Related
Hello,
i've got a problem like the title says. Everytime i connect my phone to the computer via usb, i get the message the device wasnt recognized by the computer. i tried everything i know, another usbport. etc. i want to install a new radio, but without connecting to the computer it isnt possible, because i dont have the usb debugging active.
i hope someone has an idea what i can do. i have rcmix 6.1.0.1 installed.
Are you using Windoze?
If you are unfortunate enough to be doing so then you might need to reinstall HTC Sync program (sometimes it works better if you completely uninstall it first including manually removing any left over folders and files in the application data folder.
thanks for the quick answer.
i tried it, but it didnt help. where is this application data folder? do you mean on the computer? i found after uninstalling no more folders from htc.
and yes i use windows home premium 64bit.
got another idea? now it says also the device does not function properly. i hope that nothing on the device is broken.
schorschl said:
thanks for the quick answer.
i tried it, but it didnt help. where is this application data folder? do you mean on the computer? i found after uninstalling no more folders from htc.
and yes i use windows home premium 64bit.
got another idea? now it says also the device does not function properly. i hope that nothing on the device is broken.
Click to expand...
Click to collapse
yes he is talking about your computer... if in the "program files" you hasn´t anythink about HTC SYNC,, ALL IS OK...
but enssure that in the configuration panel-system-dispositive administrator you hasn´t any drive installed for your android device... if you have installed it, erase or uninstall it before re-install htc sync or the htc drivers....then you can re-install and reboot windoux...
and hey buddy!I recommend to you to consider to pass to linux, you will not have this type of mistakes... LOL
UBUNTU is great!
I'm afraid I don't know much about Windoze but memory serving appication data is a hidden folder so you will need to change it to view them and is in the Documents and Settings / [Your username] directory.
Device not function is just a default Windoze error when it can't install something, ignore it, your phone is fine.
If you have reinstalled HTC Sync, try a USB port on the opposite side of the PC. So if you trying ones next to each other on the front, try ones on the back (they use different headers on the motherboard).
If that doesn't work then I'm afraid I probably won't be of much more use, sorry.
SERGI.3210 said:
and hey buddy!I recommend to you to consider to pass to linux, you will not have this type of mistakes... LOL
UBUNTU is great!
Click to expand...
Click to collapse
Best advice ever. Ubuntu user here too (thus for me everything just works ).
Mr_JMM said:
Best advice ever. Ubuntu user here too (thus for me everything just works ).
Click to expand...
Click to collapse
The use of linux is good to understand better android OS you don´t believe?
you said it.... EVERYTHING WORKS
thanks guys for your help, but although i followed your advices, except the one to switch to linux ;-), it hasnt got better yet. the problem is still exsisting and i dont know what else i can do.
anyone got an idea how to install radio without having usb debugging and the drivers from the computer?
Hi!
I've got the same problem with 2 different PCs, one with Win7 64-bit, the other with Win XP PRO.
Other devices work fine with the same USB ports, so i doubt it's windows or the PC...
schorschl said:
thanks guys for your help, but although i followed your advices, except the one to switch to linux ;-), it hasnt got better yet. the problem is still exsisting and i dont know what else i can do.
anyone got an idea how to install radio without having usb debugging and the drivers from the computer?
Click to expand...
Click to collapse
you can´t flash any radio if your phone is not recognized
well.. Let's continue with the problem in question...
1.At some time could you have connected it?with the stock rom maybe?
2.have you tried to swich on mass storage usb mode?what´s the result?
3.when you tries to swich the phone for flash some radio you enables "usb debug"
and "only chargue"?
its a weird problem
Hey man, I've had the same problem with my old Desire (normal). Which was actually broken.. Went back to the store twice and it was sent to htc twice. But that one wasn't rooted tho. But in the end, the sensors were broken & something inside the phone that didn't recon the pc. But also try a full wipe, which helped temporarily for me.
