Well, first off, if you don't know, Revol Wireless is a small local company in my area.
It's very similar to Cricket.
I've gotten everything else to work on the phone.
I put in the Internet/WEP settings with QPST with everything sticking even through a rom change.
But, the problem is, when I change the default Sprint APN to Revols settings for MMS, it works. But, when I reboot it doesn't.
When I go back and look at the APN, it's exactly the same.
I even went into programming (##3282#) and made sure everything was correct.
Since I'm new I can't post links, but the forum I'm using to get the Revol information on, works fine on the Droid X and other Android phones.
Another weird thing I noticed, is that whenever you change the mnc to 00, the APN doesn't show up. It's still there, as you can browse it via APN Manager, but when you use voice dial to open APN, it's hidden.
At first, I thought that was the problem, but even when leaving the mnc to the default Sprint settings, it still only works until I reboot.
Also, the only way to get MMS working again, is for me to put a flash with a new ROM, and once I reboot, it doesn't work again.
I'm sure the settings are correct, because when using them on a Droid X they work fine.
Any advice, or suggestions would be appreciated.
I have a guide. I dont know if this will help.
I used APN Restore and Backup
Guide:
http://z4cellforums.webs.com/apps/forums/topics/show/4779949-fully-flash-android-phone-over-to-revol
All in one torrent:
http://z4cellforums.webs.com/Revol%2...ng.rar.torrent
Esn Cloning is illegal. Do not ask how to clone.
Have a side Revol store do that.
veris said:
Well, first off, if you don't know, Revol Wireless is a small local company in my area.
It's very similar to Cricket.
I've gotten everything else to work on the phone.
I put in the Internet/WEP settings with QPST with everything sticking even through a rom change.
But, the problem is, when I change the default Sprint APN to Revols settings for MMS, it works. But, when I reboot it doesn't.
When I go back and look at the APN, it's exactly the same.
I even went into programming (##3282#) and made sure everything was correct.
Since I'm new I can't post links, but the forum I'm using to get the Revol information on, works fine on the Droid X and other Android phones.
Another weird thing I noticed, is that whenever you change the mnc to 00, the APN doesn't show up. It's still there, as you can browse it via APN Manager, but when you use voice dial to open APN, it's hidden.
At first, I thought that was the problem, but even when leaving the mnc to the default Sprint settings, it still only works until I reboot.
Also, the only way to get MMS working again, is for me to put a flash with a new ROM, and once I reboot, it doesn't work again.
I'm sure the settings are correct, because when using them on a Droid X they work fine.
Any advice, or suggestions would be appreciated.
Click to expand...
Click to collapse
Try using a 3rd party sms app like go sms. it allows you to change the apn just for mms settings. I heard it worked for some issues like this
veris said:
Well, first off, if you don't know, Revol Wireless is a small local company in my area.
It's very similar to Cricket.
I've gotten everything else to work on the phone.
I put in the Internet/WEP settings with QPST with everything sticking even through a rom change.
But, the problem is, when I change the default Sprint APN to Revols settings for MMS, it works. But, when I reboot it doesn't.
When I go back and look at the APN, it's exactly the same.
I even went into programming (##3282#) and made sure everything was correct.
Since I'm new I can't post links, but the forum I'm using to get the Revol information on, works fine on the Droid X and other Android phones.
Another weird thing I noticed, is that whenever you change the mnc to 00, the APN doesn't show up. It's still there, as you can browse it via APN Manager, but when you use voice dial to open APN, it's hidden.
At first, I thought that was the problem, but even when leaving the mnc to the default Sprint settings, it still only works until I reboot.
Also, the only way to get MMS working again, is for me to put a flash with a new ROM, and once I reboot, it doesn't work again.
I'm sure the settings are correct, because when using them on a Droid X they work fine.
Any advice, or suggestions would be appreciated.
Click to expand...
