the phone does not boot up . when i power on, a screen saying :
odin mode
product name: t989
custom binary download: no
current binary: samsung official
(mobile)--!--(PC)
"Firmware upgrade ecountered an issue. please select recovery mode in Kies & try again.".
I have tried to connecting it to kies but its not recognzied. any suggestions?
Odin stock
jangst123 said:
Odin the ROM below.
If you still can not get it to boot, Odin the Kernel
[STOCK] T-Mobile Samsung Galaxy S II Stock Kernel // UVKID
Originally Posted By: bubby323
and
[ROM] SGH-T989 // UVKID // Stock // Deodexed // Rooted //Busybox
Click to expand...
Click to collapse
Sent from my SGH-T989 using xda premium
mickeycobra04 said:
the phone does not boot up . when i power on, a screen saying :
odin mode
product name: t989
custom binary download: no
current binary: samsung official
(mobile)--!--(PC)
"Firmware upgrade ecountered an issue. please select recovery mode in Kies & try again.".
I have tried to connecting it to kies but its not recognzied. any suggestions?
Click to expand...
Click to collapse
Sent from my SGH-T989 using xda premium
how can i get odin to read my device if my device is stuck in the screen mentioned and when i enter download mode through usb connecting, takes me to the warning screen!! but when i press volume up it doesnt go into the next step, it goes straight to the same screen that i mentioned. thanks for replying btw, your the only person thats helped me out since i started searching for help.
Did you try the button combo to get into download/odin mode? If so you need to get a usb jig to force it into download mode so you can flash back to stock via odin
Sent from my SGH-T989 using xda premium
Same thing happened to me. Just have Odin open and ready to go, plug phone into DL mode just like normal, when the screen pops up give Odin a second or two and then you should see the com light up yellow as Odin recognise your device. Start the flash and let Odin do it's thing and it will reboot and all will be fine.
quest4fire said:
Did you try the button combo to get into download/odin mode? If so you need to get a usb jig to force it into download mode so you can flash back to stock via odin
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
i can get into download mode by plugging usb while holding the vol up/vol down. but when it asks me to press vol up, it takes me to the same screen with "phone-!-PC".
wannagofast said:
Same thing happened to me. Just have Odin open and ready to go, plug phone into DL mode just like normal, when the screen pops up give Odin a second or two and then you should see the com light up yellow as Odin recognise your device. Start the flash and let Odin do it's thing and it will reboot and all will be fine.
Click to expand...
Click to collapse
Ok, just tried this method, when i get into download mode i click vol up and continues to the screen im stuck on. odin still didnt recognize my phone
me 2
im having the same issue with my phone. i googled around it saw ppl with the same issue, but when ppl fix their problem they didnt say how. i left a post on 3 of the threads (including 1 not on xda) but i havent received a response. i tried the hold the buttons method, the delete kies method, the just let odin flash a rom over but when odin gets to "cashe" it fails everytime. i hope i can find a fix, cuz ppl are having this problem and fixing there phone pretty quickly.
did u reinstall the drivers just asking
kdog808 said:
did u reinstall the drivers just asking
Click to expand...
Click to collapse
yeah, i re-installed the samsung kies drivers and deleted running apps in task manager. i also re-installed phone drivers to my cpu. and i re-installed odin to the cpu and restarted the cpu after each method. nothing worked!!! i also tried holding the vol+home+power button, but the error message just pops up.
Yeah my phone is soft bricked I really need to get into download mode without this annoying message
Trevnerdio said:
Yeah my phone is soft bricked I really need to get into download mode without this annoying message
Click to expand...
Click to collapse
Try the second link in the second post. It worked for me. The post with the headline Odin Mode
if your screen has a pc and a warning symbol you still can odin,
open oding and conect your phone to pc while that screen you are saying pops up then see if odin recognizes..
darocsfinest1 said:
Try the second link in the second post. It worked for me. The post with the headline Odin Mode
Click to expand...
