Develop Bugs

[Q] Possibly hard bricked T-mobile SGS 2

Hi everyone!
I have a bricked SGS2 from t-mobile. I can't tell exactly what has been flashed to it before, because it wasn't done by me. After flashing a rom it's bricked.
At the moment I can't get it into download mode or turn it on. The screen is black.
Things I've tried and they didn't work:
1. Charge the battery in case it's disscharged. (the phone is charging the battery, but there are no indication lights)
2. Remove battery>press vol up and vol down>insert usb cable.
3. I bought a usb jig and it also doesn't work. ( I followed all instruction how to get it work)
4. When I connect the phone to the PC (with battery or without it) the PC offers me to format the drive I inserted, and every 5 seconds the phone drive gets disconected and connected again after each time windows offers me to format the drive.
5. When I press the power button- nothing happens.
Anyone could help me? Has anyone sorted this kind of problems?

N7105 - SDCard Mode and ODIN

Hi I managed to to get to SDCARD Download mode from a dead boot N7105 using the SD Boot Repair SD. Odin recognizes this and phone was previously on 4.3 JellyBean already. Now when I'm trying to flash with Odin 3.09 , it says "There is no PIT partition" . Should I click the Phone Bootloader Update checkbox also? Need some advice from all the gurus here to guide me along this, thank you very much

Hi guys,
I have a very similar scenario but with an Samsung Galaxy S3 i9300:
Couple of days ago my phone went into booting loop but after removing the battery for a couple of minutes the issue was solved.
Then 3 days later it restart out of the sudden and was stuck on the Samsung Galaxy S III splash screen.
I rebooted and tried putting the phone in Download mode. The phone went into the Samsung Galaxy S III screen twice and turn off not to boot again. Seems like a hard bricked, no response with any buttons combinations.
I read other posts here saying that I could probably boot the phone with an micro sd card. So I donwloaded image I9300UBUGML1_I9300UWHUGMK1_I9300UBUGMK1_HOME from SamMobile and mouted in a 16 Gb type 10 micro SD (my phone is also 16 Gb version)
At first I tried booting the phone pressing the power button for about 10 seconds and the screen ligthted up very quickly (less than a second) saying
SDCARD MODE
UP KEY: NORMAL BOOTING
DOWN KEY: DOWNLOAD MODE
But it was so quick that I was not able to press anything.
A day later I figure out that if I was quick enough I could press down key and put the phone on Download mode (SDCARD)
After putting the phone on Download mode I connected the phone to the PC and tried flashing it with ODIN v3.07
Odin is able to see the device but when trying to flash the phone (selecting PDA and the image mention before) a message came up saying:
There is no PIT partition
And failed.
Reading about this error in this forum, I have tried using different PIT files to re-partion the phone but no success so far.
GT-I9300_mx_20120220.pit
GT-I9300_mx_20120322.pit
GT-I9300_mx_20120329.pit
mx.pit
Odin stays on Get PIT for mapping after initializing the process.
I would like to know if anyone here have an idea on what else to try (before talking about JTAG reparing the phone as I am not 100% the phone is hard bricked)
I have not attempted to use a USB Jig yet, should I?
Other details:
I am not able to get the download with any other image file in the sd card.
If the phone is on download mode and connected to the PC, the battery can be removed and the phone stays on.
If I press up key in the SD CARD Mode the phone freezes.
Do you guys have any ideas here?
Thanks,

[Q] Debrick.img Needed Hard Bricked I9195, N Dload mode, No Recovery

My Samsung galaxy s 4 mini bricked it self apparently. STOCK ROM 4.2.2
It was rooted nothing more, only some small mods for the framework.
put my phone to charge and went to sleep. was late to because the alarm didn't ring. i took my phone to check why it didn't ring, and nothing. no light, no sound nothing. i took out the battery put it back in try to start nothing.
Anyway it doesn't get detected by odin, can't access download mode nor recovery mode. Only thing when connected to pc is installs driver for QHSUSB_DLOAD. I have tried different ways to fix it and the only way without sending my phone somewhere to service is to boot the phone through sdcard.
http://forum.xda-developers.com/attachment.php?attachmentid=2541005&d=1390771555
ValenteL has provided a .zip file that you run in recovery either which one you have and it should give a .img file at the size of 128mb into your sdcard
Those who have the debrick.img file from a stock 9195 4.2.2, would you be kind and sen it to me so that i can try fix my s4 mini
also i have already tried a debrick.img but from a 9192 don't know the firmware version but it didn't do anything

