Related
OK I was trying to flash an unlocked kernal via ODIN last night, something went wrong and now phone is stuck on the phone--!--computer screen. I cannot get past this screen. vol+home+power doesn't do anything but loop to the same screen.
It shows ODIN MODE in red at the top of the screen, but ODIn won't recognize the phone, nor will Kies (not running at the same time). Computer makes USB connected/disconnected sound when I plug and unplug the phone.
I have tried One-Click Unbrick, did not recognize that phone was connected.
Help!!
which model of Galaxy S2 do you have?
T-Mobile SGH-T989
hose902 said:
T-Mobile SGH-T989
Click to expand...
Click to collapse
there''s currently nothing to flash this phone
it came out only 2 days ago
DEV are still working on finding root
so, the best suggestion is to take it back to the store and get it exchanged
or wait a few more days/weeks until a flashable release becomes available to fix the mistake
I know, I was hasty and now this. Even when there something available to flash, the device isn't being recognized by ODIN. Any troubleshooting help for this?
When I managed to get my Vibrant into that mode I could pull the battery, hold volume up, put the battery in, press and release power (still holding volume up) and it'd kick back into download mode everytime. Once in download mode I could plug the USB in and a running ODIN would see it pop up. If ODIN wasn't running and USB was already plugged in things wouldn't work right.
I haven't tried ODIN on the GS2 yet (I'll wait for a root ). I did find the vibrant nearly impossible to brick though... trust me I unexpectedly tried quite hard.
You might need the newest ODIN for GS2 support, and possibly newer drivers.
Hey, Hey, Hey...
My Story...
1. I got a TMO Samsung Galaxy S2
2. Tried to root
3. Used Odin to root and install ROM and referenced the following thread: http://forum.xda-developers.com/showthread.php?t=1095274
4. Realized phone models are not the same
5. Phone does not boot and nothing comes up on the screen
6. No lights or LED indicators (i.e. charging) HOWEVER....
7. ODIN recognizes the phone when I plug in the phone via USB
8. Tried to load stock rom:http://forum.xda-developers.com/showthread.php?t=1321811
9. ODIN gets stuck on <ID:0/005> SetupConnection...
10. I am unable to access SD Card for CWR
11. Next step? Return or exchanges are currently not an option.
Thanks in advance for the assistance!
fix4tv said:
Hey, Hey, Hey...
My Story...
1. I got a TMO Samsung Galaxy S2
2. Tried to root
3. Used Odin to root and install ROM and referenced the following thread: http://forum.xda-developers.com/showthread.php?t=1095274
4. Realized phone models are not the same
5. Phone does not boot and nothing comes up on the screen
6. No lights or LED indicators (i.e. charging) HOWEVER....
7. ODIN recognizes the phone when I plug in the phone via USB
8. Tried to load stock rom:http://forum.xda-developers.com/showthread.php?t=1321811
9. ODIN gets stuck on <ID:0/005> SetupConnection...
10. I am unable to access SD Card for CWR
11. Next step? Return or exchanges are currently not an option.
Thanks in advance for the assistance!
Click to expand...
Click to collapse
I'm a bit new to this, but a custom ROM shouldn't affect your recovery mode. Are you sure you are using the correct buttons and methods to boot recovery?
Might want to make a new thread instead of necroing something from when the phone was 2 days old.
I have GT I9100 and done the same thing and got the same result . stuck at setup connection with odin
Please Help
Go into device manager when is plugged in and if it says qhd-usb or something like that its a hard brick. What tipped me off was you said it makes two noises when you plug in. that's a tell tell sign your hard bricked
Sent from my SGH-T989 using xda premium
soft bricked my phone (i hope)
i have sgh-t989 (t-mobile) i am running a miui rom. it wont boot it just goes to miui boot up screen. i can go to the download mode but not recovery (how do u do that) but when im in downoad mode Odin dosnt recognize my phone. and my computer says it is an unknown device.
tried new wire, uninstalling re-installing kies, stopped all processes, diff computer tried to boot for a day, let battery out for a day, and a few other things.
please help and thank you.
iamnoone626 said:
i have sgh-t989 (t-mobile) i am running a miui rom. it wont boot it just goes to miui boot up screen. i can go to the download mode but not recovery (how do u do that) but when im in downoad mode Odin dosnt recognize my phone. and my computer says it is an unknown device.
tried new wire, uninstalling re-installing kies, stopped all processes, diff computer tried to boot for a day, let battery out for a day, and a few other things.
please help and thank you.