Click to collapse
I already did that plus everything else possible :\
Trevnerdio said:
I already did that plus everything else possible :\
Click to expand...
Click to collapse
have you tried reinstalling kies, try it thats what i did. i was in the same screen, it was never read by odin until i did exactly that.
mickeycobra04 said:
have you tried reinstalling kies, try it thats what i did. i was in the same screen, it was never read by odin until i did exactly that.
Click to expand...
Click to collapse
My device is read by Odin and it flashes things. Once I flash a working rom though, it bootloops and I have no recovery to wipe data. I've never been able to get the repartition function to work
And the error I keep receiving every time almost is an error about line 1876. I have no idea what this is. I Googled it and I can't find it.
FWIW My phone would not go into download mode to save my life. I then decided to try the OE Samsung cable instead of the motorola cable I had been using and it worked right away.
Troubleshooting 101, start with the basics.
So I have the same problem as the OP. The only screen I boot to is mobile ! PC in Odin mode. This happened after I was rooted with my stock rom and CWM, but tried to do the OTA update from Kies.
My device is recognized by Odin utility, so I tried what the 2nd poster put and used Odin to flash the stock kernel (UVKID tar) from the PDA button and it failed. I used the default settings in Odin, but maybe I didn't set one right? I have attached a screen shot.
So now do I use Odin to flash the stock recovery? I'm working on making a USB jig in case that will help.
UPDATE: I was able to use Odin to flash the Stock Recovery. Now it boots up like normal. I would like to try the OTA update through Kies again, but I'm worried. Any suggestions?
Kies Firmware Emergency Recovery
mickeycobra04 said:
the phone does not boot up . when i power on, a screen saying :
odin mode
product name: t989
custom binary download: no
current binary: samsung official
(mobile)--!--(PC)
"Firmware upgrade ecountered an issue. please select recovery mode in Kies & try again.".
I have tried to connecting it to kies but its not recognzied. any suggestions?
Click to expand...
Click to collapse
OK the somewhat hidden Firmware Recovery built into Kies is not to hard to find,
First you will need to write on a piece of paper your S/N and your Model #, the same way it is written under the battery on the sticker.
Second boot your phone into download mode and connect it to the computer.
Third open Kies, select the tools drop down menu.
Now you have a choice. Select Firmware Emergency Recovery to recover your current firmware version... or select Firmware Upgrade and Initialization to install the latest OTA, either way just fallow the steps on screen and when done your will have a working phone.
hit the thanks button if this helped
Bro you should check the dates out xD thx anyway though
Sent from my SGH-T989 using xda premium
Related
OK I was trying to flash an unlocked kernal via ODIN last night, something went wrong and now phone is stuck on the phone--!--computer screen. I cannot get past this screen. vol+home+power doesn't do anything but loop to the same screen.
It shows ODIN MODE in red at the top of the screen, but ODIn won't recognize the phone, nor will Kies (not running at the same time). Computer makes USB connected/disconnected sound when I plug and unplug the phone.
I have tried One-Click Unbrick, did not recognize that phone was connected.
Help!!
which model of Galaxy S2 do you have?
T-Mobile SGH-T989
hose902 said:
T-Mobile SGH-T989
Click to expand...
Click to collapse
there''s currently nothing to flash this phone
it came out only 2 days ago
DEV are still working on finding root
so, the best suggestion is to take it back to the store and get it exchanged
or wait a few more days/weeks until a flashable release becomes available to fix the mistake
I know, I was hasty and now this. Even when there something available to flash, the device isn't being recognized by ODIN. Any troubleshooting help for this?
When I managed to get my Vibrant into that mode I could pull the battery, hold volume up, put the battery in, press and release power (still holding volume up) and it'd kick back into download mode everytime. Once in download mode I could plug the USB in and a running ODIN would see it pop up. If ODIN wasn't running and USB was already plugged in things wouldn't work right.
