So my auto rotate has stopped working. The box to indicate that it is enabled is ticked, and it was working fine yesterday.
I have tried recalibrating both in normal and safe mode to no avail.
Reset my phone plus recalibrating in both normal and safe mode to no avail (this has now caused the storage issue after backing my phone up yay )
Has anyone else had the screen rotate issue? Have you been able to fix it?
I am also on stock, branded t-mobile so would also like to know can, if anyone had the same problem, this be fixed by the 1.29 update? As I am currently on 1.28 (the auto rotate not the storage, I read that is resolved on 1.29)
well,
I got this strange issue:
at random, my tablet stops using sensors. I see it when I try to turn it to horizontal position from landscape - it doesnt turn the screen. Then I go to this little nice "sensor test" program I downloaded from googleplay and I see all the sensors at 0 ! I see orientation,accelerometer,magnetic field,light and gyroscope all on 0 and moving, covering laptop doesnt do nothing. Only reboot makes difference.
Do You think it could be the software (like custom kernel ) or hardware related problem ? Anybody had this ? I got unlocked Nexus 7 2013 32 Gb (no LTE), using standard rom 4.4.3 but with ElementalX-N7-2.10.1 kernel + boot-ts09-lock.img used for screen touch-related issues.
I was using this setup without any problems (except "standard nexus 7 2013 screen touch problems") for some months, month ago I clicked to download the update from google but it didnt install (most probably cause I got custom kernel/unlocked bootloader), still there were no issues till 2 weeks ago...
Any help appreciated !
I've recently updated to ARHD 7.1 with new firmware base 1.40.401.5. i updated my firmware, clean flashed etc but I am suffering from lack of auto rotate (in gallery or chrome or anywhere) and i seem to have lost the dot view gestures as well as regular taps to wake up screen. my auto-rotate settings are on of course. i somehow deleted my previous nandroid backup and cannot go back to previous rom with base 1.32.417. What am I missing ?
I had some problems with auto-rotate before as well.
Try G-Sensor Calibartion and see if both bubbles move.
My top bubble was stuck when i checked mine. However, after a few days it fixed itself for no reason.
Thx, i,ve actually been testing the g-sensor and my diagnostic test has failed...numerous times. i'm off to repair center
I have been hard resting my phone over and over again, sometimes it fixes it but after 2-3 hours the proximity sensor and rotate stop working all together, I have been attempting to flash my phone because I think it's a software issue, this started randomly happening for no reason, I was on lolipop before but i decided to update my phone to see if it fixes the issue. I tried to recalibrate my rotate sensor but the option is not there when it stops working. I am on t-mobile and I have no warranty, i bought this device off ebay. My OS is marshmallow 6.0.0.
Is there a fix to this issue or something?
AITAWH D85530C_00
Thankyou
As some of you guys might already know Redmi devices have Gyroscope issue but it get fixed with Calibration (in my case temporarily)
previously in Android pie, while playing pubg Gyroscope was working fine with no issue, but i had the issue with my gyroscope while charging where my aim was moving on its own even on a flat surface. but it used to happen while charging only (& my Gyroscope setting is always on with 190 sensitivity just for the info)
And now in Android 10 it happens after every 10, 15 minutes doesn't matter how many times i 've calibrated my device but it never get fixed permenantly.
But I know the temporarily solution:
About > All Specs >Tap 3 times on kernal version > Press on the top right corner & go to additional tools
Acc Calibration Tool:
Accelerometer ( not all values are zero) just calibrate your accelerometer, & your device should be on a flat surface
Gyroscope Calibration Tool:
Gyroscope (all values are zero but some are in (-ve) zero don't know why ?)
Calibrate Gyroscope - also device should be on a flat surface
check your Gyroscope issue with 'Compass app' and values should be constant on a flat surface
You can also use 'Gyroscope Test App'
in my case:
mine only gets fixed after calibrating and waiting for 20 seconds at least. i use Gyroscope test app to know whether my Gyroscope issue is fixed or not
and mine never get fixed after device reboot.
seems like this is the Hardware issue. i tried to hard reset changed rom to miui 12 came back to miui 11 but the issue is still there.
and calibration is the temporarily solution for me until i don't reboot my device.
didn't tried custom rom yet.
Did any of you guys have the similar issue, or any of you know how to fix it? Please Help!
Strange seems like no one is facing this issue
I am facing the same problem from past two days on my redmi note 8 pro . It can be fixed temporarily by rebooting the device . But after opening CIT by tapping kernel version my accelerometer is not showing anything it's blank
gkl1312 said:
I am facing the same problem from past two days on my redmi note 8 pro . It can be fixed temporarily by rebooting the device . But after opening CIT by tapping kernel version my accelerometer is not showing anything it's blank
Click to expand...
Click to collapse
Sorry to say that i cannot help ??
