Related
Hello
I've seen a couple threads on the issue but I find no right answer to my question. Does anybody know of a reliable, hopefully cheaper source to replace a cracked screen on a Galaxy Nexus?
I am in Spain for a while, called Samsung, they sent me to "the phone house" which required a store visit where they informed me it'd cost me 1 week wait plus 180€ for the replacement.
I find the cost excessive, only the glass needs replacement, the screen itself is working perfectly.
Do you know of any alternative, hopefully cheaper, to this?
Thanks for your help
PS: In case anyone's interested, here's the backstory: I dropped my phone on a hard surface a week ago. It was my fault as all drops are. I believe the amount of cracking is unreasonably large for the drop it took (less than 1m plus it had to yank my earbuds off, so even less "free fall energy"); it makes me think the screen was under heavy stress already and just took the slightest chance it could get a hold on to completely unravel the entropy within but that's just me.
it was also my fault not to have a bumper/case. As I said, I am in Spain right now and the cases are nonexistent in general stores but then again, my fault, should have bought online.
Pretty sure on a samoled the glass and the screen are one piece. They are fusing everything together to make it thinner.
I will post this in both Galaxy s3 sections because people need to know. This is a good read to know about their misleading advertising that their employee uncovered (unintentionally?) for me.
I am sorry I do not have any photos, because my camera just cant pick up the issues correctly...
I suggest to stay away from this product. It is not like the original invisibleshield.
It is very smooth, which is better than the original, but IT IS NOT DURABLE! The slightest pressure by my fingernail left an indent that has not gone away. I tried the same thing on my brother's original invisibleshield on his HTC Desire and it would not even leave an indent in the first place. If it flexed a little bit, it would heal itself right away.
My screen looks like I have been using the phone for 2 years! and I BABY the phone. Has always been in a case (which does not touch the screen), never shares my pocket with anything else, is face down in my pocket, hasnt been dropped yet (knock on wood) and have not bumped anything into the screen. I do not use a stylus.
I have had the protector on since June 27th and there are many indentations on the screen! It dents extremely easily and it does NOT HEAL.
I have been going back and forth with a Zagg employee in customer service and I will show the correspondence here, but I will remove his/her name.
ME
I have a new Samsung Galaxy s3 and I am wondering what the difference is between the regular invisible shield and the HD. I bought the HD and have had it installed for about 4 days now. It is very smooth which I like, but my brother has a standard invisibleshield on his HTC Desire and although it is not quite as smooth, it does not show any scratches.
The InvisibleShield HD shows scratches quite easily. I applied very light pressure with my fingernail to the corner and there was an indent. It still has not gone away since 3 days. On my brothers device, there is no indent shown as all with the same amount of pressure from my fingernail.
It seems to be less durable and more prone to damage, yet a higher price.
Click to expand...
Click to collapse
ZAGG
Thank you for contacting ZAGG, where we are Zealous About Great Gadgets! My name is Luis and I appreciate the opportunity to assist you.
Thank you for the purchase of the invisibleSHIELD. I'd like to confirm that the HD is a thinner than the original, which helps with the smoothness and clarity. However, due to the same fact, it does not absorb impact or scratches as well as the original invisibleSHIELD. It still has the original's ability to repair itself but it will take longer to do so. Furthermore, we normally recommend not to asses the quality of any invisibleSHIELD until after a couple of weeks from installation, if it was successful. This is because the adhesive is still curing on to the surface of your phone and may be more prone do damage. If the adhesive is disturbed while it's drying, it will most likely stay that way.
I would recommend to allow an extra week to determine whether or not your invisibleSHIELD will need to be replaced, which is very likely due to the curing procedure your invisibleSHIELD has endured. If so, you may place a warranty request to have a new one sent to you.
Click to expand...
Click to collapse
ME
I don't really see with what the surface of the screen protector has to do with the adhesive. The indents left in the screen protector are from absolute minimal pressure. I don't see how you are charging a premium for this product when in 2 weeks the screen will look horrendous being covered in indents.
Making it thinner but HIGHLY susceptible to indents is a terrible idea. I have also looked online briefly and I'm not the only one with this issue with the HD.
Zagg is generally known with quality products but this is crazy. A SCREEN PROTECTOR that can't withstand the smallest of pressure/contact/impact. Can you imagine if someone uses a stylus on here? I it would look like an ice rink after a week of crowds skating on it.
This product was not well thought through and I hope it is either redesigned or not made any more. My brand new phone and screen protector looks like I've owned it for over a year. (and I baby my phones. They never share a pocket with anything else, always use a case) for I have no idea how these marks could have even managed to get on there with that being said. I know only one I made on purpose to test it and it's at the bottom away from the screen, but there are many other marks on the screen. I hope it's not the COTTON FIBRES from my pocket making them...
Click to expand...
Click to collapse
ZAGG
I am sorry to hear that you feel this way. However, it is unreasonable to compare different products and expect them to perform the same as others when they are in a different category. Different products are introduced to the market to satisfy different customers and provide a wider range of protection products. There will never be a "one-size-fits-all" product from any company.
To further elaborate on the adhesive part, if you were to remove part of the adhesive, you will see a noticeable line/scratch on the bottom (adhesive) side of the invisibleSHIELD because the adhesive has been removed/disturbed/stretched. As mentioned, the invisibleSHIELD is more vulnerable to damage while it is still drying.
