Searched all over and google yada yada yada. So i end up opening a thread here.
Hello guys/babes/kids/oldfags/ifags in disguise . I have a galaxy nexus here that will only boot into
-download mode,
- fastboot (not working at all, pc wont detect its fastboot and buttons all dead when in recovey/fastboot)
- safe mode - will boot into safe mode if i did combo buttons when attached to charger/pc
The story :
When i booted it from batt pull via only power button press, it will go into download mode straight and if i power off or factory reset in safe mode, it will reboot back into safe mode.
I cant flash anything since fastboot is broken. Ive tried Odin back to factory image of Galaxy Nexus GSM ICS and Jellybean but the prob isnt solved and fastboot is still broken. Tried repartition and bootloader update in ODIN yet still fail. And after every successful flash of repackaged stock, it will directly boot into safe mode (for both ICS and JB factory image). Why i didnt flash using fastboot? Fastboot is broken that is. Lets continue...
Other hardwares are still fine as in safe boot, ive tested all the buttons, display, calls, speaker etc. This is fastboot relate i believe as no matter what pc ive tried and all types of gnex drivers i tried. It wont even fart when connecting to pc(win7 x86). ADB works fine though when i booted into the safe mode. Im able to do adb stuffs but whenever i query it to reboot to fastboot or recovery, a dead end again. OMAPflash the tuna edition for omap4460? Tried yet still the same.
Additional facts : The phone was not unlocked and tempered by any way before the prob happened but now the bootloader is unlocked after i flashed the repackaged ODIN (chainfire posted it)
So XDA Gnex'ers, LET THE HUNT BEGIN!
Sent from my GT-I9100 using xda premium
Reserved for updates
Have you stumbled across this yet?
http://forum.gsmhosting.com/vbb/f63...-i9100g-via-usb-cable-freeeeeeeeeeee-1465412/
iowabowtech said:
Have you stumbled across this yet?
http://forum.gsmhosting.com/vbb/f63...-i9100g-via-usb-cable-freeeeeeeeeeee-1465412/
Click to expand...
Click to collapse
thats omapflash, to be more precise.
op, try that. also, might want to read something more, efrant has a link on it on one of his threads.
sent from my i9250
bk201doesntexist said:
thats omapflash, to be more precise.
op, try that. also, might want to read something more, efrant has a link on it on one of his threads.
sent from my i9250
Click to expand...
Click to collapse
Yup, tried it but its still the same. Fastboot still dosent work and relashing packaged factory images in odin dosent fix the fastboot
Sent from my GT-I9100 using xda premium
Saw a Jtag service nearby and thinking of sending it in. Its roughly after conversion from RM(Malaysian Ringgit) around USD$90. Possible recovery from the issue?
Sent from my GT-I9100 using xda premium
does it try to create an error log? or are you able to pull bug report?
it boots into download mode and safemode so, there's hope.
override182 said:
Searched all over and google yada yada yada. So i end up opening a thread here.
Hello guys/babes/kids/oldfags/ifags in disguise . I have a galaxy nexus here that will only boot into
-download mode,
- fastboot (not working at all, pc wont detect its fastboot and buttons all dead when in recovey/fastboot)
- safe mode - will boot into safe mode if i did combo buttons when attached to charger/pc
The story :
When i booted it from batt pull via only power button press, it will go into download mode straight and if i power off or factory reset in safe mode, it will reboot back into safe mode.
I cant flash anything since fastboot is broken. Ive tried Odin back to factory image of Galaxy Nexus GSM ICS and Jellybean but the prob isnt solved and fastboot is still broken. Tried repartition and bootloader update in ODIN yet still fail. And after every successful flash of repackaged stock, it will directly boot into safe mode (for both ICS and JB factory image). Why i didnt flash using fastboot? Fastboot is broken that is. Lets continue...
Other hardwares are still fine as in safe boot, ive tested all the buttons, display, calls, speaker etc. This is fastboot relate i believe as no matter what pc ive tried and all types of gnex drivers i tried. It wont even fart when connecting to pc(win7 x86). ADB works fine though when i booted into the safe mode. Im able to do adb stuffs but whenever i query it to reboot to fastboot or recovery, a dead end again. OMAPflash the tuna edition for omap4460? Tried yet still the same.
Additional facts : The phone was not unlocked and tempered by any way before the prob happened but now the bootloader is unlocked after i flashed the repackaged ODIN (chainfire posted it)
So XDA Gnex'ers, LET THE HUNT BEGIN!
