Develop Bugs

[Q] Defy stuck on Google logo wont go past it. Please help

So i installed CM 7.1 i think from rom manager but it wouldn't go past the boot logo with the skating droid. so i took battery out and went to recovery mode and i think i accidentally restored one of my Motorola Droid data and now my phone wont go past the Google CM boot logo i think I'm screwed any suggestions? please help. i guess I'm a noob and sorry if there was something similar to this posted already i just can't find the answer to my problem thank you.
additional info:
us - Tmobile
rooted with gingerbreak
2nd init boot-loader
was running perfect until i accidentally restore the wrong data
oh and yes I've tried data wipe not working

Do you happen to have a nandroid backup of your stock rom you've had before ?
A nandroid backup is what you should have created using CWM recovery. Just restore it with CWM.
You don't have a nandroid backup ?
Flash the full SBF of your original stock rom (the one you had before flashing cm7). This should be a 2.2 Froyo whatever rom. Connect defy to pc, open rsd lite, start the phone and enter the bootloader and flash the sbf using rsd lite.
Have you installed Froyo (2.2) before going to Cm7? If not (you still had Eclair 2.1) then this is the problem.
However, get 2.2 on that phone and flash cm7 again following this guide http://forum.xda-developers.com/showthread.php?t=1054447
Instructions for some of these steps can be found here: http://forum.xda-developers.com/showthread.php?t=1216982
Also, be patient! When the phone boots for the first time after a flash that may take a while!

Try wiping data cache partition and Dalvik cache from the custom recovery..
Sent from my MB525 using Tapatalk

tdlr said:
Do you happen to have a nandroid backup of your stock rom you've had before ?
A nandroid backup is what you should have created using CWM recovery. Just restore it with CWM.
You don't have a nandroid backup ?
Flash the full SBF of your original stock rom (the one you had before flashing cm7). This should be a 2.2 Froyo whatever rom. Connect defy to pc, open rsd lite, start the phone and enter the bootloader and flash the sbf using rsd lite.
Have you installed Froyo (2.2) before going to Cm7? If not (you still had Eclair 2.1) then this is the problem.
However, get 2.2 on that phone and flash cm7 again following this guide http://forum.xda-developers.com/showthread.php?t=1054447
Instructions for some of these steps can be found here: http://forum.xda-developers.com/showthread.php?t=1216982
Also, be patient! When the phone boots for the first time after a flash that may take a while!
Click to expand...
Click to collapse
thanks alot for some reason rsd lite would not detect my phone on windows 7.
this is what my phone say at the time
Software Version: N / A
Flex Version: N / A
Bootloader Version: v0x000910
DRM Version: N / A
AP Die ID: 2190001435d15e010000d8ff2100
BP Die ID: 0000000000000000000000000000
AP Public ID: 67fb0d892ad966d841afedffd5eda9e7a1261a1a
BP Public ID: 0000000000000000000000000000000000000000
I'm about to just flash froyo since that's what i had hope it works and thanks for the help i appreciate it.

crlx1906 said:
So i installed CM 7.1 i think from rom manager but it wouldn't go past the boot logo with the skating droid. so i took battery out and went to recovery mode and i think i accidentally restored one of my Motorola Droid data and now my phone wont go past the Google CM boot logo i think I'm screwed any suggestions? please help. i guess I'm a noob and sorry if there was something similar to this posted already i just can't find the answer to my problem thank you.
additional info:
us - Tmobile
rooted with gingerbreak
2nd init boot-loader
was running perfect until i accidentally restore the wrong data
oh and yes I've tried data wipe not working
Click to expand...
Click to collapse
hello sir,
i am facing the same problem with my defy. want to know have you got any solution to that. i am having nandroid backup of my froyo rom. but how to install it with CWR when the phone is not even go beyond bootscreen. i am not much familiar with android. its my first android cell. please help me sir.
waiting for ur reply

are u getting any errors while booting up?

[Q] Need help with CM7

So im planning to go back to 2.1 or 2.2 and sense, so how im going to do this? ( I have #203 Nightly)
After that, will i need to root again, and is it possible to overclock stock wildfire ROM and how? (Install new kernel??)
If youre asking why go back to sense, I just happen to need stableness for next 4 weeks and want to see how much I can tweak Sense. Going back to cm7 in november probably
Mipe

Just install like a new ROM. One such stock rooted Froyo can be found here:
http://forum.xda-developers.com/showthread.php?t=877977
The only different thing is that this will have to be flashed in Clockworkmod 2.x. (I guess you must know how to flash Radio's in CM7, so its not a big issue)
And yes, to OC, you will have to install a custom kernel like this one:
http://forum.xda-developers.com/showthread.php?t=995301

