Related
HI All,
Hope you can take a look over my setup and help me maximize the space on this phone.
I have rooted, S-off'ed and Followed several guides trying 3 Roms. I like Leedroid best and want to use it going forward. However I keep running out of space after a couple of months and find myself wiping the phone down to start again. despite using the 3.0.8.2 a2sd version of the rom.
I've read posts about this issue suggesting A2SD reintall or terminal emulator fix's but they refer to CM7 and other Roms so I am fearful of trying them out without consulting the experts.
Can anyone see what I'm doing wrong or suggest a new approach I would be willing to wipe everything and start again I.e re-install apps from the market because TB keeps my contact sms etc safe.
I dont know what a2sd leedroid comes packaged with. the "a2sd reinstall" command from terminal is something specific to Dark Tremor a2sd. This can be installed on any rom, so it could be that. This wont break anything if you have any other a2sd solution as these commands wont be programmed into the script.
If it has got Dark tremor, moving dalvik-cache onto sd ext would save space too. the command for that would be "a2sd cachesd"
Hi RootSU, Thanks for your reply. I've downloaded the terminal emulator and tried those commands, doesn't seem to work.
I suppose what I'm trying to Ask is: To run Leedroid what is the optimum configuration to fit the most apps without getting running low message coming up.
Here is the quick sys info which i got too.
LeeDroid ROM does not have the DarkTremor's script - so the a2sd commands won't work. AFAIK, it uses MCRScripts.
There should be an application like that in the ROM with preinstalled scripts.
The last time is used there was and after running the script which moved the dalvik to the SD the problem got solved.
This is the link for the patch:
http://forum.xda-developers.com/showpost.php?p=15732939&postcount=384ton
Yep, just found that add o in the thread:
http://leedroid.ftp.rshost.eu/Bravo_Addons/Move-Dalvik-to-sdext.zip
if you havent done this, it will save a lot of space.
Ok thanks,
I saved that file to SDcard rebooted to recovery and Applied Zip file, It seemed to go well took a while but no errors. Here is a new pic of system info not really much change is there ?
Can you suggest any other checks ?
Not really. may be you already did this? How many apps have you got?
Are you s-off? Maybe try data++ version?
i used to use this rom, now on HD port
can't remember, but i think the A2SD rom already moves the dalvik cache to ext, so flashing that zip won't save anything. you must have a lot of data on internal
to maximise internal storage use the data++ ROM
there is a very good FAQ on how to install it, and more importantly, explains the difference.
since you are already S-OFF, it involves changing hboot to maximise internal memory. then you can move dalvik to ext to have even more...
thanks guys makes sense, Eddie giving this FAQ a go.
Hi,
First i will say thanks for the great rom, i will try it asap (a little bit more stable)
i read about this rom in the topic since it was started .
i have some Questions, it will be my first "clean" Android (without Sense)
There should be a installer after first start of the rom after flash? Where can i found more information about the things i can chose?
Evervolv toolbox, is that an addtional Settings Dialog with more Options or still a app which can be used as "standalone"
(sorry for the bad english)
When you install it you will get some options to choose a launcher and a2sd-script.
On first start you won't get the app to set your g-acc and so on, you'll have to do that in the system settings.
And the Evervolv-Toolbox are additional settings the this rom it's not a standalone app.
Hope this helps
grtz
Please note that Sandvold ICS v. 0.4.2.1 has some stability problems at the moment. Many people experience "black screen of death", device fails to turn on screen after a period of inactivity, battery has to be removed to reboot. I found that raising the minimum CPU speed from 245mhz to 384mhz completely removes this problem. With this small tweak the rom is great! You *should* be able to change this setting with Evervolv toolbox, sadly it does not work. For some reason the toolbox runs with insufficient rights to tweak cpu speed, I did my own scripts to set cpu speed from the console instead.
cheers
/Stig
stig_dk said:
Please note that Sandvold ICS v. 0.4.2.1 has some stability problems at the moment. Many people experience "black screen of death", device fails to turn on screen after a period of inactivity, battery has to be removed to reboot. I found that raising the minimum CPU speed from 245mhz to 384mhz completely removes this problem. With this small tweak the rom is great! You *should* be able to change this setting with Evervolv toolbox, sadly it does not work. For some reason the toolbox runs with insufficient rights to tweak cpu speed, I did my own scripts to set cpu speed from the console instead.
cheers
/Stig
Click to expand...
Click to collapse
Black-screen-issues can be solved by flashing MIUI-kernel:
http://www.miui-au.com/wp-content/plugins/download-monitor/download.php?id=166
Hi! I use ICS since beta 0.3.9 and I'm now updated to 0.4.4
This release seem very stable now. Just remember that the camera preview doesn't work. Also, you might have some problem with MMS.
App space problem
Hello - some help for a newbie please (well Desire newbie)...
I did try reading though Sandvolds thread, and I have tried to remedy, but I don't seem to get much further ....
I am running an ICS beta on my tablet, so I thought it would be interesting to try it on my Desire too. On the tablet there is more memory, so I have never experienced space problems with apps.
I rooted the Desire OK - and flashed 0.4.2.1 ... ran fairly smoothly, but hit space problems when trying to load up some of my favourite apps. I have a 16gb sd card. I downloaded apps2sd from the market - and moved some of the apps. However still not able to update some system apps from the market due to insufficient space (even though there appears to be enough).
Reading the other thread, I have gathered some/little understanding... and so before flashing 0.4.4 I reformatted my SD card from recovery choosing the largest ext4 that I could.
I was then ready to go to try 0.4.4.
On trying the Amarullz script and Nova launcher - I was having lots of lag after boot and I kept getting prompted to enter PIN number and reboot the phone. (I had done a factory wipe and cleared Dalvik after flashing the ROM).
I then reflashed choose Apex launcher, stock Kernal and data2sd option.
I wiped after flashing, did a few waits and reboots - as others recommended this.
Now seems to run quite smoothly, I have added back a bunch of apps via Titanium Backup ... but I don't see any apps 'automatically' being moved to sd card. I have moved as many as I can manually.
But I can also see that I am going to run out of space again soon ....
If I look in the settings at storage I see...
Internal storage - Apps 104MB Available 26.86MB
SD Card - Apps 239MB
Am I doing anything wrong?
