Hi All,
I have been asked by a friend to have a look at their Desire which isn't booting up, i've tried searching the forums but am at a bit of a dead end.
Basically when powering up the phone it goes to a white screen with the green htc logo and stays like this indefinitely.
I can however boot into HBOOT and it gives me the following info:
BRAVO PVT3 SHIP S-ON
HBOOT-1.02.0001
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.17.05.23
Jul 22 2011, 16:19:16
HBOOT
FASTBOOT
RECOVERY
CLEAR STORAGE
SIMLOCK
When I try to boot into RECOVERY it goes back to the white screen with htc logo.
When I try CLEAR STORAGE the problem remains.
I can go into FASTBOOT and this does change to FASTBOOT USB when I plug it into the USB port.
So because it's S-ON this means I can't push a recovery image via command prompt right?
I've tried downloading: RUU_Bravo_Froyo_HTC_WWE_2.29.405.14_Radio_32.49.00.32U_5.11.05.27_release_224699_signed.exe from shipped-roms.com, extracting ROM.zip and changing the name to PB99IMG.ZIP and putting it into the root of my sd cards (4GB and 16GB kingstons) but when I boot the phone into HBOOT i get the following:
SD Checking...
Loading...[PB99DIAG.zip]
No image!
Loading...[PB99DIAG.nbh]
No image or wrong image!
Loading...[PB99IMG.zip]
and a progress bar loads, then
Checking..[PB99IMG.zip]
followed by the following message:
CID incorrect!
Update Fail!
Do you want to reboot device?
<VOL UP> Yes
<VOL DOWN> No
I've tried turning my SD card into a gold card but I presume this has failed if I'm getting that message?
Has anybody got any pointers? Is the phone bricked?
Any help is much appreciated...
yh ur correct ul have to get a working goldcard to pass the cid check
Sent from my HTC Desire
jmcclue said:
yh ur correct ul have to get a working goldcard to pass the cid check
Sent from my HTC Desire
Click to expand...
Click to collapse
OK, I think I've successfully created the goldcard now, was using the wrong CID!
I transferred the same PB99IMG.zip to the root of the goldcard and booted into HBOOT. It loaded again and failed with the following message:
Main Version is older!
Update Fail!
Do you want to reboot device?
<VOL UP> Yes
<VOL DOWN> No
What does this mean? Am I using the wrong PB99IMG.zip or something?
Is there any way to actually check that the creation of the goldcard was successful? Or does the fact that this is a different message mean that it's passed the CID check?
Your Phone is NOT bricked, go to the thread below, I use the ROM in the second thread and have had no trouble with it
http://forum.xda-developers.com/showthread.php?t=1275632
http://forum.xda-developers.com/showthread.php?t=1403113
Taysider said:
Your Phone is NOT bricked, go to the thread below, I use the ROM in the second thread and have had no trouble with it
http://forum.xda-developers.com/showthread.php?t=1275632
http://forum.xda-developers.com/showthread.php?t=1403113
Click to expand...
Click to collapse
Cheers, so how do I get from where I am now to flashing a custom ROM?
I see from the 1st link you posted it says (if phone is S-ON):
S-ON
"I'm S-ON, I can't boot recovery, and my phone doesn't boot "
This is a bit of a worse situation, as you cannot flash system critical parts such as the recovery image and just restore a backup. This unfortunately means that you will lose all of your data when you attempt to fix the phone.
[STEP1]- Make sure that you have a goldcard. If not, create one from the tutorial.
[STEP2]- Battery pull. Hold the BACK button and the POWER button to boot into FASTBOOT mode.
[STEP3]- Download the latest WWE RUU from here
[STEP4]- Run the RUU and wait for completion WARNING: DO NOT, BY ANY CIRCUMSTANCES INTERRUPT THE PROCESS - THIS WILL MORE THAN LIKELY END UP WITH A BRICKED PHONE - NOT EVEN IF GOD HIMSELF TELLS YOU TO DO SO, OR IF THE US PRESIDENT THREATENS YOU WITH THERMO-NUCLEAR WAR
[STEP5]- Once the phone is booted, you are now returned completely to stock. You will need to re-root again, and I'd recommend S-OFF
Not sure about step 4 here?
that ruu is an exe file so with ur phone plugged in via usb just run the file (double click it) on ur computer. just follow all bortaks instructions
and ur goldcard works its fine
Sent from my HTC Desire
I'm still not sure why you're loosing time with those old RUUs, as I always say use 2.3, no CID check, easy install, easy s-off and root, the world goes round...