We have also been selling the HD invisibleSHIELD for the iPhone 4/4S and iPad 3 (3rd Gen) with great success. In the iPad 3, it is not uncommon for customers to use fine stylus, such as the JOT stylus, which has a fine point.
I believe that the reason why you are not completely satisfied with the invisibleSHIELD you own is because you are comparing it to other products, as stated. However, if you are not happy with it, I would recommend seeking assistance from the retailer it was purchased from and inquiring about their return process.
Click to expand...
Click to collapse
ME (latest)
First off I want to address your comment of "There will never be a "one-size-fits-all" product from any company. " I guess you have not heard of SGP? They Flex HD wet applicator is incredibly clear and smooth..and THIN. There are many products that are just as smooth and "glass-like" as the HD, without warping to the slightest contact. Also many other screen protector brands are excellent, from Rearth, to Ghost Armour, and on, and on.
Your interpretation seems to be that, there is no "one size fits all" because your new HD is very weak and you pretty much admitted that when you said, "Thank you for the purchase of the invisibleSHIELD. I'd like to confirm that the HD is a thinner than the original, which helps with the smoothness and clarity. However, due to the same fact, it does not absorb impact or scratches as well as the original invisibleSHIELD."
Also, this insults me even more when you tell me that, " it is unreasonable to compare different products and expect them to perform the same as others when they are in a different category"
I am surely not comparing products in a different category and I'm shocked to even see you write that... They ARE in the same category unless Zagg is magically creating their own category. It is in a wet application screen protector category. ACCORDING TO YOU though, the difference is that... its weaker... because its thinner.
That is even more interesting and let me tell you why.
Here is a link to ZAGGs post on THEIR website - http://www.zagg.com/community/blog/...-for-iphone-and-ipad-with-an-invisible-video/
Look familiar?
"We took the original invisibleSHIELD, improved the clarity, and added a glass-like surface."
Ive spent over an hour searching online through various sources and nowhere does it mention the fact that it does not absorb impact or scratches as well as the original IS. Yes the fact that is is thin is mentioned, but that fact alone should not lead someone to assume that this MORE EXPENSIVE and new product is any WEAKER than the original. If its weaker but clearer/smoother... it should be the same price!
ON SECOND HAND lets take a look at my box for the invisibleshield HD !
"THE invisibleSHIELD HD DELIVERS THE SAME PATENTED, AWARD-WINNING, AND VIRTUALLY INDESTRUCTIBLE PROTECTIVE FILM AS THE ORIGINAL PATENTED invisibleSHIELD, WITH PREMIUM FEATURES INCLUDING ADVANCED CLARITY AND A GLASS-LIKE SURFACE."
Wow, I may have just stepped on my own toes there, it does not even mention that it is thinner! Also in HUGE letters above that it says "THE ORIGINAL, MILITARY GRADE FILM NOW IN HD"
It says its the SAME FILM as the ORIGINAL, but with PREMIUM features (clarity, smoothness). This is misleading advertising at its best.
Keep in mind I purchased the shield based on reading the box in the store, and now after the fact I am searching online and still doesn't really help ZAGGs case.
What else does it say on the box? SCRATCH PROOF
It also mentions that if its ever damaged, it will be replaced for the life of the product. I think scratches/indents are considered damage and since my first email, this thing has nearly twice as many issues with it now.
I laugh at the same "nano-memory technology" on this packaging which is what you advertised on the original IS as well because NONE of the marks have gone away.
Also, interestingly enough, there is no mention of what you told me, "This is because the adhesive is still curing on to the surface of your phone and may be more prone do damage. If the adhesive is disturbed while it's drying, it will most likely stay that way."
Seriously? You dont mention that to the consumers? So this terrible screen protector will always look terrible now, You want us to leave the phone is a protective box for over a week allowing it to cure? That never happened with the original IS. This is the worst advertising for a product.
This is nothing against YOU because you did not manufacture or create the product packaging and advertising (that I know of), and you did shed some light on the misleading nature of this product for me, but don't tell me this is in a different category and that its not fair to compare to your original IS. Thats insulting my intelligence. I can read the packaging of the product sitting here in front of me that claims, again, ""THE invisibleSHIELD HD DELIVERS THE SAME PATENTED, AWARD-WINNING, AND VIRTUALLY INDESTRUCTIBLE PROTECTIVE FILM AS THE ORIGINAL PATENTED invisibleSHIELD, WITH PREMIUM FEATURES INCLUDING ADVANCED CLARITY AND A GLASS-LIKE SURFACE."
It CLEARLY says its the same, original film, but with added features. That would mean its in the same category, or if you want to play the category game, it would be in a premium category BASED ON THE PACKAGING AND ADVERTISING since it does not mention that it is weaker.
I was going to just return this to BestBuy and get them to refund the difference and just go with the original invisbleshield, but because of our correspondence which has made me look closer at the brand and its advertising for this product, I refuse to support this product. I will get a refund and purchase a better, wet protector applicator with glass like smoothness, military grade, great clarity, at a better price, and that will not indent like play-doh - and trust me, there are enough choices for this CATEGORY of screen protector on the market.
ps. this is not an isolated incidence, I have a friend who also purchased this and agrees with me.
pps. Your comment about your Apple products - if they have the same HD material that the Galaxy s3 has, I find it hard to believe that theirs arent weak as well. Although at the same time, people I know with Apple products dont really complain about any accessory they buy for them even when they break in the first week or have other faults.
