Related
@edit i whrited the wrong model.....it I747 NOT 797
Again....excuse if i'm posting on the wrong place cause i'm really newbie on this forum things......
My problem is that while tring to reinstall my 4.3 droid i went to this thread http://forum.xda-developers.com/showthread.php?t=2498233 and tried using these files to get another rom, so as it mentioned i started flashing the boot loader but via odin i coudn't as odin negated to proceed due to errors. Them i triede odin multiloader them i tried TWRP them i ended up messing everythin tring via Clock work mod recovery. I just got the process well done and them when the system tries to boot it just won't boot. The eternal black screen looks like i have to a Hard Brick and even if while i try the usb cable the computer responds to the device, i couldn't take it to Download Mode.
After some research i have see that it's possible to make a debrick via SD card.
So.....i'm exactly........cring for help, any good soul that have a litle time to explain me a couple things if i can or i cannot debrick it without spending money. IS my time is running cause i got my SIM card cut and this is my only phone now.
Sorry again for anything.......hope somthing comes but while it not come i will keep researching thanks verybody.
@update Now i'm stuck on how to get to a folder on the terminal of ubuntu to mount the img file to the sd card
Farahjr said:
Again....excuse if i'm posting on the wrong place cause i'm really newbie on this forum things......
My problem is that while tring to reinstall my 4.3 droid i went to this thread http://forum.xda-developers.com/showthread.php?t=2498233 and tried using these files to get another rom, so as it mentioned i started flashing the boot loader but via odin i coudn't as odin negated to proceed due to errors. Them i triede odin multiloader them i tried TWRP them i ended up messing everythin tring via Clock work mod recovery. I just got the process well done and them when the system tries to boot it just won't boot. The eternal black screen looks like i have to a Hard Brick and even if while i try the usb cable the computer responds to the device, i couldn't take it to Download Mode.
After some research i have see that it's possible to make a debrick via SD card.
So.....i'm exactly........cring for help, any good soul that have a litle time to explain me a couple things if i can or i cannot debrick it without spending money. IS my time is running cause i got my SIM card cut and this is my only phone now.
Sorry again for anything.......hope somthing comes but while it not come i will keep researching thanks verybody.
Click to expand...
Click to collapse
yes you can use your sd card to revive your AT&T Samsung Galaxy S3 I747 assuming thats what you have
2nd always research before you flash or modify your phone
3rd if you can get your phone into download mode then its not hard bricked ....shutdown device and then (hold the power button + home button + volume down button at the same time) wait until the phone lights up with the download page
4th odin back to stock (sorry am too tired to find one) start from here http://forum.xda-developers.com/showthread.php?t=1725839
5th if its bricked try this thread http://forum.xda-developers.com/showthread.php?t=2525902&page=3
hope that helps
edit: if that does not help use this link http://forum.xda-developers.com/showthread.php?t=2345860
get a usb jtag if you cant access download mode
doesnt work Mobiletechvideos.com is there to debrick your phone for a good price
winosxbuntu said:
yes you can use your sd card to revive your AT&T Samsung Galaxy S3 I747 assuming thats what you have
2nd always research before you flash or modify your phone
3rd if you can get your phone into download mode then its not hard bricked ....shutdown device and then (hold the power button + home button + volume down button at the same time) wait until the phone lights up with the download page
4th odin back to stock (sorry am too tired to find one) start from here http://forum.xda-developers.com/showthread.php?t=1725839
5th if its bricked try this thread http://forum.xda-developers.com/showthread.php?t=2525902&page=3
hope that helps
Click to expand...
Click to collapse
1-Yes it's a AT&T i747 as i had my self upgrading downgrading upgrading again and rooteing the device the last time. I think that i possibly flashed something on these steps that gave me this problem after tring to flash the method on the link that i mentioned.
5- It's hard bricked cause i can't go into download mode. I'm reading this http://forum.xda-developers.com/showthread.php?p=43305728
I forgot to say....i'm not helpfull with the thecnical english language. I'm a braziliam and i really to only get the most simple threads that i can just in case to not comit any mistakes due to language issues.
My nightmares have come.......so i'm just installing a Virtual Machine fo Ubuntu and try to load the img to an 8gb SD series 4 i know that the recomended is 16 gb 10 series but i will try the process anyway just to get experience.
But still wanna help if anybody comes with more! thanks!
Farahjr said:
1-Yes it's a AT&T i747 as i had my self upgrading downgrading upgrading again and rooteing the device the last time. I think that i possibly flashed something on these steps that gave me this problem after tring to flash the method on the link that i mentioned.
5- It's hard bricked cause i can't go into download mode. I'm reading this http://forum.xda-developers.com/showthread.php?p=43305728
I forgot to say....i'm not helpfull with the thecnical english language. I'm a braziliam and i really to only get the most simple threads that i can just in case to not comit any mistakes due to language issues.
My nightmares have come.......so i'm just installing a Virtual Machine fo Ubuntu and try to load the img to an 8gb SD series 4 i know that the recomended is 16 gb 10 series but i will try the process anyway just to get experience.
But still wanna help if anybody comes with more! thanks!
Click to expand...
Click to collapse
cry a little, maybe the phone will accept your apologizes and resurrect from the dead
again it may not work so don't get your hopes up to high ITS A TRIAL AND ERROR situation WITH HARD BRICKS...........
some people have successfully debricked their device, so again you have to be patient and know exactly what you are doing and dont panic
Remember Mobiletechvideos.com can fix it in less than 25 minutes depending on your phone :laugh:and they are affordable :good:
Your pretty much stuck if you can't recover via SD card.