Sent from my HTC Desire via flashes and thunders
nlooooo said:
I'm still not sure why you're loosing time with those old RUUs, as I always say use 2.3, no CID check, easy install, easy s-off and root, the world goes round...
Sent from my HTC Desire via flashes and thunders
Click to expand...
Click to collapse
lol
where do u get this 2.3? htcdev?
Sent from my HTC Desire
jmcclue said:
lol
where do u get this 2.3? htcdev?
Sent from my HTC Desire
Click to expand...
Click to collapse
Smth like that...
Sent from my HTC Desire via flashes and thunders
nlooooo said:
I'm still not sure why you're loosing time with those old RUUs, as I always say use 2.3, no CID check, easy install, easy s-off and root, the world goes round...
Sent from my HTC Desire via flashes and thunders
Click to expand...
Click to collapse
So how do I fix my problem this way?
go to HTCdev and download the 2.3 ruu
Sent from my HTC Desire
the 2.3 ruu nloooo is on about, just run it the same way as the first 1 u tried
Sent from my HTC Desire
jmcclue said:
the 2.3 ruu nloooo is on about, just run it the same way as the first 1 u tried
Sent from my HTC Desire
Click to expand...
Click to collapse
OK, I ran the 2.3 RUU and it seemed to do the trick. I could then turn the phone on but it seems a lot slower than I'm used to.
I've now rooted it and have S-OFF using revolutionary. Now it boots OK most of the time but as soon as I enter my PIN to unlock the SIM it reboots, and half the time when it reboots it seems to get stuck in a boot loop and gets quite warm.
I have a feeling there may be some underlying hardware issue at the heart of this problem.
Will try a custom ROM next and see if it makes any difference.
seklly said:
So how do I fix my problem this way?
Click to expand...
Click to collapse
Go to htc dev site, kernel source code section, configure filter by device (desire) and check 'other' below. Click find files and the first on the list is 2.3 upgrade, download it, install HTC sync, reboot phone to bootloader (not fastboot) and run .exe file from RUU. Simple, isn't it.
Sent from my HTC Desire via flashes and thunders
nlooooo said:
Go to htc dev site, kernel source code section, configure filter by device (desire) and check 'other' below. Click find files and the first on the list is 2.3 upgrade, download it, install HTC sync, reboot phone to bootloader (not fastboot) and run .exe file from RUU. Simple, isn't it.
Sent from my HTC Desire via flashes and thunders
Click to expand...
Click to collapse
I didn't open the second page... :banghead:
Sent from my HTC Desire via flashes and thunders
nlooooo said:
I didn't open the second page... :banghead:
Sent from my HTC Desire via flashes and thunders
Click to expand...
Click to collapse
D'OH
Sent from my HTC Desire
Can you give me a link to the 2.3, i cant find it and got the same problem here. Thanks
Oyoyewii said:
Can you give me a link to the 2.3, i cant find it and got the same problem here. Thanks
Click to expand...
Click to collapse
nlooooo has given perfect instructions above
Sent from my HTC Desire
Ignore
Sent from my HTC Desire
Related
Right i'm a bit of a noob at all this and have got myself in a bit too deep!!!
The problems started after applying the CM7 hboot and s-off with aplpharev. (which seemed to go OK)
After applying a new rom i got stuck in a boot loop so tried other roms from recovery and had the same problem, Nandroid also wouldn't restore.
I then decide it would be best to flash an RUU which went tits up and has lead to the black screen with 4 triangles in each corner. I have tried several other RUUs but no luck either. I also cannot boot in to recovery at all now.
When i plug and unplug the device to a pc, it gives the following info:
AlphaRev CM7 r2
Bravo PVT3 Ship S-Off
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.11.05.27
Aug 10 2010, 17:52:18
Pluging it in returns it to the black screen
I have trawled the forums but nothing seems to work (i have resorted to creating a thread after 2 days of trying things!)