Click to collapse
Change it in the etc/apnsconf.XML file. All the numbers align with what you change in the program, so you just have to figure out what they mean. Compare the sprint ones on boot to the XML file then change the XML file accordingly for revol. You'll need to do this then put it in the zip and reflash. And you will need to do this each time you change roms even if you upgrade the same rom.
Sent from my GT-P7510 using Tapatalk 2
Related
So, Got a sprint EVO for cheap. Sprint had the ESN flagged on sprint network because the owner of the phone's account hasn't been paid. Sold the phone to me, I restored it to factory default, running latest stock 2.2.
Steps taken to get to where I am now:
Used CDMA workshop (licensed 3.5.5) to read the SPC code, rewrote the spc code to 000000. I put an Alltel PRL file on the sd card, same one as my mother's Alltel Hero. Rooted the phone using revoked windows app, replaced the EPST.apk with the older version to allow ##775# (prl change), applied my PRL. Activated the phone on alltel, no problem at all getting it activated.
Call text working great... THEN... using CDMA Workshop, in the EVDO tab (similar function in QPST would be the PPP tab) and entered the HDR user name/pass, in alltel's case, UM is [email protected]/alltel and AN is [email protected]/HEXESN. Set under M.IP to have Simple IP only (read that this will fix the "data call failure" errors) Set profile 0 as active and changed the values to what looks to be the same from the Alltel Hero of my mothers only with my cell number in the fields. Set all nam values such as channels, MCC, etc.. correct, flashed. I then edited the telephony.db to alltel's MMS settings.
Phone's current state, what works, what doesnt..
3G is working great, MMS works perfectly, calling is perfect, SMS is perfect...
1X doesn't work AT ALL:
if I enter an area i KNOW 3G doesn't exist, it doesnt switch to 1X like my eris that i programmed to alltel did, just drops data completely if there's no 3G...
I don't seem to get the Data Call Failure message much at all up until I try to run the "wireless tether" app, it pops up like CRAZY and 3G disconnects every time it pops up.
Phone says I'm roaming constantly, I know I have the latest smartphone PRL for my area and MCC codes etc in the nam are set EXACT to my mothers htc alltel hero and hers doesnt report roaming at all... what gives??? Maybe this is the cause of all my problems...
##DEBUG# screen > EVDO, at the bottom, says AUTHENTICATED and I have an IP address, stays solid like that in a 3g area.
Anyone like to help me out? What values do I may have incorrect for 1X to entirely not work at all but 3G works just fine??.. Being that 1X doesnt work, it seems to cause issues sometimes initializing a connection because it seems like 3G goes dormant/sleep after a while and maybe relies on 1X to be connected to keep a constant connection to the network. And.. this whole Data call failure thing is just obnoxious? Anyone truly find the result to this? Obviously has something to do with sprint, 4G is turned off, all the sprint .APK's are removed.
Being that the phone still has sprint options in Mobile Network Settings such as "Roaming" "Data roaming" etc.. could this be causing problems? How do I go about removing ALL of sprints network options on this phone???
thanks a whole lot... excited to see this phone working on the alltel network, would like to press on and get it working flawlessly.
Hey Steve I remember you from over at HoFo. Your Eris info helped me out getting some of my own issues worked out. I am still interested in what work you did to get your mms working in and out. I looked at the telephony.db once but didn't place a lot of effort in to it. So as it stands I get incoming but unable to send mms. So any insight from you would be greatly appreciated. But I will try and see if I can help you with what you have going on.
First I found that programming the Evo was more of a pain than when I did the HTC DInc on Alltel. In my area PRL 31005 is pushed to Alltel smart phones. It is the same PRL I used on the DInc with no issues. The Evo would insist that I was roaming with it. I switched to a non-divested PRL(30057) and haven't had an issue since. Google "answerman prl" for the download for Alltel PRLs. I have rocked with that PRL for over 3 months now. My roaming option is set for automatic in the mobile network settings and the only other thing I have checked there is data roaming, which I can disable with no problem.
