restore back to stock, you can find a .tar recovery, I personally use rogue which will allow you to have cwm-based recovery for flashing zips. All the links should be in development. Let me know if you still need help
Edit-what Odin does is it allows you to flash Roms, kernels, moderns, etc even if you don't have a custom recovery, provided that they are in the correct format, like .tar extension
Sent from my SPH-D710 using xda premium
so when i flash a tar, I go into download mode, open odin, point it to a stock rooted tar file that has CWR & I am back to stock ready to flash to something else?
Can you help me find those files? A stock rooted, CWR should do the trick.
RichTJ99 said:
so when i flash a tar, I go into download mode, open odin, point it to a stock rooted tar file that has CWR & I am back to stock ready to flash to something else?
Can you help me find those files? A stock rooted, CWR should do the trick.
Click to expand...
Click to collapse
Ok, so you go into a download mode on your phone, open Odin, plug in your USB cord, ODIN should recognize your phone provided you installed the right drivers. You're good if you get the yellow box that says 0 com, something something. The only box that should be checked is Auto Reboot in Odin.
The easiest way that I've been going back and forth between GB and ICS is to install the rooted EL29 .tar version here
http://little-melon.com/sfhub/SPH-D710.EL29_CL852097_ROOTED-sfx.exe
You would need to extract the file until you get a folder with tar.md5 name. Example of the file I provided would be SPH-D710.EL29_CL852097_ROOTED_PDA.tar.md5 once you unzip it. This is the file you would put on the PDA slot of your desktop Odin.
Once you do this, Odin will start flashing and be done in like 1-2 minutes and auto reboot. Do not do anything to shut down, unplug, or mess with the device while Odin is flashing or you may end up bricking it. Once your phone reboots you will be rooted and stock based with EL 29 modem and kernel, which is the latest official Sprint OTA. If you want to get a recovery after this,you would need to go back into Odin and flash a kernel that has a recovery baked in. Like I said I use Rogue and the link would be here for Rogue Stock EL29-
http://goo-inside.me/kernels/TeamRo.../rogue_ET-recoveryonly-1.1.4-rc0-odin.tar.md5
Flashing this in Odin you will get CWM-based recovery and can start backing up, flashing different ROMS.
Hope this helps.
This is very helpful. I am stuck at the SGS2 boot screen after flashing MIJJs Goodness 1.8, can't boot in to recovery, only download mode. How do I fix this?
thefoss said:
This is very helpful. I am stuck at the SGS2 boot screen after flashing MIJJs Goodness 1.8, can't boot in to recovery, only download mode. How do I fix this?
Click to expand...
Click to collapse
Flash a recovery in download mode that I linked. It's rogue recovery
Sent from my SPH-D710 using xda premium
Just to confirm, using the files you had here, I open odin in download mode, choose PDA (check the check box) point it to the tar.md5 file, hit start & wait a few minutes until it auto reboots?
How do I flash the recovery? Is it also the PDA?
I have been flashing modems in CWR, not odin & I just want to make sure that recovery or rom itself, just PDA & nothing else checked (but PDA)?
stargaterules said:
Ok, so you go into a download mode on your phone, open Odin, plug in your USB cord, ODIN should recognize your phone provided you installed the right drivers. You're good if you get the yellow box that says 0 com, something something. The only box that should be checked is Auto Reboot in Odin.
The easiest way that I've been going back and forth between GB and ICS is to install the rooted EL29 .tar version here
http://little-melon.com/sfhub/SPH-D710.EL29_CL852097_ROOTED-sfx.exe
You would need to extract the file until you get a folder with tar.md5 name. Example of the file I provided would be SPH-D710.EL29_CL852097_ROOTED_PDA.tar.md5 once you unzip it. This is the file you would put on the PDA slot of your desktop Odin.