Any chance of an idiots guide from a guru on how to get the device usable again? (bearing in mind my reasonably limited knowledge!)
I know there are many threads on this already but i can't seem to find a fix that works.
Ta Much
Can't look into this too much right now but I'm pretty sure your RUU flash failed because you're using the r2 version of that HBOOT which has something in it that prevents it from being over-written by the RUU. Try flashing the Downgrader HBOOT and then give the RUU a shot. Should get you back to stock.
Also, move this to the Q&A thread.
Boot in to fastboot then
plug in usb
Then run ruu. As administrator if you have windows 7/vista
Sent from my HTC Desire using XDA App
I have same problem two days ago. Mine stuck at CM7 r2 partition while RUU need 250MB of system partition. After fighting around 4hours then I try to to flash HBOOT downgrader and then flash stock HBOOT then run RUU again.
Once alive I am rooting it again again and flash custom rom since I am not satisfied with original rom hahaha..
Sorry for my bad english.
Sent from my HTC Desire using XDA App
You just need to flash the downgrader hboot to flash the ruu.. And only if you are using one of the new r2 hboots. The ruu will over write the hboot so no point in flashing the downgrader and then the stock.
Sent from my HTC Desire using XDA App
reaper7881 said:
Boot in to fastboot then
plug in usb
Then run ruu. As administrator if you have windows 7/vista
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
How do i boot to fastboot (power and vol down doesn't do anything)?
I had same problem when running ruu to return to stock from rooted, soff etc.
Just unplugged, plugged back in and re-ran ruu then everything was ok.
jordan.harris01 said:
You just need to flash the downgrader hboot to flash the ruu.. And only if you are using one of the new r2 hboots. The ruu will over write the hboot so no point in flashing the downgrader and then the stock.
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Again, may be being stupid, but how do i flash the hboot the only screen i can access is the htc and 4 triangles?
try to cool down your device and flash again...
it sounds stupid, but it works for me.
i put my device without battery in fridge for 5 minutes, then i flash again and it works.
if the device warms up it stop working.
mine have hardware fault.
br stupsi
stupsi99 said:
try to cool down your device and flash again...
it sounds stupid, but it works for me.
i put my device without battery in fridge for 5 minutes, then i flash again and it works.
if the device warms up it stop working.
mine have hardware fault.
br stupsi
Click to expand...
Click to collapse
Have actually tried this and no joy!
Hi guys I had this problem yesterday and I managed to bring back to normal just reinstall the stock hboot after you instal stock hboot restart the phone and install RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed
How I can install stock hboot if I can't get into fastboot? oO
try holding the back button instead of volume down
Sent from my HTC Desire using XDA App
No need to get in fastboot must have HTC logo on dysplay and triangles in the corners and then open the install program that hboot
the butons not working the phone is automaticaly in fastboot
en_mih said:
No need to get in fastboot must have HTC logo on dysplay and triangles in the corners and then open the install program that hboot
Click to expand...
Click to collapse
How are you installing hboot then? I am using alpharev and when i plug the device in it doesn't recognise it and just says searching for device.
open android flasher conect your phone to usb cable verify the phone to be open and then select on android flasher hboot select the stock hboot wait 1 or 2 seconds and then open the Ruuand wait and your phone is back to life
http://www.2shared.com/file/nxR9F2RN/AndroidFlasher180.html
en_mih said:
open android flasher conect your phone to usb cable verify the phone to be open and then select on android flasher hboot select the stock hboot wait 1 or 2 seconds and then open the Ruuand wait and your phone is back to life
Click to expand...
Click to collapse
You my friend are a ****ing genius!!!!
I had Android flasher sat on my desktop as well.
New hboot, new Ruu... BOOOOOOOOOOOOOOOM.......
A fully working desire again.
Please accept my sincerest thanks!
im so hapy for you man
First off, I apologies for asking what might be an apparently obvious question but I'm stuck
I've read that if you can do anything with your phone then its not bricked. Well I can't seem to get into bootloader, recovery or fastboot when I turn the phone on I always get a black screen with apostrophes in each corner and HTC in the middle.
I can issue fastboot commands through USB and I can run ruu's from the PC but they always fail at the end of writing system.