1. yes i functioned, not only with stock rom, but also with the next few custom roms. but then 2 weeks ago the problem occured and i dont know why. before i used custom roms for months.
2. it also doesnt recognize the mass storage anymore, i dont see the memorycard as a storage device in explorer.
3. yes i turned usb debugging on and connected charging only, i flashed radios before. but the problem with the actual is, that my signalstrength is weak and so i wanted to flash the recommended for this rom, and so i recognized there is something wrong, cause my problem here occured.
normally i sync with myphoneexplorer so i didnt realize that mass storage didnt function anymore.
and because earlier i got no problems, i think more and more, that something on the phone went wrong.
maybe it helps if i go back to stockrom and undo all changes i made, to start all over again?
again thanks mate for your effort to help me out
maikel16 said:
Hey man, I've had the same problem with my old Desire (normal). Which was actually broken.. Went back to the store twice and it was sent to htc twice. But that one wasn't rooted tho. But in the end, the sensors were broken & something inside the phone that didn't recon the pc. But also try a full wipe, which helped temporarily for me.
Click to expand...
Click to collapse
maybe this is his problem...
schorschl said:
1. yes i functioned, not only with stock rom, but also with the next few custom roms. but then 2 weeks ago the problem occured and i dont know why. before i used custom roms for months.
2. it also doesnt recognize the mass storage anymore, i dont see the memorycard as a storage device in explorer.
3. yes i turned usb debugging on and connected charging only, i flashed radios before. but the problem with the actual is, that my signalstrength is weak and so i wanted to flash the recommended for this rom, and so i recognized there is something wrong, cause my problem here occured.
normally i sync with myphoneexplorer so i didnt realize that mass storage didnt function anymore.
and because earlier i got no problems, i think more and more, that something on the phone went wrong.
maybe it helps if i go back to stockrom and undo all changes i made, to start all over again?
again thanks mate for your effort to help me out
Click to expand...
Click to collapse
you´re welcome companion
i reded in a spanish forum ( www.htcmania.es ) about your problem and there´s people that had the same problem with a S.GALAXY S & desire HD...
someone was solved it fullwiping and formating (in the paragraph of mounts & storage into CWM) and flashing another ROM... then they formatted their sd card with a card reader OF THE PC... later they was formatted the sd card from the pc and the problem was disapeared successfully...
BUT if it persists i think that you should (mi suggestion) send your machine to the thecnical service....
ok, will try this today evening when i'm home. if this doesnt work i will reset it in the orginial state and send it to the technical support. i will leave a comment if i was successful, perhaps this will help others with the same problem.
schorschl said:
ok, will try this today evening when i'm home. if this doesnt work i will reset it in the orginial state and send it to the technical support. i will leave a comment if i was successful, perhaps this will help others with the same problem.
Click to expand...
Click to collapse
good idea mate
see you soon
finally after long hours of work, i have to state, that nothing changed.
i tried everything, but its still the same.
so i think i will send it in to the technical service.
does anyone of you know if they will say something about the software i changed? because i now i cant go back to stock radio.
thanks for your help.
finally after long hours of work, i have to state, that nothing changed.
i tried everything, but its still the same.
so i think i will send it in to the technical service.
does anyone of you know if they will say something about the software i changed? because i now i cant go back to stock radio.
thanks for your help.
Click to expand...
Click to collapse
oops!!don't say anything LOL! you lose warranty...unroot and disable custom recovery...of your phone flashing an official ruu and then do S-OFF... ITS sufficient..
edit: sorry FOR your DHD
Sent from my Nokia 3210 running the worst symbian using the XDA app powered by LOL
hi mate, i also had the same problem, i connected my dhd to the back usb port of my pc and it was ok. and i also got this problem when i was using a non genuine htc usb cable.
weird!!! can it be possible?
EDIT:I´M using a NOKIA N97 genuine cable and works perfect... LOL
Please help me root this device. I have only ever done my Gs2 a few times with flashing etc, so am basically a complete noob.
