Develop Bugs

[Q] N00b updating Custom ROM

I have installed MildWild CM-2.7 on my Desire but there is now MildWild CM-2.8 and I can't find a guide how to install/update my Desire.
I have got S-OFF and recovery by Revolutionary The guide I followed to S-OFF and ROOT
This is the ROM I using. MildWild CM ROM

Just flash it via recovery like you did with the previous version

Will flashing the new version cause me to loose everything on my current version I.e apps and data etc??
Thanks for the reply though

do back up first, wipe davik+cache and flash it... it should work if not do full wipe and restore back up
just post any result we will move from there

What should I use to hackup TIbackup? Or is there a better one that you reccomend?
Wh000sher

Titanium and recovery. All basic stuff. Have a,read of my rooting faq in my signature. Tells you everything you need to know
Sent from my HTC Desire using Tapatalk

rootSU said:
Titanium and recovery. All basic stuff. Have a,read of my rooting faq in my signature. Tells you everything you need to know
Sent from my HTC Desire using Tapatalk
Click to expand...
Click to collapse
Do I only restore the Titanium I am guessing, as restoring recovery would revert back to my current ROM? and I have thanks

Yes indeed. With titanium, only restore "missing apps with data".
Theres a guide Angusc wrote here:
http://forum.xda-developers.com/showthread.php?t=1480343

ROM Manager can make updating so much easier - well worth the investment.

JohnHarrisNZ said:
ROM Manager can make updating so much easier - well worth the investment.
Click to expand...
Click to collapse
I can't speak for other devices but for Desire, nope it's not worth the time and money.

kotag82 said:
do back up first, wipe davik+cache and flash it.
Click to expand...
Click to collapse
So I'm only wiping the davik cahce correct?
Not anything else or have I missed something?

Wh000sher said:
So I'm only wiping the davik cahce correct?
Not anything else or have I missed something?
Click to expand...
Click to collapse
Things I've learned with all this flashing that may be helpful for you.
1. Before flashing, always backup your current system up. nandbackup via recovery, titanium for your apps, sd card if really needed for that you need to do.
2. If flashing an updated version of same rom, wipe cache and dalvik only on your recovery (unless explicitly specified by dev to make a full wipe.)
3. If you are having weird issues after upgrading the same rom, do a full wipe and start fresh. If issue is not resolved, report the issue to the Dev's thread.
4. Do a Full Wipe on recovery (System/factory, cache, dalvik if coming from a different rom).

stankyou said:
Things I've learned with all this flashing that may be helpful for you.
1. Before flashing, always backup your current system up. nandbackup via recovery, titanium for your apps, sd card if really needed for that you need to do.
2. If flashing an updated version of same rom, wipe cache and dalvik only on your recovery (unless explicitly specified by dev to make a full wipe.)
3. If you are having weird issues after upgrading the same rom, do a full wipe and start fresh. If issue is not resolved, report the issue to the Dev's thread.
4. Do a Full Wipe on recovery (System/factory, cache, dalvik if coming from a different rom).
Click to expand...
Click to collapse
Thanks for the reply.
In response to 2. I am using ClockworkMod as my Recovery and I am guessing you mean I have to wipe 'cache partition' and 'wike dalvik cache' under advanced?
I am creating a guide to help fellow N00bs how to update a rom and change between ROM's
Wh000sher

Wh000sher said:
Thanks for the reply.
In response to 2. I am using ClockworkMod as my Recovery and I am guessing you mean I have to wipe 'cache partition' and 'wike dalvik cache' under advanced?
I am creating a guide to help fellow N00bs how to update a rom and change between ROM's
Wh000sher
Click to expand...
Click to collapse
Yes if I remember correctly there are the first three lines on that recovery is wipe system, cache partition (like you stated), and wipe dalvik. So if upgrading just wipe cache partition and dalvik cache.
System partition is where the "Android OS" resides. Wiping it is like formatting your computer. Most of the time, incremental updates of the same rom requires you to wipe just the cache partition and dalvik, otherwise if the rom update has a lot of changes, the dev might require you to wipe all three options on the recovery.

Having wiped my cache and dalvik cache. I am now wanting to install the new version. On the main screen I have 2 options which are tempting to click.
One is 'Apply update from SD card' and the other is 'Install zip from SD card'
I am unsure of which to choose but my gut instinct is to go with 'Install zip from SD card', is this correct or am i going to make a terrible mistake?
wh000sher

Install zip from SD

[Q] updating a ROM - flash what? wipe what?

