My friend tried to do something with (t)his gps and ended up with frozen splash screen.
I tried to help him and put igo on it by changing mgnshell.exe to mngshell123.exe and igo.exe to mngshell.exe.
Now i'm having WORKING igo but i CAN NOT access anymore to hdd of this gps by USB cable.
Definitely i did stupid thing here.
This model does not have reset button only slide on/off .
PLEASE (to the expert one) can you tell me HOW to UNDO this change of names? How can i access to hdd of gps?
What can i do?
THANK YOU (in advance).
simcheee
Any suggestions?
i need help i tried to hook my gps to my computer now when i turn it on it has a pic of a laptop with a usb cable going to a pic of the gps with a red x thru it what do i do
Related
Hi all
Okay i plugged an external aerial into my XDA Orbit (1) just to try it out as i work in the basement now my phone will pick up nothing without an external aerial plugged in as they say WTF is goin on thx for any help.
Matt
no phone signal after external antenna
Hi Matt,
I had the same problem as you decribe. After i connect a external GSM (phone) antenna
at the backside of my device i can not received any GSM (phone) signal.
Display shows that the device is still searching for a GSM-signal.
So i think that this is a problem which often happen by this type of device.
Also the GPS is not working because the device could not find any satelites.
It still searching for satelites, just the same as the GSM-signal.
So i think that something has broken, a contact from the internal antenna or maybe a shortcut in the circuits when we plugged the external antenna.
I have send the device to HTC and they did not repair it but they give me a another new device, only the inside parts are new not the outside case.
Hope that you could do something with this info.
Kind regards
Davidoff
I had this problem without pluging in an external antenna
try going to comms manager and click the phone icon to turn off the phone radio, then turn off the phone with the power switch...
Now turn on you phone again... this should turn the phone radio back on and it should work...
Puggs
I have bought BA and im very happy with it.... but i dont have any cable for it and i wanna flash from wm03se (original system) to wm05 can i do that with bluetooth? I live in serbia and a cable for him is very expensive... anyone help please???
I have another question, when press down on buttons below those four buttons on front of the phone i need a little harder to press, same to answer button, can i clean it somehow.... THANKS
I seriously doubt it, as flashing requires rewriting the internal memory, that AFAIL can only be done when the device is in bootloader.
Is there any other way to flash phone? And please help me about buttons??
You can flash through the memory card if you can't do it via sync cable.
Can anyone show how to flash through memory card step by step? or drop some link here?? THANKs
As a start, I'd try the wiki. http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
i have read all about flashing but have not found how to flash with memory card... please help... thanks
I dont want to be annoying but HELP!!!! please
If you can't find anything on SD Card flashing, it may not be possible with your device.
I was hoping this was possible as well.
The BA I just got from Ebay stopped working while connected to the cradle or sync cable. When I first plugged it in to my sync cable I noticed it was kind of wobbly, and instead of showing the amber charging light it showed the red light. Putting it in the cradle it wouldn't do anything either until I left it on for a few hours then tried to do a hard reset.
After that it still wouldn't work on the sync cable, but did work on the cradle. So I flashed it from the original ROM to one of Xplodes to see if that would help. Well it works fine and I was able to upgrade on the cradle, but it still wouldn't work on just the sync cable.
Just yesterday when I tried to plug it into the sync cable again to see if it at least would charge while on it, I noticed that when it was on and I plugged it in the screen dimmed with a bunch of lines eating away at the screen. Finding that odd I unplugged the sync cable, rebooted it (worked fine) and put it back on the cradle. The moment it came in contact with the connection it again dimmed and got the wierd garbled screen, eventually going black and showing the red light instead of the amber light.
I also just noticed that the phone doesn't work. I was so worried about setting the thing up that I didn't even check that basic functionality!
So, here I have a BA that doesn't have a working phone, and can't be synced. The wi-fi seemed to work at least.
So is there any way to change the ROM back to OEM using the SD card, bluetooth, IRDA, or wi-fi? At least then I can try and send the thing back to the Ebayer I got it from. If I send it back now they'd see I have WM 6.1 on it and probably tell me I'm SOL.
Greetings,
I have an HTC 3301, unlock, with Shady WM6.5 rom. I´ve had a problem with a replacement battery (bought from eBay) my older battery (it was heating) and changed to the original one.
After this issue, I could not use usb connectivity anymore.
Plugged with the USB cable, but Windows does not detect anything, but still charges the device.
Plugged the headset and it still working flawlessly.
I´m syncind using bluetooth, but lose the usb connectivity sucks.
I dunno what to do. Any ideas?
Thanks
Hi There
Firstly have you got the latest activesync?