Looloup said:
Hello - some help for a newbie please (well Desire newbie)...
I did try reading though Sandvolds thread, and I have tried to remedy, but I don't seem to get much further ....
I am running an ICS beta on my tablet, so I thought it would be interesting to try it on my Desire too. On the tablet there is more memory, so I have never experienced space problems with apps.
I rooted the Desire OK - and flashed 0.4.2.1 ... ran fairly smoothly, but hit space problems when trying to load up some of my favourite apps. I have a 16gb sd card. I downloaded apps2sd from the market - and moved some of the apps. However still not able to update some system apps from the market due to insufficient space (even though there appears to be enough).
Reading the other thread, I have gathered some/little understanding... and so before flashing 0.4.4 I reformatted my SD card from recovery choosing the largest ext4 that I could.
I was then ready to go to try 0.4.4.
On trying the Amarullz script and Nova launcher - I was having lots of lag after boot and I kept getting prompted to enter PIN number and reboot the phone. (I had done a factory wipe and cleared Dalvik after flashing the ROM).
I then reflashed choose Apex launcher, stock Kernal and data2sd option.
I wiped after flashing, did a few waits and reboots - as others recommended this.
Now seems to run quite smoothly, I have added back a bunch of apps via Titanium Backup ... but I don't see any apps 'automatically' being moved to sd card. I have moved as many as I can manually.
But I can also see that I am going to run out of space again soon ....
If I look in the settings at storage I see...
Internal storage - Apps 104MB Available 26.86MB
SD Card - Apps 239MB
Am I doing anything wrong?
Click to expand...
Click to collapse
1). www.revolutionary.io use this
2). www.alpharev.com download cm7r2.img
3). flash the hboot
Code:
fastboot flash hboot hboot.img
4). re-flash 4.4 and choose stock a2sd
5. enable a2sd
Code:
su
a2sd install
#choose settings#
Thanks for quick response..... I have a fee more questions....
I originally rooted my Desire via revolutionary .... do I need to do it again?
I guess I then flash the zip file.
The fastboot command - can I do this from the terminal app?
hi,
fastboot command and adb must be running from computer.
you need to instal sdk android sdk android
if you run revolutionary, u don t need to do once again but to flash an hboot you must be Soffed.
dunno if revolutionary does the job... i used alpharev to do son gain S-offed and able to flash hboot from fastboot command.
I saw the option to install agps in the installer but i chose gps. How can i add the agps when i already installed the rom? Because getting gps fix in navigation is taking way to long, so long that i abort it while trying
Getting closer
@bortak
1. Done OK
2. Done OK
3. Done OK
4. Done ... BUT ... no Gapps, no Terminal app ... not much really not even a keyboard (even after 2 reboots)
- The link to Gapps for CM7r2 no longer works
5. Unable to try this as no Terminal app ... and I can't get ADB working on my PC.
where have my apps gone?
So I can't get cm7r2 to work, so I reflashed hboot back to standard, I then reflashed 0.4.4 choosing stock a2sd. I installed a2sd via terminal and moved cache too. After reboot I installed a bunch of apps .... and eventually ran out of space - as if apps not being moved.
I then rebooted, and all of the apps except the paid apps have gone. I installed a couple of apps from the. Market and they have also gone after reboot.
I turned a2sd off, then I was able to keep apps over a reboot ..... but I would like to get a2sd working.
Any ideas?
For now I am manually moving apps to SD card.
Sorry for this question...
Your 3G, Wifi is working.. My wifi, 3G is not working..
3g (once APN set up) and wifi both working well
Looloup said:
@bortak
1. Done OK
2. Done OK
3. Done OK
4. Done ... BUT ... no Gapps, no Terminal app ... not much really not even a keyboard (even after 2 reboots)
- The link to Gapps for CM7r2 no longer works
5. Unable to try this as no Terminal app ... and I can't get ADB working on my PC.
Click to expand...
Click to collapse
Did you do a wipe after flashing the rom? I had a similar problem when doing that. CWM Recovery also deletes the sd-ext partition, and as on cm7r2 there are also system apps on sd-ext, they are gone.
With the included a2sd apps should be moved to sd-ext automatically. It is not shown on the phone.
How big is your ext4 partition? And did you create it with CWM Recovery? If so, try recreating with gPartEd.
muellersmattes said:
Did you do a wipe after flashing the rom? I had a similar problem when doing that. CWM Recovery also deletes the sd-ext partition, and as on cm7r2 there are also system apps on sd-ext, they are gone.
With the included a2sd apps should be moved to sd-ext automatically. It is not shown on the phone.
How big is your ext4 partition? And did you create it with CWM Recovery? If so, try recreating with gPartEd.
Click to expand...
Click to collapse
This.
10chars
I created the extra partition via CWM recovery - maybe too large as I made it 4gb.
I wiped the device and Dalvik cache after flashing the ROM.
I then set a2sd via terminal and allowed reboot.
I then downloaded apps (or restored via Titanium)
Eventually ran out of space when downloading apps - so they were not being moved.
Apps run OK.
When I did a normal reboot - the apps 'disappeared '.
Reading Bortaks debug guide the only thing I can see that looks relevant is to try reformatting the SC card with 2 primary partitions.
Read what i wrote? Do the following:
1) Recreate the partitions on your sdcard using GParted
2) Do a full wipe BEFORE flashing.
3) Re-flash the rom and select stock a2sd
4) Do NOT wipe again
4) Reboot, start Terminal emulator, set up a2sd
5) See if apps stay
On my first try I selected stock A2SD and set it up as explained using the terminal. (using a 2GB ext3 partition, placed after FAT32)
I rebooted and everything seemed fine, and I installed several apps. After a while, though, I got the "insufficient storage" error whenever I tried to install something. In the application manager the internal memory available had a large negative value.
I then wiped everything, reformated the 2GB ext3 partition to ext4, using "Minitool parition wizard" and reinstalled the Sandvold ICS ROM with Amarullz. Everything seems fine, and it shows 2GB internal memory. However, I've noticed that the ROM gets more unstable the more apps I install (it shows 500MB installed apps now, after removing around 50MB)...
Most of the time what happens is that system apps start crashing (Google Music, Dialler, Contacts, etc.) out of nowhere. After a while normal apps crash on execution as well. Google music is useless, as it crashes after a few songs and brings down the whole phone. Other music apps don't have this problem.