Click to expand...
Click to collapse
You should try to uninstall then reinstall driver, and try another usb port. In my experience, Odin seems to be picky, it only recognizes your phone if you plug it in the usb port that you used in the first time.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Recovery is accessed by holding both vol + and - while starting the phone. Hold them both while pressing the power button, then release the power button when it vibrates, keep holding the vol buttons till you see the recovery screen.
Alarmmy said:
You should try to uninstall then reinstall driver, and try another usb port. In my experience, Odin seems to be picky, it only recognizes your phone if you plug it in the usb port that you used in the first time.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
ok i have done this through kies is there another way that you can do this?
---------- Post added at 09:34 AM ---------- Previous post was at 09:26 AM ----------
nagoshi said:
Recovery is accessed by holding both vol + and - while starting the phone. Hold them both while pressing the power button, then release the power button when it vibrates, keep holding the vol buttons till you see the recovery screen.
Click to expand...
Click to collapse
when i do this it only takes me to download mode.
Have a look at http://forum.xda-developers.com/showthread.php?t=1513359
for a DL link for the USB Drivers
Cheers,
Chris
Sk3tchy said:
Have a look at http://forum.xda-developers.com/showthread.php?t=1513359
for a DL link for the USB Drivers
Cheers,
Chris
Click to expand...
Click to collapse
i tryed this but still odin does not recognize my phone. (no yellow box shows up)
the phone does not boot up . when i power on, a screen saying :
odin mode
product name: t989
custom binary download: no
current binary: samsung official
(mobile)--!--(PC)
"Firmware upgrade ecountered an issue. please select recovery mode in Kies & try again.".
I have tried to connecting it to kies but its not recognzied. any suggestions?
Odin stock
jangst123 said:
Odin the ROM below.
If you still can not get it to boot, Odin the Kernel
[STOCK] T-Mobile Samsung Galaxy S II Stock Kernel // UVKID
Originally Posted By: bubby323
and
[ROM] SGH-T989 // UVKID // Stock // Deodexed // Rooted //Busybox
Click to expand...
Click to collapse
Sent from my SGH-T989 using xda premium
mickeycobra04 said:
the phone does not boot up . when i power on, a screen saying :
odin mode
product name: t989
custom binary download: no
current binary: samsung official
(mobile)--!--(PC)
"Firmware upgrade ecountered an issue. please select recovery mode in Kies & try again.".
I have tried to connecting it to kies but its not recognzied. any suggestions?
Click to expand...
Click to collapse
Sent from my SGH-T989 using xda premium
how can i get odin to read my device if my device is stuck in the screen mentioned and when i enter download mode through usb connecting, takes me to the warning screen!! but when i press volume up it doesnt go into the next step, it goes straight to the same screen that i mentioned. thanks for replying btw, your the only person thats helped me out since i started searching for help.
Did you try the button combo to get into download/odin mode? If so you need to get a usb jig to force it into download mode so you can flash back to stock via odin
Sent from my SGH-T989 using xda premium
Same thing happened to me. Just have Odin open and ready to go, plug phone into DL mode just like normal, when the screen pops up give Odin a second or two and then you should see the com light up yellow as Odin recognise your device. Start the flash and let Odin do it's thing and it will reboot and all will be fine.
quest4fire said:
Did you try the button combo to get into download/odin mode? If so you need to get a usb jig to force it into download mode so you can flash back to stock via odin
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
i can get into download mode by plugging usb while holding the vol up/vol down. but when it asks me to press vol up, it takes me to the same screen with "phone-!-PC".
wannagofast said:
Same thing happened to me. Just have Odin open and ready to go, plug phone into DL mode just like normal, when the screen pops up give Odin a second or two and then you should see the com light up yellow as Odin recognise your device. Start the flash and let Odin do it's thing and it will reboot and all will be fine.
