I've tried the following ROM and I ended up using ArpegGioMod 0.8 with Link2SD now.
SimplyGio 1.3
CyanogenMod 7.1 KANG (RC-3.0)
Cy4noobsMod-7.1.3.1
ArpegGioMod 0.8
I'm using cyan kang RC 3.0, phiexz
little confuse,, However still remembering my former rom, Particle, by hyriand
the former has wifi problem, but the music player n effect was excellent, and also no problem, except mount warning issue...
the RC 3.0 I'm using now is promoted to be having wifi worked,,,
but I never found this rom that way, Im stucked to decide which way should I...
hi, what about your rom,,,
can u describe and tell about those following roms by your opinion???
SimplyGio 1.3
Pretty stable and supports other language, my dad has been using it on his Gio for over a month now.
CyanogenMod 7.1 KANG (RC-3.0)
I had some issue with GPS and split camera screen, other than that it has been pretty good and I used it for about 3 weeks between RC2 and 3. I'll probably go back to this again later.
Cy4noobsMod-7.1.3.1
Had some issue with market and S2E but didn't spend too much time on this ROM.
ArpegGioMod 0.8
Having some problem with Link2SD now and I'll try the 0.8.1.1 boot and dtapps2sd later.
I'm choosing between ArpegGioMod and CM 7.1 RC3 depending on what dtapps2sd is like on the ArpegGioMod.
For your wifi problem, did you load the modem file when you load the Particle ROM?
I am using CyanogenMod 9
Im am using Cyanogenmod 7.2 because in Cyanogenmod 9 im stuck in Bootloop every time i try (i probably tryed it more than 10 times)
PS: Sorry for my bad english, im from Germany
CM 7.2, FTW
Im using te BNC rom
Sent from my Gio GT-S5660M using XDA App
Walter1997 said:
Im am using Cyanogenmod 7.2 because in Cyanogenmod 9 im stuck in Bootloop every time i try (i probably tryed it more than 10 times)
PS: Sorry for my bad english, im from Germany
Click to expand...
Click to collapse
Germany and M model ??
Tried wiping data, mount system before etc??
Sent from my GT-S5660 using xda premium
I've had success with cm7.2, cm9 and arpegiomod.
I am currently using cm7.2 because it's the one I find to be the most stable of the bunch. CM9 is quickly catching up though, looking forward to using it full-time in the near future
I'll be making one...
I've used:
Cm7.1 didn't use very long
Cm7.2 most stable custom ROM for me
ArpegGioMod 0.8 best ROM based on stock for M.
Particle ROM worked great for me as long as you preserve your baseband. Second best stock ROM for M. Kernel works great for overclocking and scripts.
Sent from my GT-S5660M using XDA App
I use this ...
particle.blurringexistence.net/samsung-gt-s5660/roms
I'm now using GioPro v1.4 and yesterday I've used CM9..
CM9 is good enough, but the battery life isn't so good..
GioPro 1.4, but I'm going back to SimpliGio, or maybe see if I can get CM7 or CM9 working.
The problem is, I was a newb and flashed by modem. Now I can't connect to Virgin/Bell (ie no SMS, phone calls, nothing).
Anybody know where I can either get a stock modem for the GT-S5660m or stock firmware for it and extract the modem? Most of the "official" firmwares I've seen have been for the non-m model only.
Go to sammobile.com
Sent from my GT-S5660 using xda premium
voetbalremco said:
Go to sammobile.com
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
In Firmwares, right?
I only see for the GT-S5660 non-M model. And a GT-S5660V version? What's that?
Edit: Nvm, it's for Oceania.
If you see regular thread, search for something with MUG baseband, its also for M model
Sent from my GT-S5660 using xda premium
If you see regular thread, search for something with MUG baseband, its also for M model,
Sent from my GT-S5660 using xda premium
I don't entirely understand your post. Do you mean search the site itself or the forum?
And what, exactly, would I search? "MUG baseband"?
Should I just make a new topic? Don't want to take over this thread...
Also, my phone is confused. I just tried flashing the GT-S5660 firmware at sammobile, and my phone shows it as being GT-S5660L. Is that because of the firmware or is that really my model number?
I meand to say this
[25.07.2011][Android 2.3.4]
http://forum.xda-developers.com/sho...[ROM] S5660MUGKG3 [25.07.2011][Android 2.3.4]
This is a stock rom for s5660m, newest if im not wrong
Sent from my GT-S5660 using xda premium
Related
Hi all,
I bought my defy last week. It came with 2.2.2.
I hv rooted it and have installed Clockwork Recovery and 2nd Init (the versions adviced by Quarx).
I am all set to flash a custom rom, but dont know which version to install.(RC0 or RC1, + 2.3.3 or 2.3.4 )
I have green lens. (Soc module, NOT BAYER )
I also wish to preserve my downgradability.(just in case if I wud need to seek warranty in future)
I shall be really thankful if someone could give me the direct link to the ROM best suited for me. Bug fixed ROMs shall be appreciated.
T.I.A.
Sent from my MB525 using XDA App
Try everything. I prefer cyanogenmod and the latest nightlys but used miui and leaked gigngerbread for a while. If you dont flash leked gingerbread sbf you can always downgrade to stock
Sent from my MB525 using XDA App
Flash the CEE DEBLUR sbf and then CM7 nightly from 0822. People seem to have much success with that one.
Sent from my MB525 using xda premium
Could I get the link to best version of cm7 ??
Sent from my MB525 using XDA App
this is the 110822 BOOT179-4 nightly, im using it, and a lot of others, seems to be the best one so far.
Thanks a lot for the link.
By the way, is this nightly better than the RC1 v2 version being provided by Quarx?
Also are there any bugs reported in this version linked by you?
