[Q] optimus nexus me v5 [cm7 port] boot loop problem. - Galaxy Y GT-S5360 General

since im new to xda i can not post on the main thread http://forum.xda-developers.com/showthread.php?t=2442977&page=12
so i had to create this one as a question, cause i have a problem installing this rom, i downloaded both the kernel and the rom from the main thread, i first flashed to stock rom with odin, then i followed every step to install the kernel and after the rom, but im stuck in boot loop and im kinda angry cause it seems like im the only one with that problem.
i tried to install the rom using white's 1.33 kernel instead of percy's kernel ( the one provided in the main thread) and then flashing the rom, and it kinda worked, because i didnt go in to boot loop, but neither wifi or bluetooth werent working.
pls help me!!! i really want to try this rom!

1.first flash stock ddlk2
2.download the rom and flash it after :
(i) formatting system,data and cache
(ii) mounting all partitions
When done flashing,wipe data and reboot

davithdeathrider said:
since im new to xda i can not post on the main thread http://forum.xda-developers.com/showthread.php?t=2442977&page=12
so i had to create this one as a question, cause i have a problem installing this rom, i downloaded both the kernel and the rom from the main thread, i first flashed to stock rom with odin, then i followed every step to install the kernel and after the rom, but im stuck in boot loop and im kinda angry cause it seems like im the only one with that problem.
i tried to install the rom using white's 1.33 kernel instead of percy's kernel ( the one provided in the main thread) and then flashing the rom, and it kinda worked, because i didnt go in to boot loop, but neither wifi or bluetooth werent working.
pls help me!!! i really want to try this rom!
Click to expand...
Click to collapse
Try this method
#1-Flash stock rom using odin
#2-Go to cwm
#3-Mount all partitions
#4-Install CyanogenMod#2 kernel
#5-Back and go to Advance then REBOOT RECOVERY
#6-You are on cwm now and the fonts are small
#7-Go to mounts and Format system,data,cache
#8-Dont press back -Mount all partitions
#9-Install zip from sd card-choose zip then choose The Rom
#10-When it is done flashing -Wipe Data - tHEN REBOOT

Do this.
1. Go to cwm recovery
2. Clear data and wipe cache
3. Go to advance :- wipe dalvik cache and battery states.
4. Go to mount & storage :- format system, data & cache.. dont format sd.
5. Then mount everything expect sd-ext.
6. Flash kernel.
7. Go to advance reboot recovery.
8. Again wipe data & cache.
9. go to advance and again wipe dalvik cache & battery states.
10. Mount everything expect sd-ext
This time you dont need to format system, data, or cache in mount.
11. Finally flash rom and reboot.
Hope it work.
Using optimus nexus me v5 on galaxy y

Related

Can somebody please help me!!!!

i flashed to cyanogenmod 7 nightlies, and then i installed from the sd the google apps (because the rom didn't come with market) through clockwork mod recovery and when i restart the phone, there is a blackscreen after the htc!!! It doesnt load up the cyanogen mod!! I've been waiting for over an hour!!!
I don't know what to do to fix it!!!
Can somebody please help me. I appreciate it very very much!!!
hey bro... dont flash two zips in one go... just flash cm7.2 again.. then reboot into recovery and then format dalvic cache, format factory and etc.. and then rebot again into recovery and then flash gapps
striker280 said:
i flashed to cyanogenmod 7 nightlies, and then i installed from the sd the google apps (because the rom didn't come with market) through clockwork mod recovery and when i restart the phone, there is a blackscreen after the htc!!! It doesnt load up the cyanogen mod!! I've been waiting for over an hour!!!
I don't know what to do to fix it!!!
Can somebody please help me. I appreciate it very very much!!!
Click to expand...
Click to collapse
as mhrsolanki2020 said ... When flashing rom, always boot it, and after reboot flash any changes that you want, like data/link2sd,gapps,gps fixes and so on ...
never flash few things in one step.
also clean cache and dalvik every time you flash new rom ..
I don't think he wiped data or cache.
You can flash cm7 and gapps at the same time with no issues.
I prefer doing it like this rather than multiple restarts and then I setup my accounts on first boot its never given me any problems.
Try again make sure in clockwork mod recovery you:
wipe data/factory reset
Wipe cache partition
Then goto advance and wipe dalvik
Then flash cm7
Then flash gapps
Restart and all should be fine.
Good luck.
so are those the steps i need?
and can u give me a link of the gapps i am supposed to use please?
striker280 said:
and can u give me a link of the gapps i am supposed to use please?
Click to expand...
Click to collapse
here you go mate ht tp://cmw.22aaf3.com/gapps/gapps-gb-20110828-signed.zip
can you give me the steps i need to fix the black screen please?
Boot into recovery clockwork mod and do what I said above and you'll be fine.
so once i flash cyanogen i do not reboot first, but i directly flash the gapps as well?
Yes that's how I been doin it for many months
Make sure to wipe the data that I said in previous post or it wont boot.
Its an important step when flashing a rom.
Like the problems that previously occurred.
sorry for so many questions but,
is it either wipe data or factory reset or both?
"wipe data/factory reset
Wipe cache partition
Then goto advance and wipe dalvik
Then flash cm7
Then flash gapps"
'Data/factory reset' is the same thing
Then 'wipe cache partition'
Then in advance right at the bottom of clockwork mod 'wipe dalvik'
Once done click back then chose install zip from SD
Choose your rom file then confirm.
Then when finished click back.
Then install zip from SD select gapps file and confirm.
Once finished click reboot system.
Done.
will this work for sure? or will it give me the black screen again?
If you do everything I said in the same order it should definitely work my friend.
Is your mobile a GSM or cdma? Does it use a sim card?
Thank you so very much!!!!
No problem.
I'm guessing your up and running And hopefully very happy.
Good luck and all the best.
You're a life saver!!!

