Develop Bugs

Guide to upgrading Universal with MaUpgradeUt_noID.exe

How to update your rom to the latest I-mate version (with push email) and Radio 1.09.0 using the MaUpgradeUt_noID.exe method
1 – download the file “Universal_Upgrade_v1.30.68_radio_1.09.0.zip” from the ftp site (see bottom of post for details)
2 - double click the file and allow it to unpack into a folder
3 – right click on the active sync icon in your tasks tray on you pc (at the stage you should NOT have you universal plugged in)
4 – select connection setting then untick “allow USB connections”
5 – Now take your Universal and take out the SIM and MEMORY CARD
6 – Press light + power + reset with the phone on, this will place the universal into bootloader mode
7 – Connect your Universal via the USB cable to your computer directly i.e. not though a USB hub
8 – Now double click on the program called “MaUpgradeUt_noID.exe” (found in to folder from step 1) this will start the upgrade process, the first stage takes about 3 to 5 minutes to complete, you will then be presented with a screen showing a “Imate Jam” and some information about what you are upgrading to, don’t be worried if this screen does not show you the version numbers you have at present that is normal.
9 – Now continue with the process by clicking upgrade/next
10 – After sometime (about 20 minutes) you should be at the end screen tell you to unplug and reset you “jam” So now unplug your universal and reset it and that’s all there is to it!
Note that during the upgrade process you can follow the progress by also looking at your universal screen with a light source as the backlight will be off.
I hope this post helps someone as looking around the forum Im amazed by the amount of people asking “how do I upgrade my rom” or “I only get a “country id error” when trying to update”
The “Universal_Upgrade_v1.30.68_radio_1.09.0.zip” file can be found here
ftp://xda:[email protected]/Uploads/Universal/Universal_Upgrade_v1.30.68_radio_1.09.0.zip
This file contains the latest imate beta rom v1.30.68 and the latest radio 1.09.0 plus all the tools you need
Oh and if anyone thinks Ive missed something out please post and let me know!

File as been moved its now at :-
ftp://xda:[email protected]/Universal_Upgrade_v1.30.68_radio_1.09.0.zip
This file contains everything need to upgrade your universal

Thanks rat - very cool of you to post up a guide. How Nb is it to remove your SIM?

wamatt said:
Thanks rat - very cool of you to post up a guide. How Nb is it to remove your SIM?
Click to expand...
Click to collapse
No sure I understand the question however Ive updated before now with the sim card in however lots of people report that its important to remove both the memory & sim cards so Ive included it because its better to be safe than sorry

Thanks I'll play it sorry :/..

BTW do you have to use this NOID method if you have an IMATE too?

wamatt said:
BTW do you have to use this NOID method if you have an IMATE too?
Click to expand...
Click to collapse
No you should be ok using the orginal package, however this way will still work

I installed the ROM but after the installation is finished and I reset the device I only get a blank screen.

Piesang said:
I installed the ROM but after the installation is finished and I reset the device I only get a blank screen.
Click to expand...
Click to collapse
Blank screen but do you have the USB or SERIAL written on the Screen?
Rat didn't mention in his post but it comes out in the last screen that it is supposed to be a HARD RESET which will bring about a menu where you have to press 0 (Zero) to ahrd reset the device. hope this helps

Yip, sorry, That's correct. I get the screen that says I have to press 0 to reset or X to exit.
If I press 0 the screen goes blank and stays like that.
I've installed the previous ROM now and it is working perfectly. It's just the new ROM on this page doesn't want to work on my Jasjar.

