Develop Bugs

[ACS][Odin]Stock EG30 Odexed with Root 3.0/Busybox 1.18.4

Big thanks to RoadRAGEN for helping me figure out an ext4 issue! Odin this to get Odexed stock EG30 with latest root and su binary and Busybox 1.18.4.
This does not wipe data.
I am not responsible for anything that happens to your phone. You do this at your own risk.
I have only tested this with the stock kernel and Bubby's CWM kernel.
Download​
IMPORTANT: Make sure you have installed the proper XP or Win7 drivers before starting. Also, remove the SD card from the phone (this may not be necessary, but having the SD card installed has caused Odin to fail for a number of people, so might as well just do it).
1. Extract the contents of the zip file to a folder
2. Open odin
3. Put your phone in download mode (Shut it off, wait for lights to all go out, then hold v-down + power)
4. connect phone (you should see odin put a Com4 or something like that in the first box. The actual number is NOT important what is important is something popped up there when you connected your device, meaning ODIN can see it)
5. The only box that should be checked is Auto Reboot.
6. You do not need to choose a pit file.
7. In the PDA Section choose the tar file. (Odexed-Rooted-Busybox-EG30.tar)
8. Hit start. It will do its thing.
9. If it fails than try a new cable.
10. If the phone hangs for any reason take the battery and sdcard out and let it sit for an hour. Put it back together and try again.

reserved just in case

reserved again

Sexy bro !

Link is up.

ty for this.

ahhhh!! finally!! thanks crawrj!
so to confirm, we can ODIN this and then bubblys CWM @ http://forum.xda-developers.com/showthread.php?t=1268037?

chip! said:
ahhhh!! finally!! thanks crawrj!
so to confirm, we can ODIN this and then bubblys CWM @ http://forum.xda-developers.com/showthread.php?t=1268037?
Click to expand...
Click to collapse
Yes. That is what I have done in testing.

So with this we will have as stock of a ROM as we can currently have, yet still have root and busybox? By stock, I mean the default, out of the factory stock ROM which many claim does not have the LOS issues? Just confused somewhat...

Dude, major win here. Good work!
Sent from my SPH-D710 using xda premium

How bad is it if you put the the tar file in the bootloader spot by mistake? It still worked and seems to be fine. Im rooted with stock kernel.
Thanks
Sent from my SPH-D710 using Tapatalk

Euclid's Brother said:
How bad is it if you put the the tar file in the bootloader spot by mistake? It still worked and seems to be fine. Im rooted with stock kernel.
Thanks
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Nothing is bad as long as you can get into download mode no matter what you did. If it won't work you just odin it back.

HondaCop said:
So with this we will have as stock of a ROM as we can currently have, yet still have root and busybox? By stock, I mean the default, out of the factory stock ROM which many claim does not have the LOS issues? Just confused somewhat...
Click to expand...
Click to collapse
That is correct. It is a stock file system with root and busybox. This is not a kernel so it will not replace that or any issues with that.

total nooob about this but which file do i need?
Odin tar: coming soon.
MD5: e6adb2290a514af674366de7b460725d
http://dev-host.org/m0nd8k926g6c/Ode...sybox-EG30.tar
Odin 1.85 including instructions:
MD5: 69b41fc23052e9df82b5464928583b65
http://dev-host.org/006p4mwqzq2n/Odin3_v1.85.zip

rdcrds said:
total nooob about this but which file do i need?
Odin tar: coming soon.
MD5: e6adb2290a514af674366de7b460725d
http://dev-host.org/m0nd8k926g6c/Ode...sybox-EG30.tar
Odin 1.85 including instructions:
MD5: 69b41fc23052e9df82b5464928583b65
http://dev-host.org/006p4mwqzq2n/Odin3_v1.85.zip
Click to expand...
Click to collapse
Odin is the program you use to flash the tar. The tar is the actual package.

