Root Gingerbread w/o download mode??? - Epic 4G Q&A, Help & Troubleshooting

So the other day my phone pretty much got submerged in water, luckily I let it dry out completly in a vacuum chamber and it still pretty much works except for a few keyboard keys, the volume up key, and MOST ANNOYINGLY the power button. Meaning that I can't turn on my phone once it's off, I've gotten lucky in being able to turn it on by plugging in and out the usb cable, but other than that I've been making sure that it dosen't run out of battery (n I've been wakign up the phone by slidingthe keyboard out)...
I've been reading around and it seems that I might be able to remap the power button to the camera key using buttonremapper or something like that, unfortunately the phone has to be rooted and after reading up on that it seems that a one click root would work since I'd never need the power button, however for gingerbread FC09 I can only find a way to root using odin, which apparently requires download mode, which I can't access since the power button dosen't work
so my question is does anyone know of a way to root gingerbread FC09 without the need of a power button, either something similar to one click roots or odin without accessing download mode??
Thanks, any help is much appreciated

There was another thread. Where they was saying you can type in reboot download. In the terminal emulator to get into dl mode. Also if you have the tools. Take it apart clean the board with rubbing alcohol and a tooth brush. It could fix. All your keys. Just make sure you let the alcohol dry up before putting it back together. I restored an e4gt with that method. Hope this helps. I know that wasn't the answer to your question but its an alternative.
Sent from my SPH-D700 using xda premium

notsosmrtgeek said:
There was another thread. Where they was saying you can type in reboot download. In the terminal emulator to get into dl mode. Also if you have the tools. Take it apart clean the board with rubbing alcohol and a tooth brush. It could fix. All your keys. Just make sure you let the alcohol dry up before putting it back together. I restored an e4gt with that method. Hope this helps. I know that wasn't the answer to your question but its an alternative.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
You need root access to do it with the terminal emulator........ so that's a no go... really if you are on gingerbread with no way into download mode, I really think you are stuck... there is no other way that I can think of other than maybe a jig to jump you into download mode.............
Sent from my SPH-D700 using Xparent ICS Blue Tapatalk 2

Is adb an option
Sent from my SPH-D710 using xda premium

gtuansdiamm said:
Is adb an option
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I had heard of that but didn't try it yet since I couldn't find any clear article on how to root just using that method...
I'll download the drivers and program and try it when I can, but I'm pretty sure I can access adb as it's android's development tool and only requires usb debugging to be on, and everything so far has worked as long as it dosen't require the power button...how would I root using adb?
@notsosmrtgeek: thanks for the advice, however I already did that the first time after it got wet and before drying it out...I think it was inevitable that some of the microcircuitry got messed up...weird is volume up dosen't work, but if I say anything into the phone (voice search) then it raises the volume up to the max level, lol

gtuansdiamm said:
Is adb an option
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
so I can get adb up...could you explain how to root using only adb or direct me to a thread that does so.
Thanks

3rd sticky in Dev sec

adb reboot download
Sent from my Galaxy Nexus using Tapatalk 2

it's hopeless :/
MДЯCЦSДИT said:
adb reboot download
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
so I did adb reboot download, and now when I boot up it always goes to the standard android system recovery 3e, I can scroll the options but it dosen't let me select any option, i tried the home key and my power button dosen't work...and so the only thing I can do is pull out the battery and try again, but of course the same thing happens...
I decided to get the dongle to force download mode, and maybe and try rebooting the phone through odin or flashing a stock rom (even though it has stock but just to get the phone to reboot properly) and I can get to download mode and odin does recognize it, but it always says write FAIL after boot.bin, i tried different usb cords/ports, reinstalling drivers, flashing different roms in case the file was corrupt, but no luck always fail
also since odin recognizes the device, i though maybe i could do adb reboot, but unfortunately the android debug bridge dosen't recognize my phone
does anyone have any suggestions or should I just give up, and settle that this phone is bricked...

Related

[Q] Help!!!!!

