Hi,
My S620 is stuck at the startup screen showing just the htc logo and won't go any further. Anyone know how I can fix this?
Try to remove the battery, the SIM card and the memory card. Just insert the battery and try again. This worked for me.
It does not work:-( Anyone know how to put directly into bootloader mode?
Or anyone has any other tip?
bump anyone have an idea why mine stopps at the htc screen at start up?
Hard reset?
Did you tried hard-reset? You need at least one previous sync sesion, or you will loose everything stored on the device.
I tried that. Not working;-(
It does not react at keyboard pressure at all;-(
surfer said:
Hi,
My S620 is stuck at the startup screen showing just the htc logo and won't go any further. Anyone know how I can fix this?
Click to expand...
Click to collapse
which rom did you use and have you unlocked it with Imeicheck ?
jhwo99 said:
which rom did you use and have you unlocked it with Imeicheck ?
Click to expand...
Click to collapse
The WM6 rom and it was unlocked through imeicheck. Any ideas?
surfer said:
The WM6 rom and it was unlocked through imeicheck. Any ideas?
Click to expand...
Click to collapse
I had a similar problem and Imeicheck helped me out.
"Plan B" worked for me.
I hope this will help you.
A) flashing ANY new ROM as CROSS-MODEL-ID update
B) Fix the "Data crashes"
In case you have problems please indicate the step letter/number which is not clear / not working for you.
Just do EVERYTHING EXCAT STEP BY STEP and everything will work.
---------
A)
Please do it EXACT step by step like described now and it will work (it is ESSENTIAL that you do it EXACT STEP BY STEP)
0) turn off antivirus/firewall/everything else running in background
1) start phone in windows, connect active sync (green circle in system tray of your pc)
2) start the unlocker (phone screen will turn white, active sync will disconnect, THIS IS NORMAL)
3) when asked for KEY-FILE or COMM ERROR#1 comes up WAIT 2 MINUTES (DON'T TOUCH ANYTHING)
4) DO NOT TOUCH PHONE AT ALL for ALL the next steps!!!
5) remove USB cable
6) close the unlocker on PC
7) reconnect USB cable
8) unpack the "RUU_Excalibur_TMO_US_1.20.531.1_4.1.13.34_02.79.90_Test.exe"
(right click on the .exe and select "Winzip->Unzip to folder..."
9) in the extracted folder you will find a file called like "RUU_signed.nbh" (.NBH), open it with HEX EDITOR (e.g. HexWorkshop) and locate the string like "EXCA20000" near the beginning of the file. Change it to "EXCA****" (all without the quotes, overwrite the DIGITS with STARS)
10) in the extracted folder you will find a file called like "RUU_Update.exe", open it with HEX EDITOR and SEARCH the string "BsaD5SeoA" and OVERWRITE it with "IMEICHECK" (all without the quotes)
11) start the just edited RUU_Update.exe now and make the ROM update (screen of phone will stay white ALL THE TIME, THIS IS NORMAL)
12) wait till update is complete and phone will start with the new ROM
13) To fix the "Data Crashes" problem just make a COMPLETE run of the unlocker (see B) ) and you are done.
---------
B) To fix the "Data crashes" you only have to make a COMPLETE run of the unlocker.
Please do it EXACT step by step like described now and it will work (it is ESSENTIAL that you do it EXACT STEP BY STEP)
0) turn off antivirus/firewall/everything else running in background
1) start phone in windows, connect active sync (green circle in system tray of your pc)
2) start the unlocker (phone screen will turn white, active sync will disconnect, THIS IS NORMAL)
3) when you get COMM ERROR #1 WAIT 2 MINUTES (DON'T TOUCH ANYTHING)
4) DO NOT TOUCH PHONE AT ALL for ALL the next steps!!!
5) remove USB cable
6) close the unlocker on PC
7) reconnect USB cable
8) start unlocker again and now it will complete the unlock
9) at next start the "Data Crashes" will be away.
surfer said:
The WM6 rom and it was unlocked through imeicheck. Any ideas?
Click to expand...
Click to collapse
Is your problem solved ?
jhwo99 said:
Is your problem solved ?
Click to expand...
Click to collapse
I can acess the bootloader now. So all i've to do is to find an official WM5 rom to try and flash back again. Any ideas?
surfer said:
I can acess the bootloader now. So all i've to do is to find an official WM5 rom to try and flash back again. Any ideas?
Click to expand...
Click to collapse
You van find the WM5 rom in this forum, but i suggest to install the Russian HTC rom. This works great (for me).
I work with all the options in the telephone, the whole day. Without any problems !
s 621 stuck on wm6
hello
Need Help pls! my new htc dash has stucked on the wm6 logo, active sync does not recognize the phone . it happened after ive installed on phone language extender
could any1 help pls...?
thnks
Ok this is what you do, hold down the camera button located to the right of the space bar for like 10 seconds, then while still holding it own plug the USB in and you should see the menu come up with three colors. This is where you load your original ROM and if its T Mobile you can get the rom from the website.
s 621 stuck on wm6
thank you very much for ur reply. i got the 3 color on screen. pls advise meaning of "flash..." pls note im not a t mobile member
thank u so much for helping
Oh ok I can get that rom for you, well flash means to install. Let me ask you one quick thing is your phone tmobile branded. Like does it have the tmobile logo on it or not.
s 621 stuck on wm6
nop
the phone aint branded
i actually got wm6 and when i try to install it the black window says there s no device connected..
