Develop Bugs

[Q] 4.0.1 to 4.0.4? Engineering model

Hello,
I am new to the Galaxy Nexus and 4.0. I traded for a Nexus and it appears to be a unlocked engineering model currently running 4.0.1
I flashed the newest version of clockwork recovery on and see that the new 4.0.4 for GSM was released today. I am reading a lot of back and forth regarding the compatibility of the release so I figured I would check here before I dig in.
Am I able to simply put the 4.0.4 GSM release on my SD and wipe/flash using Clockwork install from zip? or is there something I am missing.
I don't care about losing all my data. I would appreciate any help guys!
Model Number: Galaxy Nexus (ENGINEERING)
Android Version: 4.0.1
Baseband version: I9250UGKKA
Kernel version: 3.0.1-ga052f63
[email protected] #1
Build number: ITL41F.I9250UGKKA

the 4.0.4 OTA is a upgrade from 4.0.2. you need 4.0.2 as a prequisite and its for "yakju" devices, verify if your device is 'yakju' it says Galaxy Nexus but 'yakjuxw' has Galaxy Nexus.
https://play.google.com/store/apps/...SwxLDEsImRlLmNicnVlZ2cub2ZmaWNpYWx1cGRhdGUiXQ.. use that to check.

thanks for the quick reply. Where do I find if this is YAKJU or not, bootloader?

jrcannon said:
thanks for the quick reply. Where do I find if this is YAKJU or not, bootloader?
Click to expand...
Click to collapse
.....learn to read

jrcannon said:
thanks for the quick reply. Where do I find if this is YAKJU or not, bootloader?
Click to expand...
Click to collapse
re-read my post.. i included a link to a app that tells you how to find out.
edit: lol you insulted yourself

Looks like I am on yakjuux. Am I able to move to jakju 4.0.2 and then update to 4.0.4?
Sorry for the back and forth I just need to get the various version straight before I start going crazy flashing

jrcannon said:
Hello,
I am new to the Galaxy Nexus and 4.0. I traded for a Nexus and it appears to be a unlocked engineering model currently running 4.0.1
I flashed the newest version of clockwork recovery on and see that the new 4.0.4 for GSM was released today. I am reading a lot of back and forth regarding the compatibility of the release so I figured I would check here before I dig in.
Am I able to simply put the 4.0.4 GSM release on my SD and wipe/flash using Clockwork install from zip? or is there something I am missing.
I don't care about losing all my data. I would appreciate any help guys!
Model Number: Galaxy Nexus (ENGINEERING)
Android Version: 4.0.1
Baseband version: I9250UGKKA
Kernel version: 3.0.1-ga052f63
[email protected] #1
Build number: ITL41F.I9250UGKKA
Click to expand...
Click to collapse
Would you mind doing a couple of things before you flash anything please?
1) Could you check the version of your bootloader? Reboot into the bootloader and read it from there. If you have an engineering version, I'd REALLY appreciate a dump before you flash anything over it.
2) Could you dump your radio? If you don't know how to do it, I can guide you through it. You need root.
We haven't been able to get ahold of any engineering bootloaders/radios yet, and it seems you lucked out.
It would be very much appreciated!!! Thanks.

Any news? Can you dump your radio and bootloader for us?

Bump...
10 char

AOKP I9250xxkk6 !!!!!!

I am using AOKP Milestone5 Rom with baseband version i9250xxLA2
I got data drop problem ! someone say baseband i9250xxkk6 will fixed the data drop problem !
where can I get the baseband i9250xxkk6 and install it on my phone.
I am getting the AOKP Milestone5 rom from http://forum.aokp.co/page/releases/_/milestone-5-r20
I can not find the xxkk6 on AOKP releases page !!!!

http://forum.xda-developers.com/showthread.php?t=1405345
or
http://rootzwiki.com/topic/24824-radio-gsm-galaxy-nexus-i9250-baseband-dumps-collection-discussion/
Note: Obviously, these are for GSM phones.

I! D! K!
Try posting in the Q&A forums ! !
Lol sorry liked the use of your exclamation points.

hki_peter said:
I am using AOKP Milestone5 Rom with baseband version i9250xxLA2
I got data drop problem ! someone say baseband i9250xxkk6 will fixed the data drop problem !
where can I get the baseband i9250xxkk6 and install it on my phone.
I am getting the AOKP Milestone5 rom from http://forum.aokp.co/page/releases/_/milestone-5-r20
I can not find the xxkk6 on AOKP releases page !!!!
Click to expand...
Click to collapse
That's a ROM project page, so there won't be any RADIO's there...
If I were you, I'd try the corresponding GNex development subforum and their RADIO stickies, like this one.
But if you're on XXLA02, keep in mind that it's the latest official GNex radio image
and do a search, don't aggravate mods

