Related
Hi, With my old TP1, I had no problems with ICS. I just got a TP2 yesterday, it's a refurb, so when I followed boo boo's tutorial on ICS with USB, under "network connection", I still get <none>, and can't choose the provider. I hard resetted, followed step by step, and still the same result. Anyone has any clue as what might be the problem? Thanks in advance
This worked for me, No need for cab or registry editor. I didn't write this and cant remember who did. Tried to find the post but couldn't. So who ever did write this THANKS because it worked for me.
Instead of hacking the registry, the phone is just set to use the AT&T ISP connection. Go into Internet Sharing, select Menu, Connection Settings, select Manage existing connections under AT&T ISP. On the next screen AT&T ISP GPRS should already be selected, tap edit.select next. The Access point name (APN) will say isp.cingular, this is the official tethering APN, change it to wap.cingular (the APN for phone internet browsing). select next. make sure user name, password, and domain are all cleared out, then select finish. Now go back to Internet sharing and all should be well. This will erase information needed to officially tether, but if you're doing this then you didn't intend to pay for it anyway. If you ever do need the username and password again, you should be able to obtain it via a simple google search or by calling customer service.
My posts are completely informational/educational. I bear NO responsibility for anyone messing up their phones or for anyone stealing (tethering without paying for it) from at&t Mobility.
sorry for the long post, just wanted to be detailed.
So, Got a sprint EVO for cheap. Sprint had the ESN flagged on sprint network because the owner of the phone's account hasn't been paid. Sold the phone to me, I restored it to factory default, running latest stock 2.2.
Steps taken to get to where I am now:
Used CDMA workshop (licensed 3.5.5) to read the SPC code, rewrote the spc code to 000000. I put an Alltel PRL file on the sd card, same one as my mother's Alltel Hero. Rooted the phone using revoked windows app, replaced the EPST.apk with the older version to allow ##775# (prl change), applied my PRL. Activated the phone on alltel, no problem at all getting it activated.
Call text working great... THEN... using CDMA Workshop, in the EVDO tab (similar function in QPST would be the PPP tab) and entered the HDR user name/pass, in alltel's case, UM is [email protected]/alltel and AN is [email protected]/HEXESN. Set under M.IP to have Simple IP only (read that this will fix the "data call failure" errors) Set profile 0 as active and changed the values to what looks to be the same from the Alltel Hero of my mothers only with my cell number in the fields. Set all nam values such as channels, MCC, etc.. correct, flashed. I then edited the telephony.db to alltel's MMS settings.
Phone's current state, what works, what doesnt..
3G is working great, MMS works perfectly, calling is perfect, SMS is perfect...
1X doesn't work AT ALL:
if I enter an area i KNOW 3G doesn't exist, it doesnt switch to 1X like my eris that i programmed to alltel did, just drops data completely if there's no 3G...
I don't seem to get the Data Call Failure message much at all up until I try to run the "wireless tether" app, it pops up like CRAZY and 3G disconnects every time it pops up.
Phone says I'm roaming constantly, I know I have the latest smartphone PRL for my area and MCC codes etc in the nam are set EXACT to my mothers htc alltel hero and hers doesnt report roaming at all... what gives??? Maybe this is the cause of all my problems...
##DEBUG# screen > EVDO, at the bottom, says AUTHENTICATED and I have an IP address, stays solid like that in a 3g area.
Anyone like to help me out? What values do I may have incorrect for 1X to entirely not work at all but 3G works just fine??.. Being that 1X doesnt work, it seems to cause issues sometimes initializing a connection because it seems like 3G goes dormant/sleep after a while and maybe relies on 1X to be connected to keep a constant connection to the network. And.. this whole Data call failure thing is just obnoxious? Anyone truly find the result to this? Obviously has something to do with sprint, 4G is turned off, all the sprint .APK's are removed.
Being that the phone still has sprint options in Mobile Network Settings such as "Roaming" "Data roaming" etc.. could this be causing problems? How do I go about removing ALL of sprints network options on this phone???
thanks a whole lot... excited to see this phone working on the alltel network, would like to press on and get it working flawlessly.
Hey Steve I remember you from over at HoFo. Your Eris info helped me out getting some of my own issues worked out. I am still interested in what work you did to get your mms working in and out. I looked at the telephony.db once but didn't place a lot of effort in to it. So as it stands I get incoming but unable to send mms. So any insight from you would be greatly appreciated. But I will try and see if I can help you with what you have going on.