Am I doing anything wrong with the way I set up Amarullz? Should I retry stock A2SD with ext4?
I'm using stock HBOOT, Nova launcher and stock kernel.
Got there ..... but.....
After repartitioning my SD card for the third time ... I finally have this working.
Thanks to all for help/advice ..... but (isn't there always a but) ....
Downloads from the Market/Play are extremely slow maybe 5+ times the same apps took before .... I have tried on different WiFi connections - still the same.
Is this a consequence of the write speed of my SD card (it is only class 4) ... I did see a post in another thread where a class 4 wasn't recommended, but this was refuted by others using a class 4 card.
Otherwise all apps seem to be running OK, with no real loss of performance.
I guess once I have finally loaded up on all the apps I want, the Play updates will be more infrequent and less of an issue.
I just installed cyanogen mod 7.2 stable(It's a clean install and i have wiped every thing) following that installed the latest gapps package(gapps-gb-20110828-signed).
The market would not even load and crash constantly.
I have tried these tips:
1.Cleared data and cache (settings-> applications-> market -> Then clearing cache)
2.Wiped Dalvik cache
3.Fixed permissions.
4.Changed "language"
5.Re-installed gapps package.
All this was to no avail.
Downloaded "jelly bean" market and installed it.
Now the market would load ok but it crashes when i try to download some application.It sucks.
Any suggestion ?
Try Increase your MTD Partition if you have any... It should fix it... If not, delete your account from the settings (Accounts) and log on while opening PlayStore. Hope it helps.
Have you flashed the right Gapps? Some of the latest ones are for ICS Users and i have found they dont work.
Just google "Gapps" and then find the one without ICS
Hope this helps
MacGyver Jack said:
Have you flashed the right Gapps? Some of the latest ones are for ICS Users and i have found they dont work.
Just google "Gapps" and then find the one without ICS
Hope this helps
Click to expand...
Click to collapse
Not working....yes,I am flashing the right gapps zip.
http://wiki.cyanogenmod.com/wiki/Latest_Version/Google_Apps
I have also verified the MD5 checksum.
olu.danNY said:
Try Increase your MTD Partition if you have any... It should fix it... If not, delete your account from the settings (Accounts) and log on while opening PlayStore. Hope it helps.
Click to expand...
Click to collapse
Deleting the account and factory reset is not working....even installing the CM 7.2 again and again is not working.
What does it have to do with MTD partition ?I have got sufficient internal memoery as i told you that it's a clean install and I don't have any app installed on my device except custom CM apps.
What about going to Setting > Manage applications > Market > Force close
I know you may have tried it and seems silly but i had a problem updating my apps and i did this and everything seems to work. What about a reboot?
Edit: I found this temporary workaround so see if this helps!
Here is what I did:
1- go to app manager from settings,
2- uninstall the latest version of google play store
3- clear data and cache of google play store
4- install version Google Play Store v3.5.19
5- when you open the market, google will still prompt you to update to the latest version (dont continue, leave it as it is)
6- if you want to update/install the apps do it thru the browser in your phone/computer (it will straight away update in your phone)
optimusodd said:
Deleting the account and factory reset is not working....even installing the CM 7.2 again and again is not working.
What does it have to do with MTD partition ?I have got sufficient internal memoery as i told you that it's a clean install and I don't have any app installed on my device except custom CM apps.
Click to expand...
Click to collapse
If you have Custom MTD partition, the issue may be, you have a low space reserved for System (Where GAPPS are installed) and more for Data.
Try using 175, 15... It is sufficent enough to run smoothly.
Cheers.
olu.danNY said:
If you have Custom MTD partition, the issue may be, you have a low space reserved for System (Where GAPPS are installed) and more for Data.
Try using 175, 15... It is sufficent enough to run smoothly.
Cheers.
Click to expand...
Click to collapse
Ah hell,why the hell didn't I ever think of this ?
Thanks for the life saving tip ,still not sure though if it was market version related or the system partition related.
Increased the partitons to [mtd 175 15].Market took a while,got updated to version 3.7.13 and it's working now.Really appreciate your help.
BTW,How did you figure out that [mtd 175 15] will work on "CM 7.2 Stable"?Just wondering can’t we take some more space from “system”.I have had [mtd 140 5] working well with "CM Nightly”.
Not sure how much we can take from system to flash CM 7.2 Stable but I guess we can still reduce "cache" to 5MB.
http://forum.xda-developers.com/showthread.php?t=1233340
What do you think ?
optimusodd said:
Ah hell,why the hell didn't I ever think of this ?
Thanks for the life saving tip ,still not sure though if it was market version related or the system partition related.
Increased the partitons to [mtd 175 15].Market took a while,got updated to version 3.7.13 and it's working now.Really appreciate your help.
BTW,How did you figure out that [mtd 175 15] will work on "CM 7.2 Stable"?Just wondering can’t we take some more space from “system”.I have had [mtd 140 5] working well with "CM Nightly”.
Not sure how much we can take from system to flash CM 7.2 Stable but I guess we can still reduce "cache" to 5MB.
http://forum.xda-developers.com/showthread.php?t=1233340
What do you think ?
Click to expand...
Click to collapse
I use mtd 140 20. Reducing the cache to 10 caused the force closing of market for me.
saadislam said:
I use mtd 140 20. Reducing the cache to 10 caused the force closing of market for me.
Click to expand...
Click to collapse
Are you sure you are running "CM 7.2 Stable" on HTC Buzz(Wildfire).
I tried [mtd 140 5] and it was causing "The application Market (process com.android.vending) has stopped unexpectedly. (FORCE CLOSE)".
optimusodd said:
Are you sure you are running "CM 7.2 Stable" on HTC Buzz(Wildfire).
I tried [mtd 140 5] and it was causing "The application Market (process com.android.vending) has stopped unexpectedly. (FORCE CLOSE)".
Click to expand...
Click to collapse
Try [mtd 140 20] . Like I said before reducing cache gave me force close. This configuration works fine for me. I was using cm7.2 stable since its release but now I am using lewa with the same partitions.
Sent from my HTC Wildfire using XDA
Don't ever, EVER underestimate olu.danNY's advice!
