Need a kernal compatible with MHL Adapter - T-Mobile Samsung Galaxy S II SGH-T989

I am currently using the Juggernaut v5.0 rom with what i believe is a custom kernal in which it says in the following lines:
2.6.35.14-SGH-T989-faux123-009u
[email protected] #1
SMP PREEMPTSat Jan 21 18:54:48 PST 2012
My question is, i'm looking for a kernal (that is what one of the players of XDA said in the juggernaut thread) that will be compatible with my MHL adapter. It sucks because the new juggernaut rom has been uber stable with me (I don't mess with anything much) and I'd love to keep it.... But if there is no compatible non-oem kernals, i might have to go back to stock to get full capabilities back. Thanks in advance for anyone's help!
P.S. If you're going to lecture me about the search function... I've already tried

The kernel that comes with juggernaut is MHL capable.

According to a post found within the thread, no, it doesn't support MHL. I've also tried it on my personal SGS2 and it doesn't seem to work either, that's why I asked for a MHL kernal
http://forum.xda-developers.com/showpost.php?p=23089084&postcount=6335
If someone can help me figure out a kernal, i send my many thanks to you

XxGoKoUxX said:
According to a post found within the thread, no, it doesn't support MHL. I've also tried it on my personal SGS2 and it doesn't seem to work either, that's why I asked for a MHL kernal
http://forum.xda-developers.com/showpost.php?p=23089084&postcount=6335
If someone can help me figure out a kernal, i send my many thanks to you
Click to expand...
Click to collapse
It does support MHL

Can you help me figure out why it's not working for me then? because i'm lost =\ it use to be just plug n play.... are there any ROM options that i need to check? Thanks

Are you sure your MHL adapter still works? HDMI cable firmly plugged in? Power adapter?
I am on Juggernaut 5.0 with the packaged kernel and use MHL often.

I managed to get it to work, it turns out my MHL adapter has to be plugged into HDMI + Charger before i attempt to plug it into my phone. Sorry for the wasted bandwidth!
Confirmed that Juggernaut v5.0 w/ kernal works with MHL adapter! *will post this thread in the juggernaut forums for reference*

XxGoKoUxX said:
I managed to get it to work, it turns out my MHL adapter has to be plugged into HDMI + Charger before i attempt to plug it into my phone. Sorry for the wasted bandwidth!
Confirmed that Juggernaut v5.0 w/ kernal works with MHL adapter! *will post this thread in the juggernaut forums for reference*
Click to expand...
Click to collapse
dude... come on.

haha.... once again my apologies and many thanks to those who clarified it works! It was my fault, I'm still trying to get use to using the MHL adapter.... it worked on stock rom before and i don't know why it hung up on me on juggernaut rom, but it was really just because i have to plug everything in before the phone lol

the stock ROM from Samsung works with MHL without any change

Related

[Q] Salvage Mod + HDMwIn = ?

Flashing for a friend. This rom looks to be where it's at! The only deal breaker is friend uses HDMI Mirroring a lot.
Does anyone have any hands on experience with Salvage mod and HDMwIn to speak of their compatibility? I searched Salvage Mod thread and saw Lithid saying it was an issue (back in august) but would be fixed in future releases.
Normally i would flash for myself, but I dont have the luxury of doing that this time a round. Thanks for your input.

[Q] connecting Epic touch to tv through hdmi cable

I searched and searched since I couldn't find the answer I am making this post to ask for the solution mods if thread already exist that contains the answer then close delete this thread but link me the thread.
SO AFTER flashing back and forth from ics to gb to ics to gb I'm running calks 3.0 gb rom and I'm having the issue that I can't get the tv to recognise my phone after connecting to it through a hdmi mhl adapteri used to just connect it and just hit source then select my phone and done deal I would be watching my vids or playing racing games on my large screen but now I can't my phone does have the all share app .. I know that to use the all share app it requires a wifi connection but I'm using a cable directly from device to tv.. any ideas what's missing
any ideas ?
Did you remember to plug the charger to the mhl adapter?
Sent from my SPH-D710
Dont see why i need to do that i didnt have to before but when i get home i will give it a try.. Wondering whats missing on Calks rom that is installed on Blend rom cause had no issue on that rom but want to keep using this rom
Hdmi adapters need a powersource. Without that it wont work.
Sent from my SPH-D710
D1rk said:
Hdmi adapters need a powersource. Without that it wont work.
Sent from my SPH-D710
Click to expand...
Click to collapse
Wouldn't the battery of the phone be enough power source if its over 50%?
I will try that then when i get home like i said dont remember having to do that but i will give it a try hope it works.
thanks.. and if any other suggestion please let me know.
When i got mine i thought that too. Had my phone charged 100% but it didnt work until i plugged it up.
Sent from my SPH-D710
D1rk said:
Hdmi adapters need a powersource. Without that it wont work.
Sent from my SPH-D710
Click to expand...
Click to collapse
that's not necessarily true... its more like some phones require that the mhl to be powered... t mobile's galaxy ii does not require the mhl to be powered and several other phones don't require the mhl to be powered...
puff601 said:
that's not necessarily true... its more like some phones require that the mhl to be powered... t mobile's galaxy ii does not require the mhl to be powered and several other phones don't require the mhl to be powered...
Click to expand...
Click to collapse
Ive only tried it on sprint gs2. But thanks for clearing things up. :thumbup:
Sent from my SPH-D710

[Q] Stock Rom and CM10.1 Kernel?

