[Q] HTC Wildfire TOUHC panel - FAIL - HTC Wildfire S

Hey my HTC Wildfire screen stopped working whan i went to boot menu i saw that there writes "TOUCH PANEL - fail". I know that its possible to fix it via flashing a new rom, but how can i do this without clockwork mod ? My phone have only stock adroid recovery.. also debugging is standart type i dk on or off. So please help to reslove this problem.
Maybe this goude can fix my phone http://forum.xda-developers.com/showthread.php?t=1162971 ?
Thanks for posting and helping.

If it says that in the recovery boot menu it may well be faulty.
You could try making a gold card then flash an official ruu.

pls give me a link how to make everything i am a huge noob in telephone software..

http://forum.xda-developers.com/showthread.php?t=1074445
[ROM]Shipped Marvel ROM Collection
Check the above link to get the rom you need.
Then Google easy goldcard creator

Or your under warranty it might be better for you to send for repair.

That happens to my old Wildfire S. Both the screen and home buttons went and I couldn't do anything. I returned it as I only had it for 3 weeks and they gave me a new one, No issues with it since. I have read around the net that people have had the same issues with the phone and it's just faulty. I have had my new one for 4 months and it hasn't had an issue...

Yeah my first one had a problem with the touch screen. When charging and using the touch screen it would do some crazy stuff like moving all my icons, scrolling pages etc.
Only had it a day then called my provider who sent a new one.
Had this one about 7 months and its perfect.
My son has one and it has a bad power button, have to press it 3 to 4 times to wake the phone. Seems to be common to the sensation.

I will not change my telephone, becouse i can't.. any more ideas how can i flash a new rom ?

choisYA said:
I will not change my telephone, becouse i can't.. any more ideas how can i flash a new rom ?
Click to expand...
Click to collapse
Check the link above and Google "goldcard"

I dont know what is wrong but when i connect my phone to computer the mircro sd card folder in My Computer doesn't appear... Also i have installed htc sync and got same problem in program writes that no connected any ideas ?

choisYA said:
I dont know what is wrong but when i connect my phone to computer the mircro sd card folder in My Computer doesn't appear... Also i have installed htc sync and got same problem in program writes that no connected any ideas ?
Click to expand...
Click to collapse
Go to your phones settings
Then look for 'connect to PC'
Then tick the box that says ask me or change default connection type.
Alternative is when connected to PC drag the notification bar down and you'll see USB connection, click it and choose required connection.
If it helped hit the thanks button.

why dont you read the all theme ? I can't unlock my phone i can't do anything just go to boot menu i turn it is everything good but it doesn't unlock becouse my touch panel is fail.

then basically your [email protected]@@ed SEND IT BACK

Just a thought but in the hboot menu have your tried "Clear Storage" ?

Tera Tike said:
Just a thought but in the hboot menu have your tried "Clear Storage" ?
Click to expand...
Click to collapse
yes ofc. Hmm tomorrow i will try to make a gold card, please give me any more solutions, thanks.