Click to expand...
Click to collapse
Ok, just tried this method, when i get into download mode i click vol up and continues to the screen im stuck on. odin still didnt recognize my phone
me 2
im having the same issue with my phone. i googled around it saw ppl with the same issue, but when ppl fix their problem they didnt say how. i left a post on 3 of the threads (including 1 not on xda) but i havent received a response. i tried the hold the buttons method, the delete kies method, the just let odin flash a rom over but when odin gets to "cashe" it fails everytime. i hope i can find a fix, cuz ppl are having this problem and fixing there phone pretty quickly.
did u reinstall the drivers just asking
kdog808 said:
did u reinstall the drivers just asking
Click to expand...
Click to collapse
yeah, i re-installed the samsung kies drivers and deleted running apps in task manager. i also re-installed phone drivers to my cpu. and i re-installed odin to the cpu and restarted the cpu after each method. nothing worked!!! i also tried holding the vol+home+power button, but the error message just pops up.
Yeah my phone is soft bricked I really need to get into download mode without this annoying message
Trevnerdio said:
Yeah my phone is soft bricked I really need to get into download mode without this annoying message
Click to expand...
Click to collapse
Try the second link in the second post. It worked for me. The post with the headline Odin Mode
if your screen has a pc and a warning symbol you still can odin,
open oding and conect your phone to pc while that screen you are saying pops up then see if odin recognizes..
darocsfinest1 said:
Try the second link in the second post. It worked for me. The post with the headline Odin Mode
Click to expand...
Click to collapse
I already did that plus everything else possible :\
Trevnerdio said:
I already did that plus everything else possible :\
Click to expand...
Click to collapse
have you tried reinstalling kies, try it thats what i did. i was in the same screen, it was never read by odin until i did exactly that.
mickeycobra04 said:
have you tried reinstalling kies, try it thats what i did. i was in the same screen, it was never read by odin until i did exactly that.
Click to expand...
Click to collapse
My device is read by Odin and it flashes things. Once I flash a working rom though, it bootloops and I have no recovery to wipe data. I've never been able to get the repartition function to work
And the error I keep receiving every time almost is an error about line 1876. I have no idea what this is. I Googled it and I can't find it.
FWIW My phone would not go into download mode to save my life. I then decided to try the OE Samsung cable instead of the motorola cable I had been using and it worked right away.
Troubleshooting 101, start with the basics.
So I have the same problem as the OP. The only screen I boot to is mobile ! PC in Odin mode. This happened after I was rooted with my stock rom and CWM, but tried to do the OTA update from Kies.
My device is recognized by Odin utility, so I tried what the 2nd poster put and used Odin to flash the stock kernel (UVKID tar) from the PDA button and it failed. I used the default settings in Odin, but maybe I didn't set one right? I have attached a screen shot.
So now do I use Odin to flash the stock recovery? I'm working on making a USB jig in case that will help.
UPDATE: I was able to use Odin to flash the Stock Recovery. Now it boots up like normal. I would like to try the OTA update through Kies again, but I'm worried. Any suggestions?
Kies Firmware Emergency Recovery
mickeycobra04 said:
the phone does not boot up . when i power on, a screen saying :
odin mode
product name: t989
custom binary download: no
current binary: samsung official
(mobile)--!--(PC)
"Firmware upgrade ecountered an issue. please select recovery mode in Kies & try again.".
I have tried to connecting it to kies but its not recognzied. any suggestions?
Click to expand...
Click to collapse
OK the somewhat hidden Firmware Recovery built into Kies is not to hard to find,
First you will need to write on a piece of paper your S/N and your Model #, the same way it is written under the battery on the sticker.
Second boot your phone into download mode and connect it to the computer.
Third open Kies, select the tools drop down menu.