And search a lil' before posting... I've had the same problem not so long ago:
http://forum.xda-developers.com/showthread.php?t=1689239
I found out the partition size because I also wanted more space for Data as I don't like installing apps on SD (It can easily get corrupted as you use the SD with your PC during File Transfer, etc and or malfunction as some SD cards aren't that strong and I don't trust any!). That partition made it run.
Another way you can increase your partion size is simply by taking out pre-installed apps and or ringtones/notifications, etc you feel you don't need (My style). Anyway, I run Erwin P's ICS on Wildy now while having a backup of my CM7 incase I need to use the Camera/Video app again... LOL (I haven't tried using the dual booting thing... Always speculating, say I am lazy... Will try that out someday soon).
Anyways... Glad you have your phone working now.
Cheers.
olu.danNY said:
I found out the partition size because I also wanted more space for Data as I don't like installing apps on SD (It can easily get corrupted as you use the SD with your PC during File Transfer, etc and or malfunction as some SD cards aren't that strong and I don't trust any!). That partition made it run.
Another way you can increase your partion size is simply by taking out pre-installed apps and or ringtones/notifications, etc you feel you don't need (My style). Anyway, I run Erwin P's ICS on Wildy now while having a backup of my CM7 incase I need to use the Camera/Video app again... LOL (I haven't tried using the dual booting thing... Always speculating, say I am lazy... Will try that out someday soon).
Anyways... Glad you have your phone working now.
Cheers.
Click to expand...
Click to collapse
I kind of agree with most of your post,I only ever use ext for sense roms.
You say " Another way you can increase your partion size is simply by taking out pre-installed apps and or ringtones/notifications, etc you feel you don't need" I now what you mean but this doesn't increase your partition size,removing files etc from system only frees up space in the partition not increase it. Custom mtd is the only method I know to increase system partition. Regards slym.
MokeeOS
slymobi said:
I kind of agree with most of your post,I only ever use ext for sense roms.
You say " Another way you can increase your partion size is simply by taking out pre-installed apps and or ringtones/notifications, etc you feel you don't need" I now what you mean but this doesn't increase your partition size,removing files etc from system only frees up space in the partition not increase it. Custom mtd is the only method I know to increase system partition. Regards slym.
MokeeOS
Click to expand...
Click to collapse
Sorry... I guess that ain't clear enough... What I meant is this... Remove some stuffs from the ROM and Increase your Custom MTD partition... For example, if 100, 10 makes it run smoothly without edit, after edit, 90, 10 might run it good giving you extra 10MB for data... Hope I am clear here.
Cheers.
Sorry for double posting... Connection ish...
---------- Post added at 10:39 AM ---------- Previous post was at 10:27 AM ----------
slymobi said:
I kind of agree with most of your post,I only ever use ext for sense roms.
You say " Another way you can increase your partion size is simply by taking out pre-installed apps and or ringtones/notifications, etc you feel you don't need" I now what you mean but this doesn't increase your partition size,removing files etc from system only frees up space in the partition not increase it. Custom mtd is the only method I know to increase system partition. Regards slym.
MokeeOS
Click to expand...
Click to collapse
Sorry... I guess that ain't clear enough... What I meant is this... Remove some stuffs from the ROM and Increase your Custom MTD partition... For example, if 100, 10 makes it run smoothly without edit, after edit, 90, 10 might run it good giving you extra 10MB for data... Hope I am clear here.
Cheers.
HipHopBlond said:
Don't ever, EVER underestimate olu.danNY's advice!
And search a lil' before posting... I've had the same problem not so long ago:
http://forum.xda-developers.com/showthread.php?t=1689239
Click to expand...
Click to collapse
TBH I had done enough research to fix the issue.I did what one usually would have considered good research else it shouldn't have taken more than 5 endless days and nights
Even on CM forums,Android forums and several blogs.Don't know why couldn't find your post.
Anyway,"olu.danNY's" advice helped me else i was going to ditch CM7 for some other ROM .In my opinoin there should be a thread where users can update their working MTD partitions regarding their ROMs.
Right now I am running CM 7.2 Stable with [mtd 140 15] and some other users are running it even with [mtd 130 15]. i.e cache partiton was the root of the trouble.
olu.danNY said:
I found out the partition size because I also wanted more space for Data as I don't like installing apps on SD (It can easily get corrupted as you use the SD with your PC during File Transfer, etc and or malfunction as some SD cards aren't that strong and I don't trust any!). That partition made it run.
Another way you can increase your partion size is simply by taking out pre-installed apps and or ringtones/notifications, etc you feel you don't need (My style). Anyway, I run Erwin P's ICS on Wildy now while having a backup of my CM7 incase I need to use the Camera/Video app again... LOL (I haven't tried using the dual booting thing... Always speculating, say I am lazy... Will try that out someday soon).
Anyways... Glad you have your phone working now.
Cheers.
Click to expand...
Click to collapse
I also prefer removing pre-installed apps using TB but that doesn't really help you that much.
Custom MTD partition does the real rescue and you can also use "S2E" to gain more space by moving apps to Ext partition e.g games,maps.Just make sure you don't move app data to Ext.
SOLVED
P.S. Don't attempt to shrink the cache partition "too much".
Keep it(Cache) ≥ 15
optimusodd said:
SOLVED
P.S. Don't attempt to shrink the cache partition "too much".
Keep it(Cache) ≥ 15
Click to expand...
Click to collapse
YMMV - especially with CM7. It has been mentioned a few times over the forum that CM7 has a bind script which makes your whole /data partition used as cache - as long as it's activated (default) and not corrupted there shouldn't be any problems with the play store. No idea regarding other situations but I know of people running a 5MB cache partition on CM7...
eventcom said:
YMMV - especially with CM7. It has been mentioned a few times over the forum that CM7 has a bind script which makes your whole /data partition used as cache - as long as it's activated (default) and not corrupted there shouldn't be any problems with the play store. No idea regarding other situations but I know of people running a 5MB cache partition on CM7...
Click to expand...
Click to collapse
Yep,I know CM7 has some sort of script that automatically moves cache to data partition if it overflows(larger than the cache size).
I have had [mtd 140 5] working well with "CM Nightly”.
No idea why it is causing trouble with CM7.2-Stable. Maybe it's lacking that script which makes it sufficent enough to run smoothly if cahce partition is <15.