3xeno said:
Just install like a new ROM. One such stock rooted Froyo can be found here:
http://forum.xda-developers.com/showthread.php?t=877977
The only different thing is that this will have to be flashed in Clockworkmod 2.x. (I guess you must know how to flash Radio's in CM7, so its not a big issue)
And yes, to OC, you will have to install a custom kernel like this one:
http://forum.xda-developers.com/showthread.php?t=995301
Click to expand...
Click to collapse
I also found that i have cwm backup from original rom that I can restore. Does this also restore previous radio or kernel or do I have to do it manually?

it will not touch the radio, but it will restore the stock kernel. (Or whichever kernel you had installed when you took that backup)

3xeno said:
it will not touch the radio, but it will restore the stock kernel. (Or whichever kernel you had installed when you took that backup)
Click to expand...
Click to collapse
I got a problem. I want to get original Sense by restoring backup from CWM. Mine works, but has a pattern that i dont remember and a email wich i dont remember either. Does anyone happen to have a backup of a wildfire without password or could someone advice something else? I tried RUU but my win7 x64 is causing trouble, or the drivers.

Just flash the stock froyo ROM I listed in the first post I made in this thread (http://forum.xda-developers.com/showthread.php?t=877977). If you don't know how to get Clockworkmod 2.5.0.x, then:
- Download this attachment, place on your SDCard:
http://forum.xda-developers.com/attachment.php?attachmentid=662193&d=1311319218
- Flash the zip (update1.zip) using your existing Clockworkmod 5.0.2.0
- Device will reboot and will start Clockworkmod 2.5.0.7
- Perform Data Wipe and Choose Install Zip from SDCard, select the ROM Zip file, and let it install.

3xeno said:
Just flash the stock froyo ROM I listed in the first post I made in this thread (http://forum.xda-developers.com/showthread.php?t=877977). If you don't know how to get Clockworkmod 2.5.0.x, then:
- Download this attachment, place on your SDCard:
http://forum.xda-developers.com/attachment.php?attachmentid=662193&d=1311319218
- Flash the zip (update1.zip) using your existing Clockworkmod 5.0.2.0
- Device will reboot and will start Clockworkmod 2.5.0.7
- Perform Data Wipe and Choose Install Zip from SDCard, select the ROM Zip file, and let it install.
Click to expand...
Click to collapse
For the rooted ROM it says No Hboot | No Radio, what does that mean?

jediknight111 said:
For the rooted ROM it says No Hboot | No Radio, what does that mean?
Click to expand...
Click to collapse
Just what is says. It does not include the Bootloader (HBoot), and it does not include the baseband (Radio). So, for these two components, what you are having on your device at this moment will remain. (ie - They will not be updated when you flash the ROM)

3xeno said:
Just what is says. It does not include the Bootloader (HBoot), and it does not include the baseband (Radio). So, for these two components, what you are having on your device at this moment will remain. (ie - They will not be updated when you flash the ROM)
Click to expand...
Click to collapse
I Installed the Rom from recovery, but all I get is the HTC logo and the startup tone then it switches off and I get the same thing again. Help please!
Edit: It's working now but I cannot force move apps like I could do before. Why is that?

jediknight111 said:
I Installed the Rom from recovery, but all I get is the HTC logo and the startup tone then it switches off and I get the same thing again. Help please!
Edit: It's working now but I cannot force move apps like I could do before. Why is that?
Click to expand...
Click to collapse
Because it is a Completely Stock HTC Factory ROM with no support for it.

[Q]Creating a backup before I root my GIO

hello, i just got my first android phone so I'm new to this sort of stuff, though I love being able to unlock hidden potential of different devices, so naturally I discovered the ability to root smart phones and all that good stuff.
The model I have is the Samsung Galaxy Gio GT-S5660M. It's running 2.3.4. Gingerbread version.
I've been reading a lot of guides and for the most part rooting and adding additional utilities like flash, etc. seems pretty simple. However, I have not yet been able to find out how to create a back of up of my stock firmware when I bought the phone in case I end up bricking it, or decide I want to return to stock.
I've read many guides that claim to show how to create back ups and recovery points, but I'm still having trouble understanding it.
To be more specific, I would like to create as opposed to download, a back up of the phone in it's current state which is, as I said earlier, stock. I did a factory reset since I had some stuff installed while I was fiddling with it for the first time.
thx