First I found that programming the Evo was more of a pain than when I did the HTC DInc on Alltel. In my area PRL 31005 is pushed to Alltel smart phones. It is the same PRL I used on the DInc with no issues. The Evo would insist that I was roaming with it. I switched to a non-divested PRL(30057) and haven't had an issue since. Google "answerman prl" for the download for Alltel PRLs. I have rocked with that PRL for over 3 months now. My roaming option is set for automatic in the mobile network settings and the only other thing I have checked there is data roaming, which I can disable with no problem.
Now if you go back to your HoFo thread I wrote that when I got the Evo I only had 1X data. It wasn't until after I went back over your thread and some other stuff that I managed to get 3G working. I used CDMA workshop(3.6.0 Licenced) And wrote the same things as you did. Only I have Mobile + Simple IP set and profile 1. Now I will say this. First I tried to set to profile 0 but when going into ##DATA#, the phone would always insist it wanted to use profile 1 even after having previously writing the data. So I created another profile in CDMA workshop, duplicated the data I had for 0 and made 1 active instead of 0. I had also previously never had issues with the "Data call failure" until the past month or two. After I rooted and moved from the stock rom I used CM6 for a good while even flashing nightlies and never had a problem. I only moved back to a Sense based rom when I was trying to troubleshoot an issue where my data would disconnect and would not re-establish for several minutes or until after a reboot. I was using juice defender at the time and incidently this was also around the time I updated my radio/PRI etc. So when I went to a random Sense rom this error message threw me off and I was sure something was wrong with the phone. But I have seen plenty of posts about it so idk. I run Myn's Warm 2.2 now. On rls1 I would get the DCF's frequently but not so much on rls 2, maybe once in a blue moon. I don't use juice defender anymore and I have also stopped using Set CPU as it conflicts with my current kernel anyway. *shrug* So no idea what truely makes the phone happy and not give me that error as much.
Hope this helps you.
Wow, that was a MESSAGE.
Thanks a whole lot for that.
For MMS:
When I use anycut to access the APN's on my Evo it shows it shows no apn's at all. I didn't add any and left it alone. Now...
I have attached the telephony.db file I edited with Root Explorer and SQL Lite editor. If you open the file in the editor, you'll see what I changed... It was simply an APN specifically for MMS use, changed it to alltel's values and.. BAM, perfect MMS.
Path:
/data/data/com.android./providers/telephony/databases/
Permissions are to be set to
USER: READ CHECKED - WRITE CHECKED
GROUP: READ CHECKED - WRITE CHECKED
No other's checked.
After replacing the telephony.db file, no reboot required, you should be set to send and receive MMS without any issues at all. If it fails, restart the phone or force quit messages and relaunch.
I will try that PRL you mentioned above, I am also on 31005... reports as the same PRL on my mother's alltel hero though, hmm.. doesn't make sense of why my phone still says I'm roaming.
I will also play with cloning profile 0 and profile 1 and switch back to sim+mobile IP mode...
Thread moved to Q&A.
Thanks I will give this a roll when I get home this evening. I hope that some of what I've given you will be helpful. I've been enjoying the phone and I will enjoy it even more I know once I get the MMS thing cleared up. Keep me up to date on what's going on.
Played with everything, did exactly as you said, still no 1X, if I go to ##data and tell it to use CDMA only (turn EVDO off), it just goes to no data at all while my Eris would just stick to 1x in that mode.
odd.
Can someone explain WHAT it is that allows a handset to receive the HA/AAA shared keys when a *228 activation is requested?
We all know that taking for example a Sprint phone and applying an alltel PRL to the radio ... that when activating it WILL NOT receive the HA/AAA keys for data...
Is it the AKEY ? Is it something else in the memory?
An old PPC6800 I have that was SPRINT.. it was a bugger getting data to work, just would NOT receive the HA/AAA keys or anything when *228ing the phone, as soon as I applied the Alltel Rom with the Alltel NV items, it activated without an issue and received all the correct NV items for data and all, worked perfect. How can we do this with the latest smartphone?...
Is it possible I can clone the NV items from my mother's HTC Alltel Hero and write them to my sprint Evo ?
What do you guys think?
