Develop Bugs

[Q] 802.1x Enterprise with PEAP GTC wireless connection problem

Hi everybody.
I just bought a desire hd. i can connect every wireless connection WEP, WPA, WPA2 etc. but i can not connect 802.1x Enterprise with peap gtc network
My friend has a Galaxy Ace he can connect same with 802.1x peap gtc network. his firmware also Android 2.2
I'm configuring same as he did but still can not connect it.
I don't know what is my Desire HDs problem?
can anybody help me?

I solved my problem
t is very sad that WPA2-Enterprise is not available to be configured in the WIFI-Settings dialog. But if you know how to configure it by hand you can get it to work. I want to use my schools WPA2-Enterprise so I tried it and found out how to get it working. I will explain my taken steps below so you can as well get it to work. The trick behind is that you edit the /data/misc/wifi/wpa_supplicant.conf by hand. In that file the configuration of the wifi-networks is saved. You need to add the following lines: (in my example for the HSR-Secure network)
network={
ssid="HSR-Secure"
key_mgmt=WPA-EAP
identity="<username without 'hsr\'>"
password="<your password>"
}
For those who don’t know how to do that here some more explanation. To edit the mentioned file above your phone has to be rooted. Than you need the Android SDK installed on your computer (we will need adb.exe). You need the usb cable to connect the phone to your computer. Open a command line shell and go to your android-sdk tools folder and then do the following (thanks to Thomas Kälin for this easier version):
# Copy the config file from the phone to your computer:
adb pull /data/misc/wifi/wpa_supplicant.conf C:/MyFolder
# Now Edit your wpa_supplicant.conf with your favorite editor and load it back to your phone:
adb push C:/MyFolder/wpa_supplicant.conf /data/misc/wifi/wpa_supplicant.conf
Now go to the wifi settings in your phone. Turn wifi off and on again. It should successfully connect now. Here some pictures to show how it should look like when working.
android-hsr-secure android-hsr-secure2
I hope this helps some of you to get WPA2-Enterprise working.
Have fun surfing the internet with your phone at work/school .
Click to expand...
Click to collapse
Source: blog.pboos.ch/2009/04/android-using-wpa2-enterprise/

Yes finally got this working using the FULL WIFI App from the market. Thanks for the help I did use some suggestions.

maydin said:
I solved my problem
Source: blog.pboos.ch/2009/04/android-using-wpa2-enterprise/
Click to expand...
Click to collapse
Adding the password line worked perfectly.

no Internet S8530XPKG6

after i flash to S8530XPKG6 i can't connect to internet both gprs/wifi, through only wifi i can access to Youtube. browser, IM. facebook, samsung application,social hub are not working. when i try to connect giving[ Error Network not available 0xff01] [set connection for network services]etc. pls. help

go to setting-network-connection ,click yes and choose new
here you have to create new connection of your Operator
Most times you need to fill only "access name"
find your Operator's access name.
and your internet will work
sorry of my bad english...

only after creating the access point, you can connect to the internet via wifi..if you are not subscribed for the data plan then create a dummy and select it as default...after this you should be able to use wifi for apps as well

Thanks mate, it's working now.
litebass2 said:
go to setting-network-connection ,click yes and choose new
here you have to create new connection of your Operator
Most times you need to fill only "access name"
find your Operator's access name.
and your internet will work
sorry of my bad english...
Click to expand...
Click to collapse

Thanks mate, now ok
stephenlb4u said:
only after creating the access point, you can connect to the internet via wifi..if you are not subscribed for the data plan then create a dummy and select it as default...after this you should be able to use wifi for apps as well
Click to expand...
Click to collapse

Mark the thread as {SOLVED}

[Tips] Transfer files easily from your Windows 7 PC to your Android

Hello, i am new here, and i will begin with this post
What do you need:
Android phone (obviously)
Windows 7 PC (XP are not tested, testers welcome)
X-Plore File Manager
Home WiFi Network
Steps:
1. Download X-Plore file manager at Play Market. (i cannot post links now)
2. Go to Control Panel > Network and Sharing center > Advanced sharing settings > click all to on. (if you are unsure / have an unsecured network just do this everytime you want to transfer!)
3. Connect your phone to your wifi network
4. Open X-Plore
5. Set up the LAN (if hidden click show > show LAN)
6. Add server. (Scan is not working on me.)
7. fill in the blanks. path and domain do not need to be filled. Username is your windows username and password if you use (blank if not used).
8. fill the IP with 192.168.1.2 (you can try with 192.168.1.3 / 1.4 etc.. 1.2 usually works if you connect the PC first.)
9. click test. (if connection failure go back to step 8!)
10. now you can open your Users directory! (if you want to open the C:/ D:/.. open the settings in X-Plore and switch Show Hidden Files to on)
now you can upload and download files from or to your PC!
if there is any questions you can ask here. I will reply as soon as i can.

i do all the steps correct, i find my server, but when i try to enter in the server i get wrong username password, i enter my windows user id and i dont have any password to my account.

good advice, but i find the SGY screen too small for browsing my PC.
I prefer using Samba Filesharing (https://play.google.com/store/apps/details?id=com.funkyfresh.samba) and access my SD Card from my windows PC

wifi file transfr pro
Sent from my GT-S5360 using xda app-developers app

Just use airdroid )
Sent from my GT-S5360 using xda premium

blackjack1942 said:
Just use airdroid )
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Yep. Airdroid is the best of all Ive tried!

for me this is the best,full Access and exchange data whenever I want and when tethering.:good:give it a try,its awesome.
http://forum.xda-developers.com/showthread.php?t=1752928

LoL I'm always using bluetooth D:

Airdroid is better.
With airdroid you don't need to install nothing in your computer. And it's better because you can install apps, read your messages, call to somebody and it's all in your web browser.

but with the method from my post u have full acces of all files on the device,you can install apps,full acces of system files,send sms,costomize your phone,you can make all what you want and many more and thats all in tethering mode.with airdroid it doesnt go.for me tha best.and its all in your webbrowser too.