I will be making these issues publicly known and voicing my displeasure with the brand and product.
Thank you and have a good day.
Click to expand...
Click to collapse
Well this is an interesting post I just read through the whole thing and I have an Inivsa HD on my SGS3 and I have loved it. I just tried to rape it with my fingernail and it rubbed right out so I don't know where your coming from but if that did happen it would be very frustrating indeed. Where did you buy it from by chance?
Brosa said:
Well this is an interesting post I just read through the whole thing and I have an Inivsa HD on my SGS3 and I have loved it. I just tried to rape it with my fingernail and it rubbed right out so I don't know where your coming from but if that did happen it would be very frustrating indeed. Where did you buy it from by chance?
Click to expand...
Click to collapse
I bought it from Best buy and even had them install it.
Because I had them install it, I have 30 days warranty on it, where they will just remove it and re-apply for me if anything is wrong with it.
I will be going and getting him to do that, and if it happens again, refund for me.
Maybe a bad batch came to Canada?
At least you can understand my frustration. It looks like I used a stylus on the shield, and I dont even own a stylus... lol
I thought everyone should know the unadvertised claims for the product at least! Its apparently thinner and weaker, and thats coming right from a Zagg employee!
EDIT: the fact that yours is fine actually frustrates me even more because he pretty much said that its perfectly normal that mine is dented. Which is clearly not true because yours is not. They cant admit a defect in even ONE film?
I had one on my GS2 and it acted the same. Never buy from them again. Over priced and feel horrible.
Sent from my GT-I9300 using xda premium
wow you pretty much owned them. +++ for this
personally i think under normal usage you will never need a sreen protector. a tpu case is more than enough.
pnda said:
wow you pretty much owned them. +++ for this
personally i think under normal usage you will never need a sreen protector. a tpu case is more than enough.
Click to expand...
Click to collapse
Thanks for that comment, I just had to take some frustration out on them. Its not fair to compare their invisibleshield HD to their invisibleshield? haha... come on!
I just like to take the extra step to ensure that if anything sharp comes in contact with the screen, it will not damage it. I put screen protectors on the screens of my digital cameras too.
Well you should be a lawyer or soething,because you sounded very smart lol.
Id end up just telling them to fu** off and want my money back haha.
Sent from my SPH-D710 using xda premium
ScubaSteev said:
Well you should be a lawyer or soething,because you sounded very smart lol.
Id end up just telling them to fu** off and want my money back haha.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Haha thanks a lot.
I will be getting my money back through Best Buy anyway, but I needed to say something to these guys about their misleading claims.
Who doesnt want a product that is as good as the original, PLUS smoother and clearer?
Well... if that was only the truth!
I'm not sure why you had such a bad experience, but I love Zagg products. I even have a Droid Razr Maxx with a Gorilla Glass screen with a Zagg InvisibleShield.
Sent from my SGH-I987 using xda app-developers app
[x] said:
I'm not sure why you had such a bad experience, but I love Zagg products. I even have a Droid Razr Maxx with a Gorilla Glass screen with a Zagg InvisibleShield.
Sent from my SGH-I987 using xda app-developers app
Click to expand...
Click to collapse
Those would be the original Invisibleshields. My brother has one on his HTC Desire and its great, but this HD one on the s3 is terrible.
Make a tl;dr for this?
Wond3r said:
I bought it from Best buy and even had them install it.
Because I had them install it, I have 30 days warranty on it, where they will just remove it and re-apply for me if anything is wrong with it.
I will be going and getting him to do that, and if it happens again, refund for me.
Maybe a bad batch came to Canada?
At least you can understand my frustration. It looks like I used a stylus on the shield, and I dont even own a stylus... lol
I thought everyone should know the unadvertised claims for the product at least! Its apparently thinner and weaker, and thats coming right from a Zagg employee!
EDIT: the fact that yours is fine actually frustrates me even more because he pretty much said that its perfectly normal that mine is dented. Which is clearly not true because yours is not. They cant admit a defect in even ONE film?
Click to expand...
Click to collapse
Honestly man the reliability of there sheilds from batch to batch is horrific. I work at Best Buy and every time I have to install a sheild I will go through at least 3 of them to find one without a defect. Sounds like an exaggeration but its the truth I write off more Invisasheilds than anything else and its not because of me boching the install its because of them seriously having a defect. Once you get a good one though they are pretty nice.
Brosa said:
Honestly man the reliability of there sheilds from batch to batch is horrific. I work at Best Buy and every time I have to install a sheild I will go through at least 3 of them to find one without a defect. Sounds like an exaggeration but its the truth I write off more Invisasheilds than anything else and its not because of me boching the install its because of them seriously having a defect. Once you get a good one though they are pretty nice.
Click to expand...
Click to collapse
The guy seemed like he did a good job, he did it right infront of me. So I guess I will try my luck on another one since I wont be paying.
They dont care that you go through that many? How much is Best Buys cost for 1 invisibleshield?
I didn't read most of this thread, or even the OP, BUT, I had an evo lte for a few weeks with the new zagg on it, hated the screen protector. Exactly what OP says about scratches and indents staying indefinitely. After 2 weeks it just looked like crap.
Sent from my SPH-L710 using Tapatalk 2
Wond3r said:
The guy seemed like he did a good job, he did it right infront of me. So I guess I will try my luck on another one since I wont be paying.
