when I open the RUU， about 10 seconds it close automatic.I do not know why?I have no time to copy the rom.
Do you have the phone connect to the PC when running the ruu?
sent from my android powered beast!
yes
for sure，thanks，I do not know why？
Do you connect the phone to your PC while installing the RUU ?
yes
and also installed HTC driver
Related
When phone in bootloader my PC (running Win7) dont see it... Any suggestions, please
zheads said:
When phone in bootloader my PC (running Win7) dont see it... Any suggestions, please
Click to expand...
Click to collapse
Have you installed HTC Sync, and what are you trying to do?
Yes, sure, HTC installed and works fine. When getting phone in bootloader state PC couldnt find driver "Android 1.0"...
Are you trying to install a rom? I had the same thing, but carried on and put the phone into recovery. Win.7 64bit then installed the driver and it worked.
Try that.
What driver you've installed?
I have HTC sync installed, and the sdk kit. You need both to root.
I have both too.. Sync and SDK
Did you try to go ahead and put the phone into recovery, wait about 10 seconds, then use the recovery windows.bat?
At worst you will just have to take the battery out if it doesn't work...
If it still won't work I'd suggest you use the guide for Tiny Core Linux. It's foolproof and you won't hit any driver issues.
Currently using the Dinc with stock. Unfortunately, I can not root because of business.
I'm having a problem installing the RUU. I connect the Dinc to my computer (W7 64bit) and run the RUU. (I have HTC Sync installed).
When I run the RUU, it will see the phone and it will begin updating. At the point where it restarts the bootloader, the screen on my Dinc will turn black and restart and then appear with HTC.
At this point it will hang and the computer attempts a driver search causing the error 171 - Not able to connect with USB cable.
Can anyone provide any assistance with this? Greatly appreciated!
Sorry if this is confusing but i couldn't find the thread on XDA on the alternate method.
http://www.techpetals.com/how-to-ro...ible-leaked-version-froyo-manual-install-1937
Step 6 is the end for installing just the update and no root.
Viralwhite said:
Currently using the Dinc with stock. Unfortunately, I can not root because of business.
I'm having a problem installing the RUU. I connect the Dinc to my computer (W7 64bit) and run the RUU. (I have HTC Sync installed).
When I run the RUU, it will see the phone and it will begin updating. At the point where it restarts the bootloader, the screen on my Dinc will turn black and restart and then appear with HTC.
At this point it will hang and the computer attempts a driver search causing the error 171 - Not able to connect with USB cable.
Can anyone provide any assistance with this? Greatly appreciated!
Click to expand...
Click to collapse
this happened to me. windows 7x64 did not like the driver switching mid process from android to bootloader, so basically here is what i did.
leave the phone connected (it should have black screen with htc logo). once u get the 171, exit the RUU (if u havent restarted the pc ever, now is a good time - if u restart pc, disconnect phone, battery pop it to get it to boot)
now run the RUU, again u will get the 171 and the phone will be black with htc on it. just exit the RUU and re run the RUU, this time it will run the full process.
I have been using my HTC Desire for a while and have flashed multiple ROMs in the past. Having got the new Galaxy Nexus, passing on the desire to the family.
On the procedure on the flashing RUU I started with flashing a Sense based ROM but my phone after the sense-based ROM phone does charge on USB but there no USB notification neither does the computer recognizes the device.
Again, on flashing CM7 or ICS, USB is detected and phone works fine.
Is there an explanation, please help.
Thanks
vmax007 said:
I have been using my HTC Desire for a while and have flashed multiple ROMs in the past. Having got the new Galaxy Nexus, passing on the desire to the family.
On the procedure on the flashing RUU I started with flashing a Sense based ROM but my phone after the sense-based ROM phone does charge on USB but there no USB notification neither does the computer recognizes the device.
Again, on flashing CM7 or ICS, USB is detected and phone works fine.
Is there an explanation, please help.
Thanks
Click to expand...
Click to collapse
Hi,
Have you tried the pre-rooted stock froyo ROM from teppic74? Give that a try and see if it gives the same issue.
You seem aware of all the processes so I assume full wipes and correct hboots have been used etc.
Sent from my HTC Desire using xda premium
i am quite familiar...am sure the hboot is correct...i tired flashing stock rom to be met with an error, do downgrade my cwm and need the downgrade fow which am missing the downgrade update.zip
Please use the Q&A Forum for questions Thanks
Moving to Q&A
setting
There is a setting which tells what is the USB mode : charging, mass storage device or ask each time. Go to the setting and selects "Ask"
i have done that too
USB debug
vmax007 said:
i have done that too
Click to expand...
