Whats up everyone? I just upgraded from an apache to a vogue. I went through the steps to get it on metropcs and it worked fine. When it still had the Alltel rom on it I called metropcs and added the web service. I set it up and it worked fine!!!!! The only problem I had with it was everytime after I disconnected the username and password cleared out somehow.
When I updated with the alltel rom I forgot to soft reset before the provision .cabs installed. I read somewhere to do a hard reset and soft reset before the provisioning. Now no matter what I do when I try to connect it always says the username or password is wrong. I have even tried upgrading the rom and its the same thing. I do know how to setup the connection and everything. I have done it before. All of the proxy settings are correct and I changed it to simple ip only.
I double checked and made sure that the internet was working on my real metropcs phone and its fine. Some help would be greatly appreciated.
Go into your espt ##778 or ##778# and check your M.IP fields under the M.IP default profile and the M.IP settings profile. Not being familiar with metro but knowing they are very similiar to cricket I would suggest changing the MIP mode to SIP from MIP preferred as you have done. That may fix it in itself as the big carriers use MIP authentication where cricket does not (assuming metro follows suit.) If not check your username and password settings under epst security tab and NAI fields under the M.IP default profile.
I had the wrong password or username problem and what I did was activate my old phone, get the data connected on that phone, then reactivate my vogue, *228, remove battery procedure and magically it worked after that
of course this was after days of going through all sorts of settings, qpst, cdma workshop and all sorts of stuff I can't even remember that seemingly did absolutely nothing
woodicw: Well i had the same problem with my alltel 6800 and wow that battery magic trick sure worked...LOL...QPST couldn't even help...LOL...I'm so glad I own a Vogue as well or i would have never found this.
Thanks-a-Million for sharing that information. Cheers!!!
I've got voice and texting working, I believe. But I can't get data to work. Can anyone help me out, please?
[EDIT] A little for info. I keep getting the error code 67 registration failure. Your PCS Vision username and/or password may be incorrect, or something. Saying invalid username/password. I have changed the username to my Boost Mobile one. But I don't know anything about changing the password.
Have you tried doing a profile update, thats how the fone gets its network access info and if the the fone is linked to your boost mobile account it should provide the username and password.
PS. What does the fone show up as if you look on your account online. Just curious.
Sent from my PC36100 using XDA App
I try and do a profile update, but it says the update has failed please try again later. I don't think it will work since the Evo is not actually supposed to be on Boost Mobile?
This is exactly what you need to do.. The phone that you cloned, to get the evo on the network.. You need to get the Shared AAA Secret and HA Shared Secret PAssword. I had this same problem with my EVo when cloning it with the samsung moment.. THIS IS WHAT YOU NEED! TRUST ME.. I spent months trying to figure out my problem and found it to be this.. This is the only method that can get you up and running. The HA Shared Secret is in Hex Format.. ill see if i can find that same guide that i used and post it later
Stevesteve64 said:
This is exactly what you need to do.. The phone that you cloned, to get the evo on the network.. You need to get the Shared AAA Secret and HA Shared Secret PAssword. I had this same problem with my EVo when cloning it with the samsung moment.. THIS IS WHAT YOU NEED! TRUST ME.. I spent months trying to figure out my problem and found it to be this.. This is the only method that can get you up and running. The HA Shared Secret is in Hex Format.. ill see if i can find that same guide that i used and post it later
Click to expand...
Click to collapse
Thanks, but I don't even see an option anywhere to set those kind of passwords. Even in QPST I can't find it.
Alright, I found all the options to set those kind of passwords. But I can't find the passwords on the Boost Mobile phone to set them as. It's a Motorola W385.
evo data connection
hello emrys_90 i was wondering if youeverfound a way to get the aaa & ha secrets from the mototola w385 i am having the same exact problem for a while tried bitpim and qpst & qxdm says file blocked by ip server i would be ecstatic if you or anyone else would be able to help me with this also is there some wat to get secret codes on the w385 to work i tried #073887* and other codes my phone does nothing in advance thanks to all
Emrys_90 said:
Alright, I found all the options to set those kind of passwords. But I can't find the passwords on the Boost Mobile phone to set them as. It's a Motorola W385.