Now you have a choice. Select Firmware Emergency Recovery to recover your current firmware version... or select Firmware Upgrade and Initialization to install the latest OTA, either way just fallow the steps on screen and when done your will have a working phone.
hit the thanks button if this helped
Bro you should check the dates out xD thx anyway though
Sent from my SGH-T989 using xda premium
I was running CM10 but I got a message whenever I got into the Camera App that said "Unfortunately, Gallery has stopped working", after a research in here I found that I wouldn't get that msg again if I installed this "gapps-jb-picasa-20121011-signed" thing.
I did, but when I got into my Camera App, I didn't have the other options like "Image Effects" and all that stuff.
So, what I did was to Restore my phone from my BackUp folder that I've created before installing CM10, but for my surprise I got a msg saying "VolumeError" or something like that and other things that I can't really remember... and as a good Mexican that I am, I ignored it and hit the Reboot System Now..
What happened next almost made me cry...
I was expecting to get in my stock rom without any problems and yadda yadda but... OH SURPRISE!
I got stuck on the boot screen, where it says "Samsung" and the website of it and I didn't freak out... I waited like 5-6 mins and took the battery out. When I turned again, I tried to get in Recovery Mode but the screen just kept turning off and on and saying the exact same thing, the "Samsung" logo and it's website.
I hope you can help me and please answer me. I don't know if I'm 1000000% screwed but I will only wait for the worst. Sorry for my bad english and don't hate me for being mexican
I don't know if I can get into my phone from my PC but whenever I plug my phone in, it just loads it as if it was in Charging Mode
PLEASE HELP ME!
I BEG YOU!
Flash again CM10 with wipe data, cache, dalvik
If still stuck
Odin to stock ROM, you can search on google to odin the epic
Sent from my JellyBeer v.4.14 epicmtd (b3)
Questions go in Q&A
Thread moved
Friendly Neighborhood Moderator
Like @dropple said, it seems you stuck "SAMSUNG" and in this case you can't get into recovery so you can't flash CM10 as of now. Go find some tutorials and Odin back to stock via download mode. Then install CWM recovery if you want and do whatever you like. Should get you outta trouble.
Sent from HTC Incredible S @ PACman v21
AndyYan said:
Like @dropple said, it seems you stuck "SAMSUNG" and in this case you can't get into recovery so you can't flash CM10 as of now. Go find some tutorials and Odin back to stock via download mode. Then install CWM recovery if you want and do whatever you like. Should get you outta trouble.
Sent from HTC Incredible S @ PACman v21
Click to expand...
Click to collapse
Thanks to Everyone!
I solved this like 2 hrs after all this happened.
I got it by Odin. I couldn't go into Recovery Mode, but I got in Download Mode and do it by Odin.
Sorry, I'm a n00b to all this.
Greetings from México and thanks for all your support.
Here's a weird one for you,
Same thing as OP stated. Device is stuck on logo. Can't get into CWM. Was on People's Rom. Device was lagging really bad. Then the system requested superuser permissions. Yes the system requested. Being as I did not request it, I declined. Shut the device down to see if that would help with the extremely bad lag (i mean BAD lag. Like..........................ok it does something then.......................................................................ok it does something else. 10-20 seconds lag)
Connect device to computer to Odin back to Stock or whatever ROM would have worked, computer recognizes device..... wait for it.......
But in download mode Odin does not see it. Com Port will not illuminate. Tried 3 different cables. Tried 6 different USB ports on computer. Still nothing.
Any ideas, because I'm all out?!?
To the OP:
I would follow the instructions in this video from the part where qbking77 talks about putting the phone in download mode, as you presumably did when you first rooted your phone. Download all the files linked/referenced on the site, especially the Samsung mobile drivers, Odinv3 1.87, CWMRecovery, and the deOxed versions of the stock ROM. In sum:
1) get into recovery mode by holding onto the volume down, camera buttons, and then without letting either of those go, press and hold the power button.
if you get into recovery mode, skip to step 4
2) while your phone is completely off, hold onto the "1" button on the slide out keyboard first, then without letting the 1 button go, press and hold the power button until you're in download mode.
