Develop Bugs

JasJar Italian

Hi,
I made the mistake to buy JasJar in Italian and now I'm late for all upgrades. There's the possibility to change language into English?
Thanks
Stefano

sure ... try the new qtek 9000 rom

I've tried
Hi, I've tried with WWE Rom but installing I get an error due the different language.
Thanks for help me.

By the way....
.... I've not qtek but Imate JASJAR.
Thanks

here you have a step by step
http://forum.xda-developers.com/viewtopic.php?t=29354&highlight=

I'm unable
Hi I've done:
1. get the JASJAR_WWE_11353_137_10301
1a. get the exe from the zip file - if needed
1b. unzip the exe file to a directory
1c. place the enclosed file MaUpgradeUt_noID in the directory
1d. run the upgrade
At this time I recieve a message that says me:
ERROR 120: CONTRY ID ERROR
The ROM inage that you're trying to use is not designed to work on your device. Please check the vender Web site and download the correct ROM update.
What I can do?
Thanks

run again the
MaUpgradeUt_noID for the upgrade

I'm sorry to disturb you but I?m not able. I've tried to run MaUpgradeUt_noID but appear a message saying me that is not possible run the selected application as RUU.dll was not found.
I've copied MaUpgradeUt_noID in the same directory of the ROM file. Is that right??
Thanks and sorry.

May be the problem is:
1b. unzip the exe file to a directory
Is posible to unzip to a directory? I run the .exe file and I see that file decompress but I don't know where.
The problem is that I put MaUpgradeUt_noID in the .exe directory and due to that I have error message.
is there a program that unzip an exe file?
Thanks

Download winrar. Right click on the file and select "extract to...."
Can you please backup the content of the "windows" directory before upgrading? It should contain all the certified .mui files for the italian localization already signed and ready to work in the wm5 jasjar environment. Then put a zip file in the upload area of this forum. I would like to experiment a little bit with the italian localization.... 8)

I just performed the upgrade without any glitch.
Now I have the last english.ROM
Now the only problem is that special symbols on the keyboard are wrong.
I'm sure there is a registry hack that switches the keyboard back to my italian keyboard (I have an italian JasJar).
Do you know what key should I change and what value should I put there?
Thanks a lot,
Francesco

Was not possible to copy
Dear Topogigi,
Thanks for the suggestion about winrar. Now is OK.
I was not able to copy the windows directory as I get some error copying. Sorry.
Ciao

DONE!!!
Dear all, I got it!!! THANKS FOR YOUR HELP.
Now I've a small problem: Keyboard. Italian KB has differente layout than WWE. There's way to solve this problem? For example, @ is FN+Q and in WWE is FN+2...
Thanks for all!!

Windows update cab....

I see many people's whant the stantar Microsoft windows update in cooked rom's.
So i manage to make a cab with all the files,
in my device work's well.
Also with this .reg file you can enable the customer feedback in settings menu.
Just rename the .txt to .reg and run it in your device with your fav registry explorer.
Try it and post your result.
(Sorry to open a new thread but i didn't know where to post it so all user's can find it).
Work's only in wm6
EDIT:
Open the config.zip extract the mxipcold_autoupdate_100.provxml and the Config Loader.exe and the Microsoft_Windows_Update.cab in your storage card.
Run Config Loader.exe and choose the mxipcold_autoupdate_100.provxml the device should ask for restart.
Before do the restart go with file explorer and run the Microsoft_Windows_Update.cab.
After that soft reset.
Click to expand...
Click to collapse
Thank's

Thanks for the file
It's to bad you didn't manage to do the same for audiobooster....

flashmp3 said:
Thanks for the file
It's to bad you didn't manage to do the same for audiobooster....
Click to expand...
Click to collapse
Hello...
I never see the audio booster work's in trinity device...
So i dont know if it is work's at all.
I try some ways but with no sucess...
Maybe someone else can help with audio booster.
Sorry for that.

Thanks for the cab file, BUT does update anything?