I formatted the /system partition by mistake and now my SGS II is dead. Can anybody help me???
neovitwin said:
I formatted the /system partition by mistake and now my SGS II is dead. Can anybody help me???
Click to expand...
Click to collapse
The system partition is written to whenever you flash a rom. I would suggest following the root procedures again, as this should rewrite the system partition. I would wait for some second opinions though.
Edit: I think maybe the root thing was just the rooted kernel. Someone will probably post a Backup file soon and you may have luck with that.
The thing is that it is not booting at all and the only thing that the computer recognizes is a QHSUSB_DLOAD something.
Have you tried to use odin yet? Just to see if it shows a connection? I don't know if you know this way to get to download mode, but hold vol up + vol down when odin is running on your computer and your phone is connected to the computer. It should automagically go to download mode...unless you deleted it when you formatted system.
I tried that. The only thing I did before restarting was "format /system" I do not know if that has something to do with the download mode
I found this for the driver...
http://forum.xda-developers.com/attachment.php?attachmentid=631288&d=1308601930
I don't know what to do with it from there though.
Did you flash clockwork recovery yet?
Sent from my SGH-T989 using xda premium
Don't panic it can be fixed
Sent from my SGH-T989 using xda premium
How? I flashed. that is how I got to the format /system option. Any suggestion. The driver did not help and I am running out of ideas
If you flashed cwr, with the phone off hold volume up and down at the same time and press power. It should boot to a blue cwr screen. If that happens your in great shape. then all you need is a backup image. which I can upload after work
Sent from my SGH-T989 using xda premium
No worries your phone is not dead, you need to use Odin to reflash. Follow the instructions or google it on youtube how to get in download mode and use odin. Search Samsung Galaxy S the procedure is same.
Sent from my SGH-T989 using XDA App
quest4fire said:
No worries your phone is not dead, you need to use Odin to reflash. Follow the instructions or google it on youtube how to get in download mode and use odin. Search Samsung Galaxy S the procedure is same.
Sent from my SGH-T989 using XDA App
Click to expand...
Click to collapse
He can't get into download mode...
You can always get in download mode there are different ways. He has a soft brick that can be fixed. Try pulling battery then plug it in then hold both volume buttons with TWO fingers and turn phone on and when Samsung logo pops up release power button but still hold on the volume buttons then download mode will kick in.
Sent from my SGH-T989 using XDA App
If he holds volume up and down with the power off and plugs in USB in his computer it does nothing?
Sent from my SGH-T989 using xda premium
pb05life said:
If he holds volume up and down with the power off and plugs in USB in his computer it does nothing?
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
That's what he said. I already gave him these instructions.
Sometimes on my Vibrant I had to pull out the SIM and sdcard, so I guess that's another option.
I might need to be in front of my computer to help then not driving 80mph on the highway. Lol
But i'm pretty sure it can be fixed
Sent from my SGH-T989 using xda premium
Thanks all for your help. The phone is not responding to anything button related at least not all what i tried (And you guys mentioned).
Here's something else to try, since I don't think my instructions were clear.
Disconnect your phone from the computer.
Take out SIM.
Start Odin on the computer.
PRESS AND HOLD vol up and vol down.
WHILE HOLDING connect the phone to the computer.
This SHOULD do something, like show a yellow com port connection in Odin.
Disclaimer: I'm not yelling at you, just trying to highlight the important parts. I don't know your level of experience either, so if you feel I'm talking down to you, DON"T!
JAJAJAJA. not a problem. It shows the yellow port connection text box. but is not connecting to the phone it is waiting forever on SetupConnection. However, nothing is happening in the phone. the screen is still black.
neovitwin said:
JAJAJAJA. not a problem. It shows the yellow port connection text box. but is not connecting to the phone it is waiting forever on SetupConnection. However, nothing is happening in the phone. the screen is still black.
Click to expand...
Click to collapse
again not to make you sound dumb but you have:
ODIN V1.8.4?
Samsung Kies installed but closed?
Pulled battery out?
put battery back in?
run odin v1.8.4?
hold both Vol up + Vol down, and plug the USB cable in?
Do you have another computer and usb cable you can try if the above does not get you into download mode. it could be a driver issue on your computer
I am making a backup now for you to restore if we can get you in download mode to flash cwr

