I keep getting stuck in the screen of DoomKernel when i reset the device. I follow this steps:
1) Install TFT .62
2) Download via market CWM w/wifi
3) Instal DoomKernel v14 (with root permissions)
4) Reboot and CWM
5) Factory reset
6) Install JokaWild v3
7) Install Wifi Modules
8) Reboot
I dont know what im doing wrong i only have doomkernel v14 right now cuz jokawild refuse to be installed. Just keep getting stuck in the Doomkernel screen.
Anyone can help me? thanks
Did you wipe the Dalvik cache as well?
It's under Advanced in CWM if you didn't
Sent from my R800i using xda premium
i already try that but is still with the same error, another solution plz?
LorDarko said:
I keep getting stuck in the screen of DoomKernel when i reset the device. I follow this steps:
1) Install TFT .62
2) Download via market CWM w/wifi
3) Instal DoomKernel v14 (with root permissions)
4) Reboot and CWM
5) Factory reset
6) Install JokaWild v3
7) Install Wifi Modules
8) Reboot
I dont know what im doing wrong i only have doomkernel v14 right now cuz jokawild refuse to be installed. Just keep getting stuck in the Doomkernel screen.
Anyone can help me? thanks
Click to expand...
Click to collapse
k your second step doesnt make any sense to me.
1. flash 62 ftf. let the phone boot completely
2. flash doom v14 and let phone boot completely(doom already has cwm so dont understand why you download from market)
3. now boot into cwm wipe data, wipe cache partition, and wipe dalvik cache.
4. then flash jokawildv3.zip or watever its called
5. DONT FLASH NOTHING ELSE FOR NOW. just let the phone boot completely.
6. then after you see everything is fine then you flash your modules and any other desired add-ons.
It takes a while to bootup on some roms; the first time. Also try re-downloading the rom/formatting your sd card - may be a file reading error... IF what soloman suggested doesn't work.
Related
Cyanogen mod is a great one. I installed on 24/5 and it took me 1 day to install that. Because i made a mistake installing 1.7 2nd init .
I don't want any others to get into trouble by a small mistake.
STEPS:
1.Install RSD lite.
IT IS GOOD TO FACTORY RESET AND WIPE CACHE ON STOCK RECOVERY BEFORE YOUR FLASH.
2.Download an froyo sbf .I recommend this ( http://depositfiles.com/en/files/tjnmh6d98 ) 3.4.3-11 "The latest 2.2.1".
3.Flash it on keeping your phone in boot loader mode by pressing volume up +power .
5.Dont unplug your phone until you get a good result (PASS).
4.Now skip or configure motoblur and keep your phone ready.
5.Now download gingerbreak.apk and Root your phone (www.mediafire.com/?it8h9z1dbta50i0 ) v 1.20 is the latest
6.Download cyanogen mod (http://forum.xda-developers.com/show....php?t=1033654 )
7.Download Google apps (http://goo-inside.me/gapps/ )
8.Copy both the zip files on to your sd card
NOW U HAVE ROOTED UR PHONE AND YOU ARE NEARLY READY TO INSTALL CM7!!
"DONT DOWNLOAD AND USE 2ND INIT V 1.7 BECAUSE CM7 WONT WORK ON IT"
9.Download 2nd init v 1.4.2 ( http://forum.xda-developers.com/showthread.php?t=1032212 )
10.Install recovery on your phone and reboot twice fully till your home screen
11.When you reboot you will be automatically taken into recovery.
IF RECOVERY DOESNT COME THEN PRESS VOLUME DOWN BUTTON WHEN BLUE LIGHT COMES DURING BOOTUP
IF U ARE CAUGHT IN A BOOT LOOP THEN GO INTO STOCK RECOVERY AND WIPE YOUR DATA AND CACHE
EVEN IF U ARE IN BOOTLOOP U CAN ACCESS RECOVERY AND BOOT INTO BLUR
12.Go into recovery --> custom recovery and format data and cache and wipe cache
13.Install zip ---->Choose zip from sd card-----> cyanogen mod7 zip file
DONT WIPE OR FORMAT DATA OR CACHE AFTER INSTALLING CM7
14.Install google apps (gapps) zip by the same method and reboot your phone
15.Go to boot ---->2nd init
NOW YOU WILL GET CM7 LOGO.........WAIT FOR A FEW MINUTES UR SCREEN WILL DIM ...........