Click to expand...
Click to collapse
can you point me in the right direction to finding the info on moto w385
Emrys_90 said:
I've got voice and texting working, I believe. But I can't get data to work. Can anyone help me out, please?
[EDIT] A little for info. I keep getting the error code 67 registration failure. Your PCS Vision username and/or password may be incorrect, or something. Saying invalid username/password. I have changed the username to my Boost Mobile one. But I don't know anything about changing the password.
Click to expand...
Click to collapse
Just do a ##rtn# and reset it. That's what I did after I put my evo on boost. It did the hands free activation and everything. Try that
tonsdog said:
Just do a ##rtn# and reset it. That's what I did after I put my evo on boost. It did the hands free activation and everything. Try that
Click to expand...
Click to collapse
IT WORKS!!
you are not getting 3G speeds if you just do a ##rtn# reset only 1x speeds. you have to get profile 0 user names and passwords from a incognito in order to get evdo rev a speeds or a rant to get slower evdo rev 0 speeds. to check dial ##33284# on your evo and go to data status you will see either evdo if you have 3G or 1xrtt if you have regular non 3g data speeds. just cause the 3G signal pops up does not mean you have 3G
scoukjr said:
you are not getting 3G speeds if you just do a ##rtn# reset only 1x speeds. you have to get profile 0 user names and passwords from a incognito in order to get evdo rev a speeds or a rant to get slower evdo rev 0 speeds. to check dial ##33284# on your evo and go to data status you will see either evdo if you have 3G or 1xrtt if you have regular non 3g data speeds. just cause the 3G signal pops up does not mean you have 3G
Click to expand...
Click to collapse
I did this and it said I was on Evdo Rev A but my speeds are still horrible!
tonsdog said:
Just do a ##rtn# and reset it. That's what I did after I put my evo on boost. It did the hands free activation and everything. Try that
Click to expand...
Click to collapse
I'm trying this for Virgin Mobile and I get past the failed registration part now but now it just tries to load and says network timed out.
tonsdog said:
Just do a ##rtn# and reset it. That's what I did after I put my evo on boost. It did the hands free activation and everything. Try that
Click to expand...
Click to collapse
My phone calls and texts work, Just keep getting "Data Call Failure" Error Code 67 .Registration failure. Your PCS Vision username and/or password may be incorrect. Please try again.
When I hit ##786(RTN)# It bring up Reverse Logistics Support? I hit "Menu" to do a "RESET", and then it powers down & reboots. Logo pops up that it is updating I guess. Again it powers down comes back up as new. Lost everything? Your account could not be validated?
TANGO*BLAST said:
My phone calls and texts work, Just keep getting "Data Call Failure" Error Code 67 .Registration failure. Your PCS Vision username and/or password may be incorrect. Please try again.
When I hit ##786(RTN)# It bring up Reverse Logistics Support? I hit "Menu" to do a "RESET", and then it powers down & reboots. Logo pops up that it is updating I guess. Again it powers down comes back up as new. Lost everything? Your account could not be validated?
Click to expand...
Click to collapse
Do a ##data# then data profile reset and then do a rtn reset. Make sure you are on a stick Rom or it won't work. If it still don't work set your mdn & Msid to 0000001234 then reset it rtn
Sent from my PC36100 using XDA Premium App
Tried Changing MEID to donor as it is wrong. When I "RequestNVItemWrite MEID 0x00A0000000000000" I get "RequestNVItemWrite - Error response received from target" in QXDM found 3 MEID's @ 00075184, 00033960, & 0003E520 How can I figure out the address to type in? For example:
ESN addresses:
00FD:0DC8
00FD:2694
00FE:381C
ESN addresses:
0127:BCCC
015F:8D48
017C:79BC
017C:7E1C
017C:E2D8
017C:F1D4
0188:B65C
01D4:3C01
I am receiving text messages & phone calls. Even though, my MEID is wrong on my EVO. I used HxD-Editor to find MEID's (3). Corrected them, but still can't write to EVO using QXDM? I am assuming this is why data isn't working? I am running Android2.2 Baseband 2.15.00.11.19
TANGO*BLAST said:
Tried Changing MEID to donor as it is wrong. When I "RequestNVItemWrite MEID 0x00A0000000000000" I get "RequestNVItemWrite - Error response received from target" in QXDM found 3 MEID's @ 00075184, 00033960, & 0003E520 How can I figure out the address to type in? For example:
ESN addresses:
00FD:0DC8
00FD:2694
00FE:381C
ESN addresses:
0127:BCCC
015F:8D48
017C:79BC
017C:7E1C
017C:E2D8
017C:F1D4
0188:B65C
01D4:3C01
Click to expand...