Um... Well use this file to reflash it okay. Make sure that the tri-colored screen is on when you try to install the rom (reflash means install ok)
http://rapidshare.com/files/7886560...S_1.33.422.1_4.1.13.51_03.07.90_Ship.exe.html
Related
Before 1 month my UNIVERSAL stuck on boot screen and like every one I'll start to test everything - including TASK 28 command to return him back but without succsess. Before 2 days some one put a thread about formating DOC and I remembered that I was try to format my DOC and after few weeks my Universal was stuck so MAMAICH wrote this:
mamaich said:
if you can enter bootloader - use "task 28 55aa", this would restore DOC to its original layout.
If you cannot - contact service center.
Click to expand...
Click to collapse
After this .... gues what .... EVERYTHIG run back to normal again
I will repeat myself:
MAMAICH
IF SOME ONE SAY THAT YOU'RE NOT A GOD - HI LIES !!!
AFTER THIS EVERYTHING IS RUNING OK ON MY OLD UNIVERSAL!!!
Thank you very very very MUCH !!!
Thank you again !!!
Hope this work to most of you
Oh My God !!!!! My Jasjar Recovered !!!!!!!
Thanks Alot !!!!!!!!!!!!!!!!!!!!!!!!!!!!!
where is this task28 55aa? cus im in the bootloader screen but i cant get anything else to work
Step by Step :
get the tools at attachment , as mamaich told, you have to use it in bootloader mode , (Power + Light Bulb + Reset)
1. Stop Activesync USB connection
2. Uni : Reboot Bootloader then Connect USB
3. PC : Run mtty1.42.exe
4. Choose USB in "Port" (Reconnect if can't find/reconglize USB and try remove sim and sd card)
5. type : task 28 55aa
6. Press Enter
7. Cause DOC reformatted, so there's no rom in DOC ,try reflash any rom that you like .
For task 28 55aa in mtty success , will show the message (attachment )
DONE .
i can only choose from COM1, COM2, and COM3, it doesnt find usb, and ive try reconnecting in
i find you must kill the wcescomm, wcesmgr and rapimgr exe's using task manager before you get the 'usb' option in mtty (kills activesync)
rite got a window come up in the progam
typed "task 28 55aa"
next line came as "USB>"
so is that it done? cus i aint seen anything else happen?
afaik, thats it
now reset back into the bootloader again and load a (whole, inc radio) ROM
stupid question here, but the update i installed earlier effed it up, so where can i get one that def works, and how do i install it on lol, im think
If you want to make sure it works i suggest getting the latest rom from your carrier (orange? - http://www1.orange.co.uk/business/download/m5000/M5000ruu.exe)
then you can upgrade (if you want to) to other, perhaps custom roms and a later radio ROM.
i got o2 rom im trying to install but it says it can only do it thru activesync, but that wont find my xda, any ideas how to bypass that?
thats because you killed activesync in the last process, start it again (from the start menu) and the upgrade should work
restarted my laptop and still activesync wont reckonise my xda, any other ideas? (its still boot loader mode, if i do a normal reset the screen just loads red and scrambled)
start the update process while in bootloader mode, you don't need activesync at all.
yeh i got the rom to install on it, went to soft restart it like it said, press 0 to conitinue, and wat a suprise a red, green and blue scrambled fuzzy screen, any ideas where to go now?
have you installed the rom yet? if not you need to reset it into bootloader mode (http://wiki.xda-developers.com/index.php?pagename=Universal_Resets) and then start the rom upgrade.
yeh i reset it in bootloader mode, and i installed the new rom from the o2 website, but it didnt work, so i need a rom that either puts it back to original 02 settings or rom that at least allows me to get a workin screen up again
what was wrong with the o2 one you had?
i went to sell my phone, so i wanted to clear the data permanently, but i thought id put an update on it to add to its features aswell, but the update effed it up big style, and now i cant sell a broken phone
someone add to wiki.
It might be very simple to all you educated guys, but I am sure there are a few more like me that are a bit baffled by some of the threads on here.
What would be REALLY nice would be a 'simple' step-by-step guide to installing wm6 on our devices, and what we need to download to achieve it, eg "you need this for MDACIII, and this for O2 Orbit"
Obviously anyone trying it runs the risk of buggering up their phone, but that's their own fault.
Any volunteers?
stunno said:
It might be very simple to all you educated guys, but I am sure there are a few more like me that are a bit baffled by some of the threads on here.
What would be REALLY nice would be a 'simple' step-by-step guide to installing wm6 on our devices, and what we need to download to achieve it, eg "you need this for MDACIII, and this for O2 Orbit"
Obviously anyone trying it runs the risk of buggering up their phone, but that's their own fault.
Any volunteers?
Click to expand...
Click to collapse
having asked the same question myself here goes.
Download USPL and follow the instructions. they are very clear.
Download
extract
connect phone with minimum 50% battery
soft reset and once started up fully run the app by clicking on Rom Update utility
follow the process through once finished your device will restart.
once restarted you then can flash the rom of your choice
I used Black and Blue again ran the update utility and bingo.
dont forget that all data on your device will be lost so make sure you have back up of contacts etc in outlook on pc.