Hello,
I installed on my Desire with STOCK HBOOT Sandvold ICS in the Version 0.17.1.1. I choosed stock a2sd in the installation and active in terminal a2sd install. Then I restored my apps by Mybackup Root. I have now the problem if I want to install a app from the market I get the error message "No Disk space available" (or something like that, I'm using German language).
I have a 512mb ext4 partition and activate a2sd in Terminal. I searched the topic for problems like that and found that I have to install mount2sd. I did this, but it didn't help either.
What should I do now? I haven't enough posts to post in the sandvold ics topic.
Greets,
Burak
You should go back to GB...
Sent from my GT-P3100 using Flashes and Thunders
nlooooo said:
You should go back to GB...
Sent from my GT-P3100 using Flashes and Thunders
Click to expand...
Click to collapse
Why? No.
If you can live with slower perfomance, active the stock a2sd again with answers: y, y ,y
vBurak said:
Hello,
I installed on my Desire with STOCK HBOOT Sandvold ICS in the Version 0.17.1.1. I choosed stock a2sd in the installation and active in terminal a2sd install. Then I restored my apps by Mybackup Root. I have now the problem if I want to install a app from the market I get the error message "No Disk space available" (or something like that, I'm using German language).
I have a 512mb ext4 partition and activate a2sd in Terminal. I searched the topic for problems like that and found that I have to install mount2sd. I did this, but it didn't help either.
What should I do now? I haven't enough posts to post in the sandvold ics topic.
Greets,
Burak
Click to expand...
Click to collapse
I had exactly the same problem. At first I chose during flashing the option "Regular a2sdext" as it seems good to me. However, nothing has changed, it was not working for me at all. Then I reflashed again with "Stock a2sd" and after booting I went to terminal and activated it. I tried it with several combinations (in some of them I got the message "Insufficcient storage available" and I only had like 5 apps installed...). At the end I finally made it work with the combination that is recommended by Sandvold - Y N Y. After that I have been installing several apps and my internal memory does not go down almost at all :good:... I will see later, but for now, this is the best set up for me....
I had this problem
I had this problem with one application. When installing from market, there'd be a pop up message saying that there was no more storage space even though there was plenty.
A few hours later, everything went back to normal and I managed to install all the apps I wanted.
(Side question: have you guys updated to Sandvold ICS 0.18 Beta?! I have, but I lost root access, so now I'm trying to regain it. Could someone alert Sandvold? I'm a new member and I can't post to 'Android development forums")
CzarD said:
I had this problem with one application. When installing from market, there'd be a pop up message saying that there was no more storage space even though there was plenty.
A few hours later, everything went back to normal and I managed to install all the apps I wanted.
(Side question: have you guys updated to Sandvold ICS 0.18 Beta?! I have, but I lost root access, so now I'm trying to regain it. Could someone alert Sandvold? I'm a new member and I can't post to 'Android development forums")
Click to expand...
Click to collapse
what do you mean that you lost root access? I was planning to upgrade to 0.18 today (I flashed 0.17.1 yesterday, but I have an issue with my phone - I cannot recevie any phone calls - and I hope another flash might help it...), so I guess I will wait a while....
skubko said:
what do you mean that you lost root access? I was planning to upgrade to 0.18 today (I flashed 0.17.1 yesterday, but I have an issue with my phone - I cannot recevie any phone calls - and I hope another flash might help it...), so I guess I will wait a while....
Click to expand...
Click to collapse
I have been testing 0.18 for a few hours now. Your phone issues should be resolved except you will encounter a new issue. You will lose superuser privilliges, to restore this, you have to install a zip of superuser through recovery.
My comments on Sandvold ICS 0.18
skubko said:
what do you mean that you lost root access? I was planning to upgrade to 0.18 today (I flashed 0.17.1 yesterday, but I have an issue with my phone - I cannot recevie any phone calls - and I hope another flash might help it...), so I guess I will wait a while....
Click to expand...
Click to collapse
I had 0.17.1.1 and all was well, it was tiny bit laggy, but overall it was cool.
i updated to 0.18, and I lost root access: the apps requesting SuperUser premissions were denied. (If you don't know what root access is, please google it)
As iyf said, you can flash the zip provided in Sandvold's official thread to restore root access. Check page 1601 or so for the flashable zip that will restore root access. I did so, and regained root access.
Then I got back all my apps as Sandvold 0.18 is my daily driver. But as I was using it, I noticed that whenever you change something in the system settings, it does not apply immediately. For example, I want my phone to lock immediately when it goes to sleep, well it simply doesn't. The power menu lost a few of the shortcuts it had in 0.17.1.1 (sound profiles...) and even if you restored them in the system settings, it won't change.
All in all, 0.18 is great step in terms of stability and reactiveness. No more scroll lag, apps open seamlessly, and no more 3G signal problems. The camera still isn't working though. Nevertheless, bizarrely the system lost its coherence: the system settings are not immediately applied and used, and the screen just won't lock. Those are the problems I encountered this afternoon.
I hope Sandvold takes a look at this thread as I cannot post on the official ROM thread coz I just registered on XDA.
(My Home button died today, even if I press it really hard, it won't respond, but I think it's a hardware issue)
EDIT: About the no more space issue, I had this today even though there was plenty of space left. I rebooted the phone and the warning disappeared.
CzarD said:
I had 0.17.1.1 and all was well, it was tiny bit laggy, but overall it was cool.
i updated to 0.18, and I lost root access: the apps requesting SuperUser premissions were denied. (If you don't know what root access is, please google it)
As iyf said, you can flash the zip provided in Sandvold's official thread to restore root access. Check page 1601 or so for the flashable zip that will restore root access. I did so, and regained root access.
Then I got back all my apps as Sandvold 0.18 is my daily driver. But as I was using it, I noticed that whenever you change something in the system settings, it does not apply immediately. For example, I want my phone to lock immediately when it goes to sleep, well it simply doesn't. The power menu lost a few of the shortcuts it had in 0.17.1.1 (sound profiles...) and even if you restored them in the system settings, it won't change.
All in all, 0.18 is great step in terms of stability and reactiveness. No more scroll lag, apps open seamlessly, and no more 3G signal problems. The camera still isn't working though. Nevertheless, bizarrely the system lost its coherence: the system settings are not immediately applied and used, and the screen just won't lock. Those are the problems I encountered this afternoon.
