Right i'm a bit of a noob at all this and have got myself in a bit too deep!!!
The problems started after applying the CM7 hboot and s-off with aplpharev. (which seemed to go OK)
After applying a new rom i got stuck in a boot loop so tried other roms from recovery and had the same problem, Nandroid also wouldn't restore.
I then decide it would be best to flash an RUU which went tits up and has lead to the black screen with 4 triangles in each corner. I have tried several other RUUs but no luck either. I also cannot boot in to recovery at all now.
When i plug and unplug the device to a pc, it gives the following info:
AlphaRev CM7 r2
Bravo PVT3 Ship S-Off
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.11.05.27
Aug 10 2010, 17:52:18
Pluging it in returns it to the black screen
I have trawled the forums but nothing seems to work (i have resorted to creating a thread after 2 days of trying things!)
Any chance of an idiots guide from a guru on how to get the device usable again? (bearing in mind my reasonably limited knowledge!)
I know there are many threads on this already but i can't seem to find a fix that works.
Ta Much
Can't look into this too much right now but I'm pretty sure your RUU flash failed because you're using the r2 version of that HBOOT which has something in it that prevents it from being over-written by the RUU. Try flashing the Downgrader HBOOT and then give the RUU a shot. Should get you back to stock.
Also, move this to the Q&A thread.
Boot in to fastboot then
plug in usb
Then run ruu. As administrator if you have windows 7/vista
Sent from my HTC Desire using XDA App
I have same problem two days ago. Mine stuck at CM7 r2 partition while RUU need 250MB of system partition. After fighting around 4hours then I try to to flash HBOOT downgrader and then flash stock HBOOT then run RUU again.
Once alive I am rooting it again again and flash custom rom since I am not satisfied with original rom hahaha..
Sorry for my bad english.
Sent from my HTC Desire using XDA App
You just need to flash the downgrader hboot to flash the ruu.. And only if you are using one of the new r2 hboots. The ruu will over write the hboot so no point in flashing the downgrader and then the stock.
Sent from my HTC Desire using XDA App
reaper7881 said:
Boot in to fastboot then
plug in usb
Then run ruu. As administrator if you have windows 7/vista
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
How do i boot to fastboot (power and vol down doesn't do anything)?
I had same problem when running ruu to return to stock from rooted, soff etc.
Just unplugged, plugged back in and re-ran ruu then everything was ok.
jordan.harris01 said:
You just need to flash the downgrader hboot to flash the ruu.. And only if you are using one of the new r2 hboots. The ruu will over write the hboot so no point in flashing the downgrader and then the stock.
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Again, may be being stupid, but how do i flash the hboot the only screen i can access is the htc and 4 triangles?
try to cool down your device and flash again...
it sounds stupid, but it works for me.
i put my device without battery in fridge for 5 minutes, then i flash again and it works.
if the device warms up it stop working.
mine have hardware fault.
br stupsi
stupsi99 said:
try to cool down your device and flash again...
it sounds stupid, but it works for me.
i put my device without battery in fridge for 5 minutes, then i flash again and it works.
if the device warms up it stop working.
mine have hardware fault.
br stupsi
Click to expand...
Click to collapse
Have actually tried this and no joy!
Hi guys I had this problem yesterday and I managed to bring back to normal just reinstall the stock hboot after you instal stock hboot restart the phone and install RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed
How I can install stock hboot if I can't get into fastboot? oO
try holding the back button instead of volume down
Sent from my HTC Desire using XDA App
No need to get in fastboot must have HTC logo on dysplay and triangles in the corners and then open the install program that hboot
the butons not working the phone is automaticaly in fastboot
en_mih said:
No need to get in fastboot must have HTC logo on dysplay and triangles in the corners and then open the install program that hboot
Click to expand...
Click to collapse
How are you installing hboot then? I am using alpharev and when i plug the device in it doesn't recognise it and just says searching for device.
open android flasher conect your phone to usb cable verify the phone to be open and then select on android flasher hboot select the stock hboot wait 1 or 2 seconds and then open the Ruuand wait and your phone is back to life
http://www.2shared.com/file/nxR9F2RN/AndroidFlasher180.html
en_mih said:
open android flasher conect your phone to usb cable verify the phone to be open and then select on android flasher hboot select the stock hboot wait 1 or 2 seconds and then open the Ruuand wait and your phone is back to life
Click to expand...
