Related
HOW I CAN UPDATE MY JASJAR FROM JASJAR_WWE_11353_137_10301 TO JASJAR_ITA_11346_126_10301_ship??
COUNTRY ID ERROR
Thanks and excuse my english
Just unpack/extract the JASJAR_ITA_11346_126_10301_ship file into a directory.
donwload the attached file to this same directory
Run it and the Country ID error will come out, run it again right after, and it should work
what you mean with "download the attached file to the same directory"....which file??
Thanks
Carlo Salvatore :x
thanks, but the update is ok without country error, but after the reset the screen is black with word: serial and v1.0
sorry...i found out the file you put for download but if i run the rom twice after have the rom and the file in the same directory i have the same error message....coul you please help me?
Thanks
Carlo Salvatore
carsa read pm
did IT!!!!...thank a lot...
carsa help me in private, please
edoalom hope everithing was fine!
i've the same problem, can you help me, too?
directory?
carsa said:
what you mean with "download the attached file to the same directory"....which file??
Thanks
Carlo Salvatore :x
Click to expand...
Click to collapse
I've got the .exe file and it simply wants to self-install in a directory with my JJ. So, which directory should I try to install this then?
thanks.
edved
Just extract the rom required using winrar or similar (normally done by right clicking on the file and selecting extract)
donwload the file "MaUpgradeUt_noID.exe"
Copy this file into the directory
Run it and the Country ID error will come out, run it again right after, and it should work
Italian to English
I purchased an imate jasjar in Italy last week. The salesperson confirmed that I can change the language from Italian to English. But when I contacted the Imate people they say it is not possible, Can someone guide me?
Thanks Felician
hanhha2000 said:
Just extract the rom required using winrar or similar (normally done by right clicking on the file and selecting extract)
donwload the file "MaUpgradeUt_noID.exe"
Copy this file into the directory
Run it and the Country ID error will come out, run it again right after, and it should work
Click to expand...
Click to collapse
Hi hanhha2000, the required rom that I wanted to flash is with a .exe extension behind, how can we use winrar with this type of file, hope you can enlighten me as I have also ran in Country ID Error problems, thank you.
Will this technique work for my i-mate JAMin? im just afraid to screw up my device completely cos iv heard that that can happen
thanx for your help pls reply asap
I've the same problem. can you help me to solve. tnk
DeVegas said:
Hi hanhha2000, the required rom that I wanted to flash is with a .exe extension behind, how can we use winrar with this type of file, hope you can enlighten me as I have also ran in Country ID Error problems, thank you.
Click to expand...
Click to collapse
Hi,
The way i use is run the update rom and when appear the Country error, open the windows explorer and copy the folder in the temporary folder to a new location, then put the file ...noID.exe in the new folder.
I see many people's whant the stantar Microsoft windows update in cooked rom's.
So i manage to make a cab with all the files,
in my device work's well.
Also with this .reg file you can enable the customer feedback in settings menu.
Just rename the .txt to .reg and run it in your device with your fav registry explorer.
Try it and post your result.
(Sorry to open a new thread but i didn't know where to post it so all user's can find it).
Work's only in wm6
EDIT:
Open the config.zip extract the mxipcold_autoupdate_100.provxml and the Config Loader.exe and the Microsoft_Windows_Update.cab in your storage card.
Run Config Loader.exe and choose the mxipcold_autoupdate_100.provxml the device should ask for restart.
Before do the restart go with file explorer and run the Microsoft_Windows_Update.cab.
After that soft reset.
Click to expand...
Click to collapse
Thank's
Thanks for the file
It's to bad you didn't manage to do the same for audiobooster....
flashmp3 said:
Thanks for the file
It's to bad you didn't manage to do the same for audiobooster....
Click to expand...
Click to collapse
Hello...
I never see the audio booster work's in trinity device...
So i dont know if it is work's at all.
I try some ways but with no sucess...
Maybe someone else can help with audio booster.
Sorry for that.
Thanks for the cab file, BUT does update anything?
Cab file no longer shows for me
Was there, clicked on it and told it's not there.
Scratch that it's back again... Funny 5 mins I guess.
taiseer999 said:
Thanks for the cab file, BUT does update anything?
Click to expand...
Click to collapse
What did you mean ??
Doesn't search for update's???
If not i have another solution...
doesn't work for me!! I receive connection error while I'm connected either through wifi or activesyn
I get the same error message
same error for me
Ok so try the way i did..
Open the config.zip extract the mxipcold_autoupdate_100.provxml and the Config Loader.exe and the Microsoft_Windows_Update.cab in your storage card.
Run Config Loader.exe and choose the mxipcold_autoupdate_100.provxml the device should ask for restart.
Before do the restart go with file explorer and run the Microsoft_Windows_Update.cab.
