I see many people's whant the stantar Microsoft windows update in cooked rom's.
So i manage to make a cab with all the files,
in my device work's well.
Also with this .reg file you can enable the customer feedback in settings menu.
Just rename the .txt to .reg and run it in your device with your fav registry explorer.
Try it and post your result.
(Sorry to open a new thread but i didn't know where to post it so all user's can find it).
Work's only in wm6
EDIT:
Open the config.zip extract the mxipcold_autoupdate_100.provxml and the Config Loader.exe and the Microsoft_Windows_Update.cab in your storage card.
Run Config Loader.exe and choose the mxipcold_autoupdate_100.provxml the device should ask for restart.
Before do the restart go with file explorer and run the Microsoft_Windows_Update.cab.
After that soft reset.
Click to expand...
Click to collapse
Thank's
Thanks for the file
It's to bad you didn't manage to do the same for audiobooster....
flashmp3 said:
Thanks for the file
It's to bad you didn't manage to do the same for audiobooster....
Click to expand...
Click to collapse
Hello...
I never see the audio booster work's in trinity device...
So i dont know if it is work's at all.
I try some ways but with no sucess...
Maybe someone else can help with audio booster.
Sorry for that.
Thanks for the cab file, BUT does update anything?
Cab file no longer shows for me
Was there, clicked on it and told it's not there.
Scratch that it's back again... Funny 5 mins I guess.
taiseer999 said:
Thanks for the cab file, BUT does update anything?
Click to expand...
Click to collapse
What did you mean ??
Doesn't search for update's???
If not i have another solution...
doesn't work for me!! I receive connection error while I'm connected either through wifi or activesyn
I get the same error message
same error for me
Ok so try the way i did..
Open the config.zip extract the mxipcold_autoupdate_100.provxml and the Config Loader.exe and the Microsoft_Windows_Update.cab in your storage card.
Run Config Loader.exe and choose the mxipcold_autoupdate_100.provxml the device should ask for restart.
Before do the restart go with file explorer and run the Microsoft_Windows_Update.cab.
After that soft reset.
This method i follow and work's.
Thank's
Thanks ausdim, now it works.
alnajmi said:
Thanks ausdim, now it works.
Click to expand...
Click to collapse
Ok that is good news...
So for now we can install the autoupdate or not...
Thank's for trying.....
For AUSDIM
Hello,
I test it and all are OK !!!
You are the best of CAB.
Private69.
@++++
Config Loader gives to me an exception as soon as I load mxipcold_autoupdate_100.provxml.
Exactly UnauthorizedAccessException.
For GDT
Hello,
You must extract File By WinZIP in PPC not Extract On Your computer.
Private69.
@+++
I did so...
for GDT
hello,
Process :
First Copy The file config.zip on you SD Card.
Search Winzip on your PPC and Open Config.zip with it.
And extract this 3 files : mxipcold_autoupdate_100.provxml
Config Loader.exe
Microsoft_Windows_Update.cab
On your SD card.
After
Run Config Loader.exe and choose the mxipcold_autoupdate_100.provxml the device should ask for restart.
Before do the restart go with file explorer and run the Microsoft_Windows_Update.cab.
After that soft reset.
And All OK !!!
Private69.
@+++
private69 said:
hello,
Process :
etc... etc...
Private69.
@+++
Click to expand...
Click to collapse
It was exactly what I did. The only difference is that I've previously installed WindowsUpdate.CAB (before ausdim posts the fix) and I can't uninstall it...
I've tried to unzip files on PC and then put them in sd via ActiveSync and to unzip files directly form the sd card via ppc unzip. I get no changes.
To GDT
Uninstalling doesn't work from the first time, try once more and it should work.
I get error message with config loader
Related
I have made s script which installs all files in my Install-Directory of my SD-Card. The script is based on nscriptm and invoked automatically after HardReset.
It installs silently all CAB-Files, Reg-Settings in REG-Files, a TSK-File.
It copys all wanted files automatically from the SD-Card to the PocketPC (e.g. for the Windows-Folder, etc).
It deletes wanted files from the Pocketpc.
It copies Shortcuts.