Tested and fully working on vista
thanks

Confirmed working on Win 8.1
however my setting is different
in X-plore windows, the fields need to be filled are Server; Username; Password
[Server]
you can find the IP by opening up cmd and type "ipconfig"
look at IPv4 Address, that's what you have to type in server field
[Username]
this field, type your windows ID (the ID you use with windows store)
[Password]
the password of your windows ID
Hope it helps for Win 8.1 user

revomalik said:
Confirmed working on Win 8.1
however my setting is different
in X-plore windows, the fields need to be filled are Server; Username; Password
[Server]
you can find the IP by opening up cmd and type "ipconfig"
look at IPv4 Address, that's what you have to type in server field
[Username]
this field, type your windows ID (the ID you use with windows store)
[Password]
the password of your windows ID
Hope it helps for Win 8.1 user
Click to expand...
Click to collapse
Thank you for the ipconfig info; I couldn't get it to work because I didn't know what the server address was. X-plore should include this information in their wiki page.

I constantly get 0xC00000BB error from X-Plore eventhough i properly configured my Windows 7 to be logged in.
Is there anyone having problems related to X-Plore's LAN feature that is not working properly?

kimiraikkonen85 said:
I constantly get 0xC00000BB error from X-Plore eventhough i properly configured my Windows 7 to be logged in.
Is there anyone having problems related to X-Plore's LAN feature that is not working properly?
Click to expand...
Click to collapse
I was using X-plore on my Xiaomi mi Box 4s without any issues but after reset my router X-plore doesn't find my pc on Lan network....
I didn't find a solution yet....

[Q] connect to Ad Hoc

I play in a xperia rom official version 2.3.4 (4.0.2.A.0.42)
rooted and unlocked bootloader
someone help me to access a ad hoc play on my xperia!
cordially

extract the attached file then use root explorer to overwrite the file wpa_supplicant file to the folder /system/bin, remember to set permission to R/O

dont work
its not working with xperia play, I think it works with another termina
thx
up!

I faced the same issue few months back..
As far as i knw...adhoc support may come in ICS.....meanwhile try this on the PC/laptop/Server you want to connect.......assuming u r on Win7...
1. Open command prompt with administrator privileges(right click, run as administrator) and type
netsh wlan set hostednetwork mode=allow ssid=samsung key=password keyUsage=persistent
Click to expand...
Click to collapse
2. then type
netsh wlan start hostednetwork
Click to expand...
Click to collapse
Now check your phone wifi settings u will have a AP with name samusng. Password is "password".
3. To stop replace start with stop in the above command.
This is pretty safe and wont effect any other network settings. If other people are also connected to the old ad-hoc network, tell them to connect to this new network...
If the above doesnt work, disable data on your play and enable wifi hotspot....connect to it via ur pc....and then u may share the internet connection of the pc to play.....or play multiplayer game....
Hope this helps!

Hi!
I borrow the thread instead of making a new one since I want Ad-hoc to work as well, and I'm "only" (better IMO) on Win XP.
And I wonder, is the "WiFi Ad Hoc enabler" app compatible and working with the Xperia Play?
And I got the official 2.3.4 ROM as well, version 4.0.2.A.0.42.
Thanks in advance.
Best regards RazerBlader.

help
up

[Q] [ResurrectionRemixKK] Unable to connect to (some) WiFi Networks

Hello,
I am running Resurrection Remix v5.0.5-20140309 on my Note 2, upgraded from v5.0.2-20140212.
And since then, it doesn't connect to some WiFi networks like my home WiFi. When I activate WiFi, no automatic connection and when trigerring a manual connection from the WiFi menu, it directly to disabled state and doesn't even try to connect (it seems).
Hoewever, it connects normally to my work WiFi.
Note that my home wifi runs on 2,4GHz, my work wifi on both 2,4 and 5GHz.
Any thoughts ?
Thanks.
.ant1

Go to the /data/misc/wifi/ way with a root file manager and open this text file name as wpa_supplicant.conf . Find your home wifi. Look the text "autojoin=" is 0 or 1. If it 0, change to 1.
Try it, maybe work.

OguzhanVarsak said:
Go to the /data/misc/wifi/ way with a root file manager and open this text file name as wpa_supplicant.conf . Find your home wifi. Look the text "autojoin=" is 0 or 1. If it 0, change to 1.
Try it, maybe work.
Click to expand...
Click to collapse
No mention of autojoin in my wpa_applicant.conf file.
However, I don't know how, it happens that when I was editing the file, my device shows the WiFi icon on the header. But it disappeared right after and back to the same situation.
.ant1

ant1fr said:
No mention of autojoin in my wpa_applicant.conf file.
However, I don't know how, it happens that when I was editing the file, my device shows the WiFi icon on the header. But it disappeared right after and back to the same situation.
.ant1
Click to expand...
Click to collapse
If delete this file dont worry. Reboot your phone, device is make a file

OguzhanVarsak said:
If delete this file dont worry. Reboot your phone, device is make a file
Click to expand...
Click to collapse
Actually it recreates the file from itself without the need of rebooting the phone. And the new file has all my previous known WiFi networks connection details.
But it still doesn't fix anything.
.ant1