JosepiOT said:
http://forum.xda-developers.com/showthread.php?t=1405345
or
http://rootzwiki.com/topic/24824-radio-gsm-galaxy-nexus-i9250-baseband-dumps-collection-discussion/
Note: Obviously, these are for GSM phones.
Click to expand...
Click to collapse
after downlaod cwm-radio-i9250-xxkk6.zip, it is just copy to GN and install with cwm --> select install zip file, do I need wipe clean after compiled install ?
XXKK6
- Standard European baseband
- Originally from the yakju ICL53F factory image and the OTA update (ICL53F from ITL41F)
ICL53F is for CDMA/LTE, but I am using GSM version !!!!!!! where can I get the XXKK6 for GSM version

There's a bug in the AOKP M5 kernel which causes data drops. Flash Franco M3 for a temporary fix.

android baseband file don't have CDMA and GSM version ! so doesn't matter which phone are you install with ?

[Q] WTF? confused about buildnumber?

so i just got my gnex yesterday and i would like to root unlock and flash cwm and so on... i bought it from finland sim free on regular store. but now toolkit v7.2 says choose build i have android 4.0.4 IMM76K? cant find it on on regular gsm list (wich i think this is the gsm model) but on verizon lte list there is 4.0.4 IMM76k? how shouldi root my phone flash cm etc

Don't use a toolkit. Do it manually in fast boot.
Imm76k is a non-yakju/takju build.
Sent from my Galaxy Nexus using xda premium

I live in Finland so i bought galaxy nexus from Finland!
In Finland Galaxy Nexus is GSM "YAKJUXW" 4.0.1 with XXKK1 baseband and it updates it to 4.0.2 baseband radio is then XXKK6 and then to 4.0.4 IMM76I or what it was (ofc. still yakjuxw build but only newer)..
also I don't use toolkit to unlock bootloader or to root my Galaxy Nexus, I use fastboot which is better to understand sometimes.....
Edit: 4.0.4 IMM76K is for Yakjuxw, not IMM76I..

manumanfred said:
I live in Finland so i bought galaxy nexus from Finland!
In Finland Galaxy Nexus is GSM "YAKJUXW" 4.0.1 with XXKK1 baseband and it updates it to 4.0.2 baseband radio is then XXKK6 and then to 4.0.4 IMM76I or what it was (ofc. still yakjuxw build but only newer)..
also I don't use toolkit to unlock bootloader or to root my Galaxy Nexus, I use fastboot which is better to understand sometimes.....
Click to expand...
Click to collapse
There was no IMM76I update for yakjuxw. It was IMM76K, like almost all of the other non-yakju/non-takju builds.

efrant said:
There was no IMM76I update for yakjuxw. It was IMM76K, like almost all of the other non-yakju/non-takju builds.
Click to expand...
Click to collapse
OK!

[Q] best baseband for WIND galaxy nexus jelly bean

Hi
Upgraded to Jelly Bean 4.1.2 using Wugfresh's excellent Toolkit.
Stock baseband that came with the Wind GNex was Android 4.1.1 running UGLH1. After upgrading to 4.1.2 Stock Yakju build, the baseband changes to XXFL1 - which i assume is the same version as ICS.
So far seems reception is fine. Mostly in Toronto North York area I receive 3 bars signal and switching frequently between 3g/HSPA+.
Wondering from fellow Canadian WIND / AWS users if they have experienced any issues using XXFL1 radio baseband on Jelly bean 4.1 or what the best radio to flash is ?
cheers
Mike

Read through this, see what works for others on your carrier in your location. You will get many answers. You will have to test them all to find which one is BEST for YOU. No one else can answer that but you.
http://forum.xda-developers.com/showthread.php?t=1405345

[Q] I got a "Galaxy SII" from Boost Mobile USA, is... this that device?

so, I got a phone (model number sph-d710bst) from the Boost Mobile USA carrier. It's marketed simply as the "Samsung Galaxy S II on Boost", but apparently this phone goes by many names (Samsung Galaxy SII, Sprint Epic 4G Touch, Samsung Epic 4G Touch, Epic 4g, etc...). Basically, it runs on the Sprint 4G (not LTE) network because Boost is owned by Sprint, and it calls itself sph-d710bst.
Long story short, the stock rom on this thing sucks. The UI is atrocious, it has some USB connectivity issues, and it won't let me permanently suppress it's constant demand to be OTA updated (I can't accept because it will probably remove my ability to root).
So, I wanted to get cyanogenmod, or another good rom that has root, on here. What's the best way to go about it? Does root exist for this device? Is this even the right forum for this device?