please help

i recently got tmobile galaxy s2 with cracked scree. so i replaced the screen and when i turn it on. it reboots then after 1 min it does the same thing over and over. idk why that's happening. any idea how to fix the problem. help would be greatly appreciated. thanks
I would recommend you call and get another if you just got our. I really don't suggest the following return it! I am not responsible for what you do with your phone. If it is bad hardware you want a new one.
You just need download mode hold Vol buttons on boot and plug in USB as it boots but before samsung logo goes away (may take a few good tries there is a real trick to it sometimes).
If that works follow Odin flash directions for rooting the phone. I used theunlckr guide myself (easy find via Google).
If you can get download mode and flash a recovery package to it you may get it running. may just be really bad flash on their end.
I HIGHLY SUGGEST YOU REALLY TRY RETURNING IT AGAIN IF YOU JUST GOT IT. USE THIS ONLY AS A LAST RESORT. I AM NOT RESPONSIBLE FOR YOUR ACTIONS WITH YOUR PHONE.
Sent from my SGH-T989 using Xparent Green Tapatalk
RealPariah said:
I would recommend you call and get another if you just got our. I really don't suggest the following return it! I am not responsible for what you do with your phone. If it is bad hardware you want a new one.
You just need download mode hold Vol buttons on boot and plug in USB as it boots but before samsung logo goes away (may take a few good tries there is a real trick to it sometimes).
If that works follow Odin flash directions for rooting the phone. I used theunlckr guide myself (easy find via Google).
If you can get download mode and flash a recovery package to it you may get it running. may just be really bad flash on their end.
I HIGHLY SUGGEST YOU REALLY TRY RETURNING IT AGAIN IF YOU JUST GOT IT. USE THIS ONLY AS A LAST RESORT. I AM NOT RESPONSIBLE FOR YOUR ACTIONS WITH YOUR PHONE.
Sent from my SGH-T989 using Xparent Green Tapatalk
Click to expand...
Click to collapse
Agreed. You could flash a different ROM entirely
Sent from my SGH-T989 using XDA
is that possible for my phone because my phone isnt rooted. and is it possible to get a diffrent rom
btw can you please put a link on how to root a rom with the download mode vol up and plug the usb
josephgalaxy said:
btw can you please put a link on how to root a rom with the download mode vol up and plug the usb
Click to expand...
Click to collapse
Here's a link
tcboo said:
Here's a link
Click to expand...
Click to collapse
AAAAAH hahahaha ! thats classic Loving that good job tc!
tcboo said:
Here's a link
Click to expand...
Click to collapse
Lol.
Did the phone work fine before you swapped the screen?
Either, you shorted something during the screen swap.
Sent from my SAMSUNG-SGH-T989 using xda premium
or this also happens with non oem parts. Where did you get the screen? Either way I'd take it to a cell phone repair store.
Sent from my SAMSUNG-SGH-T989 using xda premium
Thanks guys. I got my screen at eBay . And ya it was working fine before the screen cracked and nothin would turn on exept for the keypad.