After that soft reset.
This method i follow and work's.
Thank's
Thanks ausdim, now it works.
alnajmi said:
Thanks ausdim, now it works.
Click to expand...
Click to collapse
Ok that is good news...
So for now we can install the autoupdate or not...
Thank's for trying.....
For AUSDIM
Hello,
I test it and all are OK !!!
You are the best of CAB.
Private69.
@++++
Config Loader gives to me an exception as soon as I load mxipcold_autoupdate_100.provxml.
Exactly UnauthorizedAccessException.
For GDT
Hello,
You must extract File By WinZIP in PPC not Extract On Your computer.
Private69.
@+++
I did so...
for GDT
hello,
Process :
First Copy The file config.zip on you SD Card.
Search Winzip on your PPC and Open Config.zip with it.
And extract this 3 files : mxipcold_autoupdate_100.provxml
Config Loader.exe
Microsoft_Windows_Update.cab
On your SD card.
After
Run Config Loader.exe and choose the mxipcold_autoupdate_100.provxml the device should ask for restart.
Before do the restart go with file explorer and run the Microsoft_Windows_Update.cab.
After that soft reset.
And All OK !!!
Private69.
@+++
private69 said:
hello,
Process :
etc... etc...
Private69.
@+++
Click to expand...
Click to collapse
It was exactly what I did. The only difference is that I've previously installed WindowsUpdate.CAB (before ausdim posts the fix) and I can't uninstall it...
I've tried to unzip files on PC and then put them in sd via ActiveSync and to unzip files directly form the sd card via ppc unzip. I get no changes.
To GDT
Uninstalling doesn't work from the first time, try once more and it should work.
I get error message with config loader
I just updated my Tmobile dash to the RUU_Excalibur_HTC_WWE_Brightpoint_US_1.33.422.1_4.1.13.51_03.07.90_Ship ROM and now the voice commands seems to have disapeared.
In the old TMOBILE phone, I was able to see the app and also click on my headset to activate. Now that setting seems to have disappeared and I get the message "no voice tag setup" (or something like that).
Can anyone help me get this working again? It was a great feature which allowed me to call on the fly using only my headset while leaving my phone in my bag.
Forgive me if I am posting anything in the wrong place or re-posting. I am a newbie to this and forum.
Thanks
YOOJ
yoojie said:
I just updated my Tmobile dash to the RUU_Excalibur_HTC_WWE_Brightpoint_US_1.33.422.1_4.1.13.51_03.07.90_Ship ROM and now the voice commands seems to have disapeared.
In the old TMOBILE phone, I was able to see the app and also click on my headset to activate. Now that setting seems to have disappeared and I get the message "no voice tag setup" (or something like that).
Can anyone help me get this working again? It was a great feature which allowed me to call on the fly using only my headset while leaving my phone in my bag.
Forgive me if I am posting anything in the wrong place or re-posting. I am a newbie to this and forum.
Thanks
YOOJ
Click to expand...
Click to collapse
There is no Voice Command in this ROM.
Check out my post here to get it working:
http://forum.xda-developers.com/showpost.php?p=1834188&postcount=154
Voice Command On The New HTC WM6 ROM
boggsie said:
There is no Voice Command in this ROM.
Check out my post here to get it working:
http://forum.xda-developers.com/showpost.php?p=1834188&postcount=154
Click to expand...
Click to collapse
When you install the voice command app to the new wm6 HTC ROM, the way its described in this link, it works like a charm, the same way it does on the T-Mobile wm6 ROM. Just follow the instructions to a "T"....................!
THANKS!!! Worked perfectly..
FYI - you have to remove the shortcut from start folder otherwise you will get an error when trying to copy files into the prog folder.
Then paste the shortcut back in.
yoojie said:
THANKS!!! Worked perfectly..
FYI - you have to remove the shortcut from start folder otherwise you will get an error when trying to copy files into the prog folder.
Then paste the shortcut back in.
Click to expand...
Click to collapse
Yes, that is essentially step 2 in the instructions:
remove the lnk from the Voice Command item in the startup folder
what is described is changing the extension of the shortcut by removing lnk
Technology said:
When you install the voice command app to the new wm6 HTC ROM, the way its described in this link, it works like a charm, the same way it does on the T-Mobile wm6 ROM. Just follow the instructions to a "T"....................!
Click to expand...
Click to collapse
" T "
nice ...
something wrong with the second file because i can't extract it.
when i try to , it only extra the direc. file.
drunkenmastera said:
something wrong with the second file because i can't extract it.
when i try to , it only extra the direc. file.
Click to expand...
