Ello guys.
My htc is freezing and reboot constantly, is rooted with ics 4.0.3 rom kang... please help me guys...
Sorry forma my bad english
Sent from my PC36100 using XDA App
Try wiping cache & dalvik cache then changing kernel. If that don't work, wipe everything except for sdcard then reflshing the rom.
Sent from a Nifty Tomatoe
Hit that thanks button if I managed to help
Wipe full everything cache and dalvik cache, reflash rom and nothing...
Sent from my PC36100 using XDA App
Maybe an application you have installed? Try a clean install without downloading apps.
Sent from a Nifty Tomatoe
Hit that thanks button if I managed to help
orgasmico said:
Wipe full everything cache and dalvik cache, reflash rom and nothing...
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
You tried a different kernel right?
Sent from a Nifty Tomatoe
Hit that thanks button if I managed to help
I was having the same problem with the Smartass govenor.
Change it in SetCPU to performance and see if that works.
xNotta said:
I was having the same problem with the Smartass govenor.
Change it in SetCPU to performance and see if that works.
Click to expand...
Click to collapse
my present kernel is tiamat 4.0... maybe other kernel ???? which kernel???
and not tested SetCPU i need try this...
I saw ur on ics right now there is only one kernel tiamat 4.1.0 modified so u need to try changing governers or install your apps one at a time from a clean install and find the culprit
We are legion, for we are many
Reboot
Does it reboot after a clean flash? or only after you load apps / restore data?
Like was stated:
Wipe Full
Wipe Cache
Wipe dalvik
Flash Rom
I had no reboot issues, just standard ICS bugs.
Maybe try to download again and then flash?
I'm flashing the Tom with indicate instructions but the reboot continue.
Although, changed the rom miui and run best, changed setcpu at performance and good... the reboot is less.
Only try change to kernel, Wich kernel improve my phone?
Tanks.guys
Sent from my PC36100 using XDA App
Hey,
Give it a full wipe "Data Davlik and Cache" and try flashing a differnt rom and see if that gives you any different result.
Did you flash a different kernel or are using any tweaks or mods OC or anything like that?
Because they have been known to cause reboots if not used right.
Stevo
Tanks for you opinion. With miui rom not reboot to much, I think that this rom is the best choice for me.
But with other kernel must be run best...
Sent from my PC36100 using XDA App
Related
What is up ppl I just want ur opinion in what's the best kernel for the rom ellite 3 and im new in this but can u tell me also how to put then toooo
Sent from my PC36100 using XDA App
rene009 said:
What is up ppl I just want ur opinion in what's the best kernel for the rom ellite 3 and im new in this but can u tell me also how to put then toooo
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Finding the best kernel is trial and error, at best. Everyone's device reacts differently, and the only way to find out is by flashing some different kernels, and seeing how your device runs with it. I have great luck with netarchy's kernel's, found here http://forum.xda-developers.com/showthread.php?t=719763.
Also, give Ziggy's a try. www.ziggy471.com
To install a kernel, download it, and place it on the main directory of your sd card. Boot into recovery. I suggest creating a nandroid backup of your working system, in case you have problems with the new kernel, you can restore back to a working setup. Once you make you're backup, wipe the cache, and dalvik cache, using your recovery. You then select 'flash zip from sd card', and then select your kernel. Allow it to flash, then reboot when done. The first reboot after wiping cache and dalvik cache can take twice as long as normal, be patient. Give the new kernel a few days to settle in and test, before you pass judgement on it. Good luck.
Just like buckley said. It's trial and error. I'm running the same Rom and using nets 4.2.1 (aka 131) and its the best I've found for my phone.
Sent from "The EVO" using XDA Premium
i find that the nightly build is cool and is awesome. the problem is when i use system panel task manager, the phone reboots. i dont know why and its more laggy than the cm7 mod please tell me its me doing something wrong not my phone's or the mod's fault.
and it svery irritating that it keeps hanging. please someone help me with the nightly mod thing i want to use.