You have to root it before you can back up stock rom so, firstly you root it (you can find guides here on xda)
Then install clockworkmod recovery: warning: DON'T EVER USE ROM MANAGER TO INSTALL CLOCKWORKMOD ON YOUR GIO, IT WILL BRICK YOUR PHONE!! use one of the recoveries found in xda, you will also find guides to install them there.
Then third; backup in clockworkmod using "backup and restore"
Sent from my GT-S5660

iok1 said:
You have to root it before you can back up stock rom so, firstly you root it (you can find guides here on xda)
Then install clockworkmod recovery: warning: DON'T EVER USE ROM MANAGER TO INSTALL CLOCKWORKMOD ON YOUR GIO, IT WILL BRICK YOUR PHONE!! use one of the recoveries found in xda, you will also find guides to install them there.
Then third; backup in clockworkmod using "backup and restore"
Sent from my GT-S5660
Click to expand...
Click to collapse
so first of all, what I'm looking for is called a ROM right?
what I don't get though is how come I need to modify the device before creating the backup. Isn't the phone modified at that point? Or is the stock configuration being stored somewhere on the phone that I can't see without clockwork?

You cannot create a backup without the recovery mod CWM Clockwork Recovery Mod. But to install this you need your device rooted (modified so you can modify and view system files)

gfyrdr said:
so first of all, what I'm looking for is called a ROM right?
what I don't get though is how come I need to modify the device before creating the backup. Isn't the phone modified at that point? Or is the stock configuration being stored somewhere on the phone that I can't see without clockwork?
Click to expand...
Click to collapse
1 - you don't need to search for a rom to backup your stock rom
2 - you need to root your phone in order to be able to backup your rom
3 - you need to install a more advanced recovery (program "similar" to pc BIOS) in order to do a nandroid backup
4 - after you flash that more advanced recovery (aka CWM -> ClockWorkMod), you backup your rom in "backup and restore" menu, backup. It will then store your rom in a folder.
5 - you should strongly consider after that, to install a custom rom made by many of the devs here on XDA in order to have a better experience with your phone...

0M3G4_ said:
1 - you don't need to search for a rom to backup your stock rom
2 - you need to root your phone in order to be able to backup your rom
3 - you need to install a more advanced recovery (program "similar" to pc BIOS) in order to do a nandroid backup
4 - after you flash that more advanced recovery (aka CWM -> ClockWorkMod), you backup your rom in "backup and restore" menu, backup. It will then store your rom in a folder.
5 - you should strongly consider after that, to install a custom rom made by many of the devs here on XDA in order to have a better experience with your phone...
Click to expand...
Click to collapse
+1 That was what I wanted to say

I've already uploaded a stock ROM backup last fall of the same Gingerbread ROM you're running, along with instructions on how to make one yourself or flash mine.
The best advice I can give you is: research, research, and more research.
Good luck,
Darkshado
Sent from my Nexus S using XDA

What software do you recommend to clockworkmod Gio with?

s!mon said:
What software do you recommend to clockworkmod Gio with?
Click to expand...
Click to collapse
I use px-cwm-v2.zip recovery.
You flash it using stock recovery.

thx for the replies. I will give it a try.
Darkshadow, whats the thread's name where you posted the ROM and instructions? I'd like to check that out too.
Also, whats a good rom to consider upgrading to? Something that has the ability to play flash videos.
EDIT:
If I understand correctly, roms are basically whole operating systems that have been customized by the developer. So a rom can be already rooted and have clockwork as well as other custom stuff, and I just need to flash it. The alternative to this is to do everything manualy... root the current OS, add clockwork and whatever else. Correct?
Also, I'm not sure yet if a rooted phone has any extra options on it's own, or if it's only a set up that's sole purpose is to allow other applications to be installed who then will give the user better control over his device.

I've run into a little problem.
I'm following this guide: http://forum.xda-developers.com/showpost.php?p=16963172&postcount=1
I've got Odin and the tar downloaded, but when I go into download mode with my phone and connect it to the PC, it says that the device driver was not successfuly installed, and I get no confirmation in Odin that a connection has been made between the phone and the program.
What am I missing?
Thx.
EDIT:
Nevermind, I needed to install Kies. Don't even need to run it. Apparently it has the driver that's needed.

Okay, I've rooted my phone successfully. Now the next step is to install Clockwork and create a back up.
Now that I understand a little bit the way Odin and flashing ROM works, I think it would be better to just download a stock ROM and in case something goes wrong, I can just flash it the way I flashed the rooted one.
(I think I saw a completely stock ROM somewhere for my model but I don't remember where. A link would be appreciated if it exists.)
Correct me if I'm wrong pls.
Also, if I do that, then is there any reason to install Clockwork since I've read that many ppl have issues with installing it and it's riskier than rooting or installing other software.
Right now I think what I'm most interested in is installing Adobe Flash Player 11 or something of the sort that can play flash videos and streams.

^
http://forum.xda-developers.com/showpost.php?p=19623732&postcount=1
taken from the sticky
i'm also thinking of installing cwm
looking at the sticky, http://forum.xda-developers.com/showpost.php?p=20397988&postcount=8
how outdated is this cwm?