Cab file no longer shows for me
Was there, clicked on it and told it's not there.
Scratch that it's back again... Funny 5 mins I guess.

taiseer999 said:
Thanks for the cab file, BUT does update anything?
Click to expand...
Click to collapse
What did you mean ??
Doesn't search for update's???
If not i have another solution...

doesn't work for me!! I receive connection error while I'm connected either through wifi or activesyn

I get the same error message

same error for me

Ok so try the way i did..
Open the config.zip extract the mxipcold_autoupdate_100.provxml and the Config Loader.exe and the Microsoft_Windows_Update.cab in your storage card.
Run Config Loader.exe and choose the mxipcold_autoupdate_100.provxml the device should ask for restart.
Before do the restart go with file explorer and run the Microsoft_Windows_Update.cab.
After that soft reset.
This method i follow and work's.
Thank's

Thanks ausdim, now it works.

alnajmi said:
Thanks ausdim, now it works.
Click to expand...
Click to collapse
Ok that is good news...
So for now we can install the autoupdate or not...
Thank's for trying.....

For AUSDIM
Hello,
I test it and all are OK !!!
You are the best of CAB.
Private69.
@++++

Config Loader gives to me an exception as soon as I load mxipcold_autoupdate_100.provxml.
Exactly UnauthorizedAccessException.

For GDT
Hello,
You must extract File By WinZIP in PPC not Extract On Your computer.
Private69.
@+++

I did so...

for GDT
hello,
Process :
First Copy The file config.zip on you SD Card.
Search Winzip on your PPC and Open Config.zip with it.
And extract this 3 files : mxipcold_autoupdate_100.provxml
Config Loader.exe
Microsoft_Windows_Update.cab
On your SD card.
After
Run Config Loader.exe and choose the mxipcold_autoupdate_100.provxml the device should ask for restart.
Before do the restart go with file explorer and run the Microsoft_Windows_Update.cab.
After that soft reset.
And All OK !!!
Private69.
@+++

private69 said:
hello,
Process :
etc... etc...
Private69.
@+++
Click to expand...
Click to collapse
It was exactly what I did. The only difference is that I've previously installed WindowsUpdate.CAB (before ausdim posts the fix) and I can't uninstall it...
I've tried to unzip files on PC and then put them in sd via ActiveSync and to unzip files directly form the sd card via ppc unzip. I get no changes.

To GDT
Uninstalling doesn't work from the first time, try once more and it should work.

I get error message with config loader

who knows exactly runs "P535 RomTool"?

How it works exactly?
if upgrade WM6 Asus P535 wrong (cheksum error, update fail), we need one nb0 file for repair
we make nb0 file with this program (P535RomTool) and the file incluided in the upgrade (AsusP535.cap)
The command is C:/P535RomTool -d6 AsusP535.cap
and both files (the program P535RomTool, and the file, AsusP535.cap)is in C:
but answer is: can not open file destination
what´s wrong?
Thanks
Aure

Auredelrio said:
How it works exactly?
if upgrade WM6 Asus P535 wrong (cheksum error, update fail), we need one nb0 file for repair
we make nb0 file with this program (P535RomTool) and the file incluided in the upgrade (AsusP535.cap)
The command is C:/P535RomTool -d6 AsusP535.cap
and both files (the program P535RomTool, and the file, AsusP535.cap)is in C:
but answer is: can not open file destination
what´s wrong?
Thanks
Aure
Click to expand...
Click to collapse
is it for change rom???
i need to change from spanish to italian....
can u help me?
thanks

...and I need to change it from French to Spanish. The Spanish update provided by Asus doesnt work "in the device's version"

I can not turn device off - need poweroffwarning.exe

hallo,
I can not turn off my HTC3300 .
It only moves to standby mode.
Can someone give me the file poweroffwarning.exe.
I dont know what version informations to provide... WM6.5.3. What else is needed to get the right exe from you.
please help

cska133 said:
hallo,
I can not turn off my HTC3300 .
It only moves to standby mode.
Can someone give me the file poweroffwarning.exe.
I dont know what version informations to provide... WM6.5.3. What else is needed to get the right exe from you.
please help
Click to expand...
Click to collapse
you can download power off warning from here

hi,
thanks.
Are this to files install setups or just the single exe files?
I was thinking of replacing the existing exe file of poweroffwaring.exe. If these are setups, lease could you send me the single exe file
thanks

cska133 said:
hi,
thanks.
Are this to files install setups or just the single exe files?
I was thinking of replacing the existing exe file of poweroffwaring.exe. If these are setups, lease could you send me the single exe file
thanks
Click to expand...
Click to collapse
it's not the setup file ! you just need to extract and copying them to your device

thnaks.
the first file (not the PoweroffXP)... I can not execute it, no action, and the file icon is as of unrecognized file.
Could you check it.