Piesang said:
Yip, sorry, That's correct. I get the screen that says I have to press 0 to reset or X to exit.
If I press 0 the screen goes blank and stays like that.
I've installed the previous ROM now and it is working perfectly. It's just the new ROM on this page doesn't want to work on my Jasjar.
Click to expand...
Click to collapse
I downloaded it straight from the first post and it installed flawlessly...
Have you tried installing it from bootloader mode instead of direct update? And without SD card in the PDA? This might work.
BTW, I have returned to the older ROM.... advantages don't outweigh the disadvantages.
My phone keeps on hanging (for the 1st time ever after 5 months use and different ROMs) on the screen where it shows whose calling. I havent answered the call yet but it stops ringing. When i open the PDA it has ANSWER on the left softkey and pressing this doesn't do anything. Will wait for the release..
It is a lot faster thought (the test ROM)

Thanks for the info. I'm not gonna bother upgrading now. I'll wait for a decent ROM later.
Thanks m8

umm - stupid question I know.....
But what does this actually DO??
I understand that this will upgrade the radio stack and thus produce better reception etc - but what else will it do??
If I have an Orange M5000 will I still be able to use it on Orange's network?? Do i need to fill in any settings? Do I need to make notes of certain stuff beforehand? If so - what settings?
I assume this will totally rewrite the registry and what programs are on teh device - or will it??
I suppose a lot of this information is available on the forum - but tracking it down can take a lot of time for someone who's not necessarily that 'au fait' with the working of the device.

Riceburner said:
umm - stupid question I know.....
But what does this actually DO??
I understand that this will upgrade the radio stack and thus produce better reception etc - but what else will it do??
If I have an Orange M5000 will I still be able to use it on Orange's network?? Do i need to fill in any settings? Do I need to make notes of certain stuff beforehand? If so - what settings?
I assume this will totally rewrite the registry and what programs are on teh device - or will it??
I suppose a lot of this information is available on the forum - but tracking it down can take a lot of time for someone who's not necessarily that 'au fait' with the working of the device.
Click to expand...
Click to collapse
I also have an orange M5000 which I would like to get off Orange to use my Vodafone SIM - would installing this new ROM be the way to go ?

not if your phone is simlocked (or network locked). new rom is only the software.

Yeah, sorry
Just reading the other thread on this - sorry , am a relative newby.
It looks like MachineGod and Buzz are on the case though - and with their track record........

I wanted to confirm that Ratcom's file he linked to is good (not corrupt) and his method for upgrade works. Nice work, Ratcom.

ratcom said:
File as been moved its now at :-
ftp://xda:[email protected]/Universal_Upgrade_v1.30.68_radio_1.09.0.zip
This file contains everything need to upgrade your universal
Click to expand...
Click to collapse
Hi ,
Can let me know the speed of the Os did u face any problems after upgrade.
E.g Apps, Hanging , Memmory leaks. Etc. Cheers

I had no problems what so ever with this rom, the speed of the os was breathtaking.

ratcom said:
I had no problems what so ever with this rom, the speed of the os was breathtaking.
Click to expand...
Click to collapse
Does this rom work on dopod 900?
Is this is final release?
Cheers,

Original English WM 6.0 ROM for M88 MiPhone available for download!

English OS System 20080801 Edition (ROM image) for M88 MiPhone
Please download from here
If somebody knows how to enter the bootloader mode of this phone please share here with us!
Here is the instruction for this procedure from the supplier which is nor working for me:
"English OS System 20080801 Edition (ROM image) available for download
- To update ROM, format your TF card with FAT32 and unzip all files and folders from the downloaded file into the root folder of the TF card. Then, restart the phone to begin updating. This update converts all non-English versions of this phone into English version."
If somebody can manage to install the ROM please write here the steps!
Thanks!

You can get to the flash update by pressing RESET, MENU, and POWER all at the same time, then release RESET first and wait for a message. The message will tell you to release POWER to do a hard-reset or MENU to do a flash update. In this case, you will release MENU first, then you will get a message asking if you want to update from SD. At this point, none of the buttons do anything so I assume you have to tap the touchscreen. My touchscreen is broken so I couldn't get any further than this.

