Related
Stock EG30Plus Kernel for Epic Touch 4g compiled from source, properly.
Proper initramfs
su 3, superuser.apk, and busybox
ClockworkMod 5 (Compiled by bubby323)
Various Virtual Machine, Kernel and Network Tweaks I've been using in my plus kernels for quite some time...
Guess I should mention:
Bootanimation support, either bootanimation.zip or sanim.zip
init.d support
Remove Superuser.apk if its not version 3 before installing.
Odin the tar.md5 file
Immediately update profile
Me and bubby323 have spent quite a bit of time getting this recovery working correctly, and squaring away his kernel.
http://www.forums.acsyndicate.net/s...lus-Stock-Rooted-BusyBox-CWM5-and-Plus-Tweaks
Source:
https://github.com/chris41g/EG30Plus
Thanks to qbking77 for the how to video:
http://www.youtube.com/watch?v=kExN-Y2pfxA
Thanks to:
bubby323
Drockstar
Johncorleone
pyrostic
rjmjr69
nubecoder
thefredelement
first.
chris41g said:
Stock EG30Plus Kernel for Epic Touch 4g compiled from source, properly.
Proper initramfs
su 3, superuser.apk, and busybox
ClockworkMod 5 (Compiled by bubby323)
Various Virtual Machine, Kernel and Network Tweaks I've been using in my plus kernels for quite some time...
Remove Superuser.apk if its not version 3 before installing.
Odin the tar.md5 file
Immediately update profile
Me and bubby323 have spent quite a bit of time getting this recovery working correctly, and squaring away his kernel.
http://www.forums.acsyndicate.net/s...lus-Stock-Rooted-BusyBox-CWM5-and-Plus-Tweaks
Source:
https://github.com/chris41g/EG30Plus
Click to expand...
Click to collapse
sweet i will try it out
Thanks!
Question, what do you mean by immediately update profile? Sorry if thats a dumb question
Are you refering to the profile under system updates?
luigic81 said:
Thanks!
Question, what do you mean by immediately update profile? Sorry if thats a dumb question
Are you refering to the profile under system updates?
Click to expand...
Click to collapse
i think so
trying this kernel out now
expertzero1 said:
i think so
trying this kernel out now
Click to expand...
Click to collapse
yes, exactly..
i have full signal bars, AMAZING!
goes up and down from full bars, but wow nice, thanks!
Yes sir, Chris41g and I have spent the last 3 hours working on this stuff for you guys.
weird. this a bug?
Sent from my SPH-D710 using xda premium
Whoa snap, I've been waiting for this to test out with Rob's v2.0. Will see how it holds up to the stock deodexed I'm using right now.
is what a bug?
Will this give the damn triangle? By stock.. do you mean like the one pulled from a stock device?
by stock i mean compiled from source, and the triangle is just there until you load a custom bootanimation....
strongsteve said:
Will this give the damn triangle? By stock.. do you mean like the one pulled from a stock device?
Click to expand...
Click to collapse
If you are rooted you'll have the triangle, this kernel is for a rooted phone
chris41g said:
is what a bug?
Click to expand...
Click to collapse
shouldnt it be under kernal, not under build number?
no, kernel version is the linux kernel version... which is displayed correctly, though a bit strange looking. the build number is just provided traditionally by a rom, or kernel, or whatever...
You guys will really enjoy this kernel. CWM 5.0.2.3! Yes! Thanks for making this for us Chris. Also, thanks bubby and everyone who was involved
Sent from my SPH-D710 using xda premium
JohnCorleone said:
You guys will really enjoy this kernel. CWM 5.0.2.3! Yes! Thanks for making this for us Chris. Also, thanks bubby and everyone who was involved
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
+ 1 thanks guys!
I've used up all my thanks for the day on the 2 of you but thanks again. Been waiting on this.
Edit: Well I just flashed so haven't really got to test but my signal and down/upload speeds are WAY better!!!! Another thing I just noticed. I just got a news notification from Sprint Zone which is the first time I've ever gotten something from it since I've rooted.
I flashed this and then flashed back to stock (pulled) and now wifi will not connect.. how do I get back to stock (pulled) with working wifi?
Will be flashing this as soon as I get home.
Sent from my Epic 4G Touch.
Well, exactly what the title says. What do you guys think is the most stable kernel is with the best battery life out right now?
Pulled stock, LoSt kernel or stock with CWM. Go with a Shane or bubby kernel. The LoSt kernel has 2 versions. One has overclock
Sent from my SPH-D710 using xda premium
I had several Los's with Zedomax over clocked kernel. Sofar the stable Lost kernel has been great for me with zero Los. Stock also had zero Los on my phone.
