Related
used the search to no avail.
SOOOO, i was looking for a privacy screen protector for my captivate.
looked on amazon, ebay, some online vendors.
i ended buying one off of ebayer belldandychan and it did a good job of limiting the viewable angle of the screen BUT, a HUGE BUT, the damn thing was so thick that it rendered the capacitive touch USELESS. the touchscreen was 100% unresponsive with the protector applied.
after exchanging a few emails with the seller, i got my money refunded (spent around 5 USD total) and threw the protector in the trash.
so, if anyone has had any experience with a good privacy screen protector for captivates that doesn't nullify the touch interface of your phone..... let me know!!
also- cost doesn't really matter to me, although i expect to probably pay no more than 10 for a small sheet of plastic.
i'm a little bit shocked there wasn't already a thread about this in the captivate accessory forum. aren't privacy screen protectors pretty vital? i just think it would be reassuring to know i'm the only one who can see what's on my screen, whether it's private personal information, emails, sms. i don't even like it when people on the bus watch me play a game. it's just a little too intimate for me. then again, even riding the bus WITH STRANGERS, who are sometimes dangerous, smell bad, have lice, are sweating like shaq at the freethrow line, etc, is sometimes a little too intimate for me.
waikuk said:
also- cost doesn't really matter to me, although i expect to probably pay no more than 10 for a small sheet of plastic.
i'm a little bit shocked there wasn't already a thread about this in the captivate accessory forum. aren't privacy screen protectors pretty vital? i just think it would be reassuring to know i'm the only one who can see what's on my screen, whether it's private personal information, emails, sms. i don't even like it when people on the bus watch me play a game. it's just a little too intimate for me. then again, even riding the bus WITH STRANGERS, who are sometimes dangerous, smell bad, have lice, are sweating like shaq at the freethrow line, etc, is sometimes a little too intimate for me.
Click to expand...
Click to collapse
I can't vouch for the quality or the transmissibility of the light through the privacy screen - but Sammy sells their own 3 pack (clear, mirror, privacy) of screen protectors:
http://www.samsung.com/us/mobile/cell-phones-accessories/ET-I897SRPGATT
If you wind up purchasing, please post a review - I've been considering this for the privacy screen myself!
LOL I love how it costs $30 and in the only review for the product on the webpage the guys says Pros: Inexpensive.
Tsk. That's that fake employee review business…
Sent from my SAMSUNG-SGH-I897 using XDA App
Although currently backordered, Clarivue has a privacy screen protector.
http://www.clarivue.com/samsung-sgh-i897-captivate-galaxy-s-privacy-screen-protector.html
I have their regular screen protector and love it, but I don't have any experience with the privacy version.
Go to any AT&T store and buy their screen protectors, they are the same as Samsung ones and cost $9.99
I see from samsung site that they have a separate screen protector called "scratch resistant"... well, since when did screen protectors giving being scratch protectants? Isn't it their basic job?
I need a privacy one not just regular finish.
And yes that is a bit redundant
Sent from my SAMSUNG-SGH-I897 using XDA App
NO ONE has used a privacy protector that didn't disable the touchscreen?
ANYONE?
Sent from my SAMSUNG-SGH-I897 using XDA App
88EVGAFTW said:
Go to any AT&T store and buy their screen protectors, they are the same as Samsung ones and cost $9.99
Click to expand...
Click to collapse
The operative word in the OP is PRIVACY............AT&T does not have the PRIVACY screen protectors.
See signature
Throw your coat over your head... Cuts down on glare and saves battery too...
Sent from my SAMSUNG-SGH-I897 using XDA App
Sqdnguns said:
The operative word in the OP is PRIVACY............AT&T does not have the PRIVACY screen protectors.
See signature
Click to expand...
Click to collapse
Thanks Capt. Obvious
My wife had a mirror screen protector on her captivate for a bit. It too was thick and her back button worked about 5% of the time. She has since taken it off and went back to a standard screen protector. I think you might run into the same issues with most "privacy" protectors.
Dave
Hmmmm
Buy a phone noted for its bright, wide viewing angle screen, Then complain that other people can see.
Maybe you should have got a phone with a smaller dimmer lcd screen
I will post this in both Galaxy s3 sections because people need to know. This is a good read to know about their misleading advertising that their employee uncovered (unintentionally?) for me.
I am sorry I do not have any photos, because my camera just cant pick up the issues correctly...
I suggest to stay away from this product. It is not like the original invisibleshield.
It is very smooth, which is better than the original, but IT IS NOT DURABLE! The slightest pressure by my fingernail left an indent that has not gone away. I tried the same thing on my brother's original invisibleshield on his HTC Desire and it would not even leave an indent in the first place. If it flexed a little bit, it would heal itself right away.
My screen looks like I have been using the phone for 2 years! and I BABY the phone. Has always been in a case (which does not touch the screen), never shares my pocket with anything else, is face down in my pocket, hasnt been dropped yet (knock on wood) and have not bumped anything into the screen. I do not use a stylus.
I have had the protector on since June 27th and there are many indentations on the screen! It dents extremely easily and it does NOT HEAL.
I have been going back and forth with a Zagg employee in customer service and I will show the correspondence here, but I will remove his/her name.
ME
I have a new Samsung Galaxy s3 and I am wondering what the difference is between the regular invisible shield and the HD. I bought the HD and have had it installed for about 4 days now. It is very smooth which I like, but my brother has a standard invisibleshield on his HTC Desire and although it is not quite as smooth, it does not show any scratches.
The InvisibleShield HD shows scratches quite easily. I applied very light pressure with my fingernail to the corner and there was an indent. It still has not gone away since 3 days. On my brothers device, there is no indent shown as all with the same amount of pressure from my fingernail.
It seems to be less durable and more prone to damage, yet a higher price.
Click to expand...
Click to collapse
ZAGG
Thank you for contacting ZAGG, where we are Zealous About Great Gadgets! My name is Luis and I appreciate the opportunity to assist you.