I'm using Opera as my browser so from what I've learned, flash doesn't work with it period. Is skyfire a good alternative?
Also, like I said, I don't think I need the clockwork if I can get a clean stock ROM that I can just flash if something goes wrong. As I don't intend to download many apps or add many phone numbers (memorized instead), a backup isn't really needed.

nvmd, i just went ahead and installed the cwm in that link, there's a 5.0.2.7 though if that is even the newest one
now, i cant seem to backup my phone
it says it cannot mount /system
try dolphin browser

anonxlg said:
nvmd, i just went ahead and installed the cwm in that link, there's a 5.0.2.7 though if that is even the newest one
now, i cant seem to backup my phone
it says it cannot mount /system
try dolphin browser
Click to expand...
Click to collapse
Did you pick the ext4 + rfs version?
Sent from my GT-S5660

Clockwork is not riskier than other things you do. Just follow steps and you see no problems.

anonxlg said:
^
http://forum.xda-developers.com/showpost.php?p=19623732&postcount=1
i'm also thinking of installing cwm
looking at the sticky, http://forum.xda-developers.com/showpost.php?p=20397988&postcount=8
how outdated is this cwm?
Click to expand...
Click to collapse
its an older version, its 5.0.2.7, theres also 5.0.2.8 but these give some problems after installing/wiping, so some people still use the older version.

Hello guys,
I'm new here. I have the same problem as anonxlg. It says can't mount system. I also used the version from the big thread for new users. Can anyone enlighten me on what to do? I've been searching the forum and google, but can't make it work. I feel like a compleet noob now, and I don't feel special about it.
RJ88
Edit: I kept searching, and finally found a working 5.0.2.7 version. First I had another 5.0.2.7 version, but when I tried to install it didn't work. I finally found "signed_cwm-5.0.2.7-flashablezip-ext4+rfs.zip (Flash from Recovery)" on http://forum.xda-developers.com/showthread.php?t=1421650 (through google actually. I have to get used to this site), and I'm making my backup now.

thanks RJA88, backup worked
edit/update
i used the cwm linked and backup worked, i tried installing cm9 beta8 (galaxyics), and it would get stuck after samsung bootscreen (it flashes a white pick or soemthing before full back screen)
i tried restoring backup i made, and it didnt work, some mount error again
i reverted back to 5.0.2.6 and did the restore backup again, and this time it goes up the the galaxy gio gt5660m screen and just stop..
note that i do not know what the rfs/ext4 is for for the gio if that is what is causing problems

[Q] Any advice for me towards installing Custon ROM's

Hey everyone.
I own a Samsung Galaxy Gio GT-S5660M With Android 2.3.4 Gingerbread that I got from Bell Aliant Along With a Motorola Xoom Wifi Canadian That I bought at Wal-Mart one day.
I am intrested in flashing Custom Roms onto My Samsung Galaxy Gio Gt-S5660M. I have Rooted and Installed ClockworkMod on my Samsung Galaxy Gio Gt-S5660M. I have recently been looking up stuff on how to install them onto my Samsung Galaxy Gio Gt-S5660M. I recently attempted to install Android 4.0.3 Ice cream Sandwich onto it. and I realized that I installed the wrong one because it was for the S5660M Model Not the GT-S5660M, Resulting into a boot failure. as the screen would fade out to black when booting to the Operating System. I was still able to access the Recovery mode (I never Had ClockworkMod Installed at that time) and the Custom ROM Download mode (Vol Down + Home + Power button) but it would fail to connect to my PC (Windows 7 Home Premium & Ubuntu Linux 64-bit) So Later on I told my dad about it and he sent it to bell Aliant to get it fixed. And now I would like to know how I can install a custom ROM and If I ever come across this problem again, how can i solve it without taking it to Bell Aliant to get fixed (Since it's a software related issue)
Thank You For reading and I hope to hear a reply for someone.

When you flash a rom it is very important to do a backup before hand. You sound like your new to this so your in the right place. Whenever you do a back up and you run into a problem like the one you ran in to, it's very simple to restore back to its original state. Also, most companies won't cover software issues once they figure out your rooted. So you might run in to a problem with your company. My advice is to read read read read and ask as many questions as possible before doing anything to your phone you aren't sure about.
Sent from my SGH-T989 using xda premium

Some more things, it is very useful for you to download ROM MANAGER and TITANIUM BACKUP from the app store. These two apps are life savers when you run in to the problem you had. Also read on how to use clock work mod recovery. Try to get very acquainted with that program as it will be ure main life saver in any situation.
Sent from my SGH-T989 using xda premium

help to reistalled stock rom 2.3.6
i have gio updated to 2.3.6 from samsung kies. then i flash CM9 nightly on 12 jun-2012.
i m new to this and made a mistake did not creat backup.
now i wana reinstall gingerbird 2.3.6.
plz help me... plzzzz