Now if you go back to your HoFo thread I wrote that when I got the Evo I only had 1X data. It wasn't until after I went back over your thread and some other stuff that I managed to get 3G working. I used CDMA workshop(3.6.0 Licenced) And wrote the same things as you did. Only I have Mobile + Simple IP set and profile 1. Now I will say this. First I tried to set to profile 0 but when going into ##DATA#, the phone would always insist it wanted to use profile 1 even after having previously writing the data. So I created another profile in CDMA workshop, duplicated the data I had for 0 and made 1 active instead of 0. I had also previously never had issues with the "Data call failure" until the past month or two. After I rooted and moved from the stock rom I used CM6 for a good while even flashing nightlies and never had a problem. I only moved back to a Sense based rom when I was trying to troubleshoot an issue where my data would disconnect and would not re-establish for several minutes or until after a reboot. I was using juice defender at the time and incidently this was also around the time I updated my radio/PRI etc. So when I went to a random Sense rom this error message threw me off and I was sure something was wrong with the phone. But I have seen plenty of posts about it so idk. I run Myn's Warm 2.2 now. On rls1 I would get the DCF's frequently but not so much on rls 2, maybe once in a blue moon. I don't use juice defender anymore and I have also stopped using Set CPU as it conflicts with my current kernel anyway. *shrug* So no idea what truely makes the phone happy and not give me that error as much.
Hope this helps you.
Wow, that was a MESSAGE.
Thanks a whole lot for that.
For MMS:
When I use anycut to access the APN's on my Evo it shows it shows no apn's at all. I didn't add any and left it alone. Now...
I have attached the telephony.db file I edited with Root Explorer and SQL Lite editor. If you open the file in the editor, you'll see what I changed... It was simply an APN specifically for MMS use, changed it to alltel's values and.. BAM, perfect MMS.
Path:
/data/data/com.android./providers/telephony/databases/
Permissions are to be set to
USER: READ CHECKED - WRITE CHECKED
GROUP: READ CHECKED - WRITE CHECKED
No other's checked.
After replacing the telephony.db file, no reboot required, you should be set to send and receive MMS without any issues at all. If it fails, restart the phone or force quit messages and relaunch.
I will try that PRL you mentioned above, I am also on 31005... reports as the same PRL on my mother's alltel hero though, hmm.. doesn't make sense of why my phone still says I'm roaming.
I will also play with cloning profile 0 and profile 1 and switch back to sim+mobile IP mode...
Thread moved to Q&A.
Thanks I will give this a roll when I get home this evening. I hope that some of what I've given you will be helpful. I've been enjoying the phone and I will enjoy it even more I know once I get the MMS thing cleared up. Keep me up to date on what's going on.
Played with everything, did exactly as you said, still no 1X, if I go to ##data and tell it to use CDMA only (turn EVDO off), it just goes to no data at all while my Eris would just stick to 1x in that mode.
odd.
Can someone explain WHAT it is that allows a handset to receive the HA/AAA shared keys when a *228 activation is requested?
We all know that taking for example a Sprint phone and applying an alltel PRL to the radio ... that when activating it WILL NOT receive the HA/AAA keys for data...
Is it the AKEY ? Is it something else in the memory?
An old PPC6800 I have that was SPRINT.. it was a bugger getting data to work, just would NOT receive the HA/AAA keys or anything when *228ing the phone, as soon as I applied the Alltel Rom with the Alltel NV items, it activated without an issue and received all the correct NV items for data and all, worked perfect. How can we do this with the latest smartphone?...
Is it possible I can clone the NV items from my mother's HTC Alltel Hero and write them to my sprint Evo ?
What do you guys think?
Steve check your PM
I never had to do this myself so don't know how applicable it is.
I installed the file and assigned the permissions, now app just blows up when I try to send a pic msg. Any ideas?