Click to collapse
So, did you finally changed? how?
TANGO*BLAST said:
I am receiving text messages & phone calls. Even though, my MEID is wrong on my EVO. I used HxD-Editor to find MEID's (3). Corrected them, but still can't write to EVO using QXDM? I am assuming this is why data isn't working? I am running Android2.2 Baseband 2.15.00.11.19
Click to expand...
Click to collapse
Your data isn't working because you don't have the AAA password. The meid doesn't matter because the evo uses the ESN. Get the AAA password and you'll be set.
weinerwad3000 said:
Your data isn't working because you don't have the AAA password. The meid doesn't matter because the evo uses the ESN. Get the AAA password and you'll be set.
Click to expand...
Click to collapse
How do I get the AAA password?
Has anyone had any luck getting data working with an Epic on Virgin Mobile USA? I got voice and text working, using my old Intercept as a donor phone (I care not for MMS and voicemail), but try as I might, I just can't seem to get data going.
One thing of note is the howto I read that said to run requestnvitemread ds_mip_ss_user_prof in QXDM, then run requestnvitemread ds_mip_ss_user_prof 1. When I ran it the first time, the AAA SS was blank, and the second time it wasn't. Mean anything? Also, the length states that the HA is 7 hex digits long, but the 7th is blank. Do I put that in QPST?
Any help would be very greatly appreciated.
Hi Guys,
So I am trying to manually write the HA-Shared and AAA Password keys via QPST to a Sprint phone on Verizon (specifically Page Plus or Straight Talk). Unfortunately, though I have stable 3G (somewhat) and the icon is 3G, I am in fact getting the 1X data speeds.
With all the PPP and etc settings being right, I think it's the fact that I am not entering/writing the HA Shared and AAA passwords, CORRECTLY to the Sprint phone. I read these HA and AAA password through a Verizon phone that is active on the account and fetches 3G speeds, perfectly.
Question being, does anyone happen to know the EXACT way of writing the HA and AAA password, MANUALLY for data provisioning on Verizon (specifically, Page Plus or Straight Talk?). I am thinking and looking for like EXACT LENGTHS, and any other helpful information to be written in HEX format via QPST.
I read these HA and AAA keys via QXDM, and they each fetched back around 15 lines of data with 2 HEX values on line...
Any help would be appreciated, thank you!
Hey guys i really need your help. so i bought an htc evo 4g flashed to boost. it was on a different number and i had a boost account so 2 weeks into it i finally got my number on it. now 3g internet is not working at all i did all the trouble shooting but found that the ha/aaa passwords say both of them are incorrect or something please help ive been bs'ing with this phone for 2 months please help i always give thanks
what kind of donor phone do you have? i had the incognito i had the same problem until i dumped the nvitems 465, 466,1192, and 1194 from the incognito with cdma workshop and flash those nvitems to your evo.Those nvitems containe your aaa ha passwords.Flash those one at a time be warned i am not resposible if you mess up your phone if you flash the wrong nvitems to it. make sure you are on radio version 2.15.00.11.19 if it has anything to do with nvitems.. i dont know.
i dont haqve the doner phone
You will never get 3g to work with out those ha and AAA passwords from the donor phone
Sent from my PC36100 using XDA App