{?} WIFI(Proxy with NTLM Authentication) - Galaxy Y GT-S5360 General

I'm just curious if someone here has tried to connect to a WIFI with proxy with NTLM authentication. I tried the methods listed here http://android-proxy.blogspot.co.uk/ , but no luck.

if unrooted:
install NTLmaps in your PC.
edit the server.cfg file and make the following changes.
LISTEN_PORT:5865
PARENT_PROXY: your_proxy_server
PARENT_PROXY_PORT: proxy_port
ALLOW_EXTERNAL_CLIENTS:1
now run the ntlmaps in PC and connect your phone through connectify.
change wifi phone settings
proxy server: your comp wifi ipv4 address.
port:5865
*This method does not work for LADP authentication.
if rooted :
Proxydroid + connectify

mirage.gokul said:
if unrooted:
install NTLmaps in your PC.
edit the server.cfg file and make the following changes.
LISTEN_PORT:5865
PARENT_PROXY: your_proxy_server
PARENT_PROXY_PORT: proxy_port
ALLOW_EXTERNAL_CLIENTS:1
now run the ntlmaps in PC and connect your phone through connectify.
change wifi phone settings
proxy server: your comp wifi ipv4 address.
port:5865
*This method does not work for LADP authentication.
if rooted :
Proxydroid + connectify
Click to expand...
Click to collapse
thanks for this... it worked. hehe how bout using usb connection?

nakawanaoki said:
thanks for this... it worked. hehe how bout using usb connection?
Click to expand...
Click to collapse
i dunno any method using usb for a authenticated network.

Related

New Dopod rom - WPA-PSK problem

I've installed new Dopod rom on my HTC P3600. Everything works fine but I cannot connect to my AP using WPA-PSK TKIP. There is connection established but no data transfer. I've tried to connect to the same network using my laptop and everything if ok. Unsecured network also works fine.
Any solution?
andy76
WPA-PSK
Did you make sure you typed in the same wpa code?
Sometimes it can drive us nuts,seems like that could be one of the issues.Check on the MAC filter,DHCP server,make a file with the wpa-psk code that is on the pc and store it in the SDcard after that copy and paste when you set up the wifi on the HTC.
I use the same WPA-PSK TKIP, and I have no problem at all...
Work fine for me...
I've a WPA-PSK Tkip and a WPA-PSK AES working.
Did you correctly setup date and time on your device?
Ciao
Same problem here. 'WPA2 PSK Mixed Mode (TKIP+AES)' not working with the new ROM. It tries to connect then the AP becomes 'Available' again.
Kris
Kris404 said:
Same problem here. 'WPA2 PSK Mixed Mode (TKIP+AES)' not working with the new ROM. It tries to connect then the AP becomes 'Available' again.
Kris
Click to expand...
Click to collapse
Sorry but I can't confirm your issue: one of mine AP is setup in mixed mode and I can connect with WPA2/AES without any problems.
If it is a device issue, check if any program has overwritten a system dll wih an old version...
But a behavior like this let me think about a wrong password or a system time problem...
Ciao
my trinity is not connecting to the ap when i use dhcp. if i use a static ip address the connection works.
Thank You all for your replies. The data and time is set properly. The password is ok. I've changed router settings - cipher from TKIP to mix mode. It's helped.
Regards,
andy76