Remember there are a lot of options for JTAG repair, research local repairs by Kijiiji and also places like Mobile Tech Videos. Always search for legitimacy and best price.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
winosxbuntu said:
cry a little, maybe the phone will accept your apologizes and resurrect from the dead
again it may not work so don't get your hopes up to high ITS A TRIAL AND ERROR situation WITH HARD BRICKS...........
some people have successfully debricked their device, so again you have to be patient and know exactly what you are doing and dont panic
Remember Mobiletechvideos.com can fix it in less than 25 minutes depending on your phone :laugh:and they are affordable :good:
Click to expand...
Click to collapse
I'm almost crying. As a brazilian those devices are a litle difficult to access as i should need to import and the Dollar is expensive for me that's why i will try every way it's possible before tring someeone that have a box on brazil and pay for it.
Now i'm stuck on how to get to a folder on the terminal of ubuntu to mount the img file.
@update i have done with the burning img thing. It won't worked but i shall try again tomorrow with a 16GB serie 10 SD card!
Octopus
Farahjr said:
I'm almost crying. As a brazilian those devices are a litle difficult to access as i should need to import and the Dollar is expensive for me that's why i will try every way it's possible before tring someeone that have a box on brazil and pay for it.
Now i'm stuck on how to get to a folder on the terminal of ubuntu to mount the img file.
@update i have done with the burning img thing. It won't worked but i shall try again tomorrow with a 16GB serie 10 SD card!
Click to expand...
Click to collapse
I couldn't get a card with those parameters........
For my lucky......my company has purchased an octopus box that supports SGH-I747...i never used this before never saw never touched i'm just reading tutorials but a i couldn't find any tutorial about unbricking with the box. Any one know if it's possible to solve this easily via box???
Farahjr said:
I couldn't get a card with those parameters........
For my lucky......my company has purchased an octopus box that supports SGH-I747...i never used this before never saw never touched i'm just reading tutorials but a i couldn't find any tutorial about unbricking with the box. Any one know if it's possible to solve this easily via box???
Click to expand...
Click to collapse
Octopus box will not do this work in contact with the support so now i am waiting for the arive of the micro SD 16 GB class10. Will update the post when it arrives.
Farahjr said:
Octopus box will not do this work in contact with the support so now i am waiting for the arive of the micro SD 16 GB class10. Will update the post when it arrives.
Click to expand...
Click to collapse
Tried via sd but nothing happened.
Will try again with another image and charging the battery.
winosxbuntu said:
yes you can use your sd card to revive your AT&T Samsung Galaxy S3 I747 assuming thats what you have
2nd always research before you flash or modify your phone
3rd if you can get your phone into download mode then its not hard bricked ....shutdown device and then (hold the power button + home button + volume down button at the same time) wait until the phone lights up with the download page
4th odin back to stock (sorry am too tired to find one) start from here http://forum.xda-developers.com/showthread.php?t=1725839
5th if its bricked try this thread http://forum.xda-developers.com/showthread.php?t=2525902&page=3
hope that helps
edit: if that does not help use this link http://forum.xda-developers.com/showthread.php?t=2345860
get a usb jtag if you cant access download mode
doesnt work Mobiletechvideos.com is there to debrick your phone for a good price
Click to expand...
Click to collapse
Is it 100% chance to get in to download mode via JIG????
I'm having trouble tring to refind the all the possible debrick images that I should try so i'm thinking about doing a JIG by my self. Any free solution i will try before spending any Money on something I don't know if will really work.
Farahjr said:
Is it 100% chance to get in to download mode via JIG????
I'm having trouble tring to refind the all the possible debrick images that I should try so i'm thinking about doing a JIG by my self. Any free solution i will try before spending any Money on something I don't know if will really work.
Click to expand...
Click to collapse
if its hard bricked then its a 50/50 chance, i would recommend trying to boot using the debrick.img on the SD-CARD and hope some magic will happen otherwise yu might have to spend some money to fix or just buy a new phone
Can’t access to Download Mode or Recovery Mode after bricking AT&T Galaxy S3 i744 4.3
Hi I have (had) a AT&T galaxy S3 i747 with android 4.1.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Because the phone is in another country I couldn’t update it by OTA to android 4.3
So I started to read forums that said how to Update AT&T S3 i747 to android 4.3 (I747UCUEMJB)
The S3 was not Root
I installed all the phone drivers in the computer
This is what I did: (http://forum.xda-developers.com/showpost.php?p=52341582&postcount=38)
- Use Odin 3.07
- Check Auto Reboot and Re-Partition, and uncheck all the boxes
- I put my phone in USB debugging in the developer options
- I turned it off
- Started to put the phone on Download Mode pressing volume DW+home+power button at the same time
- In Odin on the PDA box I checked and loaded the file .tar.md5 (I747UCUEMJB_2024954_REV04_user_low_ship.tar.md5 )
- Pressed the button Start
The installation seemed to go right, the program never showed anything weird.
When the Programs finished the installation the phone turned off and then turned on and show the logo of android (seemed to be lying down or inclined) and after that it turned off.
The computer showed that something was connected (QHSUSB_DLOAD) but couldn’t install any driver, so I disconnected it of the computer.
I couldn’t turn on the phone :crying:, I took the battery out and put it in and tried to start the phone and nothing happened, I tried pressing any button to access to recovery o download mode and none of this worked.