Once you do this, Odin will start flashing and be done in like 1-2 minutes and auto reboot. Do not do anything to shut down, unplug, or mess with the device while Odin is flashing or you may end up bricking it. Once your phone reboots you will be rooted and stock based with EL 29 modem and kernel, which is the latest official Sprint OTA. If you want to get a recovery after this,you would need to go back into Odin and flash a kernel that has a recovery baked in. Like I said I use Rogue and the link would be here for Rogue Stock EL29-
http://goo-inside.me/kernels/TeamRo.../rogue_ET-recoveryonly-1.1.4-rc0-odin.tar.md5
Flashing this in Odin you will get CWM-based recovery and can start backing up, flashing different ROMS.
Hope this helps.
Click to expand...
Click to collapse
Reverting back to GB ROM
I recently switched back from ICS to GB and did not have any problems with the change back. I simply went into my SD card manually took everything off except my chaulkins format all and my wifi tether hack. I then went into recovery mode and did a wipe all. Then went to zip files, ran the format all, then did an install of the new ROM and it works great!
Noob here, please be patient.
Samsung SGH-T989D was running CM 9. Did a factory reset as I was planing to sell the phone, but once I did that the phone was stuck in a loop at the boot logo.
Tried upgrading via recovery mode to the new CM 10, but was still stuck in boot loop.
Tried clearing cache, etc...but nothing would work.
So I downloaded the newest stock Telus ROM, put the phone into download mode and used Odin to flash - however Odin failed.
Now the phone won't start and I immediately get the following message: "Firmware upgrade encounted an issue. Please select recovery mode in Kies and try again".
I tried Kies recovery mode but it does not see my phone. Odin still sees it, but wont flash it.
I found this thread for the S2 - http://forum.xda-developers.com/showthread.php?t=1457458.
But I have not been able to find one for the S2x.. Where would I find the bootloader and kernel to flash as it explains in the above guide...
Or maybe someone has other advice?
Thanks for your help!!
http://forum.xda-developers.com/showthread.php?t=2076939
Lots of stuff the t989 there. Just be sure you actually have the t989 or t989d.
Or look through our dev section for probably more up to date stuff.
Sent from my cell phone telephone
---------- Post added at 07:35 PM ---------- Previous post was at 07:34 PM ----------
Forget the other thread you found. That's not our phone and anything there that you flash could brick your phone!!
Sent from my cell phone telephone
fruzmatik said:
Noob here, please be patient.
Samsung SGH-T989D was running CM 9. Did a factory reset as I was planing to sell the phone, but once I did that the phone was stuck in a loop at the boot logo.
Tried upgrading via recovery mode to the new CM 10, but was still stuck in boot loop.
Tried clearing cache, etc...but nothing would work.
So I downloaded the newest stock Telus ROM, put the phone into download mode and used Odin to flash - however Odin failed.
Now the phone won't start and I immediately get the following message: "Firmware upgrade encounted an issue. Please select recovery mode in Kies and try again".
I tried Kies recovery mode but it does not see my phone. Odin still sees it, but wont flash it.
I found this thread for the S2 - http://forum.xda-developers.com/showthread.php?t=1457458.
But I have not been able to find one for the S2x.. Where would I find the bootloader and kernel to flash as it explains in the above guide...
Or maybe someone has other advice?
Thanks for your help!!
Click to expand...
Click to collapse
All u need to do is download Odin 1.85 to ur PC, then go to http://techerrata.com/browse/twrp2/hercules and download the twrp 2.6.6.0.tar.md5 to ur PC, power ur phone on in download mode, the same screen will come up "firmware...issue", kids will do nothing for this and u will need to make sure kids is NOT RUNNING. Odin will not see the device if kies is running at all, now open the Odin program and connect the phone to PC using OEM factory USB cable, on Odin it should say "added", now click the box PDA, find the twrp file u downloaded b4, click on that file and then hit start in Odin, DO NOT CHECK ANYTHING ELSE... Let Odin do its thing and u will be fine, Odin will reboot the phone and u will now have twrp recovery, boot to recovery to finish rooting process
Sent from my SGH-T989 using xda premium
soupysoup said:
All u need to do is download Odin 1.85 to ur PC, then go to and download the twrp 2.6.6.0.tar.md5 to ur PC, power ur phone on in download mode, the same screen will come up "firmware...issue", kids will do nothing for this and u will need to make sure kids is NOT RUNNING. Odin will not see the device if kies is running at all, now open the Odin program and connect the phone to PC using OEM factory USB cable, on Odin it should say "added", now click the box PDA, find the twrp file u downloaded b4, click on that file and then hit start in Odin, DO NOT CHECK ANYTHING ELSE... Let Odin do its thing and u will be fine, Odin will reboot the phone and u will now have twrp recovery, boot to recovery to finish rooting process
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Went to the site you linked but there is no twrp 2.6.6.0.tar.md5
I downloaded openrecovcery-twrp-2.6.0.0-hercules.tar
However, in Odin it still wont flash the phone (I closed all Kies processes beforehand).