Click to collapse
You my friend are a ****ing genius!!!!
I had Android flasher sat on my desktop as well.
New hboot, new Ruu... BOOOOOOOOOOOOOOOM.......
A fully working desire again.
Please accept my sincerest thanks!
im so hapy for you man
Related
First off, I apologies for asking what might be an apparently obvious question but I'm stuck
I've read that if you can do anything with your phone then its not bricked. Well I can't seem to get into bootloader, recovery or fastboot when I turn the phone on I always get a black screen with apostrophes in each corner and HTC in the middle.
I can issue fastboot commands through USB and I can run ruu's from the PC but they always fail at the end of writing system.
Problem is I'm trying to get a warrenty return (which is why I was unrooting) and the only time I see a different screen is after running the ruu and unplugging the USB. This gives me a white screen that shows alpharev and clearly gives the game away that the phones been rooted.
So is this technically a brick? And if not, is there a way put of this?
What hboot u have? Stock? Alpharev cm/oxygen?
Sent from my HTC Desire
It was/is alpharev cm (the second one)
Flash the bravo downgrader hboot from alpharev, after the ruu.
Sent from my HTC Desire
andQlimax said:
Flash the bravo downgrader hboot from alpharev, after the ruu.
Sent from my HTC Desire
Click to expand...
Click to collapse
Thanks, but how do I flash it if I can't get into recovery or anything or is it like the original alpharev thing?
stanleywinston said:
Thanks, but how do I flash it if I can't get into recovery or anything or is it like the original alpharev thing?
Click to expand...
Click to collapse
In the same way u flashed the cm7 hboot..with fastboot command or the p99img zip in bootloader mode
Sent from my HTC Desire
andQlimax said:
In the same way u flashed the cm7 hboot..with fastboot command or the p99img zip in bootloader mode
Sent from my HTC Desire
Click to expand...
Click to collapse
OK thanks, so when I'm on the screen with just HTC on it I issue the fastboot command and then rerun the ruu?
Just to clarify (and perhaps help anyone else in this state), is this because of a change in alpharev that prevents the ruu changing tthe hboot? Because last time I returned my phone I followed the instructions that simple said to run the ruu so I'm presuming something has changed.
thanks for your help. All back up and running now.
I am trying to return my Desire to stock so that I can hand it down in the family, since i got a new GNex. while trying to run RUU during the radio flash, the phone vibrates multiple times and the RUU process fails.
Now am stuck with HTC logo and 4 "!" marks in the corners.
this is what i can see now...
this is what I see
AlphaRev Unlock (in pink)
BRAVO PVT4 SHIP S-OFF
HBOOT 6.93.9999
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO 5.17.05.23
Aug 10 2010, 17:52:19
RUU
Please help...thanks in advance
which RUU.exe did you use?
this one
RUU_Bravo_H3G_UK_1.22.771.1_Radio_32.36.00.28U_4.06.00.02_2_release_127568_signed
vmax007 said:
I am trying to return my Desire to stock so that I can hand it down in the family, since i got a new GNex. while trying to run RUU during the radio flash, the phone vibrates multiple times and the RUU process fails.
Now am stuck with HTC logo and 4 "!" marks in the corners.
this is what i can see now...
this is what I see
AlphaRev Unlock (in pink)
BRAVO PVT4 SHIP S-OFF
HBOOT 6.93.9999
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO 5.17.05.23
Aug 10 2010, 17:52:19
RUU
Please help...thanks in advance
Click to expand...
Click to collapse
have a look at the first sticky post at the top of the Q&A thread, i'm pretty sure it covers it
i did try the sticky thread... but i am not able to achieve S-ON even after flashing bravo_downgrader
Try the unsigned version of the RUU in this tread: http://forum.xda-developers.com/showthread.php?t=695667
If this doesn't work try one of the WWE versions.
EDIT: see also this thread, which discusses the same issue: http://forum.xda-developers.com/showthread.php?t=1191565
thanks for the quick replies...
i think i have moved a step forward.
Running a WWE RUU managed to move it to:
BRAVO PVT4 SHIP S-ON
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.11.05.27
Aug 10 2010,17:52:10
RUU
Running RUU again errors out saying bootloader errror...
why did you execute the RUU again?
because i couldnt do anything else .. #fml
[SOLVED]
Yaay solved the problem by downloading the android 2.3 upgrade RUU from htcdev site and now back to stock!! YES!
vmax007 said:
Yaay solved the problem by downloading the android 2.3 upgrade RUU from htcdev site and now back to stock!! YES!