I started to search forums that talk about restart or turn on a brick AT&T S3 i747
I found one (http://forum.xda-developers.com/showthread.php?t=2549068) that said to download a image (debrick-SGH-I747U-CUEMJB3.img) and using the program “Win32DiskImager” to put the image inside of a micro SD to make the phone turn on,
I put the micro SD inside the phone and when I pushed the power button for almost 3 seconds it Turned on , the phone seems to be fine an it has android 4.3 (I747UCUEMJB) installed.
I can use it normally so far.
But the problem is that I can’t turn on the phone if the micro SD card is not inserted on the phone.
Without the micro SD inside don’t show any sign of life
When the micro SD is inside I can turn on the phone and use its apps.
I have tried to enter to Recovery mode or Download mode with the micro SD inside but the phone only show what its supposed to happen for 1 second then turns off and then turns on by its own (after that I can use it normally)
Does anyone know how can I Fix my phone ?
How can I boot my phone without using the micro SD card?
How can I access to download mode?
And if I could access to download mode what should I do next ?
The only files I have now are:
Odin3 v3.07
I747UCUEMJB_2024954_REV04_user_low_ship.tar.md5(905 Mb)
debrick-SGH-I747U-CUEMJB3.img (80 Mb)
I747
winosxbuntu said:
if its hard bricked then its a 50/50 chance, i would recommend trying to boot using the debrick.img on the SD-CARD and hope some magic will happen otherwise yu might have to spend some money to fix or just buy a new phone
Click to expand...
Click to collapse
It's been a while sorry about beinging away.
A guy who says that have a JTAG service tried and coudn't recover it. So I left it there because it have a broken display and a broken firmware and it' is from outside Brazil and after the FIFA CUP Anatel will lock operation of devices that models are not sold on Brazil and I747 is probably included on the list.
So i gave up from my phone and bought a Nexus 5.
The case is closed!
Maralex1520 said:
Hi I have (had) a AT&T galaxy S3 i747 with android 4.1.1 View attachment 2790321
Because the phone is in another country I couldn’t update it by OTA to android 4.3
So I started to read forums that said how to Update AT&T S3 i747 to android 4.3 (I747UCUEMJB)
The S3 was not Root
I installed all the phone drivers in the computer
This is what I did: (http://forum.xda-developers.com/showpost.php?p=52341582&postcount=38)
- Use Odin 3.07
- Check Auto Reboot and Re-Partition, and uncheck all the boxes
- I put my phone in USB debugging in the developer options
- I turned it off
- Started to put the phone on Download Mode pressing volume DW+home+power button at the same time View attachment 2790322 View attachment 2790323
- In Odin on the PDA box I checked and loaded the file .tar.md5 (I747UCUEMJB_2024954_REV04_user_low_ship.tar.md5 )
- Pressed the button Start View attachment 2790324
The installation seemed to go right, the program never showed anything weird. View attachment 2790325
When the Programs finished the installation the phone turned off and then turned on and show the logo of android (seemed to be lying down or inclined) and after that it turned off.
The computer showed that something was connected (QHSUSB_DLOAD) but couldn’t install any driver, so I disconnected it of the computer.
I couldn’t turn on the phone :crying:, I took the battery out and put it in and tried to start the phone and nothing happened, I tried pressing any button to access to recovery o download mode and none of this worked.
I started to search forums that talk about restart or turn on a brick AT&T S3 i747
I found one (http://forum.xda-developers.com/showthread.php?t=2549068) that said to download a image (debrick-SGH-I747U-CUEMJB3.img) and using the program “Win32DiskImager” to put the image inside of a micro SD to make the phone turn on,
I put the micro SD inside the phone and when I pushed the power button for almost 3 seconds it Turned on , the phone seems to be fine an it has android 4.3 (I747UCUEMJB) installed.View attachment 2790326
I can use it normally so far.
But the problem is that I can’t turn on the phone if the micro SD card is not inserted on the phone.
Without the micro SD inside don’t show any sign of life
When the micro SD is inside I can turn on the phone and use its apps.
I have tried to enter to Recovery mode or Download mode with the micro SD inside but the phone only show what its supposed to happen for 1 second then turns off and then turns on by its own (after that I can use it normally)
Does anyone know how can I Fix my phone ?
How can I boot my phone without using the micro SD card?
How can I access to download mode?
And if I could access to download mode what should I do next ?
The only files I have now are:
Odin3 v3.07
I747UCUEMJB_2024954_REV04_user_low_ship.tar.md5(905 Mb)
debrick-SGH-I747U-CUEMJB3.img (80 Mb)
Click to expand...
Click to collapse
Here's what you can do to get the device back to working and booting normally. If the Odin flash failed first time, you should not use this flash again. Instead you should use custom recovery to flash a complete 4.3 stock restore image.
1) Download the stock restore image from the following thread. I always prefer to use TWRP and thus, the TWRP image, because of the easier user interface.
http://forum.xda-developers.com/showthread.php?t=2658486
Save the file to a location on your computer.
2) Download the Odin flashable TWRP Tar file for custom recovery from the link below ....
http://techerrata.com/file/twrp2/d2att/openrecovery-twrp-2.6.3.1-d2att.tar
With the debrick card in your phone, boot to system as you have been doing. Connect your phone to your computer with a good quality micro USB cable and copy the stock restore image you downloaded earlier to your phone. Be sure you remember the stored location.
3) Power off your phone and, with the debrick card, boot to download mode. If you cannot use the Volume Down, Power and Home button combo to boot to download mode, you may need to get a USB jig.
4) Once you are in download mode, connect your phone to the PC, open Odin v3.07. Make sure Odin recognizes your phone. Do not check or uncheck any boxes but leave the defaults as is. In the PDA box, load the TWRP Tar file you downloaded earlier. Click on Start and wait for flashing to complete. When you get to Pass, disconnect your phone from the PC and pull out the battery to stop it trying to reboot.