there is a single .exe called "myshutdown.exe"
you can get the version where it wont ask you to comfirm a power off and it just shuts down
Rn

where from to take this version? where is this .exe?

here dude
this version will shutdown the device instantly on click, eg no UI to say yes, no or cancel etc
Rn

Nubian Emergency Tool 1.1.4 Works with 17 series models

This is the link to download from You will need to translate the website:
I tried to upload the file but the website keeps timing out.
http://bbs.nubia.cn/forum.php?mod=viewthread&tid=1118215&highlight=努比亚急救工具

Can't access to the link, needs an account. Link broken on pan.baidu

ı dıd downloand but wıth vpn :=)

pls upload tool . i cant download from paindu

after 1 day, i unbrick succeessfuly z17 mini. Now i am happy to see it alive .

Here is a link for people who can't access baidu: https://ufile.io/4dyko
This link expires in 4 weeks (Free account sorry)

@EmreGze Thanks, Download in progress

Ursus91 said:
@EmreGze Thanks, Download in progress
Click to expand...
Click to collapse
No problem hope it works out well for you. I had trouble understanding the software but I managed to unbrick my phone with it.

I've a look to the zip file...
The exe file looks "bizarre"
┼¼▒╚ÐÃ╝▒¥╚╣ñ¥▀V1.1.4.exe
The MD5 file is corrupt : "erreur d'entête" in French
I think it is because of the file name. I'll test unzip under linux

Ursus91 said:
I've a look to the zip file...
The exe file looks "bizarre"
┼¼▒╚ÐÃ╝▒¥╚╣ñ¥▀V1.1.4.exe
The MD5 file is corrupt : "erreur d'entête" in French
I think it is because of the file name. I'll test unzip under linux
Click to expand...
Click to collapse
Yes mines like that too for me the program name is:Ŭ±ÈÑǼ±¾È¹¤¾ß. Haha.
I literally had to guess what I had to do to get it working the pictures helped a little.

I change the name using Linux Mint.
I'll upload the file in a few days.
I'll have a look the the text files (resources) in order to give some explanations if I can do it.

Ursus91 said:
I change the name using Linux Mint.
I'll upload the file in a few days.
I'll have a look the the text files (resources) in order to give some explanations if I can do it.
Click to expand...
Click to collapse
There's no need to rename the files/folders using linux. Opening the .zip file in explorer (win10) is enough to uncompress it, then tou can rename files/folders as you like.
The software installs and run just fine. Nubia Z17 is supported up to rel. 3.08 (so it seems exploring the "Recovery" folder under C:\Program Files (x86)\nubia\BackupRecoveryTool.
All the recovery files are in .7z format and password encrypted (don't know at the moment if the password is embedded into the recovery tool main program.

Don't have W10
<HS>
I've some problems too to unlock the boot loader.
After unlock it once and flash TWRP, all other attempts are KO (can't flash with adb).
I wanted to flash the "standard recovery" to install the OTA update (modded 3.08) and reflash after TWRP.
I'll test it later
</HS>

File looks to be corrupt
EmreGze said:
Here is a link for people who can't access baidu: https://ufile.io/4dyko
This link expires in 4 weeks (Free account sorry)
Click to expand...
Click to collapse
Downloaded several times but it looks corrupt.
7-zip can not open it.
Windows explorer extracted it but while running, it says can not find path.

i have the nubia z17 brick. the emrgency tool show me
2018-01-27 17:13:53.320 0001 2 __msg::MSG_ERROR
2018-01-27 17:13:53.336 0000 5 Initialize firehose download service failed
please help

hello guys can any1 tell me whats first one and third one says ? mıddle one is recovery tht ı understand.

Any software for Z5s series?

btruong said:
after 1 day, i unbrick succeessfuly z17 mini. Now i am happy to see it alive .
Click to expand...
Click to collapse
can you guide me how to solve ?
mine is stuck in boot logo

EmreGze said:
Here is a link for people who can't access baidu:
This link expires in 4 weeks (Free account sorry)
Click to expand...
Click to collapse
Hello, good morning, I could not download for Baidu or the link that you put because it is unavailable. You could send me the file or the link again. Thank you.

I upload for you
Nubia emergency Tool V1.1.4: https://www.up-4ever.com/io2mab10hl1v