Thank you for the purchase of the invisibleSHIELD. I'd like to confirm that the HD is a thinner than the original, which helps with the smoothness and clarity. However, due to the same fact, it does not absorb impact or scratches as well as the original invisibleSHIELD. It still has the original's ability to repair itself but it will take longer to do so. Furthermore, we normally recommend not to asses the quality of any invisibleSHIELD until after a couple of weeks from installation, if it was successful. This is because the adhesive is still curing on to the surface of your phone and may be more prone do damage. If the adhesive is disturbed while it's drying, it will most likely stay that way.
I would recommend to allow an extra week to determine whether or not your invisibleSHIELD will need to be replaced, which is very likely due to the curing procedure your invisibleSHIELD has endured. If so, you may place a warranty request to have a new one sent to you.
Click to expand...
Click to collapse
ME
I don't really see with what the surface of the screen protector has to do with the adhesive. The indents left in the screen protector are from absolute minimal pressure. I don't see how you are charging a premium for this product when in 2 weeks the screen will look horrendous being covered in indents.
Making it thinner but HIGHLY susceptible to indents is a terrible idea. I have also looked online briefly and I'm not the only one with this issue with the HD.
Zagg is generally known with quality products but this is crazy. A SCREEN PROTECTOR that can't withstand the smallest of pressure/contact/impact. Can you imagine if someone uses a stylus on here? I it would look like an ice rink after a week of crowds skating on it.
This product was not well thought through and I hope it is either redesigned or not made any more. My brand new phone and screen protector looks like I've owned it for over a year. (and I baby my phones. They never share a pocket with anything else, always use a case) for I have no idea how these marks could have even managed to get on there with that being said. I know only one I made on purpose to test it and it's at the bottom away from the screen, but there are many other marks on the screen. I hope it's not the COTTON FIBRES from my pocket making them...
Click to expand...
Click to collapse
ZAGG
I am sorry to hear that you feel this way. However, it is unreasonable to compare different products and expect them to perform the same as others when they are in a different category. Different products are introduced to the market to satisfy different customers and provide a wider range of protection products. There will never be a "one-size-fits-all" product from any company.
To further elaborate on the adhesive part, if you were to remove part of the adhesive, you will see a noticeable line/scratch on the bottom (adhesive) side of the invisibleSHIELD because the adhesive has been removed/disturbed/stretched. As mentioned, the invisibleSHIELD is more vulnerable to damage while it is still drying.
We have also been selling the HD invisibleSHIELD for the iPhone 4/4S and iPad 3 (3rd Gen) with great success. In the iPad 3, it is not uncommon for customers to use fine stylus, such as the JOT stylus, which has a fine point.
I believe that the reason why you are not completely satisfied with the invisibleSHIELD you own is because you are comparing it to other products, as stated. However, if you are not happy with it, I would recommend seeking assistance from the retailer it was purchased from and inquiring about their return process.
Click to expand...
Click to collapse
ME (latest)
First off I want to address your comment of "There will never be a "one-size-fits-all" product from any company. " I guess you have not heard of SGP? They Flex HD wet applicator is incredibly clear and smooth..and THIN. There are many products that are just as smooth and "glass-like" as the HD, without warping to the slightest contact. Also many other screen protector brands are excellent, from Rearth, to Ghost Armour, and on, and on.
Your interpretation seems to be that, there is no "one size fits all" because your new HD is very weak and you pretty much admitted that when you said, "Thank you for the purchase of the invisibleSHIELD. I'd like to confirm that the HD is a thinner than the original, which helps with the smoothness and clarity. However, due to the same fact, it does not absorb impact or scratches as well as the original invisibleSHIELD."
Also, this insults me even more when you tell me that, " it is unreasonable to compare different products and expect them to perform the same as others when they are in a different category"
I am surely not comparing products in a different category and I'm shocked to even see you write that... They ARE in the same category unless Zagg is magically creating their own category. It is in a wet application screen protector category. ACCORDING TO YOU though, the difference is that... its weaker... because its thinner.
That is even more interesting and let me tell you why.
Here is a link to ZAGGs post on THEIR website - http://www.zagg.com/community/blog/...-for-iphone-and-ipad-with-an-invisible-video/
Look familiar?
"We took the original invisibleSHIELD, improved the clarity, and added a glass-like surface."
Ive spent over an hour searching online through various sources and nowhere does it mention the fact that it does not absorb impact or scratches as well as the original IS. Yes the fact that is is thin is mentioned, but that fact alone should not lead someone to assume that this MORE EXPENSIVE and new product is any WEAKER than the original. If its weaker but clearer/smoother... it should be the same price!
ON SECOND HAND lets take a look at my box for the invisibleshield HD !
"THE invisibleSHIELD HD DELIVERS THE SAME PATENTED, AWARD-WINNING, AND VIRTUALLY INDESTRUCTIBLE PROTECTIVE FILM AS THE ORIGINAL PATENTED invisibleSHIELD, WITH PREMIUM FEATURES INCLUDING ADVANCED CLARITY AND A GLASS-LIKE SURFACE."
Wow, I may have just stepped on my own toes there, it does not even mention that it is thinner! Also in HUGE letters above that it says "THE ORIGINAL, MILITARY GRADE FILM NOW IN HD"
It says its the SAME FILM as the ORIGINAL, but with PREMIUM features (clarity, smoothness). This is misleading advertising at its best.
Keep in mind I purchased the shield based on reading the box in the store, and now after the fact I am searching online and still doesn't really help ZAGGs case.
What else does it say on the box? SCRATCH PROOF
It also mentions that if its ever damaged, it will be replaced for the life of the product. I think scratches/indents are considered damage and since my first email, this thing has nearly twice as many issues with it now.
I laugh at the same "nano-memory technology" on this packaging which is what you advertised on the original IS as well because NONE of the marks have gone away.
Also, interestingly enough, there is no mention of what you told me, "This is because the adhesive is still curing on to the surface of your phone and may be more prone do damage. If the adhesive is disturbed while it's drying, it will most likely stay that way."
Seriously? You dont mention that to the consumers? So this terrible screen protector will always look terrible now, You want us to leave the phone is a protective box for over a week allowing it to cure? That never happened with the original IS. This is the worst advertising for a product.