crawrj said:
Odin is the program you use to flash the tar. The tar is the actual package.
Click to expand...
Click to collapse
oh ok i have odin already that is why i was confused what this was thanks

Glad to have a stock ROM available

I am on zedo's v4 will this work over it?

crawrj said:
That is correct. It is a stock file system with root and busybox. This is not a kernel so it will not replace that or any issues with that.
Click to expand...
Click to collapse
Ohhh ok, so I can flash this and keep my current Zedomax kernel if need be? Sweet! Thanks!
Sent from my Samsung Galaxy S II Epic Touch 4G WTF BBQ

HondaCop said:
Ohhh ok, so I can flash this and keep my current Zedomax kernel if need be? Sweet! Thanks!
Sent from my Samsung Galaxy S II Epic Touch 4G WTF BBQ
Click to expand...
Click to collapse
So i guess we can flash this over zedo's v4 anyone try yet?

[FEEDBACK]Darchstar CM9 ROM *Help,Tips, and Tricks*

I suggested this thread to Darchstar and I got the go ahead to create it.
I hope, the purpose of it is self-explanatory. It's for all feedback, except bug reports. Logcats are preferred with your bug reports and post them on Darch's ROM thread.
Keep insults and down talks in PMs.
lems111 said:
My steps to upgrade rom:
*Booted into rogue recovery, which is included with this rom, and made nandroid backup.
*Used mobile odin to flash el26 cwm kernel from OP
*I let it be for about 10 minutes. FYI, it seems to power off after it's done flashing.
*I booted into recovery and followed instructions for first time install.
***NOTE: After flashing EL26 cwm kernel, phone won't reboot into OS; so, don't panic. Just used hard key combination to boot into recovery
Click to expand...
Click to collapse
sanchez said:
For those using Macs:
Download and install Heimdall:
http://www.glassechidna.com.au/products/heimdall/
Download EL26 CWM Kernel:
http://www.mediafire.com/?u0hs65d1utb3fe4
(Rename this to whatever.tar and then extract the zImage, put that on your desktop)
Place phone into Download mode (power + volume down)
Navigate to desktop in terminal:
Code:
cd desktop
Open Terminal, type:
Code:
heimdall flash --kernel zImage
It will reboot once finished, then press power and volume up until you get to recovery.
Wipe data, cache, then flash your rom + gapps.
Reboot and enjoy!
The next step (optional):
Download your modem of choice, and put your phone back into download mode. To flash the modem, open up terminal again and type:
Code:
heimdall flash --modem modem.bin
Or whatever your modem file is called.
Reboot again and enjoy!
Click to expand...
Click to collapse
lems111 said:
This was a post from Vip3rV333 in darch's thread.
I wasnt fully sure which recoveries were the ICS or the gingerbread, and that when you did flash CM9, the EL26 recovery would get overwritten. Thats how I got mine bricked when I tried to wipe and restore. Just add something along the lines of...
If trying to restore to your old backup...
1. Reboot to DOWNLOAD mode (power+vol-down)
2. Using ODIN (link) flash to StockCWM EL26.
3. Wipe and do a factory reset.
4. Then try to restore... yada yada or whatever the exact right procedure is.
Click to expand...
Click to collapse
revamper said:
My steps to installing CM9 with working GPS
1. Odin back to stock rooted EL29 (full restore)
http://forum.xda-developers.com/showthread.php?t=1433101
2. Use automated rooting package to flash EL26 Kernel CWM zimage *NOT ROGUE*
(option c then option i) http://forum.xda-developers.com/showthread.php?t=1342728
3. download gps test from market and get gps lock
4. *WITHOUT TURNING OFF GPS OR CLOSING GPS TEST*, turn off the phone
5. Hold vol up + power to boot into recovery
6. flash calkulins format all
7. flash cm9
8. flash gapps
9. flash fc07 modem
10. reboot
11. shed tears of joy
Click to expand...
Click to collapse
Sent from my SPH-D710 using Tapatalk

lems111 said:
I suggested this thread to Darchstar and I got the go ahead to create it.
I hope, the purpose of it is self-explanatory. It's for all feedback, except bug reports. Logcats are preferred with your bug reports and post them on Darch's ROM thread.
Keep insults and down talks in PMs.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
shoulda put it in general forum..