[Q] My Gnex won't get past 4.0.2 Canada

Hi I've tried to change my Build. I'm currently using Android Revolution HD. I've got the kernel the program came with - android-build. I have tried changing it over to a whole of builds. AOKP, Gummy
It never successfully launches any of them.
Every time I wipe data, cache and I wipe Dalvik too.
I don't know what to do...
Is there any one who is on Rogers that can do this?
Thanks guys
Biomera said:
Hi I've tried to change my Build. I'm currently using Android Revolution HD. I've got the kernel the program came with - android-build. I have tried changing it over to a whole of builds. AOKP, Gummy
It never successfully launches any of them.
Every time I wipe data, cache and I wipe Dalvik too.
I don't know what to do...
Is there any one who is on Rogers that can do this?
Thanks guys
Click to expand...
Click to collapse
Don't really make sense??? Try to also format system in recovery ( it won't touch ur personal stuff ) then do all the other wipes then try flash another Rom if that don't work I.got nothing, if u can't figure out there's always fastboot stock Google .img
Can you provide a step-by-step instruction on how you tried to update your Galaxy Nexus ? I'm not on Rogers (I'm on TELUS), but still, maybe we can help you and see if you are following the right path !
You're not doing something right if you can't get another ROM installed.
Do this.
Make sure ROM and Gapps package for that ROM is on your SD card
Reboot into recovery
Wipe data
Wipe cache
Go to Advanced, Wipe dalvik
Go to Mounts and Storage, format system, and cache
INSTALL ROM based on 4.03
Install Gapps
Reboot and Enjoy
Samsuck said:
You're not doing something right if you can't get another ROM installed.
Do this.
Make sure ROM and Gapps package for that ROM is on your SD card
Reboot into recovery
Wipe data
Wipe cache
Go to Advanced, Wipe dalvik
Go to Mounts and Storage, format system, and cache
INSTALL ROM based on 4.03
Install Gapps
Reboot and Enjoy
Click to expand...
Click to collapse
I would back your phone up before doing this. Formatting your system deletes the operating system.
theherodrownd said:
I would back your phone up before doing this. Formatting your system deletes the operating system.
Click to expand...
Click to collapse
Correct. Listen to him and PLEASE make a back-up. I forgot to mention that.