So a complete new Install lasts only a few minutes. Great for testing.
Now I am searching an unzip/unrar/uncompress/... - Tool which can be invoked from the command-line with additional parameters to uncompress all Install-Files on the SD-Card.
Anyone knows ?
Sounds like an excellent idea. Can you share your script? Sorry I do not know of a zip utility. All installs on cab files are already compressed though.
Doed Pocket WinRar will do the job?
I also would love to try it...
Very good idea
This sounds like a great idea.
No, Winrar is only with GUI. No Commandline. Have searched for days.
CAB-Files are not Compressed I think. Only the EXE-Files containig the CAB-Files for Install on PC are compressed.
Please HELP !
I have made an extended ROM which runs my script now automatically.
If you want it send me PM.
I have also been searching the net for a compresion tool that runs from the command line, but with no luck.
I have made an extended ROM which runs my script now automatically.
If you want it send me PM.
Click to expand...
Click to collapse
axbl,
would love a copy of your script. For everyone's benefit, can you attach it to this thread?
thanks in advance.
axbl said:
No, Winrar is only with GUI. No Commandline. Have searched for days.
CAB-Files are not Compressed I think. Only the EXE-Files containig the CAB-Files for Install on PC are compressed.
Please HELP !
I have made an extended ROM which runs my script now automatically.
If you want it send me PM.
Click to expand...
Click to collapse
Hi axbl, would be happy to test your script, email is [email protected]
Hi axbl,
Could you please also post me a copy of your ROM / Script ?
Many Thanks,
Justin
[email protected]
Has anyone heard from axbl? While waiting in vain, I decided to give this a shot and see how far I go along scripting my installs. I find the nscriptm tool to be very capable but still I am stuck in a few areas which axbl seems to have excelled based on the initial post.
How can one trigger a cab file install and make it a silent install? I am using the Shellwait("") command to trigger the cab file installs one after the other but those that require input are causing an issue.
Next I have tried automating the response to those user input prompts (i.e YES / NO etc) but I am having trouble catching the window handle of the prompts and then using the Sendkey command.
Thanks in advance for all the help. Regards
I use the software call Autoconfig.exe which is included in O2 Asia ROM.
The Autoconfig.exe will read Autoconfig.txt file and execute according to the command line in the file.
The command line is exactly the same as Config.txt
[.......] <---- Section to be selected
CPY1: <---- copy from
CPY2: <---- copy to
EXEC: <---- Execute Program
CAB: <---- Install .cab file
RST: Reset <---- Soft Reset
I can do what I need about 80%. I say 80% is because after this process ended. I still need to put in name/pasword to all of those s/w or else it will still be trial version.
no more?
so any update in this topic??
....pls
little_frog said:
I use the software call Autoconfig.exe which is included in O2 Asia ROM.
The Autoconfig.exe will read Autoconfig.txt file and execute according to the command line in the file.
The command line is exactly the same as Config.txt
[.......] <---- Section to be selected
CPY1: <---- copy from
CPY2: <---- copy to
EXEC: <---- Execute Program
CAB: <---- Install .cab file
RST: Reset <---- Soft Reset
I can do what I need about 80%. I say 80% is because after this process ended. I still need to put in name/pasword to all of those s/w or else it will still be trial version.
Click to expand...
Click to collapse
hi, if you create an xml file or a cab (need winCE cab manager) you can add all the registry details you need to register your program...but you have to search your registry to find those details.
Yes, I can do it while ago.
The post I did was a year ago. At that time, I didn't know how to do it.
Thanks anyway.
axbl said:
I have made s script which installs all files in my Install-Directory of my SD-Card. The script is based on nscriptm and invoked automatically after HardReset.
It installs silently all CAB-Files, Reg-Settings in REG-Files, a TSK-File.
It copys all wanted files automatically from the SD-Card to the PocketPC (e.g. for the Windows-Folder, etc).
It deletes wanted files from the Pocketpc.
It copies Shortcuts.
So a complete new Install lasts only a few minutes. Great for testing.
Now I am searching an unzip/unrar/uncompress/... - Tool which can be invoked from the command-line with additional parameters to uncompress all Install-Files on the SD-Card.