You will need 4.5
If you already have this remove it from your PC download and reinstal a new one as I have had a few connection problems in the past and this does seem to solve the problem.
It might also be a good idea to do a hard reset on the phone if you have not done so yet as this generally cures most issues.
Hope this helps.
Dixiesmu said:
Hi There
Firstly have you got the latest activesync?
You will need 4.5
If you already have this remove it from your PC download and reinstal a new one as I have had a few connection problems in the past and this does seem to solve the problem.
It might also be a good idea to do a hard reset on the phone if you have not done so yet as this generally cures most issues.
Hope this helps.
Click to expand...
Click to collapse
Thanks for the reply but I can sync using Bluetooth connection and did not changed any settings since I got everything working almost a year ago.
Anyway, I just solved the problem. It was hardware related. I found a bent pin on the device USB port. Whith needles and some patience I could put it back to its place. Now everything is working fine again.
stormvice said:
Greetings,
Plugged with the USB cable, but Windows does not detect anything, but still charges the device.
Plugged the headset and it still working flawlessly.
I´m syncind using bluetooth, but lose the usb connectivity sucks.
Thanks
Click to expand...
Click to collapse
I had the same problem sometime ago. I've changed the wire first but nothing happened. My speaker, my Mic was dead and I could switch on FMRadio without the Hands-free!!!
What I did...??? I updated my mobile's Radio with 3.39.90 Version. How can you do this without active sync???
1. Remove SIM Card and Storage Card from the Mobile.
2. Press and Hold the Right Button (Recording Button) and Press together the Power Button. You will be in the Bootloader Screen. Try to update the Radio first.
3. Check it if it's working ok.
2nd way...
1. Copy the official ROM of WindowsMobile to the Storage Card.
2. Press Right Button (you know the Voice Rec) and holding that press the Power Button...
the mobile will be bootloader mode and will try to install the official ROM from the Storage Card...
wait a bit and then when it finish, check it if it is working properly!
Hope to help... waiting to "hear" sorry, to read good news
Hi,
I got 2 problems with connecting my HTC Desire HD to the PC.
First:
When I connect the cable and use charge only it's automatically used as HDD (if asked or automatically), I first have to switch on the menu to HDD and then back to Charge only, then it's working. Is this probably a known bug or even an app problem?
I remember I had this on 1.32 stock, on LeeDroid 1.5 and now on LeeDroid 2.2.2.
Second:
Probably a HTC issue with "screen off"..
I use a docking station to connect an audio speaker to it while the DHD is on it and the PC is also connected to the docking station, so I can use the HDD and adb etc.
When I use adb with screen on I can send input keycodes over adb to adjust the volume and they will be interpreted. If the screen is off I don't get a message but nothing else happens either.
Can somebody explain me what the problem is if I'm not alone with this?
Does someone know another way how to set the volume directly without keycodes and also retrieve the current status of the volume?
Hope somebody can help me.
Cheers
Aynone?
1. Did u try to change settings on the phone, to automaticly choose ur mode, not to pop up every time u connect it
Hi there,
Hope my post is in correct section and my english will be explicit.
So in first time, thanks to the community for all work done on this, i little mod my Unit with ur fantastic work.
In second time, i had an accident with my car on the road (a ****ing guy hit me on my rear left and do a 360° ...) and since that, i have no wifi with my unit, do cant update any app, can use my GPS (Waze), cant hear somes song and more...
When i try to put wifi ON, the slide go on "ON" during 5sec and after, go back in OFF. I check the M.A.C Adress and is blank, so, opening the unit for check the board and nothing seems to be brake.
I try to update my unit, android, MCU but nothing work, so i hope u can help me, cause Erisin dont reply to my problem.
Thanks
Hi
Did you checked if your wires are ok? Maybe the accident caused some connections to get loose.
Enviado do meu SM-T330 através de Tapatalk
I allready check but nothing seems to be broke.
I search for the card board détail for find wifi module but i didnt get them
Your USB chip died, just like mine did. Took away all that had something to do with usb, such as wifi, external disc option, 3g...
Nothing can be do for repair ?
The front usb work for u ?
Nitro-TecK said:
Nothing can be do for repair ?
The front usb work for u ?
Click to expand...
Click to collapse
None of the usb ports work because usb controller died on board.
First my wifi started to go off by itself, and soon enough nothing worked that could be connected to usb.
You should change the mainboard, or buy another device.
But first try factory reset.
In my case, front USB work (just the mini USB/USB cable move a lot, so i lost connection).
I allready try a factory reset and dont work too. For information, when i put WIFI dongle on USB Front, i can swap wifi ON too., but this dongle work on my computer.
Where i can find a mainboard ?
From your seller, I guess...