Failed FLASHING S4

Hi guys, don't know if this is going on the right forum or whatever but I have a problem!
So last week I rooted and flashed my phone to 4.4.2 Google Play Edition (I'm a noob to all of this) may I add that I have a GT-i9505 model with an unlocked bootloader etc (as I have an international s4)
Phone was working fine except for a few bugs such as camera application would stop working.
So I decided to have to have a look around at another ROM to change and flash it and I found the 4.4.2 Liquidsmooth ROM (which looks pretty good and seems to be everything I need) so I started to reflash it all again (as I did before) however I have 35% battery and my flash failed with the error
'file_getprop: failed to stat "/system/build.pro" error executing updater binary in zip.
So what is it I'm doing wrong? Is it coz I'm flashing on top of another ROM? I have no idea, can someone point me in the right direction? I'm not using an ext SD card for this either!
If you can a noob version would be awesome! Thank you so much for reading this!
BilalMH said:
Hi guys, don't know if this is going on the right forum or whatever but I have a problem!
So last week I rooted and flashed my phone to 4.4.2 Google Play Edition (I'm a noob to all of this) may I add that I have a GT-i9505 model with an unlocked bootloader etc (as I have an international s4)
Phone was working fine except for a few bugs such as camera application would stop working.
So I decided to have to have a look around at another ROM to change and flash it and I found the 4.4.2 Liquidsmooth ROM (which looks pretty good and seems to be everything I need) so I started to reflash it all again (as I did before) however I have 35% battery and my flash failed with the error
'file_getprop: failed to stat "/system/build.pro" error executing updater binary in zip.
So what is it I'm doing wrong? Is it coz I'm flashing on top of another ROM? I have no idea, can someone point me in the right direction? I'm not using an ext SD card for this either!
If you can a noob version would be awesome! Thank you so much for reading this!
Click to expand...
Click to collapse
Ok you must wipe your old rom first but MAKE A BACK UP, firstly go into recovery (cwm or twrp) and go to "back up" and make a back up. second go to wipe and wipe cache then wipe dalvic cache (if your using cmw you will have to go to advanced on the home screen to wipe dalvic cache)
third go back to wipe and wipe system, after that wipe the cache and dalvic cache just like before
And for the final stage go to install, find the rom you want (will be a zip file) and then flash it, when done wipe cache and dalvic cache one more time then reboot
And bam you should have you new custom rom (you dont have to keep wiping the cache and dalvic cache but its recomended)
bobs158 said:
Ok you must wipe your old rom first but MAKE A BACK UP, firstly go into recovery (cwm or twrp) and go to "back up" and make a back up. second go to wipe and wipe cache then wipe dalvic cache (if your using cmw you will have to go to advanced on the home screen to wipe dalvic cache)
third go back to wipe and wipe system, after that wipe the cache and dalvic cache just like before
And for the final stage go to install, find the rom you want (will be a zip file) and then flash it, when done wipe cache and dalvic cache one more time then reboot
And bam you should have you new custom rom (you dont have to keep wiping the cache and dalvic cache but its recomended)
Click to expand...
Click to collapse
Thank you, this did the trick!
BilalMH said:
Thank you, this did the trick!
Click to expand...
Click to collapse
Glad i could help :laugh:
the most important thing is read, read and read the instruction before applying any flash.
I always do that and never fail

Pac man Huashan 4.4 BOOTLOOP In all Huashan Devices

DEVICE INFORMATION
C5303 SONY XPERIA HUASHAN
||AFTER WIPE SYSTEM,DALVIK,FORMAT SYSTEM,FORMAT DATA AND MEDIA , FORMAT DATA , FORMAT CACHE|| 3 TIMES
after flashing from sdcard The Pacman 4.4 For huashan released on 3/03/2014
bootloop at black screen after flashing Boot.img and the rom , i FLASHED OTHER KERNEL (To see if fix) AND FREEZE ON LOADING SCREEN
Its dont possible to use pacman 4.4 on huashan devices
ALL MY FRIENDS THAT TRIED , HAVE THE SAME PROBLEM
Sorry i cannot provide a logcat now, i dont have time
If u want to see the problem , install pacman 4.4 for You huashan device ...
Pls i need much 4.4.2 pacman ... i alredy use 4.3 for now but i like much the 4.4...
plss anyone have the solution?
Hmmm....i don't know if you follow this step but if you don't then try it...
1. Flash kernel inside the rom....
2. Boot into recovery....
3. Factory reset/full wipe....
4. wipe cache....
5. wipe dalvik cache....
6. in Mounts and Storage, format System, Data and Cache...
7. flash pac rom...
8. flash gapps....
9. boot into system....
if those above step didn't work then skip step 8 (flash rom only) then boot into system....after fully reboot then go back to recovery to flash gapps...
iPusak Gaoq™ said:
Hmmm....i don't know if you follow this step but if you don't then try it...
1. Flash kernel inside the rom....
2. Boot into recovery....
3. Factory reset/full wipe....
4. wipe cache....
5. wipe dalvik cache....
6. in Mounts and Storage, format System, Data and Cache...
7. flash pac rom...
8. flash gapps....
9. boot into system....
if those above step didn't work then skip step 8 (flash rom only) then boot into system....after fully reboot then go back to recovery to flash gapps...
Click to expand...
Click to collapse
how enter in recovery if black screen?
samuk190 said:
how enter in recovery if black screen?
Click to expand...
Click to collapse
take off the battery then put it back, turn on and go into recovery...