yanom said:
so, I got a phone (model number sph-d710bst) from the Boost Mobile USA carrier. It's marketed simply as the "Samsung Galaxy S II on Boost", but apparently this phone goes by many names (Samsung Galaxy SII, Sprint Epic 4G Touch, Samsung Epic 4G Touch, Epic 4g, etc...). Basically, it runs on the Sprint 4G (not LTE) network because Boost is owned by Sprint, and it calls itself sph-d710bst.
Long story short, the stock rom on this thing sucks. The UI is atrocious, it has some USB connectivity issues, and it won't let me permanently suppress it's constant demand to be OTA updated (I can't accept because it will probably remove my ability to root).
So, I wanted to get cyanogenmod, or another good rom that has root, on here. What's the best way to go about it? Does root exist for this device? Is this even the right forum for this device?
Click to expand...
Click to collapse
yep it is the same device . there is plenty of ROMs and info here so look around and enjoy you will find all you need throughout the forums

yanom said:
so, I got a phone (model number sph-d710bst) from the Boost Mobile USA carrier. It's marketed simply as the "Samsung Galaxy S II on Boost", but apparently this phone goes by many names (Samsung Galaxy SII, Sprint Epic 4G Touch, Samsung Epic 4G Touch, Epic 4g, etc...). Basically, it runs on the Sprint 4G (not LTE) network because Boost is owned by Sprint, and it calls itself sph-d710bst.
Long story short, the stock rom on this thing sucks. The UI is atrocious, it has some USB connectivity issues, and it won't let me permanently suppress it's constant demand to be OTA updated (I can't accept because it will probably remove my ability to root).
So, I wanted to get cyanogenmod, or another good rom that has root, on here. What's the best way to go about it? Does root exist for this device? Is this even the right forum for this device?
Click to expand...
Click to collapse
you can root using cf-auto root on all stock roms, with the possible exception of FL24. In that scenario, you just Odin an older prerooted rom. In short, there is no reason to deny the OTA.
What firmware are you currently on?

Please read forum rules before posting
Questions and Help go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator

Adreaver said:
In short, there is no reason to deny the OTA.
What firmware are you currently on?
Click to expand...
Click to collapse
oh, so the OTA doesn't remove the root exploits? that's good.
As for the firmware version, I'm not sure. I haven't rooted or otherwise modified this device yet, I just got it from the Boost Mobile store. (Boost is owned by Sprint and is a no-contract way to get Sprint service). Under "about phone" in settings, I have this data:
Code:
Model number: SPH-D710BST
Android Version: 4.0.4
Baseband version: S:D710.10 S.FI22
Kernel version: 3.0.15-981989
[email protected] #3
SMP PREEMPT Sat Sep 22 18:11:57 KST 2012
Build number: IMM761.FI22
Hardware version: D710.10

I used Exynosabuse to root my device: http://www.xda-developers.com/andro...ecurity-hole-demoed-and-plugged-by-chainfire/
Worked like a charm

I have the version from Virgin Mobile and installed a TW JB rom (jellyverse). I can't get MMS working on it though. I switched APN settings through ##data# and still nothing is working. Does anyone know the solution for this?

notebooko said:
I have the version from Virgin Mobile and installed a TW JB rom (jellyverse). I can't get MMS working on it though. I switched APN settings through ##data# and still nothing is working. Does anyone know the solution for this?
Click to expand...
Click to collapse
You need a jb modem on twiz jb roms and ics or gb on ics twiz or jb aosp or data doesn't work right
I like to break stuff!

-EViL-KoNCEPTz- said:
You need a jb modem on twiz jb roms and ics or gb on ics twiz or jb aosp or data doesn't work right
I like to break stuff!
Click to expand...
Click to collapse
I have a jb modem and data and everything is working perfectly. Only problem I'm having is mms which doesn't seem to work even after editing the APN settings in ##data#.

Dypraxxx said:
I used Exynosabuse to root my device: http://www.xda-developers.com/andro...ecurity-hole-demoed-and-plugged-by-chainfire/
Worked like a charm
Click to expand...
Click to collapse
does exynosabuse also unlock the bootloader so I can put cyanogenmod (or similar) on my device? The stock rom on this thing sucks.
oh, and looking aroudn the forum, it looks like this device is easy to brick. What should I not do?

yanom said:
oh, so the OTA doesn't remove the root exploits? that's good.
As for the firmware version, I'm not sure. I haven't rooted or otherwise modified this device yet, I just got it from the Boost Mobile store. (Boost is owned by Sprint and is a no-contract way to get Sprint service). Under "about phone" in settings, I have this data:
Code:
Model number: SPH-D710BST
Android Version: 4.0.4
Baseband version: S:D710.10 S.FI22
Kernel version: 3.0.15-981989
[email protected] #3
SMP PREEMPT Sat Sep 22 18:11:57 KST 2012
Build number: IMM761.FI22
Hardware version: D710.10
Click to expand...
Click to collapse
The OTA will remove the root exploit. I am saying that rerooting is super easy with cf-auto root and you shouldn't deny the OTA based on wanting to root.
You should take the ota and then root using traditional methods.
Sent from my SPH-D710 using xda app-developers app