[email protected] said:
i have gio updated to 2.3.6 from samsung kies. then i flash CM9 nightly on 12 jun-2012.
i m new to this and made a mistake did not creat backup.
now i wana reinstall gingerbird 2.3.6.
plz help me... plzzzz
Click to expand...
Click to collapse
hold the power button, the volume down button, and the HOME button at the same time, when the phone is off. then use a tutorial on how to flash roms with ODIN, download a rom from sammobile.com

Here's some ROM's that I am interested in installing:
http://forum.xda-developers.com/showthread.php?t=1414173&page=435
http://forum.xda-developers.com/showthread.php?t=1659450
http://forum.xda-developers.com/showthread.php?t=1708383
Would I install them something like this?:
1. Download & Place this rom on your root sdcard
2. Go to recovery mode
3. Install zip from sdcard, install rom (cwm) | Install menu, install rom (RZR)
4. Wait till installation completed
5. Reboot
7. Reboot & Play
also about Rom Manager, I read this Thread:
http://forum.xda-developers.com/showthread.php?t=1706999
but I can't get the "GT-s5660m" Option to show up on it. Maybe it's the M on the end of it

After the installation is finished, you need to do a factory reset, then reboot.
Otherwise you cant boot.
And for cm9 it may be required to have atleast a gingerbrea2.3.x rom
Sent from my GT-S5660 using xda premium

Vzqsmooth56 said:
Some more things, it is very useful for you to download ROM MANAGER and TITANIUM BACKUP from the app store. These two apps are life savers when you run in to the problem you had. Also read on how to use clock work mod recovery. Try to get very acquainted with that program as it will be ure main life saver in any situation.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Rom manager isnt good for the new ones, cause they will probably end up with a nice brick to throw at you
Sent from my GT-S5660 using Tapatalk.
P.S.
If I helped you in some way hit it!

(Frank) said:
Rom manager isnt good for the new ones, cause they will probably end up with a nice brick to throw at you
Sent from my GT-S5660 using Tapatalk.
P.S.
If I helped you in some way hit it!
Click to expand...
Click to collapse
Its Not bad for new phones, for new people, as they dont know how to use it..
Sent from my GT-S5660 using xda premium

voetbalremco said:
Its Not bad for new phones, for new people, as they dont know how to use it..
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
With new ones I was actually talking about "people"
Sent from my GT-S5660 using Tapatalk.
P.S.
If I helped you in some way hit it!

voetbalremco said:
After the installation is finished, you need to do a factory reset, then reboot.
Otherwise you cant boot.
And for cm9 it may be required to have atleast a gingerbrea2.3.x rom
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
I have Android 2.3.4 on it will that work?
Also how can I backup my Stock rom on it as well.
I noticed a backup and restore option in Clockworkmod as well (I have Version 5.0.2.6) Will that work incase I mess up again?

First of all, do not use ROM Manager to install CWM, you will brick the device doing so.
The nandroid backup function in CWM should work, but having a working Odin install with your Odin-flashable stock ROM backup is always a nice plus.
While I don't have one personally, there have been reports on here of the same USB jig (a micro USB connector with the appropriate resistor between pins 4 and 5) used on the Galaxy S Vibrant working on the Gio as well. This is if it doesn't want to go into download mode anymore.
These are a few gotchas with flashing ROMs on the Gio I can think of right now:
-Don't flash the Euro baseband on the 5660M and vice versa. (The AMSS image in Odin tar files)
-Be sure to have your partitions in the appropriate file system format, and CWM to go with it. I'm talking about ext4 and Samsung's stock, and proprietary RFS format.
If you have the usual MUGK3 stock ROM all Canadian 5660Ms have been delivered with, install CWM (via Odin, or with root and the dd command), format to ext4 and install the latest CM9 nightly zip file. Nothing more to it really.

Darkshado said:
First of all, do not use ROM Manager to install CWM, you will brick the device doing so.
The nandroid backup function in CWM should work, but having a working Odin install with your Odin-flashable stock ROM backup is always a nice plus.
While I don't have one personally, there have been reports on here of the same USB jig (a micro USB connector with the appropriate resistor between pins 4 and 5) used on the Galaxy S Vibrant working on the Gio as well. This is if it doesn't want to go into download mode anymore.
These are a few gotchas with flashing ROMs on the Gio I can think of right now:
-Don't flash the Euro baseband on the 5660M and vice versa. (The AMSS image in Odin tar files)
-Be sure to have your partitions in the appropriate file system format, and CWM to go with it. I'm talking about ext4 and Samsung's stock, and proprietary RFS format.
If you have the usual MUGK3 stock ROM all Canadian 5660Ms have been delivered with, install CWM (via Odin, or with root and the dd command), format to ext4 and install the latest CM9 nightly zip file. Nothing more to it really.
Click to expand...
Click to collapse
I am not going to use ROM Manager to begin with. as my device is not listed.
I used the recovery to install Clockworkmod (CWM)
Also I noticed that some ROMs are strictly for S5660M Not the GT-S5660M.
If I want to Install a Rom That For the GT-S5660 Does it Matter if it has the "M" in the name of my model? as in GT-S5660M
Also is it possible to flash zip files with odin?
Or has the ROM only have to be in tar format?