Click to expand...
Click to collapse
sir I also was stuck with four '' ! '' marks. please tell me how did you solve this problem.
I'm in a real problem please help me.
thanks
Similar problem
vmax007 said:
Yaay solved the problem by downloading the android 2.3 upgrade RUU from htcdev site and now back to stock!! YES!
Click to expand...
Click to collapse
Hey guys, I had a HTC Desire that started working very strange. It was constantly freezing at the HTC logo (booting). After removing the battery for a few minutes, I could turn on the phone again. I tried rooting, it always failed. Then I tried installing 2.3 via HTC Dev official software. Followed all the instructions and had a RADIO_V2 - Fail PU. The RUU enters recovery mode: I unplug, remove battery for 3 seconds, then plug again and it runs the same procedure: RADIO_V2 - Fail PU again. I just tried 4x and nothing. The phone is bricked. If I try to boot holding volume down, it won't go to recovery, it just turns black with ! sign in all corners.
I am just afraid my Desire has some hardware problem, but in any case, now it is bricked. Any suggestions?
racery said:
Hey guys, I had a HTC Desire that started working very strange. It was constantly freezing at the HTC logo (booting). After removing the battery for a few minutes, I could turn on the phone again. I tried rooting, it always failed. Then I tried installing 2.3 via HTC Dev official software. Followed all the instructions and had a RADIO_V2 - Fail PU. The RUU enters recovery mode: I unplug, remove battery for 3 seconds, then plug again and it runs the same procedure: RADIO_V2 - Fail PU again. I just tried 4x and nothing. The phone is bricked. If I try to boot holding volume down, it won't go to recovery, it just turns black with ! sign in all corners.
I am just afraid my Desire has some hardware problem, but in any case, now it is bricked. Any suggestions?
Click to expand...
Click to collapse
You can now use your desire as a very expenive mirror.
Boot / flash recovery
racery said:
Hey guys, I had a HTC Desire that started working very strange. It was constantly freezing at the HTC logo (booting). After removing the battery for a few minutes, I could turn on the phone again. I tried rooting, it always failed. Then I tried installing 2.3 via HTC Dev official software. Followed all the instructions and had a RADIO_V2 - Fail PU. The RUU enters recovery mode: I unplug, remove battery for 3 seconds, then plug again and it runs the same procedure: RADIO_V2 - Fail PU again. I just tried 4x and nothing. The phone is bricked. If I try to boot holding volume down, it won't go to recovery, it just turns black with ! sign in all corners.
I am just afraid my Desire has some hardware problem, but in any case, now it is bricked. Any suggestions?
Click to expand...
Click to collapse
Download a recovery img for the phone, plug it in and run 'fastboot boot [recovery.img]' to boot into recovery or 'fastboot flash recovery [recovery.img] to flash and then boot into recovery.
tjsantos said:
Download a recovery img for the phone, plug it in and run 'fastboot boot [recovery.img]' to boot into recovery or 'fastboot flash recovery [recovery.img] to flash and then boot into recovery.
Click to expand...
Click to collapse
If radio bricks were that easy to solve, then this would be a better world.
Heya! I tried to go back to Stock completely. And probably messed up big time... I simply downloaded a Europe RUU from Shipped Roms and installed it on my Desire.
This is the RUU I downloaded: http://www.shipped-roms.com/downloa...io_32.30.00.28U_4.05.00.11_release_121684.exe
My HTC Desire is from Denmark, in Europe, if that matters
So, it seems like everything was installed correctly and it ended saying that it'd reboot my phone, but now it doesn't get past the logo.
I try to boot into bootloader (I think it's called? ), the power + vol down, and I can get into that. But I can't fastboot or boot into recovery... So not sure what to do from there...
I've used unRevoked to s-off and root my phone. I've been running CM7 till now.
Please help
jomik said:
Heya! I tried to go back to Stock completely. And probably messed up big time... I simply downloaded a Europe RUU from Shipped Roms and installed it on my Desire.