How to recover from Brick

Simple write up for now...simplicity is the key here....
and let me explain first what I did...flashed a rom using rogue recovery on Caulkins ICS 1.6 I think...
things I tried and did not work...
*zimage script for windows copied went through...but did not work considering system was M.I.A. and SU wasnt present to finish the job...
*hold down button does not bring you into download mode as expected...
HOWEVER...if it seems all you can manage to do is boot into the rogue recovery and the sd cards and backups are all whacky...then you my friend still have a option....use ADB COMMANDS while connected in recovery mode...
adb reboot download
and your phone should now be in download mode...
p.s.-if this has been covered already please disregard and be on your way i suppose...otherwise if this has helped you please hit the thanks button XD
Don't think this will work from a hard brick.
BUT
Even though you can get into download mode, doesn't mean anything you try to Odin will work. It'll stall at data.img or something similar.
Sent from my SPH-D710 using xda premium
bigpeng said:
Don't think this will work from a hard brick.
BUT
Even though you can get into download mode, doesn't mean anything you try to Odin will work. It'll stall at data.img or something similar.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
You beat me to it.
Sent from my SPH-D710 using Tapatalk 2
Here is an interesting question for you guys.
I can't connect my phone using the usb port for anything in the world. It will charge but usb wont connect the phone to computer at all. Any ideas?
11secEVO said:
Here is an interesting question for you guys.
I can't connect my phone using the usb port for anything in the world. It will charge but usb wont connect the phone to computer at all. Any ideas?
Click to expand...
Click to collapse
Use the back usb ports. not your front ones
Shoulon said:
Use the back usb ports. not your front ones
Click to expand...
Click to collapse
I tried every port on the computer. I even tried a laptop.
11secEVO said:
Here is an interesting question for you guys.
I can't connect my phone using the usb port for anything in the world. It will charge but usb wont connect the phone to computer at all. Any ideas?
Click to expand...
Click to collapse
11secEVO said:
I tried every port on the computer. I even tried a laptop.
Click to expand...
Click to collapse
You try enabling USB debugging in developer options?
If that don't work, try:
https://play.google.com/store/apps/details?id=in.zatta.USB_switch
Sent from my SPH-D710 using xda premium
why is this in development? and how is that different than pulling the battery and reinserting it and holding vol down + power?
this is in the stickies and super basic knowedge...
mmk
everyone must have MISTAKEN ME...
I COULD NOT...to save my life get into download mode via holding vol down button...nor would it boot...
nor am I a noob at any of this...
there was nothing on the phone but a borked recovery...
the one from ics roms (rogue I think) ...I did the stupid and flashed a rom while using rogue...
and wiped...my phone completely bricked...
no download no nothing...
took me a hour...but then I realized as long as there is recovery I should still have adb.
and yes it actually took in odin...my phone is been running perfect stock for last couple of days now...
downloaded modem and data.img with no problems...
sorry I wasn't quick on the reply but guys come on...
I know the sticky is there...this was a complete different situation than anything I seen in the sticky...
and also putting anything on SD card and trying to either flash or restore would not work seeming the sd cards in the recovery are backwards...emmc reads sd card...and vice-versa...
so thanks for the know-it-all guys who didn't read saying I COULDNT GET INTO DOWNLOAD MODE and I wouldnt of posted it if it didn't work....
11secEVO said:
I tried every port on the computer. I even tried a laptop.
Click to expand...
Click to collapse
like stated above go to settings< applications< development< usb debugging check on
if that still doesn't work...then I suggest checking to see if the proper drivers are installed.
rrockstar.kidd said:
everyone must have MISTAKEN ME...
I COULD NOT...to save my life get into download mode via holding vol down button...nor would it boot...
nor am I a noob at any of this...
there was nothing on the phone but a borked recovery...
the one from ics roms (rogue I think) ...I did the stupid and flashed a rom while using rogue...
and wiped...my phone completely bricked...
no download no nothing...
took me a hour...but then I realized as long as there is recovery I should still have adb.
and yes it actually took in odin...my phone is been running perfect stock for last couple of days now...
downloaded modem and data.img with no problems...
sorry I wasn't quick on the reply but guys come on...
I know the sticky is there...this was a complete different situation than anything I seen in the sticky...
and also putting anything on SD card and trying to either flash or restore would not work seeming the sd cards in the recovery are backwards...emmc reads sd card...and vice-versa...
so thanks for the know-it-all guys who didn't read saying I COULDNT GET INTO DOWNLOAD MODE and I wouldnt of posted it if it didn't work....
Click to expand...
Click to collapse
this still doesnt make sense.. either your button is broken, or you werent doing it right..
also, if you can adb into recovery there are hundreds of ways to fix that problem, you are nowhere near bricked. you just have a messed up flash. if your sds are swapped and you cant get to them and flash, thats an error with the recovery, but you can still adb in and copy them to a place you can flash from. you can even flash directly from adb.. but nothing you did from add, nor recovery could restore your download mode. if you lose that you need a JTAG.