One last thing
Well, Before I start flashing (Because I'm pretty close to knowing now)
I am going to post 5 final questions before I begin:
1) Does it matter about my Model code for a ROM?
EX: ROM Made for the S5660 or GT-S5660 And I want to Install it on my GT-S5660M
2) If I Come across the problem I had earlier that caused me to take it to bell to get it fixed, Will the Nandroid Backup & Restore fix it?
3) Is it possible to mess up installing a ROM that the phone is inaccessible to the Recovery & ROM Flasher?
4)If I forget to Factory reset my phone while installing a ROM, can I go back to the recovery and factory reset and reboot?
5)If I Choose to install this ROM:
http://forum.xda-developers.com/showthread.php?t=1414173
Can I install it on my GT-S5660M since I have Android 2.3.4?
If I Choose the Other 2 I mentioned:
http://forum.xda-developers.com/show....php?t=1659450
http://forum.xda-developers.com/show....php?t=1708383
Does it Matter what version of Android I have?
Once These questions are answered I will begin Installing Custom ROMs onto my GT-S5660M

Super Liam said:
Well, Before I start flashing (Because I'm pretty close to knowing now)
I am going to post 5 final questions before I begin:
1) Does it matter about my Model code for a ROM?
EX: ROM Made for the S5660 or GT-S5660 And I want to Install it on my GT-S5660M
2) If I Come across the problem I had earlier that caused me to take it to bell to get it fixed, Will the Nandroid Backup & Restore fix it?
3) Is it possible to mess up installing a ROM that the phone is inaccessible to the Recovery & ROM Flasher?
4)If I forget to Factory reset my phone while installing a ROM, can I go back to the recovery and factory reset and reboot?
5)If I Choose to install this ROM:
http://forum.xda-developers.com/showthread.php?t=1414173
Can I install it on my GT-S5660M since I have Android 2.3.4?
If I Choose the Other 2 I mentioned:
http://forum.xda-developers.com/show....php?t=1659450
http://forum.xda-developers.com/show....php?t=1708383
Does it Matter what version of Android I have?
Once These questions are answered I will begin Installing Custom ROMs onto my GT-S5660M
Click to expand...
Click to collapse
1 .zip files that you flash via recovery can be flashed easily, thats fine
Just watch out with odin roms like gioprio, they contain a baseband and you will have no service, but can easily be solved by flashing a m model baseband
2 I think not
3 no, unless you do it terribly wrong
Flashed 20+ roms and nothing bricked
4 yes.
Make sure partitions are ext4.. This can be done with ext4formatter zip or installing for example cm7 rom first, than cm9.
Just stay on gingerbread, android 2.3 or higher
2.3.3 or 2.3.4 doesnt make a difference
Sent from my GT-S5660 using xda premium

4 yes.
Make sure partitions are ext4.. This can be done with ext4formatter zip or installing for example cm7 rom first, than cm9.
Just stay on gingerbread, android 2.3 or higher
2.3.3 or 2.3.4 doesnt make a difference
Click to expand...
Click to collapse
So you're saying that I should install Cm7 and then CM9?
Would It matter if I choose CM7 or CM7.2?
and you're also saying I should install a ROM that has Android 2.3.X instead of one with Android 4.0.X?
OH! I forgot to ask one last question:
Where can I get a Stock ROM For my GT-S5660M?
Can I get it off my phone or would I have to download it off a website?
Yea I know I may asking a lot of questions, I just want to know how I can install a ROM properly without bricking it.
as for the last 2 ROMs i mentioned earlier, the process is the same eh?
I just need the most information that I can get.