Steve check your PM
I never had to do this myself so don't know how applicable it is.
I installed the file and assigned the permissions, now app just blows up when I try to send a pic msg. Any ideas?
STRANGE !
What messaging app are you using?
I am running stock latest OTA... So all the stock apps are installed, minus all the sprint stuff and a few other htc pre-loaded software I have taken out with root explorer.
Should be working perfectly. I have no idea what the deal is.
Did you go to Messages>menu>settings>connection settings and see if the values have changed?
I use Chomp SMS but it did the same with the native messaging app as well.
That's really strange. MMS still online and working flawlessly for me on alltel.
Phone still says I'm roaming though. Mother's HTC Alltel Hero in the same town is not roaming, both flashed with the same PRL and the NAM info looks identical in cdma workshop.
You sure your APN lists are empty? Mine is, no APN's at all in the APN viewer.
To start, I AM searching and trying to find any and all information that could possibly help me out.
I rooted using unrevoked. Used Calk's rom, switched to netarchy-toastmod-4.3.1-cfs-havs-nosbc-universal-signed, made several nandroid backups (one including the RSA keys, although the backup made when using unrevoked made one of the RSA keys also), tried Ava-Froyo, went back to Calk's. Also tried the PRL hack.
Im new to all this but am fairly technically inclined and understand, so I think, these processes. Of course Im still learning obviously...
....cause somewhere along the line I lost the ability to get incoming calls !!!!!!!
I can still make calls (my number comes up on caller ID correct), send texts, use the net, email, and use wifi tether.
When i make a call it triggers something cause all my texts, mail, and voicemails come streaming in all at once.??????
Im at my wits end, and probably will be up all night trying to fix it.
I found some values in my advanced settings after dialing ##3282# that were different and wonder if thats the problem.
if someone will post me their info from the ##3282# screens (off course omit your phone number under advanced) that would be awesome !!!
S is still showing off.
I have gone back to:
RUU_SuperSonic_S_Sprint_WWE_3.26.651.6_Radio_2.15.00.07.28_NV_1.40_release_140444_signed
and then:
RUU_Supersonic_1.47.651.1_Radio_2.05.00.06.10_release_CL195459
and then the over the air update to 2.2
still not working....
I really dont want to go to the friggin Sprint store....
And any other advice where to steer my searching and efforts would be greatly appreciated !!!!!
Did you mess with your evdo settings from the settings: networks: mobile networks settings screen?
do ##3282#, under evdo, does it say automatic, or something else?
evdo settings
I will list what my phone is set at.
just answer/values
DATA PROFILE:
1
(name)@sprintpcs.com
4D2
4D2
enable
0.0.0.0
255.255.255.255
68.28.89.76
******
******
https://dsa.spcsdns.net:443/dsa/
EVDO:
disable
HDR only
ADVANCED:
(##############)
IS-2000(6)
58
enable
2
310
00
(ph# (not mine though))
9
enable
disable
evrc
voice 13k
<not available> -- LBS PDE IP
<not available> -- LBS PDE PORT
enable
enable
enable
disable
(####)/(#####)
http:/mms.sprintpcs.com
554
rtsp.vog.sprintpcs.com
8085
pd.vog.sprintpcs.com
WIMAX:
10
30
##E#D####A##@sprintpcs.com
(name)@sprintpcs.com
sprintpcs.com
2647000,2657000,2667000
10,10,10
000002
000004
1
120
10
-89
4
300
2
2
0
0
enable
disable
USB CHARGING unchecked
Flash evio 2 1.80 back on
Go into the network settings and select AUTOMATIC for the evdo mode.
EVDO:
disable
HDR only
Click to expand...
Click to collapse
HDR is what's preventing you from receiving calls. After you make the above change, go back into ##3282# and confirm that evdo is set to "automatic"
These network settings carry over regardless of rom's. You can flash til you're blue in the face, problem won't go away
Edit:
8085
pd.vog.sprintpcs.com
Click to expand...
Click to collapse
You may want to delete that so your streaming works without hiccups.
It needs to be set to auto or hybrid.
Sent from my (insert daily ROM name here) Evo 4g
ok, getting incoming calls now.
i switched to automatic under evdo and also in the advanced settings changed the phone number to my actual phone number and this time hit menu>commit changes.
yeah, now to check everything else!!!!
didnt know about the commit changes thing, i was wondering why nothing changed when i edited them.
also under settings>system updates i updated PRL and PROFILE after this.
crossing fingers!!!!