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
First of all, bricked mean there is nothing beside a black screen. Nowaday device are hard to brick. second, One does not simply flash a gnex with odin. It's simply a big wtf that is shining through my head. 3rd, if fastboot is not working, it's because it need a special driver that i suppose you didnt install. If you can boot your phone in fastboot but can connect to it, it's because you have a broken USB port, which is not the case since you can access adb. 4th, i'm still trying to know how you achieved this. It look to me you were following some instruction and it either ended, tl;dr i will skip a few step, hope it will work which didnt or you missed electricity. Install Kies, get your phone in download and recover your phone from it. Never attempt again to play on custom rom. Man, how can someone derp a galaxy nexus, it is like the easiest device to work with.
chadouming said:
First of all, bricked mean there is nothing beside a black screen. Nowaday device are hard to brick. second, One does not simply flash a gnex with odin. It's simply a big wtf that is shining through my head. 3rd, if fastboot is not working, it's because it need a special driver that i suppose you didnt install. If you can boot your phone in fastboot but can connect to it, it's because you have a broken USB port, which is not the case since you can access adb. 4th, i'm still trying to know how you achieved this. It look to me you were following some instruction and it either ended, tl;dr i will skip a few step, hope it will work which didnt or you missed electricity. Install Kies, get your phone in download and recover your phone from it. Never attempt again to play on custom rom. Man, how can someone derp a galaxy nexus, it is like the easiest device to work with.
Click to expand...
Click to collapse
Thx for the reply.
Some clarification here, im not the owner of this phone. Im using 9100 and im just helping a friend to recovery. Ive tried few pcs and it wont even fart when i plugged in during fastboot or recovery (i read someone that in recovery you can do some commands) but the pc(s) wont even detect a hardware being plugged in.
Plus, in fastboot, i cant press any of the hardware keys. No vol up or vol down and the power button dosent work in recovery. I only got to the 3e stock recovery via 'adb reboot recovery' during in fast mode where it booted into the relaxing chillin android with the triangle + red exclamation mark on its tummy. Pressed all buttons and it went to the 3e recovery.
At the 3e, only power button works. I cant toggle a bit using the vol keys. Note that the vol buttons work to boot the phone into fastboot and download mode and also during safe mode, all the keys works flawlessly.
So, i tried the odin method to recovery this living Gnex but with a faulty heart and kidney but it will still boot to safe mode regardless of ICS or Jellybean.
How did this happen?
I have no idea. The owner of the phone claimed that he has never rooted or tempered it in any way. Plus it was still on ICS when i first got the phone (all data was still intact but it was in safe mode at that time).
Regarding drivers, ive attempted many pcs with almost every drivers available. Shall i list em here:
- KIES
- Naked Nexus drivers
- PDA.net
- the 'official' gnex verizon driver set which is said working on GSM devices etc.
Tried those and adb+download mode works fine. Pcs detect em and tried to install the hardware n search for the drivers but not in fastboot. Its just dead.
killersloth said:
does it try to create an error log? or are you able to pull bug report?
it boots into download mode and safemode so, there's hope.
Click to expand...
Click to collapse
Adb works fine so im able to pull anything when its booted. Im not sure if we can pull anything in download mode. Adb/fastboot didnt work in download mode. Am i correct? Mind to share some light here on this. And in fastboot, none. No vol keys to operate and the 4-5 pc ive tried wont even fart a sound or hint anything saying a hardware connected. Its like its a dead circuit plugged only in fastboot.
This is quite a super rare case here. Most of the dead gnex i found on the next and also in XDA has a working fastboot that only needs drivers to make it working but on this unit, even the vol keys is dead. Awkwarddddd
Sent from my GT-I9100 using xda premium
override182 said:
Thx for the reply.
Some clarification here, im not the owner of this phone. Im using 9100 and im just helping a friend to recovery. Ive tried few pcs and it wont even fart when i plugged in during fastboot or recovery (i read someone that in recovery you can do some commands) but the pc(s) wont even detect a hardware being plugged in.
Plus, in fastboot, i cant press any of the hardware keys. No vol up or vol down and the power button dosent work in recovery. I only got to the 3e stock recovery via 'adb reboot recovery' during in fast mode where it booted into the relaxing chillin android with the triangle + red exclamation mark on its tummy. Pressed all buttons and it went to the 3e recovery.