I haven't tried ODIN on the GS2 yet (I'll wait for a root ). I did find the vibrant nearly impossible to brick though... trust me I unexpectedly tried quite hard.
You might need the newest ODIN for GS2 support, and possibly newer drivers.
Hey, Hey, Hey...
My Story...
1. I got a TMO Samsung Galaxy S2
2. Tried to root
3. Used Odin to root and install ROM and referenced the following thread: http://forum.xda-developers.com/showthread.php?t=1095274
4. Realized phone models are not the same
5. Phone does not boot and nothing comes up on the screen
6. No lights or LED indicators (i.e. charging) HOWEVER....
7. ODIN recognizes the phone when I plug in the phone via USB
8. Tried to load stock rom:http://forum.xda-developers.com/showthread.php?t=1321811
9. ODIN gets stuck on <ID:0/005> SetupConnection...
10. I am unable to access SD Card for CWR
11. Next step? Return or exchanges are currently not an option.
Thanks in advance for the assistance!
fix4tv said:
Hey, Hey, Hey...
My Story...
1. I got a TMO Samsung Galaxy S2
2. Tried to root
3. Used Odin to root and install ROM and referenced the following thread: http://forum.xda-developers.com/showthread.php?t=1095274
4. Realized phone models are not the same
5. Phone does not boot and nothing comes up on the screen
6. No lights or LED indicators (i.e. charging) HOWEVER....
7. ODIN recognizes the phone when I plug in the phone via USB
8. Tried to load stock rom:http://forum.xda-developers.com/showthread.php?t=1321811
9. ODIN gets stuck on <ID:0/005> SetupConnection...
10. I am unable to access SD Card for CWR
11. Next step? Return or exchanges are currently not an option.
Thanks in advance for the assistance!
Click to expand...
Click to collapse
I'm a bit new to this, but a custom ROM shouldn't affect your recovery mode. Are you sure you are using the correct buttons and methods to boot recovery?
Might want to make a new thread instead of necroing something from when the phone was 2 days old.
I have GT I9100 and done the same thing and got the same result . stuck at setup connection with odin
Please Help
Go into device manager when is plugged in and if it says qhd-usb or something like that its a hard brick. What tipped me off was you said it makes two noises when you plug in. that's a tell tell sign your hard bricked
Sent from my SGH-T989 using xda premium
soft bricked my phone (i hope)
i have sgh-t989 (t-mobile) i am running a miui rom. it wont boot it just goes to miui boot up screen. i can go to the download mode but not recovery (how do u do that) but when im in downoad mode Odin dosnt recognize my phone. and my computer says it is an unknown device.
tried new wire, uninstalling re-installing kies, stopped all processes, diff computer tried to boot for a day, let battery out for a day, and a few other things.
please help and thank you.
iamnoone626 said:
i have sgh-t989 (t-mobile) i am running a miui rom. it wont boot it just goes to miui boot up screen. i can go to the download mode but not recovery (how do u do that) but when im in downoad mode Odin dosnt recognize my phone. and my computer says it is an unknown device.
tried new wire, uninstalling re-installing kies, stopped all processes, diff computer tried to boot for a day, let battery out for a day, and a few other things.
please help and thank you.
Click to expand...
Click to collapse
You should try to uninstall then reinstall driver, and try another usb port. In my experience, Odin seems to be picky, it only recognizes your phone if you plug it in the usb port that you used in the first time.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Recovery is accessed by holding both vol + and - while starting the phone. Hold them both while pressing the power button, then release the power button when it vibrates, keep holding the vol buttons till you see the recovery screen.
Alarmmy said:
You should try to uninstall then reinstall driver, and try another usb port. In my experience, Odin seems to be picky, it only recognizes your phone if you plug it in the usb port that you used in the first time.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
ok i have done this through kies is there another way that you can do this?