5) Replace the battery and with the debrick card inside, boot to Recovery mode by pressing the Volume Up, Power and Home buttons. If you do this right, you should be able to get to recovery mode.
6) Select Install and navigate to the stock restore zip file you saved to your phone earlier. Select this zip and swipe to confirm install. Wait for firmware installation (flashing) to complete.
7) Clear your cache/dalvikand reboot to system.
Try booting without the card. If the above process went as described, your phone should be booting normally. Good luck!
Stuck in AT&T logo
Larry2999 said:
Here's what you can do to get the device back to working and booting normally. If the Odin flash failed first time, you should not use this flash again. Instead you should use custom recovery to flash a complete 4.3 stock restore image.
1) Download the stock restore image from the following thread. I always prefer to use TWRP and thus, the TWRP image, because of the easier user interface.
http://forum.xda-developers.com/showthread.php?t=2658486
Save the file to a location on your computer.
2) Download the Odin flashable TWRP Tar file for custom recovery from the link below ....
http://techerrata.com/file/twrp2/d2att/openrecovery-twrp-2.6.3.1-d2att.tar
With the debrick card in your phone, boot to system as you have been doing. Connect your phone to your computer with a good quality micro USB cable and copy the stock restore image you downloaded earlier to your phone. Be sure you remember the stored location.
3) Power off your phone and, with the debrick card, boot to download mode. If you cannot use the Volume Down, Power and Home button combo to boot to download mode, you may need to get a USB jig.
4) Once you are in download mode, connect your phone to the PC, open Odin v3.07. Make sure Odin recognizes your phone. Do not check or uncheck any boxes but leave the defaults as is. In the PDA box, load the TWRP Tar file you downloaded earlier. Click on Start and wait for flashing to complete. When you get to Pass, disconnect your phone from the PC and pull out the battery to stop it trying to reboot.
5) Replace the battery and with the debrick card inside, boot to Recovery mode by pressing the Volume Up, Power and Home buttons. If you do this right, you should be able to get to recovery mode.
6) Select Install and navigate to the stock restore zip file you saved to your phone earlier. Select this zip and swipe to confirm install. Wait for firmware installation (flashing) to complete.
7) Clear your cache/dalvikand reboot to system.
Try booting without the card. If the above process went as described, your phone should be booting normally. Good luck!
Click to expand...
Click to collapse
Hi thanks for the solution, it worked now i dont need the micro SD to boot the S3 but now i have a problem, i can turn on the phone normally but it stucks in the AT&T logo and after that the phone turns off so i can not accsess to apps. I hope you can help me to fix this problem
Maralex1520 said:
Hi thanks for the solution, it worked now i dont need the micro SD to boot the S3 but now i have a problem, i can turn on the phone normally but it stucks in the AT&T logo and after that the phone turns off so i can not accsess to apps. I hope you can help me to fix this problem
Click to expand...
Click to collapse
Okay. At least, we are almost there. Try booting into recovery mode and doing a hard wipe/reset. If this doesn't work, then you could try reinstalling the 4.3 stock firmware. You may need to reflash custom recovery as the initial flashing would have returned you to stock recovery. If you have to do the firmware flashing again, please make sure you clear your cache/dalvik before rebooting to system.
happy to see this thread resolved, this is what XDA is all about, no matter how fd up something sounds, a community like xda will find a fix for it even if it takes months
And the award of the Q/A thread goes to Larry and everyone in this post for trying and failing but succeeding at the end :laugh:
anywayz happy rooting and be careful, no-one wants to end with a brick cheers and keep this place awsome
Galaxy S3 i747 fixed after hardbrick
Larry2999 said:
Here's what you can do to get the device back to working and booting normally. If the Odin flash failed first time, you should not use this flash again. Instead you should use custom recovery to flash a complete 4.3 stock restore image.
1) Download the stock restore image from the following thread. I always prefer to use TWRP and thus, the TWRP image, because of the easier user interface.
http://forum.xda-developers.com/show....php?t=2658486
Save the file to a location on your computer.
2) Download the Odin flashable TWRP Tar file for custom recovery from the link below ....
http://techerrata.com/file/twrp2/d2a....3.1-d2att.tar
With the debrick card in your phone, boot to system as you have been doing. Connect your phone to your computer with a good quality micro USB cable and copy the stock restore image you downloaded earlier to your phone. Be sure you remember the stored location.
3) Power off your phone and, with the debrick card, boot to download mode. If you cannot use the Volume Down, Power and Home button combo to boot to download mode, you may need to get a USB jig.
4) Once you are in download mode, connect your phone to the PC, open Odin v3.07. Make sure Odin recognizes your phone. Do not check or uncheck any boxes but leave the defaults as is. In the PDA box, load the TWRP Tar file you downloaded earlier. Click on Start and wait for flashing to complete. When you get to Pass, disconnect your phone from the PC and pull out the battery to stop it trying to reboot.
5) Replace the battery and with the debrick card inside, boot to Recovery mode by pressing the Volume Up, Power and Home buttons. If you do this right, you should be able to get to recovery mode.
6) Select Install and navigate to the stock restore zip file you saved to your phone earlier. Select this zip and swipe to confirm install. Wait for firmware installation (flashing) to complete.
7) Clear your cache/dalvikand reboot to system.
Try booting without the card. If the above process went as described, your phone should be booting normally. Good luck!
Click to expand...