I have tried for the last couple of hours and am wanting to go mad. I have followed all the lines about unlocking the device and the fastbook oem unlock, But all it ever tells me is waiting for device. Im guessing im missing drivers, but I have dont the samsung drivers a couple of times, and unzipped and followed the instructions.
Any easier to follow guides or info out there that can help me?
When I plug the phone in to unlock it, i dont get the usual ding from windows, i just get a little thre dings like it doesnt know what it is.
please help. Thanks....
Ps, sorry if I am being stupid or cluttering the forum. cheers..
No help out there at all???
If any one can I will be so grateful, Or if anyone is near to welwyn garden / st albans maybe youd fancy rooting 2 of these nexus' for me and il give you a drink?
Thanks..
Look in the development forum:
http://forum.xda-developers.com/showthread.php?t=1352413
Install the android version of pdanet on your PC... it will uninstall but will leave the drivers you need.
kravevr6 said:
No help out there at all???
If any one can I will be so grateful, Or if anyone is near to welwyn garden / st albans maybe youd fancy rooting 2 of these nexus' for me and il give you a drink?
Thanks..
Click to expand...
Click to collapse
Haven't rooted mine yet, I'll be doing it at the weekend. Had loads of issues with the drivers when I rooted my Nexus S. In the end I installed PDA net on my PC - the drivers installed with that worked fine (you don't actually use PDA net thereafter) Not sure if this works with the GN but you will not do any harm trying it.
Sent from my Galaxy Nexus using XDA App
jaketurbo said:
Look in the development forum:
http://forum.xda-developers.com/showthread.php?t=1352413
Install the android version of pdanet on your PC... it will uninstall but will leave the drivers you need.
Click to expand...
Click to collapse
Beat me to it
Sent from my Galaxy Nexus using XDA App
Cheers guys, Im so new to this, its so frustrating. Its got to be a driver issue. My comp reconises the phone when its on, but when its in bootloader mode, windows is giving me three dull bells when connecting the device....
will have a look at the other thread, Have already read that one I think, and looked so foreign to me!!! lol
I cant pst in the other thread, but have downloaded and installed pda net for android, and when it gets to installing the drivers from the phone, it does it all, ie galaxy nexus , the other driver that i cant remember and the galaxy driver is not installing. Even gone two miles down the road and got a different laptop. no matter what I download or ty and install it just dnt do it.
can some one either make a real simple idiots guide for me the idot, or locally please let me pay you a small fee to root these two phones. Im almost in tears after 5.5 hours of constant crap and pathetiness.
Wishing right now i had not bthered with these phones. At least my s2 and flashing was simple.
It says "waiting for device" because for some crazy reason when you are in fastboot mode Windows (which is what I'm using) uses a different USB driver than when you are in "normal" usb connect mode.
What you need do to sort it out is to go to Device Manager and change the driver to use the Samsung instead of whatever crazy one Windows has decided to use. Then you can carry on with doing the bootloader unlocking.
kravevr6 said:
I cant pst in the other thread, but have downloaded and installed pda net for android, and when it gets to installing the drivers from the phone, it does it all, ie galaxy nexus , the other driver that i cant remember and the galaxy driver is not installing. Even gone two miles down the road and got a different laptop. no matter what I download or ty and install it just dnt do it.
can some one either make a real simple idiots guide for me the idot, or locally please let me pay you a small fee to root these two phones. Im almost in tears after 5.5 hours of constant crap and pathetiness.
Wishing right now i had not bthered with these phones. At least my s2 and flashing was simple.
Click to expand...
Click to collapse
Ok so what have you done so far?
You have the pdanet drivers installed on your pc?
You need to boot into fastboot mode to install the driver you need to root your phone.
*THIS* guide will explain what adb and fastboot are exactly.
*THIS* guide will show you how to set up adb and fastboot.
When unlocking the bootloader you will need the file fastboot.exe which you can put in the root of your c drive for easy access. The atteached file needs to be renamed from .zip to .exe as you cant attach .exe files in xda.