---------- Post added at 09:34 AM ---------- Previous post was at 09:26 AM ----------
nagoshi said:
Recovery is accessed by holding both vol + and - while starting the phone. Hold them both while pressing the power button, then release the power button when it vibrates, keep holding the vol buttons till you see the recovery screen.
Click to expand...
Click to collapse
when i do this it only takes me to download mode.
Have a look at http://forum.xda-developers.com/showthread.php?t=1513359
for a DL link for the USB Drivers
Cheers,
Chris
Sk3tchy said:
Have a look at http://forum.xda-developers.com/showthread.php?t=1513359
for a DL link for the USB Drivers
Cheers,
Chris
Click to expand...
Click to collapse
i tryed this but still odin does not recognize my phone. (no yellow box shows up)
Yes, i'm a total noob, sorry everyone. I tried to root my T Mobile Galaxy S2 using the Kies/Odin method, and now i'm getting nothing but a screen that says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". I would happily follow those directions, but now Kies won't recognize my device?!?!? I also can not get back into download mode. I have no idea what to do. Is there anyone out there that can help?
Can you still turn your phone on and use it?
Sent from my SGH-T989 using XDA App
He can not use the phone
Sent from my ADR6400L using Tapatalk
Hey I was wondering if u can help my friend out it seems like u were trying to be nice but here's his story he was trying to root his phone I don't know what method but it dud require Odin and some file called Hercules witch I think is cwm but I don't know were he went wrong but now when he tries to boot up it takes him to a black screen that says in red writing Odin mode..product name sgh t898, custom binary: no , current binary Samsung official and below all that there is a phone and yellow warning symbol with it saying firmware upgrade encounter an issue. Please select recovery in kies and try again
Sent from my ADR6400L using Tapatalk
my ADR6400L using Tapatalk
This is what he gets is anyone willing to help
Sent from my ADR6400L using Tapatalk
All you need to do is flash it using Odin. Grab the stock rom from the general forum of the galaxy s2 and flash it using Odin.
Sent from my SGH-T989 using Tapatalk
Did/does Odin recognize the phone? If it does then go ahead and flash the stock Odin firmware package and that should take care of the problem. Same thing happenend to me and all you need to do is set everything up just like normal, go into DL mode and give Odin a few seconds to find a com port and hit start...just pretend the warning is not there.
I have the same thing ...
I was doing a stock upgrade through Kies, and my computer decided to be dumb and install a windows update and restart the computer... I now see the same thing, i had the stock rom, but it was rooted, and when I try to go back in Odin, it never recognizes the phone... Kies won't recognize the phone, neither will Odin... Am I just returning this phone or what?
EDIT: Nevermind, I only bought it 2 days ago, so I just exchanged the phone
Yes, you can flash from that screen -- I managed to brick my Vibrant that way a number of times, and as long as you get that screen (or the Android digging screen) it's recoverable. KIES should be able to recover it as should Odin -- if it DOESN'T work turn OFF the computer (all the way off) and restart it then try again.
Samsung's USB drivers have a habit of getting confused and causing flash failures both in KIES and Odin.
Be aware that if you're trying to use KIES and the "latest" firmware is a non-wipe firmware (as the updates from T-Mobile are) it will happily load onto the phone something that will bootloop into the stock recovery and refuse to start! If you get hosed like this you probably need to Odin back to the ORIGINAL firmware so you get a "full" flash, then use KIES (or ODIN) again to perform the update.
UntamedDeviance said:
I have the same thing ...
I was doing a stock upgrade through Kies, and my computer decided to be dumb and install a windows update and restart the computer... I now see the same thing, i had the stock rom, but it was rooted, and when I try to go back in Odin, it never recognizes the phone... Kies won't recognize the phone, neither will Odin... Am I just returning this phone or what?
EDIT: Nevermind, I only bought it 2 days ago, so I just exchanged the phone
Click to expand...