Problem is I'm trying to get a warrenty return (which is why I was unrooting) and the only time I see a different screen is after running the ruu and unplugging the USB. This gives me a white screen that shows alpharev and clearly gives the game away that the phones been rooted.
So is this technically a brick? And if not, is there a way put of this?
What hboot u have? Stock? Alpharev cm/oxygen?
Sent from my HTC Desire
It was/is alpharev cm (the second one)
Flash the bravo downgrader hboot from alpharev, after the ruu.
Sent from my HTC Desire
andQlimax said:
Flash the bravo downgrader hboot from alpharev, after the ruu.
Sent from my HTC Desire
Click to expand...
Click to collapse
Thanks, but how do I flash it if I can't get into recovery or anything or is it like the original alpharev thing?
stanleywinston said:
Thanks, but how do I flash it if I can't get into recovery or anything or is it like the original alpharev thing?
Click to expand...
Click to collapse
In the same way u flashed the cm7 hboot..with fastboot command or the p99img zip in bootloader mode
Sent from my HTC Desire
andQlimax said:
In the same way u flashed the cm7 hboot..with fastboot command or the p99img zip in bootloader mode
Sent from my HTC Desire
Click to expand...
Click to collapse
OK thanks, so when I'm on the screen with just HTC on it I issue the fastboot command and then rerun the ruu?
Just to clarify (and perhaps help anyone else in this state), is this because of a change in alpharev that prevents the ruu changing tthe hboot? Because last time I returned my phone I followed the instructions that simple said to run the ruu so I'm presuming something has changed.
thanks for your help. All back up and running now.
Hi all,
I have a big problem with my desire. I was unable to start my desire (S-ON, never rooted) so I have decided to downlod RUU:
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed.exe
booted in fastboot with vol- + power and ran the above file but the process has failed so I had to reboot and since that moment I don't have fastboot menu anymore and I just see the 4 triangles screen. I can still connect phone to PC (windows 7) and run RUU file but everytime it fails with 152 error and "Radio_V2 Fail-PU" error (I can see the RUU process when I disconnect the USB cable, when I connect the cable again the RUU disappear and I see again the black screen with HTC and 4 triangles). I have also tried RUU_HTC Desire Android 2.3 Upgrade (Gingerbread).exe but no lucks.
Any suggestion on how to get my desire working again?
any help is really really appreciated,
many thanks
Already checked bortak's troubleshooting guide (see my sig).
Sent from my HTC Desire using Tapatalk
MatDrOiD said:
Already checked bortak's troubleshooting guide (see my sig).
Sent from my HTC Desire using Tapatalk
Click to expand...
Click to collapse
Thanks for your response. I have followed the guide above, point "[4]RUU PROBLEMS", S-ON solution, but I still cannot flash the RUU. I am stuck on HTC logo with "4" triangles and I get always the same error:
[1] BOOTLOADER - OK
[2] RADIO_V2 - FAIL-PU
[3] RADIO_CUST - OK
[4] BOOT - OK
[5] RECOVERY - OK
[6] SYSTEM - OK
[7] USERDATA - OK
[8] SPLASH1 - OK
[9] SPLASH2 - OK
Partition update fail!
Update Fail!
Here are the information I get if I disconnect the USB cable (it seems to be stuck in RUU mode):
BRAVO PVT1 SHIP S-ON
HBOOT-1.02.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.11.05.27
Jul 22 2011.16:19:16
RUU
Please help me!
Any suggestion? it is an hardware problem?
thanks
Seems like radio-brick which is currently unfixable.
Which RUU did you try to flash?
Sent from my HTC Desire using Tapatalk
MatDrOiD said:
Seems like radio-brick which is currently unfixable.
Which RUU did you try to flash?
Sent from my HTC Desire using Tapatalk
Click to expand...
Click to collapse
I tried this:
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00. 32U_5.11.05.27_release_159811_signed.exe
but no luck.
Any suggestion? could I try to use revolutionary in order to have access to the recovery once again? other ideas?
Try 2.3.3 RUU from htcdev.com.
have you been sucessful? i have the same problem, with an originally vodafone branded device.
now I'm:
BRAVO PVT1 SHIP S-ON
HBOOT-1.02.0001
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.17.05.08
Jul 22 2011.16:19:16
RUU files fail with different errors and "Radio_V2 Fail-PU" error.
also Black screen and fancy triangles etc....