Here you go. http://d-h.st/XK5V .. Extract the downloaded file and u will get img file in a folder.

sasank360 said:
Here you go. http://d-h.st/XK5V .. Extract the downloaded file and u will get img file in a folder.
Click to expand...
Click to collapse
Thanks for the debrick image but it seems my phone it totally bricked only JTAG or a real service could fix it. if you have any knowledge in this part could it be that the sdcard i used are too slow? i have used 16GB class 2 and a 8GB class 4, still no sign.
Edit: 16GB class 2 and 8GB class 4 works fine for boot through sdcard

I could say it has progressed a little i am using the 16GB class 2 sdcard and when i plug it to the computer the phone vibrates but no qhsusb_dload is detected and odin also finds nothing
Edit: When the phone vibrates it indicates that it is turned on, mine only took a little while to go to the boot recovery mode but failed to boot the os and switched mode to either factory mode or odin mode.

The Debrick.img worked fine just need to hold down power button for like 10-15 seconds. but it seems like my phone has a broken partition, i9195 connects to odin but cannot be flashed because of, false pit file? i have read that the pit file needs to correspond to the gb model the phone is and the firmware version for instance 16GB 4.2.2, so now i need a .pit file to be able to continue the recovering process of my phone.

It is better to use a class 10 sd card.
Check the general section for the thread that explains how to unbrick using pit file.

Hey my Phone just vibrates but there is nothing on the screen and my computer downst detect anything how did you get through that vibration

Link Down
Hey, could you please provide another link for the image? Dev-host won't work anymore...

DamnedSon said:
Hey, could you please provide another link for the image? Dev-host won't work anymore...
Click to expand...
Click to collapse
can someone send working debrick.img ??
i found one on net but not work for my i9195. I was trying with 16gb class 4 and 128gb XC 1 and different card adapters and no success. nothing to appear on my device, i was trying with power button and with USB JIG and nothing. When i plug device to PC nothing appears. but when I put it to PC without microsd appears qhsusb_dload. I dont uderstand why this not work for me.
Here are all events:
1) no microsd with battery => Qualcomm HS-USB QDLoader 9008 (COM4) and after 10 sec disconnect
2) no microsd without battery => USB Input Device and after 5 sec disconnect and than Qualcomm HS-USB QDLoader 9008 (COM4) and after 7 sec disconnect
3) with microsd with battery => nothing happen
4) with microsd without battery => USB Input Device and after 5 sec reconnect and again again again .... infinity...
this makes me crazy, what to do?? i am on windows 10

cro.dev said:
can someone send working debrick.img ??
i found one on net but not work for my i9195. I was trying with 16gb class 4 and 128gb XC 1 and different card adapters and no success. nothing to appear on my device, i was trying with power button and with USB JIG and nothing. When i plug device to PC nothing appears. but when I put it to PC without microsd appears qhsusb_dload. I dont uderstand why this not work for me.
Here are all events:
1) no microsd with battery => Qualcomm HS-USB QDLoader 9008 (COM4) and after 10 sec disconnect
2) no microsd without battery => USB Input Device and after 5 sec disconnect and than Qualcomm HS-USB QDLoader 9008 (COM4) and after 7 sec disconnect
3) with microsd with battery => nothing happen
4) with microsd without battery => USB Input Device and after 5 sec reconnect and again again again .... infinity...
this makes me crazy, what to do?? i am on windows 10
Click to expand...
Click to collapse
Hi
i've found this 2
- debrick.img 4.4.2 -> LINK (https://mega.nz/#!T9hxAJQC!e74HQeHhU66fmPFVFOLdxTtFyR-fxntfc37qFb22oRA)
- debrick.img 4.2.2 -> LINK (http://d-h.st/XK5V)
you can try them
i am in your same situation, i have 4.4.2 nobrand last Firmware I9195XXUCPB1_I9195ITVCPB2_I9195XXUCPB1_HOME.tar.md5
with bootloader CF-Auto-Root-serranolte-serranoltexx-gti9195.tar.md5
but noone of the 2 image make my phone boot again (i see it connect on USB if i dont have the SD CARD inserted)
i have tried some old SD CARD and the last ..i used a "modern" Sandisk Ultra 16GB HC I , and it is a 10 Class
but the recovey boot wont come on !!
and suggestions ?
maybe that 2 debrick img are fault , or it is needed a specific IMG ?
thank you for any help
updage.. i've found other brick images and then i were able to boot my phone ...here
https://www.youtube.com/watch?v=p5J9oW_BV5k
but the phone started to go on continuos reboot.... only once it got stoped on an error message and then i were able to connect wtih ODIN ,just for once to try to flas the boot loader but odin sent me an error of "pit missing" and the the phone got stucked
i could not connect once more becouse now it is again IN CONTINUOS REBOOT STATE during recovery from SD CARD
any one can help me to try to "fix" this ? or have maybe a better image file
thank you