Problem Fixed!
GnatGoSplat said:
You can get to the flash update by pressing RESET, MENU, and POWER all at the same time, then release RESET first and wait for a message. The message will tell you to release POWER to do a hard-reset or MENU to do a flash update. In this case, you will release MENU first, then you will get a message asking if you want to update from SD. At this point, none of the buttons do anything so I assume you have to tap the touchscreen. My touchscreen is broken so I couldn't get any further than this.
Click to expand...
Click to collapse
Thanks for your help, m8. It didn't work that way for me. I was adwised to do this:
1. Duplicate the update.img file and rename the second one as "uploader"
2. Copy both "update.img" and "uploader" on the SD - formatted in FAT32
3. Press POWER and HOME butons at the same time.
4. There are two possible options from here:
a) White screen with blue text showing "Upload image... please wait..."
b) Red screen with the options what to do in the next step -
5. I saw first the a) option - the white screen. So after 3 minutes of waiting the phone said it is done and it will selfrestart. After the restart - voila! There was the English OS loaded on my phone and everything was working perfect!
Hope this to help to other people too!

Wow! It was very detailed and finally i resolved my problem. Thanks!
Does somebody knows how can i uninstall the fung S2U2? It causes a lot of problems with the horizontal screen ant others. It's not in the list of "remove programs".

Check this out:
ZEMONTI said:
Wow! It was very detailed and finally i resolved my problem. Thanks!
Does somebody knows how can i uninstall the fung S2U2? It causes a lot of problems with the horizontal screen ant others. It's not in the list of "remove programs".
Click to expand...
Click to collapse
Check this out:
Resco explorer
Pocket Mechanic
Pocket Toolman
Resco is very useful thing so the other two are very powerful as well. You will definetely uninstall S2U2 with more than one of them.
Good luck!

Hi, is it existing a French release of this rom for M88 or can you help me for translate it ? Cordialy
Sorry for my english very bad...

MMS works in this rom?

MMS works only with Arcsoft_MMS_Composer_v5.0.31.16
bye
Mark

i have aquestion... : I was screwing around with the m88 phone and put in the original rom in (I've done this many times) but this time i forgot to use the other three files .img and ... i only had the update.img in the card... then when i tried flahing it , it was reading but the battery fell out and now it wont turn on.... any ideas on how i can fix this... ???? I really need the help please!!! If it is possible to fix this.

helppp
I need help i was updating mi os , but it takes more than a half of hour , and now it wont turn on again how can i fix that? thanks?!

problems
i have a daxian +999
i flash it whit that file it work but now i have a white screen the phone looks like ok but nothing shows in the screen only a white screen what i can do ??

My touchscreen does work but I get the white screen asking me "updated from SD card?" then it just sits there. I dont have a keyboard to hit Y. None of the buttons do anything. Touching the screen does nothing.
*edit* figured it out. You just keep holding the power button down. Then it flashed to a solid purple screen. I went wtf.... it screwed up again? then after a few minutes it booted up.

problems in m89
hello, I recently bought a M89.
In general the phone is great, but mine has a very big problem.
As a PDA it works great, but when I insert my SIM card the phone just freezes. It works for just a minute after the SIM is inserted. I've even been able to make one or two calls before it freezes.
But past one or two minutes it just stops working. It doesn't respond to anything at all, the only solution is to remove the battery.
I think the problem is in the firmware. I've reinstalled a bunch of diferent firmwares: wm6 english, wm6.1 spanish, wm6 english again... and nothing works.
can anyone help me???, 'cause this is really killing me :'(
Thanks in advance!

oic0 said:
My touchscreen does work but I get the white screen asking me "updated from SD card?" then it just sits there. I dont have a keyboard to hit Y. None of the buttons do anything. Touching the screen does nothing.
*edit* figured it out. You just keep holding the power button down. Then it flashed to a solid purple screen. I went wtf.... it screwed up again? then after a few minutes it booted up.
Click to expand...
Click to collapse
Just wondering - What is the size of your microSD card.
As far as I know m88 does not support SD card greater that 4 Gb by default.
Please, let us know.