My steps to upgrade rom:
*Booted into rogue recovery, which is included with this rom, and made nandroid backup.
*Used mobile odin to flash el26 cwm kernel from OP
*I let it be for about 10 minutes. FYI, it seems to power off after it's done flashing.
*I booted into recovery and followed instructions for first time install.
***NOTE: After flashing EL26 cwm kernel, phone won't reboot into OS; so, don't panic. Just used hard key combination to boot into recovery
If you do some other fancy **** not mentioned in OP instructions or aren't sure how to flash, do not post help here; I agree with darchstar.
Sent from my SPH-D710 using Tapatalk

For those using Macs:
Download and install Heimdall:
http://www.glassechidna.com.au/products/heimdall/
Download EL26 CWM Kernel:
http://www.mediafire.com/?u0hs65d1utb3fe4
(Rename this to whatever.tar and then extract the zImage, put that on your desktop)
Place phone into Download mode (power + volume down)
Navigate to desktop in terminal:
Code:
cd desktop
Open Terminal, type:
Code:
heimdall flash --kernel zImage
It will reboot once finished, then press power and volume up until you get to recovery.
Wipe data, cache, then flash your rom + gapps.
Reboot and enjoy!
The next step (optional):
Download your modem of choice, and put your phone back into download mode. To flash the modem, open up terminal again and type:
Code:
heimdall flash --modem modem.bin
Or whatever your modem file is called.
Reboot again and enjoy!

Darkstar and Sbrissen are working together and since there is already one of these, there really isn't a need for this..

lems111 said:
My steps to upgrade rom:
*Booted into rogue recovery, which is included with this rom, and made nandroid backup.
*Used mobile odin to flash el26 cwm kernel from OP
*I let it be for about 10 minutes. FYI, it seems to power off after it's done flashing.
*I booted into recovery and followed instructions for first time install.
***NOTE: After flashing EL26 cwm kernel, phone won't reboot into OS; so, don't panic. Just used hard key combination to boot into recovery
If you do some other fancy **** not mentioned in OP instructions or aren't sure how to flash, do not post help here; I agree with darchstar.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Do you wipe all or just like cache/dalvich?
Sent from my SPH-D710 using Tapatalk

MikeC84 said:
Darkstar and Sbrissen are working together and since there is already one of these, there really isn't a need for this..
Click to expand...
Click to collapse
Honestly there is another thread but the more the better as long as it keeps crap out of the real dev thread

iSaint said:
Honestly there is another thread but the more the better as long as it keeps crap out of the real dev thread
Click to expand...
Click to collapse
I kinda agree. Also, I noticed your signature has 100% less boobage than before. For that reason, I am sad.

This thread is irrelevant. That's what irc is for.
Sent from my SPH-D710 using XDA

Instead of saying this thread is irrelevant, why don't you post something that is relevant to the title of this thread. The majority of these posts don't help anyone looking for help with CM9.
Sent from my SPH-D710 using XDA

PinnerProxy said:
Do you wipe all or just like cache/dalvich?
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
As Darch's OP says, Wipe Data (Factory Reset). You should see that option in cwm stock recovery
Sent from my SPH-D710 using Tapatalk

I think some people are over looking the fact that the OP asked darchstar if this thread was a good idea and darchstar gave him a green light. By that alone, I have no problem with this. There have been discussion threads in development forums in the past and if this clears up some of the garbage on the main page, then job well done. But please stop bashing the guy, he's clearly just trying to be helpful.
Sent from my SPH-D710 using xda premium

CWM is included in latest version....not Rogue. Still cool to make a nandroid for the next update in the CWM included?

