So I noticed this yesterday when I open handcent.. As the screen got brighter it pulsated for a second going brighter and dimmer for a few seconds then stopped. Is that just my light sensor acting up?
Must be a fluke since no one else is seeing this? I may just sell the phone and get the sgs3 today.
Related
My GNex has a screen burn in of the status bar, and the navbar. It is a dark blue shade, and I look closely I can see the back, home, and recent apps button. I am currently using the screen burn in tool to try and fix it. Has anyone else had this happen to them?
use the search feature. its been discussed before.
It's common in the Galaxy Nexus, and there really isn't much you can do about it besides the screen diagnostics tool. I get it as well, and my Gnex is only about 6 months old...
Turn down your screen brightness! Not only will you keep from ruining your screen with burn in, but you will save some battery in the process.
In the year+ I've had this phone never once have I noticed ghosting, much less had issues with burn in. And since it is.. Turn your brightness down, or chalk it up to user (your) error.
WiredPirate said:
Turn down your screen brightness! Not only will you keep from ruining your screen with burn in, but you will save some battery in the process.
In the year+ I've had this phone never once have I noticed ghosting, much less had issues with burn in. And since it is.. Turn your brightness down, or chalk it up to user (your) error.
Click to expand...
Click to collapse
I have it below half when i'm inside because of bright lighting. Outside I switch it to full so its visible.
Do you guys recommend the Galaxy Screen burn-in\ghosting diagnose and repair utility, or the screen burn in tool, on the play store?
Did you manage to solve this issue?
I used this app from google play "Screen Burn Repair" to fix the issues I had with screen burn.
Hi, maybe someone have encouter similar issue and have and could comfirm if there could be anything else i could do except replacing whole lcd+touch, which cost pretty much same as new unit
My my screen is showing some weird artefacts on screen, at first there is not much but its getting worse after few muniutes of use. If i lock and unlock the device i show white light bleed on left side of the screen (first picture) then if i lock again, wait for a while it disappears, but some artefacts and color pixel start to show on left side (second pic). After a while some strong white lines apear, always in the some spot, but if i put down the device for few minutes it desappers. Reattaching battery didn't help, i guess thats not the case. Could this be a faulty LCD connector? Or the screen is dying.. ? Definitly not a software bug, i just upgraded to 6.0 and even in bootloader mode while upgrading there were those two lines (last pic)
What screen brightNess do you use. It's recommended to use 20% to avoid screen burn in
dksohum7 said:
What screen brightNess do you use. It's recommended to use 20% to avoid screen burn in
Click to expand...
Click to collapse
Hmm.. since i usually use the tablet in bright locations its probably set to higher then 50%, at least..
There is one more thing, after like 10 minutes of use, almost all the above issues stops, only thing that stays is the "burned like" vertical stripes, barely visible, on about 2/3 of the screen.
I does not make the table unusable but its quite annoying...
could this be affect of screen burn in ?
i think its just a bad screen from a begining cuz i have tab s 8.4 for almost 2 years now and i gave it to my brother for a year and he was in Tenerife...temperatures there are high so i doubt its a screen burn since my tablet is still ok even after one year at Tenerife with probably brightnes always on 100%...just sharing my xperiance cheers guys
Sometimes when I take my phone off the charger, the screen is so dim I can barely see it. I have to fumble my way through the menus to get to the adjust brightness screen. What's weird is that once I finally get to that screen, it brightens on its own. I have played with different brightness levels and watchfaces, but they don't seem to matter. Has anyone else had this problem?
I first noticed this on 1.5 a few weeks ago, even after a full reset, and am now seeing it on DP4 too. My watch is only six months old and does have an extra year of warranty, but I'm hoping for a solution so I don't have to get it replaced.
Not sure if it's related, but many times when I put it on the charger, the screen alternates between the charging screen and normal ambient screen every second or two. Could it be my charger that's causing this issue?
JimSmith94 said:
Sometimes when I take my phone off the charger, the screen is so dim I can barely see it. I have to fumble my way through the menus to get to the adjust brightness screen. What's weird is that once I finally get to that screen, it brightens on its own. I have played with different brightness levels and watchfaces, but they don't seem to matter. Has anyone else had this problem?
I first noticed this on 1.5 a few weeks ago, even after a full reset, and am now seeing it on DP4 too. My watch is only six months old and does have an extra year of warranty, but I'm hoping for a solution so I don't have to get it replaced.
Not sure if it's related, but many times when I put it on the charger, the screen alternates between the charging screen and normal ambient screen every second or two. Could it be my charger that's causing this issue?
Click to expand...
Click to collapse
FYI, this was apparently caused by the app "Wear Brightness Control" from the Play Store. I uninstalled it from my watch and phone and haven't had the problem since. I have emailed the developer to see if he is aware of the problem and can fix it.
I've noticed in the last few days if it's sunny out when using the phone outside the phone puts the brightness up to MAX and I get green, yellow lines all across the screen. If I manually lower the brightness a little it's all ok again. I imported the AL00.. I'm guessing Huawei won't fix it as it's an import... Anyone got any ideas?
ooMoo said:
I've noticed in the last few days if it's sunny out when using the phone outside the phone puts the brightness up to MAX and I get green, yellow lines all across the screen. If I manually lower the brightness a little it's all ok again. I imported the AL00.. I'm guessing Huawei won't fix it as it's an import... Anyone got any ideas?
Click to expand...
Click to collapse
No ideas but I noticed the lines too. It was a really bright sunny day and snow around. The stripes could be seen on the white screen only. It came as a huge surprise cause I haven't noticed any other screen error or malfunction. And screen test passed without any problem.
Same for me.. Only outside and with majority of screen being white. Normally they show up when unlocking and dissapear after a second or so, I think when I start to scroll or similar.. no one else?
It's one of the oled downsides. Check it with 5% grey picture or search on youtube to 5% or 10% grey test.
More info:
https://forums.macrumors.com/threads/iphone-x-display-uniformity-problem.2085460/
A picture to test:
https://i.imgur.com/DUEKJzH.jpg
The first screen in that topic is what I have too on my Mate20X. It's a gamble. If you return it and swap it, you may get a worse unit.
My proximity sensor is pulsating not while on call but while screen is off and in good light conditions. When ambience is dimmed, it stops. Why is it doing this, any fix? Using dome glass.
Weird, but maybe somehow the glue and glass are indeed interacting with the sensor under certain conditions, I was wondering if with this new under display sensor wouldnt be this kind of issues, reading about your case, then I will not use any
Any other insight or possible solution?
I need to make a correction to my question. This behaviour happens when AOD is on and light is good. Funny enough I don't see it on call. But screen turns off just fine on call.
Same here. Even with AOD off. Seems to turn on randomly and flicker. When I wave in front of it, then it stops.
If I turn off the AOD, it stops doing this.
I also have this..sometimes it keeps flickering even after I have unlocked the screen. If I put my finger over it then it goes
I had to turn off tap to wake as the phone kept coming on in my pocket despite the phone being faced towards my leg, to me the proximity sensor in the 10+ is just wrong.
I turned off adaptive AOD brightness and it stopped doing this.
Interesting. I don't see this behavior.
With AOC on a slightly than 1% per hrs battery usage seems to be nominal operation.
This circuit uses little current I suspect anyway.
Unless it's using more battery than I stated it doesn't matter.
It wouldn't harm the OLED... cool find.