[Q] Back to complete STOCK / best CM7 Kernel? - Xperia Arc Q&A, Help & Troubleshooting

Hey guys,
I tried to find a thread about my question, but couldn't find a convenient one.
How can I reset my LT18i to complete stock setup? Including ROM, Kernel and Baseband? Maybe unroot it too.
A further question as an alternative for me..
What is the best Kernel to use in CM7? I'm currently on 2.6.32.9-FXP, but games tend to lag, battery unloads very quick. I have to reload the battery at least every night.
Thanks in advice.
echo1991

echo1991 said:
Hey guys,
I tried to find a thread about my question, but couldn't find a convenient one.
Click to expand...
Click to collapse
Hi.
There are plenty out there - return xperia arc to stock
http://forum.xda-developers.com/showthread.php?p=35910775#post35910775

allright Thanks to that!
how about the CM7 Kernel?

echo1991 said:
allright Thanks to that!
how about the CM7 Kernel?
Click to expand...
Click to collapse
Pretty basic kernel. Nothing special.
Try Doomlord CM7 kernel instead!
Sent from my CM9 powered Samsung Galaxy S3

Destroyedbeauty said:
Try Doomlord CM7 kernel instead!
Click to expand...
Click to collapse
okay. I tried doomkernel v22 now, flashed it and installed the modules. but after rebooting the touchscreen doesn't work in CM7 and I got no service. however, the touchscreen works in bootloader/CWM
i'm using CM7 FXP130, baseband 72
I flashed the kernel via fastboot to replace the actual FXP kernel.

echo1991 said:
okay. I tried doomkernel v22 now, flashed it and installed the modules. but after rebooting the touchscreen doesn't work in CM7 and I got no service. however, the touchscreen works in bootloader/CWM
i'm using CM7 FXP130, baseband 72
I flashed the kernel via fastboot to replace the actual FXP kernel.
Click to expand...
Click to collapse
1. You can't use Doomlords Gingerbread kernel on CM7! This one is the correct one -> Doomlord CM7-kernel
2. And baseband 72 is not for 2.3.x based ROMs..

Destroyedbeauty said:
1. You can't use Doomlords Gingerbread kernel on CM7! This one is the correct one -> Doomlord CM7-kernel
2. And baseband 72 is not for 2.3.x based ROMs..
Click to expand...
Click to collapse
okay i'll try that one.
which baseband is the right one? do you recommend one? though baseband 72 actually works =/

echo1991 said:
okay i'll try that one.
which baseband is the right one? do you recommend one? though baseband 72 actually works =/
Click to expand...
Click to collapse
For CM7.2 - baseband 36 with corresponding libs is the ****.
Sent from my CM9 powered Samsung Galaxy S3

thanks! works so far. I'll have a look at my battery if something changed.
everything works fine
thanks!

echo1991 said:
thanks! works so far. I'll have a look at my battery if something changed.
everything works fine
thanks!
Click to expand...
Click to collapse
Trust me, it will change
Sent from my CM9 powered Samsung Galaxy S3