Finaly make sure you have Activesync 4.5
enjoy
AS STATED ALTHOUGH THIS WORKS YOU ALL DO IT AT YOUR OWN RISK
Id just like to know really is that how many people have done it without unlocking the device for o2 orbit uk. i have one and am not really willing to try it unless i know there are people out there that have tried it and it worked.
as there is no rom install file from o2 for this, there is no way bacj and bricked phone is the only way forward. id like not to brick my phone as i need it daily.
so, has anyone with a locked o2 device upgraded to WM6 successfully and which rom did you use if it worked.?
joey jojo said:
Id just like to know really is that how many people have done it without unlocking the device for o2 orbit uk. i have one and am not really willing to try it unless i know there are people out there that have tried it and it worked.
as there is no rom install file from o2 for this, there is no way bacj and bricked phone is the only way forward. id like not to brick my phone as i need it daily.
so, has anyone with a locked o2 device upgraded to WM6 successfully and which rom did you use if it worked.?
Click to expand...
Click to collapse
i have o2 uk orbit and all is well
pof said:
I created update package for this ROM in NBH format, so no risk of bricking when flashing it, just unzip & run RomUpgradeUtility.exe
Download here:
ARTE_WWE_WM6.zip
NOTE: Before flashing you need to have Artemis USPL on your device.
Click to expand...
Click to collapse
Taken from Bepe's thread about the modified o2 German update. Basically you need to use the Artemis USPL program and then use the first link to install which I did successfully on a CID locked phone.
Thanks guys, but, unfortunately, the uspl thing does not work on my pc
Along with a few others I get the 'black screen' on my mdac3 then activesync disconnects and the rom loader throws up an error
Luckily my mdac3 survives through a soft reset
I think the idiots guide is not quite there yet
hi..
i have O2 uk orbit.. which is still locked, i fully charged the battery, completed a hard reset of the phone used the pof Artemis Update SPL (USPL) v.01 upgrade (wow what a brain box he is!) just in case it failed, so i could you use any NBH file to get you orbit to work again if i failed. Then used Bepe's WM6 os.nb file renamed it to windows.nb downloaded ATRE.zip unzipped the ARTE.zip file placed the windows.nb into the same directory, don't forget to edit UpgradeRom.bat file 0x3900000 to 0x3500000 with in the ATRE directory and copied and installed EnableRapi.cab to the phone. Reset it the phone and then started the UpgradeRom.bat! 12 mins later upgrade complete. Hard restart the phone.. Chewing nails by now... all went well did a soft reset of the phone before the O2 ExtROM autorun starts..
sorted, and did half way though a night shift at 3 am.. not bad at all!
crushuk said:
hi..
i have O2 uk orbit.. which is still locked, i fully charged the battery, completed a hard reset of the phone used the pof Artemis Update SPL (USPL) v.01 upgrade (wow what a brain box he is!) just in case it failed, so i could you use any NBH file to get you orbit to work again if i failed. Then used Bepe's WM6 os.nb file renamed it to windows.nb downloaded ATRE.zip unzipped the ARTE.zip file placed the windows.nb into the same directory, don't forget to edit UpgradeRom.bat file 0x3900000 to 0x3500000 with in the ATRE directory and copied and installed EnableRapi.cab to the phone. Reset it the phone and then started the UpgradeRom.bat! 12 mins later upgrade complete. Hard restart the phone.. Chewing nails by now... all went well did a soft reset of the phone before the O2 ExtROM autorun starts..
sorted, and did half way though a night shift at 3 am.. not bad at all!
Click to expand...
Click to collapse
Confused... is it really necessary to take all these steps? I thought that the only thing required is to run Pof's tool USPL, and after that run Romupdateutility.exe from the package in .nbh format (the link is just a few messages above yours). Please correct me when I'm wrong.
step by step guide
stunno said:
Any volunteers?
Click to expand...
Click to collapse
OK, I volunteered... This is a detailed list of steps how I installed a new ROM on my MDA Compact III (CID locked, at least I think so). It worked without any errors or problems. I used PDAVIET Black&Blue v2.0. It was my first flash on my Artemis, so I more than understand your need for step-by-step guide
1. download the file Artemis_USPL.zip
2. unpack into the folder c:\USPL
3. download the file ARTEMIS_Black_Blue_v2.zip
4. unpack into the folder c:\ROM
5. soft reset your phone and have it charged over 50% (I have it fully charged)
6. wait until the system starts on your Artemis
7. turn on flight mode (probably not necessary, but I wanted to minimize any risks)
8. connect your Artemis to PC with a USB cable
9. wait until ActiveSync icon in your tray (lower right corner of your windows desktop) turns from gray to green. If you connect your Artemis for the first time to PC, you do not need to set up synchronization, just click "cancel" on the first screen of "Synchronization Setup Wizard"
10. while ActiveSync icon is green, run c:\USPL\start_uspl.exe
11. a DOS screen will pop up with the text "Initializing: 0.." in the bottom indicating probably seconds from the start (it stopped around 70 in my case after about 1.5 min)
12. DOS screen disappears and PDA Phone ROM update utility pops up
13. at the same time, your Artemis turns blank (orange/green LED turns off as well)
14. tick the check box next to " I understand..." and then click Next
15. tick the check box next to " I completed..." and then click Next
16. a box saying "Verifying information on your PDA..." pops up
17. on the next screen click Update button
18. next screen says "Upgrade to ... image version 9.99" - click Next
19. Next screen says "You are now ready to update..." - click Next, a window with a blue progress bar appears with a text "Updating ROM image..", it quickly runs to 100%
20. next screen says "Congratulations! ..." - click Finish
21. your phone turns on and boots into your old system, however it should be CID unlocked now
22. your Active Sync should reestablish and icon turns green again
23. do not touch anything (phone or USB cable) and run C:\ROM\ROMUpdateUtility.exe (make sure activesync icon is green)
24. PDA Phone ROM Update utility window appears, tick the check box next to " I understand..." and then click Next
25. tick the check box next to " I completed..." and then click Next
26. a box saying "Verifying information on your PDA..." pops up
27. on next screen click Update button (says "Current information...")