This is all that happens - just hangs here...
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
kj2112 said:
Forget the other thread you found. That's not our phone and anything there that you flash could brick your phone!!
Sent from my cell phone telephone
Click to expand...
Click to collapse
I wasnt going to use the files from the other thread, I just assumed I could try this procedure once I got the correct files for the SGH-T989D:
Recovering a soft bricked phone
1) Grab the Recovery Package, and you'll see a bunch of .tar files. Take a look at the names. You'll see CODE, MODEM, CSC and .PIT. Put each one in its place.
2) Turn off your phone. Enter Download mode by presing Volume Down + Home + Power button.
3) Plug in your phone. It will show you, in a yellow box in ODIN, ID:COMx (x being the number displayed, sometimes displays 7, sometimes displays 9)
Now here, take a breath
First try flashing WITHOUT the .PIT and re-partition. And only if it DOESN'T WORK OR FIX then you flash with the .PIT and Re-Partition ticked.
4) Once ready and done all your prayers, press Start. Wait patiently. It usually takes 5 minutes to flash.
Have you done everything correctly until now? Then...
Congratulations on recovering your phone!
You deserve some cake afterwards, and some rest
Now, if your problem is the NAND rw coruption, and wasn't fixed by the above fix, then follow these steps :
5) Download the Kernel. Flash it in PDA. Without ticking Re-Partitioning
6) Successful? Nice, hope is still present.
7) Flash the recovery package, following steps 1-4 This should fix your issue. If it does not, then :
WARNING : FLASHING A BOOTLOADER IS DANGEROUS. FLASH WITH EXTREME CAUTION.
8) Download the Bootloader. Flash it as PDA or Bootloader in ODIN. Without ticking Re-Partitioning
9) Flash the Kernel, as in step 5
10) Flash the recovery package, like in steps 1-4 And that will fix any of your issues
11) After you have recovered your phone, I advise you to have your phone completely up to date by browsing and downloading the firmware for your version through SamMobile!
fruzmatik said:
I wasnt going to use the files from the other thread, I just assumed I could try this procedure once I got the correct files for the SGH-T989D:
Recovering a soft bricked phone
1) Grab the Recovery Package, and you'll see a bunch of .tar files. Take a look at the names. You'll see CODE, MODEM, CSC and .PIT. Put each one in its place.
2) Turn off your phone. Enter Download mode by presing Volume Down + Home + Power button.
3) Plug in your phone. It will show you, in a yellow box in ODIN, ID:COMx (x being the number displayed, sometimes displays 7, sometimes displays 9)
Now here, take a breath
First try flashing WITHOUT the .PIT and re-partition. And only if it DOESN'T WORK OR FIX then you flash with the .PIT and Re-Partition ticked.
4) Once ready and done all your prayers, press Start. Wait patiently. It usually takes 5 minutes to flash.
Have you done everything correctly until now? Then...
Congratulations on recovering your phone!
You deserve some cake afterwards, and some rest
Now, if your problem is the NAND rw coruption, and wasn't fixed by the above fix, then follow these steps :
5) Download the Kernel. Flash it in PDA. Without ticking Re-Partitioning
6) Successful? Nice, hope is still present.
7) Flash the recovery package, following steps 1-4 This should fix your issue. If it does not, then :
WARNING : FLASHING A BOOTLOADER IS DANGEROUS. FLASH WITH EXTREME CAUTION.