Click to collapse
Were you able to exchange your device? And if you did, what did the T-Mobile reps ask you? and what did you tell them? I ran into the very same problem. I tried everything but I'm still stuck on that screen. I don't want T-Mobile to think I purposely did something to make the phone that way.
Hope I'm not too late to help: I had same problem and used odin to fix.
Here's what I did:
Download stock kernel in tar form from the Android devel forum. Start odin, click check box in PDA, click PDA button then select the kernel you just downloaded.
Insert usb into your phone (I left my cord connected to my computer). Start phone in download mode (up+down keys). Once it's started ib DL mode, unplug the usb cord, then after just a few moments plug it in again. If necessary, let it set a few moments until Odin recognizes the device (yellow stripe in id:com to the upper left), now click start in odin.
That fixed my problem. After that I read and reread everything I could get my hands on, but I think I tried flashing a i1900 kernel.....big duh to me, but maybe I'm not that dumb after all!! But, soon after I was able to root, and have flashed several custom ROMs since my little bump in the road.
Mrplennium said:
Were you able to exchange your device? And if you did, what did the T-Mobile reps ask you? and what did you tell them? I ran into the very same problem. I tried everything but I'm still stuck on that screen. I don't want T-Mobile to think I purposely did something to make the phone that way.
Click to expand...
Click to collapse
Yeah, I just walked in, brought my receipt and box, and told them I needed a new phone because mine bricked while doing a stock update...they were happy to do it... every one there knew I had previously rooted it as well...
Sent from my SGH-T989 using xda premium
i used this method to root my phone, you need to use odin and flash a new rom
Mrplennium said:
Were you able to exchange your device? And if you did, what did the T-Mobile reps ask you? and what did you tell them? I ran into the very same problem. I tried everything but I'm still stuck on that screen. I don't want T-Mobile to think I purposely did something to make the phone that way.
Click to expand...
Click to collapse
Took mine to a store, they didn't have any white kits in stock so they told me to call and tell them that it doesn't turn on, got a replacement ordered without having to troubleshoot over the phone.
Had that happen the first day I got the device trying to root up. Accdently pulled usb while updating. All i did was Hold VOL UP + DOWN And Plug usb in and download mode came right back up and started the process all over again.
It was a success as.
M&S
Worked!
Thank you!
Overseas and very stressed!!
i had a problem updating -- same error message "firmware upgrade encountered an issue" -- kies can NOT connect to my device. ODIN will not install ICS.. ODIN will not install GINGERBREAD either...
i have the SGH-T989 (t-mobile GS2)
nothing will update. i can't back out to revert to the gingerbread OS i was running previously...
can anyone help me out?
email direct or respond here... thanks for anyone's help
have the same problem
tried to downgrade from ics to 2.3.6 and odin gived me a fail message,after that nothing works i i connect it to the charger it says firmware upgrade encountered an issue.please select recovery mode in kies and try again.
but kies doesn`t recognize me and odin neither.
i can go to download mode with my jig but like i said odin does not give me the yellow symbol.....
is it bricked???
atilla88 said:
have the same problem
tried to downgrade from ics to 2.3.6 and odin gived me a fail message,after that nothing works i i connect it to the charger it says firmware upgrade encountered an issue.please select recovery mode in kies and try again.
but kies doesn`t recognize me and odin neither.
i can go to download mode with my jig but like i said odin does not give me the yellow symbol.....
is it bricked???
Click to expand...
Click to collapse
we don't have ICS... so I'm not sure if you're in the correct section. is your phone's variant the t-mobile t989 hercules s2?
don't do anything with kies, go to download/odin mode and flash a fresh download of whatever you messed up on... or I would just flash a complete stock ROM.. the ones ending with ".tar.md5".. that should save your phone.
Teo032 said:
we don't have ICS... so I'm not sure if you're in the correct section. is your phone's variant the t-mobile t989 hercules s2?
don't do anything with kies, go to download/odin mode and flash a fresh download of whatever you messed up on... or I would just flash a complete stock ROM.. the ones ending with ".tar.md5".. that should save your phone.