28. next screen says "Upgrade to ... image version BnB2.0" - click Next
29. Next screen says "You are now ready to update..." - click Next
30. a window with a blue progress bar appears with a text "Updating ROM image..", your Artemis will have light gray screen with blue progress bar showing the progress of flashing - do not touch anything and wait (it took 2-3 minutes on my 3 years old PC)
31. next screen says "Congratulations! ..." - click Finish
32. your Artemis turns on and starts booting, you can disconnect it from PC now
33. the boot screen remains the same (T-Mobile in my case), so do not panic!! it is normal
34. wait until calibrate the screen appears, calibrate, choose time zone and you are ready to use your new OS
35. let me know if this manual was clear enough, whether it helped you and please suggest potential changes for improvement
Take care,
Dzim
i've just succesfully flashed my dutch CID-LOCKED MDA Compact 3 with this method, so i'd say it's reasonably fool-proof
A couple of questions before i take the plunge - if my t-mobile cmda iii is already CID unlocked, can i just go straight to the update rom part.
Also, is there any way of dumping my standard t-mobile rom first off? I'm having trouble trying to use itsutils due to the app lock.
Cheers Dzim!
Your instructions worked perfectly.
One very happy complete idiot here!
Furbious said:
A couple of questions before i take the plunge - if my t-mobile cmda iii is already CID unlocked, can i just go straight to the update rom part.
Also, is there any way of dumping my standard t-mobile rom first off? I'm having trouble trying to use itsutils due to the app lock.
Click to expand...
Click to collapse
There is a TMobile rom on here somewhere already, I just cant find it at the moment
My Compact 3 it’s death now. After pres voice commander button MDA start only to the boot loader. Can’t run complete system.
Pleas tell me. How can I write the new rom with WM5 or WM6 ?
OOPS! Working well apart from the "cant save word documents" bug!!
Just an update - to use the v1 or v2 black and blue, even though it is unlocked, you still need to use the supercid util.
Otherwise you get the rom update getting to 3% before crashing out to say the rom is corrupted.
I've now converted 2 other tmobile compact mda IIIs successfully, wm6 is much quicker
Yes, with my Compact was exactly as You say. Now is death. What I can do now to repair it.
big thanks to Dzim, used the idiots guide and now on wm6 =D
cheers!
PS: first post
Hi! Nemesis, try to connect your HTC to your pc in bootloader mode.
Lauch start_uspl.exe in USPL folder. Follow instruction on post N°9 by DZIM.
After USPL your HTC should reboot (maybe in bootloader mode only).
Launch the ROMUpdateUtility.exe in Black&Blue ROM v2 and follow instruction.
Thanks gguyaz
Pleas tell me.
Could I doing this upgrade with Windows Vista on my PC?
Hi to all, i am new to this forums. Need some help...
I just have an HTC s621, fisrt i believe it was locked, so I pay for
an unlocking code WorldWideWeb. I just got it and i realized that it
is not asking me for a code.
It suposed to ask me for a code with the wrong SIM inserted. But
what it does is ask me for "SIM PIN CODE" i inserted and then it
shows me the DATA CRASHES ..... ERROR.
Could some one point me in the right direction to fix this. I dont
need a better OS, i just need the phone to work I have a BlackBerry
Curve this one is for my mom, so just need the phone to work...
It is locked??? Could this be fixed?? How???
Thanks in advance....
pd: i have just see in a post a way but i do not understand and dont now where to find the files. Please GUIDE ME!!!!
please help me
Does a HardReset would help me in this???
The phone has Windows Mobile 5,
The ROM version is 1.15.515.1
Radio Version 4.1.13.42_02.89.90
And it doesn't seem to has any upgrade, so I don't believe it was a mistake in the installation or something. What do you think???
What do I need to eliminate this error and he ask me for the UnlockCode that I have??? That is all!!! PLEASE HELP ME!!!!!!!!!!!!!!!!!!!!!!
I just did a HARD reset form the FAQ, and now I have from Original but i still get DATA CRASHES message..
For info it was in spanish now....
PLEASE HELP ME!!!
hell.cu said:
pd: i have just see in a post a way but i do not understand and dont now where to find the files. Please GUIDE ME!!!!
Click to expand...
Click to collapse
Where did you see the post to fix this? Maybe we can help you with the directions if we read the post.
it was for the wizard device...... i already contact jogw99 haven't receive reply from him.
BTW it was because they want to unlock the device for 3rd party applications and something goes wrong. I only want to unlock the device for Any SIM use.