NOW U WILL BE TAKEN TO YOUR HOME SCREEN OF CM7!!!!!!
IF UR GETTING CM7 LOGO THEN U R !! PASS !!
use only 1.4 guys
i tried this it didn't work for me..i cant start it in 2init it say not in directory...and wen i boot normal it stuck on moto logo
Step 1. RSD Lite 4.9 only worked for me
Step 6. have broken link http://forum.xda-developers.com/showthread.php?t=1033654
lordlos said:
i tried this it didn't work for me..i cant start it in 2init it say not in directory...and wen i boot normal it stuck on moto logo
Click to expand...
Click to collapse
I think you have wiped your cache and formatted your data and cache after installing cm7 rite??...........me too had this once..........u have to format and wipe only one time that is before installing cm7.
Start again
Anyone had toouble installing .........I think lordlos installed it.....
CM7
any official cm7 ????
Is everything working already here. I mean do you still need to download other fixes? can you still revert to froyo? Thanks
Sent from my MB525 using XDA App
No fixes are needed.................just follow my steps
You can revert to froyo
im on cm7 now. thanks
pjgowtham said:
13.Install zip ---->Choose zip from sd card-----> cyanogen mod7 zip file
DONT WIPE OR FORMAT DATA OR CACHE AFTER INSTALLING CM7
14.Install google apps (gapps) zip by the same method and reboot your phone
Click to expand...
Click to collapse
It's been awhile since I installed CM7 beta6. I followed this guide:
http://forum.xda-developers.com/showthread.php?t=1054447
It says:
10. go into custom recovery and wipe data/cache
11. go back to main custom recovery menu and select "install zip from sdcard" then go to "choose zip from sdcard"
12. select the cyanogenmod 7 zip
13. go back to recovery menu and repeat step 10, then select the Gapps zip and install (google apps)
It sounded not logical to me to wipe again after the update but can't remember if I really did that 2nd wipe back then. It's contradictive to this guide. Can someone please explain?
Very good! Congratulations
ok i flashed a swype using the swype from another thread and i get 2 errors: ndroid.process.media and com.android.phone
and have to FC.
so i re install cm7 from step 1. and restored using titanium back up. and still, the same error occured. any ideas?
I guess you restored some system apps and/or settings. That will typically result in this kind of fc's
Sent from my MB525 using XDA App
any way to undo it without doing the steps all over again. data/cache wipe or factory resets takes me to bootloop
Hey , now i'm using MIUI galnet version but i wanna give CM7 a chance , so before start changing to CM7 i have to do a factory reset ?
anyone have problems with connecting to 3g or data. im in tmob us. baseband tmo us 34.4.9
SWYPE
Dont install other swypes..............try installing swype beta.........SUPERB!!!!
beta.swype.com
STEWI11
I have corrected some steps on stewi's guide and posted it here........My first thanks to stewi11 and this are my own tested and perfect steps.....
U LL GET NO PROBLEMS
Hey guyz!
Well, Here's my story
I unlocked the bootloader of my Arc..... Flashed the 0.42 rooted .ftf file and well I had my arc.
I took backup of all my stuff and thought of installing CM7.
So well, I downloaded the latest CM7 Mod from the website stable one and fastboot'd (or whatever the language is) the boot.img into my arc.
And den I booted my phone into recovery mode, wiped my cache, system and data and flashed the update_cm7.1.zip file into it.
Not my phone after booting up dosent work. It shows the lock screen and within a second boots again :'(
I searched and found that I did not install the CWM Recovery and guessed that it was crucial for it.
Now I have a dead phone.
Can you Pleaaaaaaaase Help Me out!
My mobile is my life and my parents will kill me
Thanks Alot!
Install doom kernel via fastboot
Enviado desde mi LT18i usando Tapatalk
Done Doom Kerenal
Still going into Infinite BootLoop!!
you usually wipe everything(user data, cache, dalvik cache) after flashing the ROM
or try repeating the whole process
- flash .42 ftf file using flashtool 0.6.7 then disconnect device
- fastboot flash boot boot.img(from the CM7 package) then disconnect device
- power-on and go to recovery then flash the CM7 ROM then GAPPS
- wipe user data, cache and dalvik cache
- reboot
I suggest you also try FXP105 package here in XDA, I think it's more updated than the one from official CM7 site
terranox said:
Install doom kernel via fastboot
Enviado desde mi LT18i usando Tapatalk
Click to expand...