I hope Sandvold takes a look at this thread as I cannot post on the official ROM thread coz I just registered on XDA.
(My Home button died today, even if I press it really hard, it won't respond, but I think it's a hardware issue)
EDIT: About the no more space issue, I had this today even though there was plenty of space left. I rebooted the phone and the warning disappeared.
Click to expand...
Click to collapse
of course I know what root is, otherwise I would not be here, right? ... I just did not understand what happened to you when you updated to 0.18.... Now I understand.... and regarding to your issues - in 0.17.1 I had exactly the same problem - my screen did not lock even I set it up correctly and I also had the problem with Home button, it simply did not work + I could not receive any phone calls... all of that was really annoying and I tried to find some help on sandvold's blog, without any success, I also tried their IRC, nobody helped me either. I did not want to do a full wipe again, but at the end I did (and now I have to set up everything as well ) but after full wipe, everything is working correclty... I can receive phone calls, my screen locks and home button is also working ... so I recommend you to do a full wipe, I am sure it will resolve your issues as well...
CzarD said:
I had this problem with one application. When installing from market, there'd be a pop up message saying that there was no more storage space even though there was plenty.
A few hours later, everything went back to normal and I managed to install all the apps I wanted.
(Side question: have you guys updated to Sandvold ICS 0.18 Beta?! I have, but I lost root access, so now I'm trying to regain it. Could someone alert Sandvold? I'm a new member and I can't post to 'Android development forums")
Click to expand...
Click to collapse
I also lost the root access with Beta 0.18(with full wipe),
(Beta 0.17 "root access" is OK!)
Superuser is out of order with this issue so that I can't activate A2SD
btw,
I have once tried the "AD2SDX", but didn't work normally:
I merged 1GB ext4 for it. And every time when I install about 10~15 Apps
A message on the top of the screen would tell me that I almost reached the limit.
(I'm using traditional Chinese, I don't know what it was written in English)
skubko said:
of course I know what root is, otherwise I would not be here, right? ... I just did not understand what happened to you when you updated to 0.18.... Now I understand.... and regarding to your issues - in 0.17.1 I had exactly the same problem - my screen did not lock even I set it up correctly and I also had the problem with Home button, it simply did not work + I could not receive any phone calls... all of that was really annoying and I tried to find some help on sandvold's blog, without any success, I also tried their IRC, nobody helped me either. I did not want to do a full wipe again, but at the end I did (and now I have to set up everything as well ) but after full wipe, everything is working correclty... I can receive phone calls, my screen locks and home button is also working ... so I recommend you to do a full wipe, I am sure it will resolve your issues as well...
Click to expand...
Click to collapse
By full wipe you mean:
1. wipe data/factory reset
2. wipe cache
3. wipe dalvik cache
4. wipe battery stats
right?
I always do that when I flash a new ROM... Anyway, will try again later and hope that it works.
Caesar
CzarD said:
By full wipe you mean:
1. wipe data/factory reset
2. wipe cache
3. wipe dalvik cache
4. wipe battery stats
right?
I always do that when I flash a new ROM... Anyway, will try again later and hope that it works.
Caesar
Click to expand...
Click to collapse
yes, it is what I meant... I did full wipe before flashing and then another after it ... I do not wipe battery stats during that process,but it does not matter I hope it will work for you...
UserMatty said:
I also lost the root access with Beta 0.18(with full wipe),
(Beta 0.17 "root access" is OK!)
Superuser is out of order with this issue so that I can't activate A2SD
btw,
I have once tried the "AD2SDX", but didn't work normally:
I merged 1GB ext4 for it. And every time when I install about 10~15 Apps
A message on the top of the screen would tell me that I almost reached the limit.
(I'm using traditional Chinese, I don't know what it was written in English)
Click to expand...
Click to collapse
Whenever I got this message, I'd reboot or hot reboot and it would disappear. I can't remember if I had the same script.
---------- Post added at 08:41 PM ---------- Previous post was at 08:36 PM ----------
skubko said:
yes, it is what I meant... I did full wipe before flashing and then another after it ... I do not wipe battery stats during that process,but it does not matter I hope it will work for you...
Click to expand...
Click to collapse
I did a full wipe again, and everything went back to perfect working order. Thanks man
CzarD said:
Whenever I got this message, I'd reboot or hot reboot and it would disappear. I can't remember if I had the same script.
---------- Post added at 08:41 PM ---------- Previous post was at 08:36 PM ----------
I did a full wipe again, and everything went back to perfect working order. Thanks man
Click to expand...
Click to collapse
you mean working with AD2SDX ?
Can I ask you how do you merge and format ext4 ?
Actually, I'm using MiniTool Partition Wizard, is it okay ?
cause I did reboot after I saw the message, but didn't work.
But I surely know that I can see "1GB" in "Apps" in "settings"
quite confusing
UserMatty said:
you mean working with AD2SDX ?
Can I ask you how do you merge and format ext4 ?
Actually, I'm using MiniTool Partition Wizard, is it okay ?
cause I did reboot after I saw the message, but didn't work.
But I surely know that I can see "1GB" in "Apps" in "settings"
quite confusing
Click to expand...
Click to collapse
It's not okay, minitool doesn't do that correctly. Use 4ext recovery to partition your sd card.
Sent from my HTC Desire using Flashes and Thunders
UserMatty said:
you mean working with AD2SDX ?
Can I ask you how do you merge and format ext4 ?
Actually, I'm using MiniTool Partition Wizard, is it okay ?
cause I did reboot after I saw the message, but didn't work.
But I surely know that I can see "1GB" in "Apps" in "settings"
quite confusing
Click to expand...
Click to collapse
Quite confusing indeed. I must say I'm no expert developer or programmer, heck I'm an engineering student. i just experiment on my Desire. But my experience in bricking/unbricking/flashing/etc tells me the following:
Minitool wizard apparently is not okay. I used it at first too but my Desire just could not read or detect the EXT3 partition I created. I tried EXT4. I tried different roms and scripts, none worked for me. (To be honest, I only tried 3 roms and a few scripts).
What I used is plain simple: Clockworkmod Recovery partitioning tools. It works for me!