AND I HAVE THE CODE........... The deal is that i don't know why it came like that. I haven't touched at all....
PLEASE need help !!!
No one????
Is this so difficult. I am really stuck in here... What happends???
Hi, once again, so many people in this fourm and no one could help me???
I just need to know what steps do i need to follow to get the DATA CRASHES error go away!!!
PLEASE!!!!!!!!
hell.cu said:
Hi to all, i am new to this forums. Need some help...
I just have an HTC s621, fisrt i believe it was locked, so I pay for
an unlocking code WorldWideWeb. I just got it and i realized that it
is not asking me for a code.
It suposed to ask me for a code with the wrong SIM inserted. But
what it does is ask me for "SIM PIN CODE" i inserted and then it
shows me the DATA CRASHES ..... ERROR.
Could some one point me in the right direction to fix this. I dont
need a better OS, i just need the phone to work I have a BlackBerry
Curve this one is for my mom, so just need the phone to work...
It is locked??? Could this be fixed?? How???
Thanks in advance....
pd: i have just see in a post a way but i do not understand and dont now where to find the files. Please GUIDE ME!!!!
Click to expand...
Click to collapse
Sorry, i was out for a while.
is your problem already fixed ?
Not yet. Please could you help me???
hell.cu said:
Not yet. Please could you help me???
Click to expand...
Click to collapse
The following should solve your problem.
Good luck !
A) flashing ANY new ROM as CROSS-MODEL-ID update
B) Fix the "Data crashes"
In case you have problems please indicate the step letter/number which is not clear / not working for you.
Just do EVERYTHING EXCAT STEP BY STEP and everything will work.
---------
A)
Please do it EXACT step by step like described now and it will work (it is ESSENTIAL that you do it EXACT STEP BY STEP)
0) turn off antivirus/firewall/everything else running in background
1) start phone in windows, connect active sync (green circle in system tray of your pc)
2) start the unlocker (phone screen will turn white, active sync will disconnect, THIS IS NORMAL)
3) when asked for KEY-FILE or COMM ERROR#1 comes up WAIT 2 MINUTES (DON'T TOUCH ANYTHING)
4) DO NOT TOUCH PHONE AT ALL for ALL the next steps!!!
5) remove USB cable
6) close the unlocker on PC
7) reconnect USB cable
8) unpack the "RUU_Excalibur_TMO_US_1.20.531.1_4.1.13.34_02.79.90_Test.exe"
(right click on the .exe and select "Winzip->Unzip to folder..."
9) in the extracted folder you will find a file called like "RUU_signed.nbh" (.NBH), open it with HEX EDITOR (e.g. HexWorkshop) and locate the string like "EXCA20000" near the beginning of the file. Change it to "EXCA****" (all without the quotes, overwrite the DIGITS with STARS)
10) in the extracted folder you will find a file called like "RUU_Update.exe", open it with HEX EDITOR and SEARCH the string "BsaD5SeoA" and OVERWRITE it with "IMEICHECK" (all without the quotes)
11) start the just edited RUU_Update.exe now and make the ROM update (screen of phone will stay white ALL THE TIME, THIS IS NORMAL)
12) wait till update is complete and phone will start with the new ROM
13) To fix the "Data Crashes" problem just make a COMPLETE run of the unlocker (see B) ) and you are done.
---------
B) To fix the "Data crashes" you only have to make a COMPLETE run of the unlocker.
Please do it EXACT step by step like described now and it will work (it is ESSENTIAL that you do it EXACT STEP BY STEP)
0) turn off antivirus/firewall/everything else running in background
1) start phone in windows, connect active sync (green circle in system tray of your pc)
2) start the unlocker (phone screen will turn white, active sync will disconnect, THIS IS NORMAL)
3) when you get COMM ERROR #1 WAIT 2 MINUTES (DON'T TOUCH ANYTHING)
4) DO NOT TOUCH PHONE AT ALL for ALL the next steps!!!
5) remove USB cable
6) close the unlocker on PC
7) reconnect USB cable
8) start unlocker again and now it will complete the unlock
9) at next start the "Data Crashes" will be away.
wich unlocker did you use???
I believe you use IMEICHECK unlocker, but it cost 40 bucks. I dont need unlock I need fix the Data Crashes and enter the unlock code that i already have.
Thanks anywayyy
hell.cu said:
wich unlocker did you use???
I believe you use IMEICHECK unlocker, but it cost 40 bucks. I dont need unlock I need fix the Data Crashes and enter the unlock code that i already have.
Thanks anywayyy
Click to expand...
Click to collapse
For CID unlock, try this.
Try the USPL-CID BYPASS to see what happend.
When the screen turn white, choos the rom you want.
Hello Experts,
i have read a lot of the Threads here, but i can't find a good information
about my O2 Cosmo. My Dash is Simlook free and SuperCID enabeld.