Just registered to post this. I'm a long time lurker on the site starting back with my desire hd. I have flashed a lot of different roms and its been great. Until now. I have most recently had an HTC One X and today got the HTC ONE. I now want to sell/trade in my One X but i face this predicament: I have been using the Official CM10.1 RC on my one X until now and I have on it RC5. Recently my usb port seems to have packed in and will no longer transfer data or be recognised at all by my PC or any other computer. I want to return to stock - or at least stock based rom but I now can't go back and flash the appropriate Boot image. SO my question is: are there any sense/stock based roms that will work with the CM10.1 kernel? If anyone knows or can help that would be great.
Thanks
No, sir. It's not possible to return to stock with a busted USB connector. (Without s-off) Also there's no stock based sense ROM than would work with cm10.1 kernel.
Sorry but you gotta leave the ROM how it is.
Have you tried another cable? How about cleaning the port with compressed air?
Sent from my Nexus⁴ running Unicorns™
TToivanen said:
No, sir. It's not possible to return to stock with a busted USB connector. (Without s-off) Also there's no stock based sense ROM than would work with cm10.1 kernel.
Sorry but you gotta leave the ROM how it is.
Have you tried another cable? How about cleaning the port with compressed air?
Sent from my Nexus⁴ running Unicorns™
Click to expand...
Click to collapse
Yeah I was pretty sure this was the case - just checking if someone such as yourself with better knowledge than I might have a last ditch solution! Saw you post a similar reply in a similar thread. I guess the £160 i would get has now shrunk to £60 (recycle value). Do you think i'd be better selling on ebay than recycling?
I think you should try to sell it first. (Make it clear that the device is broken)
If nobody wants to buy, recycle it.
Sent from my Nexus⁴ running Unicorns™
TToivanen said:
I think you should try to sell it first. (Make it clear that the device is broken)
If nobody wants to buy, recycle it.
Sent from my Nexus⁴ running Unicorns™
Click to expand...
Click to collapse
Hmm just had a quick look on ebay there. Looks as though faulty devices aren't going for much any more than the £60 i've been offered - so I think i'll just recycle! Thanks for your help by the way :good:

[BOUNTY] MHL HDMI over USB out for D2ATT

This has apparently intermittently worked over the life of this device. It is currently not working with any of the latest 4.2X roms. SO, I am going to offer a USD$50.00 Bounty to anyone who adds this code to the repository of AOKP or CM10.1.
I have never offered a bounty before for anything, so if someone wants to fill in the blanks for me, feel free to do so. Nuts and bolts, is: I will put 50 bucks into this fix. If anyone else wants to add to the fund, lets put it together somehow. Escrow or something? Or just gents honor? I have a proper MHL 11 pin cord with USB Power for this device. I am technically able, just not a programmer...
Bump. Any takers or suggestions?
No takers so far. Too bad. I really wish I don't have to go back to a stock rom. PLEASE, if anyone out there can do this, more than myself would be happy, I'm sure...
so if i understand correctly, when running a custom ROM on AOSP-based 4.2.x, MHL doesn't output at all?
wish i saw this sooner to try that out. i just left CM10.1.2 to try out TW 4.1.2.
mrhomiec said:
so if i understand correctly, when running a custom ROM on AOSP-based 4.2.x, MHL doesn't output at all?
wish i saw this sooner to try that out. i just left CM10.1.2 to try out TW 4.1.2.
Click to expand...
Click to collapse
That appears to be correct. It was working with 4.1.2 as I understand, was broken in 4.2.x, I haven't tried it with 4.3.x yet, as it is still very beta for anything. If you wish for this to be fixed, add a me too to this thread, or even better, pledge a small amount (that needs to be worked out still somehow... If you have any ideas on how that could be done let me know).
Still offering this, for cm 4.3 preferably.
Slim bean thread claims working but did not for me. Please try and report back. Problems often occur with PSU or cable used.
Appetisaac said:
Slim bean thread claims working but did not for me. Please try and report back. Problems often occur with PSU or cable used.
Click to expand...
Click to collapse
I'll have a look as time permits. Enjoying AOKP ATM, but can nandroid it and go back after I try... Will post here once I try it. Thanks for the info.
mhl hdmi working d2att 4.2.2
I'm running liquid smooth 2.4 d2att (4.2.2) and I've got HDMI working after recovering from a soft brick. I think installing the "stock kernel" fixed it for me but my kernel Info still shows as lean kernel 3.4 which came with the ROM.
This is what I did first
http://forum.xda-developers.com/showthread.php?t=2314841
Obviously I wasn't reading nor did I understand what I was doing but I installed this
http://d-h.st/KhR
Which is clearly not meant for my d2att so I got the brick.
Did the SD card did trick on my 32gb SD card (my phones only 16gb and lol in that forum claimed you had to match SD size with internal storage for it to work, but it worked first try for me.)
I had to reflash the updated boot loader with Odin to fix the brick and then I was back to installing random stuff to fix hdmi
This is the "stock kernel" that got my HDMI working... Im still not sure this is a kernel or what happens when you install it over a different kernel but HDMI worked after installing
http://forum.xda-developers.com/showthread.php?t=1992483
I did a backup post brick and I'm not sure if I should tempt fate by trying out a different ROM with hopes I can get HDMI on them. Its sad but I'm not sure why no one cares to fix hdmi
I'm on cm11 by Jerome and working fine for me only problem is home screen goes portrait
Sent from my SGH-I747 using XDA Premium 4 mobile app

cm11 mhl/HDMI out working

Hello, tried searching but came up with nothing. So I'm gonna ask here. I recently updated my galaxy s3 to cm11 and noticed that HDMI/mhl, USB otg is working great. I was wondering if anyone knows if it works on our note 2??
I have a perfect stock setup going right now with no Knox trip, so I don't want to flash anything yet until I know for sure its worth it. To me MhL/hdmi is.. Thanks in advance!!

Categories

Resources