At the 3e, only power button works. I cant toggle a bit using the vol keys. Note that the vol buttons work to boot the phone into fastboot and download mode and also during safe mode, all the keys works flawlessly.
So, i tried the odin method to recovery this living Gnex but with a faulty heart and kidney but it will still boot to safe mode regardless of ICS or Jellybean.
How did this happen?
I have no idea. The owner of the phone claimed that he has never rooted or tempered it in any way. Plus it was still on ICS when i first got the phone (all data was still intact but it was in safe mode at that time).
Regarding drivers, ive attempted many pcs with almost every drivers available. Shall i list em here:
- KIES
- Naked Nexus drivers
- PDA.net
- the 'official' gnex verizon driver set which is said working on GSM devices etc.
Tried those and adb+download mode works fine. Pcs detect em and tried to install the hardware n search for the drivers but not in fastboot. Its just dead.
Adb works fine so im able to pull anything when its booted. Im not sure if we can pull anything in download mode. Adb/fastboot didnt work in download mode. Am i correct? Mind to share some light here on this. And in fastboot, none. No vol keys to operate and the 4-5 pc ive tried wont even fart a sound or hint anything saying a hardware connected. Its like its a dead circuit plugged only in fastboot.
This is quite a super rare case here. Most of the dead gnex i found on the next and also in XDA has a working fastboot that only needs drivers to make it working but on this unit, even the vol keys is dead. Awkwarddddd
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Great to know you are not the one who did that . So if i understand correctly, you say download mode work ? If yes, flash another stock rom from chainfire using odin. No one wan't to flash with odin, but if fastboot is not working, you shall at least try it. Also, when you are putting the phone in download mode and connecting it to kies, it should detect it has to be restored. i would say the main reason for it to not work is that android debugging is not ticked in developer options. But that would be strange that adb work on safe mode. There is probably a way to that with adb but you will have to google it. Tell your friend to follow instruction next time. And ffs, do not use odin ! (Little idea too, try to get in fastboot not connected on PC and wait a few minutes then see if you can move with the volume button, then try to connect it on pc)
chadouming said:
Great to know you are not the one who did that . So if i understand correctly, you say download mode work ? If yes, flash another stock rom from chainfire using odin. No one wan't to flash with odin, but if fastboot is not working, you shall at least try it.
Click to expand...
Click to collapse
Yes i have already did that few times. Few times of ICS factory image and few with JB. All are repacked version provided by chainfire. Its the full package not the software only with stripped bootloader n recovery. Its still the same
Sent from my GT-I9100 using xda premium
http://forum.xda-developers.com/showthread.php?t=1392310
download and install toolkit from that thread ^^^^^^
uninstall all gnex drivers you installed
reboot pc, open gnex toolkit, with phone unplugged install the drivers
fastboot should work
killersloth said:
http://forum.xda-developers.com/showthread.php?t=1392310
download and install toolkit from that thread ^^^^^^
uninstall all gnex drivers you installed
reboot pc, open gnex toolkit, with phone unplugged install the drivers
fastboot should work
Click to expand...
Click to collapse
Thx, tried it on a few pcs but it still wont work. Even the volkeys in fastboot didnt work :8
Sent from my GT-I9100 using xda premium
override182 said:
Thx, tried it on a few pcs but it still wont work. Even the volkeys in fastboot didnt work :8
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
did you try flashing google's factory image in odin??
my fastboot once was unresponsive, but rebooting into it fixed it
from safemode, if you adb reboot bootloader it is unresponsive?
killersloth said:
did you try flashing google's factory image in odin??
my fastboot once was unresponsive, but rebooting into it fixed it
from safemode, if you adb reboot bootloader it is unresponsive?
Click to expand...
Click to collapse
Yes i had, still boots to safe mode and the fastboot is still dead. Yes ive tried adb reboot bootloader but its dead in fastboot, again.
Sent from my GT-I9100 using xda premium
only suggestion left is to just boot into fastboot, leave it alone for awhile (5-10 mins), then try and plug it in and mess with it.
Try doing the whole driver thing mentioned above but instead of flashing a Google image just do the boot loader portion, what settings are you using to flash in Odin?
Sparx639
killersloth said:
only suggestion left is to just boot into fastboot, leave it alone for awhile (5-10 mins), then try and plug it in and mess with it.
Click to expand...
Click to collapse
Tried yesterday, nothing happened
Sparx639 said:
Try doing the whole driver thing mentioned above but instead of flashing a Google image just do the boot loader portion, what settings are you using to flash in Odin?