8) Download the Bootloader. Flash it as PDA or Bootloader in ODIN. Without ticking Re-Partitioning
9) Flash the Kernel, as in step 5
10) Flash the recovery package, like in steps 1-4 And that will fix any of your issues
11) After you have recovered your phone, I advise you to have your phone completely up to date by browsing and downloading the firmware for your version through SamMobile!
Click to expand...
Click to collapse
Make sure u have the stock USB cord, and remove kies totally from ur PC, even if u think its not running it still may interfere with Odin, do not, do not touch anything on Odin besides PDA, and as long as u download the recovery tar file from the link I gave u, have the factory cable, and are in Odin it will work, try diff com ports on ur PC, mine likes com5 urs may be different, I had the exact same issue and freaked out like I assume u did and this was how I fixed it, u do not have a soft brick, u have a firmware malfunction, the guide for soft brick won't help u, try twrp 2.4, that's the one that fixed mine, if u need help pm me or hangouts an I'll walk u through it step by step...
Sent from my SGH-T989 using xda premium
soupysoup said:
Make sure u have the stock USB cord, and remove kies totally from ur PC, even if u think its not running it still may interfere with Odin, do not, do not touch anything on Odin besides PDA, and as long as u download the recovery tar file from the link I gave u, have the factory cable, and are in Odin it will work, try diff com ports on ur PC, mine likes com5 urs may be different, I had the exact same issue and freaked out like I assume u did and this was how I fixed it, u do not have a soft brick, u have a firmware malfunction, the guide for soft brick won't help u, try twrp 2.4, that's the one that fixed mine, if u need help pm me or hangouts an I'll walk u through it step by step...
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Thanks! Switched to a different computer and had no issues flashing.
fruzmatik said:
Thanks! Switched to a different computer and had no issues flashing.
Click to expand...
Click to collapse
Glad I could help, sometimes even if u think kies isn't affecting odin it just might be, happy I could be of assist, hit that thanks button if u like lol
Sent from my SGH-T989 using xda premium
I've been having issue with my Sprint Note 2 for a while. I've also posted this to Reddit and other parts of the forum but so far have gotten no way to fix my issue. Here's the link to Reddit: http://www.reddit.com/r/techsupport...nt_note_2_sphl900_bricked_after_attempted_43/
Sorry, I didn't want to type that all up again and having to deal with formatting and such.
Basically, the gist of it, from what I can gather is that I have accidentally loaded the 4.3 bootloader with KNOX and it is currently preventing me from doing anything productive (flashing CWMR, rooting, installing stock, etc). I read here on the forum that there were ways to do so, especially this post: http://forum.xda-developers.com/showthread.php?p=46861777
I was wondering if there were steps for the Sprint Note 2 SPH-L900?
Any help in debricking my phone is appreciated.
Try these steps.
1. Boot phone into Odin/download mode
2. Flash twrp or cwmr via Odin.
3. When it reboots pull battery and then boot into recovery.
4. Flash this http://forum.xda-developers.com/showthread.php?p=36388145 it is mc2 bootloader, firmware, radio, etc...
5. Reboot phone. Things get weird for a few mins but it will boot.
You are now Knox free once again but you are also bone stock.
Sent from my SPH-L900 using XDA Premium 4 mobile app
jlmancuso said:
Try these steps.
1. Boot phone into Odin/download mode
2. Flash twrp or cwmr via Odin.
3. When it reboots pull battery and then boot into recovery.
4. Flash this http://forum.xda-developers.com/showthread.php?p=36388145 it is mc2 bootloader, firmware, radio, etc...
5. Reboot phone. Things get weird for a few mins but it will boot.
You are now Knox free once again but you are also bone stock.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've tried that multiple times. The problem here is that I can't load CWMR or TWRP. At first, I assume that I'd have to root so I downloaded the CF auto root file and flash it using ODIN. Then I tried installing CWMR (after converting to .tar using Caboomi's tool here on the forum). It would reboot and I tried holding down volume up + power + home button but nothing would happen. I try combinations of that and still nothing. I flashed the 4.3 sboot.bin to get it back to stock Samsung bootloader then retried with CWMR without rooting first this time and it still doesn't work. ODIN would tell me that it succeeds but I can't enter Recovery no mater the combination of keys that I press. I'm assuming this has to do with Knox in which case I'd just have to wait for the official 4.3 firmware on SamMobile to flash it since stock 4.1.2 won't work.
