Develop Bugs

Automatic install (CAB,REG,TSK,Files) after HardReset

I have made s script which installs all files in my Install-Directory of my SD-Card. The script is based on nscriptm and invoked automatically after HardReset.
It installs silently all CAB-Files, Reg-Settings in REG-Files, a TSK-File.
It copys all wanted files automatically from the SD-Card to the PocketPC (e.g. for the Windows-Folder, etc).
It deletes wanted files from the Pocketpc.
It copies Shortcuts.
So a complete new Install lasts only a few minutes. Great for testing.
Now I am searching an unzip/unrar/uncompress/... - Tool which can be invoked from the command-line with additional parameters to uncompress all Install-Files on the SD-Card.
Anyone knows ?

Sounds like an excellent idea. Can you share your script? Sorry I do not know of a zip utility. All installs on cab files are already compressed though.

Doed Pocket WinRar will do the job?
I also would love to try it...
Very good idea

This sounds like a great idea.

No, Winrar is only with GUI. No Commandline. Have searched for days.
CAB-Files are not Compressed I think. Only the EXE-Files containig the CAB-Files for Install on PC are compressed.
Please HELP !
I have made an extended ROM which runs my script now automatically.
If you want it send me PM.

I have also been searching the net for a compresion tool that runs from the command line, but with no luck.

I have made an extended ROM which runs my script now automatically.
If you want it send me PM.
Click to expand...
Click to collapse
axbl,
would love a copy of your script. For everyone's benefit, can you attach it to this thread?
thanks in advance.

axbl said:
No, Winrar is only with GUI. No Commandline. Have searched for days.
CAB-Files are not Compressed I think. Only the EXE-Files containig the CAB-Files for Install on PC are compressed.
Please HELP !
I have made an extended ROM which runs my script now automatically.
If you want it send me PM.
Click to expand...
Click to collapse
Hi axbl, would be happy to test your script, email is [email protected]

Hi axbl,
Could you please also post me a copy of your ROM / Script ?
Many Thanks,
Justin
[email protected]

Has anyone heard from axbl? While waiting in vain, I decided to give this a shot and see how far I go along scripting my installs. I find the nscriptm tool to be very capable but still I am stuck in a few areas which axbl seems to have excelled based on the initial post.
How can one trigger a cab file install and make it a silent install? I am using the Shellwait("") command to trigger the cab file installs one after the other but those that require input are causing an issue.
Next I have tried automating the response to those user input prompts (i.e YES / NO etc) but I am having trouble catching the window handle of the prompts and then using the Sendkey command.
Thanks in advance for all the help. Regards

I use the software call Autoconfig.exe which is included in O2 Asia ROM.
The Autoconfig.exe will read Autoconfig.txt file and execute according to the command line in the file.
The command line is exactly the same as Config.txt
[.......] <---- Section to be selected
CPY1:   <---- copy from
CPY2:   <---- copy to
EXEC:   <---- Execute Program
CAB:    <---- Install .cab file
RST: Reset <---- Soft Reset
I can do what I need about 80%. I say 80% is because after this process ended. I still need to put in name/pasword to all of those s/w or else it will still be trial version.

no more?
so any update in this topic??
....pls

little_frog said:
I use the software call Autoconfig.exe which is included in O2 Asia ROM.
The Autoconfig.exe will read Autoconfig.txt file and execute according to the command line in the file.
The command line is exactly the same as Config.txt
[.......] <---- Section to be selected
CPY1:   <---- copy from
CPY2:   <---- copy to
EXEC:   <---- Execute Program
CAB:    <---- Install .cab file
RST: Reset <---- Soft Reset
I can do what I need about 80%. I say 80% is because after this process ended. I still need to put in name/pasword to all of those s/w or else it will still be trial version.
Click to expand...
Click to collapse
hi, if you create an xml file or a cab (need winCE cab manager) you can add all the registry details you need to register your program...but you have to search your registry to find those details.