Click to expand...
Click to collapse
i used a ics rom from xda and my phone is a european s2 without branding,i just saw this thread here and posted my problem.
like i said odin didn`t recognizes me so i can`t flash anything...
My phone is stuck at the samsung logo for about 30 min. I tried flashing another rom but it didnt work. I can access download mode but not recovery mode.
What is my possible solution?
If the 3 button method doesn't work you may be able try ADB to get into recovery.
Sent from my SGH-I747 using xda app-developers app
Thenewguy1 said:
If the 3 button method doesn't work you may be able try ADB to get into recovery.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
The three button method as in "Download Mode"?
ThatGuyIsEpic said:
My phone is stuck at the samsung logo for about 30 min. I tried flashing another rom but it didnt work. I can access download mode but not recovery mode.
What is my possible solution?
Click to expand...
Click to collapse
If you can get into download mode, then ODIN TWRP to your phone. Or ODIN the proper rooted ROM.
Sent from my SGH-I747
aybarrap1 said:
If you can get into download mode, then ODIN TWRP to your phone.
Sent from my SGH-I747
Click to expand...
Click to collapse
Do I flash TWRP in the PDA box on Odin?
Also note that I tried different usb cables and usb ports but nothing is working its still stuck at the boot screen
aybarrap1 said:
If you can get into download mode, then ODIN TWRP to your phone. Or ODIN the proper rooted ROM.
Sent from my SGH-I747
Click to expand...
Click to collapse
I flashed TWRP and tried booting into recovery mode but it doesnt work I get the samsung logo and in the top left hand corner I get recovery boot in blue text then after that it goes black
Is my device useless now?
aybarrap1 said:
If you can get into download mode, then ODIN TWRP to your phone. Or ODIN the proper rooted ROM.
Sent from my SGH-I747
Click to expand...
Click to collapse
All the ROMs I know require you to flash via ClockworkMod is there any ROMs you can flash with Odin?
ThatGuyIsEpic said:
I flashed TWRP and tried booting into recovery mode but it doesnt work I get the samsung logo and in the top left hand corner I get recovery boot in blue text then after that it goes black
Is my device useless now?
Click to expand...
Click to collapse
Vol up + home + power. When your device vibrates and you see the blue text, release just the power button
xbeerdroidx said:
vol up + home + power. When your device vibrates and you see the blue text, release just the power button
Click to expand...
Click to collapse
thank you so much i got it work :d
ThatGuyIsEpic said:
All the ROMs I know require you to flash via ClockworkMod is there any ROMs you can flash with Odin?
Click to expand...
Click to collapse
Uhhg
Just 5 minutes of reading and looking for and answer and you wouldn't have to make this thread -_-
http://www.sammobile.com/firmwares/1/?model=SGH-I747&pcode=ATT#firmware
Any of those firmwares will work on a i747
If you have a i747M or you're not ATT look here and select your correct phone information in the drop down boxes:
http://www.sammobile.com/firmwares/1/
These will restore you to factory, you will still have to root.
I still cant get my phone to work.
I have done this many times and the galaxy s3 logo comes up and then nothing..
I wasnt rooting my phone i was charging it last night.... the phone got hot so i unplugged. I tried to turn it on in the morning and it wouldnt turn on. i know how to put my phone in recovery mode, ive done it before but it wont. it will go into download mode but thats.about. it. I know i dont know much about phones but i know how to put it in recovery mode to clear the cache and that isnt working.... any thoughts?
jessicarabbit85 said:
I still cant get my phone to work.
I have done this many times and the galaxy s3 logo comes up and then nothing..
I wasnt rooting my phone i was charging it last night.... the phone got hot so i unplugged. I tried to turn it on in the morning and it wouldnt turn on. i know how to put my phone in recovery mode, ive done it before but it wont. it will go into download mode but thats.about. it. I know i dont know much about phones but i know how to put it in recovery mode to clear the cache and that isnt working.... any thoughts?