lems111 said:
As Darch's OP says, Wipe Data (Factory Reset). You should see that option in cwm stock recovery
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Can I flash this from CM7?
Sent from my SPH-D710 using XDA

nitro_c4 said:
Can I flash this from CM7?
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
To be safe, use EL26 kernel with cwm recovery posted in darch's ics rom thread.
Sent from my SPH-D710 using Tapatalk

Hamish26 said:
CWM is included in latest version....not Rogue. Still cool to make a nandroid for the next update in the CWM included?
Click to expand...
Click to collapse
DONT DO IT.
FLASH BACK TO EL26 STOCK...
I bricked by doing a nandroid restore from this recovery.
womp womp womp

lems111 said:
To be safe, use EL26 kernel with cwm recovery posted in darch's ics rom thread.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Guess I'll just wait for the AOKP update tonight. Thank you anyways
Sent from my SPH-D710 using XDA

Why is it that people still after all the bricks and all the post of how people bricked MFs still wanting to do **** in ics recovery just don't ****ing do it use Odin back to gingerbread please.
Sent from my SPH-D710 using xda premium

This was a post from Vip3rV333 in darch's thread. Once I can modify OP through tapatalk, I will add this and other helpful posts.
I wasnt fully sure which recoveries were the ICS or the gingerbread, and that when you did flash CM9, the EL26 recovery would get overwritten. Thats how I got mine bricked when I tried to wipe and restore. Just add something along the lines of...
If trying to restore to your old backup...
1. Reboot to DOWNLOAD mode (power+vol-down)
2. Using ODIN (link) flash to StockCWM EL26.
3. Wipe and do a factory reset.
4. Then try to restore... yada yada or whatever the exact right procedure is.
Sent from my SPH-D710 using Tapatalk

I'm having trouble with certain wireless networks anyone else?
Sent from my SPH-D710 using XDA

[ROM][CM9][AOKP] Temporary Stock E4GT from emmc

Epic Touch Blog: Temporary Stock E4GT from emmc
Utility for CM9 Epic Touch
This is a temporary ROM that boots Samsung's Gingerbread EL29 firmware entirely from emmc without making any changes to the ROM currently installed on your phone. When you reboot, you return to recovery where you can re-flash the ROM to return to CM9. This temporary ROM is useful for several purposes.
Update Profile.
Update PRL.
Sprint Activation.
Dial codes and diagnostic mode.
This should be helpful to users of any AOSP-based ROM including CM9, AOKP, etc.
Thanks to noobnl and mkasick for making this possible!

Really nice thanks a lot.

Awesome can't wait to test it out
Sent from my SPH-D710 using Tapatalk

. This will come in hand
Sent from my SPH-D710 using XDA Premium App

wilderckw said:
. This will come in hand
Sent from my SPH-D710 using XDA Premium App
Click to expand...
Click to collapse
Its a great tool and easy to use. Was testing earlier today.
Sent from my SPH-D710 using Tapatalk

Would this work to flash .zip updates (such as kobridge) or updated ROMs (such as alpha5)?

This definitely will come in handy, can I suggest seeing if you can get a video made of how it works. I can honestly say It seems to help out quite a bit in this forum for a lot of people and does cut down on the crazy questions.
Great job though!

bobjase said:
Would this work to flash .zip updates (such as kobridge) or updated ROMs (such as alpha5)?
Click to expand...
Click to collapse
You can use the directbootCWM file to update CM9 yes. Not sure about using it for Kobridge tweaks.
playya said:
This definitely will come in handy, can I suggest seeing if you can get a video made of how it works. I can honestly say It seems to help out quite a bit in this forum for a lot of people and does cut down on the crazy questions.
Great job though!
Click to expand...
Click to collapse
Maybe qbking can make one for those who need it.
Sent from my SPH-D710 using Tapatalk