Yes, I can do it while ago.
The post I did was a year ago. At that time, I didn't know how to do it.
Thanks anyway.

axbl said:
I have made s script which installs all files in my Install-Directory of my SD-Card. The script is based on nscriptm and invoked automatically after HardReset.
It installs silently all CAB-Files, Reg-Settings in REG-Files, a TSK-File.
It copys all wanted files automatically from the SD-Card to the PocketPC (e.g. for the Windows-Folder, etc).
It deletes wanted files from the Pocketpc.
It copies Shortcuts.
So a complete new Install lasts only a few minutes. Great for testing.
Now I am searching an unzip/unrar/uncompress/... - Tool which can be invoked from the command-line with additional parameters to uncompress all Install-Files on the SD-Card.
Anyone knows ?
Click to expand...
Click to collapse
Pls can u share the script with us it would be a great help for all of us.
thx in advance
jeet

You don't have to ask that guy. He'd never come back.
It's not that difficult to do. You need to know how to build CAB file by using WinCE CAB Manager. Then, put those REG, TSK, EXE, File, etc. into your built CAB file. By using (Autorun and Config.txt) or (Autoconfig.exe and Autoconfig.txt) or (Autorun and ExtROM via \2577 folder), You can install any CAB files into the system after Hard Reset.

ok
could you pls post the files to do it?
(Autorun and Config.txt) or (Autoconfig.exe and Autoconfig.txt)
if possible?

HELP ME - COUNTRY ID ERROR

HOW I CAN UPDATE MY JASJAR FROM JASJAR_WWE_11353_137_10301 TO JASJAR_ITA_11346_126_10301_ship??
COUNTRY ID ERROR
Thanks and excuse my english

Just unpack/extract the JASJAR_ITA_11346_126_10301_ship file into a directory.
donwload the attached file to this same directory
Run it and the Country ID error will come out, run it again right after, and it should work

what you mean with "download the attached file to the same directory"....which file??
Thanks
Carlo Salvatore :x

thanks, but the update is ok without country error, but after the reset the screen is black with word: serial and v1.0

sorry...i found out the file you put for download but if i run the rom twice after have the rom and the file in the same directory i have the same error message....coul you please help me?
Thanks
Carlo Salvatore

carsa read pm

did IT!!!!...thank a lot...

carsa help me in private, please

edoalom hope everithing was fine!

i've the same problem, can you help me, too?

directory?
carsa said:
what you mean with "download the attached file to the same directory"....which file??
Thanks
Carlo Salvatore :x
Click to expand...
Click to collapse
I've got the .exe file and it simply wants to self-install in a directory with my JJ. So, which directory should I try to install this then?
thanks.
edved

Just extract the rom required using winrar or similar (normally done by right clicking on the file and selecting extract)
donwload the file "MaUpgradeUt_noID.exe"
Copy this file into the directory
Run it and the Country ID error will come out, run it again right after, and it should work

Italian to English
I purchased an imate jasjar in Italy last week. The salesperson confirmed that I can change the language from Italian to English. But when I contacted the Imate people they say it is not possible, Can someone guide me?
Thanks Felician

hanhha2000 said:
Just extract the rom required using winrar or similar (normally done by right clicking on the file and selecting extract)
donwload the file "MaUpgradeUt_noID.exe"
Copy this file into the directory
Run it and the Country ID error will come out, run it again right after, and it should work
Click to expand...
Click to collapse
Hi hanhha2000, the required rom that I wanted to flash is with a .exe extension behind, how can we use winrar with this type of file, hope you can enlighten me as I have also ran in Country ID Error problems, thank you.

Will this technique work for my i-mate JAMin? im just afraid to screw up my device completely cos iv heard that that can happen
thanx for your help pls reply asap

I've the same problem. can you help me to solve. tnk

DeVegas said:
Hi hanhha2000, the required rom that I wanted to flash is with a .exe extension behind, how can we use winrar with this type of file, hope you can enlighten me as I have also ran in Country ID Error problems, thank you.
Click to expand...
Click to collapse
Hi,
The way i use is run the update rom and when appear the Country error, open the windows explorer and copy the folder in the temporary folder to a new location, then put the file ...noID.exe in the new folder.

Why my SPV5000 don't want 1.30 rom ?