Sparx639
Click to expand...
Click to collapse
First tried pda only with auto reboot, no gooding. The i tried with booloader, no good. Then bootloader only, still no good. Then i tested all including pit file, still no good.
Update, sent in for Jtagging few min ago. The phone is not with me now and ill get it back in 3days working or not. I shall report in back after 3 days. Thanks to all by giving suggestion and ideas. See u guys again in 3 days
Sent from my GT-I9100 using xda premium
chadouming said:
Also, when you are putting the phone in download mode and connecting it to kies, it should detect it has to be restored. i would say the main reason for it to not work is that android debugging is not ticked in developer options.
Click to expand...
Click to collapse
adb does not work in download mode/bootloader. adb only works when adbd (adb service) is started, and that happens in android boot process. it means android debug bridge.
sent from my i9250
Sorry for the long delay to anyone waiting for the answer/status.
Jtag cant fix it. Returned the device to a friend. Prolly a mobo replacement is the solution but its damn pricy here in Malaysia. It costs 80% of the price to get a new Gnex.
Hell yeah and thx to everyone supporting this.
Sent from my GT-I9100 using xda premium
Related
OK I was trying to flash an unlocked kernal via ODIN last night, something went wrong and now phone is stuck on the phone--!--computer screen. I cannot get past this screen. vol+home+power doesn't do anything but loop to the same screen.
It shows ODIN MODE in red at the top of the screen, but ODIn won't recognize the phone, nor will Kies (not running at the same time). Computer makes USB connected/disconnected sound when I plug and unplug the phone.
I have tried One-Click Unbrick, did not recognize that phone was connected.
Help!!
which model of Galaxy S2 do you have?
T-Mobile SGH-T989
hose902 said:
T-Mobile SGH-T989
Click to expand...
Click to collapse
there''s currently nothing to flash this phone
it came out only 2 days ago
DEV are still working on finding root
so, the best suggestion is to take it back to the store and get it exchanged
or wait a few more days/weeks until a flashable release becomes available to fix the mistake
I know, I was hasty and now this. Even when there something available to flash, the device isn't being recognized by ODIN. Any troubleshooting help for this?
When I managed to get my Vibrant into that mode I could pull the battery, hold volume up, put the battery in, press and release power (still holding volume up) and it'd kick back into download mode everytime. Once in download mode I could plug the USB in and a running ODIN would see it pop up. If ODIN wasn't running and USB was already plugged in things wouldn't work right.
I haven't tried ODIN on the GS2 yet (I'll wait for a root ). I did find the vibrant nearly impossible to brick though... trust me I unexpectedly tried quite hard.
You might need the newest ODIN for GS2 support, and possibly newer drivers.
Hey, Hey, Hey...
My Story...
1. I got a TMO Samsung Galaxy S2
2. Tried to root
3. Used Odin to root and install ROM and referenced the following thread: http://forum.xda-developers.com/showthread.php?t=1095274
4. Realized phone models are not the same
5. Phone does not boot and nothing comes up on the screen
6. No lights or LED indicators (i.e. charging) HOWEVER....
7. ODIN recognizes the phone when I plug in the phone via USB
8. Tried to load stock rom:http://forum.xda-developers.com/showthread.php?t=1321811
9. ODIN gets stuck on <ID:0/005> SetupConnection...
10. I am unable to access SD Card for CWR
11. Next step? Return or exchanges are currently not an option.
Thanks in advance for the assistance!
fix4tv said:
Hey, Hey, Hey...
My Story...
1. I got a TMO Samsung Galaxy S2
2. Tried to root
3. Used Odin to root and install ROM and referenced the following thread: http://forum.xda-developers.com/showthread.php?t=1095274
4. Realized phone models are not the same
5. Phone does not boot and nothing comes up on the screen
6. No lights or LED indicators (i.e. charging) HOWEVER....
7. ODIN recognizes the phone when I plug in the phone via USB
8. Tried to load stock rom:http://forum.xda-developers.com/showthread.php?t=1321811
9. ODIN gets stuck on <ID:0/005> SetupConnection...
10. I am unable to access SD Card for CWR
11. Next step? Return or exchanges are currently not an option.
Thanks in advance for the assistance!
Click to expand...
Click to collapse
I'm a bit new to this, but a custom ROM shouldn't affect your recovery mode. Are you sure you are using the correct buttons and methods to boot recovery?
Might want to make a new thread instead of necroing something from when the phone was 2 days old.