Click to collapse
What are you talking about?
DooMKernel is for stock based ROMs, not for CM.
I'd recommend to you to check out FXP's CM7, it's way better and stable, imo.
Rycon33 said:
you usually wipe everything(user data, cache, dalvik cache) after flashing the ROM
or try repeating the whole process
- flash .42 ftf file using flashtool 0.6.7 then disconnect device
- fastboot flash boot boot.img(from the CM7 package) then disconnect device
- power-on and go to recovery then flash the CM7 ROM then GAPPS
- wipe user data, cache and dalvik cache
- reboot
I suggest you also try FXP105 package here in XDA, I think it's more updated than the one from official CM7 site
Click to expand...
Click to collapse
Ill Try!
Thanks Alot!
Whats GAPPS?
And Dalvik cache? How can I clear it
SS4Serebii said:
Ill Try
Whats GAPPS?
And Dalvik cache?
Click to expand...
Click to collapse
Go here.
And dalvik cache is under advanced options in CWM.
Ok, Followed your steps but going into infinite boot loop :'(
Will try for CM7.2.0 - FXP10
SS4Serebii said:
Ok, Followed your steps but going into infinite boot loop :'(
Will try for CM7.2.0 - FXP10
Click to expand...
Click to collapse
Do that and follow these steps:
dp94 said:
Connect your device with your current ROM to a PC.
Put the ROM (*.zip file) on your sdcard.
Shutdown device.
Connect your device with fastboot mode (pressing menu button) to a PC.
Go to your fastboot folder.
Press shift key, right click and select "Open command window here".
Install kernel by using the command "fastboot flash boot boot.img".
After installing disconnect your device from PC.
Enter CWM recovery by pressing volume down button several times while booting.
Do a full wipe/factory reset, wipe cache, wipe dalvik cache.
Select install zip from sdcard.
Navigate to the folder you've saved the ROM and select it.
After installing select reboot system now.
Click to expand...
Click to collapse
Now I got the same problem as Serebii. I've done all you've said, but I just get a black screen flashing the kernel. The fxp-Logo doesn't appear and I can't get into recovery mode.
Have you guys flashed .42 firmware before?
Or are you using a different?
You'd have to flash .42 firmware (look into CM7 thread) and then do the above steps again.
guys, when flashing kernel, look closely on your fasboot command window if there's something like "1 bad blocks encountered" message
should be "0 bad blocks encountered" for the kernel to work fine from what I know
Did That
Still Nothing...
Although Unlike macmeir, I'm able to go into recovery adn first see SE, and den CM7 boot logo
And also 1 second of the CM7 Welcome screen.
Thats It
Yea, It isnt showing any bad blocks
Now I got my phone back to life. I flashed the .42 firmware with flashtool. But then I had to install the fxp103-stuff. I cleared all caches, etc. It's strange; I did it before but it didn't work. I don't know if I've done something different.
But I'm still not able to run fxp104 or 105. I won't try again soon, because I spend five hours to get my device working.
Thanx for your help and good luck to you, Serebii.
good for you.
btw, you can also try Doomkernel on stock ROM, it's a great combo, I always go back to that setup
OK,
I flashed the latest CM7.2 And My Phone's alive Again!
A Biiiiiiiiig Thanks to Everybody!!
i was rooting my arc s and it was successfully rooted after that i wanted to install some custom rom on it, i tryed the Modded ICS one and installed there boot.img and now my phone just reboots after it shows the "XPERIA" logo
Please help im new at flashing )
Thanks
hi
So u have flashed boot but not rom?
U need to have the rom on your SD .