QuantumInteger said:
I've tried that multiple times. The problem here is that I can't load CWMR or TWRP. At first, I assume that I'd have to root so I downloaded the CF auto root file and flash it using ODIN. Then I tried installing CWMR (after converting to .tar using Caboomi's tool here on the forum). It would reboot and I tried holding down volume up + power + home button but nothing would happen. I try combinations of that and still nothing. I flashed the 4.3 sboot.bin to get it back to stock Samsung bootloader then retried with CWMR without rooting first this time and it still doesn't work. ODIN would tell me that it succeeds but I can't enter Recovery no mater the combination of keys that I press. I'm assuming this has to do with Knox in which case I'd just have to wait for the official 4.3 firmware on SamMobile to flash it since stock 4.1.2 won't work.
Click to expand...
Click to collapse
After flashing cwm do battery pull...Don't let it auto-reboot.
Also try different version of Odin maybe
louforgiveno said:
After flashing cwm do battery pull...Don't let it auto-reboot.
Also try different version of Odin maybe
Click to expand...
Click to collapse
I tried 3.07, 3.09, and even barebone 1.85 that came with CF auto root. It doesn't work. I can't load recovery just fine (according to ODIN) but I can't get into Recovery.
Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone
Keithgordon said:
Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone
Click to expand...
Click to collapse
...My God..... What ever you did, it worked. Turns out, Caboomi's file didn't work too well. I couldn't get CWMR working at all even after converting to .tar. I used TWRP instead and it works. Problem was that it asked me for my password, which I don't know since I tried everything, so I had to resort to wiping everything. I installed the file jlmancuso suggested, loading it onto SD card then flashing using TWRP, and now my Samsung Note 2 is debricked.
Your file was a godsend. Thank you!
No recovery stuck on bootloop
im having the same issue could you post that dropbox link again
So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Keithgordon said:
Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone
Click to expand...
Click to collapse
rckingws6 said:
So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Click to expand...
Click to collapse
Yes, flash that file in Odin, it will downgrade you to MC2 with the MK4bootloader
Keithgordon said:
Yes, flash that file in Odin, it will downgrade you to MC2 with the MJA bootloader
Click to expand...
Click to collapse
MJA ? Isn't that an s4 bootloader?
louforgiveno said:
MJA ? Isn't that an s4 bootloader?
Click to expand...
Click to collapse
yep, sorry, I just woke up....I meant whatever version we are on with the note, what is it? MK4? I have both so I keep switching back and forth in the threads. Funny thing is, they are completely different, i will change that, thanks for pointing that out
my friend 's L900 bricked too ，but I cant download the file you provide , the error message is “Error (509) This account's public links are generating too much traffic and have been temporarily disabled”
may you provide another URL to download it or mail it to me ？ my email is [email protected] , thanks.
another question , how can i flash it into device with ODIN ？ from Pit ？ bootloader ？PDA ？PHONE ？ or others ？
Sent from my SPH-L900 using xda app-developers app
---------- Post added at 06:23 PM ---------- Previous post was at 06:14 PM ----------
Keithgordon said:
yep, sorry, I just woke up....I meant whatever version we are on with the note, what is it? MK4? I have both so I keep switching back and forth in the threads. Funny thing is, they are completely different, i will change that, thanks for pointing that out
Click to expand...
Click to collapse
my friend 's L900 bricked too ，but I cant download the file you provide , the error message is “Error (509) This account's public links are generating too much traffic and have been temporarily disabled”
may you provide another URL to download it or mail it to me ？ my email is [email protected] , thanks.
another question , how can i flash it into device with ODIN ？ from Pit ？ bootloader ？PDA ？PHONE ？ or others ？
Sent from my SPH-L900 using xda app-developers app
yea I still cant dowload it sorry for being a pest.