Updated from SD Card ?
Hello, first of all I want to say thank you because I learned a lot from this thread. I bought M88 phone some months ago and is the first time I cannot use ( I really don't know what went wrong but finally the phone is not working or frezze ).
I bought 2Gb card and was formatted in FAT32. I also complete all steps in order to load the original image but I got this message: "updated from SD card?" and nothing more... What button must be pressed ?
I'll go crazy... do you know what's the next step ?
Thank you very much.

i dont understand sorry. i have to copy the "update" imgfile and rename it as "uploader"... and leave this two files : "update and uploader" in the root folder ?

I've install ROM from this topic: http://forum.xda-developers.com/showthread.php?t=452848
and now, when I try power on my MiPhone - it show only white screen - please help!

bootloading
the file, atleast on windows 7, shows up as "update". Also, I found it works must faster and easier to make 3 copies (4 files total)
naming 1: update.img
2: uploader.img
3: Update
and 4: uploader
(so the last 2 don't actual have .img in the title)
Then just make sure you hold down both the buttons, and vuo-la! haha
Doesn't fix the MMS problem though.
Does anyone know how to make it so that it can use mms?

Miphon m88
Danke es funktioniert supper !!

i got white screen too ;[ how to fix my phone now ;/ i dont see enythink ;[

"enable advanced network fuctionality"

howdy, using a diamond with stock 1.93.479.3 WWE rom and am trying to install Olinex SPL and then a new rom, the problem is that I get [Error 202] when I try to install (using ROMUpdate Utility)... I read that to solve this issue I have to tick 'enable advanced network functionality', but as soon as I do, the activesync connection drops.
Anyways to work around this.. do I have to have 'enable advanced network functionality' ticked for the installation to work?
Cheers.
EDIT: forgot to mention I have windows mobile 6.1, and am using XP with service pack 3.

zdave said:
howdy, using a diamond with stock 1.93.479.3 WWE rom and am trying to install Olinex SPL and then a new rom, the problem is that I get [Error 202] when I try to install (using ROMUpdate Utility)... I read that to solve this issue I have to tick 'enable advanced network functionality', but as soon as I do, the activesync connection drops.
Anyways to work around this.. do I have to have 'enable advanced network functionality' ticked for the installation to work?
Cheers.
EDIT: forgot to mention I have windows mobile 6.1, and am using XP with service pack 3.
Click to expand...
Click to collapse
hi from what I can recall the activesnyc should drop, and the device into a multi couloured screen (bootloader) and then reconnect and the process begins

so what steps should I take exactly? enable advanced network functionality, then put it in bootloader and then sync it once more?

bump...nein?

bump..no one experienced the same?

zdave said:
bump..no one experienced the same?
Click to expand...
Click to collapse
Hello, Zdave!
Maybe I can help you to get into the boot screen multicolor ...
First, connect your phone to USB cable (be sure that the battery is over 50% energy), then using your stylus, reset the device, press and hold volume down key until the screen appears multicolored, should to show your type of connection, in seconds, "USB". Now go to where you installed the program and resume the installation ... I hope I was helpful ...

from my knoledge, the advanced network .... works on some computers (hardware) and doesn't on others.
You should try to enable this option, and use another pc.
hope this helps.

kokocf said:
Hello, Zdave!
Maybe I can help you to get into the boot screen multicolor ...
First, connect your phone to USB cable (be sure that the battery is over 50% energy), then using your stylus, reset the device, press and hold volume down key until the screen appears multicolored, should to show your type of connection, in seconds, "USB". Now go to where you installed the program and resume the installation ... I hope I was helpful ...
Click to expand...
Click to collapse
Activated bootloader, and hit the installation... but same thing, it wouldn't install. The screen, however, changed to a greyscale tint with a percentage... which is good, but It was still stuck at 0%..no movement on the PC as well (stuck at 0%).. then it goes to some recovery mode, which I skip because the phone starts normally (doesn't revert to the tricolour screen).
maybe there's a timed way to activate bootloader during the installation process? I've read most guides but maybe i'm missing something.. or my diamond/PC is messed?