I'm sorry but what does this do?
Sent from my SPH-D710 using XDA

m0j09987 said:
I'm sorry but what does this do?
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Its for AOSP roms. You currently can't update PRL/Profile, activate your device, or use dialer codes on them so this temporarily allows you to boot stock el29 off the SD card without changing your current rom. You can do what i said from there. Saves you time from doing backups, restoring, etc.
Sent from my SPH-D710 using Tapatalk

I'm hoping that someone can help me out as I am unable to boot into the temporary ROM. Here are the steps I followed:
1. I have everything extracted to emmc as directed.
2. I flashed directboot CWM utilizing mobile odin which correctly booted me into CWM version 5.0.2.7
3. I flashed boot_EL29.zip at location /emmc/multiboot/EL29 and received the following messages that appear to be correct.
Finding Update Package...​Opening Update Package...​Installing Update...​Boot /emmc/multiboot/EL29/zImage​Create mount symlink.​Remount partitions read-only.​(Re)mount /emmc read-only.​Unpack kexec.​Load zImage and initramfs.​Sync.​Reboot into zImage.​Install from sdcard complete.​4. At this point I expected the phone to reboot into the temporary rom; however, it just shows the standard recovery menu. No reboot occured.
5. Because no automatic reboot occured, I selected "reboot system now" from CWM. Unfortunately this just brings me back into directboot CWM.
Thanks in advance for any help provided.

I am having the same problem I thought it could have been the downloading or unpacking so I downloaded it again and unpacked it and still have the same problem.

smmlee said:
I'm hoping that someone can help me out as I am unable to boot into the temporary ROM. Here are the steps I followed:
1. I have everything extracted to emmc as directed.
2. I flashed directboot CWM utilizing mobile odin which correctly booted me into CWM version 5.0.2.7
3. I flashed boot_EL29.zip at location /emmc/multiboot/EL29 and received the following messages that appear to be correct.
Finding Update Package...​Opening Update Package...​Installing Update...​Boot /emmc/multiboot/EL29/zImage​Create mount symlink.​Remount partitions read-only.​(Re)mount /emmc read-only.​Unpack kexec.​Load zImage and initramfs.​Sync.​Reboot into zImage.​Install from sdcard complete.​4. At this point I expected the phone to reboot into the temporary rom; however, it just shows the standard recovery menu. No reboot occured.
5. Because no automatic reboot occured, I selected "reboot system now" from CWM. Unfortunately this just brings me back into directboot CWM.
Thanks in advance for any help provided.
Click to expand...
Click to collapse
I what having this same issue. There is a different version of direct boot, v3 that you have to use for this.
Sent from my SPH-D710 using Tapatalk 2

All I see is v1 up on the e4gtcm site. Where did you obtain v3 from?

Worked with V3 direct boot Thanks
---------- Post added at 03:35 PM ---------- Previous post was at 03:34 PM ----------
just click on the direct boot link and it will bring you to the V3

smmlee said:
All I see is v1 up on the e4gtcm site. Where did you obtain v3 from?
Click to expand...
Click to collapse
Nevermind. I found the v3 update. Thanks all!

Anymore questions don't be afraid to ask.
Sent from my SPH-D710 using Tapatalk

This sounds pretty cool and I would like to test it... what I don't understand is when I'm done with the temp rom, how do I get back to AOKP? Do I need to reflash the whole AOKP rom? Just the kernel?

epdp14 said:
This sounds pretty cool and I would like to test it... what I don't understand is when I'm done with the temp rom, how do I get back to AOKP? Do I need to reflash the whole AOKP rom? Just the kernel?
Click to expand...
Click to collapse
When done updating prl/profile, etc. Just reboot your phone and it will take you back to cwm recovery. From there you can either just reflash the rom or just a compatible kernel so it boots.
Sent from my SPH-D710 using Tapatalk

excellent. this could also help people do the gb GPS fix.. sweet man.