Keithgordon said:
Yes, flash that file in Odin, it will downgrade you to MC2 with the MK4bootloader
Click to expand...
Click to collapse
hello if you are online i need some help i dl the 4.3 note 2 update it has a different build than the one sprint has there are some features that are not on this build is there any way for me to get the ota from sprint
rckingws6 said:
yea I still cant dowload it sorry for being a pest.
Click to expand...
Click to collapse
rckingws6 said:
So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Click to expand...
Click to collapse
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.
QuantumInteger said:
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.
Click to expand...
Click to collapse
i need some help
yea i can get into twrp recovery now but my sdcard wont mount thats why im trying to use odin
QuantumInteger said:
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.
Click to expand...
Click to collapse
For those of you who have bricked Note 2s (SPH-L900), I'm going to drop a DropBox link here to a folder of ALL of the files that I used to unbrick my phone. I experimented with multiple methods (and several sleepless nights). Some of them will be useful to you, not all. I have the Android SDK and Caboomi's converter for .img to .tar. It doesn't work too well for CWMR just FYI. ODIN-OC will attempt to load stock MC2 onto your phone but it won't work if it's bricked. Arc Converter is a program I used to try convert the MK4 .zip file to .tar to try and flash an update using ODIN. It didn't work. The steps that I took to unbrick my phone will be posted after the link.
https://www.dropbox.com/sh/c2bfpfdf0qbs6bu/ZiNC-BF5kf
Be patient. Some of the files are still updating.
Steps:
1) Put your phone into Download mode by holding volume down + power + home button at bootup
2) Use ODIN (3.07 or 3.09) to load the 4.3_Unbrick.tar file. This will take a bit of time so be patient. Once the phone boots up again, you'll get past the boot screen that says "Samsung Galaxy Note II" and you'll get the Samsung logo with the spinning icon but it will loop. This is normal.
3) Next, power off (yank the battery and cable, leave battery out but plug the cable back in) and reboot into download.
4) Flash the TWRP .tar file (don't try converting the CWMR to .tar, it won't work) then reboot.
5) Hold volume up + power + home button (be patient here)
6) You should see the Team Win logo. You're now in recovery. The TWRP may ask you for the password. It is NOT the passcode to your lockscreen or your Google password. I have no idea what it is. At this point, you'd have to wipe your phone (internal only) if you want to flash the stock recovery.
7) Load the MC2 stock recovery file with counter reset onto a microSD card and mount it onto the phone (play around with TWRP, if it doesn't see the SD card the first time, restart or play with the mount function). Just be careful not to wipe your microSD card.
8) Flash the stock recovery (give it time) and it'll restart. You should be back at 4.1.2.
EXTRA STEPS
If you're still interested in 4.3, load the MK4 update onto the microSD card as well. BEFORE you go through the activation process for the 4.1.2 firmware at boot, boot into recovery. Flash the 4.3 update using stock recovery. This should put you onto 4.3 after the phone reboots. You should now have stock 4.3 (no root).
Sorry for all the download errors, I am uploading to my websight right now and as soon as it uploads, I will post the URL, it should download much faster too. I didnt realize so many people needed it
I follow this thread: http://forum.xda-developers.com/showthread.php?t=2549068
I put this file on the sd card debrick-SGH-I747U-CUEMJB3.img, made sure phone battery was charged up. Tried to enter download mode, it completely skipped it and phone is now running stock 4.3?? I try to enter recovery mode and it still just starts up with Stock 4.3.
So I assume it is running completely of the sd card. I can enter Stock Recovery but not sure what I do now. If i pull the card the phone is dead like before. Red light when plugged in, nothing happens with any button pushes.
I guess I am wondering what my next step is?
Thanks
Ruscicap said:
I follow this thread: http://forum.xda-developers.com/showthread.php?t=2549068
I put this file on the sd card debrick-SGH-I747U-CUEMJB3.img, made sure phone battery was charged up. Tried to enter download mode, it completely skipped it and phone is now running stock 4.3?? I try to enter recovery mode and it still just starts up with Stock 4.3.