And lastly, will I have to install any post installation fixes ??
Plz do reply quickly, I cant wait to flash GB in my phone
Sent from my MB525 using XDA App
i hv cm7 RC1 v2 installed. How shall i upgrade to this nightly?
Shall i install the zip through recovery? Do i need to wipe data/cache before flashing the nightly?
Will this nightly enable full screen recording?
T.I.A
Wich kernel recomende you to put Cyanogen Mod 7.2 and 9 on my Xperia Play?
Either the one that comes with the roms OR one of the custom kernels that others have made in the dev section
Sent from my R800a using XDA App
Thanks I'm using the from one. All running OK!
Sent from my Xperia Play using xda app-developers app
thatsupnow said:
Either the one that comes with the roms OR one of the custom kernels that others have made in the dev section
Sent from my R800a using XDA App
Click to expand...
Click to collapse
Was that a serious answer?
To simplify:
Q. "What kernel should I use"
A. "Use one of the kernels"
That's essentially what you just said.
@OP Use either the standard kernel that comes in the .rar (called boot.img) OR use the mjolnir kernel. (I'm talking about CM9 only here).
I'm using boot.img inside the zip of rom. Thanks!
Sent from my Xperia Play using xda app-developers app
I experience very high batterydrain in CM 7.2 RC 2 ....
I lost battery from 100% to 38% in just 1 night!!! Wifi etc. are off, just stupid 2G.
Any idea why that is happend? I reflashed the rom, to be sure everything is correct, but nothing has changed...
please help me!
PS: i am using the stock Cm 7 kernel...
Hey guys, after searching several thread about Good Battery life Kernel, i concluded that Cow kernel is the saver one. Is it right?. And, Is my Bagux ROM suitable for Cow Kernel?.
Sent from my GT-I8150 using Tapatalk 2
well,it maybe suits well for you..
however, i am on cmb4, and battery here is just so good..
how bout rocking upgrade your W?
-salute!
Sent from my GT-I8150 using xda app-developers app
Any custom kernel should be compatible with any custom rom, as long as the Android version is correct.
Ya..
Sent from my GT-I8150 using xda premium
And guys, what if we get bootloop/brick our hh bcause flashing a kernel?. How do we recover again?. Does it just re-flash the cusrom?.
Sent from my GT-I8150 using Tapatalk 2
Nanomite21 said:
And guys, what if we get bootloop/brick our hh bcause flashing a kernel?. How do we recover again?. Does it just re-flash the cusrom?.
Sent from my GT-I8150 using Tapatalk 2
Click to expand...
Click to collapse
Yup, or a stock, whatever you prefer flashing. To prevent bootloop/brick make sure you flash a kernel that supports your android version and read the rom's posts to see if it works completely with the kernel. Had a problem with the JB kernel and our JB MIUI, home kept foceclosing and such, but coliv_aja fixed it and posted a compatible version for the rom.
I use CM9 custom rom on my Galaxy Gio is it ICS but I wanna try out the Jelly Bean so I tried some version of new CM 10.1 but it crash because of keyboard did not work.
IMPORTANT
I use cwm recovery
l'm sorry if my english was bad and if there is solution for my broblem I only didin't found it
Sent from my GT-S5660 using xda app-developers app
Before installing any CM rom,you need to wipe data/factory reset first and then flash the rom
I know that but thanks
Sent from my GT-S5660 using xda app-developers app
CM 10.1 by Erickas or by OldDroid.
bogdanwp said:
CM 10.1 by Erickas or by OldDroid.
Click to expand...
Click to collapse
which one is your prefer?
Both are very good , just try them both and see if you prefer one of them
cm10.1 OldDroid in my opinion is the best one very stable and fast is my every day rom, no big problems.
Now I use CM10.1 By Old droid is it
Mega good
Sent from my GT-S5660 using xda app-developers app
user 6230 said:
I use CM9 custom rom on my Galaxy Gio is it ICS but I wanna try out the Jelly Bean so I tried some version of new CM 10.1 but it crash because of keyboard did not work.
IMPORTANT
I use cwm recovery
l'm sorry if my english was bad and if there is solution for my broblem I only didin't found it
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
The most stable JB build is CM10.1 from Erikcas. I suggest to use it.
Hi!!
I just wanted to ask if I have to be first root on my note II in order to install CyanogenMod, that's right?
can I install CyanogenMod rom on my note II without being root?
Cheers.
J.
Yes you need root and a custom recovery
Sent from my GT-N7100 using Tapatalk 2
Check out www.galaxynote2root.com for all the info you need on rooting, flashing and recovery programs I have heard this rom can be a little unstable but have not yet tried it. I use WanamLite rom and love it, very close to stock with more benefits and very stable
Sent from my GT-N7105 using Tapatalk 2
Read the CM10.1 nightly thread, it has instructions.
Hi,
Just wanted to ask if cyanogenmod is stable enough for my Note II. I am looking for a stable rom... the closest one to the stock because I would not like to get a stone as phone...
Is WanamLite working properly?
Regards and thanks!
I tested both roms for same time, both very stable. However my opnion is that if you want a rom very similar to stock what is the fun? Nothing new to play around.
I'm using now Moon v8, a lot of features, good battery and no issue so far.
Sent from my GT-N7100 using xda app-developers app
Well, sure - I'll have fun installing a rom and all that stuff but I had an iphone and I got tired saving everything before jailbreaking and then install everything.. when a new version was released the cycle again... so I'd like to have a phone with cyanogenmod o whatever mod rom but I don't want to change rom every time... at least I don't want to save my pictures and do a list of apps to download after installing a new rom because last one was unstable.... you know what I mean? I hate Samsung stock.. but works fine.. I think...
Thanks.
Sent from my GT-N7100 using xda app-developers app