Click to collapse
Hey Larry2999 I want to really thank you for your help it was so helpful, actually I discovered that the battery of the Galaxy S3 was failing thats why when I turned on the phone it turned off after a seconds althoughthe battery was charged, so I connected the charger to the phone and it started normally. Now I can use it and it has android 4.3.
Your method was right, and thanks to take the time to answer. I hope it can help someone else too.
Maralex1520 said:
Hi thanks for the solution, it worked now i dont need the micro SD to boot the S3 but now i have a problem, i can turn on the phone normally but it stucks in the AT&T logo and after that the phone turns off so i can not accsess to apps. I hope you can help me to fix this problem
Click to expand...
Click to collapse
Hey I cannot get into download mode, and I´m exactly in the same problem you were. How did you get into download mode? I haven´t used usb JIG since I cannot get one from where i live.
I´ll be really thankful in you help me!:angel:
Maralex1520 said:
Hey Larry2999 I want to really thank you for your help it was so helpful, actually I discovered that the battery of the Galaxy S3 was failing thats why when I turned on the phone it turned off after a seconds althoughthe battery was charged, so I connected the charger to the phone and it started normally. Now I can use it and it has android 4.3.
Your method was right, and thanks to take the time to answer. I hope it can help someone else too.
Click to expand...
Click to collapse
Glad to know it's working fine now.
---------- Post added at 03:02 PM ---------- Previous post was at 03:01 PM ----------
feta9310 said:
Hey I cannot get into download mode, and I´m exactly in the same problem you were. How did you get into download mode? I haven´t used usb JIG since I cannot get one from where i live.
I´ll be really thankful in you help me!:angel:
Click to expand...
Click to collapse
Did you try getting into download mode with the 3-button combo (Volume Down/Power/Home)?
HAS ANYONE ELSE HAVE THIS ISSUE!!!
WON'T ALLOW BOOT INTO RECOVERY!!
Tired to flash the Wicked ROM for the I747 S3 model and right after wiping and flashing the ROM, the device shut off. Once I went to wipe and restore because clearly this ROM didn't work. I ended up with:
Could not do normal boot.
ODIN MODE
PRODUCT NAME: SGH-I747
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: Enabled
WARRANTY BIT: 1
BOOTLOADER AP SWREV: 2
I'm not doing this for warranty purposes, I'm just trying to revive my phone whether it be with or without root access.
Since you can get into download, try installing a custom recovery via Odin such as Philz Touch and then try to get into recovery. Maybe you existing recovery has been corrupted.
Perfect. Got it up and running. Thanks
Sent from my SAMSUNG-SGH-I337 using Tapatalk
P. Dexter85 said:
Perfect. Got it up and running. Thanks
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
Remember, as long as you are able to boot either in download mode or even your bootloader, you're pretty much guaranteed to get your phone back up and running. Although lets say you cannot access both, then you'll need to JTAG your device which may be difficult depending on your skill set in that area.
Can’t access to Download Mode or Recovery Mode after bricking AT&T Galaxy S3 i744 4.3
Hi I have (had) a AT&T galaxy S3 i747 with android 4.1.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Because the phone is in another country I couldn’t update it by OTA to android 4.3
So I started to read forums that said how to Update AT&T S3 i747 to android 4.3 (I747UCUEMJB)
The S3 was not Root
I installed all the phone drivers in the computer
This is what I did: (http://forum.xda-developers.com/showpost.php?p=52341582&postcount=38)
- Use Odin 3.07
- Check Auto Reboot and Re-Partition, and uncheck all the boxes
- I put my phone in USB debugging in the developer options
- I turned it off
- Started to put the phone on Download Mode pressing volume DW+home+power button at the same time
- In Odin on the PDA box I checked and loaded the file .tar.md5 (I747UCUEMJB_2024954_REV04_user_low_ship.tar.md5 )
- Pressed the button Start
The installation seemed to go right, the program never showed anything weird.
When the Programs finished the installation the phone turned off and then turned on and show the logo of android (seemed to be lying down or inclined) and after that it turned off.
The computer showed that something was connected (QHSUSB_DLOAD) but couldn’t install any driver, so I disconnected it of the computer.
I couldn’t turn on the phone :crying:, I took the battery out and put it in and tried to start the phone and nothing happened, I tried pressing any button to access to recovery o download mode and none of this worked.
I started to search forums that talk about restart or turn on a brick AT&T S3 i747
I found one (http://forum.xda-developers.com/showthread.php?t=2549068) that said to download a image (debrick-SGH-I747U-CUEMJB3.img) and using the program “Win32DiskImager” to put the image inside of a micro SD to make the phone turn on,
I put the micro SD inside the phone and when I pushed the power button for almost 3 seconds it Turned on , the phone seems to be fine an it has android 4.3 (I747UCUEMJB) installed.
I can use it normally so far.
But the problem is that I can’t turn on the phone if the micro SD card is not inserted on the phone.
Without the micro SD inside don’t show any sign of life
When the micro SD is inside I can turn on the phone and use its apps.
I have tried to enter to Recovery mode or Download mode with the micro SD inside but the phone only show what its supposed to happen for 1 second then turns off and then turns on by its own (after that I can use it normally)
Does anyone know how can I Fix my phone ?
How can I boot my phone without using the micro SD card?
How can I access to download mode?
And if I could access to download mode what should I do next ?