This is nothing against YOU because you did not manufacture or create the product packaging and advertising (that I know of), and you did shed some light on the misleading nature of this product for me, but don't tell me this is in a different category and that its not fair to compare to your original IS. Thats insulting my intelligence. I can read the packaging of the product sitting here in front of me that claims, again, ""THE invisibleSHIELD HD DELIVERS THE SAME PATENTED, AWARD-WINNING, AND VIRTUALLY INDESTRUCTIBLE PROTECTIVE FILM AS THE ORIGINAL PATENTED invisibleSHIELD, WITH PREMIUM FEATURES INCLUDING ADVANCED CLARITY AND A GLASS-LIKE SURFACE."
It CLEARLY says its the same, original film, but with added features. That would mean its in the same category, or if you want to play the category game, it would be in a premium category BASED ON THE PACKAGING AND ADVERTISING since it does not mention that it is weaker.
I was going to just return this to BestBuy and get them to refund the difference and just go with the original invisbleshield, but because of our correspondence which has made me look closer at the brand and its advertising for this product, I refuse to support this product. I will get a refund and purchase a better, wet protector applicator with glass like smoothness, military grade, great clarity, at a better price, and that will not indent like play-doh - and trust me, there are enough choices for this CATEGORY of screen protector on the market.
ps. this is not an isolated incidence, I have a friend who also purchased this and agrees with me.
pps. Your comment about your Apple products - if they have the same HD material that the Galaxy s3 has, I find it hard to believe that theirs arent weak as well. Although at the same time, people I know with Apple products dont really complain about any accessory they buy for them even when they break in the first week or have other faults.
I will be making these issues publicly known and voicing my displeasure with the brand and product.
Thank you and have a good day.
Click to expand...
Click to collapse
Well this is an interesting post I just read through the whole thing and I have an Inivsa HD on my SGS3 and I have loved it. I just tried to rape it with my fingernail and it rubbed right out so I don't know where your coming from but if that did happen it would be very frustrating indeed. Where did you buy it from by chance?
Brosa said:
Well this is an interesting post I just read through the whole thing and I have an Inivsa HD on my SGS3 and I have loved it. I just tried to rape it with my fingernail and it rubbed right out so I don't know where your coming from but if that did happen it would be very frustrating indeed. Where did you buy it from by chance?
Click to expand...
Click to collapse
I bought it from Best buy and even had them install it.
Because I had them install it, I have 30 days warranty on it, where they will just remove it and re-apply for me if anything is wrong with it.
I will be going and getting him to do that, and if it happens again, refund for me.
Maybe a bad batch came to Canada?
At least you can understand my frustration. It looks like I used a stylus on the shield, and I dont even own a stylus... lol
I thought everyone should know the unadvertised claims for the product at least! Its apparently thinner and weaker, and thats coming right from a Zagg employee!
EDIT: the fact that yours is fine actually frustrates me even more because he pretty much said that its perfectly normal that mine is dented. Which is clearly not true because yours is not. They cant admit a defect in even ONE film?
I had one on my GS2 and it acted the same. Never buy from them again. Over priced and feel horrible.
Sent from my GT-I9300 using xda premium
wow you pretty much owned them. +++ for this
personally i think under normal usage you will never need a sreen protector. a tpu case is more than enough.
pnda said:
wow you pretty much owned them. +++ for this
personally i think under normal usage you will never need a sreen protector. a tpu case is more than enough.
Click to expand...
Click to collapse
Thanks for that comment, I just had to take some frustration out on them. Its not fair to compare their invisibleshield HD to their invisibleshield? haha... come on!
I just like to take the extra step to ensure that if anything sharp comes in contact with the screen, it will not damage it. I put screen protectors on the screens of my digital cameras too.
Well you should be a lawyer or soething,because you sounded very smart lol.
Id end up just telling them to fu** off and want my money back haha.
Sent from my SPH-D710 using xda premium
ScubaSteev said:
Well you should be a lawyer or soething,because you sounded very smart lol.
Id end up just telling them to fu** off and want my money back haha.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Haha thanks a lot.
I will be getting my money back through Best Buy anyway, but I needed to say something to these guys about their misleading claims.
Who doesnt want a product that is as good as the original, PLUS smoother and clearer?
Well... if that was only the truth!
I'm not sure why you had such a bad experience, but I love Zagg products. I even have a Droid Razr Maxx with a Gorilla Glass screen with a Zagg InvisibleShield.
Sent from my SGH-I987 using xda app-developers app
[x] said:
I'm not sure why you had such a bad experience, but I love Zagg products. I even have a Droid Razr Maxx with a Gorilla Glass screen with a Zagg InvisibleShield.
Sent from my SGH-I987 using xda app-developers app
Click to expand...
Click to collapse
Those would be the original Invisibleshields. My brother has one on his HTC Desire and its great, but this HD one on the s3 is terrible.
Make a tl;dr for this?
Wond3r said:
I bought it from Best buy and even had them install it.
Because I had them install it, I have 30 days warranty on it, where they will just remove it and re-apply for me if anything is wrong with it.
I will be going and getting him to do that, and if it happens again, refund for me.
Maybe a bad batch came to Canada?
At least you can understand my frustration. It looks like I used a stylus on the shield, and I dont even own a stylus... lol
I thought everyone should know the unadvertised claims for the product at least! Its apparently thinner and weaker, and thats coming right from a Zagg employee!
EDIT: the fact that yours is fine actually frustrates me even more because he pretty much said that its perfectly normal that mine is dented. Which is clearly not true because yours is not. They cant admit a defect in even ONE film?
Click to expand...
Click to collapse
Honestly man the reliability of there sheilds from batch to batch is horrific. I work at Best Buy and every time I have to install a sheild I will go through at least 3 of them to find one without a defect. Sounds like an exaggeration but its the truth I write off more Invisasheilds than anything else and its not because of me boching the install its because of them seriously having a defect. Once you get a good one though they are pretty nice.