Broken powerbutton, need to unroot and re-lock

Hey all,
My power button stopped working and I, thinking it was a software issue, pulled the battery and found out I could not restart. I need to get into recovery or at least turn on the phone to unroot and relock it before heading to verizon.
So far I have had no luck turning the phone back on. I'm sure there is a way to do this... any help is greatly appreciated.
You can use a jig to go into the download mode
And flash a rom
Sent from my GT-N7000 using xda premium
Is the jig the only option? I don't currently have a jig so if that's the only thing I can do I will need to order one ASAP so I can get this thing working.
danteoo7 said:
You can use a jig to go into the download mode
And flash a rom
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
evahnyird said:
Hey all,
My power button stopped working and I, thinking it was a software issue, pulled the battery and found out I could not restart. I need to get into recovery or at least turn on the phone to unroot and relock it before heading to verizon.
So far I have had no luck turning the phone back on. I'm sure there is a way to do this... any help is greatly appreciated.
Click to expand...
Click to collapse
you might want to check this out..
http://www.ifixit.com/Answers/View/84579/Power+Button+stopped+responding.+Phone+will+not+turn+on.
Try to start it via adb, usb connect it, then type in adb devices, and then just adb reboot bootloader
Sent from my Sensation using xda premium
DesperadoX93 said:
Try to start it via adb, usb connect it, then type in adb devices, and then just adb reboot bootloader
Sent from my Sensation using xda premium
Click to expand...
Click to collapse
Are you talking about in command prompt? I tried
Code:
adb-windows.exe devices
which returns " list of devices attached" with none listed.
If you can't get it to turn on they won't be able to either it will probably be fine.
Sent from my Galaxy Nexus using xda premium
Beamer9408 said:
If you can't get it to turn on they won't be able to either it will probably be fine.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
The issue is that the phone is in no way broken other than the power button. I'll have to take it in and hope for the best if I can't figure something out, but I'd really like the peace of mind knowing that all of my files and data aren't stuck on it (I'd also like to get my lastest nandroid or do another one).
I saw a timing trick on http://forum.xda-developers.com/showthread.php?t=1731128 that is supposed to allow the device to boot, but I haven't gotten it to work yet.
Google wugfresh nexus root toolkit
It has a simple one click fix for flashing stock and unrooting when the device can't boot up
Or you can use something like glados cp to relock the boot loader as your rooted then delete the superuser apk in system app
Sent from my Galaxy Nexus using xda premium
I've gotten the phone into download mode using a jig, but it still doesn't seem to be recognized by the computer. Is this an issue of re-installing the Samsung drivers/adb or a limitation of download mode? Do I need to use odin?
evahnyird said:
I've gotten the phone into download mode using a jig, but it still doesn't seem to be recognized by the computer. Is this an issue of re-installing the Samsung drivers/adb or a limitation of download mode? Do I need to use odin?
Click to expand...
Click to collapse
Are you sure you have ADB configured properly for the device to be picked up via command line? USB debugging would have to of been turned on for ADB commands..
I'm almost positive USB debugging is on, especially since I think it's a default option in kang. I can get into download mode but not anything else. At this point I think I'm going to have to use ODIN and lose my data. Stupid power button...
Try removing the battery then tapping the metal battery pins against the phone pins repeatedly.
A friend of mine used to have to do this to get his nexus one to boot.. it can be a bit temperamental but does work.
evahnyird said:
I've gotten the phone into download mode using a jig, but it still doesn't seem to be recognized by the computer. Is this an issue of re-installing the Samsung drivers/adb or a limitation of download mode? Do I need to use odin?
Click to expand...
Click to collapse
Make sure you have the correct drivers installed. From download mode you will have to use Odin.
Note: since the device won't actually boot into Android, you don't have to worry about USB Debugging.
Note x2: the only driver that would let my device be recognized was the PDA Net driver, you may want to give it a try.
Sent from my Galaxy Nexus using Tapatalk 2
Well guys, thanks for all the suggestions. In the end I could get nothing to work other than Download mode with a jig and Odin to restore to stock. I lost everything on the phone, including my nandroid backups (should have copied them over more recently ...), but was able to re-lock the bootloader with nexus root toolkit after using Odin to flash the stock rom. ]
Moral of the story, if you lose your power button, you are screwed.
DesperadoX93 said:
Try to start it via adb, usb connect it, then type in adb devices, and then just adb reboot bootloader
Sent from my Sensation using xda premium
Click to expand...
Click to collapse
Unfortunately you can't use adb to turn on a powered off device; not saying that wouldn't be awesome.

