Related
Hi, i have a SPV5000 and i can put a lot of kind of 1.13 rom inside, like Qtek or Orange.
But impossible to put any 1.30 rom (orange, qtek french or WWE).
I've tried a lot of solution like "put the radio first" ... rest after.
Do you know if it's possible that my hardware version refuse this 1.30 rom?
I think the guy who sell me the spv sell me a pre-serie .
Thanks
The first question I want to ask is: How do you perform the upgrade? Do you use the No ID Tool? If not, try using it. Here is an instructions I made:
The file is extracted in your computer. Once you run the shipped.exe file, you need to go to:
My Computer
Your Drive (mine is Drive C)
Show the contents of this drive
Documents and Settings
Choose your folder name
Choose "TOOLS" from the menu bar
Choose "FOLDER OPTIONS"
Click on the "VIEW" tab
Click on "HIDDEN FILES AND FOLDERS"
YOU WANT TO SHOW ALL HIDDEN FILES AND FOLDERS
Now go to TEMP folder
Now you will notice a bunch of folders will show up, tons of them to be exact. What you need to do now is click on the shipped.exe file again and "LOOK" for the folder being created because that folder is what you want to copy. If you did not see it created, you have to manually open each folder and look for the files I listed below.
Assuming you found the folder, you will have these following files inside that folder:
ms_.nbf----------------------this file is responsible for EXT ROM Version
nk.nbf------------------------this file is responsible for Windows Mobile Version
radio.nbf---------------------this file is responsible for Radio Version
EnterBL
GetDeviceData
readme
ROMUpgradeUt
RUU.conf
RUU.dll
UI.dll
MaUpgradeUt_noID
If the file MaUpgradeUt_noID is not there. You need to get hold of a copy of this file as you need this.
There you have it, REMEMBER, you need to have the MaUpgradeUt_noID file plus all the rest of the file in one folder if you want to upgrade to the ENTIRE I-Mate ROM, QTEK, O2, or whatever ROM you want.
If you only want to upgrade to the radio version then you need to delete 2 files namely: "ms_.nbf" and "nk.nbf". Leave "radio.nbf" alone and click on the "MaUpgradeUt_noID" file to initiate the Radio installation. Basically those 3 files control what you want to update on your device.
Hope my instructions were clear enough for you. Hope this helps.
Thanks for your complete response
Of course i'm using the MaUpgradeUt_noID ... i have no error message during the process but at the end after the hard reset i have black screen.
and to try to only flash the radio I renames other files .
thanks
I steel don't enderstand ....
Do you think the bootloader version is important ?
i have the O.56
SEB152030 said:
Do you think the bootloader version is important ?
i have the O.56
Click to expand...
Click to collapse
It won't hurt to try and update using Boot Loader Mode.
What do you mean "0.56"?
when I put my spv in bootloader mode, I can see on the screen :
on the top : USB
Botom of the screen V.0.56
SEB152030 said:
when I put my spv in bootloader mode, I can see on the screen :
on the top : USB
Botom of the screen V.0.56
Click to expand...
Click to collapse
You might be right. Your exec must be one of the earlier version. I remeber some time ago, someone asked the same question you did. Maybe someone else can help. Have you tried upgrading it using my instructions?
thank you again and of course I've tryed your method.
every thing works with previous version but not on 1.30
i spent 3 days on it .....
SEB152030 said:
thank you again and of course I've tryed your method.
every thing works with previous version but not on 1.30
i spent 3 days on it .....
Click to expand...
Click to collapse
I believe you need to find out how to upgrade the "Serial USB" application on your Universal for the No_ID Tool to work. Other than that you probably need a version of the No_ID Tool that works at an earlier version of the "Serial USB" version that you have. I'm sorry too, if I didn't help.
ok heres what happened first i installed hardspl and then i changed my radio to 1.27.14.09 and when i restarted my att tilt the att stuff went on then nothing it never went to the main screen, now how can i reinstall a radio or just the att stock software without using activesync
Go to the bootloader - check the wiki for instructions. Connect your computer to the Tilt - you should see "USB" below the tri-color screen. Install the new ROM or radio. PM me if you have problems.