STRANGE !
What messaging app are you using?
I am running stock latest OTA... So all the stock apps are installed, minus all the sprint stuff and a few other htc pre-loaded software I have taken out with root explorer.
Should be working perfectly. I have no idea what the deal is.
Did you go to Messages>menu>settings>connection settings and see if the values have changed?
I use Chomp SMS but it did the same with the native messaging app as well.
That's really strange. MMS still online and working flawlessly for me on alltel.
Phone still says I'm roaming though. Mother's HTC Alltel Hero in the same town is not roaming, both flashed with the same PRL and the NAM info looks identical in cdma workshop.
You sure your APN lists are empty? Mine is, no APN's at all in the APN viewer.
I have just started a T-Mobile contract in the UK on the Full Monty plan that gives unlimited data and includes tethering.
The handset used is unbranded and unlocked but I couldnt tether with it for some reason, either via wifi hotspot or USB Tether. The internet on the handset worked fine.
I couldnt call 150 customer service as that dept shut at 10pm so had a play with the apn's.
The three APN's set up as default are all locked and uneditable so my plan was to edit the broadband one in someway.
So, I copied all the settings, set up the APN's as another network, deleted them and added the three default APN's manually.
Once I did this, tethering started to work, with no actual change to any of the settings.
Just a heads up if anyone else comes across this and a fix that worked for me.
Steve
Yep rename apn to consumer broadband, people with many HTC s will known this, glad you figured it out
Sent from my Transformer Prime TF201 using xda premium
Tomo1971 said:
So, I copied all the settings, set up the APN's as another network, deleted them and added the three default APN's manually.
Click to expand...
Click to collapse
Many thanks for this post. Would you mind expanding / elaborating on the above steps at all? Not sure how to do this. Have tried creating new APNs with the same settings with no luck. Any pointers much appreciated, thanks.
Roosell said:
Many thanks for this post. Would you mind expanding / elaborating on the above steps at all? Not sure how to do this. Have tried creating new APNs with the same settings with no luck. Any pointers much appreciated, thanks.
Click to expand...
Click to collapse
Yeah - I'd like easier steps too listed please - and thanks for sharing!
I made a mistake in my original post.
Seems that what was happening is that I was using the T-mobile Orange signal and not been able to tether. After messing with the APN's the phone went back to T-Mobile and so started to work. Nothing to do with the messing with the APN's
But, what does seem to work, is to re-create the APN's as they were, but on the first entry, change APN type from 'default,hipri' to 'default,hipri,dun'
That works on T-Mobile and when roaming onto Orange it seems
To do this, copy the info from all three APN's and then with the APN screen open, select menu and then 'reset to default'
This deletes the APN's and then gives you the choice of carrier to use. I used Virgin I think (doesnt matter which you use) but once the new APN(s) are there, just delete them. Then, menu and add APN.
Set up each of the APN's as they were before, except the above change (adding dun to the Apn type)
Tomo1971 said:
I made a mistake in my original post.
Seems that what was happening is that I was using the T-mobile Orange signal and not been able to tether. After messing with the APN's the phone went back to T-Mobile and so started to work. Nothing to do with the messing with the APN's
But, what does seem to work, is to re-create the APN's as they were, but on the first entry, change APN type from 'default,hipri' to 'default,hipri,dun'
That works on T-Mobile and when roaming onto Orange it seems
To do this, copy the info from all three APN's and then with the APN screen open, select menu and then 'reset to default'
This deletes the APN's and then gives you the choice of carrier to use. I used Virgin I think (doesnt matter which you use) but once the new APN(s) are there, just delete them. Then, menu and add APN.
Set up each of the APN's as they were before, except the above change (adding dun to the Apn type)
Click to expand...
Click to collapse
Smashing thanks. Tethering working fine now on T-Mo only, will try the solution you suggest for T-Mo/Orange when I get a chance. Much appreciated!