zdave said:
Activated bootloader, and hit the installation... but same thing, it wouldn't install. The screen, however, changed to a greyscale tint with a percentage... which is good, but It was still stuck at 0%..no movement on the PC as well (stuck at 0%).. then it goes to some recovery mode, which I skip because the phone starts normally (doesn't revert to the tricolour screen).
maybe there's a timed way to activate bootloader during the installation process? I've read most guides but maybe i'm missing something.. or my diamond/PC is messed?
Click to expand...
Click to collapse
I do not know how I could help you , but bootloader immediately cancel the installation, where what you want to install is not intended for your device type, eg if for CDMA, or if for other model in addition to Diamond, I just happened when I wanted to put in mine, an operating system for Touch Pro... ,check again, if what you want to install is for your device.
God speed!

zdave said:
Activated bootloader, and hit the installation... but same thing, it wouldn't install. The screen, however, changed to a greyscale tint with a percentage... which is good, but It was still stuck at 0%..no movement on the PC as well (stuck at 0%).. then it goes to some recovery mode, which I skip because the phone starts normally (doesn't revert to the tricolour screen).
maybe there's a timed way to activate bootloader during the installation process? I've read most guides but maybe i'm missing something.. or my diamond/PC is messed?
Click to expand...
Click to collapse
Seems that u have to load a Hard-SPL.
Please Follow the Steps in:
http://forum.xda-developers.com/showthread.php?t=416211
or Use the search function.
Stuck @0% its a know issue without Hard-spl. Has nothing to do with ur a-sync problem...

mastah said:
Seems that u have to load a Hard-SPL.
Please Follow the Steps in:
http://forum.xda-developers.com/showthread.php?t=416211
or Use the search function.
Stuck @0% its a know issue without Hard-spl. Has nothing to do with ur a-sync problem...
Click to expand...
Click to collapse
used the search function thanks, but the whole point is that I'm trying to install the HardSPL (as stated in the original post). The installer mentions my current SPL and the one that is about to be installed (Olinex).

aww sorry, was late and seems taht i didnt read exactly..
tried to turn off Firewall? AV?
I never had probs with the option ticked on. But i think also without.
Have a look on the flashing method of HSPL, if i remind correctly u dont
have to put ur phone in Bootloader mode.
Instead it will load a sspl and reboot ur phone for flash HSPL. Then activesync
will loose connection and the RUU takes over.

Urgent help required.

Hi.
I'm trying to flash the new Gen Y D2 R5 WM 6.1 ROM... I've completed the MTTY method and now I have the device in bootloader and plugged into the USB and it's recoginising the USB on bootloader but when I try to run the RUU to flash the actual ROM it says connection error.
I've tried allowing connection and not allowing connection on Active Sync but it's still not working. The furthest it's got it going to the percentage screen and sticking at 0% and then appearing saying connection error.
Please can you help your urgently... any help will be highly appreciated and will donate via PayPal as I need this sorting like ASAP.
Mark.

Just to be sure, did you run HardSPL?

i assume you had hardspl as you can run mtty.
please refer to this as both of your problem looks similar.
http://forum.xda-developers.com/showthread.php?t=608055

Internal Storage Flashing
Sometimes flashing via internally corrects this.
COOKING ROMs & Radios from phone =-
1. open from your PC the rar or zip archive and extract only the BIG .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. soft reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache

It's all good now just needed a hard reset. I think I've learned a lesson when it comes to flashing a new ROM lol. Love the new ROM and this version of TF3D.

good to hear it worked out..have fun with your 'new' device

Cheers bud.
Any ideas why the weather feature isn't working for me. It cant find my location and even if I add my location it can't update the weather info for my location?

how do you connect to internet? 3G? Wifi?