Related

htc s620 stuck at startup

Hi,
My S620 is stuck at the startup screen showing just the htc logo and won't go any further. Anyone know how I can fix this?
Try to remove the battery, the SIM card and the memory card. Just insert the battery and try again. This worked for me.
It does not work:-( Anyone know how to put directly into bootloader mode?
Or anyone has any other tip?
bump anyone have an idea why mine stopps at the htc screen at start up?
Hard reset?
Did you tried hard-reset? You need at least one previous sync sesion, or you will loose everything stored on the device.
I tried that. Not working;-(
It does not react at keyboard pressure at all;-(
surfer said:
Hi,
My S620 is stuck at the startup screen showing just the htc logo and won't go any further. Anyone know how I can fix this?
Click to expand...
Click to collapse
which rom did you use and have you unlocked it with Imeicheck ?
jhwo99 said:
which rom did you use and have you unlocked it with Imeicheck ?
Click to expand...
Click to collapse
The WM6 rom and it was unlocked through imeicheck. Any ideas?
surfer said:
The WM6 rom and it was unlocked through imeicheck. Any ideas?
Click to expand...
Click to collapse
I had a similar problem and Imeicheck helped me out.
"Plan B" worked for me.
I hope this will help you.
A) flashing ANY new ROM as CROSS-MODEL-ID update
B) Fix the "Data crashes"
In case you have problems please indicate the step letter/number which is not clear / not working for you.
Just do EVERYTHING EXCAT STEP BY STEP and everything will work.
---------
A)
Please do it EXACT step by step like described now and it will work (it is ESSENTIAL that you do it EXACT STEP BY STEP)
0) turn off antivirus/firewall/everything else running in background
1) start phone in windows, connect active sync (green circle in system tray of your pc)
2) start the unlocker (phone screen will turn white, active sync will disconnect, THIS IS NORMAL)
3) when asked for KEY-FILE or COMM ERROR#1 comes up WAIT 2 MINUTES (DON'T TOUCH ANYTHING)
4) DO NOT TOUCH PHONE AT ALL for ALL the next steps!!!
5) remove USB cable
6) close the unlocker on PC
7) reconnect USB cable
8) unpack the "RUU_Excalibur_TMO_US_1.20.531.1_4.1.13.34_02.79.90_Test.exe"
(right click on the .exe and select "Winzip->Unzip to folder..."
9) in the extracted folder you will find a file called like "RUU_signed.nbh" (.NBH), open it with HEX EDITOR (e.g. HexWorkshop) and locate the string like "EXCA20000" near the beginning of the file. Change it to "EXCA****" (all without the quotes, overwrite the DIGITS with STARS)
10) in the extracted folder you will find a file called like "RUU_Update.exe", open it with HEX EDITOR and SEARCH the string "BsaD5SeoA" and OVERWRITE it with "IMEICHECK" (all without the quotes)
11) start the just edited RUU_Update.exe now and make the ROM update (screen of phone will stay white ALL THE TIME, THIS IS NORMAL)
12) wait till update is complete and phone will start with the new ROM
13) To fix the "Data Crashes" problem just make a COMPLETE run of the unlocker (see B) ) and you are done.
---------
B) To fix the "Data crashes" you only have to make a COMPLETE run of the unlocker.
Please do it EXACT step by step like described now and it will work (it is ESSENTIAL that you do it EXACT STEP BY STEP)
0) turn off antivirus/firewall/everything else running in background
1) start phone in windows, connect active sync (green circle in system tray of your pc)
2) start the unlocker (phone screen will turn white, active sync will disconnect, THIS IS NORMAL)
3) when you get COMM ERROR #1 WAIT 2 MINUTES (DON'T TOUCH ANYTHING)
4) DO NOT TOUCH PHONE AT ALL for ALL the next steps!!!
5) remove USB cable
6) close the unlocker on PC
7) reconnect USB cable
8) start unlocker again and now it will complete the unlock
9) at next start the "Data Crashes" will be away.
surfer said:
The WM6 rom and it was unlocked through imeicheck. Any ideas?
Click to expand...
Click to collapse
Is your problem solved ?
jhwo99 said:
Is your problem solved ?
Click to expand...
Click to collapse
I can acess the bootloader now. So all i've to do is to find an official WM5 rom to try and flash back again. Any ideas?
surfer said:
I can acess the bootloader now. So all i've to do is to find an official WM5 rom to try and flash back again. Any ideas?
Click to expand...
Click to collapse
You van find the WM5 rom in this forum, but i suggest to install the Russian HTC rom. This works great (for me).
I work with all the options in the telephone, the whole day. Without any problems !
s 621 stuck on wm6
hello
Need Help pls! my new htc dash has stucked on the wm6 logo, active sync does not recognize the phone . it happened after ive installed on phone language extender
could any1 help pls...?
thnks
Ok this is what you do, hold down the camera button located to the right of the space bar for like 10 seconds, then while still holding it own plug the USB in and you should see the menu come up with three colors. This is where you load your original ROM and if its T Mobile you can get the rom from the website.
s 621 stuck on wm6
thank you very much for ur reply. i got the 3 color on screen. pls advise meaning of "flash..." pls note im not a t mobile member
thank u so much for helping
Oh ok I can get that rom for you, well flash means to install. Let me ask you one quick thing is your phone tmobile branded. Like does it have the tmobile logo on it or not.
s 621 stuck on wm6
nop
the phone aint branded
i actually got wm6 and when i try to install it the black window says there s no device connected..
Um... Well use this file to reflash it okay. Make sure that the tri-colored screen is on when you try to install the rom (reflash means install ok)
http://rapidshare.com/files/7886560...S_1.33.422.1_4.1.13.51_03.07.90_Ship.exe.html

Original English WM 6.0 ROM for M88 MiPhone available for download!