If you have any more questions then just ask .
Mark.
ok..... having gone through similar a few minutes ago.
The drivers kept saying that they had failed to install. kept trying over and over.
then i twigged:
1) made sure debugging mode was on
2) Rebooted the unit into bootloader mode - suddenly the adb driver installed successfully doh !
wonder if this is the same issue you are having ... the adb drivers only install successfully once the nexus is connected via usb and in bootloader mode
of course you may know all that already but it had me stumped for a while
Thank you guys, some good info and detailed posts, which is what I was hoping for! I'm in bed now, but will give this a blast and report back tomorrow!
Really appreciated!
Thanks .......
Sent from my Galaxy Nexus using Tapatalk
Big thanks to everyone. Woke up with a clearer head and proceeded to try again. Done as wilbur said and installed drivers in recovery mode. And perfect.......
after so many problems all was sorted. Then used superboot, and all was ok. 2 galaxy nexus's rooted. think the lesson learnt is to walk away instead of furiously trying things.
Cheers for all the input. What a easy methd ONCE all the drivers are there!!
Cheers people
Glad you got it sorted
I have an epic sitting at home that is useless as of right now because I no longer have a plan through sprint for it. I have a samsung replenish that I am using right now with Boost, and I am considering making it a donor phone and flashing the Epic over to Boost. Having this little thing really makes me realize just how awsome those Super AMOLED displays are. Anyway, I have a few questions before getting neck deep in this little endevour. First off, I don't want to be stuck on Eclair, but as I understand a Factory reset is necessary to get the 3G working, I read that people were abale to flash to Froyo using a few tricks, I was just wondering if the same works for Gingerbread. If anyone is running a Boost Epic on GB I would like to know how it is working out. Also, once the phone is flashed to said version of Android, can I just flash any rom on top of it through CMW without having to make tweaks?
And finally, I can not get either the Replenish or the Epic to read on CDMA Workshop, I have tried debug, non-debug, and diag modes and any combination, I have tried reading the phones in recovery mode, I have rebooted, restarted, unplugged, switched cables and ports....nothing...the phones both show up as modems and have their ports listed in device manager, but they absolutely refuse to show up, if anyone has any tricks that they could share regarding this issue it would be much oblidged
I know it's a lot but I figured I would try and cover all of my questions in one thread rather than making a bunch of seperate ones. BTW I have been researching for 2 days now, if there is something obvious that I missed, I apologize in advance, but I have tried other methods of resolution before creating this thread...Thanks in advance for any advice that you guys can offer...
We have a guide on here did you consult that? And I know that there is an alternative carrier fix for cm9 so you "could" get that puppy on android 4.0 =]. As for the computer not detecting... did you install the mobile drivers for the phones? I think you might need to if you haven't. I know when odining you need those I suppose the same for cdma workshop. Hope this helps at all =]. if you need the guide ill link it here.
Flashing Epic 4g to Boost Mobile Guide.
In this guide he is using the incognito but as long as you have a cdma phone to use as a donor phone you should be fine. If you havnet installed the drivers for either phones then this is most likely your issue. Also according to the guide you CAN flash other ROMs. The only thing that needs to be tweaked is the sms settings.
Yeah, I have looked at the guide, I was hoping to clarify on the few items that I wasn't clear on. I have installed the drivers for both phones and Odin does infact recognize each one, I use it to verify the Com ports that the phones are on...i'm baffled :/
After hours more of trying...and researching..I still can not get past the initial step of getting cdma to read my phones...either of them. Is there a section on this forum for requesting services? I dont care if I have to pay to get it done, I want my epic on boost...
bugzy3188 said:
After hours more of trying...and researching..I still can not get past the initial step of getting cdma to read my phones...either of them. Is there a section on this forum for requesting services? I dont care if I have to pay to get it done, I want my epic on boost...
Click to expand...