[UPDATE][KERNEL][ROM] tFF09 & tFF11 with FF09 & FF11 repack with AGAT recovery 0.1.1

[UPDATE][KERNEL][ROM] tFF09 & tFF11 with FF09 & FF11 repack with AGAT recovery 0.1.1
Our thanks to sfhub for his amazing (as usual) work.
Our thanks to whoever leaked this build to us.
There is not much to say about this repack.
All as we know.
1. init.d support
2. custom boot animation support
3. debug mode
4. Repacked with AGAT recovery v0.1.1.
5. TAR and ZIP format.
1. FF09_AGAT.tar flash with ODIN
2. FF09_AGAT.zip flash in any unlocked recovery
FF11 repack:
1. FF11_AGAT.tar flash with ODIN.
2. FF11_AGAT.zip flash with any unlocked recovery.
FF11 Repack with AGAT tREC_v0.2.0
About a million thanks to Chris41g for all help, deving and guiding. It is his find and he helped me to implement it here.
New recovery will allow you to mount SD card in recovery mode for easy file transfer to and from phone.
1. FF11_AGAT_v0.2.0.tar flash with ODIN
2. FF11_AGAT_v0.2.0.zip flash in any unlocked recovery.
To mount sd card go to mounts menu and choose mount USB storage.
Rom tFF09_v0.1.0
Sfhub one more time.
Tiffany84 for initial ICS theme.
tFE09_v0.1.0:
1. Touch of ICS.
2. Themed mms, contacts, settings, systemui.
3. International SGSII bootanimation
4. init.d script.
5. build.prop tweaks
6. GN grey background in settings (thanks Ben's for help).
7. GN touch tone (Thanks Ben's for help).
8. GB updater-binary to make it safe to flash in any recovery.
9. I'm sure something else that I'm forgetting.
Install instructions:
1. Download rom
2. Check md5
3. Copy to your SD Card.
4. Check md5sum again.
5. Flash in any unlocked recovery.
6. Boot to system.
Links:
tFF09_v0.1.0
tFF11 has new repack with tREC_v0.2.0.
tFF11_v0.1.0

reserved

Zip says ff02

I used old zip. Kernel should say ff09 in about phone.

agat63 said:
I used old zip. Kernel should say ff09 in about phone.
Click to expand...
Click to collapse
Recovery Flashed showed 09. Thank you again and keep up the great work..

Thanks for this! Can't wait for your rom, as usual
Sent from my SPH-D710 using XDA

Gold star!!! Thank you so much for getting this out so quickly.

I'm going to ask a noob question, since I stay in the shallow water normally with sfhubs one clicks. Could you provide a little more detail in how we use / install this?
Would I ODIN this directly from FF02? Or do I first ODIN FF09 from the one click (data or no data), then ODIN your kernel?
Second question would be, with your recovery included within, could we flash Calks, your rom or Blu Kuban's rom without brick fear? Can we nandroid with your recovery? I'm a little fuzzy on all these recoveries now and which ones are safe, which ones are useful, etc.
Thanks for your time. I appreciate what you do.
Sent from my SPH-D710 using xda premium

!
Sweet... thanks!

mmark27 said:
I'm going to ask a noob question, since I stay in the shallow water normally with sfhubs one clicks. Could you provide a little more detail in how we use / install this?
Would I ODIN this directly from FF02? Or do I first ODIN FF09 from the one click (data or no data), then ODIN your kernel?
Second question would be, with your recovery included within, could we flash Calks, your rom or Blu Kuban's rom without brick fear? Can we nandroid with your recovery? I'm a little fuzzy on all these recoveries now and which ones are safe, which ones are useful, etc.
Thanks for your time. I appreciate what you do.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
You can odin, mobile odin, or I'll have it in Auto Root in probably an hour. Had to take a nap.

mmark27 said:
I'm going to ask a noob question, since I stay in the shallow water normally with sfhubs one clicks. Could you provide a little more detail in how we use / install this?
Would I ODIN this directly from FF02? Or do I first ODIN FF09 from the one click (data or no data), then ODIN your kernel?
Second question would be, with your recovery included within, could we flash Calks, your rom or Blu Kuban's rom without brick fear? Can we nandroid with your recovery? I'm a little fuzzy on all these recoveries now and which ones are safe, which ones are useful, etc.
Thanks for your time. I appreciate what you do.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
We keep his kernels in the updater, I flash with them all day, you need to be aware of what it is you're flashing cause you may unknowingly flash an app or something with that format() command which is what wakes that ugly superbrick Galaxy killer.