The only files I have now are:
Odin3 v3.07
I747UCUEMJB_2024954_REV04_user_low_ship.tar.md5(905 Mb)
debrick-SGH-I747U-CUEMJB3.img (80 Mb)
BUMP
Maralex1520 said:
Hi I have (had) a AT&T galaxy S3 i747 with android 4.1.1 View attachment 2790296
Because the phone is in another country I couldn’t update it by OTA to android 4.3
So I started to read forums that said how to Update AT&T S3 i747 to android 4.3 (I747UCUEMJB)
The S3 was not Root
I installed all the phone drivers in the computer
This is what I did: (http://forum.xda-developers.com/showpost.php?p=52341582&postcount=38)
- Use Odin 3.07
- Check Auto Reboot and Re-Partition, and uncheck all the boxes
- I put my phone in USB debugging in the developer options
- I turned it off
- Started to put the phone on Download Mode pressing volume DW+home+power button at the same time View attachment 2790297View attachment 2790298
- In Odin on the PDA box I checked and loaded the file .tar.md5 (I747UCUEMJB_2024954_REV04_user_low_ship.tar.md5 )
- Pressed the button Start View attachment 2790299
The installation seemed to go right, the program never showed anything weird. View attachment 2790300
When the Programs finished the installation the phone turned off and then turned on and show the logo of android (seemed to be lying down or inclined) and after that it turned off.
The computer showed that something was connected (QHSUSB_DLOAD) but couldn’t install any driver, so I disconnected it of the computer.
I couldn’t turn on the phone :crying:, I took the battery out and put it in and tried to start the phone and nothing happened, I tried pressing any button to access to recovery o download mode and none of this worked.
I started to search forums that talk about restart or turn on a brick AT&T S3 i747
I found one (http://forum.xda-developers.com/showthread.php?t=2549068) that said to download a image (debrick-SGH-I747U-CUEMJB3.img) and using the program “Win32DiskImager” to put the image inside of a micro SD to make the phone turn on,
I put the micro SD inside the phone and when I pushed the power button for almost 3 seconds it Turned on , the phone seems to be fine an it has android 4.3 (I747UCUEMJB) installed.View attachment 2790301
I can use it normally so far.
But the problem is that I can’t turn on the phone if the micro SD card is not inserted on the phone.
Without the micro SD inside don’t show any sign of life
When the micro SD is inside I can turn on the phone and use its apps.
I have tried to enter to Recovery mode or Download mode with the micro SD inside but the phone only show what its supposed to happen for 1 second then turns off and then turns on by its own (after that I can use it normally)
Does anyone know how can I Fix my phone ?
How can I boot my phone without using the micro SD card?
How can I access to download mode?
And if I could access to download mode what should I do next ?
The only files I have now are:
Odin3 v3.07
I747UCUEMJB_2024954_REV04_user_low_ship.tar.md5(905 Mb)
debrick-SGH-I747U-CUEMJB3.img (80 Mb)
Click to expand...
Click to collapse
I'm in the same situation. Please if anyone could shed some light on the problem listed above.
Thanks in advance.
is thread still alive?.im having the same issue as op but when ever i flash a cwm or twrp recovery odin says pass and phone reboots to the same screen again..anybody have suggestion? my device is also i747
Flash cwm or twrp using Odin but don't check anything except f.reset time. When you see the word reset in the status window, disconnect USB cable, pull the battery, and boot into recovery.
no recovery still whatsoever..idk what my phone is up to..anything i try to flash with odin seems to fail except recovery..but even when it says pass it isnt installed?!.if i flash stock rom it says no pit partition but i already have the pit..curiously i noticed that my counter never increase..still 0 no matter how many times i flash cwm/twrp recovery..im not on 4.3 yet so im really freaked out..
Are you checking auto reboot in Odin when flashing recovery?
@audit13
Checked or unchecked yields same results..im smelling a fried emmc..might need board replacement..hard to find someone to replace emmc here in ph..
BUMP
Maralex1520 said:
Hi I have (had) a AT&T galaxy S3 i747 with android 4.1.1 View attachment 2790296
Because the phone is in another country I couldn’t update it by OTA to android 4.3
So I started to read forums that said how to Update AT&T S3 i747 to android 4.3 (I747UCUEMJB)
The S3 was not Root
I installed all the phone drivers in the computer
This is what I did: (http://forum.xda-developers.com/showpost.php?p=52341582&postcount=38)
- Use Odin 3.07
- Check Auto Reboot and Re-Partition, and uncheck all the boxes
- I put my phone in USB debugging in the developer options
- I turned it off
- Started to put the phone on Download Mode pressing volume DW+home+power button at the same time View attachment 2790297View attachment 2790298
- In Odin on the PDA box I checked and loaded the file .tar.md5 (I747UCUEMJB_2024954_REV04_user_low_ship.tar.md5 )
- Pressed the button Start View attachment 2790299
The installation seemed to go right, the program never showed anything weird. View attachment 2790300
When the Programs finished the installation the phone turned off and then turned on and show the logo of android (seemed to be lying down or inclined) and after that it turned off.
The computer showed that something was connected (QHSUSB_DLOAD) but couldn’t install any driver, so I disconnected it of the computer.
I couldn’t turn on the phone :crying:, I took the battery out and put it in and tried to start the phone and nothing happened, I tried pressing any button to access to recovery o download mode and none of this worked.
I started to search forums that talk about restart or turn on a brick AT&T S3 i747
I found one (http://forum.xda-developers.com/showthread.php?t=2549068) that said to download a image (debrick-SGH-I747U-CUEMJB3.img) and using the program “Win32DiskImager” to put the image inside of a micro SD to make the phone turn on,
I put the micro SD inside the phone and when I pushed the power button for almost 3 seconds it Turned on , the phone seems to be fine an it has android 4.3 (I747UCUEMJB) installed.View attachment 2790301
I can use it normally so far.