Anyone knows ?
Click to expand...
Click to collapse
Pls can u share the script with us it would be a great help for all of us.
thx in advance
jeet
You don't have to ask that guy. He'd never come back.
It's not that difficult to do. You need to know how to build CAB file by using WinCE CAB Manager. Then, put those REG, TSK, EXE, File, etc. into your built CAB file. By using (Autorun and Config.txt) or (Autoconfig.exe and Autoconfig.txt) or (Autorun and ExtROM via \2577 folder), You can install any CAB files into the system after Hard Reset.
ok
could you pls post the files to do it?
(Autorun and Config.txt) or (Autoconfig.exe and Autoconfig.txt)
if possible?
HOW I CAN UPDATE MY JASJAR FROM JASJAR_WWE_11353_137_10301 TO JASJAR_ITA_11346_126_10301_ship??
COUNTRY ID ERROR
Thanks and excuse my english
Just unpack/extract the JASJAR_ITA_11346_126_10301_ship file into a directory.
donwload the attached file to this same directory
Run it and the Country ID error will come out, run it again right after, and it should work
what you mean with "download the attached file to the same directory"....which file??
Thanks
Carlo Salvatore :x
thanks, but the update is ok without country error, but after the reset the screen is black with word: serial and v1.0
sorry...i found out the file you put for download but if i run the rom twice after have the rom and the file in the same directory i have the same error message....coul you please help me?
Thanks
Carlo Salvatore
carsa read pm
did IT!!!!...thank a lot...
carsa help me in private, please
edoalom hope everithing was fine!
i've the same problem, can you help me, too?
directory?
carsa said:
what you mean with "download the attached file to the same directory"....which file??
Thanks
Carlo Salvatore :x
Click to expand...
Click to collapse
I've got the .exe file and it simply wants to self-install in a directory with my JJ. So, which directory should I try to install this then?
thanks.
edved
Just extract the rom required using winrar or similar (normally done by right clicking on the file and selecting extract)
donwload the file "MaUpgradeUt_noID.exe"
Copy this file into the directory
Run it and the Country ID error will come out, run it again right after, and it should work
Italian to English
I purchased an imate jasjar in Italy last week. The salesperson confirmed that I can change the language from Italian to English. But when I contacted the Imate people they say it is not possible, Can someone guide me?
Thanks Felician
hanhha2000 said:
Just extract the rom required using winrar or similar (normally done by right clicking on the file and selecting extract)
donwload the file "MaUpgradeUt_noID.exe"
Copy this file into the directory
Run it and the Country ID error will come out, run it again right after, and it should work
Click to expand...
Click to collapse
Hi hanhha2000, the required rom that I wanted to flash is with a .exe extension behind, how can we use winrar with this type of file, hope you can enlighten me as I have also ran in Country ID Error problems, thank you.
Will this technique work for my i-mate JAMin? im just afraid to screw up my device completely cos iv heard that that can happen
thanx for your help pls reply asap
I've the same problem. can you help me to solve. tnk
DeVegas said:
Hi hanhha2000, the required rom that I wanted to flash is with a .exe extension behind, how can we use winrar with this type of file, hope you can enlighten me as I have also ran in Country ID Error problems, thank you.
Click to expand...
Click to collapse
Hi,
The way i use is run the update rom and when appear the Country error, open the windows explorer and copy the folder in the temporary folder to a new location, then put the file ...noID.exe in the new folder.
i have a unlocked xda cosmo . when i flash the tmobile wm6 beta , the programm says that the model id is invaliad. i've tried first flashing the tmobile wm5 and than the wm6 , but it doesn't work. does anyone have any ideas?? thanks a lot!
WM6
Hello,
do you have a download link for WM6 ?
Thanks, Newchurch
Newchurch said:
Hello,
do you have a download link for WM6 ?
Thanks, Newchurch
Click to expand...
Click to collapse
take a look at here
http://forum.xda-developers.com/showthread.php?p=1151069#post1151069
james_xl said:
i have a unlocked xda cosmo . when i flash the tmobile wm6 beta , the programm says that the model id is invaliad. i've tried first flashing the tmobile wm5 and than the wm6 , but it doesn't work. does anyone have any ideas?? thanks a lot!