Click to collapse
dunno what might have happened
I just this very minute downloaded it as a test and it extracted fine for me
maybe try again?
boggsie said:
dunno what might have happened
I just this very minute downloaded it as a test and it extracted fine for me
maybe try again?
Click to expand...
Click to collapse
yea its weird.........
i restart computer and everything. still can't get the files in there.....
any way u can make me a new rar.......
I can't extract either, I'm using Universal Extractor. Whenever I extract, all I get is a readme type file.
I extracted the folder from the second link. When I opened that folder, there is another folder called Voice Command DASH. I opened that folder, and then copied all 34 files to the \Program Files\Voice Command folder. When i try to copy the files from the second link to the program files\Voice Command folder, I get the following message:
cannot copy enu_g2p: There has been a sharing violation. The source or destination file may be in use.
Any ideas?
galatians51 said:
I can't extract either, I'm using Universal Extractor. Whenever I extract, all I get is a readme type file.
Click to expand...
Click to collapse
the second file.
i had to open it in winrar and repair and remake it.
and then it would extract again.
hollywoodstylin said:
I extracted the folder from the second link. When I opened that folder, there is another folder called Voice Command DASH. I opened that folder, and then copied all 34 files to the \Program Files\Voice Command folder. When i try to copy the files from the second link to the program files\Voice Command folder, I get the following message:
cannot copy enu_g2p: There has been a sharing violation. The source or destination file may be in use.
Any ideas?
Click to expand...
Click to collapse
Funny thing is that in the \Windows\Startup folder, I don't see the .lnk. I have unchecked the box to hide extensions for known file type. Also, I just try and copy the shortcut from the Startup folder to my computer desktop and then soft-reset the phone. Everytime I soft reset the phone, it still places the shortcut in the \Windows\Startup folder.
I finally got it to work!!!
Instead of renaming the shortcut from the \Windows\Startup, I went and just copied it to desktop. However, after a few times, I followed the instructions and instead of renaming the shortcut again and adding .lnk to the end, I just dragged and dropped from my desktop to the \Windows\Startup folder.
drunkenmastera said:
the second file.
i had to open it in winrar and repair and remake it.
and then it would extract again.
Click to expand...
Click to collapse
This worked great, thank you!
It is so nice now having voice command again... I bought an adaptor and am using my Dash in the car for music- really awesome to play music using your voice!
boggsie said:
Yes, that is essentially step 2 in the instructions:
remove the lnk from the Voice Command item in the startup folder
what is described is changing the extension of the shortcut by removing lnk
Click to expand...
Click to collapse
I accidentally deleted the Voice Command lnk file. Can someone send me a copy? Or how can I recreate one? THANKS!
Hello!
I want to make custom ROM for Desire 300 and right now I have I think it's original ROM. (I downloaded it from Google Drive).
Now when I enter that ROM I can see this: http://prntscr.com/6swvgq
Now I want to edit system file, but when I try this pops up: http://prntscr.com/6swwiz
How to enter system file ?
You are opening it with DAEMON Tools. One question. Why you need to open system file? Well, you can extract it, and view what's inside
DroidTwe4kz said:
You are opening it with DAEMON Tools. One question. Why you need to open system file? Well, you can extract it, and view what's inside
Click to expand...
Click to collapse
When I open it with Windows default program (Windows Explorer) this pops up: http://prntscr.com/6sxqzr
I need to open it to modify system apks, build.prop (or something like that).
jukson said:
When I open it with Windows default program (Windows Explorer) this pops up: http://prntscr.com/6sxqzr
I need to open it to modify system apks, build.prop (or something like that).
Click to expand...
Click to collapse
Use Google search about mounting, extracting .img files.
jukson said:
Hello!
I want to make custom ROM for Desire 300 and right now I have I think it's original ROM. (I downloaded it from Google Drive).
Now when I enter that ROM I can see this: http://prntscr.com/6swvgq
Now I want to edit system file, but when I try this pops up: http://prntscr.com/6swwiz
How to enter system file ?
Click to expand...
Click to collapse
Here is how to extract it http://forum.xda-developers.com/showthread.php?t=2294909
PS:Would You give me link for that original rom, please? I'm looking for one from months.
Hi!
Help me...
How do I set it to apk file when you run the installer package you get started? If I send a file via Bluetooth, you can not install because it does not appear as an option in the installer package. Lots of options are displayed, but the installation does not.
How could this be adjusted?
Anyone else has experienced this problem?
I have 1+3 Oxygen 3.1.3.
The same bug is present in my OP 2 device also has the Android 6.0.1.
Use a file manager, go to your Bluetooth folder and in that folder should be the apk file you want to install. Then install it, worked for me
Yes, I know how it works. But if a file is transmitted via Bluetooth to the phone, the guest file is displayed, opened for offering it. And there is no installation options than with the older (Lollipop)!