P.S. The answers to any problems you find are readily accessible in the Kaiser section.
shrshr429 said:
ok heres what happened first i installed hardspl and then i changed my radio to 1.27.14.09 and when i restarted my att tilt the att stuff went on then nothing it never went to the main screen, now how can i reinstall a radio or just the att stock software without using activesync
Click to expand...
Click to collapse
Check the wiki for sd flash. You kan rename the nbh file to KAISIMG.nbh and put it on a sd then goto bootloader and it asks you to install.
im sorry what's wiki and also I can't find software that will let me download the software without activesync does anyone have a link I can use
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
You should be able to find everything you need here.
i tried everything there, theirs just one problem i cant find a rom that i can use without activesync does anyone have one
When you attach the cable and go to bootloader - does it say "USB" below the tri-color screen? If so, you have communication and can flash.
What do your three lines say at the top of the bootloader (red section)?
it does say usb my computer is reading the phone i just cant find a rom that doesnt use activesync, nothing with RUU_Sign.nbh, i did use hardspl the 3 lines say
KAIS1*0 MFG
SPL-1.0.01iPof
CPLD-8
i do have a microsd card i can try and upload it through their but there is stil the problem with no activesync
so can anyone help me here
ok, since i never really seen this question answered directly anywhere, you get this freebie
how to extract the RUU_Signed.nbh file
If its a cooked rom, the file you download will *usually* be a .rar file, extract the contents with winrar. depending on how the cook packaged it, it may not be named RUU_Signed.nbh, but it will still be a .nbh file
If its an original shipped rom, the file you download will be a .exe file, again, extract the contents with winrar. There will be a bunch of files and the RUU_Signed.nbh will be one of them.
if i downlaod the original rom it just opens up a program to install it how can i extract it without using the program to connect to my phone
omg!!!!!
1. install winrar
2. right click on the file you downloaded
3. choose "extract here"
then do the flashing using the microsd card
I am having a helluva time getting the .exe to extract. Keeps saying damaged or unknown file format.
RUU_Supersonic_1.32.651.1_Radio_1.39.00.04.26_release_171253
Need it because the regular way to update and unroot is not working for me, and need to just flash from the recovery menu. Any help would be appreciated.
Tried 7zip and winrar
linflas said:
I am having a helluva time getting the .exe to extract. Keeps saying damaged or unknown file format.
RUU_Supersonic_1.32.651.1_Radio_1.39.00.04.26_release_171253
Need it because the regular way to update and unroot is not working for me, and need to just flash from the recovery menu. Any help would be appreciated.
Tried 7zip and winrar
Click to expand...
Click to collapse
try this.
goto your temp folder.
ex. win 7: C:\Users\CYBERxNUKE\AppData\Local\Temp
and make sure all your programs are closed and delete all your temp files.
Run the RUU program, and once its up and running on your screen, go back to your temp folder....
C:\Users\CYBERxNUKE\AppData\Local\Temp
look for a new folder created there.
without closing the RUU, copy the entire folder over to a safe place and exit the RUU.
you should have what you need.
Stock RUU Roms http://bit.ly/c1jNWR
I can't seem to find one anywhere. All the links I am encountering are dead. Does anyone have this file laying around or know where I can get it? My evo is dead right now and from everything I've read this is what I need to get it up and running again. Thanks in advance.
Sorry but, RUU zip? Lol thats like saying you need a JPG word doc.
Anyway, I don't think you searched hard enough, look up "supersonic RUU's" on google, first hit. Download from there, they're hosted on team nocturnals website.