Hi, i have a SPV5000 and i can put a lot of kind of 1.13 rom inside, like Qtek or Orange.
But impossible to put any 1.30 rom (orange, qtek french or WWE).
I've tried a lot of solution like "put the radio first" ... rest after.
Do you know if it's possible that my hardware version refuse this 1.30 rom?
I think the guy who sell me the spv sell me a pre-serie .
Thanks

The first question I want to ask is: How do you perform the upgrade? Do you use the No ID Tool? If not, try using it. Here is an instructions I made:
The file is extracted in your computer. Once you run the shipped.exe file, you need to go to:
My Computer
Your Drive (mine is Drive C)
Show the contents of this drive
Documents and Settings
Choose your folder name
Choose "TOOLS" from the menu bar
Choose "FOLDER OPTIONS"
Click on the "VIEW" tab
Click on "HIDDEN FILES AND FOLDERS"
YOU WANT TO SHOW ALL HIDDEN FILES AND FOLDERS
Now go to TEMP folder
Now you will notice a bunch of folders will show up, tons of them to be exact. What you need to do now is click on the shipped.exe file again and "LOOK" for the folder being created because that folder is what you want to copy. If you did not see it created, you have to manually open each folder and look for the files I listed below.
Assuming you found the folder, you will have these following files inside that folder:
ms_.nbf----------------------this file is responsible for EXT ROM Version
nk.nbf------------------------this file is responsible for Windows Mobile Version
radio.nbf---------------------this file is responsible for Radio Version
EnterBL
GetDeviceData
readme
ROMUpgradeUt
RUU.conf
RUU.dll
UI.dll
MaUpgradeUt_noID
If the file MaUpgradeUt_noID is not there. You need to get hold of a copy of this file as you need this.
There you have it, REMEMBER, you need to have the MaUpgradeUt_noID file plus all the rest of the file in one folder if you want to upgrade to the ENTIRE I-Mate ROM, QTEK, O2, or whatever ROM you want.
If you only want to upgrade to the radio version then you need to delete 2 files namely: "ms_.nbf" and "nk.nbf". Leave "radio.nbf" alone and click on the "MaUpgradeUt_noID" file to initiate the Radio installation. Basically those 3 files control what you want to update on your device.
Hope my instructions were clear enough for you. Hope this helps.

Thanks for your complete response
Of course i'm using the MaUpgradeUt_noID ... i have no error message during the process but at the end after the hard reset i have black screen.
and to try to only flash the radio I renames other files .
thanks
I steel don't enderstand ....

Do you think the bootloader version is important ?
i have the O.56

SEB152030 said:
Do you think the bootloader version is important ?
i have the O.56
Click to expand...
Click to collapse
It won't hurt to try and update using Boot Loader Mode.
What do you mean "0.56"?

when I put my spv in bootloader mode, I can see on the screen :
on the top : USB
Botom of the screen V.0.56

SEB152030 said:
when I put my spv in bootloader mode, I can see on the screen :
on the top : USB
Botom of the screen V.0.56
Click to expand...
Click to collapse
You might be right. Your exec must be one of the earlier version. I remeber some time ago, someone asked the same question you did. Maybe someone else can help. Have you tried upgrading it using my instructions?

thank you again and of course I've tryed your method.
every thing works with previous version but not on 1.30
i spent 3 days on it .....

SEB152030 said:
thank you again and of course I've tryed your method.
every thing works with previous version but not on 1.30
i spent 3 days on it .....
Click to expand...
Click to collapse
I believe you need to find out how to upgrade the "Serial USB" application on your Universal for the No_ID Tool to work. Other than that you probably need a version of the No_ID Tool that works at an earlier version of the "Serial USB" version that you have. I'm sorry too, if I didn't help.

Changing the Start Button Icon

I've seen a lot of people asking how folks have changed the Windows logo to the HTC one and so on. I am one of those people!
There's a thread over in the Diamond Forum here, http://forum.xda-developers.com/showthread.php?t=437307, that discusses altering the taskbar icons.
I've had a read of that but it doesn't appear to discuss the start button. I've currently got a cab installed that gave me coloured icons on the taskbar but also the 3d MS Office style start button. I like the icons but not that start button.
Is there anyway someone could provide an idiot/noob style guide for altering that icon. I'd love to have the Vista start button on my HD (attached image) but have no idea how to go about it aside from I think it has something to with .dll files.
Can anyone explain this? Anyone? I know there would be a lot of people grateful for it! I've Googled and used the search but just cannot seem to find anything!
I've attached a mock-up of my ideal; I've got the coloured icons, just the start button to go!