Click to expand...
Click to collapse
Does the phone actually connect to your pc? I assume you have the proper drivers installed? Open odin while in download mode and see if it detects the phone. Sounds as if the phone's bootloader is screwed. If its detected you should be able to fix without much trouble. Sometimes you have to flash the original stock rom as the newer ones sometime have trouble for whatever reason. Version 4.0.4 i believe.
scotteb said:
Does the phone actually connect to your pc? I assume you have the proper drivers installed? Open odin while in download mode and see if it detects the phone. Sounds as if the phone's bootloader is screwed. If its detected you should be able to fix without much trouble. Sometimes you have to flash the original stock rom as the newer ones sometime have trouble for whatever reason. Version 4.0.4 i believe.
Click to expand...
Click to collapse
I dont have odin on this computer, when i plug it in it isnt recognized, i assumed that was because it wasnt technically powered on. I guess i'll take it to someone tomorrow to have it looked at.... im so out of my element here... thanks.
jessicarabbit85 said:
I dont have odin on this computer, when i plug it in it isnt recognized, i assumed that was because it wasnt technically powered on. I guess i'll take it to someone tomorrow to have it looked at.... im so out of my element here... thanks.
Click to expand...
Click to collapse
If you can get the phone into download mode , it should auto install your drivers and make it recognizable by Odin.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Hello everyone,
This is gonna be quick cuz this is the 3rd time im writing this on this site.
AT&T galaxy S3
phone was running Stock JB 4.1.1
Rooted it with CF-AUTO CASUAL
AT&T had a update last night the phone downloaded it and ask to install it i hit proceed while the phone was rooted with CASUAL.
Things ive tried to do to fix -
Remove Battery
Vol up+power+Home Data/cache wipe factory reset
tried to enter download mode for a factory flash with odin3 1.85 but odin doesnt recognize the phone plugged into usb port but the laptop does.
Sorry if this is so short. I've tried to write this message 3 times already and it keeps freeezing on me and not posting it.
Anyone that could help, i would greatly appreciate it.
Thank you again.
Use Odin v3.07, run it as administrator. Flash a stock package. Might have to do a factory reset from recovery after the Odin flash
How do i run it as administrator - odin that is???
Also to note :
Niether odin 3.07 or 1.85 is recogzizing the phone.
The ID:COM is always blank - but my laptop makes a noise once the phone is plugged into the usb port tho....
On win 7, right click on the Odin.exe, select run as administrator. As for the other part, uninstall/reinstall your drivers. Put phone in dl mode(power+ home+ volume down), first time you connect it will say it's installing drivers
mrhaley30705 said:
On win 7, right click on the Odin.exe, select run as administrator. As for the other part, uninstall/reinstall your drivers. Put phone in dl mode(power+ home+ volume down), first time you connect it will say it's installing drivers
Click to expand...
Click to collapse
Odin doesnt recognize the phone when its in dl mode, but does recognize it when its stuck in the samsung logo screen.
Any Ideas????
Namikaze Minato said:
Also to note :
Niether odin 3.07 or 1.85 is recogzizing the phone.
The ID:COM is always blank - but my laptop makes a noise once the phone is plugged into the usb port tho....
Click to expand...