I want to update my Unofficial CM10 +3.x Kernel to the latest update from Hashcode.
UNOFFICIAL CM10 + 3.x Kernel for Kindle Fire [09/16 CHARGING+]
When you do an update like this, do you wipe everything like I did when I first flashed the ROM? I mean, when I installed, I wiped system, factory reset, cache and dalvik cache. Then I flashed the ROM and then I flashed gapps.
So now I just want to update the OS, what do I need to wipe? And will I need to flash gapps again?
CAn't ask this in the development thread 'cause my n00b hat it still too shiney.
Thanks!

A question like this doesn't belong in the development thread because it isn't development related.
If you're going from one ROM to a different one, you need to wipe System and Factory Reset (data and cache).
If the ROM is simply an update of an existing ROM, generally all you need to wipe is data and cache. There are always exceptions to this so it's always a good idea to make a backup in case things turn sour.
After installation of the ROM you have the option to wipe cache and dalvik. It isn't required but not wiping them has been known to cause some bugginess.

soupmagnet said:
A question like this doesn't belong in the development thread because it isn't development related.
If you're going from one ROM to a different one, you need to wipe System and Factory Reset (data and cache).
If the ROM is simply an update of an existing ROM, generally all you need to wipe is data and cache. There are always exceptions to this so it's always a good idea to make a backup in case things turn sour.
After installation of the ROM you have the option to wipe cache and dalvik. It isn't required but not wiping them has been known to cause some bugginess.
Click to expand...
Click to collapse
Thank you once again, soupmagnet. Yeah this is just an update to my current ROM. So .... I won't need to flash gapps again?
I'm slowly figuring this stuff out. hehehe... When I was 30 I picked this stuff up quick. Turning 60 on Thursday and stuff tends to need a little more pondering lately. hahaha
Anywho.... thanks

Oh, yeah. You need to flash Gapps if you wipe system.

soupmagnet said:
Oh, yeah. You need to flash Gapps if you wipe system.
Click to expand...
Click to collapse
OK, see, now you're messin' with the old man here... hehehe
On one hand I'm hearing if I am only updating my current ROM, I just wipe data and cache.
Then you tell me I have to flash gapps if I wipe System.
But prior you said I only need to wipe system if I'm going from one ROM to a different ROM.
So.... I'm just updating my current ROM. I wipe data and cache, flash the updated ROM, wipe dalvik.... done...
no flash gapps, right?
I need to look at TWRP again to see exactly how it presents the choices. Don't be hatin' on the old guy for bein' dumb now.
OK, booted to TWRP. When I select Wipe my choices are : Cache, Dalvik Cache, Factory Reset, System and then External Storage. So... in your first answer to me when you said to go to a different ROM I should wipe "System and Factory Reset (data and cache)" it appears you are telling me that "System and Factory Reset" is another way of referring to "data and cache". Is that correct?

Gapps go in the /system/app folder so if you wipe the system partition, Gapps will go along with it.

soupmagnet said:
Gapps go in the /system/app folder so if you wipe the system partition, Gapps will go along with it.
Click to expand...
Click to collapse
GAaaahhh..... I just wiped System and watched as it processed /system
and then I wiped Factory Reset and watched as it processed /data and /cache
So I guess that answers my confusion.

[Q] Gapps not working PLEASE HELP

Phone: Samsung-SGH-I747
Carrier: AT&T
Andriod Version: 4.1.2
CM: 10-20121206-NIGHTLY-d2att
CWM: recovery-clockwork-6.0.1.2-d2att
I am unable to find a compatible Gapps that works with this ROM, anytime I flash Gapps I get the
Unfortunately Android Keyboard (AOSP) Stopped
As well as "Connection Error "Retry" when trying to access Google Play.
I've tried wiping the cache within the AOSP Keyboard settings as well, but this seems to be a Gapps error as the Play store stops working.
I have tried gapps-jb-20121011-signed and gapps-jb-20121130-signed.
This is the method of install I have been doing:
1) Wipe data/factory reset
2) Wipe Cache Partition
3) Advanced -->Wipe Davlik Cache
4) Install 10-20121206-NIGHTLY-d2att
5) Install gapps-jb-20121011-signed
6) Reboot
Am I doing this right? Should I wipe cache/partition/davlik cache before gapps install? Whats going on here?
Is there a proper flashing process to make these work? Or is there is comparable stable ROM that has Gapps included and works (JB ONLY)?
I re-rooted my phone and did a clean install with I747UCDLK3_I747ATTDLK3_ATT then root66_ATT_I747UCDLK3 then ROManger CWM download to get where I'm at.
My whole reason to rooting was for Google Now, I've always liked CM's work but am willing to try something else if there are any other suggestions??
Please help, I feel like I've spent WAY too much time on something that seems so simple.