Lol right, been seeing a lot of these lately. And it seems only people who put in the op that they are "noobs" are the only ones who can't find this stuff. But, Phandroid is way worse about this. Which is funny because the sticky at the top of the forum has all the links and instructions to root and unroot every h-boot and hardware version. So what I'm saying is please people just LOOK, it's all you have to do, please.
Sent from my PC36100 using xda app-developers app
you may find the ruu your looking for here.... http://shipped-roms.com/index.php?category=android&model=Supersonic
but the ruu will be a zip
if you want the zip, IE - PC36IMG.zip you will have to extract it.
i just did this exact thing today. i needed the shipped and pre-release ruu for some goodies contained within. followed this guide...
http://forum.xda-developers.com/showpost.php?p=26541170&postcount=1
just rename ROM.zip to PC36IMG.zip instead of PG58IMG.zip
here's the gist of that thread you need to perform.
4.1 Getting PG58IMG.zip from RUU
Run the RUU executable as you normally would, but don't proceed to the second step i.e. when a second window appears, do nothing. Do not proceed, just ignore it for now, but don't close the window.
Right-click the Windows Start button and select "Open Window Explorer" option.
If you use Windows XP
Copy-paste this in the navigation bar:
Code:
C:\Documents and Settings\%USERNAME%\Local Settings\Temp\
If you use Windows Vista/7
Press & hold Windows key on the keyboard and then press R (Win key + R). Once the box pops up, copy paste this:
Code:
%temp%
Right click anywhere inside explorer window (not on any folder) and select Sort by then select Date.
Locate the latest one created (first in the list & it will most likely have random numbers in the name) & open it.
You will find a second folder with a set of random numbers. Open it, inside you will find a number of files and the rom.zip
Copy the rom.zip file to another location.
Now, close the RUU executable folder & rename the rom.zip file as PG58IMG.zip
Click to expand...
Click to collapse
Extracting ROM files from HTC RUU
Official HTC ROM updates are released as RUU (ROM Update Utility), which you run on your (Windows) PC to get the target device updated automatically.
Some of the big brains in the Android community release RUUs re-packaged into signed update files,
which in turn allow for whatever ROM customization you can imagine.
In this how to I will explain how to extract ROM files from a RUU image,
which you can then customize and use to flash your device without the fear of a new bootloader possibly making your device unrootable.
Requirements :
Windows PC,
Microsoft Process Monitor,
File Archiver capable of extracting ZIP files(eg, 7ZIP),
Official HTC RUU for your Android device.
The process of extracting ROM files from a RUU is really straightforward.
The idea behind it is that the self-contained update utility first needs to unpack the update payload into a temporary folder before pushing it onto the device.
This is when we grab the ROM file...
1. download the official RUU
2. start Process Monitor.
3. press CTRL+L
4. change "Architecture" to "Process Name"
5. leave the "is" field as it is
6. in the empty field copy and paste the name of your
RUU file (eg, RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed.exe)
7. click "Add"
8. change "Process Name" to "Path"
9. change "is" to "Contains"
10. in the blank field type "rom.zip" (without quotes)
11. click add
Click "OK" to set the filter and then run the RUU file.
Once the utility starts switch back to Process Monitor and look for an entry in the "Path" column that ends with "\rom.zip".
Right click on that line and select "Jump to..."
this will open a Windows Explorer window in the folder which contains the zipped ROM files
Copy the "rom.zip" file to some other folder, outside of the temp RUU folder tree (eg, desktop)
Once copied, close Process Monitor and the RUU utility.
The copied "rom.zip" file contains the following files:
android-info.txt - list of CIDs this RUU will flash to,
boot.img - root file system image,
hboot (followed by a version string) - boot-loader update,
radio.img - radio driver update,
recovery.img - recovery partition image,
splash1_Hero_320x480.nb0 - boot loader splash image,
system_rel.img - system partition image,
userdata.img - data partition image.