Hi there.
There is a compiled list of all ROMs for the 5660 and 5660m Gio in the development area.
the Stock Rom for 5660M (The GT is nothing to worry about) is this link
http://forum.xda-developers.com/showthread.php?t=1385874
There are a few other custom roms made only for the 5660M.
You can absolutely use a rom that is s5560, but note:
If you are selecting a Rom that is flashed using odin, always open the .tar using winzip or 7zip and just check for a file called amss ... this is the broadband file which would cause you to lose your phone signal. if you want to use the ROM, remove that amss file.
is you are flashing a rom through clockwordmod, these don't change the broadband.
so you can freely use any of those ones, such as cm7, 7.1, 7.2 9 or other based on stock roms.
Cyanogenmod (cm) requires the internal file system to be ext4, where as most Rom based on stock can use either rfs (stock file system) or some do support ext4 internal for a bit of increased speed.
also check out this site
http://android.phiexz.com/device/galaxy-gio.html
if you need additional memory for more apps, there are such things as a2sd, link2sd and s2e you can research...

bdasmith said:
Hi there.
There is a compiled list of all ROMs for the 5660 and 5660m Gio in the development area.
the Stock Rom for 5660M (The GT is nothing to worry about) is this link
http://forum.xda-developers.com/showthread.php?t=1385874
There are a few other custom roms made only for the 5660M.
You can absolutely use a rom that is s5560, but note:
If you are selecting a Rom that is flashed using odin, always open the .tar using winzip or 7zip and just check for a file called amss ... this is the broadband file which would cause you to lose your phone signal. if you want to use the ROM, remove that amss file.
is you are flashing a rom through clockwordmod, these don't change the broadband.
so you can freely use any of those ones, such as cm7, 7.1, 7.2 9 or other based on stock roms.
Cyanogenmod (cm) requires the internal file system to be ext4, where as most Rom based on stock can use either rfs (stock file system) or some do support ext4 internal for a bit of increased speed.
also check out this site
http://android.phiexz.com/device/galaxy-gio.html
if you need additional memory for more apps, there are such things as a2sd, link2sd and s2e you can research...
Click to expand...
Click to collapse
About this Ext4formatter.zip that voetbalremco mentioned, where can I get it to, would I do this before installing the rom or after installing the ROM?
I know that I need to wipe cache partition, factory reset, and wipe Dalvik cache.
Would I do all of this first or after installation?
Like I said earlier I'm sorry for asking a lot of questions, I just need to most information I can get. lol

Super Liam said:
About this Ext4formatter.zip that voetbalremco mentioned, where can I get it to, would I do this before installing the rom or after installing the ROM?
I know that I need to wipe cache partition, factory reset, and wipe Dalvik cache.
Would I do all of this first or after installation?
Like I said earlier I'm sorry for asking a lot of questions, I just need to most information I can get. lol
Click to expand...
Click to collapse
Exformatter.zip
You use it before installing, same thing with the wipes.
By the way, this ext4formatter is a one time event.
Once it is done, its done.
The wiping is every time before you install a different rom.

WOOT!!!!!
I got CyanogenMod 7.2 sucessfully installed!!!
Thank you guys so much!!
Also I have a question:
If I ever want to upgrade from CyanogenMod 7.2 to CyanogenMod 9, How would I do it?

[Q] Can I return to stock Koodo?

Hey guys/gals,
I recently bought a Koodo Galaxy s2x. After a few weeks I looked online and saw that there were some JB Roms for my phone. I couldn't resist and tried to flash one after rooting. I didn't have many problems with it, but there were some glitches that started to bug me, so I decided to see about going back to stock (I should have done this first I know). So then after hours(many) of searching, the best I could find was a T-Mobile stock Rom I decided to try and flash it (both times via odin). I also read somewhere that I should use darkside superwipe to clear my cache, so I tried that, but ever since that CWM stopped working on my phone. anytime I tried to do any back up or anything it just froze, and I had to hard boot. Finally I just tried flashing T-Mobile stock ICS, and Odin said "Failed". I decided to just unplug my phone, as I thought I already screwed it up, but after rebooting, the T-mobile Rom worked. I don't understand why it works fine if the Flash Failed. Now, I can no longer connect to kies (I'm hoping official JB will be shipped soon!), and I am wondering if I can somehow return to a stock Koodo Rom, and if it will connect to Kies again, as it previously had. I have looked a lot and have not found anything that I fully understand. I'm not overly experienced, which is why I should not have flashed to begin with. This is the closest thread I have found to help me, but I don't fully understand what all I need to do:
"Haven't seen anyone shared this yet.
Here's the KOODO ICS 4.0.4 stock ROM I used CWM to flash to stock after I tried the custom ROM.
h t t p s : / / sourceforge.net/projects/koo...d.zip/download
I also flashed DARKSIDE.SUPER.WIDE before I flashed this or you can used CWM Recovery 6.0.1.2 to wipe system and cache."
Is it possible for me to get back to stock phone? and still connect to Kies? and then possibly upgrade to JB through Kies if Hercules ends up receiving it?
Thanks for any help you can give me. Here is all my current phone info incase this helps:
Model:
SGH-T989
Android Version:
4.0.3
Baseband version:
T989DTLLG2
Kernel version:
3.0.8-perf-T989UVLE1 -CL508451
[email protected] #1
SMP PREEMPT Sun May 6 15:07:07 KST 2012
Build number:
IML74K.UVLE1
Thanks.