I think....
the explanation is to edit the shellres.192.dll file here:
http://forum.xda-developers.com/showpost.php?p=2791169&postcount=3
using the process here?
http://forum.xda-developers.com/showpost.php?p=2791165&postcount=1
No?
EDIT: I am going to try myself this evening with your very nice icon...will let you know how it goes, if you don't beat me to it!

I believe you can do it with Wisbar.
Wisbar is not free.
http://www.lakeridgesoftware.com/
​

sk806 said:
the explanation is to edit the shellres.192.dll file here:
http://forum.xda-developers.com/showpost.php?p=2791169&postcount=3
using the process here?
http://forum.xda-developers.com/showpost.php?p=2791165&postcount=1
No?
EDIT: I am going to try myself this evening with your very nice icon...will let you know how it goes, if you don't beat me to it!
Click to expand...
Click to collapse
you had a chance at it yet? did it work?

...........

This is the thread I used to alter the Windows logo to a HTC logo among other things in this thread. It's dead easy,
1) Unsign the file using Unsigner linked to in the thread further up (on page 2 of the Unsigner thread there's a .bat file that I found gave a better idea of whether it had worked or not).
2) Open the file in Reshacker and go to Icon on the left hand side and click it to expand it. Go to number 292, click it and it will expand to show 1033. Click 1033 and it should be the start menu icon. Right click on 1033 and select Replace Resource. Select Open File With New Icon and find your new (resized) icon. Double click it and it will show a preview of new and old. Click Replace in the bottom right corner.
3) Save the newly modified file.
4) Sign the modified file using Ssigner linked to in the thread above. CHECK THE TEXT FILE IT CREATES TO MAKE SURE IT SIGNED OK. Don't forget this bit as it will mean a hard reset if you do (as I learnt).
5) If you've not installed SDKCert.cab some time in the past. download it from here, copy it to the phone and install it.
6) Copy the file to the Windows directory on the phone using Resco Explorer or Total Commander.
7) Reboot the phone.

how did you copy shellres.192.dll? it says "Acces denied" even with resco. No chance to renaming also

To get the file in the first place you need a program called ROM Extractor on the phone to get the file from ROM. There are also different varients of the ROM for different locales. There's a description in the link above.

thanks for your efforts but seems a little complicated TotalCommander did the trick, resco seems to have some security check problems
anyway, unsigner doesn't work so i'm stuck

guap said:
anyway, unsigner doesn't work so i'm stuck
Click to expand...
Click to collapse
Try the .bat file in the second page of the Unsigner thread. Copy Unsigner, the .bat file and the file you want to unlock to the same directory and double click the .bat file. Also, because the file is from ROM make sure it's not marked as Read Only when you get it to your PC before unsigning it. If it's from ROM they're usually Read Only for a start.

frostywrath said:
you had a chance at it yet? did it work?
Click to expand...
Click to collapse
Not yet. Just got back from work. I need a different job...
I will try tomorrow. I have been meaning to give this s shot for a while now, and the icon you posted is what I have been looking for.

the bat only automize the process... It doesn't work anyway as it still use UnSigner

Do you have the cab to change the other icons? I had a quick look on the diamond thread but couldn't find the exact ones you have! Thanks.

guap said:
the bat only automize the process... It doesn't work anyway as it still use UnSigner
Click to expand...
Click to collapse
True, but when I tried Unsigner on it's own it didn't give any feedback as to what it was doing (or if it did I missed it) so I changed 150+ icons only to find it hadn't been unsigned and therefore couldn't be resigned. At least with the batch file I can check it's been properly unsigned before making changes.
Does it give you any error messages when you try Unsigner?
unclesomebody said:
Do you have the cab to change the other icons? I had a quick look on the diamond thread but couldn't find the exact ones you have! Thanks.
Click to expand...
Click to collapse
Do you mean me or someone else?