I found this instructions:
Tools you need:
===============
- HexWorkshop from http://www.bpsoft.com/downloads/-
the ROM of your choice
- Winzip or Winrar
- a valid UNL file for YOUR phone
Preparation:
============
a) install HexWorkshop and Winzip or Winrar on your pc
b) in explorer on pc, RIGHT click on the ROM of your choice and use: "Extract files to folder ..." from conext menu Now it will unpack all the files
c) in the new folder you will have ONE file like "HRUU_signed.NBH" (*.NBH) RIGHT click on the .NBH file and use: "Hex Edit with Hex Workshop" from context menu
d) You'll see on the 5th row EXCA20000 ==> !!! make it EXCA***** (5 stars) and save the file
e) Now RIGHT click on ROMUpdateUtility.exe and use: "Hex Edit with Hex Workshop" from conext menu
Search for word "BsaD5SeoA" (without quotes, case sensitive)
You'll find it around address 0x3FC6C ==> !!! replace "BsaD5SeoA" with "IMEICHECK" (without quotes) and save the file
ROM-Update:
===========
1) take SIM card and SD card OUT of the phone
2) Connect the phone running windows ce to the pc (normal way).
3) Completely Unlock your phone using our unlocker <== REALLY IMPORTANT
4) After phone is unlocked run unlocker (again) BUT when the unlocker ask for UNL file, remove the USB cable from the phone THEN press "Cancel" on the unlocker select file window (unlocker will close on PC). NOTE: The screen on the device will not show something usefull when in this mode. Most probably it is complete WHITE. !!THIS IS NORMAL!! Don't touch phone, let it like it is!
5) After you closed the unlocker, attach usb cable again (phone has still white screen)
6) start (the modified) ROMUpdateUtility.exe
7) when update finished and device started you will get a message: "Data Crashed, contact service provider" (!NO PANIC!) ==> Simply fix this problem by running the unlocker again and this time select the key file normal way (full unlock process again). In case you have problems please indicate the step letter/number which is not clear/not working for you. If you REALLY do it STEP by STEP exact like described you will have no problem.
Click to expand...
Click to collapse
When i edit the .NBH file, i get a "ERROR 270" message!
When i dont edit the .NBH file, i get a "Invalid Ventor - Error Message"
I try to install this ROM:
"RUU_Excalibur_HTC_GER_1.11.407.2_4.1.13.28_02.63.90_Ship.exe"
So my Dash is a German Device, and i want a German ROM, if it is possible!?
OK, i try to go manually in the Bootloader modus, disable ActiveSync for
USB Transfer...and run the RUU Rom...but it allways break down the flash
process at 4% !
...mmh...have i forget any info, that you can help me...i dont know?
Ah Yes...i read in the Thread:
"How to flash a new ROM to your Wizard... a little tutorial!"
Here the link to:http://forum.xda-developers.com/showthread.php?t=298613
But i can see anything on the starting screen, if my dash ist a G3 or G4,
on my start screen ist "ABSOLUTLY - NO - Information" about it!
In the "System Information" i found a RIL Nr. 2.0002 ...
So i think my dash is a IPL/SPL G3...but i dont know it really!
I dont know what i can do anymore, to update my device to WM6.0 or 6.1
Plz, if anyone know what i can do, to fix my problem, plz then tell it to me,
thank you very much, and forgive me about my bad english!
Ok, i test many times this tool "Excalibur USPL- CID BYPASS" ...and yesterday
it works suddenly...i dont know "why" it works, i have done the same, like
every time i try it, but yesterday my dash move to the needed "WHITE
Screen"! And so i able to run the Rom Update, and it works fine!
Ah yes, my Phone tell me i'm in "SuperCID" Mode...so "WHY" i must use
this "CID Bypass Tool" ....crazy??? Or is my Phone a Liar...?
I have now installed this Rom, it Works a bit faster i mean:
RUU_Excalibur_HTC_GER_1.11.407.2_4.1.13.28_02.63.90_Ship.exe
But it is the same Rom Vers, like my old O2-Cosmo Rom, WM5.0 (1) with
Future Pack. But i have now the HTC Splash Screen!
So i want now to install this Rom (with WM6.1) :
"NoThrills_WM61_GER_V3.exe"
This is a "Kaiser" Rom... "Warum eigentlich Kaiser, hat der Beckenbauer damit
was zu tun...*g*
But when i try to run again the "Excalibur USPL- CID BYPASS" tool, my
dash show me only the "Linux Monkey" (Pinguin) Screen and hang up the
Phone, so that i must remove the battery....
The "White Screen" (that is the Screnn you must have to flash your Rom),
will dont come anymore....i dont know how...??? I start this batch file,
"Uspl.bat" ... and follow the instructions....mmh....allways i get the Linux
Monkey Screen...and not the white screen, "WHY" ?
Anybody a hint, how i can move into the "White Screen" Modus?
And a Question, is this Kaiser Rom compatible to my HTC S620 ?
Please belive me, i read a lot here...but i cant figure out this..., this Forum
here is a bit confusing, on many Threads you can read other informations!
Plz anyone, tell me (who know it) how i move exactly in the White Boot Screen?
Thank you!