Does the e4gt really need to be over clocked? It sure seems fast enough for me, especially if I turn off all animations. Turning off animation is just habbit I picked up from when I was running Android on the HTC Vogue, just got use to a utilitarian environment.
Well I would like to run loStkernel, but I never once got loStkernel until I did. I've had the phone since release.
Either lost kernel or the stock pulled and stock with cwm.
Sent From My Evo Killer!!!
Lostkernel
bluefire808 said:
Lostkernel
Click to expand...
Click to collapse
exp+
10char
Well I'm worried that once I flash any custom kernel that loS will start happening. Any input on this guys?
dcraig723 said:
Well I'm worried that once I flash any custom kernel that loS will start happening. Any input on this guys?
Click to expand...
Click to collapse
You can always go back to stock if all else fails
Def lostkernel, or bubby's stock with cwm. Ive had no problems with either. Running lostkernel exp and its good too
I didn't want to create new thread for new repack.
I guess we can keep couple of kernels in one thread.
For those of you who would like to run stock kernels with the builds
here are repacked FH13 and FH23 kernels with my recovery and some init.rc edits.
SD card read speed.
Custom boot animation support
init.d support
FH13
1. FH13_AGAT.zip flash in recovery.
2. FH13_AGAT.tar flash with ODIN or Mobile ODIN.
FH23
This repack comes with AGAT tREC_v0.2.2
1.FH23_AGAT.tar flash with ODIN or mobile ODIN Mirror
2. FH23_AGAT.zip flash in recovery. Mirror
I have tested this repack with my tFF18 rom and it works.
So far no problems.
Hope you guys will enjoy it.
Will this have the same features as ur FF18 kernel such as overclock?
Sent from my SPH-D710 using xda app-developers app
t4d73 said:
Will this have the same features as ur FF18 kernel such as overclock?
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
No.
It's a stock kernel with custom recovery and small edits in initramfs.
Some users prefer to use stock kernel with stock builds.
I made it just in case.
agat63 said:
No.
It's a stock kernel with custom recovery and small edits in initramfs.
Some users prefer to use stock kernel with stock builds.
I made it just in case.
Click to expand...
Click to collapse
Yeah but the custom kernel I have been using should work with that build as well right? Once we get it?
Sent from my SPH-D710 using xda app-developers app
t4d73 said:
Yeah but the custom kernel I have been using should work with that build as well right? Once we get it?
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
It should.
I don't see why it would not work with new build.
It's an ICS and it's 4.0.4. So there is no reason for custom kernel not to work with it.
agat63 said:
It should.
I don't see why it would not work with new build.
It's an ICS and it's 4.0.4. So there is no reason for custom kernel not to work with it.
Click to expand...
Click to collapse
Cool thanks.
Sent from my SPH-D710 using xda app-developers app
downloading
anyone running it?
donsh00tmesanta said:
downloading
anyone running it?
Click to expand...
Click to collapse
I'm running it for now for test purposes.
Over an hour now. So far nothing to report.
Typo on post.. you said FF13 instead of FH13
changlo said:
Typo on post.. you said FF13 instead of FH13
Click to expand...
Click to collapse
Yep.
You're right.
Fixed.
Thanks.
agat63 said:
No.
It's a stock kernel with custom recovery and small edits in initramfs.
Some users prefer to use stock kernel with stock builds.
I made it just in case.
Click to expand...
Click to collapse
Love having a stock kernel with recovery...Was using the the other stock kernel on here without the recovery on FF18 for about 4 or 5 hours tonight with no issues...I'm convinced that there's something wrong with that FF18 kernel...I've never had issues like on that kernel...I was back on EL29 for the past couple weeks...so far so good on this kernel...
I'm on rooted stock FF18 with this kernel now...no issues...I used the .tar - odin
thanks for making this!
jb
atlantadude1972 said:
Love having a stock kernel with recovery...Was using the the other stock kernel on here without the recovery on FF18 for about 4 or 5 hours tonight with no issues...I'm convinced that there's something wrong with that FF18 kernel...I've never had issues like on that kernel...I was back on EL29 for the past couple weeks...so far so good on this kernel...
thanks for making this!
jb
Click to expand...
Click to collapse
Glad you like it.
I knew there would be users who will go for stock kernel.
agat63 said:
I'm running it for now for test purposes.
Over an hour now. So far nothing to report.
Click to expand...
Click to collapse
hows battery life/smoothness?
donsh00tmesanta said:
hows battery life/smoothness?
Click to expand...
Click to collapse
Are you really asking about battery life after fresh flash and less than few hours use?
