I have Sony Arc and I try to install CM9
first I tried to install FXP123 and the touchscreen is not responding but the physical buttons is works.
Second I triend to install FXP126 and the touchscreen is working, After I do restart to the phone and after the touchscreen is not responding but the physical buttons is works.
After I triend to install RC1 and again the touchscreen is not working and the physical buttions is working.
I try to search the problem in Google and XDA forums and I dont found the solution.
please help me I want the CM9 not the sony ICS rom.
If you didn't Wipe Data/Cache/Dalvik then that's your problem, wipe everything before flashing and it should work, you can backup and restore DATA only on advanced restore at CWM later if you worry to lose your stuff.
if you wiped everything and this still happens to you then I am sorry, I don't know.
wissamidrissi said:
If you didn't Wipe Data/Cache/Dalvik then that's your problem, wipe everything before flashing and it should work, you can backup and restore DATA only on advanced restore at CWM later if you worry to lose your stuff.
if you wiped everything and this still happens to you then I am sorry, I don't know.
Click to expand...
Click to collapse
hii, thank you for the help but I wipe the data/cache/dalvik and I have the problem on the touchscreen.
It's very strange
oreee said:
hii, thank you for the help but I wipe the data/cache/dalvik and I have the problem on the touchscreen.
It's very strange
Click to expand...
Click to collapse
Try install CM9 RC1 via Get.cm
I download the CM9 RC1 from this website and I get the touchscreen issue
up
How about FXP127?
xtacy! said:
How about FXP127?
Click to expand...
Click to collapse
its not work
me too, by clearing up cache still doesn't work
Someone on CM9 support please help us
please help me
This might help you
NOTE: CM9 is a bit new and may have a few errors/bugs or may not be stable so that may be your problem, wait until a new RC has been released for CM9
1. Stock your phone to stock firmware
2. Make sure you do a “Wipe data / factory reset” and “Wipe cache partition” before installing a custom ROM
3. Before installing the new ROM make sure your phone fits the requirements needed for that ROM
If it still continues to be that your problem is constantly happening, try using CM7.2
Related
please help me
I try about 3 roms and when I try to install new app the device reboot..
what should I do ??? please help me X_x
Which roms did you use?
Model: Wildfire S A510e
Recovery: unofficial CWM
Rom: JxMatteo_ROM_V1. 1 with Link2sd - OC - Rooted
apparently freezes and reboots can be a problem if you forget to clear everything before installing custom roms....so you need to do factory reset, clear all cache, clear dalvik cache or whatever it's called, then install rom.
this didn't actually work for me when i tried to put CM7 on my phone, i've ended up clearing it all, formatting evrything and just going back to stock because CM7 was so unstable on my phone.
but if you forgot to clear everything when you first installed, try that first?
Hope you get it going. If not, you can also install stock, but you can still partition the sd card and use link2sd to give you basically a gig of "internal" storage (it lets you install pretty much all apps to the 2nd partition on the sd card. running very well now on mine.
I was just about to create a thread about this problem. I flashed m1ndh4x8r's ROM onto my device after a bad experience with the CM7 nightly, fully wiped, permissions fixed. I was on that exact same ROM the day before flashing CM7 and it was working perfectly, did everything it said it would, apps installed just fine. And the first time I installed that ROM, I didn't wipe a single thing.
So, now I'm thinking we should revert to the stock ROM, then flash this one back over it with no wipes, then if that doesn't work, revert to stock again and try flashing the ROM the proper way, wipes and all.
I'll try fixing this every way I can. I'll tell you if I find a fix for myself that you could use as well
matt5eo said:
Which roms did you use?
Model: Wildfire S A510e
Recovery: unofficial CWM
Rom: JxMatteo_ROM_V1. 1 with Link2sd - OC - Rooted
Click to expand...
Click to collapse
1- JkantaruROM XE
2- alquez cyanogenmod 7
3- m1ndh4x8r
Gloris said:
apparently freezes and reboots can be a problem if you forget to clear everything before installing custom roms....so you need to do factory reset, clear all cache, clear dalvik cache or whatever it's called, then install rom.
this didn't actually work for me when i tried to put CM7 on my phone, i've ended up clearing it all, formatting evrything and just going back to stock because CM7 was so unstable on my phone.
but if you forgot to clear everything when you first installed, try that first?