lizthe said:
Hi
i've found this 2
- debrick.img 4.4.2 -> LINK (https://mega.nz/#!T9hxAJQC!e74HQeHhU66fmPFVFOLdxTtFyR-fxntfc37qFb22oRA)
- debrick.img 4.2.2 -> LINK (http://d-h.st/XK5V)
you can try them
i am in your same situation, i have 4.4.2 nobrand last Firmware I9195XXUCPB1_I9195ITVCPB2_I9195XXUCPB1_HOME.tar.md5
with bootloader CF-Auto-Root-serranolte-serranoltexx-gti9195.tar.md5
but noone of the 2 image make my phone boot again (i see it connect on USB if i dont have the SD CARD inserted)
i have tried some old SD CARD and the last ..i used a "modern" Sandisk Ultra 16GB HC I , and it is a 10 Class
but the recovey boot wont come on !!
and suggestions ?
maybe that 2 debrick img are fault , or it is needed a specific IMG ?
thank you for any help
updage.. i've found other brick images and then i were able to boot my phone ...here
https://www.youtube.com/watch?v=p5J9oW_BV5k
but the phone started to go on continuos reboot.... only once it got stoped on an error message and then i were able to connect wtih ODIN ,just for once to try to flas the boot loader but odin sent me an error of "pit missing" and the the phone got stucked
i could not connect once more becouse now it is again IN CONTINUOS REBOOT STATE during recovery from SD CARD
any one can help me to try to "fix" this ? or have maybe a better image file
thank you
Click to expand...
Click to collapse
which .img from link you used for successfull booting up? And which microsd you used? I still havent any success. Can you help me? Thanks

on that youtube page you can find an extenal link to a cloud space where you can find several image
i dont rember wich one worked for me ..i had to try some of them ...but anyway it doesnt matter becouse it depends on your mobile,firmware revision .etc ect
try some of them until you find one

lizthe said:
on that youtube page you can find an extenal link to a cloud space where you can find several image
i dont rember wich one worked for me ..i had to try some of them ...but anyway it doesnt matter becouse it depends on your mobile,firmware revision .etc ect
try some of them until you find one
Click to expand...
Click to collapse
I tried all of them and no one work. Which microsd card you used?

cro.dev said:
I tried all of them and no one work. Which microsd card you used?
Click to expand...
Click to collapse
16gb HC 10
---------- Post added at 04:52 PM ---------- Previous post was at 04:50 PM ----------
lizthe said:
16gb HC 10
Click to expand...
Click to collapse
if you have similar SD i suppose that you have a different BOOT ........and this is the reason you are not able to boot (i hope you "see" your phone connected to the pc in a way becouse i am supposing it ......otherwise your phone is death and nothing works)

lizthe said:
16gb HC 10
---------- Post added at 04:52 PM ---------- Previous post was at 04:50 PM ----------
if you have similar SD i suppose that you have a different BOOT ........and this is the reason you are not able to boot (i hope you "see" your phone connected to the pc in a way becouse i am supposing it ......otherwise your phone is death and nothing works)
Click to expand...
Click to collapse
I bought kingstone 16gb class 10 and tried all images and no success. again same results, if I use 9195l images pc recognize device like without sdcard, if I put 9195 images than pc dont recognize it, and without battery loop. I am not smart now what to do :/ how can I see what was firmware on my device? can i make some image of working s4 mini? because i have one which works. do you turned on device with usb-jig or just by pressing power?