Goldcard is created and in place, but still couldn't use the WWE RUU...
Is it a complete brick? Is it confirmed that "radio-brick which is currently unfixable."??
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed
gives me ERROR [140]: BOOTLOADER-VERSION-ERROR
RUU_Bravo_Froyo_Vodafone_UK_2.33.161.2_Radio_32.49.00.32U_5.11.05.27_release_157522_signed
gives me ERROR [152]: IMAGE-UPDATE-ERROR
RUU_HTC Desire Android 2.3 Upgrade (Gingerbread)
gives me ERROR [152]: IMAGE-UPDATE-ERROR
I feel like troubleshootin'-Putin already, because I'm on it since 7 hours and there don't seem to be a solution!
Guess what - i have the exact same problem!
However if i go through the recovery procedure, sometimes the Radio image flashes ok, however during boot up, the phone is stuck on the htc white start up screen. If i flash the RUU again, i end up with the radio error.
HELP!!!
ardsar said:
Guess what - i have the exact same problem!
However if i go through the recovery procedure, sometimes the Radio image flashes ok, however during boot up, the phone is stuck on the htc white start up screen. If i flash the RUU again, i end up with the radio error.
HELP!!!
Click to expand...
Click to collapse
please tell (and how) if you are successful!!
i got exactly the same problem! has anyone any idea how to solve this?
thx
mtbiker_kev said:
i got exactly the same problem! has anyone any idea how to solve this?
thx
Click to expand...
Click to collapse
Radio-bricks are currently unfixable. Unless one can flash 2.3.3 RUU, which is the last hope.
Tried 2.3.3 RUU but nothing changed...I have tried everything I can think of!
I pulled my old Desire out of a draw yesterday as I need it as a test device - Exactly the same situation with RADIO_V2 - FAIL-PU
I've tried so many different RUUs, but all fail... Stumped after hours and hours of messing and searching.
If anyone manages to resolve this without returning to HTC, please do post!
same here...
alas
also have same problem
tried all...
also posted about it here
no go....
hope someone can fix this..
funny thing is :
was using botrak's troubleshooting guide
and it was there that was suggested to flash android 2.3 gingerbread ruu
i think that should be mentioned to be condemned
because once you flash that you can NOT downgrade again if anything goes wrong
as is obvious from our cases!!
really hope someone cracks this!
fastboot oem boot <- That command boots the phone friends.
htc inspire has black screen with white triangles
ledzgio said:
Hi all,
I have a big problem with my desire. I was unable to start my desire (S-ON, never rooted) so I have decided to downlod RUU:
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed.exe
booted in fastboot with vol- + power and ran the above file but the process has failed so I had to reboot and since that moment I don't have fastboot menu anymore and I just see the 4 triangles screen. I can still connect phone to PC (windows 7) and run RUU file but everytime it fails with 152 error and "Radio_V2 Fail-PU" error (I can see the RUU process when I disconnect the USB cable, when I connect the cable again the RUU disappear and I see again the black screen with HTC and 4 triangles). I have also tried RUU_HTC Desire Android 2.3 Upgrade (Gingerbread).exe but no lucks.
Any suggestion on how to get my desire working again?
any help is really really appreciated,
many thanks
Click to expand...
Click to collapse
hi guys, im having the same problem with my htc inspire 4g im stuck and dont know what to do, can u plz help:crying:
jwijnaldum said:
hi guys, im having the same problem with my htc inspire 4g im stuck and dont know what to do, can u plz help:crying:
Click to expand...
Click to collapse
try posting in htc inspire 4g section
Sorry guys, service best of ur luck. My desire got this for triangles before but it is not of radio brick, it is that I've got cm7r2 hboot.....
Sent from my HTC Desire using xda app-developers app
---------- Post added at 09:29 AM ---------- Previous post was at 09:23 AM ----------
You can try flashing an individual standalone radio image from those that rom cookers provide in dev thread
Sent from my HTC Desire using xda app-developers app
For anyone who is looking for the solution or a similiar one.. just install all the drivers on the net for the htc desire (at least i installed everything i could find). Go to htcdev.com website, register for free, and get a copy of the ruu for desire gingerbread. Attach the phone to the pc, turn it on, wait until the pc recognizes the phone and get the ruu_xxx.exe running. Solved!