Hope you get it going. If not, you can also install stock, but you can still partition the sd card and use link2sd to give you basically a gig of "internal" storage (it lets you install pretty much all apps to the 2nd partition on the sd card. running very well now on mine.
Click to expand...
Click to collapse
how can I go back to stock ?? and what is CM7 meaning???
johnnyspritz said:
I was just about to create a thread about this problem. I flashed m1ndh4x8r's ROM onto my device after a bad experience with the CM7 nightly, fully wiped, permissions fixed. I was on that exact same ROM the day before flashing CM7 and it was working perfectly, did everything it said it would, apps installed just fine. And the first time I installed that ROM, I didn't wipe a single thing.
So, now I'm thinking we should revert to the stock ROM, then flash this one back over it with no wipes, then if that doesn't work, revert to stock again and try flashing the ROM the proper way, wipes and all.
I'll try fixing this every way I can. I'll tell you if I find a fix for myself that you could use as well
Click to expand...
Click to collapse
Ok thank you , I'm waiting you
but can you tell me what is the CM7 ???
*_^AL_Ha$aN^_* said:
Ok thank you , I'm waiting you
but can you tell me what is the CM7 ???
Click to expand...
Click to collapse
is a type of rom... currently cm7.2 stable build... CM stands for cyanogenmod
check this site: cyanogenmod.com
Pretty much every ROM ever made says be sure to wipe EVERYTHING. They put that there for a reason. The only time time you MIGHT get away with not wiping is if your flashing the exact same ROM you just had. Then and only then, you might get away without wiping your dalvik.
Sent from my HTC_A510c using Tapatalk
Idk, the ROM worked fine for me, even though I think I didn't wipe anything. When I did wipe the phone before flashing, there was a problem. Though it could just be my device and my bad luck
God hates me, I don't know why I even bother living anymore -.-
EDIT: My faith in God is restored. Just flash this ROM instead. You'll be happy with it and it works just fine for me. Also, wipe EVERYTHING I can't agree that you always have to wipe everything, since not wiping actually solved a problem I had with CM7, but I think that was just an isolated case.
i have googled this and tried multiple ways of installing it but i always get a boot loop. Whats going on?
Hey if you just want to get your phone back again, just flash another firmware from the one you used. Should start up just fine.
have done already but i actually want to install cyn mod. I managed to get as far as the main screen buit then immediately reboots. I cant find wifi modules for latest doom kernel either they arent in his thread.
FLASH KERNEL FIRST (from cyanogenMOD or doomkernel for CM7 etc)
Than flash cyanogenMOD
any other way will make your phone bootloop.
I think you have to unlock BL via SE in order to flash CM..
of course you would likely broke your warranty.
this based on my experience (I'm a newbie too in the android's world). this is what I've done :
1. unlock BL via SE (not all carriers allowed this!)..
2. flash .42 fw
3. follow the instructions given on CM thread by fxp.
it's worked for me.
goodluck.
I've had this problem before. Did you wipe the delvic cache, wipe data/factory reset and wipe cache partition in CWM before you flashed the update.zip?
It would seem it was a specific version of cm that was making it bootloop the one from dooms thread 7.2.0 works fine and also the one before the latest stable release also worked fine. I however found a problem with the spacebar on the keyboard when using the phone in landscape so am now going to try arconium and doom kernel its a shame really because cm from what i used of it looked really nice.
Try 7.1.0.1.
I got bootloop too with 7.1.0.2
Kuroyukii said:
Try 7.1.0.1.
I got bootloop too with 7.1.0.2
Click to expand...
Click to collapse
Aye thats the one i used but ended up having a problem with the spacebar not working in landscape so am on acronium now which is all good but superuser keeps crashing meh always something eh.
at first im also having the same problem,just follow the instruction by FXP : flash bb56,flash fw.42,flash FXP kernel via fastboot,flash update via recovery,wipe dalvik cache,reboot..