If your ultimate goal is to get Jellybean on your phone, check the development section of this subforum. There are numerous stable and wonderful JB roms (AOKP Milestone 6, Liquid Smooth, CM10).
To get back to your stock ROM, download it from here: https://sourceforge.net/projects/koo...d.zip/download
Then, go into recovery (NOT odin), and flash the rom.

arcsine said:
If your ultimate goal is to get Jellybean on your phone, check the development section of this subforum. There are numerous stable and wonderful JB roms (AOKP Milestone 6, Liquid Smooth, CM10).
To get back to your stock ROM, download it from here: h t t p s ://sourceforge.net/projects/koo...d.zip/download
Then, go into recovery (NOT odin), and flash the rom.
Click to expand...
Click to collapse
That link doesn't work, it says cannot find page. Also, my phone is currently not rooted, does it have to be rooted to flash from recovery? if not what do I do to flash from recovery? I know how to get into recovery, but after that do I use 'apply update from external storage'? Do I have to wipe the cache first?
Thanks.
PS: I just want to be able to get back to stock for now. At least until I learn more about flashing Roms. There is still lots for me to learn, like kernels, radios, Nightly's for official Roms, or even how to properly flash a rom without feeling lost. If I know a way to get back to stock comfortably, It will give me more reason to try some other Roms (once I learn how).

Here is a working link to the stock Koodo ROM: http://sourceforge.net/projects/koodostock/files/KOODO_SGH-T989D_Stock_Signed.zip/download
Are you running a custom ROM right now or your stock ROM? If you're running a custom ROM, it should come with root privileges. If you are running the stock ROM, you can just back it up instead of needing to download the zip from sourceforge. This guide will help you get rooted: http://galaxys2root.com/t-mobile-galaxy-s2/how-to-root-icsgb-on-t-mobile-galaxy-s2-sgh-t989/. After rooting, get into recovery mode (if you can't get the button combinations to work, there is an app. called quick boot which reboots you into recovery/bootloader/etc). If you don't have a recovery or it's corrupt, download ROM manager from google play, and choose the 'install clockwork recovery'. Reboot to recovery to make sure it works, then uninstall rom manager (it's been known to cause bugs if you use it for other things - and I'd recommend other recoveries such as TWRP but it's a bit more advanced). From your recovery's screen, there should be a backup option. Make a complete backup and name it something appropriate. To flash a ROM, download it and put it on your storage drive. Reboot to recovery, and go to wipe. Wipe your data (factory reset), and system (only really need to wipe data in most cases, but be safe). To flash the custom ROM now (or flash the default ROM I just linked), there should be an option to 'install zip from sd card' or something similar. Choose that, browse to your ROM and install it. After installing, go to wipe and wipe your cache+dalvik cache, then reboot. There are several beginner guides sticked in the development forum, along with explanation of terms like radio/kernel/nightly/etc.

arcsine said:
Here is a working link to the stock Koodo ROM:
Are you running a custom ROM right now or your stock ROM? If you're running a custom ROM, it should come with root privileges. If you are running the stock ROM, you can just back it up instead of needing to download the zip from sourceforge. This guide will help you get rooted:. After rooting, get into recovery mode (if you can't get the button combinations to work, there is an app. called quick boot which reboots you into recovery/bootloader/etc). If you don't have a recovery or it's corrupt, download ROM manager from google play, and choose the 'install clockwork recovery'. Reboot to recovery to make sure it works, then uninstall rom manager (it's been known to cause bugs if you use it for other things - and I'd recommend other recoveries such as TWRP but it's a bit more advanced). From your recovery's screen, there should be a backup option. Make a complete backup and name it something appropriate. To flash a ROM, download it and put it on your storage drive. Reboot to recovery, and go to wipe. Wipe your data (factory reset), and system (only really need to wipe data in most cases, but be safe). To flash the custom ROM now (or flash the default ROM I just linked), there should be an option to 'install zip from sd card' or something similar. Choose that, browse to your ROM and install it. After installing, go to wipe and wipe your cache+dalvik cache, then reboot. There are several beginner guides sticked in the development forum, along with explanation of terms like radio/kernel/nightly/etc.
Click to expand...
Click to collapse
Thanks a ton... Worked perfectly! I'm hoping it will connect to Kies once again.. I'll let you know if it works.
Unfortunately, I still can't connect to Kies.. It just sits at the Loading status (for like 10-15 mins). But At least I don't have all of the T-mobile apps and stuff anymore!