Click to collapse
I doubt it... but who knows. I dont see why they wont detect. They should if you have the drivers installed... maybe try just having one of the phones drivers installed at once... which ever phone you have to start off with have that phones drivers installed only. so unistall both then install just one that you need then unistall that one when the other one needs to be used... and you might want to reboot in between driver installations. drivers can be very picky. Or you could try another computer...
I'll give it a shot, its something new at least...I will post my results when I am done..
bugzy3188 said:
I'll give it a shot, its something new at least...I will post my results when I am done..
Click to expand...
Click to collapse
I know some having success doing this because they had their epic touch and epic 4g drivers installed once they unistalled both and just installed the epic 4g the computer would recognize it.
tried uninstalling all samsung mobile drivers and installing the drivers for each phone by themselves, still nothing...I am downloading a new set of drivers now, they are generic Samsung mobile drivers.I'm not expecting much but its all I got at this point...
bugzy3188 said:
tried uninstalling all samsung mobile drivers and installing the drivers for each phone by themselves, still nothing...I am downloading a new set of drivers now, they are generic Samsung mobile drivers.I'm not expecting much but its all I got at this point...
Click to expand...
Click to collapse
HMM i know which samsung drivers work great for the epic but i think you need device specific drivers for the replenish.
32 and 64 bit Drivers I know the drivers here work great and i have used them with every epic i've rooted... I just learned that the drivers im linking you to work for the replenish .
awesome, I am trying them as we speak...
ah crap, those were the same drivers that I downloaded for the Replenish, still a no go...the fact that neither phone works would tell me its on the PC end, and drivers would be the number one suspect, but alas...they just aren't making a difference in my results..
bugzy3188 said:
ah crap, those were the same drivers that I downloaded for the Replenish, still a no go...the fact that neither phone works would tell me its on the PC end, and drivers would be the number one suspect, but alas...they just aren't making a difference in my results..
Click to expand...
Click to collapse
Yeah you might need to try another computer. The usb ports could be bad/out on that one depending on how old it is. Or it could be the usb cable as well you'd be amazed at how much trouble is cause by those. Have you tried a brand new blackberry cable? those are the best cables at getting things recognized. What i dont get is that odin will COM the phone.... and this is in download mode right?
no, it coms both phones in debug mode, I have a few blackberry cables lying around that I have picked up on Amazon that I bought for Odin. Thats what kind of has me scratching my head too. It is an older laptop though, Id say about 4 years old, running windows 7 x64...I have checked QPCT as well just to see if it recognizes the phones and it doesnt either, so I guess it's some issue with my com port's compatibility with the mobile phone software....I will see if I can get away with doing this at work tomorrow, it may be tricky but my boss is old and senile lol
Well I tried it at work with no luck yet, which just leaves human error in to play...not sure what though, I've covered all of the options that I have come across. The replenish I could understand, but the Epic is documented to work just fine with CMDA WS...I just don't get it...
A couple things to try...
1. Connect the phone in normal mode (so it asks mass storage, etc) and let the drivers install.
2. Unplug, turn on USB debugging (Settings -> applictaions -> Development), plug the phone in and let it install ADB driver
3. With phone plugged in switch to dialer and hit ##8778#, then switch USB from PDA to Modem. Your PC should install another driver (Diag port).
Make sure you leave the Epic on this screen while accessing it via CDMAWS or any other program that uses the diag port.
I had major issues with the Epic, but that sequence finally got everything working. I still need to plug the phone in before enabling the diag port, otherwise stupid things happen.
This was all with an XP computer (three actually, before I figured out all the correct steps).
Thanks, I'll try that when I get home, I actually haven't tried putting it in diag mode while plugged in yet, I have always put it in diag and connected it...heres hoping..
ok, I finally got the replenish to connect, I found a way to root it and that worked like a charm....the epic however is still a no go...rooted running CWM 5, in diag mode, switched to modem, recognized as a modem....but still..failed...phone does not answer...any other suggestions guys?