Running it and loving it! Thanks for all your work Agat!

Thank you Agat! As always, your right on top of it. we really appreciate these repacked kernels.
Sent from my SPH-D710 using Xparent Blue Tapatalk 2

sfhub said:
You can odin, mobile odin, or I'll have it in Auto Root in probably an hour. Had to take a nap.
Click to expand...
Click to collapse
And as usual the completely unselfish and most dedicated sfhub already getting the Auto Root ready for the community to safely stay on top of the game! Thanks to uou sfhib sir and to you as well Agat for all you do for this community as a whole!

sfhub said:
Had to take a nap.
Click to expand...
Click to collapse
What? Sleep? You? Get back to work! Slacker.

Yay! Something to do this afternoon!
Sent from my SPH-D710 using XDA

My man!
Sent from my "I didn't text you last night… Jack Daniels texted you" using xda premium

Can I flash. Tar with mobile odin
Former Army sergeant 11C20

sfhub said:
You can odin, mobile odin, or I'll have it in Auto Root in probably an hour. Had to take a nap.
Click to expand...
Click to collapse
Mobile Odin goes through the motions but didn't flash. Hmm.
Sent from my SPH-D710 using Tapatalk 2

ginjeet said:
Mobile Odin goes through the motions but didn't flash. Hmm.
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
Reboot and check recovery. I thought that once but it actually worked.
Sent from my SPH-D710 using xda premium

[NEW][KERNEL] CM9 FF11 repack with AGAT recovery 0.2.1

There was a request (more than one) via PM to repack CM9 kernel with my recovery. I know there is a better recovery available but I liked the challenge and decided to give it a try.
With help from Chris41g I was able to make this repack.
Base of this repack is CM9 FF11 kernel.
Everything and anything that worked in FF11 kernel should be working here.
Never used CM before so I have hard time testing repack.
So far I have noticed 3 things.
1. 4G is not turning on.
2. When I mount usb I see only external SD card. Internal storage is not showing up.
3. In settings when I try to go to storage settings.apk is FC.
Other than that everything is working (I think).
Recovery is CM7 (GB) based and has been tested very extensively with TW roms and modified CM/AOSP/AOKP roms.
http://forum.xda-developers.com/showpost.php?p=27124691&postcount=484
We some help I hope to fix those 3 bugs as well but for now I think you can use this repack as alternative if you want to.
Links for tar and zip files:
1. FF11_CM9_AGAT.tar flash with ODIN or mobile ODIN
2. FF11_CM9_AGAT.zip flash in any unlocked recovery.
I have tried both. Flashed tar with mobile odin and flashed zip file with CWM recovery.
If you guys like it I might need some help to finish this project and make sure everything is working.

reserved just in case

Yay First!
Sent from my SPH-D710 using xda premium

RCOVA said:
Yay First!
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
This is definitely thinking outside the box. Excellent as always and makes me feel safer to flash cm9. Thank you sir. Live the way you think.

Sorry I crashed, glad you got it up and running ;-)
Sent from my SPH-D710 using Tapatalk 2

Thanks for this!
Sent from my SPH-D710 using Tapatalk 2

This is awesome but why use FF11 and not FF18? Just wondering, good job as always.

slick4mitch said:
This is awesome but why use FF11 and not FF18? Just wondering, good job as always.
Click to expand...
Click to collapse
As I stated in OP I don't know much about CM.
I took whatever kernel was available.
Gimmi FF18 CM kernel and I'll repack it as well.