They dont care that you go through that many? How much is Best Buys cost for 1 invisibleshield?
Click to expand...
Click to collapse
No they don't care man they know that most of them are defective. The cost on the HD ones is around $6 if my memory serves me correctly its not bad but still we just send them bag to Zagg.
Very interesting to hear from a best buy guy I'd love to know what kind of defects you're talking about, and so I can look out for them when I go to get mine installed. I have a zagg booth in the mall near me, would you recommend that I get it done there, or at the best buy across the street?
Sent from my Samsung Galaxy S3 with XDA Premium
thanks for the heads up to the community. I think market is the cheapest thing to sell, rather than a good resolved product which delivers what it promises. it takes a good lot of effort to check and double check if they sold what they are saying, and i think you've done that for us regarding this brand~
ironically, bad marketing goes twice as far and three times as fast =)
Wond3r said:
I will post this in both Galaxy s3 sections because people need to know. This is a good read to know about their misleading advertising that their employee uncovered (unintentionally?) for me.
I am sorry I do not have any photos, because my camera just cant pick up the issues correctly...
I suggest to stay away from this product. It is not like the original invisibleshield.
It is very smooth, which is better than the original, but IT IS NOT DURABLE! The slightest pressure by my fingernail left an indent that has not gone away. I tried the same thing on my brother's original invisibleshield on his HTC Desire and it would not even leave an indent in the first place. If it flexed a little bit, it would heal itself right away.
My screen looks like I have been using the phone for 2 years! and I BABY the phone. Has always been in a case (which does not touch the screen), never shares my pocket with anything else, is face down in my pocket, hasnt been dropped yet (knock on wood) and have not bumped anything into the screen. I do not use a stylus.
I have had the protector on since June 27th and there are many indentations on the screen! It dents extremely easily and it does NOT HEAL.
I have been going back and forth with a Zagg employee in customer service and I will show the correspondence here, but I will remove his/her name.
ME
ZAGG
ME
ZAGG
ME (latest)
Click to expand...
Click to collapse
I can attest to this gentleman's claim!
I bought the same product and had the exact same problem. The material is almost rubber like and gets indented extremely easily. I just thew mine away after a week. Dont buy!
Advantageous said:
I can attest to this gentleman's claim!
I bought the same product and had the exact same problem. The material is almost rubber like and gets indented extremely easily. I just thew mine away after a week. Dont buy!
Click to expand...
Click to collapse
I take back all my previous claims the Invisasheild HD on the SGS3 is terrible. I am experiencing the exact same "skating rink" look and feel now after moderate use. I baby my phone like crazy and I get all of these marks on it that will not go away. My sheild was good for the first week as said but now it is like this. Not to mention I went through 3 Invisasheild HD's at my store to find this one and it turned out like this after 2 weeks. I have now gone to the Matt finish Anti-Smudge sheild and couldn't be happier. This is a real problem that Zagg has to look at. I will update with some pictures in a little here once I get my macro lens to work.
@GamerMYJ, the only advantage in my experience is BestBuy isn't afraid to go get another shield and write it off for you, well at least I'm not and it shouldn't be an exception at another store & I speak on behalf of my store in Canada.
I also have this problem my question is though if just the screen protector is damaged or is this actually also damaging my phone screen?
Hi Guys,
I recently purchased a Galaxy Nexus after spending months in front of the screen just stalking the beautiful device and wishing it lands in my hands. I finally ordered it a few weeks back. Now the next step to feed the OCD ridden alter ego was to protect the spectacular HD screen from scratches and dust. I researched a bit more, putting the quality of the film as priority, going through options to come across international brands like Zagg's Invisible Shield and Armorsuit which got great reviews from everyone in terms of clarity and protection. Naturally, they are not available in India (somehow whatever I want is not) and I was about to order it through ebay's global buy for almost double the price of what our western cousins pay when I came across the name Gadgetshieldz. I traipsed on to their site with absolutely no hope that I will be interested in any Indian brand and it'd be just another substandard product. The site had a nice look and feel and I liked the price they were offering (through ebay it is around INR 350 for the Nexus).
I felt the hole in my pocket left after buying a new phone and settled for the cheaper alternative after reading positive reviews on similar forums.
Ebay -
http://stores.ebay.in/GadgetShieldz
Main store -
GadgetShieldz Clear Cell Phone Covers and Skins | Full-Body Invisible Shields,Screen Protectors
I also Youtube-d for wet screen protection and its application to familiarize myself with the whole process. It involves the use of an already included solution (Zagg) and a Squeegee + lint free cloth (just another name for the cloth you use for cleaning your specs) to take the excess solution out.
1) Zagg Invisibleshield Application
Zagg Invisible Shield Install & Review for the Samsung Galaxy S - YouTube
2) Gadgetshield Installation and review - Part 1 and 2
(its done by a kid so bear with it or mute the audio to just absorb what is happening. Its actually better without the audio )
GadgetShieldz Installation/Review Part 1 - YouTube
GadgetShieldz installation and Review Part 2 - YouTube
3) Review by Mobile guide.
How to install a screen protector perfectly without bubbles or dust! - YouTube
The shipping was fast and through our Indian Postal Service and it reached my hands in the next 2 days. The packaging was nice and secure and I had already learnt that they do not provide any squeegee or solution and you have to arrange that yourself. Now all of this looks like a lot of homework and hassle and most of you would feel to give it a miss. Maybe I am overdoing it a bit here but I think all the effort that goes into this actually adds to the fun and satisfied feeling one gets towards the end.