Needs download mode not diag mode whatever that is... hold the 1 on the keyboard and the power button (yellow triangle) make sure is not in modem mode and you must flash the kernel from mkasick for ei22 search in xda "epic 4g gb kernel source" should me the first thread (ei22) kernel source with keyfix. Scroll to the bottom and find the gb3a.tar this is what you odin before cwm5 and it should stick. Then you can flash an su.zip and your done.
Sent from my SPH-D700 using xda premium
ÜBER™ said:
Needs download mode not diag mode whatever that is... hold the 1 on the keyboard and the power button (yellow triangle) make sure is not in modem mode and you must flash the kernel from mkasick for ei22 search in xda "epic 4g gb kernel source" should me the first thread (ei22) kernel source with keyfix. Scroll to the bottom and find the gb3a.tar this is what you odin before cwm5 and it should stick. Then you can flash an su.zip and your done.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
I was on EL30, which from my understanding worked as well. I flashed the gb3a and I am rooted with CWM and I installed SU, I just still can't get cdmaws to see the phone...I tried fix permissions, in CWM, not even sure what that does, but I tried it...i'm desperate lol. I have tried tether mode, switching ports, attempting while in recovery, and I get nadda....EL30 was what I had factory reset to, are you saying that I should flash back to ei22 for cdma or were you saying to do that to get it rooted?
No my appologies I, just read you rooted correctly. I'm not sure why it refuses to recognize the epic. Other than a better cable, or different usb port. I dunno. That or there is gunk in the epics usb port or in the computers. Should be in modem mode I'm assuming if your messing with the phoney. Stuff ='[ sorry.
Sent from my SPH-D700 using xda premium
Hi all,
Got my new S III on Jan. 1. Love it. Gave me an opportunity to use my old Cappy to experiment with. Flashed a couple of ROMS already and really love it. OK..so here's the problem. The only thing I have done with the S III is root it using the QCOM Toolkit. When I downloaded the drivers and plugged in phone it said that if a device number was showing that all drivers had installed. Don't really know if the MTP driver loaded at that time or not...but the device number was there and I proceeded to root the phone. Now when I try to connect to PC I get the dreaded MTP driver failed error message. Did a TON of research on this and tried EVERYTHING...still no joy. I am running Windows 7 Home Premium and even tried using my XP Pro machine...still no joy. Would love to flash a ROM on the new S III but no way to copy to SD card without PC connection.
Phone is A T&T SGH-1747 4.04 Version.
OK to reduce the number of "have you tried's" I have: tried various cables, uninstall reinstall Kies..Kies driver repair, uninstalled/reinstalled all Samsung drivers. Tried the MTP/PTP toggle idea. Plugged in with USB debugging ON and OFF. Sooooo tired of getting the MTP USB Device Driver failed message!!!
Any new ideas out there?
do a factory reset on ur phone
uninstall/install drivers again http://www.samsung.com/us/support/owners/product/SGH-I747MBBATT
after u install drivers open odin and connect phone. it should be recognized
MoeisHere said:
do a factory reset on ur phone
uninstall/install drivers again
after u install drivers open odin and connect phone. it should be recognized
Click to expand...
Click to collapse
Thanks Moe. Yeah I was afraid of that. Just got all my apps restored. Oh well. Well worth it if it works. Thanks again!
Factory reset is the only option that worked for me, and I tried everything you listed above. Also, based on prior posts, I plugged it into my computer before I signed into my google accounts.
sjroberts98 said:
Factory reset is the only option that worked for me, and I tried everything you listed above. Also, based on prior posts, I plugged it into my computer before I signed into my google accounts.
Click to expand...
Click to collapse
Right SJ...I had heard that also. I really hope it works because if I do a factory reset and lose all my apps and data and it doesn't work...I am gonna lose it! LOL!