So I assume it is running completely of the sd card. I can enter Stock Recovery but not sure what I do now. If i pull the card the phone is dead like before. Red light when plugged in, nothing happens with any button pushes.
I guess I am wondering what my next step is?
Thanks
Click to expand...
Click to collapse
The device is indeed booting off the SD card. However, if you can boot into system, you should also be able to boot into download and recovery modes using the 3-button combo. If you can get into download mode, you can try using Odin v 3.07 to flash the complete 4.3 stock image. Download the Odin flashable zip file from the link below to your computer. Extract the tar.md5 file and verify the MD5 to be sure it downloaded correctly.
http://www.androidfilehost.com/?fid=23329332407590581
Download Odin v3.07 and run Odin.exe for the flashing tool. With your debrick card, boot into download mode by pressing the Volume Down, Home and Power button. If you can't get into download mode with the 3-button combo, suggest you try a USB jig. Use Odin to flash the stock file to your phone. If the flashing is successful, the device should be able to boot normally after this without the debrick card.
Cool thanks Larry2999. I will have to go the USB jig route it won't go into recovery or download. I can only get into Stock recovery. Any specifics I need to know when getting a usb jig? Thanks again for you response. I am just glad it is working now. But probably don't want to run off SD forever.
Ruscicap said:
Cool thanks Larry2999. I will have to go the USB jig route it won't go into recovery or download. I can only get into Stock recovery. Any specifics I need to know when getting a usb jig? Thanks again for you response. I am just glad it is working now. But probably don't want to run off SD forever.
Click to expand...
Click to collapse
There is a thread somewhere on how to make a D-I-Y jig. You can, however, buy it cheaply online for about $3. In buying one, you'd only need to be sure it states that it works with the S3.
Looks like you are able to get into recovery now but you have stock, rather than custom, recovery. There is only one recovery partition and the default is stock, unless, you flash a custom recovery. If you had custom recovery, it would have been possible to flash a 4.3 stock restore zip via (custom) recovery. To flash custom recovery, however, you'd need Odin in download mode so we are back to the problem with getting into download mode.
Thanks Larry ordering jig tomorrow
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Larry2999 said:
There is a thread somewhere on how to make a D-I-Y jig. You can, however, buy it cheaply online for about $3. In buying one, you'd only need to be sure it states that it works with the S3.
Looks like you are able to get into recovery now but you have stock, rather than custom, recovery. There is only one recovery partition and the default is stock, unless, you flash a custom recovery. If you had custom recovery, it would have been possible to flash a 4.3 stock restore zip via (custom) recovery. To flash custom recovery, however, you'd need Odin in download mode so we are back to the problem with getting into download mode.
Click to expand...
Click to collapse
Do you suggest a reliable 4.3 stock to flash or install through ODIN? This is how I got to where I am, something screwed up trying to install stock 4.3 through ODIN.
Thanks again for your help. Jig should be here in a couple days.
Ruscicap said:
Do you suggest a reliable 4.3 stock to flash or install through ODIN? This is how I got to where I am, something screwed up trying to install stock 4.3 through ODIN.
Thanks again for your help. Jig should be here in a couple days.
Click to expand...
Click to collapse
Yes, the ONLY way to recover is to flash a complete 4.3 stock image. Are you sure you bricked in the first instance by flashing 4.3 via Odin? The only Odin compatible stock 4.3 file I'm aware of is the one in the link I forwarded earlier. This was only recently developed and appears to have been used by several people without problem. You may check to be sure you were not trying to flash a 4.1.1 file in error. Apologies if I sound like I'm second guessing you but flashing 4.1.1 via Odin usually results in the kind of hard brick you experienced.