You can now, among many other things, root the ROM
and then flash the updated boot.img and all the other image files on to your device using Recovery
it doesnt work... the process monitor colum is all blank after running RUU... there are no processes listed
munnibhai said:
it doesnt work... the process monitor colum is all blank after running RUU... there are no processes listed
Click to expand...
Click to collapse
you mst be doing something wrong i double checked the method and it still works fine for me..
make sure your environment is set up correctly and run everything as administrator or disadle uac in windows..
thanks for the reply, let me check it again...
i will post back to u
rom.zip corrupted
I followed the directions and like another post in here procmon shows a blank screen. I went to task manager and opened processes and saw when it ran then clicked open file location and found it. I did this twice and both zips are corrupt. (used winzip)
error [D:\android apps\EVO root\EVO\rom.zip]: start of central directory not found; Zip file corrupt.
Possible cause: file transfer error
when I close the RUU all the files in that folder disappear so you have to leave the RUU running while you copy the zip file or it's gone.
At least that's what I saw.
update to last post
I found a zip repair tool and was able to repair and extract the 1.10.653.2 RUU rom capture. I will have to try to run it later. If anyone gets corrupted zip error, Zip Repair pro will repair it.
To get the rom zip without any errors just run the ruu.exe file, when the box with a picture of a phone pops up, click start on pc, type in "run" and click on run then in that box that pops up, type in %temp% and click ok. Another window pops up then just scroll down to the most recent folder and rom.zip will be in there, if not it will be in the next folder.
Hi,
when I try to open the rom.zip I get an error message, it just said it cannot open with 7zip and with windows it says its invalid.
I tried downloading the RUU multiple times but still the same error. I rune the RUU as administrator.
Tried copying it over to different locations and then open it.
RUU_ENRC2B_U_JB_45_O2_UK_1.14.206.13_Radio_3.1204.167.31_release_289474_signed
HTC ONE X+
Thank you
Update:
I used Zip Repair Pro.. however there is no boot.img inside the repaired zip -_-
For those which have problem with making Process Monitor detect RUU temp folder, make sure You add whole file name of RUU including .exe at the end.
Jmcclue's steps, work perfectly, Thank you post #7
htc RUU Rom
Inside 4ndroid said:
Extracting ROM files from HTC RUU
Official HTC ROM updates are released as RUU (ROM Update Utility), which you run on your (Windows) PC to get the target device updated automatically.
Some of the big brains in the Android community release RUUs re-packaged into signed update files,
which in turn allow for whatever ROM customization you can imagine.
In this how to I will explain how to extract ROM files from a RUU image,
which you can then customize and use to flash your device without the fear of a new bootloader possibly making your device unrootable.
Requirements :
Windows PC,
Microsoft Process Monitor,
File Archiver capable of extracting ZIP files(eg, 7ZIP),
Official HTC RUU for your Android device.
The process of extracting ROM files from a RUU is really straightforward.
The idea behind it is that the self-contained update utility first needs to unpack the update payload into a temporary folder before pushing it onto the device.
This is when we grab the ROM file...
1. download the official RUU
2. start Process Monitor.
3. press CTRL+L
4. change "Architecture" to "Process Name"
5. leave the "is" field as it is
6. in the empty field copy and paste the name of your
RUU file (eg, RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed.exe)
7. click "Add"
8. change "Process Name" to "Path"
9. change "is" to "Contains"
10. in the blank field type "rom.zip" (without quotes)
11. click add
Click "OK" to set the filter and then run the RUU file.
Once the utility starts switch back to Process Monitor and look for an entry in the "Path" column that ends with "\rom.zip".
Right click on that line and select "Jump to..."
this will open a Windows Explorer window in the folder which contains the zipped ROM files
Copy the "rom.zip" file to some other folder, outside of the temp RUU folder tree (eg, desktop)
Once copied, close Process Monitor and the RUU utility.