Facing the same issue. Screen doesn't rotate, accelerometer and gyroscope values are blank in CIT
On a steady table using the built in level function in the compass app was showing 1 degree (table not perfectly flat) for a couple of minutes and now it`s changed to 2 degrees and has been showing that for over five minutes, The only problem i have had is if i am on the home-screen in portrait mode with the phone on the table and click on my browser (opera) the screen will change to landscape mode, Then if i lift up the front of the phone the display will change to portrait mode, It does this with a few apps and it can be a pain, I could download a screen rotation all to fix the problem if i needed, So no major problems and i am not phone gamer, I prefer my 360 or PC
i hope this work for you
If your gyroscope is temporary work after restart you can fix it with my guide:
1.restart your device
2.open the cit test (multiple tap on kernel number)
3.calibrate your gyroscope in flat surface and make sure your gyroscope is still active
4.follow the other sensor calibration until you complete the compass calibration .
4.you can exit cit and check all your sensors
note:do this as fast as you can
Nouman112 said:
As some of you guys might already know Redmi devices have Gyroscope issue but it get fixed with Calibration (in my case temporarily)
previously in Android pie, while playing pubg Gyroscope was working fine with no issue, but i had the issue with my gyroscope while charging where my aim was moving on its own even on a flat surface. but it used to happen while charging only (& my Gyroscope setting is always on with 190 sensitivity just for the info)
And now in Android 10 it happens after every 10, 15 minutes doesn't matter how many times i 've calibrated my device but it never get fixed permenantly.
But I know the temporarily solution:
About > All Specs >Tap 3 times on kernal version > Press on the top right corner & go to additional tools
Acc Calibration Tool:
Accelerometer ( not all values are zero) just calibrate your accelerometer, & your device should be on a flat surface
Gyroscope Calibration Tool:
Gyroscope (all values are zero but some are in (-ve) zero don't know why ?)
Calibrate Gyroscope - also device should be on a flat surface
check your Gyroscope issue with 'Compass app' and values should be constant on a flat surface
You can also use 'Gyroscope Test App'
in my case:
mine only gets fixed after calibrating and waiting for 20 seconds at least. i use Gyroscope test app to know whether my Gyroscope issue is fixed or not
and mine never get fixed after device reboot.
seems like this is the Hardware issue. i tried to hard reset changed rom to miui 12 came back to miui 11 but the issue is still there.
and calibration is the temporarily solution for me until i don't reboot my device.
didn't tried custom rom yet.
Did any of you guys have the similar issue, or any of you know how to fix it? Please Help!
Click to expand...
Click to collapse
:::my note8 pro also has same issue
i also tried all the tricks, calibration and all stuff but it only worked temporarily. if i place my phone on flat surface, it stops moving for some minutes but starts moving again.
i even tried changing my miui version from global to indian varient but the problem is still on. these days when i press the phone on top left corner, the gyroscope moves even more faster and when i press it around middle, it starts moving in opposite direction but never stops. somewhere i have hheard that this may be due to hardware issue, because of heating.
Nouman112 said:
As some of you guys might already know Redmi devices have Gyroscope issue but it get fixed with Calibration (in my case temporarily)
previously in Android pie, while playing pubg Gyroscope was working fine with no issue, but i had the issue with my gyroscope while charging where my aim was moving on its own even on a flat surface. but it used to happen while charging only (& my Gyroscope setting is always on with 190 sensitivity just for the info)
And now in Android 10 it happens after every 10, 15 minutes doesn't matter how many times i 've calibrated my device but it never get fixed permenantly.
But I know the temporarily solution:
About > All Specs >Tap 3 times on kernal version > Press on the top right corner & go to additional tools
Acc Calibration Tool:
Accelerometer ( not all values are zero) just calibrate your accelerometer, & your device should be on a flat surface
Gyroscope Calibration Tool:
Gyroscope (all values are zero but some are in (-ve) zero don't know why ?)
Calibrate Gyroscope - also device should be on a flat surface
check your Gyroscope issue with 'Compass app' and values should be constant on a flat surface
You can also use 'Gyroscope Test App'
in my case:
mine only gets fixed after calibrating and waiting for 20 seconds at least. i use Gyroscope test app to know whether my Gyroscope issue is fixed or not
and mine never get fixed after device reboot.
seems like this is the Hardware issue. i tried to hard reset changed rom to miui 12 came back to miui 11 but the issue is still there.
and calibration is the temporarily solution for me until i don't reboot my device.
didn't tried custom rom yet.
Did any of you guys have the similar issue, or any of you know how to fix it? Please Help!
Click to expand...
Click to collapse
negative values are common like north0 east0 west-0 south-0, as referrence points of start and direction
I also have the same problem but it is on REDMI NOTE 10 PRO (INDIA VERSION sweetin), so can someone help us