[Q] [Cry] Galaxy Nexus bricked. (Dead fastboot, dead 3e recovery, only safemode

Searched all over and google yada yada yada. So i end up opening a thread here.
Hello guys/babes/kids/oldfags/ifags in disguise . I have a galaxy nexus here that will only boot into
-download mode,
- fastboot (not working at all, pc wont detect its fastboot and buttons all dead when in recovey/fastboot)
- safe mode - will boot into safe mode if i did combo buttons when attached to charger/pc
The story :
When i booted it from batt pull via only power button press, it will go into download mode straight and if i power off or factory reset in safe mode, it will reboot back into safe mode.
I cant flash anything since fastboot is broken. Ive tried Odin back to factory image of Galaxy Nexus GSM ICS and Jellybean but the prob isnt solved and fastboot is still broken. Tried repartition and bootloader update in ODIN yet still fail. And after every successful flash of repackaged stock, it will directly boot into safe mode (for both ICS and JB factory image). Why i didnt flash using fastboot? Fastboot is broken that is. Lets continue...
Other hardwares are still fine as in safe boot, ive tested all the buttons, display, calls, speaker etc. This is fastboot relate i believe as no matter what pc ive tried and all types of gnex drivers i tried. It wont even fart when connecting to pc(win7 x86). ADB works fine though when i booted into the safe mode. Im able to do adb stuffs but whenever i query it to reboot to fastboot or recovery, a dead end again. OMAPflash the tuna edition for omap4460? Tried yet still the same.
Additional facts : The phone was not unlocked and tempered by any way before the prob happened but now the bootloader is unlocked after i flashed the repackaged ODIN (chainfire posted it)
So XDA Gnex'ers, LET THE HUNT BEGIN!
Sent from my GT-I9100 using xda premium
Reserved for updates
Have you stumbled across this yet?
http://forum.gsmhosting.com/vbb/f63...-i9100g-via-usb-cable-freeeeeeeeeeee-1465412/
iowabowtech said:
Have you stumbled across this yet?
http://forum.gsmhosting.com/vbb/f63...-i9100g-via-usb-cable-freeeeeeeeeeee-1465412/
Click to expand...
Click to collapse
thats omapflash, to be more precise.
op, try that. also, might want to read something more, efrant has a link on it on one of his threads.
sent from my i9250
bk201doesntexist said:
thats omapflash, to be more precise.
op, try that. also, might want to read something more, efrant has a link on it on one of his threads.
sent from my i9250
Click to expand...
Click to collapse
Yup, tried it but its still the same. Fastboot still dosent work and relashing packaged factory images in odin dosent fix the fastboot
Sent from my GT-I9100 using xda premium
Saw a Jtag service nearby and thinking of sending it in. Its roughly after conversion from RM(Malaysian Ringgit) around USD$90. Possible recovery from the issue?
Sent from my GT-I9100 using xda premium
does it try to create an error log? or are you able to pull bug report?
it boots into download mode and safemode so, there's hope.
override182 said:
Searched all over and google yada yada yada. So i end up opening a thread here.
Hello guys/babes/kids/oldfags/ifags in disguise . I have a galaxy nexus here that will only boot into
-download mode,
- fastboot (not working at all, pc wont detect its fastboot and buttons all dead when in recovey/fastboot)
- safe mode - will boot into safe mode if i did combo buttons when attached to charger/pc
The story :
When i booted it from batt pull via only power button press, it will go into download mode straight and if i power off or factory reset in safe mode, it will reboot back into safe mode.
I cant flash anything since fastboot is broken. Ive tried Odin back to factory image of Galaxy Nexus GSM ICS and Jellybean but the prob isnt solved and fastboot is still broken. Tried repartition and bootloader update in ODIN yet still fail. And after every successful flash of repackaged stock, it will directly boot into safe mode (for both ICS and JB factory image). Why i didnt flash using fastboot? Fastboot is broken that is. Lets continue...
Other hardwares are still fine as in safe boot, ive tested all the buttons, display, calls, speaker etc. This is fastboot relate i believe as no matter what pc ive tried and all types of gnex drivers i tried. It wont even fart when connecting to pc(win7 x86). ADB works fine though when i booted into the safe mode. Im able to do adb stuffs but whenever i query it to reboot to fastboot or recovery, a dead end again. OMAPflash the tuna edition for omap4460? Tried yet still the same.
Additional facts : The phone was not unlocked and tempered by any way before the prob happened but now the bootloader is unlocked after i flashed the repackaged ODIN (chainfire posted it)
So XDA Gnex'ers, LET THE HUNT BEGIN!
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
First of all, bricked mean there is nothing beside a black screen. Nowaday device are hard to brick. second, One does not simply flash a gnex with odin. It's simply a big wtf that is shining through my head. 3rd, if fastboot is not working, it's because it need a special driver that i suppose you didnt install. If you can boot your phone in fastboot but can connect to it, it's because you have a broken USB port, which is not the case since you can access adb. 4th, i'm still trying to know how you achieved this. It look to me you were following some instruction and it either ended, tl;dr i will skip a few step, hope it will work which didnt or you missed electricity. Install Kies, get your phone in download and recover your phone from it. Never attempt again to play on custom rom. Man, how can someone derp a galaxy nexus, it is like the easiest device to work with.