I have GT I9100 and done the same thing and got the same result . stuck at setup connection with odin
Please Help
Go into device manager when is plugged in and if it says qhd-usb or something like that its a hard brick. What tipped me off was you said it makes two noises when you plug in. that's a tell tell sign your hard bricked
Sent from my SGH-T989 using xda premium
soft bricked my phone (i hope)
i have sgh-t989 (t-mobile) i am running a miui rom. it wont boot it just goes to miui boot up screen. i can go to the download mode but not recovery (how do u do that) but when im in downoad mode Odin dosnt recognize my phone. and my computer says it is an unknown device.
tried new wire, uninstalling re-installing kies, stopped all processes, diff computer tried to boot for a day, let battery out for a day, and a few other things.
please help and thank you.
iamnoone626 said:
i have sgh-t989 (t-mobile) i am running a miui rom. it wont boot it just goes to miui boot up screen. i can go to the download mode but not recovery (how do u do that) but when im in downoad mode Odin dosnt recognize my phone. and my computer says it is an unknown device.
tried new wire, uninstalling re-installing kies, stopped all processes, diff computer tried to boot for a day, let battery out for a day, and a few other things.
please help and thank you.
Click to expand...
Click to collapse
You should try to uninstall then reinstall driver, and try another usb port. In my experience, Odin seems to be picky, it only recognizes your phone if you plug it in the usb port that you used in the first time.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Recovery is accessed by holding both vol + and - while starting the phone. Hold them both while pressing the power button, then release the power button when it vibrates, keep holding the vol buttons till you see the recovery screen.
Alarmmy said:
You should try to uninstall then reinstall driver, and try another usb port. In my experience, Odin seems to be picky, it only recognizes your phone if you plug it in the usb port that you used in the first time.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
ok i have done this through kies is there another way that you can do this?
---------- Post added at 09:34 AM ---------- Previous post was at 09:26 AM ----------
nagoshi said:
Recovery is accessed by holding both vol + and - while starting the phone. Hold them both while pressing the power button, then release the power button when it vibrates, keep holding the vol buttons till you see the recovery screen.
Click to expand...
Click to collapse
when i do this it only takes me to download mode.
Have a look at http://forum.xda-developers.com/showthread.php?t=1513359
for a DL link for the USB Drivers
Cheers,
Chris
Sk3tchy said:
Have a look at http://forum.xda-developers.com/showthread.php?t=1513359
for a DL link for the USB Drivers
Cheers,
Chris
Click to expand...
Click to collapse
i tryed this but still odin does not recognize my phone. (no yellow box shows up)
So it seems that ODIN can only recognize my phone if the phone is powered on and running but will not recognize it in download mode. I am using the same cables I have used in the past as well as the same computer running Windows 7. Running stock ICS FH13 Unrooted and trying to root but cannot because once I enter download mode, ODIN stops seeing the device. Have tried re installing drivers many times and all USB ports on the computer with different USB cables. Hoping that somebody has a suggestion for getting the phone to be recognized in download mode for me.
ZeusIII said:
So it seems that ODIN can only recognize my phone if the phone is powered on and running but will not recognize it in download mode. I am using the same cables I have used in the past as well as the same computer running Windows 7. Running stock ICS FH13 Unrooted and trying to root but cannot because once I enter download mode, ODIN stops seeing the device. Have tried re installing drivers many times and all USB ports on the computer with different USB cables. Hoping that somebody has a suggestion for getting the phone to be recognized in download mode for me.
Click to expand...
Click to collapse
Is usb debugging checked
Sent from my SPH-D710 using xda premium
Yes debugging is checked.
Some more information. Turns out the phone (originally my friend's) needed to be taken in for service and when he did this he read somewhere about the USB jig to remove the custom binary counter. When he did this he flashed a gingerbread bootloader to use the jig. Only thing is, he didn't ask me for help (I've usually helped him out with this stuff in the past) and I think he flashed an international version of the bootloader. Reason being when I boot the phone it says Samsung Galaxy SII GT-I9100 where it should not have that last part. I remember reading somewhere about this and how it happened to somebody but they had CWM recovery and flashed a special zip. I do not have this option because of the stock recovery and unrooted ROM. Just wondering if there is anything that can be done to reverse this. I can run the phone and use it still but would rather root it and continue the way I have always done with my past phones.