I don't have any problems tethering whilst on Orange on Android handsets. I'm not on Full Monty though, if that makes any difference. It is impossible to tether on an iPhone whilst on T-MobileOrange though. The hotspot option is just greyed out. As soon as you switch back to TMobile you get the option to switch it on again. Orange 3G is utter crap anyway. Unfortunately I pretty much roam onto it whether I like it or not at my new address.
as usual i'm stumbling at the first block...
'copy the info from all three APN's'...
when i click on any of them all the settings are greyed out, i wonder what i'm doing wrong?
edit:
sussed and working fine now
Just about to do this.
Out of curiosity what is the Broadband APN for??
Is it a tethering only APN? e.g. Now tethering is removed from NEW Full Monty contract connections (of which i have one) If i tether, thus using that APN, will they be able to see that and have a go.
Or now tethering is removed will that APN not work?
James
parkenator said:
Just about to do this.
Out of curiosity what is the Broadband APN for??
Is it a tethering only APN? e.g. Now tethering is removed from NEW Full Monty contract connections (of which i have one) If i tether, thus using that APN, will they be able to see that and have a go.
Or now tethering is removed will that APN not work?
James
Click to expand...
Click to collapse
I reckon tethering will work…. but will get charged…. and its likely to be expensive.
Seems a strange decision on TMO's part TBH, as they share part of the backhaul with 3 UK you would think that they could cope with extra bandwidth needed.
I assume the broadband APN is for tethering but as I say, if used then it will be billed. Just cos the handset/set up can do it, doesnt meant it wont go past the billing systems.
Steve
Hi all,
I'm having a lot of trouble the past 2 weeks or so with my galaxy s3. For some reason the phone refuses to work on 3g/LTE. I've tried flashing several roms, including official roms, and still no help. Any suggestions other than sending my phone in for repairs?
thanks.
Have you tried putting in the right APNs?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Yes I have, the APNs already in the phone are the default one's but I tried to put LTE specific apns to no avail.
here is the settings taken directly off the Fido website
APN Settings:
APN: Fido-core-appl1.apn
If you have a LTE device, use the following setting: LTEMOBILE.APN
MMS (Picture & Video Messaging Settings):
MMSC: http://mms.fido.ca
MMS Proxy: 205.151.11.13
MMS Port: 80
Leave the following fields blank: Proxy, Port, User Name, Password, Server
Press the options button on your device, tap on Save in order to save the APN settings.
Open the Internet browser icon on your device and start browsing. There are occasions where restarting your device is needed before it can browse. If you cannot connect to the Internet, restart the phone and try browsing the Internet again.
NOTE: The created APN will show up on the APNs screen. To activate the APN, tap on the radio button located in front of APN.
Is your IMEI still there?
have you check that network mode is well selected on GSM/HSPA/LTE?
Bmmaximus said:
Hi all,
I'm having a lot of trouble the past 2 weeks or so with my galaxy s3. For some reason the phone refuses to work on 3g/LTE. I've tried flashing several roms, including official roms, and still no help. Any suggestions other than sending my phone in for repairs?
thanks.
Click to expand...
Click to collapse
IMEI is gone
what does that mean?
The LPT said:
here is the settings taken directly off the Fido website
APN Settings:
APN: Fido-core-appl1.apn
If you have a LTE device, use the following setting: LTEMOBILE.APN
MMS (Picture & Video Messaging Settings):
MMSC: http://mms.fido.ca
MMS Proxy: 205.151.11.13
MMS Port: 80
Leave the following fields blank: Proxy, Port, User Name, Password, Server
Press the options button on your device, tap on Save in order to save the APN settings.
Open the Internet browser icon on your device and start browsing. There are occasions where restarting your device is needed before it can browse. If you cannot connect to the Internet, restart the phone and try browsing the Internet again.
NOTE: The created APN will show up on the APNs screen. To activate the APN, tap on the radio button located in front of APN.