First restore your SD card to full FAT32 configuration (I might suggest changing the basic storage unit from a few bytes to a few kilobytes as it might increase SD card responsiveness).
BACK IT UP, you will lose everything on it when you partition it in CWM.
Boot into recovery and select partition SD card (It is advised that the size of your partition does not exceed 1.5 GB as a few ROM developers have pointed out - not Sandvold though- I use 512 MB, which is more than enough for me). Set SWAP to 0 Bytes. (i have no idea what swap is, should google it, but most threads advise a swap of 0 B).
That's it, you have your partition.
I use CWM and Sandvold 0.18. If you use this setup, everything should be okay, at least it's ok on my phone.
I use stock a2sd when flashing Sandvold ICS ROMs.
I'm on stock HBOOT, S-OFF, and using the regular Kernel that comes with Sandvold 0.18. (I tried tiamat, but the battery dies after half a day of use!)
CzarD said:
Quite confusing indeed. I must say I'm no expert developer or programmer, heck I'm an engineering student. i just experiment on my Desire. But my experience in bricking/unbricking/flashing/etc tells me the following:
Minitool wizard apparently is not okay. I used it at first too but my Desire just could not read or detect the EXT3 partition I created. I tried EXT4. I tried different roms and scripts, none worked for me. (To be honest, I only tried 3 roms and a few scripts).
What I used is plain simple: Clockworkmod Recovery partitioning tools. It works for me!
First restore your SD card to full FAT32 configuration (I might suggest changing the basic storage unit from a few bytes to a few kilobytes as it might increase SD card responsiveness).
BACK IT UP, you will lose everything on it when you partition it in CWM.
Boot into recovery and select partition SD card (It is advised that the size of your partition does not exceed 1.5 GB as a few ROM developers have pointed out - not Sandvold though- I use 512 MB, which is more than enough for me). Set SWAP to 0 Bytes. (i have no idea what swap is, should google it, but most threads advise a swap of 0 B).
That's it, you have your partition.
I use CWM and Sandvold 0.18. If you use this setup, everything should be okay, at least it's ok on my phone.
I use stock a2sd when flashing Sandvold ICS ROMs.
I'm on stock HBOOT, S-OFF, and using the regular Kernel that comes with Sandvold 0.18. (I tried tiamat, but the battery dies after half a day of use!)
Click to expand...
Click to collapse
just to add - I have Amon RA Recovery and I partitioned my SD card by that, it was also working without any problems everytime I did it...
@CzarD - I am glad to hear that the wipe helped you...
You should try out the Amarullz or INT2SD from the Aroma installer. I have INT2SD and I have 1,3G of free space (2G EXT partition)
CzarD said:
Quite confusing indeed. I must say I'm no expert developer or programmer, heck I'm an engineering student. i just experiment on my Desire. But my experience in bricking/unbricking/flashing/etc tells me the following:
Minitool wizard apparently is not okay. I used it at first too but my Desire just could not read or detect the EXT3 partition I created. I tried EXT4. I tried different roms and scripts, none worked for me. (To be honest, I only tried 3 roms and a few scripts).
What I used is plain simple: Clockworkmod Recovery partitioning tools. It works for me!
First restore your SD card to full FAT32 configuration (I might suggest changing the basic storage unit from a few bytes to a few kilobytes as it might increase SD card responsiveness).
BACK IT UP, you will lose everything on it when you partition it in CWM.
Boot into recovery and select partition SD card (It is advised that the size of your partition does not exceed 1.5 GB as a few ROM developers have pointed out - not Sandvold though- I use 512 MB, which is more than enough for me). Set SWAP to 0 Bytes. (i have no idea what swap is, should google it, but most threads advise a swap of 0 B).
That's it, you have your partition.
I use CWM and Sandvold 0.18. If you use this setup, everything should be okay, at least it's ok on my phone.
I use stock a2sd when flashing Sandvold ICS ROMs.
I'm on stock HBOOT, S-OFF, and using the regular Kernel that comes with Sandvold 0.18. (I tried tiamat, but the battery dies after half a day of use!)
Click to expand...
Click to collapse
As I know, swap in linux is somewhat like virtual memory in Windows.
Will be launched when the system is in low memory.
That's exactly everything I know
I'm now Using Revolutionary CWM v4.0.1.4, stock HBOOT, S-OFF
And just follow your way to full wipe then install the system again(stock a2sd)
I still can't get the root access. thus, I can't activate a2sd in terminal
PS: with Beta 0.18
But Beta 0.17.1 currently work!
Hello Folks,
I have just moved from MW CM 5.0 to MW 4.3 (Oxygen) due to some call-delay issue of the first one.
MW 4.3 is quick and with no major bugs. the only bad surprise is the memory availability. Making a Titanium restore of all the previouse app+dada I crashed in the annoying "not enough memory" message.
I imagine that the fact that the M2SD is managed internally change the performance of it (true?). By the way I was playing with the different option trying to gain some space and I came across a new functionality (new for me) such as "bind /data/data to sd-ext/app-data" not really sure what it does but it increased my free internal memory from 12mb to 89mb. GREAT !! the only problem is that the overall speed of the system went drastically down. I guess it s normal as application will read their data from the SD instead of the quicker internal memory. Unfortunately with this option on the whole gsm was not usable anymore.
My question is: Is there any way to free more memory using this ROM? (with a decent GSM's response time)
Thanks for your help
Stefano
stegal said:
Hello Folks,
I have just moved from MW CM 5.0 to MW 4.3 (Oxygen) due to some call-delay issue of the first one.
MW 4.3 is quick and with no major bugs. the only bad surprise is the memory availability. Making a Titanium restore of all the previouse app+dada I crashed in the annoying "not enough memory" message.
I imagine that the fact that the M2SD is managed internally change the performance of it (true?). By the way I was playing with the different option trying to gain some space and I came across a new functionality (new for me) such as "bind /data/data to sd-ext/app-data" not really sure what it does but it increased my free internal memory from 12mb to 89mb. GREAT !! the only problem is that the overall speed of the system went drastically down. I guess it s normal as application will read their data from the SD instead of the quicker internal memory. Unfortunately with this option on the whole gsm was not usable anymore.
My question is: Is there any way to free more memory using this ROM? (with a decent GSM's response time)
Thanks for your help
Stefano
Click to expand...