Through 3G most of the time and sometimes I get an EDGE signal. I just got an error message saying "There was a connection error while attempting to download weather data"
Any ideas how I can solve this.

Nirak said:
how do you connect to internet? 3G? Wifi?
Click to expand...
Click to collapse
wifi: enable in comm, popup to connect
3g: no idea soz

So what your saying is I have to connect via WiFi to allow me to download the weather updates.
How am I meant to downlaod the weather data on the go when I am not at home.
EDIT: It seems to be working fine just needed to change the time and location to my current one in menu.

Boyo92 said:
So what your saying is I have to connect via WiFi to allow me to download the weather updates.
How am I meant to downlaod the weather data on the go when I am not at home.
EDIT: It seems to be working fine just needed to change the time and location to my current one in menu.
Click to expand...
Click to collapse
Nope, that's not what i meant...lol, i was only trying to figure out why it worked for me and not for you.
Glad it's all okay now

Cheers for your help mate.

Storex Ezee'TAB901 root JB 4.1.1

hi,
After spending many time trying to root my storex tab 901 I bought in france (Already installed on 4.1.1 with google play), Iwas finnaly able to root it using adb and command line.
to do so:
- Download attached file
- Download from google SDK usb_adb_driver
- Go to your device parameters-> USB -> enable debbuging mode
- create a c:\root folder on your windows XP computer then Extract the zip file attached into it.
- Plugin your device to the computer, when prompted for driver, use google sdk USB_ADB_Driver
- When done, open a windows terminal command line
- type: c:
- type: cd \
- type: cd root
- type: cd rootkit
- type: go.cmd
If everything goes well, your tablet should reboot. you can try installing the free app from google store called "Root checker" to confirm your device is properly rooted.
Also, if you lost the original rom and live suite, here is the link to download the latest build from storex web site:
(I will post the link later when I find it)

JB 4.2.2
CAUTION: USE THIS ROM AS YOUR OWN RISK.......Be sure you have the official rom in case it is not working for you. It appears that even though you have the same tablet Reference, depending on when you buy it, hardware might be a bit different and most likely you will take the risk of having a unusable Touch screen or wifi...
I found out you can fully use your Ezee Tab 901 4.2.2
you can install rom from Manta MID 13.
You will be able to install the rom using Livesuite.
Gain:
- Android 4.2.2
- Root Access out of the box
- Play store installed.
Everything will be working
For the link type in google:
MID13 Android 4.2.2 Jelly Bean - Manta Multimedia Info
select google link called: manta.info.pl
select the link catshare or 4shared.
Start live suite 1.7, select the download img file, do a format when prompted. You done.
When the tablet restart, go to the parameter icon, and change language to French or english
Procedure on the Ezee tab 901 with livesuit:
- completly turn off the tablet, unplug cable
- start livesuite and select the downloaded image file
- keep the VOL- button pressed and plug the usb cable
- without releasing the VOL- button press the Power button 6 times.
- You should hear windows sound saying a USB device has been plugged
- if windows request it, install the driver from Livesuitefolder\usbdriver
- Livesuite should automatically start the flashing process.
- when prompted, "Format device" press YEs.
- When it s 100% you tablet should reboot.
Done.
Note: I did not invent anything, thanks to the good work of MANTA team members. I just found out this rom works on my tablet out of the box.