Thank God for nan back ups, now i can reroot and be back in business in no time !!!!!
BACK TO LOVING THE EVO LOL
Thanks for chiming in !!!!!!!
Glad it worked.
This post defines it a bit more - http://forum.xda-developers.com/showpost.php?p=11426299&postcount=8879
Operation Mode = ##3282# > EVDO
Hybrid = Automatic
EVDO-Only = HDR
1X-Only = CDMA
Click to expand...
Click to collapse
???????
ok, now im stumped!
something keeps changing my friggin phone number in my advanced settings in ##3282#
i can change it, commit the change, update profile and everything will be fine and work (get calls).
but then when i reboot it will switch back !!!!
i havent installed, to my knowledge, any rogue crap.
what in the blazes could be causing this???
Are you changing it in ##3282#, or in the network settings that evio 2 1.80 gives access to?
Try changing in network settings, not in ##3282#.
Also, if you want, there is an option in ##3282# to completely wipe the settings. I can't remember which heading it's under, but you need to hit menu and it'll say something like reset settings, or reset something.
I had a simular issue. Unroot the phone flash the ruu then OTA then call sprint tech suppeort and ask them hard resset your phone. It helped me. should help you to. here is how 2 unroot
http://forum.xda-developers.com/showthread.php?t=780141&highlight=unroot
Seems like an awful lot of work to fix this.. I'd exhaust other possibilities before going through all this trouble.
My phone is done. My phone wouldn't call or text earlier so i did a reset on the ##768# screen or whatever so it would run hands free activation again. It failed out. Erased all of my data from the epst screen. Can anyone help? Phone will not connect to data
abdabbs said:
ok, now im stumped!
something keeps changing my friggin phone number in my advanced settings in ##3282#
i can change it, commit the change, update profile and everything will be fine and work (get calls).
but then when i reboot it will switch back !!!!
i havent installed, to my knowledge, any rogue crap.
what in the blazes could be causing this???
Click to expand...
Click to collapse
Did you happen to have your number ported over from another carrier when you got your Evo?
Yes, it was ported. But the number listed in there wasnt the old number. Anyway my phone has been working now, with that old number in it...so...
The only thing is that when on data network it show 'EvDo' all the time, never '3G'. Is this a problem? I have been tring to read up on it and it seems fine, but everyone else's Evo's here seem to show 3G.
Im still trying to locate the original settings so I can compare exactly what I see when I do the ##3282#.
Thanks again for you help!
Well, first off, if you don't know, Revol Wireless is a small local company in my area.
It's very similar to Cricket.
I've gotten everything else to work on the phone.
I put in the Internet/WEP settings with QPST with everything sticking even through a rom change.
But, the problem is, when I change the default Sprint APN to Revols settings for MMS, it works. But, when I reboot it doesn't.
When I go back and look at the APN, it's exactly the same.
I even went into programming (##3282#) and made sure everything was correct.
Since I'm new I can't post links, but the forum I'm using to get the Revol information on, works fine on the Droid X and other Android phones.
Another weird thing I noticed, is that whenever you change the mnc to 00, the APN doesn't show up. It's still there, as you can browse it via APN Manager, but when you use voice dial to open APN, it's hidden.
At first, I thought that was the problem, but even when leaving the mnc to the default Sprint settings, it still only works until I reboot.
Also, the only way to get MMS working again, is for me to put a flash with a new ROM, and once I reboot, it doesn't work again.
I'm sure the settings are correct, because when using them on a Droid X they work fine.
Any advice, or suggestions would be appreciated.
I have a guide. I dont know if this will help.
I used APN Restore and Backup
Guide:
http://z4cellforums.webs.com/apps/forums/topics/show/4779949-fully-flash-android-phone-over-to-revol
All in one torrent:
http://z4cellforums.webs.com/Revol%2...ng.rar.torrent
Esn Cloning is illegal. Do not ask how to clone.
Have a side Revol store do that.
veris said:
Well, first off, if you don't know, Revol Wireless is a small local company in my area.
It's very similar to Cricket.
I've gotten everything else to work on the phone.
I put in the Internet/WEP settings with QPST with everything sticking even through a rom change.