Related

[Kernel] Overlock 1.65ghz - Froyo Stock Sense Only

Source: (bwahahha no github)
http://dl.dropbox.com/u/8699733/vivo...35-crc.tar.bz2
froyo only
Kernel:
http://dl.dropbox.com/u/8699733/vivow/vivow.1.65.zip
Only changes are to acpulock-7x30.c , no additional credits/copyrights were in the header of the one I worked off of. If you had a hand it it, let me know so we both can fix that.
Since this isnt even available for everybody yet, is it stable at 1.65ghz?
Sent from my ADR6350 using XDA App
wyattyoss said:
Since this isnt even available for everybody yet, is it stable at 1.65ghz?
Sent from my ADR6350 using XDA App
Click to expand...
Click to collapse
I've tested it. Stable for me, and battery is still pretty damn good with it.
I've tried to flash this kernel on 2 different sens roms and got a bootloop on both am i doing something wrong, i tried it on the [ROM] Incredible 2 / HTC s710d 2.3.3 ROM based on Incredible S - Beta2 and RMK Gingerbread Sense r1 :: 2.18.605.3 (Rooted/Deodexed/Debloated). Am i doing something wrong??
scumfromohio said:
I've tried to flash this kernel on 2 different sens roms and got a bootloop on both am i doing something wrong, i tried it on the [ROM] Incredible 2 / HTC s710d 2.3.3 ROM based on Incredible S - Beta2 and RMK Gingerbread Sense r1 :: 2.18.605.3 (Rooted/Deodexed/Debloated). Am i doing something wrong??
Click to expand...
Click to collapse
I have the same problem. I think this kernal is only for the stock froyo rom.
TB13 said:
I have the same problem. I think this kernal is only for the stock froyo rom.
Click to expand...
Click to collapse
Ahh gotcha that would explain it..
Source link not working.
blazingwolf said:
Source link not working.
Click to expand...
Click to collapse
Same problem . Source link is down . whose have also test it ? which rom are using before flashing the kernel ?
Sorry for my bad english
Drob box links never work for me idk why... Will this kernel give me anything close to the quadrant score I revived with CM7? It was over 2k I just can't stand not having my sense UI
InkedRoughNeck said:
Drob box links never work for me idk why... Will this kernel give me anything close to the quadrant score I revived with CM7? It was over 2k I just can't stand not having my sense UI
Click to expand...
Click to collapse
You will be able to get higher than 2000 with this kernal easily. The thing is though, I don't think you can flash back to froyo after going to GB, or atleast I can't.
this is for GB? Wish it would of stated it in the op. Where can I find a Oc kernel for froyo with this kind of potential?
InkedRoughNeck said:
this is for GB? Wish it would of stated it in the op. Where can I find a Oc kernel for froyo with this kind of potential?
Click to expand...
Click to collapse
No this is for the stock Froyo rom. The thing is, in my case at least, I cannot go back to froyo after flashing CM7.
TB13 said:
No this is for the stock Froyo rom. The thing is, in my case at least, I cannot go back to froyo after flashing CM7.
Click to expand...
Click to collapse
Ahhh ****!!!! I flashed Cm7 as well. What would happen if someone were to flash this then after Cm7? I backed up all my stuff and that's how I got back to froyo, so am ibstill good to flash?
InkedRoughNeck said:
Ahhh ****!!!! I flashed Cm7 as well. What would happen if someone were to flash this then after Cm7? I backed up all my stuff and that's how I got back to froyo, so am ibstill good to flash?
Click to expand...
Click to collapse
jcase seems to have a kernel for cm7 also. Says 1.8GHz for that one.
http://rootzwiki.com/showthread.php?1123-Kernel-1.8ghz-for-Cyanogenmod7
InkedRoughNeck said:
Ahhh ****!!!! I flashed Cm7 as well. What would happen if someone were to flash this then after Cm7? I backed up all my stuff and that's how I got back to froyo, so am ibstill good to flash?
Click to expand...
Click to collapse
For me, I get the white HTC screen and nothing else. If you have your stuff backed up, try it, see if you have the same problem.
blazingwolf said:
jcase seems to have a kernel for cm7 also. Says 1.8GHz for that one.
http://rootzwiki.com/showthread.php?1123-Kernel-1.8ghz-for-Cyanogenmod7
Click to expand...
Click to collapse
Will this work with a stock rom?
I doubt it. It is made specifically for CM7.
He forgot to mention it .
TB13 said:
You will be able to get higher than 2000 with this kernal easily. The thing is though, I don't think you can flash back to froyo after going to GB, or atleast I can't.
Click to expand...
Click to collapse
Were u backed up stock rom via cwm? I'm getting ready to flash but if u did the same I don't wanwantto risk it. Sorry for all the questions
InkedRoughNeck said:
Were u backed up stock rom via cwm? I'm getting ready to flash but if u did the same I don't wanwantto risk it. Sorry for all the questions
Click to expand...
Click to collapse
I didn't back up the stock rom. If it messes up just remove the battery, go into recovery, flash back to what you were using before.

Most stable/updated rom on 2.3.4?