Click to expand...
Click to collapse
I tried all of these settings
saj222 said:
Is your IMEI still there?
Click to expand...
Click to collapse
How do I check this? and if it is gone, how do I recover it?
djjc said:
have you check that network mode is well selected on GSM/HSPA/LTE?
Click to expand...
Click to collapse
Yes, tried several times messing with these settings, did nothing.
Bmmaximus said:
I tried all of these settings
How do I check this? and if it is gone, how do I recover it?
Click to expand...
Click to collapse
Check: settings>about>status
The original imei backup/recover thread had vanished for some reason. I think this thread is a copy http://rootzwiki.com/topic/32397-tutorial-imei-backup-nv-with-qpst-us-variants/
I'm having a Similar Issue on ROGERS; Unable to make any phonecalls. APN is set up correctly; and I checked my IMEI and its in there (Not sure what the numbers are supposed to be, but I'm assuming "IMEI is gone" means NO numbers are showing up, and I have a great many of them there...So I'm kind of at a loss. Phone worked earlier today, been flashing different roms trying to find a good TW one I liked (Coming from Task650). I had to revert to stock because I couldnt get LTE after going from AOKP to TW, but after I flashed Stock with ODIN, and then returned to trying different TW ROMS my LTE was fine; so I just kept flashing (clean flashes, no dirties)....I'm at a loss, and google searching like mad isn't helping me...
Solved; Flashed Rooted stock rom, and then did another clean Install of the ROM I was using. Seems to have fixed it.
I've been using my XZ2 Compact on Verizon since it was released. No issues. Switched to Total Wireless today, and my internet will not work. Voice and text works fine. Total Wireless operates on Verizon's network. This SIM card works fine when I put it into a Google Pixel.
My APN settings are locked (there is no "+" button). Automatically updating the APN settings adds a Verizon profile that is totally different than the one that automatically popped up on my Pixel. I can delete the existing APN profile, but I cannot add one. I've restarted the phone many times, both while connected to WiFi and not. I get internet back immediately if I reboot with the Verizon SIM.
I've searched around the interwebs, and I cannot find anything. Any help would be appreciated.
jmdale1984 said:
I've been using my XZ2 Compact on Verizon since it was released. No issues. Switched to Total Wireless today, and my internet will not work. Voice and text works fine. Total Wireless operates on Verizon's network. This SIM card works fine when I put it into a Google Pixel.
My APN settings are locked (there is no "+" button). Automatically updating the APN settings adds a Verizon profile that is totally different than the one that automatically popped up on my Pixel. I can delete the existing APN profile, but I cannot add one. I've restarted the phone many times, both while connected to WiFi and not. I get internet back immediately if I reboot with the Verizon SIM.
I've searched around the interwebs, and I cannot find anything. Any help would be appreciated.
Click to expand...
Click to collapse
I use another mvno and the part that's most important is 'apn name' when using an mvno mine has to be set to say reseller... Have you tried pressing download internet settings? That usually fixes the problem and bring back the plus or allow you to manually change the apn setting after it downloads it. Take it you aren't using the dual sim as sometimes switching the Sims around brings back the apn menu.
Thanks for the insight. I have tried downloading settings several times, it just bring back the "VZWINTERNET" APN.
It is a single SIM US model.
I have not tried renaming the APN. That is the one thing I can edit on it.
jmdale1984 said:
Thanks for the insight. I have tried downloading settings several times, it just bring back the "VZWINTERNET" APN.
It is a single SIM US model.
I have not tried renaming the APN. That is the one thing I can edit on it.
Click to expand...
Click to collapse
Does total wireless publish the apn settings? Sometimes ios/android uses slightly different settings. Just look at what apn name should be, and try to match it up..
ehBrY said:
I use another mvno and the part that's most important is 'apn name' when using an mvno mine has to be set to say reseller... Have you tried pressing download internet settings? That usually fixes the problem and bring back the plus or allow you to manually change the apn setting after it downloads it. Take it you aren't using the dual sim as sometimes switching the Sims around brings back the apn menu.