Lol damn AGAT when you coming over to the GSIII forum bro?
Not to sound like a douche but yes. I reboot twice after a fresh flash and charge to max. Then I use my phone like normal for an hr meaning screen is on and with 3g. At the end of one hr its usually sitting pretty at 80%. Sometimes 83 or sometimes 75 but that gives me an idea. I get about 10% drain per 30min on 3g with good signal thats my start point. This is how it was on gb and now on ics it has matched
Keep getting status 6 aborted when trying fo flash. Downloaded.zip three times
donsh00tmesanta said:
Not to sound like a douche but yes. I reboot twice after a fresh flash and charge to max. Then I use my phone like normal for an hr meaning screen is on and with 3g. At the end of one hr its usually sitting pretty at 80%. Sometimes 83 or sometimes 75 but that gives me an idea. I get about 10% drain per 30min on 3g with good signal thats my start point. This is how it was on gb and now on ics it has matched
Click to expand...
Click to collapse
Well in last 3 hours I did reboot my bout 6 times.
I was on this kernel little bit over an hour. Did some test. Run some programs.
Other than that when I'm home I'm on my laptop trying stuff. Phone is next to me for testing mostly.
My battery tests are running from time I go sleep (never put my phone on charge over night) till next day when I come home.
I know kernel is somewhat good if over night I'm loosing not more than 5-6% battery.
ntborg said:
Keep getting status 6 aborted when trying fo flash. Downloaded.zip three times
Click to expand...
Click to collapse
Let me check updater script.
May be I have a typo.
same here
I recently got a stock FH13 phone off a friend and I have it rooted. However once I rooted I found my 4g barely works on any from (10k/s). Running AOSP jb and flashed FI03 because i heard it would help but didnt. I'm coming off a ns4g where I can flash away and not worry. I tried searching here and on Google with nothing coming up. Any solutions? Thanks in advance
Sent from my SPH-D710 using Tapatalk 2
aman1127 said:
I recently got a stock FH13 phone off a friend and I have it rooted. However once I rooted I found my 4g barely works on any from (10k/s). Running AOSP jb and flashed FI03 because i heard it would help but didnt. I'm coming off a ns4g where I can flash away and not worry. I tried searching here and on Google with nothing coming up. Any solutions? Thanks in advance
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
If you are currently on aosp jb follow the instructions in the video and update profile and prl. If you get decent 4g in your area then you will get decent 4g on any rom that has 4g working.
https://www.youtube.com/watch?v=Rdx-kIxpitg
BluesRulez said:
If you are currently on aosp jb follow the instructions in the video and update profile and prl. If you get decent 4g in your area then you will get decent 4g on any rom that has 4g working.
https://www.youtube.com/watch?v=Rdx-kIxpitg
Click to expand...
Click to collapse
I'll let you know how it turns out. Thanks for the suggestion:good:
aman1127 said:
I recently got a stock FH13 phone off a friend and I have it rooted. However once I rooted I found my 4g barely works on any from (10k/s). Running AOSP jb and flashed FI03 because i heard it would help but didnt. I'm coming off a ns4g where I can flash away and not worry. I tried searching here and on Google with nothing coming up. Any solutions? Thanks in advance
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
Are you referring to FI03 modem? That will not help, this is sounds like the "ics 4g bug" that some people get (me included), there's no fix yet for aosp. You'll need to go to a FI03 based rom, or gingerbread.
What rom are you running? Do they include the radios or I dont have to do anything since I already have that modem flashed? I looked and I couldnt find any AOSP FI03 roms. All that are FI03 are touchwiz (blahhh)
aman1127 said:
What rom are you running? Do they include the radios or I dont have to do anything since I already have that modem flashed? I looked and I couldnt find any AOSP FI03 roms. All that are FI03 are touchwiz (blahhh)
Click to expand...
Click to collapse
I ended up going back to Calkulin's GB rom:
http://forum.xda-developers.com/showthread.php?t=1332837
with tdunham's 1.2 tweaks:
http://forum.xda-developers.com/showpost.php?p=27279574&postcount=10923
Modems are separate, and since you have FI03 modem already, you can leave that alone.
I also have Overstew's ICS theme:
http://forum.xda-developers.com/showthread.php?t=1322272
lewjay said:
I ended up going back to Calkulin's GB rom:
http://forum.xda-developers.com/showthread.php?t=1332837
with tdunham's 1.2 tweaks:
http://forum.xda-developers.com/showpost.php?p=27279574&postcount=10923
Modems are separate, and since you have FI03 modem already, you can leave that alone.