Go for nightly#205. And do a full wipe including data,cache,dalvic cache, and perform a factory resetting from cwm before you flash the nightly. Also use latest buzz kernal so that you can overclock your phone.
Sent from my HTC Wildfire using XDA App
I know how to clear data and cache from clockwork mod. How to clear devik. Ache and factory reset from clockwork mod. And the kernel from where? Can please tell me and post link for kernel?
ongtengjun said:
I know how to clear data and cache from clockwork mod. How to clear devik. Ache and factory reset from clockwork mod. And the kernel from where? Can please tell me and post link for kernel?
Click to expand...
Click to collapse
i had problem with my previous nightly # 177 when i used darktremor APP2SD script .. even when i re flashed nightly #205 .. things were the same (Talking about random reboots upon opening task manager / and installing apps etc. ) ..
then i repartitioned my SD and didn't flashed the script... now its fine .. ..
so how did you install it? how to repartition sd card and not flash the script? how to install?
V0odo0 said:
i had problem with my previous nightly # 177 when i used darktremor APP2SD script .. even when i re flashed nightly #205 .. things were the same (Talking about random reboots upon opening task manager / and installing apps etc. ) ..
then i repartitioned my SD and didn't flashed the script... now its fine .. ..
Click to expand...
Click to collapse
Lol you may have used beta 4 script, try beta 3, need to use atleast ext3 as your secondary partition. Try it with latest original cwm recovery. 5.xxx to partition. Do a clean install after partition.
And a personal suggestion. S2e app in market is good than dta2sd, though it have not much functions, but what it have, it does its best. I use it.
Sent from my HTC Wildfire using XDA App
ongtengjun said:
I know how to clear data and cache from clockwork mod. How to clear devik. Ache and factory reset from clockwork mod. And the kernel from where? Can please tell me and post link for kernel?
Click to expand...
Click to collapse
Dude, explore options in cwm, don't do formatting boot, system, data, unless you learn what it does.
Options may vary from version to versions of cwm. So you have to say which cwm version you have. Mine is latest 5.xxx.
In it, data- factory format( user data or wipe user data, which ever it is called) is in main menu. And dalvic cache wipe is in advanced menu.
Lol you must carefully read topic named" complete wildfire index, then ask doubts, after all you can learn new things from every topic.
Your kernal will be in that topic. Check it out.
Sent from my HTC Wildfire using XDA App
another problem
now i got another problem. my wildfire will hang every now and then and i have to pluck out the battery and switch it back on. its very irritating and having to keep doing that will kill my bat very quickly so could anyone tell me any solutions?
To solve your problem, you must say. Your current configuration, rom, kernal, radio, tweeks, and what have you done just before you got the error
Sent from my HTC Wildfire using XDA App
well i am using the cm7 nightly build #205. kernel is buzz-kernel-2.6.35. i just downloaded some apps that were in my phone when i was using cm7 stable. and there wasnt a problem. do i have to upgrade to latest build and kernel? oh and just a question. if i want to upgrade from #205 to #208, do i have have to like wipe my data and cache and dalvik cache? i wouldnt wanna redownload and change everythin again
You can install the nightlies on top of one another without wiping anything, sometimes it seems better to wipe the cache to me but not always necessary, leave data alone.
Word of warning though, always make a nandroid backup before installing a new rom, although they're stable they are still called experimental for a reason, and sometimes (not very often) things can still go wrong.
Sent from my HTC Wildfire using xda premium
i wiped both the dalvik and partition cache and installed the #208 nightly build and the latest kernel but then the phone would just restart automatically. do i have to wipe data as well?
Yes do a "Wipe Data / Factory Reset" in Clockworkmod if it is giving you issues. Then try a fresh install and check again for instability.
Note - Performing a Wipe Data / Factory Reset will erase all data (Except SD Card)
well i not sure but i think the problem still occurs.. yes it does. i wiped data, cache and dalvik cache, did a install using cwm and it still reboots WHAT TO DO NOW
showlyshah said:
Lol you may have used beta 4 script, try beta 3, need to use atleast ext3 as your secondary partition. Try it with latest original cwm recovery. 5.xxx to partition. Do a clean install after partition.