Okay i have seen similar posts around, and I apologize if this bothers anyone but when I post a thread asking for help, its because I've tried most solutions and have gotten nowhere. I recently bought one.of.these devices and I have to say for an old 1GHz device, its pretty darn smooth! (Got it for my girl who broke her phone. Cost $20 MINT screen, and some scuffs.on the trim believe it or not, fully functional, clean ESN)
I love for all devices in the house to be rooted and off that dreaded Gingerbread android. I have been stuck since i got it trying to use ODIN to flash CWM, and root it to flash a JB based rom. Problem is i installed the drivers, got the ODIN version required, have the CWM tar file, etc, the phone gets detected while on in ADB, normal file transfer way and so on. BUT Download Mode? Nope, i get the dreaded "Unknown Device" issue.
Now as I always read before annoying others, I read that switching the USB cable helps. I've tried 8 USB cables, and no go. 2 Samsungs (i read those are #1 NO GOs), 3 LG cables (device doesnt appear at all), and 3 non brand. No good.
I know Mobile Odin wont work, I rooted it using Framaroot.apk for now, but I need CWM for the rom flashing part.
So now that its 2013, is there really no other way other than ODIN? I tried using ROM Manager, it flashes but doesnt do a thing except boot into stock recovery (miracle no bricks or bootlooping). If I had Linux on my PC, will it get detected or its just the darn cable?
OR is there a specific USB cable brand I should go for that is guaranteed to work? I dont mind buying it just have been waiting to make sure.
Any help or advice is greatly appreciated.
Most people recommend using a BlackBerry cable
Sent from my SPH-D700 using Tapatalk 2
jeffreyjicha said:
Most people recommend using a BlackBerry cable
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
Thank GOSH I read your response in time! I am currently at BestBuy and was going to buy a totally different brand USB. Hopefully they have them here.
Crossvxm said:
Thank GOSH I read your response in time! I am currently at BestBuy and was going to buy a totally different brand USB. Hopefully they have them here.
Click to expand...
Click to collapse
I use this cable and have had zero issues. http://www.monoprice.com/products/p...=10303&cs_id=1030307&p_id=5458&seq=1&format=2
Well there's good news and bad.
Got an official BlackBerry USB cable.
Bad is the device is STILL not recognized.
The drivers have been properly installed, there is no updating the drivers manually, effing Windows won't let me. What the hell can I do now?
If only Mobile Odin worked, or there were other methods, I wouldn't be going thru this mess...
Like where did I go wrong?
I would swap out Windows to Linux, but I don't see how that will get the device detected.
Matter of fact I was trying to install a Linux based OS from my flash drivd, and it corrupted it. Theres 8gb Ill never see again...
Any other ideas? Will Linux pick up the device?
EDIT: This USB unlike the others BRIEFLY detects it as a USB Device, then goes back to unknown when I uninstall it thru Device Manager
Crossvxm said:
Well there's good news and bad.
Got an official BlackBerry USB cable.
Bad is the device is STILL not recognized.
The drivers have been properly installed, there is no updating the drivers manually, effing Windows won't let me. What the hell can I do now?
If only Mobile Odin worked, or there were other methods, I wouldn't be going thru this mess...
Like where did I go wrong?
I would swap out Windows to Linux, but I don't see how that will get the device detected.
Matter of fact I was trying to install a Linux based OS from my flash drivd, and it corrupted it. Theres 8gb Ill never see again...
Any other ideas? Will Linux pick up the device?
EDIT: This USB unlike the others BRIEFLY detects it as a USB Device, then goes back to unknown when I uninstall it thru Device Manager
Click to expand...
Click to collapse
Are you plugging into a port directly on the motherboard? (IE: A port on the back of the machine.) Using an emulated port or hub can cause this at times.
FYI, there are 2 drivers. One is for when the phone is fully booted in Android. The other is the driver when in download mode. Have you tried using another machine?
Sent from my Nexus 7 using Tapatalk 2
I think your issue is driver related. I had similiar issues and updated the wiki with the drivers that ended up working for me.
Sent from my SPH-D700 using xda app-developers app