Turn off phone boot it up and when boot logo appears repeatly press back button (not sure if there's an indicater on that kernel or not)
This should boot cwm when in cwm make a backup
Select backup and restore then backup
When this completes wipe data ,clear cache and advanced clear dalvik cache
now select install zip from SD ,then choose zip from SD,then locate your rom file select it and hit yes when it finishes ,reboot and enjoy
Volume rocker moves up and down
And home or power button selects
If u can't get into cwm u have made a mistake flashing boot so reflash it before the above
Failing this return to stock by flash original fw thru flash tool
Plenty of tuts on that just search
Hope that helps
Sent from my LT15i using xda premium
CobraPro said:
i was rooting my arc s and it was successfully rooted after that i wanted to install some custom rom on it, i tryed the Modded ICS one and installed there boot.img and now my phone just reboots after it shows the "XPERIA" logo
Please help im new at flashing )
Thanks
Click to expand...
Click to collapse
+1.
if i flash doomlord´s kernel,it works,but every time that turn off the device, it loses all configuration settings.
Pynzeta said:
+1.
if i flash doomlord´s kernel,it works,but every time that turn off the device, it loses all configuration settings.
Click to expand...
Click to collapse
try all again. that was kinda wierd :S
using v20 ? if yes, try v19
Try re flash
Pynzeta said:
+1.
if i flash doomlord´s kernel,it works,but every time that turn off the device, it loses all configuration settings.
Click to expand...
Click to collapse
try re-flashing the kernel and then re flashing the rom...
do a full wipe before u install the ROM..
alwaysgetriku said:
try re-flashing the kernel and then re flashing the rom...
do a full wipe before u install the ROM..
Click to expand...
Click to collapse
is not the solution,i try several times,and always the same results.
Try:
1) copy your rom into sdcard.
2) flash your kernel under fastboot mode, then reboot.
3) keep press volumn button while rebooting, it should b under cwm screen.
4) wipe dalvik cache under advance
5) wipe data partition
6) factory reset, then reboot again
7) go into cwm screen again, then choose install zip frm sdcard, choose n run the rom that u copy into sdcard earlier. Reboot again after completed.
8) u shall wait for a while when restarting... Then should b ok....
U may try this, dunno whether work for u not.
Sent from my LT18i using XDA
Reminder:
For mooded ics rom, U must use ics stock kernel or doomlord ics advanced stock kernel, its run quite well for me...
Sent from my LT18i using XDA
I flashed my arc s last night with ICS Kernel with CWM Recovery and JJ's rom, had the same problem but as the above poster mentioned, wipe everything sorted out the problem.
Note: Just factory reset not enough you have to wipe everything
hi all,
first hello im new here,
sorry to post here but im not allowed to post in the correct lupus thread.
i have arc s, LT18i, i have unlocked it and installed ultimate hd 4, with (recommended) latest lupus v16 kernal.
it went fine no probs but i now have no wifi, ive read the thread and there was issues with wifi not working but the latest version 16 states no need for wifi zip as built in??
can anyone confirm this or suggest a kernal that workes well with uhd4
thanks
barkx
Flash the kernel, then do a full wipe and install the ROM. I am on UHD 4.0 as well and everything works fine. As for recommended kernel, Jader recommends LuPuS kernel.
僕のLT18iから送られてきた
barkx said:
hi all,
first hello im new here,
sorry to post here but im not allowed to post in the correct lupus thread.
i have arc s, LT18i, i have unlocked it and installed ultimate hd 4, with (recommended) latest lupus v16 kernal.
it went fine no probs but i now have no wifi, ive read the thread and there was issues with wifi not working but the latest version 16 states no need for wifi zip as built in??
can anyone confirm this or suggest a kernal that workes well with uhd4
thanks
barkx
Click to expand...
Click to collapse
Flash Kernel for stock ICS (LuPuS v16)
Place ROM on SD-Card
Back up user apps and data
Power off phone
Boot to CWM (Keep pressing the Volume Down key after the Sony logo appears or key designated for your phone)
Wipe Data/Factory Reset
Mounts and Storage --> Format /System
Advanced > Wipe Battery Stats
Install zip from SD card > Choose Xperia Ultimate HD
Follow on screen instructions on AROMA.
After Complete Installation untick "reboot" and select reboot in CWM
And you should be up and booming now !!
almiteyG said:
Flash Kernel for stock ICS (LuPuS v16)
Place ROM on SD-Card
Back up user apps and data
Power off phone
Boot to CWM (Keep pressing the Volume Down key after the Sony logo appears or key designated for your phone)
Wipe Data/Factory Reset
Mounts and Storage --> Format /System
Advanced > Wipe Battery Stats
Install zip from SD card > Choose Xperia Ultimate HD
Follow on screen instructions on AROMA.