And a personal suggestion. S2e app in market is good than dta2sd, though it have not much functions, but what it have, it does its best. I use it.
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
Hey thanks dude .. yup i was using beta 3 last time.. beta 4 was a disaster to CM7.. .. i tried that too ..
but i think my partition was ext2 coz i am using CWM 3 .. will try with CWM 5 .. and sure... S2e too ...
Do you let it boot up before flashing the kernel?
Sent from my HTC Wildfire using xda premium
For i always keep a backup of my contacts in sd. Also apps using titanium backup, i had never used a nandroid backup till now, i alwayz do fresh installs, wiping every thing but not fat32. And always keep things updated.
Sent from my HTC Wildfire using XDA App
ok now i have another problem. my phone will just reboot after hanging when i open system panel task manager. please some one help me
ongtengjun said:
ok now i have another problem. my phone will just reboot after hanging when i open system panel task manager. please some one help me
Click to expand...
Click to collapse
dude is it the same one you had before? thats why we mention to give your current spec. with out it we cant do any thing or we cant help you.
i apologize for my noob question in advance.
i'm new to the whole flashing ROMs/kernels and what not scene. im interested in flashing the newest energy rom and i have seen a lot of people saying that the anthrax kernel is amazing with the energy rom. i know how to flash a ROM, I'm just not sure what to do about the kernel. so i was just wondering if somebody can give me a quick tutorial on how to flash anthrax's kernel with the energy rom.
again, i apologize for my noob question. any help would be much appreciated. thanks
zakphi said:
i apologize for my noob question in advance.
i'm new to the whole flashing ROMs/kernels and what not scene. im interested in flashing the newest energy rom and i have seen a lot of people saying that the anthrax kernel is amazing with the energy rom. i know how to flash a ROM, I'm just not sure what to do about the kernel. so i was just wondering if somebody can give me a quick tutorial on how to flash anthrax's kernel with the energy rom.
again, i apologize for my noob question. any help would be much appreciated. thanks
Click to expand...
Click to collapse
You flash a kernel like a rom.
Wipe, Flash the rom, flash the kernel, reboot.
Should be good after that.
Make sure the kernel is for Sense if you are using sense or AOSP if you are using AOSP.
SetCPU will let you configure the kernel.
thanks for the quick response xnotta. i just want to make sure, i wipe everything, meaning dalvik, cache, and data, right??
On energy wipe ONLY dalvik cache mount data in recovery flash kernel unmount data reboot
Sent from my PC36100 using XDA App
zakphi said:
thanks for the quick response xnotta. i just want to make sure, i wipe everything, meaning dalvik, cache, and data, right??
Click to expand...
Click to collapse
If you are already running the rom(Energy) then you can just wipe Cache and Dalvik then flash the kernel(anthrax).
You only need to wipe everything if you are installing the rom(Energy) fresh.
Sorry for the confusion.
xNotta said:
If you are already running the rom(Energy) then you can just wipe Cache and Dalvik then flash the kernel(anthrax).
You only need to wipe everything if you are installing the rom(Energy) fresh.
Sorry for the confusion.
Click to expand...
Click to collapse
Don't wipe cache
Sent from my PC36100 using XDA App
If you don't do it exactly how I stated your WiFi will break and you'll lose alot of apps ect
Sent from my PC36100 using XDA App
so let me get this straight because i am doing a clean install of the energy rom, i should wipe everything, flash rom, flash kernel, then reboot? i also read something about mounting/unmounting to prevent breaking wifi, do i need to worry about that?
zakphi said:
so let me get this straight because i am doing a clean install of the energy rom, i should wipe everything, flash rom, flash kernel, then reboot? i also read something about mounting/unmounting to prevent breaking wifi, do i need to worry about that?
Click to expand...