If I understand you right you flashed a rom from the HTC Kaiser on your Dash. That's Windows Mobile 6.1 Professional for Touch Screen Devices. You need a rom from this thread for your Dash, not the Kaiser thread. Those ROM's are specifically for that phone. I doubt they'd even work on other Touch Screen phones because of it has the radio (I believe Radio is like Drivers in Windows, I may be wrong.) for that phone. As to fix your problem. I have no clue. Maybe you can get lucky and reflash it with an Official Dash ROM for your phone, but better getting advice on that from one of the more experienced people here. I'm a bit of a newby when it comes to this phone stuff. Good luck...
drkfngthdragnlrd said:
If I understand you right you flashed a rom from the HTC Kaiser on your Dash. That's Windows Mobile 6.1 Professional for Touch Screen Devices. You need a rom from this thread for your Dash, not the Kaiser thread. Those ROM's are specifically for that phone. I doubt they'd even work on other Touch Screen phones because of it has the radio (I believe Radio is like Drivers in Windows, I may be wrong.) for that phone. As to fix your problem. I have no clue. Maybe you can get lucky and reflash it with an Official Dash ROM for your phone, but better getting advice on that from one of the more experienced people here. I'm a bit of a newby when it comes to this phone stuff. Good luck...
Click to expand...
Click to collapse
Thank you!
But "NO" i don't flash my HTC S620 wit a Kaiser Rom..."What a Luck" ...i try
to do it...and now im Happy that this have not work for me!
I actually install this Rom:
RUU_Excalibur_HTC_GER_1.11.407.2_4.1.13.28_02.63.9 0_Ship.exe
I have now understand, what is a Kaiser ROM, it is the Device Name, oh
Man...i'm so a dummy....haha...
But i have a success, i change my O2 Rom to a HTC Rom
The Question now is, how i move in the "WHITE BOOT SCREEN" ?
That i'm able to Update my Rom to a WM6.1, if posible, a German 6.1 Rom.
Is here a German WM6.1 Rom?
Is a WWE a Multilingual Rom, is in such ROMs German Language included?
And how i can remove the CID forever, so that im able to update a ROM
without a CID Bypass Bootloader?
Any ideas?
The thing is, ...this CID Bypass Bootloader work "ONCE" and now that
Bootloader dont work anymore...i dont know why...i get only the Linux
Pinguin Screen...and this is a "Hang up Screen" so that i must remove
the Battery, for a new start.
But i get nevermore the "White Boot Screen" ...how is this posible?
I do the same, like before i do...mmh...???
If I understand what's been said. You need to re-run the CID-Bypass anytime you reflash you phone. As for a German ROM. I am not sure. Ypu'd need to look around through the furom. You could try the "Seach" feature and see what you come up with.
drkfngthdragnlrd said:
If I understand what's been said. You need to re-run the CID-Bypass anytime you reflash you phone. As for a German ROM. I am not sure. Ypu'd need to look around through the furom. You could try the "Seach" feature and see what you come up with.
Click to expand...
Click to collapse
Thank you,
but i try to run the "CID Bypass" but the "CID Bypass" run every time
into the "Linux Pinguin Screen" ...(i think it is programed in Linux?)
But the same "CID Bypass Bootloader" - work - for me "once" !
But now, not ! I dont know why?
With this CID Bypass Bootloader, i flash my Q2 Rom into a HTC Rom !
But that was only possible, as my dash move with this "CID Bypass Bootloader"
INTO a "White Boot Screen"...!
But "HOW" this was possible...i dont know...now this CID Bypass Bootl.,
wont work anymore....
You know what i mean?
The same tool (CID Bypass) wont work anymore, it work one time only.
When i now try to run this CID Bypass, i get a "Linux Pinguin Screen" in
Black. So there is a little Linux Pinguin "Preloader" ...and then the Phone
have a SOD..."Stand of Death" you Guys call that so, i think so!?
To search here, is very strange for me....i get results of all Forums here!
That was the reason why i want to try the Kaiser Rom, while i search
here in the Excalibur Forum...so i had think so, that was wrong, you know!?
Sorry, my english is not good enough to tell exactly my expirience!
But Thank you for Advice!
Hum, does it still look like windows mobile? If so they may have just changed the load screen. Either way when you run the bypass program, there' one step that'll show a screen on the phone when in windows mobile itself and you must press the center soft button to "continue" and then it'll enter the white screen mode. Sometimes I forget this step and bounce through the steps missing that. If you can't get into windows mobile, try reflashing with your phones official ROM first. They don't require the white screen. There's also a way to enter the bootloader screen by holding down a button, I forget which, while you press power to turn the phone on.
drkfngthdragnlrd said:
Hum, does it still look like windows mobile? If so they may have just changed the load screen. Either way when you run the bypass program, there' one step that'll show a screen on the phone when in windows mobile itself and you must press the center soft button to "continue" and then it'll enter the white screen mode. Sometimes I forget this step and bounce through the steps missing that. If you can't get into windows mobile, try reflashing with your phones official ROM first. They don't require the white screen. There's also a way to enter the bootloader screen by holding down a button, I forget which, while you press power to turn the phone on.
Click to expand...
Click to collapse
...no no, this ROM runs great! I have no Problem with this Rom!
But i have found a Solution "Yeah" !
For all who want to flash a O2 Cosmo!
Try this Link: Click
Thanks to the Uploader, found it by searching!
The last in line: "Unlock_phone_files.zip" !
Follow the steps in the text document!
Work fine for me!
But when you want to flash, and you get a connection ERROR, remove
the USB cabel, and put it back on your Dash, and run then only the
"ROMUpdateUtility.exe" again and it will work.
(Your srceen are allways WHITE!!!)
I had flash for 10min the "RUU_Excalibur_SPL-1.11_UpgradeOnly.exe"
You must extract the exe file, and copy the *.nbh file to folder 3!