But, the problem is, when I change the default Sprint APN to Revols settings for MMS, it works. But, when I reboot it doesn't.
When I go back and look at the APN, it's exactly the same.
I even went into programming (##3282#) and made sure everything was correct.
Since I'm new I can't post links, but the forum I'm using to get the Revol information on, works fine on the Droid X and other Android phones.
Another weird thing I noticed, is that whenever you change the mnc to 00, the APN doesn't show up. It's still there, as you can browse it via APN Manager, but when you use voice dial to open APN, it's hidden.
At first, I thought that was the problem, but even when leaving the mnc to the default Sprint settings, it still only works until I reboot.
Also, the only way to get MMS working again, is for me to put a flash with a new ROM, and once I reboot, it doesn't work again.
I'm sure the settings are correct, because when using them on a Droid X they work fine.
Any advice, or suggestions would be appreciated.
Click to expand...
Click to collapse
Try using a 3rd party sms app like go sms. it allows you to change the apn just for mms settings. I heard it worked for some issues like this
veris said:
Well, first off, if you don't know, Revol Wireless is a small local company in my area.
It's very similar to Cricket.
I've gotten everything else to work on the phone.
I put in the Internet/WEP settings with QPST with everything sticking even through a rom change.
But, the problem is, when I change the default Sprint APN to Revols settings for MMS, it works. But, when I reboot it doesn't.
When I go back and look at the APN, it's exactly the same.
I even went into programming (##3282#) and made sure everything was correct.
Since I'm new I can't post links, but the forum I'm using to get the Revol information on, works fine on the Droid X and other Android phones.
Another weird thing I noticed, is that whenever you change the mnc to 00, the APN doesn't show up. It's still there, as you can browse it via APN Manager, but when you use voice dial to open APN, it's hidden.
At first, I thought that was the problem, but even when leaving the mnc to the default Sprint settings, it still only works until I reboot.
Also, the only way to get MMS working again, is for me to put a flash with a new ROM, and once I reboot, it doesn't work again.
I'm sure the settings are correct, because when using them on a Droid X they work fine.
Any advice, or suggestions would be appreciated.
Click to expand...
Click to collapse
Change it in the etc/apnsconf.XML file. All the numbers align with what you change in the program, so you just have to figure out what they mean. Compare the sprint ones on boot to the XML file then change the XML file accordingly for revol. You'll need to do this then put it in the zip and reflash. And you will need to do this each time you change roms even if you upgrade the same rom.
Sent from my GT-P7510 using Tapatalk 2
Good Morning.
(Really) Hoping I can get some help here and this doesn't wind up another dead-end thread that people look at once and pass on...
I am attempting to attach this phone to a lab setup using my own WiMAX base station.. The rub is my Radius is configured to do TTLS authentication. The default WiMAX setting in the phone is TLS and it does not appear to be edit-able even after entering the MSL.
Is there a hidden menu where I can change the device to allow TTLS vs. TLS.. Or alternatively, where can I overwrite the default x.509 cert with my own x.509 client cert so I can perform TLS authentication against my own AAA?
My other option is using the Motorola Photon Q, but again I'm running into the same issue on that phone, Locked to TLS with no option to edit...
Thanks,
-Adam
overturfa said:
Good Morning.
(Really) Hoping I can get some help here and this doesn't wind up another dead-end thread that people look at once and pass on...
I am attempting to attach this phone to a lab setup using my own WiMAX base station.. The rub is my Radius is configured to do TTLS authentication. The default WiMAX setting in the phone is TLS and it does not appear to be edit-able even after entering the MSL.
Is there a hidden menu where I can change the device to allow TTLS vs. TLS.. Or alternatively, where can I overwrite the default x.509 cert with my own x.509 client cert so I can perform TLS authentication against my own AAA?
My other option is using the Motorola Photon Q, but again I'm running into the same issue on that phone, Locked to TLS with no option to edit...
Thanks,
-Adam
Click to expand...
Click to collapse
Anyone? Anyone at all?
To get to the Menu you want go to the Dial pad, and type ##3282# . It will ask you EDIT, or View. You want EDIT. It will then prompt you for your MSL. It's a six digit Password. Enter the Password. Then choose WIMAX. The settings to Enable, or Disable TTLS / TLS are there. If you do not have your MSL, you can download MSL Reader from the Play Store.