Brosa said:
Honestly man the reliability of there sheilds from batch to batch is horrific. I work at Best Buy and every time I have to install a sheild I will go through at least 3 of them to find one without a defect. Sounds like an exaggeration but its the truth I write off more Invisasheilds than anything else and its not because of me boching the install its because of them seriously having a defect. Once you get a good one though they are pretty nice.
Click to expand...
Click to collapse
The guy seemed like he did a good job, he did it right infront of me. So I guess I will try my luck on another one since I wont be paying.
They dont care that you go through that many? How much is Best Buys cost for 1 invisibleshield?
I didn't read most of this thread, or even the OP, BUT, I had an evo lte for a few weeks with the new zagg on it, hated the screen protector. Exactly what OP says about scratches and indents staying indefinitely. After 2 weeks it just looked like crap.
Sent from my SPH-L710 using Tapatalk 2
Wond3r said:
The guy seemed like he did a good job, he did it right infront of me. So I guess I will try my luck on another one since I wont be paying.
They dont care that you go through that many? How much is Best Buys cost for 1 invisibleshield?
Click to expand...
Click to collapse
No they don't care man they know that most of them are defective. The cost on the HD ones is around $6 if my memory serves me correctly its not bad but still we just send them bag to Zagg.
Very interesting to hear from a best buy guy I'd love to know what kind of defects you're talking about, and so I can look out for them when I go to get mine installed. I have a zagg booth in the mall near me, would you recommend that I get it done there, or at the best buy across the street?
Sent from my Samsung Galaxy S3 with XDA Premium
thanks for the heads up to the community. I think market is the cheapest thing to sell, rather than a good resolved product which delivers what it promises. it takes a good lot of effort to check and double check if they sold what they are saying, and i think you've done that for us regarding this brand~
ironically, bad marketing goes twice as far and three times as fast =)
Wond3r said:
I will post this in both Galaxy s3 sections because people need to know. This is a good read to know about their misleading advertising that their employee uncovered (unintentionally?) for me.
I am sorry I do not have any photos, because my camera just cant pick up the issues correctly...
I suggest to stay away from this product. It is not like the original invisibleshield.
It is very smooth, which is better than the original, but IT IS NOT DURABLE! The slightest pressure by my fingernail left an indent that has not gone away. I tried the same thing on my brother's original invisibleshield on his HTC Desire and it would not even leave an indent in the first place. If it flexed a little bit, it would heal itself right away.
My screen looks like I have been using the phone for 2 years! and I BABY the phone. Has always been in a case (which does not touch the screen), never shares my pocket with anything else, is face down in my pocket, hasnt been dropped yet (knock on wood) and have not bumped anything into the screen. I do not use a stylus.
I have had the protector on since June 27th and there are many indentations on the screen! It dents extremely easily and it does NOT HEAL.
I have been going back and forth with a Zagg employee in customer service and I will show the correspondence here, but I will remove his/her name.
ME
ZAGG
ME
ZAGG
ME (latest)
Click to expand...
Click to collapse
I can attest to this gentleman's claim!
I bought the same product and had the exact same problem. The material is almost rubber like and gets indented extremely easily. I just thew mine away after a week. Dont buy!
Advantageous said:
I can attest to this gentleman's claim!
I bought the same product and had the exact same problem. The material is almost rubber like and gets indented extremely easily. I just thew mine away after a week. Dont buy!
Click to expand...
Click to collapse
I take back all my previous claims the Invisasheild HD on the SGS3 is terrible. I am experiencing the exact same "skating rink" look and feel now after moderate use. I baby my phone like crazy and I get all of these marks on it that will not go away. My sheild was good for the first week as said but now it is like this. Not to mention I went through 3 Invisasheild HD's at my store to find this one and it turned out like this after 2 weeks. I have now gone to the Matt finish Anti-Smudge sheild and couldn't be happier. This is a real problem that Zagg has to look at. I will update with some pictures in a little here once I get my macro lens to work.
@GamerMYJ, the only advantage in my experience is BestBuy isn't afraid to go get another shield and write it off for you, well at least I'm not and it shouldn't be an exception at another store & I speak on behalf of my store in Canada.
I also have this problem my question is though if just the screen protector is damaged or is this actually also damaging my phone screen?
This is Part 1 of review for Seidio VITREO Tempered Glass screen protector. http://www.seidioonline.com/samsung-galaxy-note-2-vitreo-screen-guard-p/sptssgt2-cl.htm
I decided to review it in 2 parts. At the current moment I'm not ready to install it yet, so in Part 1 of the review I will go over what's in a box, and how it fits on top of the screen prior to installation. Plus, I took a lot of pictures for you to get a better idea.
My screen protector experience is based purely on dry installs where I typically prefer 3H hardness-rated PET film. I always look at screen protector as disposable/replaceable option because even the best one will get scratches at some point. Typically it won't happen on a daily basis with a regular use, but one of these days when you forget and end up with keys rubbing against your screen protector in the pocket, or while you are yanking the phone out of the zippered pocket brushing against screen protector, etc. Those times call for tempered glass material which is a lot more durable (typically 9H hardness) and more impact absorbing on a direct contact with a screen. And of course, glass will feel like a glass!!! It will cost more, but perhaps will last a lifetime of the phone so you don't have to replace/buy more regular screen protectors. Of course, this is really like a premium luxury option lol!!!