The copied "rom.zip" file contains the following files:
android-info.txt - list of CIDs this RUU will flash to,
boot.img - root file system image,
hboot (followed by a version string) - boot-loader update,
radio.img - radio driver update,
recovery.img - recovery partition image,
splash1_Hero_320x480.nb0 - boot loader splash image,
system_rel.img - system partition image,
userdata.img - data partition image.
You can now, among many other things, root the ROM
and then flash the updated boot.img and all the other image files on to your device using Recovery
Click to expand...
Click to collapse
this is good working 100% thank you :good:
i_4_u89 said:
this is good working 100% thank you :good:
Click to expand...
Click to collapse
no problem and please instead of saying thanks please remember to hit the thanks button on threads first post..
works great, to bad you cant open the zip file
jpwhre said:
works great, to bad you cant open the zip file
Click to expand...
Click to collapse
You can open the zip. Go back a page n try the way i said.
jmcclue said:
You can open the zip. Go back a page n try the way i said.
Click to expand...
Click to collapse
note path is desktop (last post showed from temp folder) and i still get same results. did some searching and aperantly htc now signs their zip files and they can't be opened anymore. having usb issues that causes fastboot force close errors and need to be able to flash boot.img thru flashify app to return it to stock. ran the htcguru reset rom that uses aroma installer to return to stock that lets me take ota's but i get qualcom location force close and other custom roms give me issues forcing me to reset phone to stock every few days with guru installer. flashing recovery in fastboot is a chore as well. I have s-off and can keep it, but doing fastboot oem lock wont relock the bootloader, even though it shows success in cmd line. i can cid and super cid with fastboot.
it leaves me at a point where i really need to pull everything out of the rom.zip file and it wont open.
pic 1, 7zip wont open archive on desktop
pic 2, how i get recovery to flash
pic 3, results from running RUU
i have to reboot device, set comand to reboot bootloader, set command to flash recovery all faster than phone will do all commands to get it to flash, and RUU doesnt work that fast. i know im on sprint with htc one m7, but google search "extract htc zip" "extract rom.zip" both lead to this thread as top result. no other searches will tell me how to open the archive, except one that resulted in "htc signed zips can no longer be opened"
you're more than welcome to give it a go
http://forum.xda-developers.com/showthread.php?t=2795856 Sprint_HTC_One_m7wls_5.05.651.2_RUU.exe
Did HTC change the way they create the exe? I don't find it, the biggest file is data1.cab file that I can't extract.
I'm trying to extract the stock rom for an ATT HTC One Mini (m4) because RUU keeps crashing on me and won't install. I am also rooted with S-off.
If anybody can help me get the stock m4 rom so I can go back to stock, I would really appreciate it.
SyPete said:
Did HTC change the way they create the exe? I don't find it, the biggest file is data1.cab file that I can't extract.
I'm trying to extract the stock rom for an ATT HTC One Mini (m4) because RUU keeps crashing on me and won't install. I am also rooted with S-off.
If anybody can help me get the stock m4 rom so I can go back to stock, I would really appreciate it.
Click to expand...
Click to collapse
No they didn't change it. Some ruu's use a different format requiring the use of a tool called unruu instead of trying to capture the zip file when using the exe (I just learned this today). I've gone ahead and used unruu and the resulting zips have been put in a single tar file. you can download it from here for about 30 days after which ill have to delete the file. also i dont know which zip has what in it.
hi
master how to open Zip firmware !!?
i want to open zip firmware (PM60IMG.zip Desire 400)with 7zip ! but shows below error :
"can not open file PM60IMG.zip az archive "
how to pass this encryption ?
gandolf007 said:
hi
master how to open Zip firmware !!?
i want to open zip firmware (PM60IMG.zip Desire 400)with 7zip ! but shows below error :
"can not open file PM60IMG.zip az archive "
how to pass this encryption ?
Click to expand...
Click to collapse
https://github.com/kmdm/ruuveal/tree/f4936338f19841c75edafbe7e622242105cb39aa