But the problem is that I can’t turn on the phone if the micro SD card is not inserted on the phone.
Without the micro SD inside don’t show any sign of life
When the micro SD is inside I can turn on the phone and use its apps.
I have tried to enter to Recovery mode or Download mode with the micro SD inside but the phone only show what its supposed to happen for 1 second then turns off and then turns on by its own (after that I can use it normally)
Does anyone know how can I Fix my phone ?
How can I boot my phone without using the micro SD card?
How can I access to download mode?
And if I could access to download mode what should I do next ?
The only files I have now are:
Odin3 v3.07
I747UCUEMJB_2024954_REV04_user_low_ship.tar.md5(905 Mb)
debrick-SGH-I747U-CUEMJB3.img (80 Mb)
Click to expand...
Click to collapse
peego said:
I'm in the same situation. Please if anyone could shed some light on the problem listed above.
Thanks in advance.
Click to expand...
Click to collapse
I'm also in this same situation. I revived my S3 from a long time being bricked so I can give it to my daughter and found myself in this same situation. It would only boot with the debrick sd card and won't boot into download mode. It would only stay for 1/2 a sec and then reboot. Has anyone been able to crack this? Thanks!
A tiny help
Hi, i have been really disconected of this.
Good and big bad news.
The good is could fix the phone, the bad is i dont remenber the procedure i did to fix it, i just searched in many forums, and tried many methods and downloaded some files that helped me to fix it. the only thing i remenber is i download a .rar that contain the android 4.3 for the samsung i747. Even though i dont remind what i did, hope this pictures of the files i used to recover the phone works for you.
if you find this files on the web, or when i have time to upload them hope they can help you.
sorry, but thats what a i call this a small and insignificant Help
vagosto said:
I'm also in this same situation. I revived my S3 from a long time being bricked so I can give it to my daughter and found myself in this same situation. It would only boot with the debrick sd card and won't boot into download mode. It would only stay for 1/2 a sec and then reboot. Has anyone been able to crack this? Thanks!
Click to expand...
Click to collapse
I have not had to use a debrick image myself. I have read where once you have the phone booted using a debrick image you can remove the card and replace it with one holding a ROM image which can then be flashed from a custom recovery. If you don't have a custom recovery installed you may be able to install the ROM with adb/fastboot after changing the cards. If this is not clear, there may be a better worded answer posted in one of the debrick threads.
Thanks. I already have the other sd card with the rom, kernel, etc. ready to flash but since I don't have custom recovery, I'm stuck. I remember seeing a thread mentioning about using adb/fastboot. I'll continue searching.
vagosto said:
Thanks. I already have the other sd card with the rom, kernel, etc. ready to flash but since I don't have custom recovery, I'm stuck. I remember seeing a thread mentioning about using adb/fastboot. I'll continue searching.
Click to expand...
Click to collapse
this may help.
http://forum.xda-developers.com/showthread.php?t=2225405
http://forum.xda-developers.com/showthread.php?t=2317790
"all i can really do , is stay out of my own way and let the will of heaven be done"
Great thanks!
your welcome :thumbup:
"all i can really do , is stay out of my own way and let the will of heaven be done"
so i mistakenly flashed a rom that was meant for the i900 or something and i got hardbricked and im not sure what steps to take or anything.
I know that i can buy this thing to make it go to download mode, but ive already tried doing the not jtag or Jig method but i used my Sandisk Micro Sdcard 8gb Class 4 instead since i dont have the 16gb class 10 version. what do i do?
ive used the windsik 32 image writer to write the
debrick sphl710.img to that microsdcard and idk what to do now. my batter was at 75% charger aswell and also i noticed if i removed the battery and the sdcard and cable and plug in just the usb cable (connected to my pc) it showed a red led light and then it turned off after a bit and my computer read a driver was missing with QHDSLOAD or something like that.
Go download Odin, go find twrp recovery for your phone, get the tar file, open Odin, put your phone in download mood, uncheck auto reboot and reset time, click pda, select the tar, after Odin recognizes your phone then click start. If it says pass then disconnect, power off, boot into your recovery, and flash something like Rooted stock ND8.
I don't normally flash the wrong roms, but occasionally crap won't work no matter how many times I re-download or flash. All that seems to work is flash a new recovery and then boot into it and flash the rom I needed.
ok so i had the latest cm13 rom on my phone partition is in ext4 had many issues with the rom so i went to flash the stock rom with odin
while the firmware was loading my usb cable failed and an error popped up saying odin process was aborted then the com port went empty (the phone disappeared) no the phone will not go into download mode while trying to get into download mode every thing looks good till you press the up button an you go to odin mode but with a message: firmware upgrade encountered an issue. please select recovery mode in kies and try again.
however my pc will not recognize my phone any more and i can not get into recovery either
in fact if i just plug the phone in it boots up to this message screen without even touching any buttons
I have tried just about everything i can think of even a unified toolkit but nothing will work as i cant access recovery or odin or kies???