Click to collapse
Well... that's the only option available on that rom, is to enable and mount sdext, that way it will move apps to the sdcard. I don't think it moves dalvik. Either way, what's your sdcard and class? Usually moving only apps doesn't really slow nothing important unless it's a class 2 card or some card with slower speeds. Even moving dalvik the rom should stay fast IMO. There's a slowdown but not that much.
MidnightDevil said:
Well... that's the only option available on that rom, is to enable and mount sdext, that way it will move apps to the sdcard. I don't think it moves dalvik. Either way, what's your sdcard and class? Usually moving only apps doesn't really slow nothing important unless it's a class 2 card or some card with slower speeds. Even moving dalvik the rom should stay fast IMO. There's a slowdown but not that much.
Click to expand...
Click to collapse
I think that option I used "bind" move app and data to sd-ext. my sd is a class 4.
stegal said:
I think that option I used "bind" move app and data to sd-ext. my sd is a class 4.
Click to expand...
Click to collapse
if u check the attachments for the rom in the development thread, there should be a dalvik2sd.zip there, i think i posted it there ages ago. just flash it in recovery.
Sent from my HTC Desire
dalvik2sd
jmcclue said:
if u check the attachments for the rom in the development thread, there should be a dalvik2sd.zip there, i think i posted it there ages ago. just flash it in recovery.
Sent from my HTC Desire
Click to expand...
Click to collapse
Jm,
I have a comment for you. First while I was looking for you post (could not find it though) I came across something that goes against your post, please read the following
<<
Do a clean installing!
Tips:
To enable Apps2Sdext and/or Data2SdExt visit Settings|Applications|Development.
To set the default installation partition go to Settings|Applications.
To move applications from sd-ext|sdcard|internal Settings|Applications|Manage Applications.
There is no Dalvik2SdExt because .dex will follow the location of the apk, so if you install an application on sd-ext the dex will be on sd-ext, the same applys for internal or sdcard.
Do not use A2sd scripts. >>
So where is the truth. Do I need this script or not. If you can explain me why could you also provide a link to this script?
Thanks in advance
Stefano
il post it later if u want it, im on my phone. u will get more memory
Sent from my HTC Desire
jmcclue said:
il post it later if u want it, im on my phone. u will get more memory
Sent from my HTC Desire
Click to expand...
Click to collapse
The part that confuse me is that "There is no Dalvik2SdExt because .dex will follow the location of the apk, so if you install an application on sd-ext the dex will be on sd-ext, the same applys for internal or sdcard."
I do not understand .. what he is saying, there is not dalvik2Sd and there is not need to have one (something like the A2SD) or there is not dalvik2sd so go ahead to install one.
if you know that the dalvik2sd script can free some space without side effects...pls post it
thanks
stegal said:
The part that confuse me is that "There is no Dalvik2SdExt because .dex will follow the location of the apk, so if you install an application on sd-ext the dex will be on sd-ext, the same applys for internal or sdcard."
I do not understand .. what he is saying, there is not dalvik2Sd and there is not need to have one (something like the A2SD) or there is not dalvik2sd so go ahead to install one.
if you know that the dalvik2sd script can free some space without side effects...pls post it
thanks
Click to expand...
Click to collapse
basically if u check the box to install apps in sd-ext, from "now" on apps will install on sd-ext, but there is aready dalvik cache on ur phone before u check the boxes and thats what the dalvik2sd.zip moves(i think). iv used the zip and has no effect on performance or anything, it just free's up a wee bit of space.
il post the zip in bout 2 hours coz im busy. if u look at the OxyZM thread, click the attachments, the file is there.
Sent from my HTC Desire
jmcclue said:
il post it later if u want it, im on my phone. u will get more memory
Sent from my HTC Desire
Click to expand...
Click to collapse
hi Jmcclue,
I tried to find your post...without result. I found one where you say that it was possible to download "click the wee paper clip", ok now I sound really silly but...where should I click? (no..I am not a blondie even if I sound like it )
F1, F1!!
Stefano
stegal said:
hi Jmcclue,
I tried to find your post...without result. I found one where you say that it was possible to download "click the wee paper clip", ok now I sound really silly but...where should I click? (no..I am not a blondie even if I sound like it )
F1, F1!!
Stefano
Click to expand...
Click to collapse
lol il just upload it
Sent from my HTC Desire
Dalvik to sd for MildWild Oxygen and where the "wee paper clip" is lol (attachments).
md5 - d7ba5d384a78d14e57d293cd877eef7b
jmcclue said:
lol il just upload it
Sent from my HTC Desire
Click to expand...
Click to collapse
...hello jm just coming back to thank you for your support. Finally I have a stable situation. Nevertheless after installing the script you have uploaded nothing changed. I had to factory reset, reinstal CM 4.3, install your script and everthing went smooth. Now it s 2 weeking I am keeping installing new apps and my free memory stay basically stable uner 80mb free space.
I have just one curiosity..if I go to Settings--> storage I see SD-ext "unavailable". After all I do not care much but if it is unavailable...where my apps have been stored so far? ps I reserved 1Gb of SD-ext .
Cheers
ps I just installed another apps of 3mb...no changes in the free space, so cool I feel like "no-limits"
stegal said:
...hello jm just coming back to thank you for your support. Finally I have a stable situation. Nevertheless after installing the script you have uploaded nothing changed. I had to factory reset, reinstal CM 4.3, install your script and everthing went smooth. Now it s 2 weeking I am keeping installing new apps and my free memory stay basically stable uner 80mb free space.
I have just one curiosity..if I go to Settings--> storage I see SD-ext "unavailable". After all I do not care much but if it is unavailable...where my apps have been stored so far? ps I reserved 1Gb of SD-ext .
Cheers
ps I just installed another apps of 3mb...no changes in the free space, so cool I feel like "no-limits"
Click to expand...
Click to collapse
not sure if it's been mentioned, but you should also be on cm7r2 hboot to maximise space (need to be s-off).
then follow the instructions on the first page of the thread to enable sd-ext. this will move user apps + user app dalvik cache to sd-ext. in other words, most of the dalvik cache should already be on sd-ext.
the dalvik2sd script should only move system dalvik cache to sd-ext, which will save you a little space.
to check everything is working, use an app like 'diskusage' to browse your partitions.