Kaiser loocked before flashing android - Tilt, TyTN II, MDA Vario III Android Development

Yesterday I try to flash android on nand in my at&t tilt, with valentines rom, I flash the kernel recomended and follow the instructions but the rom don't boot, so, I dedided re flash Winmo.
First at all, I try to flash a cooked rom I make, the flash completed 100% and the phone reboot, but stuck on RBG screen!!
Then I try to flash winmo 6.1 custom rom, and this one works well!! but.........
is the only rom I can use, cause if I flash another rom (custom or cooked) the boot stuck on RBG screen (the screen where the radio, roms and version appears in red letters)
I try to unlock security again, thinking this maybe the problem, using pof tutorial, and having in tricolor screen the message SECURITY UNLOCKED in red letters. before that, I flash again another rom but the problem still!!
I try to flash a winmo 6.0 custom rom, to use jowkys tutorial but the rom stuck in RBG screen too.
So... What can I do? I'm confused... PLEASE HELP ME!!!!!!
For extra info... in memory data, in the part of internal storage only appear 30Mb!!!! and not the 145Mb that should be!!!
SLP: 1.0 olipof
Radio: 1.70Olinex
ROM: Winmo 6.1 oficial

I think you need a recent hard SPL.
Look at here: http://forum.xda-developers.com/showthread.php?t=498320
If I am correct I installed DaveShaw's 3.34. I can't check it because i'm not a kaiser owner now.
Bye

Related

No way to flash new roms

help me!!! After have installed sheen no nonsense Version 5 on my P3300 i cannot flash any new rom.
If i'm trying the updater with ROMUtilityUpdater the phone stuck in the 3 colors screen, while if i'm trying from the sd's method, the white screen with "checking sd" pops up for less than a second, than turn to 3 colors screen!!! I need help!!!!
solved... i've used the http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing's In case the above method does not deliver as promised, proceed as follows
When you've some problem in flashing new roms...try to flash the original rom than a cooked rom

Impossible to flash any ROM radio , stop at 7%

hi all, my situation in this:
i ve an htc s300+ with hardspl 1.30 installed that in boot loader write "WLAN error" , when boot it is blocked to 2nd screen (HTC logo). i ve try with any solution on this forum.. with mtty not solution, with "splxploit" no solution.. i understand that the problem is when i try to flash a Rom radio it don't wont load over 7% and reboot in boot loader, or a original italian complete rom WM5 it don't wont load over 13% but not reboot.
if i flash only the ROM WM6 coocked it load full but the problem is the same.. (after reboot blocket to 2nd screen)..i ve try to flash also directly with mini SD but the loading stopped after start (about 13%)..
the situation is the same if i load with "splxploit" the hardspl 1.20, or sspl 1.05 or 1.06...
i try all solution in my mind... but no resolve this problem..
can anyone with more experience that me to help?
thanks
sorry but i am italian and my english is not good..
I think you have not complete reading all instruction before you start.
HARDSPL Olipro 1.30 is not able to flash Radio Rom as feedback by many.
You should use Olipro 1.20 or Des's SPL.
Sorry, I have the same problem,
How I can downgrade the H-SPL from 1.3 to 1.2 if the P3600 don't boot on, it is stop at startup logo HTC
Thx
Just put your device manualy in bootloader and flash again...It should work
IT don't work.
The process it is ok at 100%, but if I put the pda in bootloader I have again 1.30
Where I wrong?
Have you tried to flash from SD Card? Maybe this would work differently.
Try flashing HTC official rom
As stupid as it sound, it worked for me. it seems the official WM5 rom has some recovery features. It takes forever to flash (and obviously it does some different stuff than cooked roms) but it took my bricked trinity from its brick mode at least twice the past 3 years. If you can't get hold on one, although I am sure it is on this forum, PM me and I will upload it for you. Just too tiered to do so if you have another source to take it from.
Look for RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship. Be aware after it you may need to update the radio as well, but this is easy.
BigE
Please upload the file!!!!!!!!
Thx
for lazy ppl who do not search
http://rapidshare.com/files/47349234/latest_dopod_wm6_anznospl.rar.html
BigE
try this one
http://cid-8231c261cbdd4326.skydriv....751.5|_6275|_1.56.70.11|_108|_Ship.part1.rar

Need help after flashing

hi guys,
have done the Hard SpL 1.3, added radio 1.5 and tried flashing the WWE JADECore + Manila2D 1.2 PTG version successfully but however the device does not go pass the HTC screen.
i then tried to flash Mary V3.7 lite but it does not load. Requires me to do recovery. However upon recovery , it shows by hello nasty - smart mobility. Stuck right there
i flash JADECore + Manila2D 1.2 PTG again... its loading and successful, however it still reboots to hello nasty - smart mobility and stop again.
Did i miss something out? i dont understand as i assume after the Hard SPL and radio , the rest of the rom can be flashed.
i Have tried several times with this rom and mary's rom
and have soft resetted several times.
Hope for some help.
any help at all?
try official ROM first
hmm okies..
could it be that i didn't unlock the phone yet?
now its in bootloader mode.
how do i flash the unlocker or official rom in?
i still have the original wm5 disc
tried flashing the RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship original wm6.1 rom but it stops at 28% everytime i try.
the custom roms flash nicely and everything boots up until the first or 2nd page then it stops.
i'm on SPL 1.3olio and i guess the radio doesnt matter but its a 1.5
anyone could help? i'm offering a small token via paypal for anyone who can walk my trinity back to the light..
Although Olipro's Hard-SPL 1.30 is the newest version, many people have reported not being able to upgrade their device with this version running. For now it is recommended to use 1.20 or Des' crash-proof SPL for successful upgrades
Click to expand...
Click to collapse
Found at http://trinityguides.info
have used SPLxploit and it changed to SPL 3.03000
what do i do next? install HardSPL? Install CID unlocker?
boot from SD?
someone ? anyone?

Flashing Problem

Hi All.
I Need your help.
I have a Diamond Runnig HardSPL 1.40 Olinex, Gen Y ROM, 1.11 Radio.
Everything was fine until my diamond enter on the three color flash screen, i instaled 3 diferent ROM and it's not booting any more. I tried everything and nothing heappened, a shut down install a new ROM and it don't boot, backing to the flash screen.
USB is working fine.
Some one can help me? URGENT!!!!!
you means you always enter to 3 color screen when you boot?
you can try to flash to official rom which sometime it can help.
or another silly suggestion, you sure your VolDown button was not stuck??

HELP Stuck in boot after flashing rom

Hey, im new here and very much a noob.
Anyway i just HardSPL and flashed a rom on my new HTC touch pro 2.
Everything went smoothly until it booted up after flashing the ROM.
It comes up with the TouchPro 2 Logo and then goes to a black and white stipped page with a few numbers in the bottom corner and i have no idea if i bricked it or if i've done something wrong!
Can someone please help me!?
If you followed this instructions all should be ok:
http://forum.xda-developers.com/showthread.php?t=550540
Well you need more info.
You were able to hardSPL your phone correct?
What phone? what hardSPL did you run?
What rom did you flash?
If it wont boot then I would try to reflash the rom or try another rom.

Categories

Resources