Prof. Yaffle said:
Does it give you any error messages when you try Unsigner?
Click to expand...
Click to collapse
that's the point: no errors from unsigner, but resourcehacker can't open my file (not valid bla bla bla)

In which case I'd say the file hasn't copied across properly from the phone. Reshacker should be able to open the file and allow editing even if it's still signed. I'd try ROM Extractor to copy the file from ROM to elsewhere on the phone and then copy that across to the PC.

unclesomebody said:
Do you have the cab to change the other icons? I had a quick look on the diamond thread but couldn't find the exact ones you have! Thanks.
Click to expand...
Click to collapse
Do you mean this cab?
http://cid-b6b1a627fbae21e5.skydrive.live.com/self.aspx/Public/Colored Top Bar.cab
Don't forget you'll need to install this first:
http://cid-b6b1a627fbae21e5.skydrive.live.com/self.aspx/Public/1SdkCerts.cab
Hope this helps.

Prof. Yaffle said:
In which case I'd say the file hasn't copied across properly from the phone. Reshacker should be able to open the file and allow editing even if it's still signed. I'd try ROM Extractor to copy the file from ROM to elsewhere on the phone and then copy that across to the PC.
Click to expand...
Click to collapse
uhm seems reasonable
but I don't want to extract all my whole rom for a stupid dll... I extracted with total commander, isn't supposed to work this way?

Nope, certain ROM files can't be copied using normal file copy programs. I've found that they try and copy, then say the "File already exists, do you wish to replace?" and then whatever you select you're left with a 0k file with nothing in it. The ROM extractor doesn't copy the whole ROM. When you launch it you get a list of all the ROM files. Double click the one you want to extract, give it a location (\ usually for the root directory of the phone) and a name and click Extract.

Ok, I will try. But how to replace when modified? If I can't even read it, how will I replace it?

[Q] Error [240] file open This is STUPID

I Read and Read and Read. The surprising part is that, what I need the most there is no video nor any instruction to fix the problem.
I'm trying to flash a ROM on my tilt 2 GSM phone.
I have already HSPL it,
I did task 29 using RhodiumWAdvancedRUU.zip because I couldn't get regular task 29 to work.
Now I get a white screen with HTC on it and it doesnt pass it. So I enter bootloader and make sure that at the bottom it shows USB. (yes I do see SPL-0.85. OliNex)
Now I try to install the ROM and here is where the problem starts.
My ROM:
I dled NRG MAXSENSE ROM which is Energy.RHODIUM.29022.Sense2.5.MaxSense.Jul.08.7z
My Rhodium Update Utility (RUU) is
Rhodium_CustomRUU_v1.1.zip
I Open it and I see
CustomRUU.exe
Here is where I don't know what to do. Some instructions say that I need a .NBH file. Where do I get this file. They say it should be with my ROM.
All I get when I dl the ROM is
Energy.RHODIUM.29022.Sense2.5.MaxSense.Jul.08.7z
Format 7z not .nbh
I get the Error [240] File Open when I run CustomRUU.exe. To fix it they say
"When this error message appears, check whether the downloaded image is placed in the DIRECTORY of RUU. If, for some unknown reason, you find that the ROM image is not located in the RUU folder, you have to download the RUU and retry again."
What is the "DIRECTORY" of RUU"? Whats a directory? I never heard that term before.
Of which RUU? CustomRUU.exe?
Do I make a folder and put CustomRUU.exe in it with the Energy.RHODIUM.29022.Sense2.5.MaxSense.Jul.08.7z ?
Where is the .nbh file? Do I rename the ROM IMAGE to .nbh?
Please give me step by step. Ive read so much already and I dont know what to do anymore. Thank you for your help.

-___- I cannot believe I spent all this time for something so dumb. We should put this on the Help for NOOBS thread. The file " .7z " cannot be opened with Winzip. To open the file you have to use WINRAR. And from there we can see the Rhodium_SoftwareUpgrade.exe (RUU) and the RHODIMG.nbh files. And double clicking the Rhodium_SoftwareUpgrade.exe the software will start walking you through the process for flashing. I think it would be a good idea to add on the HOW TO FLASH A ROM that the 7z file requires WINRAR to be opened.
But thanks to the Lord I learned how to flash the Rom successfully.
--------------------
He who provides for this life but takes no care for eternity is wise for a moment but a fool forever.
-John Tillotson

Or use 7-zip!

-Jonny- said:
Or use 7-zip!
Click to expand...
Click to collapse
Too easy lol