This is the RUU I downloaded: http://www.shipped-roms.com/downloa...io_32.30.00.28U_4.05.00.11_release_121684.exe
My HTC Desire is from Denmark, in Europe, if that matters
So, it seems like everything was installed correctly and it ended saying that it'd reboot my phone, but now it doesn't get past the logo.
I try to boot into bootloader (I think it's called? ), the power + vol down, and I can get into that. But I can't fastboot or boot into recovery... So not sure what to do from there...
I've used unRevoked to s-off and root my phone. I've been running CM7 till now.
Please help
Click to expand...
Click to collapse
Try with 2.3 RUU, or try bortak's guide.
Sent from my HTC Desire using XDA
Bortak's guide? Do you have a link? EDIT: I was looking at this; http://forum.xda-developers.com/showthread.php?t=1275632 - but I can't see what stage my phone would be at.. :/
- As I said, it won't get past the HTC logo, so the computer won't recognize it. I can't install a new RUU, I tried... :/
I don't know where I can find v. 2.3 either, I couldn't see it on shipped roms
As I said, I am stuck at the HTC screen, but I can load it up into bootloader, and when I try to go to Recovery, it just starts up at the HTC screen again, stuck.
First post hboot/fastboot screen info
2) was phone s-off prior RUU?
3) Is your phone recognised in fastboot mode via USB cable? -boot phone power+back button to fastboot, connect USB cable and run in cmd or terminal "fastboot devices" without quotes-bear in mind htc sync must be uninstalled and unrevoked drivers installed.
Sent from my Sensation XE with Beats Audio Z715e
Yeah, my phone was S-OFF and rooted when I tried to install the RUU
This is what my bootloader screen says:
-Revolutionary-
BRAVO PVT1 SHIP S-OFF
HBOOT-6.93.1002
MICROP-021d
TOUCH-PANEL-SYNT0101
RADIO-4.05.00.11
Aug 10 2010, 12:52:18
HBOOT USB PLUG
then the menu.
I get the Android Bootloader Interface pop-up on my computer when I plug it in in Bootloader.
I have uninstalled HTC Sync, but not sure if my UNrevoked drivers are still installed. Trying the power down + back button, this is in power + vol down.
When I have it in fastboot (Went from the power + vol down to the fastboot option.) it pops up as "My HTC" in my device management (I'm on Windows 7 64-bit)
It says that fastboot is an unrecognized program when I try to run it from CMD.
My desire says "FASTBOOT USB", surrounded by red color.
Have you downloaded fastboot? Go to bortak's guide and download it from resources, fastboot.zip
Sent from my Sensation XE with Beats Audio Z715e
Then download hboot downgrade from alpharev.nl, folow instructions there then you can run RUU, use 2.29.405 WWE, if not branded
Sent from my Sensation XE with Beats Audio Z715e
Okay, I installed the fastboot from Bortak's guide, installed Android SDK as well (to be safe) and went and did the alpharev.nl stuff. Flashed HBOOT Downgrader and I installed the WWE 2.29.405 RUU.
Everything's coooool and working it seems!
Thanks man
jomik said:
Okay, I installed the fastboot from Bortak's guide, installed Android SDK as well (to be safe) and went and did the alpharev.nl stuff. Flashed HBOOT Downgrader and I installed the WWE 2.29.405 RUU.
Everything's coooool and working it seems!
Thanks man
Click to expand...
Click to collapse
I am having the same problem with my Htc Desire, can you please explain in details how you solve the problems. Thanks.
pelumiv said:
I am having the same problem with my Htc Desire, can you please explain in details how you solve the problems. Thanks.
Click to expand...
Click to collapse
I was struck in this same situation about a month ago. First of all My desire was S-OFF with stock hboot at that time. This is what i did at that time:laugh:
You need to go to alpharev site and download the Bravo Downgrader. Download Fastboot commander from the forum. And boot your desire in fastboot mode and connect it to pc. And flash the bravo downgrader file via fastboot commander. And then you can install any RUU assuming your desire is unbranded if not you need to make a goldcard.
Hope this helps.
phone wont boot in any way.,!
Hi,.,
I've a spice mi-505.,with ICS in it.,! It was rooted.,!
Well at the moment.,it wont boot,,.neither in recovery mode nor in factory mode.,though it was never able to boot into recovey.,!