English OS System 20080801 Edition (ROM image) for M88 MiPhone
Please download from here
If somebody knows how to enter the bootloader mode of this phone please share here with us!
Here is the instruction for this procedure from the supplier which is nor working for me:
"English OS System 20080801 Edition (ROM image) available for download
- To update ROM, format your TF card with FAT32 and unzip all files and folders from the downloaded file into the root folder of the TF card. Then, restart the phone to begin updating. This update converts all non-English versions of this phone into English version."
If somebody can manage to install the ROM please write here the steps!
Thanks!
You can get to the flash update by pressing RESET, MENU, and POWER all at the same time, then release RESET first and wait for a message. The message will tell you to release POWER to do a hard-reset or MENU to do a flash update. In this case, you will release MENU first, then you will get a message asking if you want to update from SD. At this point, none of the buttons do anything so I assume you have to tap the touchscreen. My touchscreen is broken so I couldn't get any further than this.
Problem Fixed!
GnatGoSplat said:
You can get to the flash update by pressing RESET, MENU, and POWER all at the same time, then release RESET first and wait for a message. The message will tell you to release POWER to do a hard-reset or MENU to do a flash update. In this case, you will release MENU first, then you will get a message asking if you want to update from SD. At this point, none of the buttons do anything so I assume you have to tap the touchscreen. My touchscreen is broken so I couldn't get any further than this.
Click to expand...
Click to collapse
Thanks for your help, m8. It didn't work that way for me. I was adwised to do this:
1. Duplicate the update.img file and rename the second one as "uploader"
2. Copy both "update.img" and "uploader" on the SD - formatted in FAT32
3. Press POWER and HOME butons at the same time.
4. There are two possible options from here:
a) White screen with blue text showing "Upload image... please wait..."
b) Red screen with the options what to do in the next step -
5. I saw first the a) option - the white screen. So after 3 minutes of waiting the phone said it is done and it will selfrestart. After the restart - voila! There was the English OS loaded on my phone and everything was working perfect!
Hope this to help to other people too!
Wow! It was very detailed and finally i resolved my problem. Thanks!
Does somebody knows how can i uninstall the fung S2U2? It causes a lot of problems with the horizontal screen ant others. It's not in the list of "remove programs".
Check this out:
ZEMONTI said:
Wow! It was very detailed and finally i resolved my problem. Thanks!
Does somebody knows how can i uninstall the fung S2U2? It causes a lot of problems with the horizontal screen ant others. It's not in the list of "remove programs".
Click to expand...
Click to collapse
Check this out:
Resco explorer
Pocket Mechanic
Pocket Toolman
Resco is very useful thing so the other two are very powerful as well. You will definetely uninstall S2U2 with more than one of them.
Good luck!
Hi, is it existing a French release of this rom for M88 or can you help me for translate it ? Cordialy
Sorry for my english very bad...
MMS works in this rom?
MMS works only with Arcsoft_MMS_Composer_v5.0.31.16
bye
Mark
i have aquestion... : I was screwing around with the m88 phone and put in the original rom in (I've done this many times) but this time i forgot to use the other three files .img and ... i only had the update.img in the card... then when i tried flahing it , it was reading but the battery fell out and now it wont turn on.... any ideas on how i can fix this... ???? I really need the help please!!! If it is possible to fix this.
helppp
I need help i was updating mi os , but it takes more than a half of hour , and now it wont turn on again how can i fix that? thanks?!
problems
i have a daxian +999
i flash it whit that file it work but now i have a white screen the phone looks like ok but nothing shows in the screen only a white screen what i can do ??
My touchscreen does work but I get the white screen asking me "updated from SD card?" then it just sits there. I dont have a keyboard to hit Y. None of the buttons do anything. Touching the screen does nothing.
*edit* figured it out. You just keep holding the power button down. Then it flashed to a solid purple screen. I went wtf.... it screwed up again? then after a few minutes it booted up.
problems in m89
hello, I recently bought a M89.
In general the phone is great, but mine has a very big problem.
As a PDA it works great, but when I insert my SIM card the phone just freezes. It works for just a minute after the SIM is inserted. I've even been able to make one or two calls before it freezes.
But past one or two minutes it just stops working. It doesn't respond to anything at all, the only solution is to remove the battery.
I think the problem is in the firmware. I've reinstalled a bunch of diferent firmwares: wm6 english, wm6.1 spanish, wm6 english again... and nothing works.
can anyone help me???, 'cause this is really killing me :'(
Thanks in advance!
oic0 said:
My touchscreen does work but I get the white screen asking me "updated from SD card?" then it just sits there. I dont have a keyboard to hit Y. None of the buttons do anything. Touching the screen does nothing.
*edit* figured it out. You just keep holding the power button down. Then it flashed to a solid purple screen. I went wtf.... it screwed up again? then after a few minutes it booted up.
Click to expand...
Click to collapse
Just wondering - What is the size of your microSD card.
As far as I know m88 does not support SD card greater that 4 Gb by default.
Please, let us know.
Updated from SD Card ?
Hello, first of all I want to say thank you because I learned a lot from this thread. I bought M88 phone some months ago and is the first time I cannot use ( I really don't know what went wrong but finally the phone is not working or frezze ).
I bought 2Gb card and was formatted in FAT32. I also complete all steps in order to load the original image but I got this message: "updated from SD card?" and nothing more... What button must be pressed ?
I'll go crazy... do you know what's the next step ?
Thank you very much.
i dont understand sorry. i have to copy the "update" imgfile and rename it as "uploader"... and leave this two files : "update and uploader" in the root folder ?
I've install ROM from this topic: http://forum.xda-developers.com/showthread.php?t=452848
and now, when I try power on my MiPhone - it show only white screen - please help!
bootloading
the file, atleast on windows 7, shows up as "update". Also, I found it works must faster and easier to make 3 copies (4 files total)
naming 1: update.img
2: uploader.img
3: Update
and 4: uploader
(so the last 2 don't actual have .img in the title)
Then just make sure you hold down both the buttons, and vuo-la! haha
Doesn't fix the MMS problem though.
Does anyone know how to make it so that it can use mms?
Miphon m88
Danke es funktioniert supper !!
i got white screen too ;[ how to fix my phone now ;/ i dont see enythink ;[