Click to collapse
Actually, I've just understood what you want. You have to enable USB debug from
Settings -> Applications -> Development
I have the same problem sb please help
i installed 2 or 3 different roms but still when i plug my desire by usb its charging but pc doesnt recognize my phone?!!
majed.a said:
i installed 2 or 3 different roms but still when i plug my desire by usb its charging but pc doesnt recognize my phone?!!
Click to expand...
Click to collapse
have u got all the drivers installed on ur computer?
also u could flash 4ext recovery and try the usb unbrick option, u mite have usb brick.
Sent from my HTC Desire
jmcclue said:
have u got all the drivers installed on ur computer?
also u could flash 4ext recovery and try the usb unbrick option, u mite have usb brick.
Sent from my HTC Desire
Click to expand...
Click to collapse
i can use fast boot commands, i fixed my memory not recognized error in cwm recovery by using these commands and my pc recongnize my android phone, still i mite have usb brick?
majed.a said:
i can use fast boot commands, i fixed my memory not recognized error in cwm recovery by using these commands and my pc recongnize my android phone, still i mite have usb brick?
Click to expand...
Click to collapse
haha im confused, ur computer doesnt recongnize ur phone but u can use fastboot commands?
anyway u dont have usb brick if u can do fastboot commands.
Sent from my HTC Desire
and i should add extra information to my problem:
when my phone is off and i plug the usb it charge imedietly but when the roms comes up and i plug the usb it takes about 20 sec until it starts to charge...
if u mean when u turn on ur phone then yh. usually starts charging after bootanimation
Sent from my HTC Desire
jmcclue said:
if u mean when u turn on ur phone then yh. usually starts charging after bootanimation
Sent from my HTC Desire
Click to expand...
Click to collapse
No i mean when it gets steady, by the way i changed my rom to mildwild 4.7 this delay fixed, but still not recognizing my storage.
i found another problem : bluetooth doesnt work either.
majed.a said:
No i mean when it gets steady, by the way i changed my rom to mildwild 4.7 this delay fixed, but still not recognizing my storage.
i found another problem : bluetooth doesnt work either.
Click to expand...
Click to collapse
Click the 4ext recovery apk in my sig and install it and flash recovery using the app.
boot into recovery, go down to tools then usb unbrick. see if that works
Sent from my HTC Desire
jmcclue said:
Click the 4ext recovery apk in my sig and install it and flash recovery using the app.
boot into recovery, go down to tools then usb unbrick. see if that works
Sent from my HTC Desire
Click to expand...
Click to collapse
i just got fixed my phone was usb brick, thank u very much jmcclue, u have done me a great favor
Help
After the latest offical OTA 2.17 i cannot connect my phone to my pc. When i plug it in i get the screen askin what i want to do but as soon as i click disc drive it just quits that screen and just charges the phone.
Any ideas anyone
Have you tried completely removing the HTC drivers and reinstalling them?
My HTC one X is not recognized by my PC
I have tried a (battery pull) by holding the power for 10 sec
i've erased everything on the phone by formating it.
ive reinstalled windows
ive reinstalled the htc drivers
ive checked in device manager and nothing comes up when i connect it
ive tried putting the phone in debugging mode
the phone doesnt even ask what to do on connection even if the option is checked!!!
PLEASE HELP!
OK, so please let me ask you couple of questions:
1.what rom you are using at the moment? 2. Did you try on another usb port on your PC?
3.did you try to restart your PC and try again to recognised it?
Regards.
Sent from my HTC One X using xda premium
jorjino2000 said:
OK, so please let me ask you couple of questions:
1.what rom you are using at the moment? 2. Did you try on another usb port on your PC?
3.did you try to restart your PC and try again to recognised it?
Regards.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Thanks for the reply.
My phone is not even rooted... Now, ive even tried updating it to the latest version:
android version 4.1.1 htc sense 4+
software number: 3.17.631.2
ive tried multiple PC's none work.
It could be hardware related. Return it for warranty if you can't get it to work.
TToivanen said:
It could be hardware related. Return it for warranty if you can't get it to work.
Click to expand...
Click to collapse
thats what i also think at this point ! thanks for reply!
have you tried another pc
I had the same problem long time ago with my galaxy s2 and had installed a new windows to my laptop
and it worked with a different pc with a new cable