So all I was trying to .,is to .,boot it into recovey.,so i could learn flash roms.,.! I tried goo manager .,to intstall open recovey script.,!
goo manager kept on crashing so i flashed the img.,using flashyfy .,into the boot recovery.,! I think this is where i went wrong.,!
So.,.can any one help me.,plss.,!
Thnk in advance.,!
Hi! I know this is a well known problem and I try to read as many related topic i could find but I'm still stuck... Here's the situation:
I have a HTC Desire Bravo (european version i guess, I bought it here in Italy around 2 years ago), with definetely some overheating problems. I haven't use this phone in a long time, yesterday I turn it on and it start loading the Cyano 7 that was already install on the device. It freeze at the animation boot. After that first time it never worked again. Stuck with htc logo if I turn it on, sometimes does the 7 vibrate thing (which I come to the conclusion it's 'cause is overheating A LOT), sometimes it stuck on a reboot<-->htc logo loop untill I remove the battery.
I just want to make it run again, and maybe i'll send it to htc for the overheating, but first I need to bring it back to stock. Here's what I try:
- i flash the bravo downgrade by alpharev to bring the original partition table
- i flash a recovery, won't start (stuck with htc logo ec..ec...)
- I try the RUU, but it won't recognize the phone in hboot
- I try the pb99img method... it doesn't get recognize from the bootloader
So I am stuck with the Device in fastboot, can't get a recovery work so I can't flash any rom or ruu. If it helps, here's the hboot screen
AlphaRev Unlock
BRAVO PVT3 SHIP S-OFF
HBOOT-6 93.9999
MICROP-051d
TOUCK PANELL SYNW0101
RADIO-5.17.05.23
Click to expand...
Click to collapse
Any thoughts?:crying:
Reboot in fastboot and run 2.3 ruu.
Sent from my HTC Desire using Flashes and Thunders
nlooooo said:
Reboot in fastboot and run 2.3 ruu.
Sent from my HTC Desire using Flashes and Thunders
Click to expand...
Click to collapse
Thanks for the quick response! But how exactly am I going to do that? The PC just won't recognize the phone plug in in HBOOT, so the ruu installer fail and says he can't find the phone (ERROR 170).
Maybe i have a wrong version of hboot?
OMG i made it work!! I put it in a plastic bag in the freezer for 20min and now i'm in recovery!!! I can't believe it really work:laugh:
I did some wipe and try to install the stock rom, just to make it work, but it's stuck on "Veryfying update package", and the progress bar won't go on. Mainboard it's already burning, at least now I know it has some hardware issues.
I'm gonna try downgrade it back to factory (s-on, unroot, all original ecc..) and send it back to HTC. Do you know if the warranty is still valid considering I bought it in november 2010 and i still have the receive ?
Warranty should be 2 years from the moment you bought it.
Hello everyone.
Recently I noticed a few problems with my Desire so I decided to send it for a warranty repair, so I had to come back to stock ROM. I was on:
Oxygen ZM
hboot 6.93.1002
microp 051d
dation 4.05.00.11
I just plugged my phone in fastboot mode and opened RUU on my PC. It went through and rebooted the phone. Unfortunately, it is now stuck on splash screen with HTC logo.
I don't know what to do now. Maybe the hboot version was too high?
I was thinking about installing new ROM but can't open recovery (when I'm in fastboot and click recovery it reboots on splash screen) and also the cable doesn't work at all. Can't use adb commands or charge the battery - it just acts like it isn't plugged in.
Please help. I'm a total newbie and don't want to brick my phone (I've read that if I can reach hboot it's not as bad)
Turn off the phone n hold volume down + power and post everything it says in bootloader menu.
Sent from my HTC Desire
-revolutionary-
bravo pvt3 ship s-off
hboot-6.93.1002
microp-051d
touch panel-synt0101
radio-4.05.00.11
aug 10 2010
mightykiss said:
-revolutionary-
bravo pvt3 ship s-off
hboot-6.93.1002
microp-051d
touch panel-synt0101
radio-4.05.00.11
aug 10 2010
Click to expand...
Click to collapse
Ur still s-off so try flashing new recovery via fasboot commands. Read bortaks guide in my sig, everything u need for fastboot is there, also download the 4ext recovery PB99IMG in my sig and extract it and ul have almost the latest 4ext recovery.img, thats what ul need to flash in fastboot.
