As the title says basically
My phone will charge from the wall socket but I'm not getting any notifications when I attach it to my netbook. It fails to install the MTP drivers as well. I've had to resort to using a USB MicroSD adaptor when I need to copy files over but its starting to become annoying now.
Anyone have any idea how to get the USB functionality back to my device?
i would like to know too. I just flashed doomkernal and i cant get wifi to work, (even after enabling wifi in the build.prop) and it fails to install drivers when i connect it to my computer, i cannot enter mass storage mode.
Solved.
I flashed BLENDMIUI
Sent from my R800i using xda premium
Related
Could someone help me on this issue. When i connect my phone via usb to my laptop and on other different laptops/computers i've tried so far, it only charges the phone without mounting sd card or allowing data transfer. I'm using an O2 branded stock htc desire running on froyo. i want to root my phone and install install a custom rom. i don't know how or if possible to make a goldcard without using a usb connection cable to a laptop/pc and for the other processes of rooting and installing a custom rom.
I took it for repairs and a new port was put in and still same problem persists.
You know that you have to manually select mount sd. Also have you tried to connect it via adb, not to transfer files but to see if i usb connection works?
Sent from my HTC Desire using XDA App
For the adb connection, I think this will require USB cable connection or it's there a way to do this without USB cable connection.
Sent from my HTC Desire using XDA App
scorror said:
Could someone help me on this issue. When i connect my phone via usb to my laptop and on other different laptops/computers i've tried so far, it only charges the phone without mounting sd card or allowing data transfer. I'm using an O2 branded stock htc desire running on froyo. i want to root my phone and install install a custom rom. i don't know how or if possible to make a goldcard without using a usb connection cable to a laptop/pc and for the other processes of rooting and installing a custom rom.
I took it for repairs and a new port was put in and still same problem persists.
Click to expand...
Click to collapse
Once you plug in your USB cable, you have to pull the top bar down and manually select to use it as a usb 'disk'...only then will you be able to load it with custom ROM.
As for rooting, I think you need to enable USB debugging for the UnRevoked method....
Evil_Cid said:
Once you plug in your USB cable, you have to pull the top bar down and manually select to use it as a usb 'disk'...only then will you be able to load it with custom ROM.
As for rooting, I think you need to enable USB debugging for the UnRevoked method....
Click to expand...
Click to collapse
when i select it to use as usb disk, the laptop doesn't see it, same for usb debugging.
i tried using a usb hub with four ports to connect my phone to the laptop, the message i get is that '' this usb device is not recognised''. Pls why that message
Any help on this issue. I've been reading on usb brick phones and how to unbrick it. The problem is even when phone is connected via usb in fastboot mode, it still say device is not recognised. i was trying to get the CID number of the phone. i've never rooted or flash a custom rom yet. i started experiencing this when the phone fell on a concrete floor. i don't know if this is hardware related problem or software related.
ok basically phone wont go into mass storage mode when connected to computer and it isnt recognized by odin or the the computer at all and let me get all these out of the way before im asked
ok first yes driver are installed properly i even installed kies twice and just the drivers from the samsung website to make sure i wasnt messing up somewhere
and then...
i also tried doing a nandroid of blazer rom and getting back to the gingerbread just so my phone would be recognized that also did not work
and then..
i just now bought the mobile odin app and tried flashing the stock eko2 kernel this did not work either
and then...
ive used the original USB cord and the one i bought to day as well as several different computers just to see if the pop up as recognized with show but nothing happens my phone seems like its no longer capable of going into mass storage mode
and then...
moved this here hoping someone has has this issue hopefully you guys can help ill be up all night so feel free to resond whenever thanks guys
make sure your phone is disconnected from the computer and then try going into the settings and in the top section that is wireless and networks press more, then USB utilities, and press connect storage to PC and then plug your phone into the computer. had about the same problem and came across that.
You can also try going into your device settings on your pc (samsung/modem) and resetting the driver it seems to get "stuck" sometimes.