After you run the "Auto.bat" and the Connection Error, click finish,
remove the USB cabel, put it back on the dash and run again and only
the "ROMUpdateUtility.exe" !
All work fine!
Thank you Developers!
howdy, using a diamond with stock 1.93.479.3 WWE rom and am trying to install Olinex SPL and then a new rom, the problem is that I get [Error 202] when I try to install (using ROMUpdate Utility)... I read that to solve this issue I have to tick 'enable advanced network functionality', but as soon as I do, the activesync connection drops.
Anyways to work around this.. do I have to have 'enable advanced network functionality' ticked for the installation to work?
Cheers.
EDIT: forgot to mention I have windows mobile 6.1, and am using XP with service pack 3.
zdave said:
howdy, using a diamond with stock 1.93.479.3 WWE rom and am trying to install Olinex SPL and then a new rom, the problem is that I get [Error 202] when I try to install (using ROMUpdate Utility)... I read that to solve this issue I have to tick 'enable advanced network functionality', but as soon as I do, the activesync connection drops.
Anyways to work around this.. do I have to have 'enable advanced network functionality' ticked for the installation to work?
Cheers.
EDIT: forgot to mention I have windows mobile 6.1, and am using XP with service pack 3.
Click to expand...
Click to collapse
hi from what I can recall the activesnyc should drop, and the device into a multi couloured screen (bootloader) and then reconnect and the process begins
so what steps should I take exactly? enable advanced network functionality, then put it in bootloader and then sync it once more?
bump...nein?
bump..no one experienced the same?
zdave said:
bump..no one experienced the same?
Click to expand...
Click to collapse
Hello, Zdave!
Maybe I can help you to get into the boot screen multicolor ...
First, connect your phone to USB cable (be sure that the battery is over 50% energy), then using your stylus, reset the device, press and hold volume down key until the screen appears multicolored, should to show your type of connection, in seconds, "USB". Now go to where you installed the program and resume the installation ... I hope I was helpful ...
from my knoledge, the advanced network .... works on some computers (hardware) and doesn't on others.
You should try to enable this option, and use another pc.
hope this helps.
kokocf said:
Hello, Zdave!
Maybe I can help you to get into the boot screen multicolor ...
First, connect your phone to USB cable (be sure that the battery is over 50% energy), then using your stylus, reset the device, press and hold volume down key until the screen appears multicolored, should to show your type of connection, in seconds, "USB". Now go to where you installed the program and resume the installation ... I hope I was helpful ...
Click to expand...
Click to collapse
Activated bootloader, and hit the installation... but same thing, it wouldn't install. The screen, however, changed to a greyscale tint with a percentage... which is good, but It was still stuck at 0%..no movement on the PC as well (stuck at 0%).. then it goes to some recovery mode, which I skip because the phone starts normally (doesn't revert to the tricolour screen).
maybe there's a timed way to activate bootloader during the installation process? I've read most guides but maybe i'm missing something.. or my diamond/PC is messed?
zdave said:
Activated bootloader, and hit the installation... but same thing, it wouldn't install. The screen, however, changed to a greyscale tint with a percentage... which is good, but It was still stuck at 0%..no movement on the PC as well (stuck at 0%).. then it goes to some recovery mode, which I skip because the phone starts normally (doesn't revert to the tricolour screen).
maybe there's a timed way to activate bootloader during the installation process? I've read most guides but maybe i'm missing something.. or my diamond/PC is messed?
Click to expand...
Click to collapse
I do not know how I could help you , but bootloader immediately cancel the installation, where what you want to install is not intended for your device type, eg if for CDMA, or if for other model in addition to Diamond, I just happened when I wanted to put in mine, an operating system for Touch Pro... ,check again, if what you want to install is for your device.
God speed!
zdave said:
Activated bootloader, and hit the installation... but same thing, it wouldn't install. The screen, however, changed to a greyscale tint with a percentage... which is good, but It was still stuck at 0%..no movement on the PC as well (stuck at 0%).. then it goes to some recovery mode, which I skip because the phone starts normally (doesn't revert to the tricolour screen).
maybe there's a timed way to activate bootloader during the installation process? I've read most guides but maybe i'm missing something.. or my diamond/PC is messed?
Click to expand...
Click to collapse
Seems that u have to load a Hard-SPL.
Please Follow the Steps in:
http://forum.xda-developers.com/showthread.php?t=416211
or Use the search function.
Stuck @0% its a know issue without Hard-spl. Has nothing to do with ur a-sync problem...
mastah said:
Seems that u have to load a Hard-SPL.
Please Follow the Steps in:
http://forum.xda-developers.com/showthread.php?t=416211
or Use the search function.
Stuck @0% its a know issue without Hard-spl. Has nothing to do with ur a-sync problem...
Click to expand...
Click to collapse
used the search function thanks, but the whole point is that I'm trying to install the HardSPL (as stated in the original post). The installer mentions my current SPL and the one that is about to be installed (Olinex).
aww sorry, was late and seems taht i didnt read exactly..
tried to turn off Firewall? AV?
I never had probs with the option ticked on. But i think also without.
Have a look on the flashing method of HSPL, if i remind correctly u dont
have to put ur phone in Bootloader mode.
Instead it will load a sspl and reboot ur phone for flash HSPL. Then activesync
will loose connection and the RUU takes over.