Opera Mini 4 and T-zones proxy hack

I was able to install Opera Mini 4 via usb cable with my computer onto my Dash phone and O.M. is a lot better than IE in my opinion. However, once I disconnect the usb cable, O.M. no longer is able to connect. When I use the usb cable again, it still won't connect. " Failed to connect to the Internet " is the message that'll appear on my phone. The only time it will connect is when I re-install O.M. while synced with the computer via usb cable. It seems like to be a one time deal only each time.
I'm just wondering if there is some sort of proxy hack for this and has O.M. 4 worked for anyone who is using the 5.99 t-zones proxy hack.
Thanks in advance !
Ok, my first post was edited. Ignore my 2nd one which is this.
I used the proxy hack and it works like a charm. Try restarting your phone and see if the proxy hack works with Opera (which it should work for sure).
Thanks for the reply, jdoggraz.
I have tried soft rebooting severals times and O.M. still doesn't connect. That same message ( Failed to connect to the Internet ) still appears.
Any other suggestions will be greatly appreciated !
I believe I had to go to menu/tools/settings and change the protocol from socket to http before it would work.
Well try to log into Internet Explorer first in order to start up "edge." Then give it a shot with Opera while it is connected to edge. Then once you get this going you can close IE up and just run Opera. This step is done in order to get edge to be "on."
Tried both of your guys' suggestions and it's still unable to connect. Will it work using the regular t-zones w/out the proxy hack?
Yes, it can work. I'm assuming your still using WM 6.0?
1. The problem is the java manager that ships with the Dash doesn't allow installed programs to use the proxy. You need to install a new java manager called jbed. Read this link for instructions on how to do it: http://pdaphonehome.com/forums/ppc-...ed-includes-info-new-java-midlet-manager.html
2. A 2nd (possible) option is to lose the proxy all together. T-Mobile has a new access point that doesn't require a proxy setting to access the internet, even on the $5.99 plan.
Go into your Data connection and use these settings:
Connects to: The Internet
Access Point: epc.t-mobile.com
Leave the rest blank and it should work. I've been using this for almost two weeks without problem.
jdoggraz said:
Well try to log into Internet Explorer first in order to start up "edge." Then give it a shot with Opera while it is connected to edge. Then once you get this going you can close IE up and just run Opera. This step is done in order to get edge to be "on."
Click to expand...
Click to collapse
Still no success. Just curious though, what are your exact proxy settings?
aaronb532 said:
Yes, it can work. I'm assuming your still using WM 6.0?
1. The problem is the java manager that ships with the Dash doesn't allow installed programs to use the proxy. You need to install a new java manager called jbed. Read this link for instructions on how to do it: http://pdaphonehome.com/forums/ppc-...ed-includes-info-new-java-midlet-manager.html
2. A 2nd (possible) option is to lose the proxy all together. T-Mobile has a new access point that doesn't require a proxy setting to access the internet, even on the $5.99 plan.
Go into your Data connection and use these settings:
Connects to: The Internet
Access Point: epc.t-mobile.com
Leave the rest blank and it should work. I've been using this for almost two weeks without problem.
Click to expand...
Click to collapse
Thanks for the link but the jbed file was invalid. I did a hard reboot and had my default settings for t-zones but still no luck. Now I want O.M. more than ever !
TEE82 said:
Thanks for the link but the jbed file was invalid. I did a hard reboot and had my default settings for t-zones but still no luck. Now I want O.M. more than ever !
Click to expand...
Click to collapse
Did you try the new Access Point? The default AP is wap.voicestream.com. Change that to epc.t-mobile.com and see if that works.
aaronb532 said:
Did you try the new Access Point? The default AP is wap.voicestream.com. Change that to epc.t-mobile.com and see if that works.
Click to expand...
Click to collapse
Yeah and it still won't connect to the internet. I also did a soft reboot prior and attempted w/the new AP again but still the same result so now I had changed it back to it's default AP. Oh, and to answer your previous question, I have wm 6.
Here are my exact settings:
Description: T-Zones Proxy
Connects from: Wap Network
Connects to: The Internet
Proxy (name : port): 216.155.165.50:8080
Type: HTTP
User name: <blank>
Password: <blank>
Connects to: WAP Network
Access point: wap.voicestream.com
User name: <blank>
Password: <blank>
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP address: <blank>
Internet Explorer: "Automatically detect settings" is unchecked.
Select Network: The Internet
Now I'm just wondering if any of those settings have to be tweaked for O.M. to work. Thanks again y'all for all the help.
Now I'm just wondering if any of those settings have to be tweaked for O.M. to work. Thanks again y'all for all the help.
Click to expand...
Click to collapse
Those settings are not the problem, the java manager is. If you want to use OM over the proxy you need the esmertec jbed manager. I did a search and found a couple threads that still have different versions of it.
http://forum.xda-developers.com/showthread.php?t=330369&highlight=jbed
http://forum.xda-developers.com/showthread.php?p=2517768#post2517768
You could also upgrade your OS to WM6.1. Both Kavana and Rickwyatt's Roms have it preinstalled.
Just make sure you're ready to do a hard reset if things don't go well!
Thanks Aaron, my O.M. finally is able to connect to the internet now ! For some reason, I clicked on the 2nd link first and was able to install the cab file but there was some sort of error opening it up. The first link (Cloudyfa EsmertecJbed cab file), however, worked great and I was stoked to see O.M. up and functioning now .
I tried googling for answers but found none. This site is really awesome with some really cool and helpful folks and info. Thanks again y'all and Aaron, you the MAN !
TEE82 said:
Thanks Aaron, my O.M. finally is able to connect to the internet now ! For some reason, I clicked on the 2nd link first and was able to install the cab file but there was some sort of error opening it up. The first link (Cloudyfa EsmertecJbed cab file), however, worked great and I was stoked to see O.M. up and functioning now .
I tried googling for answers but found none. This site is really awesome with some really cool and helpful folks and info. Thanks again y'all and Aaron, you the MAN !
Click to expand...
Click to collapse
AARON YTMND!