After going through the instructions for the umpteenth time and reading another review - 1 and 2 I settled for the following.
Final Ingredients :
I was a bit worried about the solution regarding the water and soap ratio to be used. I must inform that all this hardly matters and you can mix 3-4 drop of mild liquid soap (I used Lifebuoy RED) and 600ml of water. Mix it thoroughly till you get a soapy feel when you dip your finger so that the shield can get a little slippery for readjustment.
The squeegee alternative is a simple card and a credit card will also do.Just make sure it is smooth. The lint free cloth is the microfiber cloth used for cleaning spectacles.
The application instructions :
The instructions are crystal clear and I personally feel they make the reader feel a little over cautious. The installation is actually simpler and faster. Well most of the settling down depends on the amount of soap used. In the instructions they ask you to soak the film in the soap solution. I found dipping the entire sheet into the solution better.
NOTE : Keep a track of where the sticky side is There were moments when I forgot where the sticky side lies.
When dipping the film in soap solution, if you allow -
more soap to stay on the film = better repositioning options and realignment. Its like setting the mouse sensitivity. This is high sensitivity and DPI. Also this means extra time for settling down.
less soap to stay on the film = faster sticking and drying up. This is like low sensitivity and DPI. The sheet will be harder to move and realign but would settle very fast and dry up faster. I chose this for the screen side as I didn't like the idea of too much soap and water loitering around my earpiece and front camera.
They are the same instructions and installation tips that are found on the main site.
The package includes a film for every possible exposed part of the device which is great but I only used the films for the screen, battery cover and the exposed part beneath the battery cover around the micro-USB port. I must mention at this point that the cuts of the films are precise and beautiful. The whole film feels sturdy and would give you the confidence that your device is going to stay safe and scratch free.
Cutting the chase here, I could not take the pictures of the phone when it was drying and what I have are the final pictures after 2 days of installation. During the installation and settling down period I was worried seeing a haze on the whole device and some marks that were left behind (I thought them to be fingerprint marks) but the results improved remarkably as time went by and after 4-5 hours the screen looked absolutely clear (and protected of course).
Final Results - Front
I faltered a bit around this area and the finish isn't exactly perfect but I marked it within the "Acceptable Marginal Error" range and proceeded.
The cut is precise and one hardly notices the film.
The screen looks quite clear and the only thing I noticed is the little dust settlement around the edges.
Taken with Brightness set to full.
The slight error in alignment is visible here but that is not to be blamed on the cuts. Just use more solutions and align to your heart's content.
Now there is a certain orange peel effect that is much talked about in case of such shields. I have taken this picture to leave it to the reader if that's the case because I am not well versed in that topic. As far as I can say, the shield is quite smooth.
Final Results - Back
The back cover of the Galaxy Nexus is a bit rough and applying the film there is both easy and a little troublesome. Easy because t doesn't involve working around any sensitive device part and I would advice that you can remove the cover entirely and apply the film. Troublesome because the squeegee doesn't move that freely around that area.
Make sure the film settles down entirely on the back case.
The package also includes film for the area around the camera as is visible.
The shields for every part is absolutely perfect and for this area its almost invisible.
Final words :
Go through the instructions thoroughly especially if its your first time.Keep all the things ready and within reach before starting. The installation is quite easy and intuitive (the links that I have provided are more than enough for getting it right). Also, some would want to settle for the easier alternative and that is a matter of choice. The shield is priced at INR 350 from ebay and one of my friend (who provided the phone to take the pictures - Galaxy S advance) also got a screen guard applied from the seller itself who charged the same amount. Below are the results and I found the Gadgetshieldz finish to be much better.
Galaxy S Advance - Samsung showroom screen guard
Galaxy Nexus - Gadgetshieldz
Another point to mention is that post application I observed a faint chemical odour emanating from the shield itself. I googled it a bit and found out that these shields are chemically treated and this is not something to lose your sleep about. As of on the third day, this odour has subsided and I am guessing it will remain the same I hope the review helps in clearing certain doubts and help my fellow forum members.
Feel free to ask any questions. Requesting more pictures is ok but it depends when I get my hands on another device for taking picture (this one is out of the whole equation now especially after I ended up comparing the finish of its screenguard to mine).
Enjoy!
Appreciate the very detailed review and write up. I wish all reviews were done like this
Gadgetshieldz
mendezj666 said:
Appreciate the very detailed review and write up. I wish all reviews were done like this
Click to expand...
Click to collapse
Thanks a lot for the feedback. Just doing my bit to assist my fellow forum members.
Thanks for the review!
I had ordered one too and have it lying at my place for a few days now. Still wondering if I should go ahead with it or not. I do have a cheap screen protector I got off ebay applied to the screen.
Gadgetshieldz
viralbug said:
Thanks for the review!
I had ordered one too and have it lying at my place for a few days now. Still wondering if I should go ahead with it or not. I do have a cheap screen protector I got off ebay applied to the screen.
Click to expand...
Click to collapse
Go ahead! :good: :good:
This one is better than the one you got besides you will get the satisfaction of doing things on your own.
I jsut followed the "If you want something to be done right, do it yourself." school of thought :angel:
It was my first time but I took it as a challenge and results were good.