ZeusIII said:
Some more information. Turns out the phone (originally my friend's) needed to be taken in for service and when he did this he read somewhere about the USB jig to remove the custom binary counter. When he did this he flashed a gingerbread bootloader to use the jig. Only thing is, he didn't ask me for help (I've usually helped him out with this stuff in the past) and I think he flashed an international version of the bootloader. Reason being when I boot the phone it says Samsung Galaxy SII GT-I9100 where it should not have that last part. I remember reading somewhere about this and how it happened to somebody but they had CWM recovery and flashed a special zip. I do not have this option because of the stock recovery and unrooted ROM. Just wondering if there is anything that can be done to reverse this. I can run the phone and use it still but would rather root it and continue the way I have always done with my past phones.
Click to expand...
Click to collapse
Does it have the yellow triangle when you see that? My phone shows that when I have the triangle.
No yellow triangle.
Mine has said gti9100 before. Don't remember what I flashed. Think it was a leak through mobile odin. So you may or may not be screwed...
sent from my BAD A$$ Epic touch
Hoping not but this is stock FH13. Did not flash anything and my computer/ODIN does not recognize my phone being plugged in when in download mode... Hoping someone can chime in here about something they would try or something I might have missed. I think I got all the basic troubleshooting stuff out of the way but if anybody can point something out, great!
Do u put your phone in download mode then hit volume up then connect to usb?
Sent from my SPH-D710 using xda premium
Yes, I go from full power off with USB unplugged and press and hold the power and vol down keys until I get the warning screen. I then hit vol up to continue and then plug in my phone to the computer.
With further research seems as though I am hosed. In download mode it lists my device as "product name: GT-i9100" where it should say "product name: SPH-D710" Still hoping someone can save me so I'm not stuck on stock but seems as though this device had a international phone's bootloader flashed onto it.
Yes, I go from full power off with USB unplugged and press and hold the power and vol down keys until I get the warning screen. I then hit vol up to continue and then plug in my phone to the computer.<br />
<br />
With further research seems as though I am hosed. In download mode it lists my device as "product name: GT-i9100" where it should say "product name: SPH-D710" Still hoping someone can save me so I'm not stuck on stock but seems as though this device had a international phone's bootloader flashed onto it.
Click to expand...
Click to collapse
Thats the problem i couldnt help u there but u can try installing the drivers u need
Sent from my SPH-D710 using xda premium
You could get Mobile Odin and flash using that. There's a lite option that will let you flash Agat's kernel and then you can go from there.
Newbie to rooting, using a VZW Galaxy Nexus.
I tried flashing 4.2.2 this evening, and somewhere along the way I bricked my phone. Simply turning on the phone results in the Google and Unlock icon screen, as does pressing Power and Volume Up. I can only boot into Odin mode (with Power + Volume Down), which I discovered by accident, and I've no idea what that does.
At this point, I'd be happy just getting back to stock 4.1.1. Any and all help greatly appreciated.
ODIN has no place being used on a Nexus device. You are in fastboot mode. There are several stickies at the top of this section on how to properly root your device. Read them.
063_XOBX said:
ODIN has no place being used on a Nexus device. You are in fastboot mode. There are several stickies at the top of this section on how to properly root your device. Read them.
Click to expand...
Click to collapse
I wasn't trying to use Odin; it's simply the only thing my phone will do at this point. The actual rooting of the phone went fine - I used Nexus Root Toolkit (1.6.3). The phone bricked when I was attempting to restore the backup I'd made.
My computer won't recognize the phone when plugged in. I downloaded drivers from Samsung - nothing. The Toolkit doesn't find the phone when attached.
I'm at a loss.
Again. Follow the stickies right at the top of this section.
You're at a loss because you used a toolkit rather than the slightly more challenging and infinitely more educational "right" way.
Have you tried booting with volume up+down+power, to see if the bootloader is still there?
salvation eedsfur
bodh said:
Have you tried booting with volume up+down+power, to see if the bootloader is still there?
Click to expand...
Click to collapse
Just tried and yes, bootloader is still there. But since my computer won't recognize the phone (I've tried installing and re-installing the ADB drivers), I can't figure out how to flash a ROM (stock or otherwise).
http://forum.xda-developers.com/showthread.php?t=1626895 You need fastboot drivers in fastboot / bootloader mode. And you're all set.
bodh said:
http://forum.xda-developers.com/showthread.php?t=1626895 You need fastboot drivers in fastboot / bootloader mode. And you're all set.
Click to expand...
Click to collapse
So far, so good. Still had issues installing the ADB driver, but finally got it to work. Many, many thanks.