RigorousNinja said:
make sure your phone is disconnected from the computer and then try going into the settings and in the top section that is wireless and networks press more, then USB utilities, and press connect storage to PC and then plug your phone into the computer. had about the same problem and came across that.
Click to expand...
Click to collapse
yea this same method works for me too when the pc doesnt recognize it
I tried the USB utilities but it only popped up with MTP initialization and then MTP connected but when I click connect it tells me remove USB chord
Sent from my SPH-D710 using XDA App
ross4747 said:
I tried the USB utilities but it only popped up with MTP initialization and then MTP connected but when I click connect it tells me remove USB chord
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
mine told me to remove it too. so i had to click connect *before* plugging in the usb cable
ejbmvp said:
mine told me to remove it too. so i had to click connect *before* plugging in the usb cable
Click to expand...
Click to collapse
yea thats what i did and thats when i got the MTP initialization and connected messages but no response from my PC
RigorousNinja said:
make sure your phone is disconnected from the computer and then try going into the settings and in the top section that is wireless and networks press more, then USB utilities, and press connect storage to PC and then plug your phone into the computer. had about the same problem and came across that.
Click to expand...
Click to collapse
+1 to this... its the new way to connect
I put this on my sd card (by taking the card out of the phone) and putting it in a card reader. I flashed the file from the stock recovery and this gave me custom recovery. Then I restored my previous backup. I was having the same issue and FB21 has too many bugs. I went back to gingerbread but kept fb21 modem.
You can actually get MTP working quite simply...
ssconceptz said:
To use USB MTP you have to unmount SD Card first then plug in.
Click to expand...
Click to collapse
Credit goes to ssconceptz for the workaround
neatchee said:
You can actually get MTP working quite simply...
Did this and that got my computer to acknowledge I had connected my phone but not it says unrecognized, so I'm going to uninstall kies and then reinstall again and see if that helps
Credit goes to ssconceptz for the workaround
Click to expand...
Click to collapse
Sent from my SPH-D710 using XDA App
OK that also didn't work I have mobile Odin on my.phone is it possible to use it to go back to stock?
Sent from my SPH-D710 using XDA App
OK I've gotten my PC to know when my phone is connected but no matter how many times install the drivers or uninstall and install kies or use the MTP method you guys talked about it still comes up unrecognized device I tried going into device manager and updating them myself unfortunately that didn't help it kept giving me the code. 10 device is unable to start any ideas?
Sent from my SPH-D710 using XDA App
My computer won't detect my Epic 4g when it's powered up, with either Debugging enabled or disabled. BUT, it does detect it when the phone is in Download Mode.
I have tried several different cables on all my usb ports. And the cable and port that I am currently connected with works perfectly on my other Epic 4g...
I wanted to root this Epic, but couldn't get computer to recognize it. When I plug it in when phone is powered up, I get no notification in the sys tray, nothing new shows up in device manager, no new drives show in My Computer, Odin doesn't recognize any devices.
So I put phone into DL Mode, plugged it in, and the computer recognized it, installed drivers, and Odin installed both Kernal-GB-3a and ACSRecovery1.0.0.5 successfully!
But when I boot the phone back up in order to copy the Superuser zip file onto SD card, same problem as before... Whether I click "Connect storage to PC" on phone or not, computer doesn't acknowledge.
Any advice?
(phone was on stock EL30 prior, fyi)
Thanks!
Remove ur current drivers and reinstall them manually. Www.samsung.com/support.
Select d700
Sent from my SPH-D700 using xda premium
U might have a bad stock flash. Also try redoing it
Sent from my SPH-D700 using xda premium
This happened to me with my 2 Epics, one connected the other did not. Had to reinstall the drivers...weird.
Sent from my SPH-D700 using xda premium
when you allow windows to automatically install the drivers, it doesn't always install the drivers properly. but when you manually install them, the installation process assures that they are ALL installed properly.
My epic asks if Iwant to connect to usb storage before the pc "sees" it
jcole2424 said:
My computer won't detect my Epic 4g when it's powered up, with either Debugging enabled or disabled. BUT, it does detect it when the phone is in Download Mode.