J0SH1X said:
Hey my Phone just vibrates but there is nothing on the screen and my computer downst detect anything how did you get through that vibration
Click to expand...
Click to collapse
For who have same problem :
This means the phone's battery is low. Just charge the battery.

Do you guys have a debrick.img for galaxy s4 mini (19190) 4.2.2 jellybean version?
If you do have debrick.img for s4 mini (19190) 4.2.2 jellybean version pls can i have a link to that, my phone's been dead for over a year now and i can't find a working debrick.img for that model. Pls if you do have let me know. Thank you

link files img ???

S4 Mini (GT-i9190) Help me - S.O.S ... debrick.img

Hi guys!!!
I m new here and i have a big problem and i think you can help me.
My galaxy S4 mini (gt-i9190) dead. I wasnt able to turn in on, charge it, there was no respond so it was completely dead. Only when I connect to pc recognized driver.
I found some solution with debrick image here on forum (debrick_4.4.2, but when i putted debrick.img (found some for I9190 android 4.4.2 on web) into sd card via win32diskmanager and inserted it into my phone i was able to get some respond by a phone.
Withou debrick image on sd cart i can't turn my phone on at all but with inserted debrick image i have a chance to turn it on but with some kind of boot loop.
With debrick image on sd cart i can put my phone in odin mode but i can t do nothhing with it. When I connect my phone in ODIN, it recognizes, i can install a rom (firmware 4.4.2 by sammobile) satisfactorily. But my phone now when i try put it in recovery booting only i see this .... (recovery booting ... set warranty bit: recovery after see android imagen lying and this phrase ... any commands)
Help meeeee pls!!!

Hi mate.....did u find the solution?