Click to expand...
Click to collapse
Had the same problem with the Cosmo, look here: http://forum.xda-developers.com/showpost.php?p=1151863&postcount=85
Xunil2006 said:
Had the same problem with the Cosmo, look here: http://forum.xda-developers.com/showpost.php?p=1151863&postcount=85
Click to expand...
Click to collapse
yeah!i have emailed imeicheck and they rplied me in 5 minutes!i have successfully flashed my cosmo!!
this is the way to flash it!
Tools you need:
===============
- HexWorkshop from http://www.bpsoft.com/downloads/-
the ROM of your choice
- Winzip or Winrar
- a valid UNL file for YOUR phone
Preparation:
============
a) install HexWorkshop and Winzip or Winrar on your pc
b) in explorer on pc, RIGHT click on the ROM of your choice and use: "Extract files to folder ..." from conext menu Now it will unpack all the files
c) in the new folder you will have ONE file like "HRUU_signed.NBH" (*.NBH) RIGHT click on the .NBH file and use: "Hex Edit with Hex Workshop" from context menu
d) You'll see on the 5th row EXCA20000 ==> !!! make it EXCA***** (5 stars) and save the file
e) Now RIGHT click on ROMUpdateUtility.exe and use: "Hex Edit with Hex Workshop" from conext menu
Search for word "BsaD5SeoA" (without quotes, case sensitive)
You'll find it around address 0x3FC6C ==> !!! replace "BsaD5SeoA" with "IMEICHECK" (without quotes) and save the file
ROM-Update:
===========
1) take SIM card and SD card OUT of the phone
2) Connect the phone running windows ce to the pc (normal way).
3) Completely Unlock your phone using our unlocker <== REALLY IMPORTANT
4) After phone is unlocked run unlocker (again) BUT when the unlocker ask for UNL file, remove the USB cable from the phone THEN press "Cancel" on the unlocker select file window (unlocker will close on PC). NOTE: The screen on the device will not show something usefull when in this mode. Most probably it is complete WHITE. !!THIS IS NORMAL!! Don't touch phone, let it like it is!
5) After you closed the unlocker, attach usb cable again (phone has still white screen) 6) start (the modified) ROMUpdateUtility.exe
7) when update finished and device started you will get a message: "Data Crashed, contact service provider" (!NO PANIC!) ==> Simply fix this problem by running the unlocker again and this time select the key file normal way (full unlock process again). In case you have problems please indicate the step letter/number which is not clear/not working for you. If you REALLY do it STEP by STEP exact like described you will have no problem.
a thousand thanks to IMEI-CHECK~!!
James_xl: Could you please be so kind to share your edited files?
BrumBrum74 said:
James_xl: Could you please be so kind to share your edited files?
Click to expand...
Click to collapse
http://rapidshare.com/files/18907094/ROMUpdateUtility.exe
http://rapidshare.com/files/18907427/RUU_signed.nbh
just unzip the rom you downloaded and replace these two files
It says update utility is too old now.
I read the instructions again and now it worked.
Thanks for the help.
OMFG it worked on my S620! Thanks IMEICHECK!
Nice interface, and you can sync files now!
i tried this several times with no luck. i downloaded the two files and when i tried to run the romupdater prog nothing happens. the program will not start no matter how many times i try. any suggestions?
i think i got it to work now. i had downloaded the two files but had not copied them into the folder that had the extracted rom in it. i was getting stuck at the point where you pull cable out instead of selecting the unlock file. once i had already copied the files over i started all over again and when i got to the step where you disconnect and run the new romupgrade.exe i opened the file where the rom was and clicked the upgrade.exe file and the rest went very smooth and quick.
thanks to everyone that helped out!
but the beta rom is indeed unstable. i hope the final version will soon out!!
james_xl: what problems do you have with the rom?
"4) After phone is unlocked run unlocker (again) BUT when the unlocker ask for UNL file, remove the USB cable from the phone THEN press "Cancel" on the unlocker select file window (unlocker will close on PC). NOTE: The screen on the device will not show something usefull when in this mode. Most probably it is complete WHITE. !!THIS IS NORMAL!! Don't touch phone, let it like it is!"