Hope I came useful to some one.
Another way: Relock bootloader
PHP:
fastboot oem lock
and then install the corect RUU
i bought htc desire that was lets say dead...
i can get into recovery where it says
bravo unknown ship s-on
hboot-0.93.0001
mi crop-0314
touch panel-synt0101
radio-5.11.05.27
BOOTLOADER
REBOOT
REBOOT DOWNLOADER
POWER DOWN
so i am reading all over the internet for two days now and i got stuck!
the phone hangs at boot screen when trying to turn it normal,i left it whole night long at it was stuck on a boot screen (three androids on skates in the middle of the screen)
so i tried downloading a few custom roms and naming them pb99img.zip and the phone accepts them and loads them, but when it restarts it hangs again...
how do i save this phone?
and i cant enable usb debugging because the phone wont turn on! so the RUU or unrevoked or revolutionary is not an option!is there a way to load new bootloader or something...i am lost!!!please help...
huzo said:
i bought htc desire that was lets say dead...
i can get into recovery where it says
bravo unknown ship s-on
hboot-0.93.0001
mi crop-0314
touch panel-synt0101
radio-5.11.05.27
BOOTLOADER
REBOOT
REBOOT DOWNLOADER
POWER DOWN
Click to expand...
Click to collapse
Looks like you're not in recovery there, but in Fastboot menu.
You might want to go back to bootloader menu and check if you have the recovery option.
From there maybe you can flash a working rom...
yes i can go to recovery but when i press recovery i get stuck at logo screen!and i have to pull the battery out to turn it off...
Read bortak's troubleshooting guide. Go to Desire Q&A/Stickies and down too [2] in the guide. I would read from the start tho, its a very usefull guide to know for any future problems.
Sent from my HTC Desire
jmcclue said:
Read bortak's troubleshooting guide. Go to Desire Q&A/Stickies and down too [2] in the guide. I would read from the start tho, its a very usefull guide to know for any future problems.
Click to expand...
Click to collapse
+1
Let us know if it has been useful.
i have red it already...i cant get it into recovery!!! i see only bootloader and when i press recovery it gets stuck on a logo!! never mind its probably a hardware issue ....
You are in stock recovery as you are s-on, if you want custom recovery you need s-off or flash it during rooting process via unrevoked.
Extract Rom.zip from CORRECT RUU and rename it to PB99IMG.zip and put in the root of sd card, if phone is branded and you are unable to find correct ruu, use WWE rui and goldcard, all the additional info you find in bortak's guide
Sent from my HTC Sensation XE with Beats Audio using XDA Premium App
Read it again.. go down too [2] and then down too the s-on part.
"i'm s-on, i cant boot recovery, and my phone does'nt boot" . From what i can see, thats ur problem, bortak's guide covers this. Correct me if im wrong.
Sent from my HTC Desire
i already tried bortak's guide,i am not that noob and i tried like 10 different roms and nothing,it does load the rom but when it restarts it just hangs again at boot screen
and i cannot use unrevoked or revolutionary or ruu because the phone isnt recognized by any of these programs because i didn't activate usb debugging and now the phone doesn't turn on and i can't do that,i am telling you i have spent 2 whole days reading and trying all kind of stuff and nothing helped..i think its a hardware failure of some kind....
i think it is a hardware issue because when i install drivers it says android bootloader device but it says also that device cannot start (code 10)
anyway i tried yesterday heating the MBO with hot air in my workshop(i am electric technician) i thought some chip on MBO was unsoldered but with no luck so i threw the whole thing away in the garbage!
Hi friends
I am junior here. Hope you will help me to finish my job. I received htc desire with 4 exclamation mark on each corner and no hboot menu anymore. I tried to upload different RUU but failed , finally I decide to repair it with Riff box and put supercid in it. But every time when I rung RUU 4 triangles came again. At last I repaired with riff again and now i extract rom.zip file RUU and run it in gold card but fail flashing at " Radio_V2 - Fail PU" .
I really getting mad and no point come to hand from where to start to finish this big headache . I extract and flash following files in SD card.