S4 mini Gt-i9190 using sd card with debrick.img boot recovery mode is looping

TL,DR:my s4 mini got a random android update and when it finished updating the evie launcher and touchwis stopped working then android stopped working, got frozen and then shut down after, some time i got it to enter odin mode put the stock rom and got into boot loop with samsung logo, i turn it off after some time, now it wont boot into anything, if a put a sd card with debrick img this apear and only this, if reboot and that msg show again
Boot recovery mode
check boot partitions
copy from t-flash
boot recovery
write 1390008 sections
reboot
_________________________________
Long explanation:
My movistar brand samsung S4 mini (the phone contract ended so i change service provider so they did gave me a code and the phone was free from the contract and now it can accept any service provider) gt-i9190 2 year ago died after a chash in the system, i did have the evie launcher and a different keyboard (not using touchwis) the evie launcher stopped working then touchwis stopped working the phone home menu got to the simple layout then the phone freased and after a couple of second it shut down all this in less than 1 min t and never turn on again, i have a new phone but i will like to use the s4 mini for a proyect but its not starting,
i put an SDXC UHS-I class 10 A1 with a debrick.img(i did try 2 .img from this forum and the phone enter boot recovery mode and show this
__________________________
Boot recovery mode
check boot partitions
copy from t-flash
boot recovery
write 1390008 sections
reboot
________________________
then reboot and the same msg this for more than 30 mins then it stopped until i reconnect it to the pc or the charger or try to turn it on using the power botton, when the phone stop rebooting the normal convinations of keys make it vibrate for 3-4 times but nothing shows in the screen, the bottom convination make it vibrate just after the reboot part and the boot recovery mode dont show again until i stop pressing the bottom comvination then it start the boot recovery loop again, the boot dont fail or at least it do not say it, it just stop trying to rebootafter a long time, its like if its waiting for something to be done by me, like using the botton combination to enter download mode but well idk what to do plz help
Time line of what happened so far
2018
phone died after random update of android OS , though it was his time as i own it for + 5 years
2019
got a new phone and got curious about what happened so i started looking the internet , ended in this website almost everytime.
i left the phone chargin while i searched for answers, i connected the phone to my pc, try the botton combination to get to download mode and recovery(not succesfull) , removed the battery, try to turn it on without baterry to drain all power of phone and restart volatile memory (multiple times) and put it again without gettin anywhere try to connected to a netbook that was freshly formated and with fresh windows 10 intall, odin in that pc recognise the phone just as Qloader-9008 com (x) continued searching and from nowhere the phone started vibrating and then stoped and the chargin icon apeared on the screen i left it to charge as that was the first time i was 100% sure it was chargin after 10+ hours chargin while i was sleeping i try the botton to enter download mode and it worked, try the stock rom from my model, country and service provider and the phone got stuck on a boot loop showing the movistar intro then the s4 mini intro and vibratin each time it was to late so i stupidly turn it of, next morning i got back to try make it work but now it was totally unresponsive odin didn recognize the phone, didnt enter download mode or recovery , no boot loop, nothing is only make a sound in my pc when i try the botton combinations but nothing more just a sound of something connecting and disconnectingx2 got frustrated and left it there collecting dust, also the usb jig dont work
2020
4 months ago i got back to try to make the s4 mini work so i searched the internet again and found the sd card way i did try it and now im here with the phone in a loop of rebootin an starting the same boot recovery mode, it do not say "Flash write failure Ddi : mmc_read dailed" as i did read on other threads in this forum so as i stated before
i put an SDXC UHS-I class 10 A1 with a debrick.img and the phone enter boot recovery mode and show this
__________________________
Boot recovery mode
check boot partitions
copy from t-flash
boot recovery
write 1390008 sections
reboot
________________________
then reboot on a loop and the same msg this for more than 15 mins then it stopped until i reconnect it to the pc or the charger or try to turn it on using the power botton, when the phone stop rebooting the normal convinations of keys make it vibrate for 3-4 times but nothing shows in the screen, the boot dont fail or at least it do not say it, it just stop trying to reboot,
what can i do to at least get it to a point that kies or smart switch can take the controll or be able to use odin, the battery is at 3.78volts

If you can get your S4mini into Download mode, you should try Odin again. But this time, under the Options tab, UNcheck the box for Auto Reboot as well as the box for F. Reset Time. And then when Odin gives the green success indication, immediately disconnect USB and remove battery. Re-insert the battery after a minute or so. Another suggestion; flash the Movistar firmware only if you intend to use their carrier service. Otherwise, it would be better to use firmware not specific to any one carrier. Be sure the 3rd letter of the baseband code is "U" (for "unspecified" carrier). Good luck, hopefully your troubles are not due to faulty hardware.

HY to me happend tha Same my S4-Mini has showing Error in instand and after a tryed to Reboot the Phone was Complete DEAD , tryed the to Boot From SD- Card BOOT RECOVERY MODE it Says FLASH WRITE FAILURE ddi MMC read Failed ! Via odin same happens cant Write Read and NO PIT Partiion FOUND a Tryed also WiTH PIT FAIL .. IT LOOK MY S4- Mini Is Complete DEAD at least the emmc Chip

Happened to me aswell... When i put my SD card with debrick.img on then it bootloops the exackt same way. Cant find any prog or any help to avoid this. Cant even see the phone in Odin no matter with or without the sd card - Or get it to download mode either... i only see the Qualcomm 9008 port as open in device manager

Titanity said:
Happened to me aswell... When i put my SD card with debrick.img on then it bootloops the exackt same way. Cant find any prog or any help to avoid this. Cant even see the phone in Odin no matter with or without the sd card - Or get it to download mode either... i only see the Qualcomm 9008 port as open in device manager
Click to expand...
Click to collapse
How long your has lasting until it died myn was 8 Jears

DEXXO said:
How long your has lasting until it died myn was 8 Jears
Click to expand...
Click to collapse
I need a solution, not a competition in the fails

Titanity said:
I need a solution, not a competition in the fails
Click to expand...
Click to collapse
It was just a question plz dont Cry , and there is no solution your emmc sandisk memory is death 99% buy new or repair good luck