I have read a number of reviews for other tempered glass screen protectors and found one common problem. Its a glass which has less flexibility than a plastic screen protector, and in combination with curved Note 2 glass - a lot of people complain about edges not sticking with their other screen protectors. Furthermore, I noticed some designs use completely enclosed cutout around Home button, and in conjunction with thickness of the tempered glass you will actually need to add a stick-on Home button to raise it up so it doesn't feel recessed. So with all that in mind, I decided to give it a shot to Seidio VITREO tempered glass. To quote their spec:
- High grade tempered glass with a 9H hardness rating prevents damage in the event of scratches and abrasions
- Tapered (rounded) edges provide a premium and more aesthetically enhanced profile for your device
- Engineered to reinforce the strength of the critical points of impact which results in prolonged durability
- Oleophobic coating resists marks and smudges with advanced technology that reduces the appearance of fingerprints
- Designed precisely for your device with slim cut to prevent bubbling around edges
- Allows touch sensitivity and enhances optical clarity
- Easy installation without bubbling and lifting
- Only 0.55mm (0.02in) thin
As I mentioned already, I haven't installed it yet, so can't judge about touch sensitivity, optical clarify, and oleophobic characteristic yet. That will be included in Part 2 of the review (probably in a week). What I can tell you is that it feels very solid, kind of reminds me of thin plexiglass. Edges are rounded/tapered off. It's very lightweight. And it definitely has a VERY slim cut. I mean, it's so slim that it ONLY covers visible display part of the screen. I tried to take close up pics so you can see it. I guess Seidio decided not to take any chances with lifting edges, thus covering only flat part of the screen. In theory that is the only part of the screen where you glide your finger anyway. But at the same time having almost no margin will mean that you have to be VERY careful during install because you don't have any wiggle space. As I read in some other threads, this would be a good opportunity to use one of those suction cups to hold the tempered glass while lowering it down and aligning with a screen. Otherwise if you hold it by the edges with your fingers, you won't be able to align it precisely.
So here you go, pre-install pictures for your enjoyment!!! Feel free to comment if you have experience with VITREO or to suggest tips for tempered glass installation since I'm noob in that area
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OK, for those who cares here are the pictures after the install and few of my comments!
Since this is my first tempered glass install, I actually found it to be easier because with a sturdier piece of glass, versus a typical dry install flexible screen protector, it's easier to hold it in your hands while positioning. Most of the positioning work goes into trying to align it with visible part of the display. Unfortunately, the width of this glass is probably 1mm wider than visible area of the screen so its not an easy task. If you don't have a steady hand or OCD, forget about it lol!!! Looked like the sticky side has some kind of a glue substance. I didn't see much of a bubbles, but noticed what seems to be like "wet" spots. I tried my best massaging it out, but probably at least a dozen still remain. When you put a pressure on it - it disappears, but then it's back. I read enough of the other tempered glass threads to realize that I probably will have to wait a few days to see how it goes. Again, speaking from a previous dry install experience where within minutes I get a perfect sp on contact - it looks to me tempered glass is not for those who want instant gratification. I will wait and see the progress, or lack of it, how these disappear. Will post updates and pictures as well. They just don't look like typical bubbles, but rather wet/glue spots.
About the glass itself. Edges are very nicely rounded off and VERY smooth. While sliding the finger over the edge you feel a very smooth transition. Thickness of the glass is higher than Home button, so the button feels a little bit recessed. Doesn't feel too bad since Home button opening is not enclosed. But if/once there is no wet spots and I decide to keep this permanently, I might consider Home button sticker. But as of now, I don't feel it's necessary. Once display is on, you don't see any wet spots at all. Everything is crystal clear, colors come through like with original glass screen, and it feels like a real smooth glass. S-pen glides smoothly too. Overall touch sensitivity and feeling is like you have an original glass display. Also, doesn't pick up too much fingerprints.
I will post an update and pictures in a few days how it looks, and hopefully those spots will disappear. As I said, they do not interfere with display on, but when it's off - its visible. At this point I will wait and see.
Here are the pictures. I tried my best to get every edge in focus since its not easy with a clear glass.
OK, so here is the-morning-after UPDATE. I run my finger across the screen and every wet spot just disappeared!!!!!! This is a picture of PERFECTION!!! No bubbles, no spots, no lifting edges, just perfect and smooth. The only comment, since it has oleophobic coating, glass feels a little slippery right now which noticeable when you need to press'n'hold while using the phone (like press'n'hold on the link to open in another window of the browser). I believe that will wear off since it's a brand new layer of coating.
Here are the final updated pictures. This one is a KEEPER!!!
I know that the edge of the Note2 glass curves downward near the edges, but having a lip like that with the protective glass would be very annoying imo.
I have no idea what to expect when I install it. I know it's tapered off, so perhaps the transition won't be as bad sliding a finger across the edge? I would have installed it right away, but I have another screen protector (regular PET film) coming my way for review, and I want to install this tempered glass afterwards.
I promise to give you my honest opinion. Just honestly don't know what to expect or even what to compare it to since I have never installed or tried tempered glass screen protectors before. I will leave it up to you guys to read my review and compare it with other reviews in this forum to figure out if it works for you or not. Hopefully pictures can do some justice as well, since those worth thousand words
Also, I do realized it is on a pricey side in comparison to other ones, and someone already mentioned ebay options. But having a previous bad experience with cheap ebay film screen protectors I learned my lesson and would rather deal with brand names. Ebay cheap stuff comes off mass production lines with hardly any quality control.
The pictures look great and show great detail, but personally, I can't justify $40 for a screen protector, no matter how good. I'm very careful with my phones and have never broken or significantly damaged one and I've switched through about 7 phones in the last 5 years so I'm knocking on wood here.
Sadly, most of the "brand name" accessories probably come off the same production line as the cheap ebay stuff, but don't get the fancy name and packaging as the stuff you pay 2-3x more for.
That was a lot of words for a pre-install. Brevity is your friend.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Deleted
LittleRedDot said:
That was a lot of words for a pre-install. Brevity is your friend.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
Oh, you have not seen everything yet, this was my short review lol! If you want to kill a few hours, read all of my reviews in signature link. You know I get paid per word? lol!
Btw, thanks for insightful reply/comment!
LittleRedDot said:
That was a lot of words for a pre-install. Brevity is your friend.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
Don't chastise vector for his verbosity! I appreciate how much time and detail he puts into his reviews. It's not like he's a paid reviewer. If you don't like it, move on to something else which doesn't force you to read so much.
Sent from my SCH-I605 using xda premium
*drops phone*
screen protector shatters glass into my glass screen which in turn shatters
*wtf'd*
Just ordered one. $60 case, $50 screen protector. Sheesh. This is why I work so much overtime!