chadouming said:
First of all, bricked mean there is nothing beside a black screen. Nowaday device are hard to brick. second, One does not simply flash a gnex with odin. It's simply a big wtf that is shining through my head. 3rd, if fastboot is not working, it's because it need a special driver that i suppose you didnt install. If you can boot your phone in fastboot but can connect to it, it's because you have a broken USB port, which is not the case since you can access adb. 4th, i'm still trying to know how you achieved this. It look to me you were following some instruction and it either ended, tl;dr i will skip a few step, hope it will work which didnt or you missed electricity. Install Kies, get your phone in download and recover your phone from it. Never attempt again to play on custom rom. Man, how can someone derp a galaxy nexus, it is like the easiest device to work with.
Click to expand...
Click to collapse
Thx for the reply.
Some clarification here, im not the owner of this phone. Im using 9100 and im just helping a friend to recovery. Ive tried few pcs and it wont even fart when i plugged in during fastboot or recovery (i read someone that in recovery you can do some commands) but the pc(s) wont even detect a hardware being plugged in.
Plus, in fastboot, i cant press any of the hardware keys. No vol up or vol down and the power button dosent work in recovery. I only got to the 3e stock recovery via 'adb reboot recovery' during in fast mode where it booted into the relaxing chillin android with the triangle + red exclamation mark on its tummy. Pressed all buttons and it went to the 3e recovery.
At the 3e, only power button works. I cant toggle a bit using the vol keys. Note that the vol buttons work to boot the phone into fastboot and download mode and also during safe mode, all the keys works flawlessly.
So, i tried the odin method to recovery this living Gnex but with a faulty heart and kidney but it will still boot to safe mode regardless of ICS or Jellybean.
How did this happen?
I have no idea. The owner of the phone claimed that he has never rooted or tempered it in any way. Plus it was still on ICS when i first got the phone (all data was still intact but it was in safe mode at that time).
Regarding drivers, ive attempted many pcs with almost every drivers available. Shall i list em here:
- KIES
- Naked Nexus drivers
- PDA.net
- the 'official' gnex verizon driver set which is said working on GSM devices etc.
Tried those and adb+download mode works fine. Pcs detect em and tried to install the hardware n search for the drivers but not in fastboot. Its just dead.
killersloth said:
does it try to create an error log? or are you able to pull bug report?
it boots into download mode and safemode so, there's hope.
Click to expand...
Click to collapse
Adb works fine so im able to pull anything when its booted. Im not sure if we can pull anything in download mode. Adb/fastboot didnt work in download mode. Am i correct? Mind to share some light here on this. And in fastboot, none. No vol keys to operate and the 4-5 pc ive tried wont even fart a sound or hint anything saying a hardware connected. Its like its a dead circuit plugged only in fastboot.
This is quite a super rare case here. Most of the dead gnex i found on the next and also in XDA has a working fastboot that only needs drivers to make it working but on this unit, even the vol keys is dead. Awkwarddddd
Sent from my GT-I9100 using xda premium
override182 said:
Thx for the reply.
Some clarification here, im not the owner of this phone. Im using 9100 and im just helping a friend to recovery. Ive tried few pcs and it wont even fart when i plugged in during fastboot or recovery (i read someone that in recovery you can do some commands) but the pc(s) wont even detect a hardware being plugged in.
Plus, in fastboot, i cant press any of the hardware keys. No vol up or vol down and the power button dosent work in recovery. I only got to the 3e stock recovery via 'adb reboot recovery' during in fast mode where it booted into the relaxing chillin android with the triangle + red exclamation mark on its tummy. Pressed all buttons and it went to the 3e recovery.
At the 3e, only power button works. I cant toggle a bit using the vol keys. Note that the vol buttons work to boot the phone into fastboot and download mode and also during safe mode, all the keys works flawlessly.
So, i tried the odin method to recovery this living Gnex but with a faulty heart and kidney but it will still boot to safe mode regardless of ICS or Jellybean.
How did this happen?
I have no idea. The owner of the phone claimed that he has never rooted or tempered it in any way. Plus it was still on ICS when i first got the phone (all data was still intact but it was in safe mode at that time).
Regarding drivers, ive attempted many pcs with almost every drivers available. Shall i list em here:
- KIES
- Naked Nexus drivers
- PDA.net
- the 'official' gnex verizon driver set which is said working on GSM devices etc.
Tried those and adb+download mode works fine. Pcs detect em and tried to install the hardware n search for the drivers but not in fastboot. Its just dead.