The other alternative would be to flash custom recovery (TWRP or CWM) via Odin and then use custom recovery to flash a complete 4.3 stock image. You will find the instructions in the following thread ...
http://forum.xda-developers.com/showthread.php?t=2658486
Download the stock restore zip for your preferred custom recovery option to your PC and save to your phone's internal storage. If you want to use TWRP, you can find the Odin flashable file for TWRP via the link below ...
http://techerrata.com/file/twrp2/d2att/openrecovery-twrp-2.6.3.1-d2att.tar
If, however, you go the first option and flash the 4.3 file via Odin, be sure to use Odin v 3.07. You'll see the Odin flashable file and instructions on page 4 of the following thread ...
http://forum.xda-developers.com/showthread.php?t=2722660&page=4
or you can download directly from here ...
http://www.androidfilehost.com/?fid=23329332407590581
Thanks again. Not really sure what went wrong, tried to use odin to install 4.3 Stock from this thread. http://forum.xda-developers.com/showthread.php?t=2658486
I will try to follow your threads and get it right this time.
Ruscicap said:
Thanks again. Not really sure what went wrong, tried to use odin to install 4.3 Stock from this thread. http://forum.xda-developers.com/showthread.php?t=2658486
I will try to follow your threads and get it right this time.
Click to expand...
Click to collapse
The file from that thread is for (custom) recovery only. You can't flash zips via Odin so if you are using that file, you would need to first install custom recovery via Odin and then flash the zip via custom recovery.
Hey Larry, just wanted to say thanks. Phone is back working properly, 4.3 installed with no problem. Took me awhile never had the time. So fathers day was my chance to get this working. Flashed twrp and then the stock zip. Worked great.
Thanks again for all your help, I very much appreciate it.
Ruscicap said:
Hey Larry, just wanted to say thanks. Phone is back working properly, 4.3 installed with no problem. Took me awhile never had the time. So fathers day was my chance to get this working. Flashed twrp and then the stock zip. Worked great.
Thanks again for all your help, I very much appreciate it.
Click to expand...
Click to collapse
Glad to know it's working OK now. Kind regards
I accidentally softbricked my phone. I flashed TWRP and ever since then it's in a bootloop. Can't enter recovery, but CAN fortunately enter download. How can I get my phone running again? I figure I have to use Odin? Where to download the files to use in Odin and how to use Odin?
Thank you so much
Yes you will need odin or heimdall to get it working again. If your on a windows machine odin will be your beat choice. I use odin 1.85 but any version should work for this.
What you need.
1. A pc
2. Samsung usb drivers
3. Odin
4. Recovery file with the md5 extension
Install samsung drivers and odin program. Know where the recovery file is saved on your pc (usually in downloads).
Steps to flash revovery
1. On pc open odin make sure re-partition is NOT CHECKED!!
2. Click on the PDA button and select the recovery file you downloaded
3. With battery removed press and hold vol -, home key, power key
4. While still holding key insert battery (I find it easiest to do this with phone upside down)
5. It will boot into a menu vol + should be continue to download mode
6. Now place phone down on your desk or install battery cover (you dont want the battery to fall out during this)
7. Connect phone to pc and you should see in odin that it is connected
8. Click start and it will flash your recovery and reboot
Now you are back up and running. FYI twrp for our phone does not have a developer that has this device. So the current version is not functional and will end up causing the same issue.
I suggest sticking with philz till twrp is fixed. Also twrp does not work for tw 4.3 or any 4.4 rom (aosp or tw).
Sent from my GT-N7105 using XDA Premium 4 mobile app
Where can I get the recovery file? Is this file okay?
http://www.rwilco12.com/downloads.p...ote II (SPH-L900)/Stock ROMs/NE2/Original TAR
Thanks a lot for your help. I'm in way over my head
supaumar said:
Where can I get the recovery file? Is this file okay?
http://www.rwilco12.com/downloads.p...ote II (SPH-L900)/Stock ROMs/NE2/Original TAR
Thanks a lot for your help. I'm in way over my head
Click to expand...
Click to collapse
Use this file http://goo.im/devs/philz_touch/CWM_Advanced_Edition/l900/philz_touch_6.07.9-l900.tar.md5. The one you linked is a complete stock rom and all you need is a recovery.
Sent from my SPH-L900 using XDA Premium 4 mobile app