You're doing this right. I don't know what could be wrong.
As a last measure, try format instead of wipe. Format boot, system, data and cache, and flash CM and gapps 20121011 again.
Good luck!

marinierb said:
You're doing this right. I don't know what could be wrong.
As a last measure, try format instead of wipe. Format boot, system, data and cache, and flash CM and gapps 20121011 again.
Good luck!
Click to expand...
Click to collapse
And that did the trick.
Thanks

Messaging and Phone apps keep crashing

Hey all,
I've been searching for a while now and decided I should just post my question finally. I have the Galaxy SIII, rooted, and running CM10 stable. For the last 3 months or so, my SMS app, Messaging, has been randomly force closing and crashing. The only way to fix it is by rebooting the phone. I've tried re-flashing the mod 5 times, and even wiped data and done 2 factory resets. Still no luck.
And more recently my "phone" app has been doing it too. It crashes when I open up the dial pad and drops calls randomly and I have to restart my phone for it to work again.
Both of these will happen randomly. Sometimes I can go 4 hours without having to restart my phone, other times I have to restart my phone every 20 minutes. It's really starting to bug me.
Is there an app that's known to cause these crashes? Or is there a possibility that the mod file is corrupt? Thoughts? Questions? Any help is appreciated!!

When you flashed Cm10, did you come from stock or a custom rom? Did you also format /system?
If you made a nandroid while on stock, I would:
Wipe data, cache, dalvik and restore that. Then (assuming you still have Cm10 and gapps zips on your device) I would wipe data and caches again, format /system and flash rom/gapps. Wipe data/cache and reboot.

xBeerdroiDx said:
When you flashed Cm10, did you come from stock or a custom rom? Did you also format /system?
If you made a nandroid while on stock, I would:
Wipe data, cache, dalvik and restore that. Then (assuming you still have Cm10 and gapps zips on your device) I would wipe data and caches again, format /system and flash rom/gapps. Wipe data/cache and reboot.
Click to expand...
Click to collapse
When I flashed, it was from a previous CM10 ROM that worked fine. I reflashed because one of my apps was getting an "unknown" error, and now this crashing is happening. I don't think I have ever done "format /system". How do I go about that?

tango259 said:
When I flashed, it was from a previous CM10 ROM that worked fine. I reflashed because one of my apps was getting an "unknown" error, and now this crashing is happening. I don't think I have ever done "format /system". How do I go about that?
Click to expand...
Click to collapse
To have a completely clean install, you should always:
Wipe data
Wipe cache
Wipe dalvik (under advanced)
Format /system (under mounts and storage)
Flash rom
Flash gapps
Wipe data
Reboot
Be sure to have whatever you feel important backed up as this will wipe your system. Make a nandroid first if you don't already have one

xBeerdroiDx said:
To have a completely clean install, you should always:
Wipe data
Wipe cache
Wipe dalvik (under advanced)
Format /system (under mounts and storage)
Flash rom
Flash gapps
Wipe data
Reboot
Be sure to have whatever you feel important backed up as this will wipe your system. Make a nandroid first if you don't already have one
Click to expand...
Click to collapse
Thanks!! I'll try it tonight and post with the results tomorrow. Last time I flashed it took 2 days until the problems arose again.

tango259 said:
Thanks!! I'll try it tonight and post with the results tomorrow. Last time I flashed it took 2 days until the problems arose again.
Click to expand...
Click to collapse
There shouldn't be any issues if you have flashed correctly. Many users have also noted that a custom rom performs better when returning to stock and then flashing the new rom via the above procedures. Feel free to pm me your results