Hey, I got thick skin Listen guys, I'm not on payroll or invested in stock of these companies. Don't care if you buy or not these products. I'm just here to help. I do spend considerable amount of time on these reviews and typically have a format of lots of "text" and lots of "pictures". I don't mix it together 'cause different browsers/app-forum viewer scale/resize and mess it up. If you don't want to read my view, I always provide a link to a vendors site where you can read a brief summary. If you have a few minutes to kill - read my thoughts about it. And as usual I provide all the detailed pictures to cover every angle - and those worth at least a thousand words If you don't like it, just skip it - no need to complain. If you appreciate my work hit Thanks. If you have positive or negative comment about the product - it's what this forum is for, to discuss our opinion and have civilized conversation!
Check out Post #2 after the original one. I updated with my comments about the install and lot's of pictures how it looks now!!!
Here is a final update of VITREO Tempered Glass install. I picture of PERFECTION!!!!!!!! I also updated my original post for consistency.
Hey, I appreciate the review and most importantly the quality pictures.
I'll throw in my feedback on this thread if you don't mind.
That is once mine arrives later today.
looks good might have to cop one..
Again, great review bro. Everyone else who hates or undermines your reviews are either 1) too lazy to read 2) are jealous that you can afford such things ( even though it's just to share and help others) 3) are trolls. So, don't even pay attention to them. Also, the fact that you handled such comments maturely makes you the better person, my friend. This is XDA - a community to help each other rate/review/discuss everything in a positive manner. You can hate a product, but don't bash an individual (especially one who has nothing to gain by helping you). Everyone has an opinion, but the same message can be said in a kinder, more respectful tone. If anyone wants to bash what I said, feel free, but you'll just prove my point
apallohadas said:
Hey, I appreciate the review and most importantly the quality pictures.
I'll throw in my feedback on this thread if you don't mind.
That is once mine arrives later today.
Click to expand...
Click to collapse
Of course, I would be happy if you post your comments!
One thing for install, I actually used provided alcohol swipe. Gotta get screen super clean and remove any oil fingerprint residue. I didn't want to take any chances. Also, I started alignment from top of the phone, just worked better for me. Prior to alignment play around with placement of the glass to figure out how to align it. It will be almost as wide as LCD part of the screen, so you need to get it right. Since I have white Note 2, I could see it better due to contrast with white bezel of the phone. But once installed right, it make it looks nice because the end of the glass is almost aligned with the edge of black LCD/white bezel. Good luck!
opasha said:
Again, great review bro. Everyone else who hates or undermines your reviews are either 1) too lazy to read 2) are jealous that you can afford such things ( even though it's just to share and help others) 3) are trolls. So, don't even pay attention to them. Also, the fact that you handled such comments maturely makes you the better person, my friend. This is XDA - a community to help each other rate/review/discuss everything in a positive manner. You can hate a product, but don't bash an individual (especially one who has nothing to gain by helping you). Everyone has an opinion, but the same message can be said in a kinder, more respectful tone. If anyone wants to bash what I said, feel free, but you'll just prove my point
Click to expand...
Click to collapse
Thanks bro, and everybody else for kind words! I do my best to handle my replies maturely lol!!! Sh!t like that doesn't fly in forums where I'm moderating Plus, I provide links of my reviews back to the vendors because they like to read feedback and also comments from other users. XDA-Developers community held in a VERY HIGH respect with every vendor I communicate. I'm not representing vendors, but in some way I feel like I representing XDA community in a face of the vendor. I don't have to sugar coat my review, I try to present facts and support it with pictures. There are too many YT and Blog reviews where every single product is "great" and "must have" and they just read description bullets off vendors website. I'm honestly telling you that tempered glass is NOT for everybody, and its an expensive accessory. But if you decide to go with one then do your homework and read other comments on this forum. It's a big investment and you want it to work right
Also, about being able to afford such things. Just please don't take it in a cocky way, but with amount of reviews I have posted, amount of time I spend on it, and feedbacks I provided back in direct email communication with vendors, I earned their trust and respect to receive review samples. I don't want you to think I have disposal income, and I also don't want you to think that because I review something it's a must have for you to get it. I just want you guys to have as much of valuable info as you can get from my reviews so you can make up your own mind how to spend your own hard earned money. And perhaps save you and vendors hassle and headache of buying and returning it back because you based your buying choice on a pretty photoshoped picture or some blog or YT channel where they only care about number of Likes or Subscribers to build their reputation.
If you guys want to continue this discussion, feel free to post it in my official "vectron" summary review post (in my sig).
vectron said:
Thanks bro, and everybody else for kind words! I do my best to handle my replies maturely lol!!! Sh!t like that doesn't fly in forums where I'm moderating Plus, I provide links of my reviews back to the vendors because they like to read feedback and also comments from other users. XDA-Developers community held in a VERY HIGH respect with every vendor I communicate. I'm not representing vendors, but in some way I feel like I representing XDA community in a face of the vendor. I don't have to sugar coat my review, I try to present facts and support it with pictures. There are too many YT and Blog reviews where every single product is "great" and "must have" and they just read description bullets off vendors website. I'm honestly telling you that tempered glass is NOT for everybody, and its an expensive accessory. But if you decide to go with one then do your homework and read other comments on this forum. It's a big investment and you want it to work right
Also, about being able to afford such things. Just please don't take it in a cocky way, but with amount of reviews I have posted, amount of time I spend on it, and feedbacks I provided back in direct email communication with vendors, I earned their trust and respect to receive review samples. I don't want you to think I have disposal income, and I also don't want you to think that because I review something it's a must have for you to get it. I just want you guys to have as much of valuable info as you can get from my reviews so you can make up your own mind how to spend your own hard earned money. And perhaps save you and vendors hassle and headache of buying and returning it back because you based your buying choice on a pretty photoshoped picture or some blog or YT channel where they only care about number of Likes or Subscribers to build their reputation.
If you guys want to continue this discussion, feel free to post it in my official "vectron" summary review post (in my sig).
Click to expand...
Click to collapse
:good: Well said! Also, yeah I didn't mean the affording comment in a negative light. many people have nice things and don't show off. I wanted to outline that you don't do your reviews to show off, but rather inform the good and bad of each item you have.