Great review OP. It's nice to know that they have a new packaging as well. I used to buy their products before and they came in a regular envelop. That's the reason for the low cost. The only reason I have something else now is because I'm testing another product but I still have my set sitting in my drawer. Thanks again.
Gadgetshieldz
thephantom said:
Great review OP. It's nice to know that they have a new packaging as well. I used to buy their products before and they came in a regular envelop. That's the reason for the low cost. The only reason I have something else now is because I'm testing another product but I still have my set sitting in my drawer. Thanks again.
Click to expand...
Click to collapse
Much appreciated.Yeah in the video reviews the packaging is different indeed. The shield came enclosed in another envelope, yet the whole package was very slim and sturdy. And yes, the low cost is mostly because they do not include a squeegee and a slolution which I found acceptable as it still manages to do the job quite well.
Good review. Thank the guy, this took some time
vnvman said:
Good review. Thank the guy, this took some time
Click to expand...
Click to collapse
The pictures took more time. I was worried I would mess up the details. I think the camera made my job easy. Writing is fun so not much effort there.
Planning to get one of these. But it looks like the screen protector covers up the proximity sensor. So, does the proximity sensor work properly? Have you checked it by installing a sensor app like android sensor box.
jaksau said:
Planning to get one of these. But it looks like the screen protector covers up the proximity sensor. So, does the proximity sensor work properly? Have you checked it by installing a sensor app like android sensor box.
Click to expand...
Click to collapse
it works
Why didn't I read this topic before? I was not able to find this brand while searching for a screen guard so went ahead and ordered Zagg one from ebay global buy - 1000 INR
jaksau said:
Planning to get one of these. But it looks like the screen protector covers up the proximity sensor. So, does the proximity sensor work properly? Have you checked it by installing a sensor app like android sensor box.
Click to expand...
Click to collapse
As mentioned above, it does work and it does not affect it at all.
gauravraw said:
Why didn't I read this topic before? I was not able to find this brand while searching for a screen guard so went ahead and ordered Zagg one from ebay global buy - 1000 INR
Click to expand...
Click to collapse
That is alright. How come you got it for just 1000? Last I checked it was for around 1200+change. The good thing about your purchase would be that you will be getting a solution, squeegee and cloth already included in the package. So I guess you can be happy with that This review can be helpful in the application part. Let me know how it goes (if pictures are possible then that is great!)
ashkala said:
As mentioned above, it does work and it does not affect it at all.
That is alright. How come you got it for just 1000? Last I checked it was for around 1200+change. The good thing about your purchase would be that you will be getting a solution, squeegee and cloth already included in the package. So I guess you can be happy with that This review can be helpful in the application part. Let me know how it goes (if pictures are possible then that is great!)
Click to expand...
Click to collapse
I don't know. I woke up one and saw zagg invisibleshield floating around for 1000 bucks on ebay global buy. You're right, it used to show for 1300+ before.
So I applied it and it looks perfect!! I kind of messed up in between but thanks to the solution, took it off and re-applied. It looks just great and as tit says, almost invisible. I'll see if I can arrange pics.
Yeah pictures would be great!
I'm bumping this just because I got an email from them on a 40% discount on all skins. Not bad at all
Sent from my Galaxy Nexus using Tapatalk 2
I did a foolish, foolish thing... I promised my Mom that there were cases that would hold/keep a stylus for the new Samsung S5. I've seen many for iPhone & ASSUMED that a new flagship phone would offer similar. (yes, I know, but I was desperate to talk her out of the Note and didn't have a better idea) I have seen vids where tablet case backs are sliced carefully, and hard plastic tabs inserted into the edge of the case, with different accessories glued to the plastic tabs, quite ingenious....but how in H*ll does that help me on a PHONE case? She wants the case to hold/store the stylus. Did I mention that the standard stylus tip is too large also?? :eye rolling:
I managed to explain about the different types of screens, so she understands why a Samsung stylus only works on the Note, but she is very disappointed. To be fair, at 69 she has picked up the basics of Android in just a few months experience with a basic tablet and is kicking butt thus far with her S5. Her previous phone was a BlackBerry she had for TEN YEARS before the battery died, so I knew I had to get her the best equipment possible, VZ's BOGO on S5s came with 2 free Galaxy 7.7 tablets, all for $250, which seemed the best deal. Besides, it meant we would have the EXACT SAME phone, so her incessant questions would be easier to handle, plus a 3G tablet for vacation use as a navigation system (astounding how excited she was over that lol)
I'm new to Samsung, so I'm asking for advice, please don't make me beg! (before now, I stayed with Motorola & LG devices) I need cases & screen protector for all 4 devices, two S5's and two 7.7 tablets. I've had good luck with Zagg. I'm tough on cases tho, broke 2 Otterboxes lol. ANY and ALL ideas/suggestions happily accepted! I am quite handy, so mods are easily doable, I can sew, solder & rebuild engines! Thànks in advance for your help! :fingers-crossed:
https://www.youtube.com/watch?v=iXhw0hLmqG0
Shame to see this :/
This phone is bad, really bad. This is a shame for Huawei to do this with glass. DO NOT BUY IT! Scratches at level 3/4 WTF?!
sTefIx420 said:
https://www.youtube.com/watch?v=iXhw0hLmqG0
Shame to see this :/
Click to expand...