I've been looking, but where is the unlocker program?
Hello,
you'll get the unlocker program with your imei-unlock-file from imei-check.co.uk.
Newchurch
Hi,
I have searched and searched for the answer to this but can someone please help.
have downloaded some add on's, the dir includes the _setup.xml file which i believe i have to change to a cab file using makecab.exe, i have done this and copied the cab and all the other files on to the device and tried to run the cab but always get, their has been an error, the cab can not be installed. Tried it with several programs, all give same error.
Only thing I wonderd is if the makecab is the same for 2005 as it is for mobile 2006 ??
or am i going about this totally the wrong way, any help MUCH MUCH appreciated.
i use makecab comed with my winxp ( the one used to create cab for your pc)
in a dos prompt and never had a problem..
maybe you could have wrong sintax inside your xml file..
anyway here is the command I use
makecab /D COMPRESS=OFF _setup.xml whatevername.cab
they all work on my hermes.
Bye
Thanks for that, i was not using the -d setting but still gives me same problem.
I am trying to install Schapps Operator settings program, do makecab /D compress=off _setup.xml setup.cab
copy this and all the other files in one directory to the storage card of the phone and run the setup.cab, goes to ask me wher ei want to sotre it, i select device then it says "Schaps operator setup cannot be installed', this is the same with another program i try to install.
Arrrrgggghhh !!!!
wait a moment.. what you mean when you say program?
with this command you can only "store" an XML file into a cab file.
This xml should be something simple like a provisioning xml file not
a program.
To create a cab file to install a program you need a different tool
(something like wince cab manager), more complete and powerful.
Ciao
J
jarod_73 said:
i use makecab comed with my winxp ( the one used to create cab for your pc)
in a dos prompt and never had a problem..
maybe you could have wrong sintax inside your xml file..
anyway here is the command I use
makecab /D COMPRESS=OFF _setup.xml whatevername.cab
they all work on my hermes.
Bye
Click to expand...
Click to collapse
Hi jarod_73,
i have just created cab file using your instruction and it worked well if you are runing cab file manually.
i have startup.xml file on my device that can run cab files and install them to any folder i want on my windows mobile device.
my question is.. after i added my new file xxx.cab then i noticed that allthugh file exist and even runed it, then it doesn't install it automatically.
only manual operation can run this cab.
do you have any suggestions?
thanks
ran.
msward3380 said:
Hi,
I have searched and searched for the answer to this but can someone please help.
have downloaded some add on's, the dir includes the _setup.xml file which i believe i have to change to a cab file using makecab.exe, i have done this and copied the cab and all the other files on to the device and tried to run the cab but always get, their has been an error, the cab can not be installed. Tried it with several programs, all give same error.
Only thing I wonderd is if the makecab is the same for 2005 as it is for mobile 2006 ??
or am i going about this totally the wrong way, any help MUCH MUCH appreciated.
Click to expand...
Click to collapse
Same problem here and it use to work for me..maybe its windows 7 i dunno
so i have the 8525 and PDAVIETs v22. i need to get shaps config tool on my phone but i am clueless as what to do. ive downloaded it and i opened it up in WinAce, but now i am just dumb...
any help?
drant19 said:
so i have the 8525 and PDAVIETs v22. i need to get shaps config tool on my phone but i am clueless as what to do. ive downloaded it and i opened it up in WinAce, but now i am just dumb...
any help?
Click to expand...
Click to collapse
What's WinAce? you downloaded the CAB file? transfer the cab file to your phone's storage card, and click on it to install??
drant19 said:
so i have the 8525 and PDAVIETs v22. i need to get shaps config tool on my phone but i am clueless as what to do. ive downloaded it and i opened it up in WinAce, but now i am just dumb...
any help?
Click to expand...
Click to collapse
apparently you downloaded the zip file. well, download the *.cab file or extract the *.zip file you already downloaded and transfer it to your device and then click on it... finished
man, you managed to install a new ROM on your device, but you don't know how to instal an application