Sent from my LT18i using Tapatalk
I have this exact same problem
I've done everything I was supposed to, I think, and still doesn't work. It boots, shows me the little Android "Welcome!" screen, and before I have time to press anything or begin setting up my device, it reboots into the Cyanogenmod loading screen. I've tried different kernels, different basebands, every time wiping Dalvik cache, etc. and it REFUSES to work. I'm pretty desperate by now because I really wanted to use this ROM so any help is greatly appreciated.
I also followed precisely rashid.fairus' instructions and it still does the exact same thing.
You need to Wipe Data, Cache and Dalvik ----- BEFORE AND AFTER FLASH
I do this here, and positive feedback
Velcis Ribeiro said:
You need to Wipe Data, Cache and Dalvik ----- BEFORE AND AFTER FLASH
I do this here, and positive feedback
Click to expand...
Click to collapse
Sometimes you DON'T WIPE ANYTHING AT ALL. Just flash CM and Google.
Works for me on Xperia Acro S.
gabantarung said:
Sometimes you DON'T WIPE ANYTHING AT ALL. Just flash CM and Google.
Works for me on Xperia Acro S.
Click to expand...
Click to collapse
Only when you upgrade to a later version of the same ROM.
Sent from my Xperia Arc S using xda premium
Velcis Ribeiro said:
You need to Wipe Data, Cache and Dalvik ----- BEFORE AND AFTER FLASH
I do this here, and positive feedback
Click to expand...
Click to collapse
Wipe dalvik and cache when upgrading to later version, wiping data will reset phone to factory settings and you lose all personal data.
僕のLT18iから送られてきた
I just installed apex today and I can't use the power button to go to reboot just power's off .
Another issue is that when the phone reboots it go to the screen for activation
Please someone help me ?
I'm using Apex 1.0.1 with franco's 14.4 without issues
Did you restore your nandroid and try flashing again?
no i didnt but i will try that im also having issues with my market not showing any apps any thing i can do to fix this ?
rufftouch said:
no i didnt but i will try that im also having issues with my market not showing any apps any thing i can do to fix this ?
Click to expand...
Click to collapse
If it was just a bad flash when you wipe the data/cache/dalvik cache and reflash apex it should fix itself...also keep in mind you need to flash 4.0.3 GAPPS immediately after flashing, before reboot
i didnt do a full wipe i only did a cache and dalvik wipe , i did install the 4.0.03 gapps right away before restarting.
rufftouch said:
i didnt do a full wipe i only did a cache and dalvik wipe , i did install the 4.0.03 gapps right away before restarting.
Click to expand...
Click to collapse
You really do need to wipe data coming from a different ROM and/or android version most of the time. If you don't apps can and will crash
i came from the same rom just 2 versions older i think the bigxie 4-2 or something , im still having issues with the market it was working fine after i reinstalled the rom but now it keeps doing the same
I am currently running cm9 rc1 with the original kernel(the one dat comes in the folder)
heres my problem wifi turns on but wont scan or detect a network
This is what i didi in cwm;
wipe data
wipe cache
wipe dalvik cache
wipe battery stats
any sugesstions? if any one has cm9 rc 1 how did the set it up?
xperiaplayicsuser2013 said:
I am currently running cm9 rc1 with the original kernel(the one dat comes in the folder)
heres my problem wifi turns on but wont scan or detect a network
This is what i didi in cwm;
wipe data
wipe cache
wipe dalvik cache
wipe battery stats
any sugesstions? if any one has cm9 rc 1 how did the set it up?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=27535011&postcount=1801 This is a workaround, I'd use a different kernel to be honest. My signature has the kernel I currently use for cm9 if you want to try it out
agraceful said:
http://forum.xda-developers.com/showpost.php?p=27535011&postcount=1801 This is a workaround, I'd use a different kernel to be honest. My signature has the kernel I currently use for cm9 if you want to try it out
Click to expand...
Click to collapse
Thanks for the reply:laugh
but the roblem is it cant see networks
and if i were to use mjolnir kernel do i need to flash his modules or just flash and wipe everything
xperiaplayicsuser2013 said:
Thanks for the reply:laugh
but the roblem is it cant see networks
and if i were to use mjolnir kernel do i need to flash his modules or just flash and wipe everything
Click to expand...