I have tried several different cables on all my usb ports. And the cable and port that I am currently connected with works perfectly on my other Epic 4g...
I wanted to root this Epic, but couldn't get computer to recognize it. When I plug it in when phone is powered up, I get no notification in the sys tray, nothing new shows up in device manager, no new drives show in My Computer, Odin doesn't recognize any devices.
So I put phone into DL Mode, plugged it in, and the computer recognized it, installed drivers, and Odin installed both Kernal-GB-3a and ACSRecovery1.0.0.5 successfully!
But when I boot the phone back up in order to copy the Superuser zip file onto SD card, same problem as before... Whether I click "Connect storage to PC" on phone or not, computer doesn't acknowledge.
Any advice?
(phone was on stock EL30 prior, fyi)
Thanks!
Click to expand...
Click to collapse
what you want to do is dial ##8778# and switch the bottom one to pda and the top to modem thats the problem trust me i tried installing the drivers and reinstalling it dont work... do this and its a gaurentee to work
I used to be able to plug my phone into my PC and slide down the notifications to enable a USB connection but I'm unable to anymore.
I checked that debug is on. I've even tried via the Wifi Settings USB Connection method. The phone will charge but is not seen by the PC. I've tried other PCs and other cables. It doesn;t show up in Device manager and I've also tried the windows drivers for the phone.
The only thing that has changed in the past month or so is that I replaced my Clockwork Recovery module with the stock recovery module and my phone is no longer rooted. Any ideas anyone?
ingrouille said:
I used to be able to plug my phone into my PC and slide down the notifications to enable a USB connection but I'm unable to anymore.
I checked that debug is on. I've even tried via the Wifi Settings USB Connection method. The phone will charge but is not seen by the PC. I've tried other PCs and other cables. It doesn;t show up in Device manager and I've also tried the windows drivers for the phone.
The only thing that has changed in the past month or so is that I replaced my Clockwork Recovery module with the stock recovery module and my phone is no longer rooted. Any ideas anyone?
Click to expand...
Click to collapse
Just enable USB storage before plugging in
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Like I said I tried the Mass Storage connection method via the menu in Wifi Settings. The onscreen instructions say to enable then to plug in. Still get nothing.
Try reinstalling the driver that might do the trick. I am having the same issue but I am running the unofficial cm9.. good luck to us both and is it the same cable u always been using cause I bought 2$ cable off eBay it only charges no USB connection
Sent From Galaxy Bigger Than Yours.
I tried to re-install drivers and I'm using a known working cable - the one that came with the phone.
It really is strange. The only thing that has happened recently is my phone was rooted with Clockwork Recovery and then I reverted back to stock.
I'll see what happens after the ICS update comes from Telus next month, I guess.
Not a big deal as I can use AirDroid to transfer stuff over wifi.
Since rebooted a couple times now everything is working. I also had a problem with the lock screen rotating and phone defaulting to speakerphone. everything is back to normal now but i wish i knew what caused it.
Hello all!
First: I promise I searched the forums and google as hard as I could!
I'm running AOKP JB with CWM, although the problem was present on stock ICS from T-Mobile.
Symptoms: Computer and phone will refuse to acknowledge any connection (nothing shows up in Device Manager), except the phone will still charge. If I do the "remove the battery with USB plugged in" trick, the first time I do it, it will recognize an unknown device, but kies and adb won't recognize it. If I unplug it and plug it back in, it'll go back to not acknowledging any connection.
I previously programmed it (when I was still running stock ROM) via ADB via WiFi, but I need to be able to use ADB via USB. Besides, I can't seem to get ADB over WiFi anymore.
When I plug it into a different computer (Win7), it will, however, recognize my phone.
Earlier this year, before I ever tried programming via WiFi, it connected to my Win8 machine with no problem. I don't think it's a problem with the wifi setup though because the ROM was reinstalled and of course I've restarted ADB in USB mode in the months since...