Using Aokplay ROM ICS for a few days and while I like it,the battery drains quickly and most games don't work.
Planning on switching back to GB (last rom was TEAM Stock) was using a locked bootloader then but now it is unlocked,what are some good ROMs to use?
Thanks for the help
GetPatriotized said:
Using Aokplay ROM ICS for a few days and while I like it,the battery drains quickly and most games don't work.
Planning on switching back to GB (last rom was TEAM Stock) was using a locked bootloader then but now it is unlocked,what are some good ROMs to use?
Thanks for the help
Click to expand...
Click to collapse
I think u should try joka rom maybe it would not drains your battery so fast, now im trying to change to that rom but could make it,
You could always give CM7 a try.
GetPatriotized said:
Using Aokplay ROM ICS for a few days and while I like it,the battery drains quickly and most games don't work.
Planning on switching back to GB (last rom was TEAM Stock) was using a locked bootloader then but now it is unlocked,what are some good ROMs to use?
Thanks for the help
Click to expand...
Click to collapse
use this one with doomkernel
http://forum.xda-developers.com/showthread.php?t=1595058
ezadsyafiq99 said:
use this one with doomkernel
http://forum.xda-developers.com/showthread.php?t=1595058
Click to expand...
Click to collapse
2.3.7? I was on 2.3.4 on my last ROM (Rogers UK Generic)
GetPatriotized said:
2.3.7? I was on 2.3.4 on my last ROM (Rogers UK Generic)
Click to expand...
Click to collapse
All gingerbread roms are stock 2.3.4 with the developers theme and a few tweaks/scripts already installed. Most roms won't affect battery life, what you need to do is install a custom kernel i.e. doomlords which will give you a performance and battery boost.
EDIT- Also some apps may have been added/removed.
Nabeel_Nabs said:
All gingerbread roms are stock 2.3.4 with the developers theme and a few tweaks/scripts already installed. Most roms won't affect battery life, what you need to do is install a custom kernel i.e. doomlords which will give you a performance and battery boost.
Click to expand...
Click to collapse
Ah I get it. Where can I get the boot.img for Doomloads kernel?
GetPatriotized said:
Ah I get it. Where can I get the boot.img for Doomloads kernel?
Click to expand...
Click to collapse
In this thread: http://forum.xda-developers.com/showthread.php?t=1176502
build #3003 is the best atm:
http://icxperia.com/doomlord/play/dk-13/PLAY-GSM-DooMKernel-v13-3013_boot.img
Spent a couple days on TrueAncestor and it's fine but the battery life drains a little bit than stock
I liked JokaWild 3.0 with DoomKernal 3013.

How Do I Download The DoomKernel ???

First, I know I know how to download kernels.
- CyanogenMod exclusive kernel (CM7,CM9,CM10)
- LuPus kernel (GB,JB)
And I flashed kinds of kernel like above.
But.. I don't know the way to download DommKernel.
I use AtomicRom GB.
Actually, JB Roms had clumsy perfomances...
So, I went back 4.0.2.A.0.79 rom.
But how??
It had too...
So I was looking for new GB Roms.
And I was recommended the AtomicRom.
It's really really really GOOOOOOOD!!!!!
As a matter of fact... I didn't watch perfomences.
The Theme & Launcher & Lockscreen were wonderful. (for just me...)
By the way, I flashed Atomic Rom GB with LuPus GB kernel.
LuPus kernel has huge probelm....
It can't turn of WiFi.
Clearly it is existent to fix it,
but I just flash DoomKernel.
Because I was recommended it with Atomic Rom.
And so I found thread about the DoomKernel.
But how..?
I could download WiFi module.
But actually I can't DoomKernel file.
The link in the thread is connected odd site?
I think the site like Mediafire,zippyshare,******* or 4shared ..?
But there is Contact Support?
I don't know how to download the DoomKernel.
Please help me.
doomkernel is already old. N the link already missing. if u need i can upload it for you.
Thanks
HEZAiKU said:
doomkernel is already old. N the link already missing. if u need i can upload it for you.
Click to expand...
Click to collapse
Oh, I see.
Well... Then Can you recommend kernel with Atomic GB ?
Or please upload the file.
Thanks.:good:
Jaehyeok Koo said:
Oh, I see.
Well... Then Can you recommend kernel with Atomic GB ?
Or please upload the file.
Thanks.:good:
Click to expand...
Click to collapse
lupus gbv7
http://www.mediafire.com/?4uputob2an2701c
HEZAiKU said:
http://www.mediafire.com/?4uputob2an2701c
Click to expand...
Click to collapse
Thanks :highfive:
HEZAiKU said:
doomkernel is already old. N the link already missing. if u need i can upload it for you.
Click to expand...
Click to collapse
if you have doom kernel v2 cdma I wood greatly appreciate it if you shared.
Sent from my R800x using xda app-developers app
fritzbored said:
lupus gbv7
Click to expand...
Click to collapse
+1 The latest version of this kernel performs much better
jeremytn86 said:
if you have doom kernel v2 cdma I wood greatly appreciate it if you shared.
Sent from my R800x using xda app-developers app
Click to expand...
Click to collapse
I kept seeing u snooping around the CDMA r800x forum. I did have a r800x but i sold it and deleted all the necessary files especially doomkernel. Sorry I couldn't help you. When it comes to development the international r800i or r800a is always better.