"enable advanced network fuctionality"

howdy, using a diamond with stock 1.93.479.3 WWE rom and am trying to install Olinex SPL and then a new rom, the problem is that I get [Error 202] when I try to install (using ROMUpdate Utility)... I read that to solve this issue I have to tick 'enable advanced network functionality', but as soon as I do, the activesync connection drops.
Anyways to work around this.. do I have to have 'enable advanced network functionality' ticked for the installation to work?
Cheers.
EDIT: forgot to mention I have windows mobile 6.1, and am using XP with service pack 3.
zdave said:
howdy, using a diamond with stock 1.93.479.3 WWE rom and am trying to install Olinex SPL and then a new rom, the problem is that I get [Error 202] when I try to install (using ROMUpdate Utility)... I read that to solve this issue I have to tick 'enable advanced network functionality', but as soon as I do, the activesync connection drops.
Anyways to work around this.. do I have to have 'enable advanced network functionality' ticked for the installation to work?
Cheers.
EDIT: forgot to mention I have windows mobile 6.1, and am using XP with service pack 3.
Click to expand...
Click to collapse
hi from what I can recall the activesnyc should drop, and the device into a multi couloured screen (bootloader) and then reconnect and the process begins
so what steps should I take exactly? enable advanced network functionality, then put it in bootloader and then sync it once more?
bump...nein?
bump..no one experienced the same?
zdave said:
bump..no one experienced the same?
Click to expand...
Click to collapse
Hello, Zdave!
Maybe I can help you to get into the boot screen multicolor ...
First, connect your phone to USB cable (be sure that the battery is over 50% energy), then using your stylus, reset the device, press and hold volume down key until the screen appears multicolored, should to show your type of connection, in seconds, "USB". Now go to where you installed the program and resume the installation ... I hope I was helpful ...
from my knoledge, the advanced network .... works on some computers (hardware) and doesn't on others.
You should try to enable this option, and use another pc.
hope this helps.
kokocf said:
Hello, Zdave!
Maybe I can help you to get into the boot screen multicolor ...
First, connect your phone to USB cable (be sure that the battery is over 50% energy), then using your stylus, reset the device, press and hold volume down key until the screen appears multicolored, should to show your type of connection, in seconds, "USB". Now go to where you installed the program and resume the installation ... I hope I was helpful ...
Click to expand...
Click to collapse
Activated bootloader, and hit the installation... but same thing, it wouldn't install. The screen, however, changed to a greyscale tint with a percentage... which is good, but It was still stuck at 0%..no movement on the PC as well (stuck at 0%).. then it goes to some recovery mode, which I skip because the phone starts normally (doesn't revert to the tricolour screen).
maybe there's a timed way to activate bootloader during the installation process? I've read most guides but maybe i'm missing something.. or my diamond/PC is messed?
zdave said:
Activated bootloader, and hit the installation... but same thing, it wouldn't install. The screen, however, changed to a greyscale tint with a percentage... which is good, but It was still stuck at 0%..no movement on the PC as well (stuck at 0%).. then it goes to some recovery mode, which I skip because the phone starts normally (doesn't revert to the tricolour screen).
maybe there's a timed way to activate bootloader during the installation process? I've read most guides but maybe i'm missing something.. or my diamond/PC is messed?
Click to expand...
Click to collapse
I do not know how I could help you , but bootloader immediately cancel the installation, where what you want to install is not intended for your device type, eg if for CDMA, or if for other model in addition to Diamond, I just happened when I wanted to put in mine, an operating system for Touch Pro... ,check again, if what you want to install is for your device.
God speed!
zdave said:
Activated bootloader, and hit the installation... but same thing, it wouldn't install. The screen, however, changed to a greyscale tint with a percentage... which is good, but It was still stuck at 0%..no movement on the PC as well (stuck at 0%).. then it goes to some recovery mode, which I skip because the phone starts normally (doesn't revert to the tricolour screen).
maybe there's a timed way to activate bootloader during the installation process? I've read most guides but maybe i'm missing something.. or my diamond/PC is messed?
Click to expand...
Click to collapse
Seems that u have to load a Hard-SPL.
Please Follow the Steps in:
http://forum.xda-developers.com/showthread.php?t=416211
or Use the search function.
Stuck @0% its a know issue without Hard-spl. Has nothing to do with ur a-sync problem...
mastah said:
Seems that u have to load a Hard-SPL.
Please Follow the Steps in:
http://forum.xda-developers.com/showthread.php?t=416211
or Use the search function.
Stuck @0% its a know issue without Hard-spl. Has nothing to do with ur a-sync problem...
Click to expand...
Click to collapse
used the search function thanks, but the whole point is that I'm trying to install the HardSPL (as stated in the original post). The installer mentions my current SPL and the one that is about to be installed (Olinex).
aww sorry, was late and seems taht i didnt read exactly..
tried to turn off Firewall? AV?
I never had probs with the option ticked on. But i think also without.
Have a look on the flashing method of HSPL, if i remind correctly u dont
have to put ur phone in Bootloader mode.
Instead it will load a sspl and reboot ur phone for flash HSPL. Then activesync
will loose connection and the RUU takes over.