RUU_Bravo_HTC_Europe_1.15.405.3_Radio_32.30.00.28U _4.05.00.11_release_121865
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00. 32U_5.11.05.27_release_159811_signed
HTC_Desire_Android_2.3_Upgrade.
Its not getting into recover mode
its details are as follow.
Bravo PVT1 SHIP S-ON
HBOOT 1.02.0001(which was 0.93.000 after repair with riff)
Radio-4.06.00.02_2
pls brothers help me to the correct point. I will highly appreciate it. thanks
and regards,
hi
nsnobel2 said:
Hi friends
I am junior here. Hope you will help me to finish my job. I received htc desire with 4 exclamation mark on each corner and no hboot menu anymore. I tried to upload different RUU but failed , finally I decide to repair it with Riff box and put supercid in it. But every time when I rung RUU 4 triangles came again. At last I repaired with riff again and now i extract rom.zip file RUU and run it in gold card but fail flashing at " Radio_V2 - Fail PU" .
I really getting mad and no point come to hand from where to start to finish this big headache . I extract and flash following files in SD card.
RUU_Bravo_HTC_Europe_1.15.405.3_Radio_32.30.00.28U _4.05.00.11_release_121865
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00. 32U_5.11.05.27_release_159811_signed
HTC_Desire_Android_2.3_Upgrade.
Its not getting into recover mode
its details are as follow.
Bravo PVT1 SHIP S-ON
HBOOT 1.02.0001(which was 0.93.000 after repair with riff)
Radio-4.06.00.02_2
pls brothers help me to the correct point. I will highly appreciate it. thanks
and regards,
Click to expand...
Click to collapse
S-ON = Security ON...... which means you cant modify or rewrite in SYSTEM PROTECTED areas....
The hboot / partition table changing requires S-OFF, and Radio flashing is also writing data to SYSTEM AREAS.... So first follow a tutorial to get S-OFF, using revolutionery preferably.... Then try to upgrade Radio....
Regards
Yasir
Yasir Javed Ansari said:
S-ON = Security ON...... which means you cant modify or rewrite in SYSTEM PROTECTED areas....
The hboot / partition table changing requires S-OFF, and Radio flashing is also writing data to SYSTEM AREAS.... So first follow a tutorial to get S-OFF, using revolutionery preferably.... Then try to upgrade Radio....
Regards
Yasir
Click to expand...
Click to collapse
bro I am 100% agree with you but will gold card and supercid will not work as S-Off in flashing?
plus in revolutionary method , to gain s-off your phone must go to in main normal window otherwise it will not work.
any other solution?
nsnobel2 said:
bro I am 100% agree with you but will gold card and supercid will not work as S-Off in flashing?
plus in revolutionary method , to gain s-off your phone must go to in main normal window otherwise it will not work.
any other solution?
Click to expand...
Click to collapse
Listen, if your hboot version is 1.02, revolutionary is the only method which will work.....if you have older, use unrevoked........
To get new hboot, go to htc dev, download 2.3 gb ruu, and run it.....follow instruction, you'll get new hboot, now use simply revolutionary, it will work guaranteed....
Regards Yasir
Sent from my HTC Desire using xda app-developers app
Yasir Javed Ansari said:
Listen, if your hboot version is 1.02, revolutionary is the only method which will work.....if you have older, use unrevoked........
To get new hboot, go to htc dev, download 2.3 gb ruu, and run it.....follow instruction, you'll get new hboot, now use simply revolutionary, it will work guaranteed....
Regards Yasir
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
bro thanks for your guide. but phone is not in normal position. its hang on htc logo and for revolutionary phone must be it normal main screen to work on it. when i run it always say " connecting to device ......"
what should i don now?
Try couple of times 2.3.3 ruu as only option... If still radio brick, try freezer trick (put phone into bag and into freezer to cool down) then try ruu if no working unfortunately this is the dead end
Sent from my Sensation XE with Beats Audio Z715e
Pvt 1 model is well known for overheating mobo, maybe That is the cause of radiobrick
Sent from my Sensation XE with Beats Audio Z715e
Try changing data cable, it once happened to me during hboot flash.... Try it and tell....
Regards
Sent from my HTC Desire using xda app-developers app