Check out my video review on the Spigen Slim Armor View:
https://wwwyoutube.com/watch?v=Kqc0gUDvueU
One thing I forgot to mention in the video is the auto sleep/wake function. This allows the screen to sleep just like with regular usage. When you wake the phone using the standby button the app will still be running.
I do not have enough posts to place an external link in a thread, so you will have to put a dot after the www in the link.
It would be great if someone could post the proper link.
Here you go, embedded it for you.
Very well done review! Nice detail and the video is super clear.
mmmmBACON said:
Here you go, embedded it for you.
Very well done review! Nice detail and the video is super clear.
Click to expand...
Click to collapse
Thanks, I actually just re-uploaded it with a little bit on the Application used.
You can see it here:
https://wwwyoutube.com/watch?v=Kqc0gUDvueU
Again sorry, it would be great if you could embed the new video.
Thanks
Updated my post with your new video.
mmmmBACON said:
Updated my post with your new video.
Click to expand...
Click to collapse
Thanks
Fantastic review. Does NFC sill work?
i can confirm nfc still works
is the app downloaded from the playstore or does spigen give you a link?
freezeburn said:
is the app downloaded from the playstore or does spigen give you a link?
Click to expand...
Click to collapse
the app is on the playstore its called slim view cover and spigen is releasing there own app on 05/01
Not to dig up too old a topic, but anyone have thoughts on the new app if it actually came out? I've been holding off buying this until the Spigen app released.
Sent from my Nexus 5 using Tapatalk
Their app really really sucks. I don't know why I thought it'd be good. Mostly all of their products suck I'm kinda happy with the case but still have issues with it. Under the window its still plastic not rubber so the plastic is resting right on the screen and the front cover is really thin and it bugs me just because I can press down on it and it will touch the screen. I don't have a screen protector on it so this is a concern. Its alright but I'll definitely be looking for a new case. Hard to hold while texting and the hinge is kinda crappy. They say 360° but I don't see how they got 360 when that means a complete rotation. It flips on its back and that's only 180°. But at least it doesn't cover the camera.
Sent from my Nexus 5 using Tapatalk
Again to dig up the old topic...
but...
... no reason to start a new thread as anyone looking to buy this case should be able to find all opinions in one place.
I bought this case have extremely mixed feelings.
1, it's a great case. It fits well. The buttons require a little extra effort to push, but no big deal. Supposedly the flip cover is removable, but I haven't seen how to do it without breaking the hinge. I'm sure it can be done, but I'm afraid to push things. Definitely it makes the phone bigger and heavier, but I don't see that as a bad thing as honestly the phone is a featherweight without a case. One minor issue with the physical build, is that the bottom edge of the view window brushes the screen of the phone while closed. Being plastic, I'm sure it wouldn't affect the glass screen. However, it does appear to be starting to leave a worn spot on the screen protector of my phone after only a few weeks. Something to definitely think of if you use plastic screen protectors.
2, the software is incredibly incredibly terrible. Whether you use 3rd party or the official Spigen app, they both bite the big one. I can't review each separately because I swapped between them constantly as new problems appeared, and forgot which one had which problems. But problems included: battery usage. phone calls not answering. phone calls answering themselves. can't connect bluetooth outgoing calls without opening flip cover. randomly lists previous calls as still ongoing. Additionally, though this isn't technically software, you have to be exceedingly careful not to even get near the proximity sensor while using the phone or it will trigger the app. Even with a 2 second proximity delay, I found it was very hard especially in landscape mode (such as taking pictures) to not accidentally trigger the sensor. Also, having the light sensor covered renders auto brightness non functional.
In the end, I still use the case. But without proper software support, I'm not sure it is worth $45. I ended up just putting widgets on my homescreens on the top 1/2 of the screen so I can see them with the flip cover closed. Answering the phone requires the ol' open the flip cover deal. That's better than the terrible software.
As far as protection... considering my Nexus 4 shattered from a drop onto dirt, despite having a Ringke Hybrid Fusion installed, I was looking for better protection. It appears this offers much better protection. It has already survived a 3 foot drop, initiated by a cranky cat, from a piano to a hardwood floor. Only time will tell, of course.
If you don't mind NOT having the software support... I feel this might just be the safest your Nexus 5 can be without placing it in a firesafe filled with expanding foam.
My buddy ordered this case a while ago, loved it, then hated it. Some of you were concerned about the view window touching the screen and potentially scratching it, well it did, for him at least. He now has a dull line across the middle of his screen. Almost the whole width. This only took 2 weeks of use. Just a little FYI for those interested in this case. You'll definitely want to use a screen protector with it.
Yeah my screen got deep scratches as well I can see them on the otherwise of my now installed screen protector. Its a nice case. Terrible window. And terrible app. The Galaxy S4 view armor had glass in the case itself. I bought this because I thought it did too.
Sent from my Nexus 5 using Tapatalk
lotherius said:
Again to dig up the old topic...
but...
... no reason to start a new thread as anyone looking to buy this case should be able to find all opinions in one place.
I bought this case have extremely mixed feelings.
1, it's a great case. It fits well. The buttons require a little extra effort to push, but no big deal. Supposedly the flip cover is removable, but I haven't seen how to do it without breaking the hinge. I'm sure it can be done, but I'm afraid to push things. Definitely it makes the phone bigger and heavier, but I don't see that as a bad thing as honestly the phone is a featherweight without a case. One minor issue with the physical build, is that the bottom edge of the view window brushes the screen of the phone while closed. Being plastic, I'm sure it wouldn't affect the glass screen. However, it does appear to be starting to leave a worn spot on the screen protector of my phone after only a few weeks. Something to definitely think of if you use plastic screen protectors.
2, the software is incredibly incredibly terrible. Whether you use 3rd party or the official Spigen app, they both bite the big one. I can't review each separately because I swapped between them constantly as new problems appeared, and forgot which one had which problems. But problems included: battery usage. phone calls not answering. phone calls answering themselves. can't connect bluetooth outgoing calls without opening flip cover. randomly lists previous calls as still ongoing. Additionally, though this isn't technically software, you have to be exceedingly careful not to even get near the proximity sensor while using the phone or it will trigger the app. Even with a 2 second proximity delay, I found it was very hard especially in landscape mode (such as taking pictures) to not accidentally trigger the sensor. Also, having the light sensor covered renders auto brightness non functional.