HTC desire 2.2 HELP please

Ok so, this is my first android phone and after being prompted to install the 2.2 update on my European htc desire, i downloaded and started it installing. It gets to about 23% and says process system unavailible and after reading what people said i cleared the phone and tried to install the update manually from the SD card. This didn't work
My phone currently does this
Will boot into what it says is 2.2 but with no wifi, no service, and no SD card showing up
then after about 5 minutes it will reboot.
I have no idea what i can do to fix this? could someone please help me, i'm a noob with android so a clear step by step would be much appreciated
anyone
I am having the same issue... Anyone some help please...
I had a symetrical experience.. I can't post links yet, but you if you look at my posts you should be able to find what worked for me.
Futurian said:
I had a symetrical experience.. I can't post links yet, but you if you look at my posts you should be able to find what worked for me.
Click to expand...
Click to collapse
how did you create a blank goldcard, i can't access my SD card on my phone while it's in the phone so how did you do it
Do you have a WIFI connection? I do, and did the OTA 2.2 upgrade over WiFi with no problems, on my Unbranded European HTC Desire.
If youre phone won't boot properly, there are a few answers; 1) Return in to HTC, they're getit working and back to you, 2) Return it to th place of purchase, 3) Root/reflash (but sounds like it might not be an option).
Dale
F3L1X1 said:
how did you create a blank goldcard, i can't access my SD card on my phone while it's in the phone so how did you do it
Click to expand...
Click to collapse
I followed the instuctions in the "[TUT]Complete upgrading guide(root, unroot, flashing ROM & updates)" thread within Desire Android Development. (Post #3)
dedlite said:
Do you have a WIFI connection? I do, and did the OTA 2.2 upgrade over WiFi with no problems, on my Unbranded European HTC Desire.
If youre phone won't boot properly, there are a few answers; 1) Return in to HTC, they're getit working and back to you, 2) Return it to th place of purchase, 3) Root/reflash (but sounds like it might not be an option).
Dale
Click to expand...
Click to collapse
When I got in touch with HTC they wanted £50 to do a reflash, falsely accusing me of rooting my device..
was that 50$ to send it to them? or can they do it without having it there. Because if THEIR update screwed up my phone i don't see why i should have to pay for a fix
maybe a silly question but did you try a factory reset?
http://www.htc.com/www/howto.aspx?id=805&type=1&p_id=312
HugoTouchHD said:
maybe a silly question but did you try a factory reset?
http://www.htc.com/www/howto.aspx?id=805&type=1&p_id=312
Click to expand...
Click to collapse
yeah i did that, about the only advice the australian HTC support guy gave me -____-
F3L1X1 said:
was that 50$ to send it to them? or can they do it without having it there. Because if THEIR update screwed up my phone i don't see why i should have to pay for a fix
Click to expand...
Click to collapse
Tell me about it, so thankful I managed to fix it myself!
It sounds like you are alll applying an OTA update for the standard ROM to what was a branded device. There are lots of explanations as to how to fix this if this is the case
In summary
Download update from mentioned here
Copy this to root of your goldcard and rename to update.zip
Turn off phone
Turn on holding down vol down
Select Bootloader then Recovery (an image of device should appear with exclamation mark over)
In menu (sorry forgot how you get in, if it does not appear then try power+vol down or power + back). From there choose apply update.zip
Wait while update applied
After update select reboot and wait for device to boot
Video of it here
jameson_uk said:
It sounds like you are alll applying an OTA update for the standard ROM to what was a branded device. There are lots of explanations as to how to fix this if this is the case
In summary
Download update from mentioned here
Copy this to root of your goldcard and rename to update.zip
Turn off phone
Turn on holding down vol down