What the???
xBeerdroiDx said:
There shouldn't be any issues if you have flashed correctly. Many users have also noted that a custom rom performs better when returning to stock and then flashing the new rom via the above procedures. Feel free to pm me your results
Click to expand...
Click to collapse
To have a completely clean install, you should always:
Wipe data
Wipe cache
Wipe dalvik (under advanced)
Format /system (under mounts and storage)
Flash rom
Flash gapps
Wipe data <------------- ????
Reboot
I can't see this is a good thing, but I'm a noob.
You're saying after installing the new ROM and apps (Flash rom Flash gapps), you then go back into CWM and select 'wipe data/factory reset'??
Again, I'm a noob and maybe I'm reading this wrong!
Doing a wipe again right after installing a new ROM sounds so wrong to me.
What would that do?

RoidRulez said:
Wipe data <------------- ????
Click to expand...
Click to collapse
This step (step 7 in your list) isn't necessary.
When in doubt, follow the directions in the OP of the rom you are trying to flash, usually can't go wrong.

Failed FLASHING S4

Hi guys, don't know if this is going on the right forum or whatever but I have a problem!
So last week I rooted and flashed my phone to 4.4.2 Google Play Edition (I'm a noob to all of this) may I add that I have a GT-i9505 model with an unlocked bootloader etc (as I have an international s4)
Phone was working fine except for a few bugs such as camera application would stop working.
So I decided to have to have a look around at another ROM to change and flash it and I found the 4.4.2 Liquidsmooth ROM (which looks pretty good and seems to be everything I need) so I started to reflash it all again (as I did before) however I have 35% battery and my flash failed with the error
'file_getprop: failed to stat "/system/build.pro" error executing updater binary in zip.
So what is it I'm doing wrong? Is it coz I'm flashing on top of another ROM? I have no idea, can someone point me in the right direction? I'm not using an ext SD card for this either!
If you can a noob version would be awesome! Thank you so much for reading this!

BilalMH said:
Hi guys, don't know if this is going on the right forum or whatever but I have a problem!
So last week I rooted and flashed my phone to 4.4.2 Google Play Edition (I'm a noob to all of this) may I add that I have a GT-i9505 model with an unlocked bootloader etc (as I have an international s4)
Phone was working fine except for a few bugs such as camera application would stop working.
So I decided to have to have a look around at another ROM to change and flash it and I found the 4.4.2 Liquidsmooth ROM (which looks pretty good and seems to be everything I need) so I started to reflash it all again (as I did before) however I have 35% battery and my flash failed with the error
'file_getprop: failed to stat "/system/build.pro" error executing updater binary in zip.
So what is it I'm doing wrong? Is it coz I'm flashing on top of another ROM? I have no idea, can someone point me in the right direction? I'm not using an ext SD card for this either!
If you can a noob version would be awesome! Thank you so much for reading this!
Click to expand...
Click to collapse
Ok you must wipe your old rom first but MAKE A BACK UP, firstly go into recovery (cwm or twrp) and go to "back up" and make a back up. second go to wipe and wipe cache then wipe dalvic cache (if your using cmw you will have to go to advanced on the home screen to wipe dalvic cache)
third go back to wipe and wipe system, after that wipe the cache and dalvic cache just like before
And for the final stage go to install, find the rom you want (will be a zip file) and then flash it, when done wipe cache and dalvic cache one more time then reboot
And bam you should have you new custom rom (you dont have to keep wiping the cache and dalvic cache but its recomended)

bobs158 said:
Ok you must wipe your old rom first but MAKE A BACK UP, firstly go into recovery (cwm or twrp) and go to "back up" and make a back up. second go to wipe and wipe cache then wipe dalvic cache (if your using cmw you will have to go to advanced on the home screen to wipe dalvic cache)
third go back to wipe and wipe system, after that wipe the cache and dalvic cache just like before
And for the final stage go to install, find the rom you want (will be a zip file) and then flash it, when done wipe cache and dalvic cache one more time then reboot
And bam you should have you new custom rom (you dont have to keep wiping the cache and dalvic cache but its recomended)
Click to expand...
Click to collapse
Thank you, this did the trick!

BilalMH said:
Thank you, this did the trick!
Click to expand...
Click to collapse
Glad i could help :laugh:

the most important thing is read, read and read the instruction before applying any flash.
I always do that and never fail