Click to collapse
So flash rom wipe dalvik cache mount data flash kernel unmount data reboot
Sent from my PC36100 using XDA App
thanks evo4gnoob
i forgot to mention. i have a gapps zip file. when should i flash that?
zakphi said:
i forgot to mention. i have a gapps zip file. when should i flash that?
Click to expand...
Click to collapse
The rom comes with gapps only aosp roms require flashing gapps
Sent from my PC36100 using XDA App
Im running cm-nightlies 256 coupled with tiamat 3.3.7 no sbc and running the ram script. Not vipermods scripts. Apps keep freezing and forceclosing and some even cause my phone to reboot. Its a completely clean install for the rom. Everything was wiped multiple times. Then had a clean flash with the kernel. Any ideas what might be causing it?
Sent from my PC36100 using xda premium
Alright since you wiped it I would say its because the kernel and scripts. try getting rid of them bro and see if it helps if not flash a different version of cm because the nighties are not always stable
Fix permissions in recovery or ROM Manager.
Sent from the original Swagged Out EVO via Tapatalk 2
Boot to recovery Wipe cache and dalvik 3x each, fix permissions(uid mismatches) under advanced menu, wipe cache and dalvik again, reboot if that doesnt fix it flash the rc of cm7.2 as it's more stable than the nightlys and if u upgrade to 7.2 change your kernel to tiamat 4.1.0 I found it plays better with cm7.2 than 3.3.7 does
Sent from my SPH-D710 using xda premium
Yeah, what they said.
Thanks guys.
Sent from my PC36100 using xda premium
Undo any kernal tweaks from ethier v6 or kak
sent from my EVO EXPRESS 4g
Some of my apps suddenly started to FC. I haven't changed anything, except switch from Franco to Trinity kernel. I'm on CNA 3.6.0.
I know at least about two of my apps that are problematic: iGag and PowerAmp. No matter how many times I reinstall them, they will just FC when I try to open them up. Clearing cache and dalvik-cache doesn't change anything.
Please help.
krneki10 said:
Some of my apps suddenly started to FC. I haven't changed anything, except switch from Franco to Trinity kernel. I'm on CNA 3.6.0.
I know at least about two of my apps that are problematic: iGag and PowerAmp. No matter how many times I reinstall them, they will just FC when I try to open them up. Clearing cache and dalvik-cache doesn't change anything.
Please help.
Click to expand...
Click to collapse
Try factory resetting, if fails then it could be a corruption, unstably or missing code from the new kernel you flashed.
Did the issue occurred when you flashed the kernel?
Sent from my Sony Tablet S using xda premium
I just tried to use Franco again, but no difference.
krneki10 said:
I just tried to use Franco again, but no difference.
Click to expand...
Click to collapse
Factory Reset?
What did you do before the force closes occur?
Sent from my Sony Tablet S using xda premium
krneki10 said:
Some of my apps suddenly started to FC. I haven't changed anything, except switch from Franco to Trinity kernel. I'm on CNA 3.6.0.
I know at least about two of my apps that are problematic: iGag and PowerAmp. No matter how many times I reinstall them, they will just FC when I try to open them up. Clearing cache and dalvik-cache doesn't change anything.
Please help.
Click to expand...
Click to collapse
I would also run a "fix permissions" in recovery. Solved the problem I was having on CNA as well. Wipe your cache, and dalvik, and see if that does it.
Re-flash in this order: cna, gapps, trinity kernel. At next reboot, boot to recovery & fix permissions. It's a ramdisk issue..
Before you wipe everything, try clean Dalvik cache first see if it helps
Sent from my Galaxy Nexus using xda premium
qtwrk said:
Before you wipe everything, try clean Dalvik cache first see if it helps
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
What I suggested above won't wipe anything and will fix it. Cleaning dalvik won't do anything.
Reflashing your ROM will indeed probably fix it.
addisontodd said:
I would also run a "fix permissions" in recovery. Solved the problem I was having on CNA as well. Wipe your cache, and dalvik, and see if that does it.
Click to expand...
Click to collapse
Wow, i can't believe i really forgot about Fix permissions XP
Sent from my Sony Tablet S using xda premium