Select Bootloader then Recovery (an image of device should appear with exclamation mark over)
In menu (sorry forgot how you get in, if it does not appear then try power+vol down or power + back). From there choose apply update.zip
Wait while update applied
After update select reboot and wait for device to boot
Video of it here
Click to expand...
Click to collapse
I've just tried this again, installation looked like it went through ok, rebooted and relaoded into sense, then it shows me a status bar counting, normally this gets to about 10% then says ?Sorry process system is not responing, so i can either click wait or force close, then in continues upto about 97% then reboots and reloads only to load a white screen showing htc and continues counting in percentages, gets to about 15% then says force close, then onto about 91% then reboots this goes on for a while until it just shows me a sorta bricked phone with no wifi, gsm or any real functionailty and it continues to reboot every 5 mins, back to where I started showing 2.2 as installed
One strange thing I have noticed is that my CID is
CID: 00000000000000000049E917D100A69E
Reversing CID
CID: 00A600D117E949000000000000000000
Can't find update.zip on SD card during recovery
Tried all this, thanks. Goldcard created using Gold Card Tool 0.0.5 (awesome job Klutsh) . I get the error message:
"E:failed to open /sdcard/update.zip (No such file or directory)" even though it is in the root dir when I look at the card on my PC.
Should it be in a directory called /sdcard ?
chessmaster82 said:
I've just tried this again, installation looked like it went through ok, rebooted and relaoded into sense, then it shows me a status bar counting, normally this gets to about 10% then says ?Sorry process system is not responing, so i can either click wait or force close, then in continues upto about 97% then reboots and reloads only to load a white screen showing htc and continues counting in percentages, gets to about 15% then says force close, then onto about 91% then reboots this goes on for a while until it just shows me a sorta bricked phone with no wifi, gsm or any real functionailty and it continues to reboot every 5 mins, back to where I started showing 2.2 as installed
One strange thing I have noticed is that my CID is
CID: 00000000000000000049E917D100A69E
Reversing CID
CID: 00A600D117E949000000000000000000
Click to expand...
Click to collapse
i get this same problem. How do i create a gold card if when i plug in my phone to my pc it won't recognise it and when i put the SD in the phone the bricked 2.2 won't recognise it
F3L1X1 said:
i get this same problem. How do i create a gold card if when i plug in my phone to my pc it won't recognise it and when i put the SD in the phone the bricked 2.2 won't recognise it
Click to expand...
Click to collapse
I had to format the card in a card reader in my PC, then use the Gold Card Creator mentioned elsewhere in the thread. You have to install HTC Sync because enough drivers are in there to at least allow the apps to 'see' the card at physical level, even if the bricked Android doesn't. Set the phone to USB debug mode in Settings/Applications - the phone stays 'on' long enough between reboots to do that and get a CID out of it! Then Gold Card Creator works well enough to get the CID from the SD.
I'm trying this again with a 2GB card to see if makes any difference.
Check folder settings when using windows
bearMedicine said:
Tried all this, thanks. Goldcard created using Gold Card Tool 0.0.5 (awesome job Klutsh) . I get the error message:
"E:failed to open /sdcard/update.zip (No such file or directory)" even though it is in the root dir when I look at the card on my PC.
Should it be in a directory called /sdcard ?
Click to expand...
Click to collapse
Quick update to this. Make sure you have extensions of known file types SHOWING in your folder settings. I was naming the file update.zip.zip!!
Thanks to ALL in this forum for get apps and assistance. I unbricked my phone tonight thanks to you all
well i phoned the shop here in australia that i bought it from and they said they've had alot of desires being returned because they've been bricked by the update and to just send it back and they'll fix it and update to 2.2 for me