If you can't flash your device in a regular way (via fastboot) there's also a possibility for Odin flash. It's not recommended but it works (it has never let me down). There are few threads about it.
m.kochan10 said:
If you can't flash your device in a regular way (via fastboot) there's also a possibility for Odin flash. It's not recommended but it works (it has never let me down). There are few threads about it.
Click to expand...
Click to collapse
Thanks, m.kochan - the problem was getting the computer to recognize the device. It finally came down to trail-and-error with installing and re-installing drivers. I had to boot into recovery, uninstall every Samsung/Google/Android related driver, reboot the computer, then install only the ADB driver. From there, I was able to flash the stock image using efrant's guide for dummies.
My phone is stuck at the samsung logo for about 30 min. I tried flashing another rom but it didnt work. I can access download mode but not recovery mode.
What is my possible solution?
If the 3 button method doesn't work you may be able try ADB to get into recovery.
Sent from my SGH-I747 using xda app-developers app
Thenewguy1 said:
If the 3 button method doesn't work you may be able try ADB to get into recovery.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
The three button method as in "Download Mode"?
ThatGuyIsEpic said:
My phone is stuck at the samsung logo for about 30 min. I tried flashing another rom but it didnt work. I can access download mode but not recovery mode.
What is my possible solution?
Click to expand...
Click to collapse
If you can get into download mode, then ODIN TWRP to your phone. Or ODIN the proper rooted ROM.
Sent from my SGH-I747
aybarrap1 said:
If you can get into download mode, then ODIN TWRP to your phone.
Sent from my SGH-I747
Click to expand...
Click to collapse
Do I flash TWRP in the PDA box on Odin?
Also note that I tried different usb cables and usb ports but nothing is working its still stuck at the boot screen
aybarrap1 said:
If you can get into download mode, then ODIN TWRP to your phone. Or ODIN the proper rooted ROM.
Sent from my SGH-I747
Click to expand...
Click to collapse
I flashed TWRP and tried booting into recovery mode but it doesnt work I get the samsung logo and in the top left hand corner I get recovery boot in blue text then after that it goes black
Is my device useless now?
aybarrap1 said:
If you can get into download mode, then ODIN TWRP to your phone. Or ODIN the proper rooted ROM.
Sent from my SGH-I747
Click to expand...
Click to collapse
All the ROMs I know require you to flash via ClockworkMod is there any ROMs you can flash with Odin?
ThatGuyIsEpic said:
I flashed TWRP and tried booting into recovery mode but it doesnt work I get the samsung logo and in the top left hand corner I get recovery boot in blue text then after that it goes black
Is my device useless now?
Click to expand...
Click to collapse
Vol up + home + power. When your device vibrates and you see the blue text, release just the power button
xbeerdroidx said:
vol up + home + power. When your device vibrates and you see the blue text, release just the power button
Click to expand...
Click to collapse
thank you so much i got it work :d
ThatGuyIsEpic said:
All the ROMs I know require you to flash via ClockworkMod is there any ROMs you can flash with Odin?
Click to expand...
Click to collapse
Uhhg
Just 5 minutes of reading and looking for and answer and you wouldn't have to make this thread -_-
http://www.sammobile.com/firmwares/1/?model=SGH-I747&pcode=ATT#firmware
Any of those firmwares will work on a i747
If you have a i747M or you're not ATT look here and select your correct phone information in the drop down boxes:
http://www.sammobile.com/firmwares/1/
These will restore you to factory, you will still have to root.
I still cant get my phone to work.
I have done this many times and the galaxy s3 logo comes up and then nothing..
I wasnt rooting my phone i was charging it last night.... the phone got hot so i unplugged. I tried to turn it on in the morning and it wouldnt turn on. i know how to put my phone in recovery mode, ive done it before but it wont. it will go into download mode but thats.about. it. I know i dont know much about phones but i know how to put it in recovery mode to clear the cache and that isnt working.... any thoughts?
jessicarabbit85 said:
I still cant get my phone to work.
I have done this many times and the galaxy s3 logo comes up and then nothing..
I wasnt rooting my phone i was charging it last night.... the phone got hot so i unplugged. I tried to turn it on in the morning and it wouldnt turn on. i know how to put my phone in recovery mode, ive done it before but it wont. it will go into download mode but thats.about. it. I know i dont know much about phones but i know how to put it in recovery mode to clear the cache and that isnt working.... any thoughts?