[Q] How to browse VPN files

I need help viewing my shared files over my VPN.
OK so I have setup a VPN on my Win7 machine, port forwarded pptp in my router and have successfuly added the VPN on my DHD. The Android device connects OK (something has popped up in Win7 about RAS (Dial In) Interface, not too sure about this) but I cannot seem to view any of my shares in ES File Explorer under LAN.
I have added a new server (while connected to VPN) in ES File Explorer using the IP of my Win7 wireless network connection (192.168.0.103) but it wont display anything.
server: 192.168.0.103
Username: username
Password: *******
Each tme I try to connect it says:
"smb://192.168.0.103/
Network path not found or time out"
Anybody got any ideas on how to get this working?
fubofo said:
I need help viewing my shared files over my VPN.
OK so I have setup a VPN on my Win7 machine, port forwarded pptp in my router and have successfuly added the VPN on my DHD. The Android device connects OK (something has popped up in Win7 about RAS (Dial In) Interface, not too sure about this) but I cannot seem to view any of my shares in ES File Explorer under LAN.
I have added a new server (while connected to VPN) in ES File Explorer using the IP of my Win7 wireless network connection (192.168.0.103) but it wont display anything.
server: 192.168.0.103
Username: username
Password: *******
Each tme I try to connect it says:
"smb://192.168.0.103/
Network path not found or time out"
Anybody got any ideas on how to get this working?
Click to expand...
Click to collapse
Try use ciffs manager. )
Sent from my Desire HD using XDA App
mero01 said:
Try use ciffs manager.
Click to expand...
Click to collapse
Just one "f" - you can find it in the market by searching for CifsManager or just Cifs.
Note that you will need to have the correct kernel modules (i.e. slow-work.ko and cifs.ko) for your kernel inserted (i.e. loaded, on your rooted phone) for CifsManager to work.
You can find more info here:
http://forum.xda-developers.com/showthread.php?t=821717
Thanks for the replies guys. In the end I just gave up and setup an ftp server on my PC
Sent from my Desire HD using XDA App

[Q] 802.1x Enterprise with PEAP GTC wireless connection problem

Hi everybody.
I just bought a desire hd. i can connect every wireless connection WEP, WPA, WPA2 etc. but i can not connect 802.1x Enterprise with peap gtc network
My friend has a Galaxy Ace he can connect same with 802.1x peap gtc network. his firmware also Android 2.2
I'm configuring same as he did but still can not connect it.
I don't know what is my Desire HDs problem?
can anybody help me?
I solved my problem
t is very sad that WPA2-Enterprise is not available to be configured in the WIFI-Settings dialog. But if you know how to configure it by hand you can get it to work. I want to use my schools WPA2-Enterprise so I tried it and found out how to get it working. I will explain my taken steps below so you can as well get it to work. The trick behind is that you edit the /data/misc/wifi/wpa_supplicant.conf by hand. In that file the configuration of the wifi-networks is saved. You need to add the following lines: (in my example for the HSR-Secure network)
network={
ssid="HSR-Secure"
key_mgmt=WPA-EAP
identity="<username without 'hsr\'>"
password="<your password>"
}
For those who don’t know how to do that here some more explanation. To edit the mentioned file above your phone has to be rooted. Than you need the Android SDK installed on your computer (we will need adb.exe). You need the usb cable to connect the phone to your computer. Open a command line shell and go to your android-sdk tools folder and then do the following (thanks to Thomas Kälin for this easier version):
# Copy the config file from the phone to your computer:
adb pull /data/misc/wifi/wpa_supplicant.conf C:/MyFolder
# Now Edit your wpa_supplicant.conf with your favorite editor and load it back to your phone:
adb push C:/MyFolder/wpa_supplicant.conf /data/misc/wifi/wpa_supplicant.conf
Now go to the wifi settings in your phone. Turn wifi off and on again. It should successfully connect now. Here some pictures to show how it should look like when working.
android-hsr-secure android-hsr-secure2
I hope this helps some of you to get WPA2-Enterprise working.
Have fun surfing the internet with your phone at work/school .
Click to expand...
Click to collapse
Source: blog.pboos.ch/2009/04/android-using-wpa2-enterprise/
Yes finally got this working using the FULL WIFI App from the market. Thanks for the help I did use some suggestions.
maydin said:
I solved my problem
Source: blog.pboos.ch/2009/04/android-using-wpa2-enterprise/
Click to expand...
Click to collapse
Adding the password line worked perfectly.