Hi,
Thanks for sharing these tips. I'm gonna try to update to 4.2.2, hoping this is going to fix some problems with this tablet.
I've been looking a lot for information about how to update ezee tab 901, so you did definitely a great work !
edit : iflash went well, but touch screen is not responding anymore. Any idea of how to solve it ?
Thanks.

samus64 said:
Hi,
Thanks for sharing these tips. I'm gonna try to update to 4.2.2, hoping this is going to fix some problems with this tablet.
I've been looking a lot for information about how to update ezee tab 901, so you did definitely a great work !
edit : iflash went well, but touch screen is not responding anymore. Any idea of how to solve it ?
Thanks.
Click to expand...
Click to collapse
Hi,
did you try going into recovery mode and factory reset? (shutdown tabel completely and keep press on volume+key then press power button)
in the menu, using vol+/- scroll down to wipe factory reset and validate by pressing the power key.
Let me know how it goes.
btw, are you sure your tablet is a Ezee tab 901 and not 971?
Cheers

Hi,
Yes I've got 901 and not 971 (written on the back of the device). I tried factory reset , but still the same problem. However, I flashed again with the original rom, and then touch screen went functional again but the wifi switch is kinda "broken" : it's impossible to turn on wifi from the Settings menu.
I returned the tablet where I bought it, seems there's a sort of material problem with it :/

samus64 said:
Hi,
Yes I've got 901 and not 971 (written on the back of the device). I tried factory reset , but still the same problem. However, I flashed again with the original rom, and then touch screen went functional again but the wifi switch is kinda "broken" : it's impossible to turn on wifi from the Settings menu.
I returned the tablet where I bought it, seems there's a sort of material problem with it :/
Click to expand...
Click to collapse
Im sorry to hear that, i dont think something is broken, i had the same issue with a memup tablet, even though it was a same reference, some model had different hardware, sonlike you after testing multiple rom i had only touch s creen and no wifi ( wifi switch went back to off when i tried to turn it on) or on other rom, i had working wifi but no touch screen.
I hope they will replace your device...
Cheers

pierrottls31 said:
Im sorry to hear that, i dont think something is broken, i had the same issue with a memup tablet, even though it was a same reference, some model had different hardware, sonlike you after testing multiple rom i had only touch s creen and no wifi ( wifi switch went back to off when i tried to turn it on) or on other rom, i had working wifi but no touch screen.
I hope they will replace your device...
Cheers
Click to expand...
Click to collapse
Yep the wifi switch is exactly what i've got on this storex. Thanks for your help anyway. Ho and by the way, I properly rooted it with you first tuto
Cheers.

Fast custom ROM 4.2.2 by TOxico for Ezee tab 901
Guys,
I manage to find a very fast and usable rom for our tablet: (THanks to Toxico.) this rom will change your life.
All information and download are in the thread here:
http://forum.xda-developers.com/show...php?p=42274265
It should basically work on any A13 device with livesuit (tested on my Ezee tab 901 and on my 704CET mem up)
This rom comes with no TS driver, but there is all explanation and download to install the needed driver.
note: you might loose the camera though. I encourage you to read the full thread before going further and flash your tablet.
If you want to know the driver used on your tablet, run a adb shell and type lsmod (You will have a list of loaded/used driver.)
Dont be scared, everything is written in the toxico's thread
My only advice, if you dont know how to use adb, do not try it, this is not that easy.
I hope this will help.
Best regards.
As usual do it at your own risk and even more: make sure you have the original rom... just in case

Tutorial for 971.
Hi there,
Does anyone know a tutorial like this one but for the 971??
My brother-in-law wasn't using is so I'm thinking in tweaking it to see how it gets.

MaedaKeiji said:
Hi there,
Does anyone know a tutorial like this one but for the 971??
My brother-in-law wasn't using is so I'm thinking in tweaking it to see how it gets.
Click to expand...
Click to collapse
Hi, sorry i cant help you, it looks like the 971 is using a10 cpu, sôit can be different.
If you know what you are doing, u can try to backup your original firmware and test the solution i have provided from toxico in py post above. But there is no warranty it s going to work.
Any case, donnot forget google is your friend
Good luck

Unfornetly it seems google doens't like this tablet...
I'll see what I can do with some backups and all.
Thanks anyway!