Adb works fine so im able to pull anything when its booted. Im not sure if we can pull anything in download mode. Adb/fastboot didnt work in download mode. Am i correct? Mind to share some light here on this. And in fastboot, none. No vol keys to operate and the 4-5 pc ive tried wont even fart a sound or hint anything saying a hardware connected. Its like its a dead circuit plugged only in fastboot.
This is quite a super rare case here. Most of the dead gnex i found on the next and also in XDA has a working fastboot that only needs drivers to make it working but on this unit, even the vol keys is dead. Awkwarddddd
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Great to know you are not the one who did that . So if i understand correctly, you say download mode work ? If yes, flash another stock rom from chainfire using odin. No one wan't to flash with odin, but if fastboot is not working, you shall at least try it. Also, when you are putting the phone in download mode and connecting it to kies, it should detect it has to be restored. i would say the main reason for it to not work is that android debugging is not ticked in developer options. But that would be strange that adb work on safe mode. There is probably a way to that with adb but you will have to google it. Tell your friend to follow instruction next time. And ffs, do not use odin ! (Little idea too, try to get in fastboot not connected on PC and wait a few minutes then see if you can move with the volume button, then try to connect it on pc)
chadouming said:
Great to know you are not the one who did that . So if i understand correctly, you say download mode work ? If yes, flash another stock rom from chainfire using odin. No one wan't to flash with odin, but if fastboot is not working, you shall at least try it.
Click to expand...
Click to collapse
Yes i have already did that few times. Few times of ICS factory image and few with JB. All are repacked version provided by chainfire. Its the full package not the software only with stripped bootloader n recovery. Its still the same
Sent from my GT-I9100 using xda premium
http://forum.xda-developers.com/showthread.php?t=1392310
download and install toolkit from that thread ^^^^^^
uninstall all gnex drivers you installed
reboot pc, open gnex toolkit, with phone unplugged install the drivers
fastboot should work
killersloth said:
http://forum.xda-developers.com/showthread.php?t=1392310
download and install toolkit from that thread ^^^^^^
uninstall all gnex drivers you installed
reboot pc, open gnex toolkit, with phone unplugged install the drivers
fastboot should work
Click to expand...
Click to collapse
Thx, tried it on a few pcs but it still wont work. Even the volkeys in fastboot didnt work :8
Sent from my GT-I9100 using xda premium
override182 said:
Thx, tried it on a few pcs but it still wont work. Even the volkeys in fastboot didnt work :8
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
did you try flashing google's factory image in odin??
my fastboot once was unresponsive, but rebooting into it fixed it
from safemode, if you adb reboot bootloader it is unresponsive?
killersloth said:
did you try flashing google's factory image in odin??
my fastboot once was unresponsive, but rebooting into it fixed it
from safemode, if you adb reboot bootloader it is unresponsive?
Click to expand...
Click to collapse
Yes i had, still boots to safe mode and the fastboot is still dead. Yes ive tried adb reboot bootloader but its dead in fastboot, again.
Sent from my GT-I9100 using xda premium
only suggestion left is to just boot into fastboot, leave it alone for awhile (5-10 mins), then try and plug it in and mess with it.
Try doing the whole driver thing mentioned above but instead of flashing a Google image just do the boot loader portion, what settings are you using to flash in Odin?
Sparx639
killersloth said:
only suggestion left is to just boot into fastboot, leave it alone for awhile (5-10 mins), then try and plug it in and mess with it.
Click to expand...
Click to collapse
Tried yesterday, nothing happened
Sparx639 said:
Try doing the whole driver thing mentioned above but instead of flashing a Google image just do the boot loader portion, what settings are you using to flash in Odin?
Sparx639
Click to expand...
Click to collapse
First tried pda only with auto reboot, no gooding. The i tried with booloader, no good. Then bootloader only, still no good. Then i tested all including pit file, still no good.
Update, sent in for Jtagging few min ago. The phone is not with me now and ill get it back in 3days working or not. I shall report in back after 3 days. Thanks to all by giving suggestion and ideas. See u guys again in 3 days
Sent from my GT-I9100 using xda premium
chadouming said:
Also, when you are putting the phone in download mode and connecting it to kies, it should detect it has to be restored. i would say the main reason for it to not work is that android debugging is not ticked in developer options.
Click to expand...
Click to collapse
adb does not work in download mode/bootloader. adb only works when adbd (adb service) is started, and that happens in android boot process. it means android debug bridge.
sent from my i9250
Sorry for the long delay to anyone waiting for the answer/status.
Jtag cant fix it. Returned the device to a friend. Prolly a mobo replacement is the solution but its damn pricy here in Malaysia. It costs 80% of the price to get a new Gnex.
Hell yeah and thx to everyone supporting this.
Sent from my GT-I9100 using xda premium

Categories

Resources