In the end, I still use the case. But without proper software support, I'm not sure it is worth $45. I ended up just putting widgets on my homescreens on the top 1/2 of the screen so I can see them with the flip cover closed. Answering the phone requires the ol' open the flip cover deal. That's better than the terrible software.
As far as protection... considering my Nexus 4 shattered from a drop onto dirt, despite having a Ringke Hybrid Fusion installed, I was looking for better protection. It appears this offers much better protection. It has already survived a 3 foot drop, initiated by a cranky cat, from a piano to a hardwood floor. Only time will tell, of course.
If you don't mind NOT having the software support... I feel this might just be the safest your Nexus 5 can be without placing it in a firesafe filled with expanding foam.
Click to expand...
Click to collapse
I have bombed spigen's email with complaints and they do not even bother to reply - it's such a shame that a company would make a great case, with promises of a functioning app and not follow through. My brother (note 3) and my gf (S4) BOTH bought this case on my recommendation and they love it bc it just works. I know it's different bc we dont have the magnets to trigger the innerworkings but sheesh just give us something relatively useful and it would be okay.
AceKingNYC said:
I have bombed spigen's email with complaints and they do not even bother to reply - it's such a shame that a company would make a great case, with promises of a functioning app and not follow through. My brother (note 3) and my gf (S4) BOTH bought this case on my recommendation and they love it bc it just works. I know it's different bc we dont have the magnets to trigger the innerworkings but sheesh just give us something relatively useful and it would be okay.
Click to expand...
Click to collapse
I'd be willing to give a little pass on the proximity sensor issues if those were the ONLY issues.
Sooo, spigen supplys the case but no app?
Or does anyone have more info then that, i ordered the case before i read up on it in here... and now i have it laying on my desk and i am not sure if i sould unpack it or not.
Without the app the window is pointless... and i could have ordered the slim armor instead and saved a few bucks ...
but i really liked the idea of having my screen protected by a secon layer of defense .. first one is obviously a screen foil ...
can anyone confirm that the app is really missing or am i just to stupid to use the search function?
Onecton said:
Sooo, spigen supplys the case but no app?
Or does anyone have more info then that, i ordered the case before i read up on it in here... and now i have it laying on my desk and i am not sure if i sould unpack it or not.
Without the app the window is pointless... and i could have ordered the slim armor instead and saved a few bucks ...
but i really liked the idea of having my screen protected by a secon layer of defense .. first one is obviously a screen foil ...
can anyone confirm that the app is really missing or am i just to stupid to use the search function?
Click to expand...
Click to collapse
The app is in the PlayStore. I just watched a video on it as I'm looking for a case for mine. They'll have a QR code on the instructions.
They do provide an app - but the app is terrible.
lotherius said:
They do provide an app - but the app is terrible.
Click to expand...
Click to collapse
Have they not updated it since release of this case?
I just purchased a back cover for my Z3C and noticed that it covers the camera lens too. That's a nice feature considering so many have scratched their lenses.
And it goes without saying, I DO NOT WORK FOR THIS COMPANY! Just trying to share the deal I got.
http://www.xtremeguard.com/
I got in on this for another phone but didn't see anything for the z3c, otherwise i would have ordered something for the back
Guess my brain wasn't working that day, just found it. This will be perfect for the back plus better grip. Ive used these in the past with great results
thanks for sharing! just ordered one too!
does it fit with devilcase?
I don't see why it wouldn't. It's just a thin piece of tpu
Sent from my Xperia Z3 Compact
Nice!
Thanks for the heads up!
These were so cheap, I purchased two of them. I've noticed that these films tend to yellow over time, and it really shows on a white phone.
PuffDaddy_d said:
These were so cheap, I purchased two of them. I've noticed that these films tend to yellow over time, and it really shows on a white phone.
Click to expand...
Click to collapse
Now that you mention it, I recall the yellowing from past use
On a side note, I got an email today for 91% off the entire site. Will have to place an order today
INFRNL said:
Now that you mention it, I recall the yellowing from past use
On a side note, I got an email today for 91% off the entire site. Will have to place an order today
Click to expand...
Click to collapse
Makes me wonder if they're going out of business with these prices?
PuffDaddy_d said:
Makes me wonder if they're going out of business with these prices?
Click to expand...
Click to collapse
I hope not, I really like their protectors; mainly for the back. However they do need to work on the yellowing issue as you mentioned.
Also they just came out with their spartan glass screen protectors. Really hard to say, what's going on but I'm not complaining
Will have to stock up on a few items just in case
Edit: Just went to their page and saw that they now offer lifetime warranty on their protectors, granted most will update at least every 2 years I imagine. So the warranty is kind of pointless; good marketing scheme though. Also looks like they are starting to offer more products overall. So I'm not sure why the low prices, maybe to stay competitive?
EDIT 2: maybe you are right, just reread the email and says "*Limited quantities are available in tempered glass and other accessories by XtremeGuard. These products will only be available while supplies last"
Sorry to double post but wanted this separate from my last post.
I believe this code is good for more than 1 use; so anyone wanting to use it on the site is more than welcome. I just ordered a bunch of protectors, etc for various devices we have.
price comes out to dirt cheap.
91% off 2-15 items storewide: BEACH91 enjoy! At this price, you can't go wrong
otherwise they still have their summer80 off.
INFRNL said:
Sorry to double post but wanted this separate from my last post.
I believe this code is good for more than 1 use; so anyone wanting to use it on the site is more than welcome. I just ordered a bunch of protectors, etc for various devices we have.
price comes out to dirt cheap.
91% off 2-15 items storewide: BEACH91 enjoy! At this price, you can't go wrong
otherwise they still have their summer80 off.
Click to expand...
Click to collapse
Nice find! Thanks for the info.