What I've tried:
Reinstalling Kies
Reinstalling Samsung USB drivers
[^]Restarting the ADB server
Updating ADB
Trying different USB cables
Trying different USB ports
Toggling USB debugging
Toggling MTP mode
The UART thing from the dialer
Restarting the phone and the computer (of course)
Checking to see if my computer's USB drivers need to be updated
The android terminal command "setprop persist.sys.usb.config mass_storage,adb"
Pulling and replacing the battery while connected via USB
Crying in a corner
If anyone can help me, it'd be greatly appreciated! I'm all out of ideas and Google is no longer helpful =/
try to uninstall the drivers that are present anything samsung related to your drivers ... then connect the phone and let the process do its thing if you have the samsung drivers saved on your PC and the drivers still aint working update the drivers and then manually click where the drivers are to install them and hopefully it will work and when you tried MTP is it the only option it gives you no storage or anything ??... and is usb debugging on when you are trying all this ??
krazierokz said:
try to uninstall the drivers that are present anything samsung related to your drivers ... then connect the phone and let the process do its thing if you have the samsung drivers saved on your PC and the drivers still aint working update the drivers and then manually click where the drivers are to install them and hopefully it will work and when you tried MTP is it the only option it gives you no storage or anything ??... and is usb debugging on when you are trying all this ??
Click to expand...
Click to collapse
I tried on my work computer that didn't have any samsung drivers and when the "unknown device" dialog popped up it didn't do anything or install anything, nor did it show up in Device Manager. Unplugging and replugging it back in did not reproduce the dialog box. Togged USB Debugging and still no dialog box saying it recognized it.
The thing with the samsung drivers is that they're self installing so even if it popped up in Device Manager, I wouldn't be able to manually update the drivers =/
I tried MTP both with and without USB Debugging, although it also gives the option for PTP.
At this point do you think I should unroot and go back to stock? It's not been recognized on three computers now! =[
Are you using the stock cable? My computer wouldn't recognize mine without it.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
foltz61 said:
Are you using the stock cable? My computer wouldn't recognize mine without it.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
Both the stock cable and a generic cable.
Similar problem
Similar problem as the OP. And hi guys, it's nice to be on these forums.
My device, when I plug it in using the stock cable, doesn't even charge. It doesn't show up in device manager, nor does it give me a notification, or say it's unsupported and bear that yellow icon. I have tried using different USB ports, I have tried the toggling USB debugging, I have tried restarting phone, computer, and taking out battery. I have tried that PDA/MODEM dialer trick. I am using 4.1.2 Jellybean, not rooted. (that WAS my goal,, until I hit this roadblock) I have not connected it to the computer in the past, it's relatively new. I'm thinking the cable is bust.
Any suggestions would be appreciated. It charges fine through a wall outlet plug, be it generic or stock.
so guys ive come to a conclusion i think its something in the samsung usb cables try getting yourself a blackberry usb cable , TRUST ME !!! ever since i got my phoness etc... tablet and yadi yadi samsung usb cables have always seemed to give me problems i think its because they are multi data/charging cables and when using the blackberry usb cable i have never ever once encountered a problem with any of my phones sd/storage problems do yourself a favor and pick up one of those cables and you will be golden !! if not then i guess im the only lucky one :LOL here you go http://www.amazon.com/Blackberry-Travel-Adapter-Micro-Cable/dp/B004VMVSYK/ref=pd_sim_cps_2 5 bucks!
Edit also one more test boot into recovery and click in the advanced menu and see if mount usb works for you in recovery mode ??
FIX (try using a generic cable)
I actually solved it on my own! After borrowing a generic cable from a friend it booted up! The Samsung cable was just not doing its thing.
yeah im telling you those cables they provide are JUNK!!! i only use my samsung to charge because they do that well but data they are str8 CRAP!! glad you got it up and going
OP
Hope OP will have the same luck as me...pray to the Android gods...
Lol:thumbup:
Sent from my SAMSUNG-SGH-T989 using xda app-developers app