Click to collapse
Try using odin 3.04 thats the only one I can get to work for me
Sent from my SAMSUNG-SGH-I747 using xda premium
Hey all...and to answer the number one question, yes I did do A TON of searches already to find a solution...PLEASE HELP if you have the knowledge
Phone Model: Galaxy S III (SPH-L710) Sprint 16gb
Firmware/ROM: All stock and never tried ANY customization
Problem: I think the problem happened when the phone auto updated to 4.3. Now when the phone tries to boot it just boots to the second Samsung "Samsung Galaxy S III" screen, reboots and then will get to the same screen and just sits there. One time I even let it sit there for 30 minutes just to see if it needed the ridiculous amount of time. When I try to get the phone into recovery mode (Volume UP/Home key/then the Power key) it will boot and on the first Samsung "Samsung" screen, in the top left corner in small print, it shows "booting recovery...". Then it will just go strait to the second Samsung screen then keeps rebooting twice before it will just stop on the second Samsung screen again. When I try to get the phone into ODIN mode (Volume DOWN/Home key/then the Power key) it will boot asking me if I'm sure and to press Volume UP to continue. Once I press Volume UP, to continue, I get to ODIN mode. In the top left corner it shows...
ODIN MODE
Product Name: SPH-710
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Official
(all grayed out) Qualcomm Secureboot: ENABLE
Then in the middle of the screen is the little Android guy. Below that it shows, "Downloading..." "Do not turn off target!!". And it just sits there doing nothing else.
I'm pretty sure I have done everything I could possible do to get it working again. From what I understand there may be other things I can do. Worse case scenario, if I must, I would be willing to loose everything on the phone and start over from scratch, if that's even possible.
There has to be some VERY smart people on here that can help me. This is my wife's phone and we don't have an upgrade until May...PLEASE HELP. Thanks all!!!
Okay 1st go to sammobile.com and download the firmware for d2att also you will need Odin I think it's 3.04. You can search odin on xda there are a few guides to use then put phone in download mode and use odin to flash the firmware, everything u need to follow is posted in sgsIII development forum
Sent from my SGH-I747M using Tapatalk
jimchee said:
Okay 1st go to sammobile.com and download the firmware for d2att also you will need Odin I think it's 3.04. You can search odin on xda there are a few guides to use then put phone in download mode and use odin to flash the firmware, everything u need to follow is posted in sgsIII development forum
Sent from my SGH-I747M using Tapatalk
Click to expand...
Click to collapse
I already downloaded latest versions of both. It states, from phone off and unplugged, start phone using ODIN/download route then immediately plug into PC then open ODIN and click the button....but I cant get that far because ODIN app on PC never recognizes the phone to be able to do so.
I'm now starting to get very discouraged because i'm seeing in some places that the device needs to be put into USB debugging mode. Please tell me this isn't true. Because there has never been any reason to put the phone into USB debug mode.
Can someone please confirm this. I'm really crossing my finger that there is a way to do this without needing to be in USB debug mode...PLS PLS PLS!!!
Thanks for your reply
http://forum.xda-developers.com/galaxy-s3-sprint/help
jimchee said:
Okay 1st go to sammobile.com and download the firmware for d2att also you will need Odin I think it's 3.04. You can search odin on xda there are a few guides to use then put phone in download mode and use odin to flash the firmware, everything u need to follow is posted in sgsIII development forum
Sent from my SGH-I747M using Tapatalk
Click to expand...
Click to collapse
He has the Sprint version, get the one for d2spr, correct?
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
DirtTrash said:
I already downloaded latest versions of both. It states, from phone off and unplugged, start phone using ODIN/download route then immediately plug into PC then open ODIN and click the button....but I cant get that far because ODIN app on PC never recognizes the phone to be able to do so.
I'm now starting to get very discouraged because i'm seeing in some places that the device needs to be put into USB debugging mode. Please tell me this isn't true. Because there has never been any reason to put the phone into USB debug mode.
Can someone please confirm this. I'm really crossing my finger that there is a way to do this without needing to be in USB debug mode...PLS PLS PLS!!!
Thanks for your reply
Click to expand...
Click to collapse
You have to plug the device in from download mode AFTER Odin is running. So, phone in download mode, start Odin, then plug in. Before you go that far are you letting go of the buttons when trying to get to recovery as soon as you seen 'recovery starting' in the top left corner or are you still holding them? If you do not let go the device will continue to attempt a normal boot. If you can get into recovery and do a factory restore it very well may solve your boot issue.