Click to collapse
Doh! I read that part too haha my bad. Are you 100% sure it's not a problem with your network? If it's not then yes, flash the wifi modules through cwm and wipe cache. If that doesn't work then you may need to wipe everything and start fresh
agraceful said:
Doh! I read that part too haha my bad. Are you 100% sure it's not a problem with your network? If it's not then yes, flash the wifi modules through cwm and wipe cache. If that doesn't work then you may need to wipe everything and start fresh
Click to expand...
Click to collapse
Im sure its with the network beacuse it worked fine on gb and ill try and tell you
thanks
agraceful said:
Doh! I read that part too haha my bad. Are you 100% sure it's not a problem with your network? If it's not then yes, flash the wifi modules through cwm and wipe cache. If that doesn't work then you may need to wipe everything and start fresh
Click to expand...
Click to collapse
Still not recognizing how did you do it?
xperiaplayicsuser2013 said:
Still not recognizing how did you do it?
Click to expand...
Click to collapse
Well when I installed cm9 I flashed back to stock then went to cm9 and flashed everything, wiped everything about three times (better safe then sorry) and booted up. Have you tried fxp 129 with the Mjolnir kernel? It may be that the cm release is giving the issues..The bots on cyanogenmod go crazy sometimes.. You can also try re-downloading the ROM in case it's a corrupt download
agraceful said:
Well when I installed cm9 I flashed back to stock then went to cm9 and flashed everything, wiped everything about three times (better safe then sorry) and booted up. Have you tried fxp 129 with the Mjolnir kernel? It may be that the cm release is giving the issues..The bots on cyanogenmod go crazy sometimes.. You can also try re-downloading the ROM in case it's a corrupt download
Click to expand...
Click to collapse
thanks so much
wiping everything three times worked
Hi there
I have wiped data, cache, dalvik cache and fix permissions, flashed Remics 1.8 and Gapps 20120429 and i'm stuck at Remics boot animation.
I am trying for the second time, this time I wiped data, cache before flashing gaps too but it's booting for 15 minutes now and still waiting.
The ROM was released today so I have no feedback. Anyone tried it already?
Thanks
Zbriu said:
Hi there
I have wiped data, cache, dalvik cache and fix permissions, flashed Remics 1.8 and Gapps 20120429 and i'm stuck at Remics boot animation.
I am trying for the second time, this time I wiped data, cache before flashing gaps too but it's booting for 15 minutes now and still waiting.
The ROM was released today so I have no feedback. Anyone tried it already?
Thanks
Click to expand...
Click to collapse
To make sure you have the full file try checking the size, download the file, check size, if same click cancel and if not same delete the incomplete version(sometimes it's just a network problem, happened to me before)
After checking you have full sizes, follow these steps:
(1) copying the files to you phone.
1- use CWM, connect usb to computer.
2- go to mounts and storage.
3- connect usb storage.
4- copy files to the phone's internal memory.
(2) flash the rom.
1- go to mounts and storage(again)
2-format /system /data /cache
3- go back and wipe data(just to make sure) then go to advanced and wipe dalvik cache.
4- go back and flash rom and Gapps.
5- again go to advanced and but now fix permissions.
6-reboot and enjoy!
Press The Thanks Button If I Helped.
Thanks
I had to install another rom but i'll try it again tonight and than i'll let you know if it worked. Thanks for helping me.
Didn't work but I guess it's a problem with the rom and the developer is trying to fix it, but thank you for your advise! :good:
Zbriu said:
Didn't work but I guess it's a problem with the rom and the developer is trying to fix it, but thank you for your advise! :good:
Click to expand...
Click to collapse
no problem, why not try the slim rom until he fixes it?
7amada100 said:
no problem, why not try the slim rom until he fixes it?
Click to expand...
Click to collapse
I went back to cm9 b4 because i was having some apn issues with slim, i think cm9 is currently the most stable custom rom
Zbriu said:
I went back to cm9 b4 because i was having some apn issues with slim, i think cm9 is currently the most stable custom rom
Click to expand...
Click to collapse
True, arco really worked hard on it. I like to take the risk for the features