Click to expand...
Click to collapse
I'll try that as soon as I get home, thanks!
I can't believe it! Changing APN Name to "TRACFONE.VZWENTP" is all that was needed. Thanks a bunch!
jmdale1984 said:
I can't believe it! Changing APN Name to "TRACFONE.VZWENTP" is all that was needed. Thanks a bunch!
Click to expand...
Click to collapse
Glad you are up and running! Anytime.
Hi - Never done this before, but I am having problems with MMS using my G8 (LM-G820UM) and hoping someone out there might be able to help. You will have my eternal gratitude. At this point, I would even consider rooting if you think that would help.
The current issue: I mistakenly bought a US/Sprint phone and am in Canada. It appears that cross-flashing on a G8 is verboten, so that's not an option (please correct me if I am wrong - the threads I have read seem to be several months old). Everything seems to work properly, no problem with voice, Internet, and SMS... but I cannot send or receive MMS. My APN appears fine... though I cannot edit it. But here is what makes me scratch my head:
Available network modes are Automatic (what I use), LTE/CDMA, CDMA, GSM/UMTS. If I switch to LTE/CDMA then MMS works fine, but SMS and voice disappear.
So... the solution I've come up with, which *sucks*, is to swap network modes whenever I want to send or receive MMS... which isn't very often, but does come up once a week or so.
I have tried changing to each of the "Preferred Network Type" options within ##4636##, but none of these worked for both SMS and MMS at the same time.
Reading the forums, I found a solution involving ##3282# and performing a "reset"... which appeared promising... but there does not appear to be an edit or reset option when I enter the menu.
Thank you!!
And also... live and learn... one more thing to check/test when I buy a used phone...
You can use google messages it works perfect mms i have a sprint g8 also on movistar carrier from mexico.and i use google messages for the same reason.
mip1977 said:
Hi - Never done this before, but I am having problems with MMS using my G8 (LM-G820UM) and hoping someone out there might be able to help. You will have my eternal gratitude. At this point, I would even consider rooting if you think that would help.
The current issue: I mistakenly bought a US/Sprint phone and am in Canada. It appears that cross-flashing on a G8 is verboten, so that's not an option (please correct me if I am wrong - the threads I have read seem to be several months old). Everything seems to work properly, no problem with voice, Internet, and SMS... but I cannot send or receive MMS. My APN appears fine... though I cannot edit it. But here is what makes me scratch my head:
Available network modes are Automatic (what I use), LTE/CDMA, CDMA, GSM/UMTS. If I switch to LTE/CDMA then MMS works fine, but SMS and voice disappear.
So... the solution I've come up with, which *sucks*, is to swap network modes whenever I want to send or receive MMS... which isn't very often, but does come up once a week or so.
I have tried changing to each of the "Preferred Network Type" options within ##4636##, but none of these worked for both SMS and MMS at the same time.
Reading the forums, I found a solution involving ##3282# and performing a "reset"... which appeared promising... but there does not appear to be an edit or reset option when I enter the menu.
Thank you!!
And also... live and learn... one more thing to check/test when I buy a used phone...
Click to expand...
Click to collapse
I've had the exact same problem, and the reset option within the ##3282# menu is definitely the solution. You have to go to apn settings, view, 3 buttons at top right, and reset. If you had the right sim in of course, mms should now work
antintin said:
I've had the exact same problem, and the reset option within the ##3282# menu is definitely the solution. You have to go to apn settings, view, 3 buttons at top right, and reset. If you had the right sim in of course, mms should now work
Click to expand...
Click to collapse
You are a lifesaver! Yes, that was what I was missing - now everything appears to be working as expected. I believe it was your post in another thread that started me down this path as well, thank you for bringing it full-circle.