After Complete Installation untick "reboot" and select reboot in CWM
And you should be up and booming now !!
Click to expand...
Click to collapse
thanks for replies both but that procedure is exactly what i did?
i just reflashed the kernal and re-installed the rom, exactly the same.
i then powered off the phone and powered up again and wifi is fine
hehe turn it off and on again lol
cheers
barkx
almiteyG said:
Flash Kernel for stock ICS (LuPuS v16)
Place ROM on SD-Card
Back up user apps and data
Power off phone
Boot to CWM (Keep pressing the Volume Down key after the Sony logo appears or key designated for your phone)
Wipe Data/Factory Reset
Mounts and Storage --> Format /System
Advanced > Wipe Battery Stats
Install zip from SD card > Choose Xperia Ultimate HD
Follow on screen instructions on AROMA.
After Complete Installation untick "reboot" and select reboot in CWM
And you should be up and booming now !!
Click to expand...
Click to collapse
popthosegaskets said:
Flash the kernel, then do a full wipe and install the ROM. I am on UHD 4.0 as well and everything works fine. As for recommended kernel, Jader recommends LuPuS kernel.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
Don't make it even more complicated, guys. To fix the WiFi issue, you do not have to reinstall the ROM or kernel.
Lupus kernel(s) have built-in menu. Install Terminal Emulator or use 'adb shell', type command 'lupus' and use the wifi option (can not remember, how it was exactly given in the menu).
since im new to xda i can not post on the main thread http://forum.xda-developers.com/showthread.php?t=2442977&page=12
so i had to create this one as a question, cause i have a problem installing this rom, i downloaded both the kernel and the rom from the main thread, i first flashed to stock rom with odin, then i followed every step to install the kernel and after the rom, but im stuck in boot loop and im kinda angry cause it seems like im the only one with that problem.
i tried to install the rom using white's 1.33 kernel instead of percy's kernel ( the one provided in the main thread) and then flashing the rom, and it kinda worked, because i didnt go in to boot loop, but neither wifi or bluetooth werent working.
pls help me!!! i really want to try this rom!
1.first flash stock ddlk2
2.download the rom and flash it after :
(i) formatting system,data and cache
(ii) mounting all partitions
When done flashing,wipe data and reboot
davithdeathrider said:
since im new to xda i can not post on the main thread http://forum.xda-developers.com/showthread.php?t=2442977&page=12
so i had to create this one as a question, cause i have a problem installing this rom, i downloaded both the kernel and the rom from the main thread, i first flashed to stock rom with odin, then i followed every step to install the kernel and after the rom, but im stuck in boot loop and im kinda angry cause it seems like im the only one with that problem.
i tried to install the rom using white's 1.33 kernel instead of percy's kernel ( the one provided in the main thread) and then flashing the rom, and it kinda worked, because i didnt go in to boot loop, but neither wifi or bluetooth werent working.
pls help me!!! i really want to try this rom!
Click to expand...
Click to collapse
Try this method
#1-Flash stock rom using odin
#2-Go to cwm
#3-Mount all partitions
#4-Install CyanogenMod#2 kernel
#5-Back and go to Advance then REBOOT RECOVERY
#6-You are on cwm now and the fonts are small
#7-Go to mounts and Format system,data,cache
#8-Dont press back -Mount all partitions
#9-Install zip from sd card-choose zip then choose The Rom
#10-When it is done flashing -Wipe Data - tHEN REBOOT
Do this.
1. Go to cwm recovery
2. Clear data and wipe cache
3. Go to advance :- wipe dalvik cache and battery states.
4. Go to mount & storage :- format system, data & cache.. dont format sd.
5. Then mount everything expect sd-ext.
6. Flash kernel.
7. Go to advance reboot recovery.
8. Again wipe data & cache.
9. go to advance and again wipe dalvik cache & battery states.
10. Mount everything expect sd-ext
This time you dont need to format system, data, or cache in mount.
11. Finally flash rom and reboot.
Hope it work.
Using optimus nexus me v5 on galaxy y