Click to expand...
Click to collapse
Does the phone actually connect to your pc? I assume you have the proper drivers installed? Open odin while in download mode and see if it detects the phone. Sounds as if the phone's bootloader is screwed. If its detected you should be able to fix without much trouble. Sometimes you have to flash the original stock rom as the newer ones sometime have trouble for whatever reason. Version 4.0.4 i believe.
scotteb said:
Does the phone actually connect to your pc? I assume you have the proper drivers installed? Open odin while in download mode and see if it detects the phone. Sounds as if the phone's bootloader is screwed. If its detected you should be able to fix without much trouble. Sometimes you have to flash the original stock rom as the newer ones sometime have trouble for whatever reason. Version 4.0.4 i believe.
Click to expand...
Click to collapse
I dont have odin on this computer, when i plug it in it isnt recognized, i assumed that was because it wasnt technically powered on. I guess i'll take it to someone tomorrow to have it looked at.... im so out of my element here... thanks.
jessicarabbit85 said:
I dont have odin on this computer, when i plug it in it isnt recognized, i assumed that was because it wasnt technically powered on. I guess i'll take it to someone tomorrow to have it looked at.... im so out of my element here... thanks.
Click to expand...
Click to collapse
If you can get the phone into download mode , it should auto install your drivers and make it recognizable by Odin.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
i installed cm14.1 today from the cyanogenmod website i had everything running fine until i reboot into recovery. i got a black screen and it didnt bot into recovery at all so i held my power button and volume down and nothing happens. i cant even boot up into fast boot or anything. nothing is turning my phone on. when i connect it to my pc nothing happens. is there anything i can do?
There's a mega unbrick guide for the OnePlus 3, use that then install the correct firmware and install the custom TWRP and re flash the ROM
i tried that method but the device doesnt even show up on my pc
envious86 said:
i tried that method but the device doesnt even show up on my pc
Click to expand...
Click to collapse
Get this sorted yet? You'll need a modified TWRP recovery for the newest CM based builds. I went through the same thing yesterday or the day before. Try holding volume down and power for like 30 seconds until you feel it vibrate that it is rebooting. Then hold volume *UP* while it reboots or if you see the "your device is not safe..." flash screen hurry and press volume down and go into fastboot. From there you can fastboot flash a new recovery.
I had the same problem as well, in device manager go to ports (com & LPT) and it will show up there under qualcum device. Don't forget to go and turn off certificate verification
Thanks guys I'll try this after work. Hopefully it works. If not sure oneplus are hopefully releasing a new phone soon
No it didn't work. I have a feeling I deleted something I shouldn't have because I was clearing out my files before I restarted and that was that.
you gotta use special twrp recovery for cm14.1...
https://www.androidfilehost.com/?fid=385035244224394867
Just use the recovery rahditzz provided you with a link, if your phone is stuck on black screen with white led hold your power button until it turns off, then boot to fastboot and flash the recovery and you will boot...
rahditzz said:
you gotta use special twrp recovery for cm14.1...
https://www.androidfilehost.com/?fid=385035244224394867
Click to expand...
Click to collapse
thanks didnt work. when i fastboot flash recovery and boot again it just goes into a black screen again
Then use unbrick method 2..
rahditzz said:
Then use unbrick method 2..
Click to expand...
Click to collapse
neither method works. all i can do is get into fastboot mode thats it. it wont show up on my pc at all
Method 2 workshop 100%, unless its a hardware fault..
Are you pushing volume up while plugging in cable?
I am. To be honest its very complex too me. I'm new to android and all this is so hard. I follow steps but I'm not 100% sure what I doing. Also my computer isn't great. Do these methods work on vista? Is there a video tutorial or anything? Sorry for annoying you and you don't understand how thankful i am for your help.
I jeep getting the sahara communication failed error
envious86 said:
I am. To be honest its very complex too me. I'm new to android and all this is so hard. I follow steps but I'm not 100% sure what I doing. Also my computer isn't great. Do these methods work on vista? Is there a video tutorial or anything? Sorry for annoying you and you don't understand how thankful i am for your help.
Click to expand...
Click to collapse
Your running vista???? Good god update your OS!!
Maybe your fastboot drivers got updated? There were some reports around this. You could try reinstalling the drivers and following the unbrick guide without an internet connection.
Sent from my ONEPLUS A3003 using Tapatalk
Cool u can boot into Fastboot, what error do you get when you type Fastboot devices? Nothing shows up?