Click to collapse
There's already a thread for this.
https://forum.xda-developers.com/honor-6x/help/honor-6x-catastrophically-fails-t3549049
xphyle1971 said:
There's already a thread for this.
https://forum.xda-developers.com/honor-6x/help/honor-6x-catastrophically-fails-t3549049
Click to expand...
Click to collapse
You came here to promote your thread that was create after this one ? very nice
I got my phone for 200 bucks so what i'm saying next is with the price in mind:
To be honest, with the included cover the scratch issue is not that big of a deal
The bend test is an over kill. just don't sit on your phone.
This phone rocks for the price. (I'll say better than my galaxy s7) The only thing i miss is the faster lens on the s7.
The people who take JerryRigEverything's "durability tests" seriously are simply put, dumb. The videos he make are for pure entertainment purpose. Who lights up their phone's screen with a lighter? Are there still people who wouldn't protect their screen with a protector anyway? And seriously who the heck tries to bend their phone in half even if you're a rough user. Dumbness is taking over the people.
I own Honor 6X from about a month, I have about 10 hours SoT daily on my phone. With that kinda usage, I have 0 scratches so on my screen or back so far. And of course no freakin "bends" like it's a metal ruler lol.
hsn97 said:
The people who take JerryRigEverything's "durability tests" seriously are simply put, dumb. The videos he make are for pure entertainment purpose. Who lights up their phone's screen with a lighter? Are there still people who wouldn't protect their screen with a protector anyway? And seriously who the heck tries to bend their phone in half even if you're a rough user. Dumbness is taking over the people.
I own Honor 6X from about a month, I have about 10 hours SoT daily on my phone. With that kinda usage, I have 0 scratches so on my screen or back so far. And of course no freakin "bends" like it's a metal ruler lol.
Click to expand...
Click to collapse
There's no excuse for the s-h-i-tty glass used on the Honor 6x. None of the 50 phones he tested had the glass scratch at level 3 or 4. While I somewhat agree with the bending thing, the glass they used on this phone is pure crap.
xphyle1971 said:
There's no excuse for the s-h-i-tty glass used on the Honor 6x. None of the 50 phones he tested had the glass scratch at level 3 or 4. While I somewhat agree with the bending thing, the glass they used on this phone is pure crap.
Click to expand...
Click to collapse
Let me ask you something, do you use a protector for whatever current phone you own regardless of the glass type?
hsn97 said:
Let me ask you something, do you use a protector for whatever current phone you own regardless of the glass type?
Click to expand...
Click to collapse
Nope. Never. But when I saw the durability test for this device I went out and got one right away.
xphyle1971 said:
Nope. Never. But when I saw the durability test for this device I went out and got one right away.
Click to expand...
Click to collapse
If you think your phones with gorilla glass won't get scratched without a protector, you're not thinking right.
hsn97 said:
If you think your phones with gorilla glass won't get scratched without a protector, you're not thinking right.
Click to expand...
Click to collapse
It's not really about buying a screen protector or not. It's about the inferior quality of the glass Huawei chose to use on this device. It's the worst ever tested out of 50 phones and it's worse than last years 5x. I literally have a drawer full of phones and this is the first test that actually persuaded me to go out and buy a tempered glass screen protector. I never have felt the need before and the screens on all of my devices are still pristine.
xphyle1971 said:
It's not really about buying a screen protector or not. It's about the inferior quality of the glass Huawei chose to use on this device. It's the worst ever tested out of 50 phones and it's worse than last years 5x. I literally have a drawer full of phones and this is the first test that actually persuaded me to go out and buy a tempered glass screen protector. I never have felt the need before and the screens on all of my devices are still pristine.
Click to expand...
Click to collapse
Lol mate, you're taking JerryRig's stupid (meant for fun) durability tests way too seriously. His tests are not equivalent to day-to-day usage.
Fair point ?
hsn97 said:
Lol mate, you're taking JerryRig's stupid (meant for fun) durability tests way too seriously. His tests are not equivalent to day-to-day usage.
Click to expand...
Click to collapse
AGREE I DON'T TAKE HIM SERIOUSLY TOO.
But, you need to admit the fact that what ever be the day to day use of a device
there is that one day where things are not in your favor and S#!t Happens.
So, understanding the worst case scenario is not a crime but a reminder what you should expect rather.
CONSIDER:
In my **** day i accidentally drop my phone on the street while getting of a bus in INDIA and a car runs over it
now since JERRY DOES A BEND TEST BOTH THE FRONT AND BACK OF THE PHONE you will have an idea of what kind of damage you should be expecting and
if you should dive in to push your phone away
or
let it be it can handle a car running over it
and
i can get it back with no problem
iamrahilsood said:
AGREE I DON'T TAKE HIM SERIOUSLY TOO.
But, you need to admit the fact that what ever be the day to day use of a device
there is that one day where things are not in your favor and S#!t Happens.
So, understanding the worst case scenario is not a crime but a reminder what you should expect rather.
CONSIDER:
In my **** day i accidentally drop my phone on the street while getting of a bus in INDIA and a car runs over it
now since JERRY DOES A BEND TEST BOTH THE FRONT AND BACK OF THE PHONE you will have an idea of what kind of damage you should be expecting and
if you should dive in to push your phone away
or
let it be it can handle a car running over it
and
i can get it back with no problem
Click to expand...