sound?

hi there
i just managed to install android onto a HTC "Kaiser" TyTn2.
everything i need seems to work fine except sound and wifi.
i installed RLS15 from http://forum.xda-developers.com/showthread.php?t=759894
using KaiserCustomRUU.exe
now there seems to be no sound. i called a number, and i hear nothing at all. i tried pressing speaker, and same no sound. vibrates working though. i also tried pulling the vibrate tab but it didnt work. still no sound.
about wifi, i have a Ad-Hoc network from my computer (which i can connect to from my ipod touch 3g - iOS4), but even after turning Wifi on in settings, it just doesnt seem to see my network....
btw i got no "welcome to android" or set up or anything... i did hold the DPad
any help?
I'm not sure but try out another Radio http://forum.xda-developers.com/showthread.php?p=9807696#post9807696 <---- Here
Flash it with HARDSPL or just using CustomRUU when in the tri-color screen.
I could be wrong but that's what I'm guessing
Wi-Fi... Wich kernel did you use?
Try out http://forum.xda-developers.com/showthread.php?p=9807696#post9807696 Post 118
And use the Androidupdate I attached, It's the one from Liquid wich should fix the Wi-Fi
Let us know if it fixed it
(God i had to edit it a million times before i did it right )
calls do definately go out. i called someone, i coudnt hear anything, and they called me back.
What do you mean by "Welcome To Android" ?
i read in some website that the first screen when booting android for the first time is Welcome to Android
Gaura Mohana said:
i read in some website that the first screen when booting android for the first time is Welcome to Android
Click to expand...
Click to collapse
In some builds, when you boot Android, it gives this kind of tutorial on how to use your phone (Wich has as title "Welcome to full android on Kaiser" for example), time and date settings and connect to Google account, It's possible that it isn't in the one you use
Don't worry about it, the welcome to android doesn't show when u press D-pad, the D-pad is to get into the menu when ur kernel is booting (the one with black background and white letters)
The menu is to install your system, make backups, clear dalvik and others
ok... but what do i do now about the sound? (and the wifi if posibble)
Gaura Mohana said:
ok... but what do i do now about the sound? (and the wifi if posibble)
Click to expand...
Click to collapse
Sound=New Radio
Wi-Fi is probably androidupdate
[SOUND]
Go to http://forum.xda-developers.com/showthread.php?t=393182
Scroll down until you see this: KAISER Radios These Radios were ripped from Kaiser WM6.1 ROMs.
Pick a radio and download it.
HARDSPL IS NEEDED FOR THE RADIO!
Extract the file and change the name from the NBH file to KAISIMG.NBH if the name is something else.
Copy KAISIMG.NBH onto the root of your sdcard and plug your sd card into the phone.
Hold down the camera button and turn the device on or reset it.
When you see a tri-colored screen, release the camera button.
When you see a blue text with something like RADIO (i guess) press the power button (just 1 little press, no long pressing)
The device will now update your RADIO, when finished just reset it.
Now reinstall your Android version by holding down the D-center button when asked, then selecting Install System and make it clear data.
[Wi-Fi]
Copy the androidupdate.tgz into your Andboot folder
Reboot the phone and press D-center button when asked
Choose the option to install update
Wait for it to finish and just press quit to boot Android
OMG DUDE!! thank you so much
Gaura Mohana said:
OMG DUDE!! thank you so much
Click to expand...
Click to collapse
no problem
hope it works
i just managed to put the KAIS_RADIO_ONLY_1.71.09.01.nbh (which i renamed to KAISIMG.NBH) and i put it on the root after a couple of hours figuring out how to make the phone show up in explorer
i tried starting exactly as you told me, but it boots directly to android - no tricolor. it worked fine before i installed android. so what do i do now?
Gaura Mohana said:
i just managed to put the KAIS_RADIO_ONLY_1.71.09.01.nbh (which i renamed to KAISIMG.NBH) and i put it on the root after a couple of hours figuring out how to make the phone show up in explorer
i tried starting exactly as you told me, but it boots directly to android - no tricolor. it worked fine before i installed android. so what do i do now?
Click to expand...
Click to collapse
I don't think there's another way, just, turn phone off, hold camera button in while pressing the power button once
Release the camera button after you see the colored screen
http://www.youtube.com/watch?v=bVMeZyuIMls
Doesn't show much more than I already said
Did you put hardspl on it anyways?
Thanks... What i managed to do was to simply get into the tricolors by holding power+home, then i connected to computer, and SPL'ed from CustomRUU. it worked, and sound is working. i tried your way but it woudnt detect my .NBH. thanks anyways
but where can i get a androidupdate.tar for the wifi for?
btw quick point, but my camera seems to work!!!! i remember reading that the camera WONT work on android. (it didnt work before installing the latest radio)
Thanks for the file. i just tried installing the liquid update from this post, and all i get is error under wifi (before wifi would turn on - but it kept on searching and found nothing). i did install a old update before this. could that have messed it up?
i also have a problem with USB mounting. I click turn on USB storage, and it works randomly. it works 1 time - doesnt work 10... replkuggin and stuff doesnt work. as in "Android Phone" is showing in Eject, but nothing is showing in explorer
EDIT
-----------------------
I just re-installed android and now installed the liquid update.
NOW wifi turns on, but it just scans (has been scanning for 5 minutes)
my ipod touch sees the network immediately.
Gaura Mohana said:
Thanks for the file. i just tried installing the liquid update from this post, and all i get is error under wifi (before wifi would turn on - but it kept on searching and found nothing). i did install a old update before this. could that have messed it up?
i also have a problem with USB mounting. I click turn on USB storage, and it works randomly. it works 1 time - doesnt work 10... replkuggin and stuff doesnt work. as in "Android Phone" is showing in Eject, but nothing is showing in explorer
EDIT
-----------------------
I just re-installed android and now installed the liquid update.
NOW wifi turns on, but it just scans (has been scanning for 5 minutes)
my ipod touch sees the network immediately.
Click to expand...
Click to collapse
Hmm can you tell me wich kernel you are using? 2.6.32?
Did you use the guide on Atools to make your nbh files?
Guide: http://forum.xda-developers.com/showthread.php?t=783514
Gotta go take exam right now so I'll be looking for this afterwards.
And since it's 06:24 here in the morning, we have a bit of a time issue I think.
I actually dont know what version i have, but i got it from some post on this forum, and it was the latest, and i did use atools.
I found this post http://www.google.com/support/forum/p/android/thread?tid=3b250c94811ca5df&hl=en
I am trying to use a ad-hoc network too, and i dont have any other type of wifi to try.
thanks
good luck with the exams(s)
EDIT- i have 2.6.32.9
Gaura Mohana said:
I actually dont know what version i have, but i got it from some post on this forum, and it was the latest, and i did use atools.
I found this post http://www.google.com/support/forum/p/android/thread?tid=3b250c94811ca5df&hl=en
I am trying to use a ad-hoc network too, and i dont have any other type of wifi to try.
thanks
good luck with the exams(s)
EDIT- i have 2.6.32.9
Click to expand...
Click to collapse
It could be that it's not possible to connect to an ad-hoc network, I've got no idea about that.
Hope someone else will post here and answer that.
U should really try connecting with a normal Wi-Fi network
Go onto the street and look for appartments or houses with open networks just to test?
i live in a small town..... no one here has internet let alone wifi....
aww that's balls
got no idea on how to try it then

Categories

Resources