Hey, im new here and very much a noob.
Anyway i just HardSPL and flashed a rom on my new HTC touch pro 2.
Everything went smoothly until it booted up after flashing the ROM.
It comes up with the TouchPro 2 Logo and then goes to a black and white stipped page with a few numbers in the bottom corner and i have no idea if i bricked it or if i've done something wrong!
Can someone please help me!?
If you followed this instructions all should be ok:
http://forum.xda-developers.com/showthread.php?t=550540
Well you need more info.
You were able to hardSPL your phone correct?
What phone? what hardSPL did you run?
What rom did you flash?
If it wont boot then I would try to reflash the rom or try another rom.
Related
Hello i flashed nbd 9.1 on my wizard and after the installation everything seemed to work fine but... the screen is stuck on the start up screen.
anyone willing to help? =]
I'm assuming you own a wizard. Put your device in bootloader mode then try to flash back to the factory rom that your device was originally shipped with. Also you should post more information such as device name and type, IPL/SPL etc.
thank you
ill try that right now and sorry im kinda a beginner to this. Also is there anywhere in this forum where i can get the factory rom?
my
IPL: 1.01
SPL: 2.25
Brand new GSM TP2 with Dutch (NL) language ROM
I installed the Olinex HardSPL and checked it on the Bootloader screen.
I downloaded the AthineOS ROM and used the included CustomerRUU.exe file to flash the phone, running it and the ROM from my PC. All went without a hitch, finished at 100% in a minute or two, but now the phone won't get past the initial TOUCH pro 2 screen, the one with the red RGD rows at the bottom of the screen.
Please tell me I didn't brick it and it's an easy fix. What went wrong?
Same thing happened to me yesterday. The good people here showed me how to fix it. As long as you had HardSPL installed, you should be able to recover. See thread below for the fix:
http://forum.xda-developers.com/showthread.php?t=566371
Thank you! I did confirm I could go into bootloader and I did see that the HardSPL is installed. I even tried to reflash the ROM I used the first time. No luck there, though the RUU ran all the way through again. It stops at the point that the phone tries to reboot. I'm now downloading the Stock European WWE ROM to see if that will bail me out. I guess there's still some hope.
Success!!! As you said, Thank you, thank you, thank you, thank you
A friend of mine wanted this phone brought up to speed with 2.3 since it was completely stock. I was working on it rooted the device, s-off. Tried to flash a 2.3 rom but when it started booting it stayed in the HTC logo screen. what did I do wrong and how can I backtrack? I've read the noob guides but there isn't something similar to whats happening here.
Please Help!!!
Thanks guys!!!
You may forgot to configure the sd card for your the rom you flashed. Just boot into recovery, wipe everything, configure sd card and then flash rom again.
just try another rom. see how that goes
shalomhr said:
A friend of mine wanted this phone brought up to speed with 2.3 since it was completely stock. I was working on it rooted the device, s-off. Tried to flash a 2.3 rom but when it started booting it stayed in the HTC logo screen. what did I do wrong and how can I backtrack? I've read the noob guides but there isn't something similar to whats happening here.
Please Help!!!
Thanks guys!!!
Click to expand...
Click to collapse
yup. had similar when i hadnt done a full wipe. Also might be dependent on which 2.3 ROM you are trying to flash ... some require new HBOOTs etc .....
Yesterday I try to flash android on nand in my at&t tilt, with valentines rom, I flash the kernel recomended and follow the instructions but the rom don't boot, so, I dedided re flash Winmo.
First at all, I try to flash a cooked rom I make, the flash completed 100% and the phone reboot, but stuck on RBG screen!!
Then I try to flash winmo 6.1 custom rom, and this one works well!! but.........
is the only rom I can use, cause if I flash another rom (custom or cooked) the boot stuck on RBG screen (the screen where the radio, roms and version appears in red letters)
I try to unlock security again, thinking this maybe the problem, using pof tutorial, and having in tricolor screen the message SECURITY UNLOCKED in red letters. before that, I flash again another rom but the problem still!!
I try to flash a winmo 6.0 custom rom, to use jowkys tutorial but the rom stuck in RBG screen too.
So... What can I do? I'm confused... PLEASE HELP ME!!!!!!
For extra info... in memory data, in the part of internal storage only appear 30Mb!!!! and not the 145Mb that should be!!!
SLP: 1.0 olipof
Radio: 1.70Olinex
ROM: Winmo 6.1 oficial
I think you need a recent hard SPL.
Look at here: http://forum.xda-developers.com/showthread.php?t=498320
If I am correct I installed DaveShaw's 3.34. I can't check it because i'm not a kaiser owner now.
Bye
Ok so guys i had just rooted my htc wildfire s (or atleast thought i rooted it ) and was trying to install a cyanogen mod ROM , it would not install ,if it would install it would be stuck at the htc logo screen , now i thought this would be the fault of recovery so i decided to install another recovery and flash that with cmd (fastboot flash recovery recovery.img) but then when i booted in recovery it would show me the pink recovery, i got a little scared and flashed another recovery and now the recovery will not even boot . it will just go on htc logo and black screen , i tried many different recoveries but no avail , it is in s-on right now , please forgive me if this sounds noobish i really am a noob at this .please provide me with a solution and tell me if it is bricked and if i can repair it by taking it to a software shop and asking them to do it for me (Just advise me if i can come back from this)
Flash the first recovery, which actually worked, and if it installs, wipe everything and flash a basic CM7 rom. It'll work. It's just soft bricked don't worry.
parasthakur37 said:
Flash the first recovery, which actually worked, and if it installs, wipe everything and flash a basic CM7 rom. It'll work. It's just soft bricked don't worry.
Click to expand...
Click to collapse
actually i gave it to a software store , he said he couldn't do it as the files were not to be found ... i think it might have been bricked but seeing as i can access h-boot only and when i turn on the phone it only stays on the htc logo screen and does not proceed can you call this bricked . ? i tried the first recovery as you mentioned but it was no use ... i tried relocking and unlocking bootloader again but it seems as if that was unnecessary as nothing different happened .. im still waiting for an answer
This is really very weird.
Check this out
http://forum.xda-developers.com/showpost.php?p=28646721&postcount=5
Start from square one, unlock the bootloader, flash the recovery, if one doesn't install, try another, at least one will surely work, and then flash a new rom.
All the best.
Remember, android can never be bricked, there is always a way out.
parasthakur37 said:
This is really very weird.
Check this out
http://forum.xda-developers.com/showpost.php?p=28646721&postcount=5
Start from square one, unlock the bootloader, flash the recovery, if one doesn't install, try another, at least one will surely work, and then flash a new rom.
All the best.
Remember, android can never be bricked, there is always a way out.
Click to expand...
Click to collapse
thank u for the quick reply but i donot know how but i just flashed an old recovery and voila it worked .. now i am a little scared to proceed please guide me what to do to bring back the stock rom ...
ITS DONE
i finally got it to work thank u so much i used jelly king rom on it and it worked DDDDD
Press thanks.