Click to collapse
I can gurantee you that any phone you buy will become a brick if it was run over by a car. There, saved you time watching more videos. Lol
Challenge accepted !
oae08 said:
I can gurantee you that any phone you buy will become a brick if it was run over by a car. There, saved you time watching more videos. Lol
Click to expand...
Click to collapse
Why argue and waste time rather lets just ask "jerry rigs everything" to throw a google pixel and an Honor 6x under a car. Or lets do it by ourselves but someone will will need to sponsor you to get a free phone to break so yeah we cant pretty much do that can we. HONOR aint sending us a free phone anytime soon so lets see what people do when they get a free one like jerry who practically breaks the phone.
THEN WHY DO I WANT THIS ARGUMENT TO CONTINUE ?
Because my SAMSUNG E500H could manage drops like i dropped it while trying to get a clear snapchat post in a DJ snake concert it practically was being run over by people but it survived with a crack on the digitizer and leaving the LCD un harmed.
Now my HTC 526g+ that had a crappy but decent tempered glass on broke in a simple fall when i missed my pockets and drooped the phone in the METRO.
I have been a person with slippery hands when it comes to phones so it helps me know
like if i got an IPHONE 4s ill cover it in a pillow
if its an OBI WORLDPHONE i will first recollect when was Android 4.4.4 awesome and re-evaluate life's decisions.
if its an honor 6x ill buy a higher quality TEMPERED GLASS and a decent quality PROTECTIVE CASE.
( METAL BODY ALLOWS FOR SOME SERIOUS DAMAGE INTAKE ).
if it is an GOOGLE PIXEL then i can call F U C K IT and throw it screen side down under a car phones internal will be safe but screen might break.
iamrahilsood said:
Why argue and waste time rather lets just ask "jerry rigs everything" to throw a google pixel and an Honor 6x under a car. Or lets do it by ourselves but someone will will need to sponsor you to get a free phone to break so yeah we cant pretty much do that can we. HONOR aint sending us a free phone anytime soon so lets see what people do when they get a free one like jerry who practically breaks the phone.
THEN WHY DO I WANT THIS ARGUMENT TO CONTINUE ?
Because my SAMSUNG E500H could manage drops like i dropped it while trying to get a clear snapchat post in a DJ snake concert it practically was being run over by people but it survived with a crack on the digitizer and leaving the LCD un harmed.
Now my HTC 526g+ that had a crappy but decent tempered glass on broke in a simple fall when i missed my pockets and drooped the phone in the METRO.
I have been a person with slippery hands when it comes to phones so it helps me know
like if i got an IPHONE 4s ill cover it in a pillow
if its an OBI WORLDPHONE i will first recollect when was Android 4.4.4 awesome and re-evaluate life's decisions.
if its an honor 6x ill buy a higher quality TEMPERED GLASS and a decent quality PROTECTIVE CASE.
( METAL BODY ALLOWS FOR SOME SERIOUS DAMAGE INTAKE ).
if it is an GOOGLE PIXEL then i can call F U C K IT and throw it screen side down under a car phones internal will be safe but screen might break.
Click to expand...
Click to collapse
Im not sure if you are trolling or serious. Let me tell you something, a phone dropped is not similar to a car running it over. Also ive had 4 phones since the last 5 years, first was a blackberry which screen cracked from a simple fall on the street. Second was my galaxy s3 which is still in good condition despite it falling over a million times, and not to mention i still use it from time to time until this day. My newer galaxy s6 which i had a case and a tampered glass protector got its screen fully broken when it fell less than a meter high. Should we now say that samsung flagship device is really good quality (ex s3) or very bad (ex s6)? The truth is its all about how the phone fell, the angle, the type of surface there are too many variables. Now im using my honor 6x without any cover and it is still as brand new. Even though it fell maybe 2 times it still doesnt have a scratch. So chill with these videos they are nothing scientific and only for entertainment
oae08 said:
Im not sure if you are trolling or serious. Let me tell you something, a phone dropped is not similar to a car running it over. Also ive had 4 phones since the last 5 years, first was a blackberry which screen cracked from a simple fall on the street. Second was my galaxy s3 which is still in good condition despite it falling over a million times, and not to mention i still use it from time to time until this day. My newer galaxy s6 which i had a case and a tampered glass protector got its screen fully broken when it fell less than a meter high. Should we now say that samsung flagship device is really good quality (ex s3) or very bad (ex s6)? The truth is its all about how the phone fell, the angle, the type of surface there are too many variables. Now im using my honor 6x without any cover and it is still as brand new. Even though it fell maybe 2 times it still doesnt have a scratch. So chill with these videos they are nothing scientific and only for entertainment
Click to expand...
Click to collapse
Wouldn't that leave a giant variable for people who want to solve problems related to the exact matter if i consider the angle surface, ETC on which my phone drops and breaks.
I can only test my phone by droping it from a height and then fixing problems right and if we do this process over and over again we get a durable phone right.
SADLY, companies cannot spend that much on just making test models and break them over and over again to make a durable phone that costs more than a kidney
ALSO
Droping an object is not a standardized test and cannot be repeated without minimum human error.
hsn97 said:
If you think your phones with gorilla glass won't get scratched without a protector, you're not thinking right.
Click to expand...
Click to collapse
You're right, i wanna get a glass screen protector on top of the plastic one included but I'm too lazy, regardless it's still great for the price range.