[TUT] how to fix wifi connection problem + enabling wifi adhoc connection

I've heard a lot of us sometimes got a problem with wifi connection. In my past experience, using this mod will solve these problem. it also enable internet sharing connection thru adhoc connection.
1. download this file.
http://www.mediafire.com/?n577pg7uf39w3xu
2. with root explorer open /system/bin. rename wpa_suplicant to wpa_suplicant.bak (for backup).
3. copy the downloaded file to /system/bin.
4. change the permission to 777 (rwxrwxrwx)
how to use adhoc connection (for windows user):
1. open network and sharing centre.
2. click setup new network. choose adhoc connection. press next
3. give name the new connection. choose no-authentificatin for the connection type.
4. clik OK. don't forget to enable internet connection share.
source:http://www.kaskus.us/showpost.php?p=638650846&postcount=3803
PS: this mod only work with open adhoc connection. you can't connect thru secured adhoc connection. no need to thanks nor press thanks button. all credits for original uploader/dev
thanks man!!!
You are so Good!!
One Thanks From Me
you're welcome
How to change permission?
Ali Asidqi said:
How to change permission?
Click to expand...
Click to collapse
Download Root explorer and then locate the file
long press and when a popup comes out browse for permissions..
change to the specified permissions by kurotsugi
if you use root explorer, press and hold the file, permission, tick all option
what's wifi adhoc for sir? is this for file sharing via wifi?
ad hoc?
if you have a laptop or a PC with wifi and already connected to internet, you can make an adhoc connection to share your internet connection with others. in normal situation we can't detect adhoc connection with our device. with this simple mod we can detect and connect to any unsecured adhoc connection.
????
I use connectify to share internet pc with wifi to my device..
Are this same purpose with different method???
yup...it has same purpose but different method.
kurotsugi said:
I've heard a lot of us sometimes got a problem with wifi connection. In my past experience, using this mod will solve these problem. it also enable internet sharing connection thru adhoc connection.
1. download this file.
http://www.mediafire.com/?n577pg7uf39w3xu
2. with root explorer open /system/bin. rename wpa_suplicant to wpa_suplicant.bak (for backup).
3. copy the downloaded file to /system/bin.
4. change the permission to 777 (rwxrwxrwx)
how to use adhoc connection (for windows user):
1. open network and sharing centre.
2. click setup new network. choose adhoc connection. press next
3. give name the new connection. choose no-authentificatin for the connection type.
4. clik OK. don't forget to enable internet connection share.
source:http://www.kaskus.us/showpost.php?p=638650846&postcount=3803
PS: this mod only work with open adhoc connection. you can't connect thru secured adhoc connection. no need to thanks nor press thanks button. all credits for original uploader/dev
Click to expand...
Click to collapse
We have a wifi here at office. I can connect to it but i can't browse. Our company uses a HTTP proxy. I know the username and password. Can you mod our sgy to use proxy with NTLM auhtentication?
go to setting. wifi. advance. you can set the proxy setting there.
kurotsugi said:
go to setting. wifi. advance. you can set the proxy setting there.
Click to expand...
Click to collapse
where is the input for the password?
if you're trying to acces a secured connection you'll get prompted to fill the password.
Hi, i tried following this guide but still no luck, can you please help me with my wifi problem, I am having a "wifi error" when I start my wifi, I am on a chobits 2.0 ROM with Merruk Kernel...
I never use merruk kernel for my daily use. you can try to use another kernel. if the problem still exist it means it was kernel bug.
Read-only
"Warning
You cannot paste here because the file system is read-only."
How can i paste the downloaded file on /system/bin?
falcon0809 said:
"Warning
You cannot paste here because the file system is read-only."
How can i paste the downloaded file on /system/bin?
Click to expand...
Click to collapse
Press button Mount R/W at top and it will show Mounted as r/w..
Sent from my GT-S5360 using xda app-developers app

Categories

Resources