I also have Overstew's ICS theme:
http://forum.xda-developers.com/showthread.php?t=1322272
Click to expand...
Click to collapse
ooph Thats going to be tough for me. ICS is a huge leap forward from GB. What dictates the issue? I see some are flashing away with no problems
aman1127 said:
ooph Thats going to be tough for me. ICS is a huge leap forward from GB. What dictates the issue? I see some are flashing away with no problems
Click to expand...
Click to collapse
Search the forum for "wimax threshold" you'll see a few threads talking about the issue. The settings were changed in FI03 rom. If you want ICS, try the stock rooted here:
http://forum.xda-developers.com/showthread.php?t=1877041
lewjay said:
Search the forum for "wimax threshold" you'll see a few threads talking about the issue. The settings were changed in FI03 rom. If you want ICS, try the stock rooted here:
http://forum.xda-developers.com/showthread.php?t=1877041
Click to expand...
Click to collapse
Think I can restore back to that then go back to CM9 and the fix will stick? I read that some people had that work out. My phone is a refurb so maybe thats why its being so stubborn
aman1127 said:
Think I can restore back to that then go back to CM9 and the fix will stick? I read that some people had that work out. My phone is a refurb so maybe thats why its being so stubborn
Click to expand...
Click to collapse
Nah, once you switch to CM9 you'll lose the fix. The fix is part of the FI03 rom and maybe kernel. Just try out the rom, update profile and prl. If you still get bad 4G speed then it could be the area you're in or the phone itself.
Thanks a lot. I almost bricked it (odin stopped mid process because im on WIN8) but managed to recover. My 4g speeds picked up but are nowhere near my EVO 4g. It is usable now though so thanks a lot and I will experiment some more later :laugh:
Hey guys,
I tried to find a thread about my question, but couldn't find a convenient one.
How can I reset my LT18i to complete stock setup? Including ROM, Kernel and Baseband? Maybe unroot it too.
A further question as an alternative for me..
What is the best Kernel to use in CM7? I'm currently on 2.6.32.9-FXP, but games tend to lag, battery unloads very quick. I have to reload the battery at least every night.
Thanks in advice.
echo1991
echo1991 said:
Hey guys,
I tried to find a thread about my question, but couldn't find a convenient one.
Click to expand...
Click to collapse
Hi.
There are plenty out there - return xperia arc to stock
http://forum.xda-developers.com/showthread.php?p=35910775#post35910775
allright Thanks to that!
how about the CM7 Kernel?
echo1991 said:
allright Thanks to that!
how about the CM7 Kernel?
Click to expand...
Click to collapse
Pretty basic kernel. Nothing special.
Try Doomlord CM7 kernel instead!
Sent from my CM9 powered Samsung Galaxy S3
Destroyedbeauty said:
Try Doomlord CM7 kernel instead!
Click to expand...
Click to collapse
okay. I tried doomkernel v22 now, flashed it and installed the modules. but after rebooting the touchscreen doesn't work in CM7 and I got no service. however, the touchscreen works in bootloader/CWM
i'm using CM7 FXP130, baseband 72
I flashed the kernel via fastboot to replace the actual FXP kernel.
echo1991 said:
okay. I tried doomkernel v22 now, flashed it and installed the modules. but after rebooting the touchscreen doesn't work in CM7 and I got no service. however, the touchscreen works in bootloader/CWM
i'm using CM7 FXP130, baseband 72
I flashed the kernel via fastboot to replace the actual FXP kernel.
Click to expand...
Click to collapse
1. You can't use Doomlords Gingerbread kernel on CM7! This one is the correct one -> Doomlord CM7-kernel
2. And baseband 72 is not for 2.3.x based ROMs..
Destroyedbeauty said:
1. You can't use Doomlords Gingerbread kernel on CM7! This one is the correct one -> Doomlord CM7-kernel
2. And baseband 72 is not for 2.3.x based ROMs..
Click to expand...
Click to collapse
okay i'll try that one.
which baseband is the right one? do you recommend one? though baseband 72 actually works =/
echo1991 said:
okay i'll try that one.
which baseband is the right one? do you recommend one? though baseband 72 actually works =/
Click to expand...
Click to collapse
For CM7.2 - baseband 36 with corresponding libs is the ****.
Sent from my CM9 powered Samsung Galaxy S3
thanks! works so far. I'll have a look at my battery if something changed.
everything works fine
thanks!
echo1991 said:
thanks! works so far. I'll have a look at my battery if something changed.
everything works fine
thanks!
Click to expand...
Click to collapse
Trust me, it will change
Sent from my CM9 powered Samsung Galaxy S3