I have also gone threw the forums and was not able to find anything pertaining to this directly
please help
TL,DR:my s4 mini got a random android update and when it finished updating the evie launcher and touchwis stopped working then android stopped working, got frozen and then shut down after, some time i got it to enter odin mode put the stock rom and got into boot loop with samsung logo, i turn it off after some time, now it wont boot into anything, if a put a sd card with debrick img this apear and only this, if reboot and that msg show again
Boot recovery mode
check boot partitions
copy from t-flash
boot recovery
write 1390008 sections
reboot
_________________________________
Long explanation:
My movistar brand samsung S4 mini (the phone contract ended so i change service provider so they did gave me a code and the phone was free from the contract and now it can accept any service provider) gt-i9190 2 year ago died after a chash in the system, i did have the evie launcher and a different keyboard (not using touchwis) the evie launcher stopped working then touchwis stopped working the phone home menu got to the simple layout then the phone freased and after a couple of second it shut down all this in less than 1 min t and never turn on again, i have a new phone but i will like to use the s4 mini for a proyect but its not starting,
i put an SDXC UHS-I class 10 A1 with a debrick.img(i did try 2 .img from this forum and the phone enter boot recovery mode and show this
__________________________
Boot recovery mode
check boot partitions
copy from t-flash
boot recovery
write 1390008 sections
reboot
________________________
then reboot and the same msg this for more than 30 mins then it stopped until i reconnect it to the pc or the charger or try to turn it on using the power botton, when the phone stop rebooting the normal convinations of keys make it vibrate for 3-4 times but nothing shows in the screen, the bottom convination make it vibrate just after the reboot part and the boot recovery mode dont show again until i stop pressing the bottom comvination then it start the boot recovery loop again, the boot dont fail or at least it do not say it, it just stop trying to rebootafter a long time, its like if its waiting for something to be done by me, like using the botton combination to enter download mode but well idk what to do plz help
Time line of what happened so far
2018
phone died after random update of android OS , though it was his time as i own it for + 5 years
2019
got a new phone and got curious about what happened so i started looking the internet , ended in this website almost everytime.
i left the phone chargin while i searched for answers, i connected the phone to my pc, try the botton combination to get to download mode and recovery(not succesfull) , removed the battery, try to turn it on without baterry to drain all power of phone and restart volatile memory (multiple times) and put it again without gettin anywhere try to connected to a netbook that was freshly formated and with fresh windows 10 intall, odin in that pc recognise the phone just as Qloader-9008 com (x) continued searching and from nowhere the phone started vibrating and then stoped and the chargin icon apeared on the screen i left it to charge as that was the first time i was 100% sure it was chargin after 10+ hours chargin while i was sleeping i try the botton to enter download mode and it worked, try the stock rom from my model, country and service provider and the phone got stuck on a boot loop showing the movistar intro then the s4 mini intro and vibratin each time it was to late so i stupidly turn it of, next morning i got back to try make it work but now it was totally unresponsive odin didn recognize the phone, didnt enter download mode or recovery , no boot loop, nothing is only make a sound in my pc when i try the botton combinations but nothing more just a sound of something connecting and disconnectingx2 got frustrated and left it there collecting dust, also the usb jig dont work
2020
4 months ago i got back to try to make the s4 mini work so i searched the internet again and found the sd card way i did try it and now im here with the phone in a loop of rebootin an starting the same boot recovery mode, it do not say "Flash write failure Ddi : mmc_read dailed" as i did read on other threads in this forum so as i stated before
i put an SDXC UHS-I class 10 A1 with a debrick.img and the phone enter boot recovery mode and show this
__________________________
Boot recovery mode
check boot partitions
copy from t-flash
boot recovery
write 1390008 sections
reboot
________________________
then reboot on a loop and the same msg this for more than 15 mins then it stopped until i reconnect it to the pc or the charger or try to turn it on using the power botton, when the phone stop rebooting the normal convinations of keys make it vibrate for 3-4 times but nothing shows in the screen, the boot dont fail or at least it do not say it, it just stop trying to reboot,
what can i do to at least get it to a point that kies or smart switch can take the controll or be able to use odin, the battery is at 3.78volts
If you can get your S4mini into Download mode, you should try Odin again. But this time, under the Options tab, UNcheck the box for Auto Reboot as well as the box for F. Reset Time. And then when Odin gives the green success indication, immediately disconnect USB and remove battery. Re-insert the battery after a minute or so. Another suggestion; flash the Movistar firmware only if you intend to use their carrier service. Otherwise, it would be better to use firmware not specific to any one carrier. Be sure the 3rd letter of the baseband code is "U" (for "unspecified" carrier). Good luck, hopefully your troubles are not due to faulty hardware.
HY to me happend tha Same my S4-Mini has showing Error in instand and after a tryed to Reboot the Phone was Complete DEAD , tryed the to Boot From SD- Card BOOT RECOVERY MODE it Says FLASH WRITE FAILURE ddi MMC read Failed ! Via odin same happens cant Write Read and NO PIT Partiion FOUND a Tryed also WiTH PIT FAIL .. IT LOOK MY S4- Mini Is Complete DEAD at least the emmc Chip
Happened to me aswell... When i put my SD card with debrick.img on then it bootloops the exackt same way. Cant find any prog or any help to avoid this. Cant even see the phone in Odin no matter with or without the sd card - Or get it to download mode either... i only see the Qualcomm 9008 port as open in device manager
Titanity said:
Happened to me aswell... When i put my SD card with debrick.img on then it bootloops the exackt same way. Cant find any prog or any help to avoid this. Cant even see the phone in Odin no matter with or without the sd card - Or get it to download mode either... i only see the Qualcomm 9008 port as open in device manager
Click to expand...
Click to collapse
How long your has lasting until it died myn was 8 Jears
DEXXO said:
How long your has lasting until it died myn was 8 Jears
Click to expand...
Click to collapse
I need a solution, not a competition in the fails
Titanity said:
I need a solution, not a competition in the fails
Click to expand...
Click to collapse
It was just a question plz dont Cry , and there is no solution your emmc sandisk memory is death 99% buy new or repair good luck