Once uv fastboot setup on ur computer, put recovery.img in ur c:\ drive on ur computer then with ur phone off, hold back button + power (thats fastboot) then plug in ur phone (usb) and open command window and type -
fastboot flash recovery c:\recovery.img
If all okay then u should have recovery.
Read bortaks guide and the guide for ADB & FASTBOOT by SUroot. Everything u need is there
Sent from my HTC Desire
hey. thanks for your help. but as I said, I can't plug in my phone with USB - when I do it, nothing happens. I can't even charge my battery.
So, I've put this zip on my SD card and the bootloader asked me to update recovery. I clicked yes and it said done. But when I try to open the recovery, it still goes into splash screen
also, I can't try a lot of combinations because my battery could discharge and that would be a problem...
Does ur phone charge when its turned off and plugged into mains (wall)? If so charge it up first
The only other way to flash recovery is by fasboot commands.
There is a way to flash an ruu via PB99IMG but id make sure ur battery is full first
Sent from my HTC Desire
no, can't charge it. as I said in first post: "also the cable doesn't work at all. Can't use adb commands or charge the battery - it just acts like it isn't plugged in."
what's now?
Looks like your cable is faulty actually
k3lcior said:
Looks like your cable is faulty actually
Click to expand...
Click to collapse
I don't think so, it worked fine until I made the RUU. It would be a huge coincidence.
so, anyone knows how to fix it?
anyone?...
c'mon! I'm sure someone can help me, it is not full brick!
U can run an ruu via PB99IMG but thats a risk coz u dont know how much battery u have left and if ur battery dies then ul probably be left with a full bricked phone
Sent from my HTC Desire
jmcclue said:
U can run an ruu via PB99IMG but thats a risk coz u dont know how much battery u have left and if ur battery dies then ul probably be left with a full bricked phone
Sent from my HTC Desire
Click to expand...
Click to collapse
OK, so I will try to charge my battery with some other device (same phone or special charger) and try to do it. How much time does it take? I have about 15% battery left because I was running RUU on 30% :laugh: (yup, that was stupid) do you think it's not enough? If it takes less than 5 mins, it should be OK.
edit: but... I've already run RUU and that's why my phone is bricked. What RUU should I run to make sure it will work? I don't know why this one didn't work. Was it because of hboot version or what?
U can use the 2.3 gb upgrade from htcdev. Heres a link to my dev host, file is there
http://d-h.st/d44
Then use Droidzones great guide
http://www.google.ie/url?sa=t&sourc...fC74BQ&usg=AFQjCNGX60VvJTy6BOBkfKsZ9maoS-A_xw
Make sure ur battery is atleast 40-50% to be safe, bootloader wont let u run it anyway if its below 30%. It should only take 5 mins but the phone will need power to boot up fully aswell.
Sent from my HTC Desire
thanks, you're just great!
I thought it won't work because my hboot is too high or something but it really helped!
one more thing, just not to make another thread. do you know why when I try to reach my recovery it shows red "!" over a phone? is there a recovery in stock soft? I want my phone to look like it was brand new. how to get rid of "revolutionary" in hboot?
ehh.. now my PC doesn't see the phone (can't use adb commands, but it's charging) - GOD, WHY?
I take it the PB99IMG worked?
What does it say in bootloader now? (vol down + power)
Sent from my HTC Desire
jmcclue said:
I take it the PB99IMG worked?
What does it say in bootloader now? (vol down + power)
Sent from my HTC Desire
Click to expand...
Click to collapse
ROM is unbranded stock but HBOOT is still alpharev 6.93.1002 s-off. I've tried to downgrade hboot from 6.93 but with no results. and still don't have recovery, just red "!"
--Alpharev--
BRAVO PVT3 SHIP s-off
HBOOT-6.93.1002
MICROP-051d
RADIO-5.17.05.23
I need to be complete stock before sending my phone for repair
Edit: managed to flash 4ext recovery, now I just need some image of stock recovery. And of course hboot issue is still up-to-date.
Flash the alpharev downgrade then run the ruu
Sent from my HTC Desire
jmcclue said:
Flash the alpharev downgrade then run the ruu
Sent from my HTC Desire
Click to expand...
Click to collapse
okay, thanks, my phone is 100% stock now excluding SIMlock. but I think they won't check it
and the recovery is OK, I just forgot that I have to hold upvol button and click power button to run it. you know, with other recoveries you don't have to do that kind of stuff.