[Q] Ultimate kernel :D

As new comer, so this stupid? question comes to general
Is it possible to make ultimate kernel that work on any ROM stage???
(GB, ICS, CM 10.1)
I mean that we can switch easilly between all ROM in SD card
Lupus has done with it, but miss CM10.1 one :silly:
goodness4411 said:
As new comer, so this stupid? question comes to general
Is it possible to make ultimate kernel that work on any ROM stage???
(GB, ICS, CM 10.1)
I mean that we can switch easilly between all ROM in SD card
Lupus has done with it, but miss CM10.1 one :silly:
Click to expand...
Click to collapse
No, it is not.
nAa kernel works on CM10;CM10.1, and should also on CM9
http://forum.xda-developers.com/showthread.php?t=2273011
Try including the ramdisks of each android version by extracting boot.imgs and then try. But the process is really hard and u may also need to prepare a new zImage...
Cheers,
AJ
alokbina is now Abhinav2
Someguyfromhell said:
No, it is not.
Click to expand...
Click to collapse
OK, maybe not for now
NedasPekorius said:
nAa kernel works on CM10;CM10.1, and should also on CM9
http://forum.xda-developers.com/showthread.php?t=2273011
Click to expand...
Click to collapse
Actually i really want to have easy switch only between ICS and JB (ICS for all working functions and JB for advance exp)
Abhinav2 said:
Try including the ramdisks of each android version by extracting boot.imgs and then try. But the process is really hard and u may also need to prepare a new zImage...
Cheers,
AJ
alokbina is now Abhinav2
Click to expand...
Click to collapse
Thanks for possibility ...
Noted... but still far maybe for trial.. i'm still zero point bla bla in android...
Someguyfromhell said:
No, it is not.
Click to expand...
Click to collapse
Itcan be done but with various patches in ramdisk (but not everything woring 100%). I had a kernel on my PLAY for GB ICS and JB but compared to say a GB specific kernel or ICS specific kernel performance decreased.
So to anwser the OP's question. Yes its possible but using a specific kernel for that specific android is much better.
wedgess said:
Itcan be done but with various patches in ramdisk (but not everything woring 100%). I had a kernel on my PLAY for GB ICS and JB but compared to say a GB specific kernel or ICS specific kernel performance decreased.
So to anwser the OP's question. Yes its possible but using a specific kernel for that specific android is much better.
Click to expand...
Click to collapse
Can you make a kernel that runs stock ICS and cm10 job at least.. You did this type of kernels for us lupus jb that runs cm10 & 10.1 and lupus GB & ICS kernel ... Just requesting it would be better to have such working kernel
Sent from my NEO V using xda premium
deccen90 said:
Can you make a kernel that runs stock ICS and cm10 job at least.. You did this type of kernels for us lupus jb that runs cm10 & 10.1 and lupus GB & ICS kernel ... Just requesting it would be better to have such working kernel
Sent from my NEO V using xda premium
Click to expand...
Click to collapse
I could but WiFi wont work and not sure about anything else. I will not attempt to do anything like this without a mogami device without owning one. I was meant to be getting one soon but donator moved to a new device and unfortunately sold his old device to family member instead
Hard to hear those words but I'm happy with your kernels... Without owning mogami device you did tremendous job for us .. hands off

Kernel 2in1 [ICS/GB]

Hey guyz, is there any kernel which works for both ics and gb.
There was a lupus version long time ago, but I don't remember the version. If any body know please post here.
Thanks
If I remember correctly, newest ICS Lupus (v15 or v16) can boot both ICS and GB.
Someguyfromhell said:
If I remember correctly, newest ICS Lupus (v15 or v16) can boot both ICS and GB.
Click to expand...
Click to collapse
If you can confirm? Please, TIA
I don't have the phone at hand right now, being used as temporary backup phone by a relative.
Just try it yourself. You can't really mess up anything. ICS boots definitely on that kernel, GB should, but if it doesn't, you can just flash another kernel/ROM or even stock firmware.
Someguyfromhell said:
I don't have the phone at hand right now, being used as temporary backup phone by a relative.
Just try it yourself. You can't really mess up anything. ICS boots definitely on that kernel, GB should, but if it doesn't, you can just flash another kernel/ROM or even stock firmware.
Click to expand...
Click to collapse
The thing is m not having PC availability, I have to request to my faculty for system access but only for 5-10 mins. So I can't test in that time, cause I can't stay to ics cause of its performance for long time. otherwise I wouldn't have posted this thread if I had PC.
Btw thanks mate.
Sent from my Xperia Arc S using XDA Premium 4 mobile app
DeathStroke said:
Hey guyz, is there any kernel which works for both ics and gb.
There was a lupus version long time ago, but I don't remember the version. If any body know please post here.
Thanks
Click to expand...
Click to collapse
Seems to be lupus v14. In the sticky thread for roms/root/kernels/mods etc. in arc development section (post 3, gb kernels) it's mentioned. I looked into lupus thread and in the changelog for older releases you see v14 that should boot up on ics, cm9 and gb. But I didn't test it myself :angel:
Cheers!
Lupus is ics+gb kernel (latest version) u can use both of the firmware and its based roms with this kernel.[emoji3]
So i confirm here that lupus is two in one kernel. Thanks for your response guys.
Sent from my LT18i using XDA Premium 4 mobile app

Categories

Resources