[Q] HELP. HTC One X Stuck in bootloop. Almost all famous solutions tried out

So I wanted to go to Lollipop and I happened to flash the twrp recovery for new layout(as i was getting boot loop when flashing the rom with cwm recovery)
The things i tried until now.
1. Installed twrp and formatted it to get the new layout. Wiped everything, system, cache, data, dalvik cache
2. It was supporting MTP so i transferred the roms to the device being in recovery. Installed CM 12 + gapps for lollipop.
3. Rebooted to bootloader again. flashed boot.img, and did fastboot erase cache.
4. Rebooted again and stuck at CM boot logo.
I wiped the cache, dalvik cache(actually did a factory reset in the twrp recovery) and tried installing Resurrection Remix. Again flashed the relevant boot.img too. But the same result..
Did i destroy my phone?
anoopknayak said:
So I wanted to go to Lollipop and I happened to flash the twrp recovery for new layout(as i was getting boot loop when flashing the rom with cwm recovery)
The things i tried until now.
1. Installed twrp and formatted it to get the new layout. Wiped everything, system, cache, data, dalvik cache
2. It was supporting MTP so i transferred the roms to the device being in recovery. Installed CM 12 + gapps for lollipop.
3. Rebooted to bootloader again. flashed boot.img, and did fastboot erase cache.
4. Rebooted again and stuck at CM boot logo.
I wiped the cache, dalvik cache(actually did a factory reset in the twrp recovery) and tried installing Resurrection Remix. Again flashed the relevant boot.img too. But the same result..
Did i destroy my phone?
Click to expand...
Click to collapse
can you enter in recovery ?
wipe dalik,chace,chace,data then go to,mount select system,chace,data,2gb extra data ,and disabel mtp
if your phone dot show up just leave it on select partions to mount ,unplug cable then plug it back,go to device manager btw and see will it show there
dado323 said:
can you enter in recovery ?
wipe dalik,chace,chace,data then go to,mount select system,chace,data,2gb extra data ,and disabel mtp
if your phone dot show up just leave it on select partions to mount ,unplug cable then plug it back,go to device manager btw and see will it show there
Click to expand...
Click to collapse
Yes I can enter recovery. But again I just cant get any lollipop ROM's working. I dont know whether i have to restore to kitkat(i really dont want too..
I dont get it.. Wipe dalvik cache, cache, data and then disable mtp and then enable mtp.. I mean at the end what does this do?
And in the meanwhile did you mean HTC Sync Manager for device manager. FYI I use a mac(if this helps to get into the problem). And i had flashed kitkat roms from the same without a hiccup but lollipop is failing
anoopknayak said:
Yes I can enter recovery. But again I just cant get any lollipop ROM's working. I dont know whether i have to restore to kitkat(i really dont want too..
I dont get it.. Wipe dalvik cache, cache, data and then disable mtp and then enable mtp.. I mean at the end what does this do?
And in the meanwhile did you mean HTC Sync Manager for device manager. FYI I use a mac(if this helps to get into the problem). And i had flashed kitkat roms from the same without a hiccup but lollipop is failing
Click to expand...
Click to collapse
its hard to explain with recovery you can mount ur sdcard and put another room and install ,the easy way its to start from the begin and install clear CM12 and you will get out from bootloop that help me i was in bootloop like 3920489208420984920 times hahaha
anoopknayak
Have you solve the bootloop issue? I am having the same problem on my International One X
thanks
Probably both of you encountered the same problem as me.
If you are S-on, you have to flash rom and kernel separately. Also, if you try to revert any changes with twrp you have to flash kernel you were using during creation of backup, and then restore backup.
In other words: your current kernel is incompatible with rom.
Mwys
Yes i am S-ON. Can you tell me what the steps are to flash the kernel? I do not have a backup.
What is did was flash New Layout TWRP, did a complete wipe, then copied the ROM and G-Apps zips to the phone, installed them and then flashed boot.img.
Thanks for the help
Yup I also tried the same. but no luck. I tried to revert back to kitkat(by installing cwm, format the storage, sideloaded the ROM and gapps, flashed the boot.img) and still again in bootloop.
Sorry for the delay. I was a lot too busy with work.

Categories

Resources