3) flash the version of Clockworkmod
4) once in recovery mode, wipe your phone, clear the cache, and dalvik cache, and then flash the deOxed version of the stock ROM
niteNarmor said:
Here's a weird one for you,
Same thing as OP stated. Device is stuck on logo. Can't get into CWM. Was on People's Rom. Device was lagging really bad. Then the system requested superuser permissions. Yes the system requested. Being as I did not request it, I declined. Shut the device down to see if that would help with the extremely bad lag (i mean BAD lag. Like..........................ok it does something then.......................................................................ok it does something else. 10-20 seconds lag)
Connect device to computer to Odin back to Stock or whatever ROM would have worked, computer recognizes device..... wait for it.......
But in download mode Odin does not see it. Com Port will not illuminate. Tried 3 different cables. Tried 6 different USB ports on computer. Still nothing.
Any ideas, because I'm all out?!?
Click to expand...
Click to collapse
Do you have the mobile drivers installed on the computer you're trying to connect your phone to?
Yes. The drivers have been installed previously. The computer will see the device as "Samsung SPH-D700 Card USB Device". But Odin3 1.85 will not see it.
EDIT: When I put device into download mode and connect to computer, the computer only sees it as "Gadget Serial".
niteNarmor said:
Yes. The drivers have been installed previously. The computer will see the device as "Samsung SPH-D700 Card USB Device". But Odin3 1.85 will not see it.
EDIT: When I put device into download mode and connect to computer, the computer only sees it as "Gadget Serial".
Click to expand...
Click to collapse
Uninstall and reinstall drivers.
Sent from my SPH-D700 using Tapatalk 2
Have already done that. But just for laughs, I did do it again with no change.
can you get your D700 into download mode as described above?
Yes I can get into download mode but without Odin recognizing the device (not computer. The computer recognizes the device) there is not much I can do.
niteNarmor said:
Yes I can get into download mode but without Odin recognizing the device (not computer. The computer recognizes the device) there is not much I can do.
Click to expand...
Click to collapse
Try to install another version of Odin or getting Odin from a different server.
My phone is fully recovered and now I'm only SuperUser 'cause I don't want any CM by now.
Greetings from Mexico!
I'm using the same version of Odin I used to root the device. Would a different version really help and if so, what version to use?
I actually have a different version of Odin I used for another device and tried that one as well, with no luck.
EDIT: I have now downloaded and tried 4 different Odin programs with no avail. Again, that makes 6 Odin programs, 6 different USB ports, 3 different cables with the same exact results. The computer recognizes device but Odin will not.
niteNarmor said:
I'm using the same version of Odin I used to root the device. Would a different version really help and if so, what version to use?
I actually have a different version of Odin I used for another device and tried that one as well, with no luck.
Click to expand...
Click to collapse
Had a simular issue when I had two odins on the same computer, for a lark and as I had nothing better to do, tried installing drivers and one version of odin to a vertual machine running vista and checked to see if my computer's vertual machine would reconize and it did, I took it as a sine that at one point I had done something to my computer's main os sometime between rooting my epic 4g and frying it (recovering from a backup from a different parition layout I think, bad times with bootloops and seeing way to much of the samsung logo.) So as I'm not brave enough to run odin on vm I instead removed all of odin from my main os and all of the samsung drivers, then reinstalled rebooted and repluged my epic in, got reconition and reflashed with plesure.
The other issue might be that your computer is reconizing the device and try/failing/hanging and not allowing odin in. Had an issue when my computer was failing to pop up a 'what do I do with this' window and hanging round in the system. A reboot with the internet unpluged strangely solved that for some reason, might be the reboot might be the combo, but I find better connection reconition with my computer when I've fewer things connected.
Don't mind the spelling to much I clean up with my other device.
Sent from my T-Mobile myTouch 3G Slide using xda app-developers app
One question I noticed that hasn't been asked is when you plug the phone into the computer while the phone is on, is usb debugging checked? If not, check it, and reinstall drivers again.
Sent from my SPH-D700 using Tapatalk 2
jeffreyjicha said:
One question I noticed that hasn't been asked is when you plug the phone into the computer while the phone is on, is usb debugging checked? If not, check it, and reinstall drivers again.
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
Phone does not boot past the "Samsung - www.samsung.com" logo. Plus, as with all of my devices, USB debugging is always checked.
Thanks for the suggestion though. Always helps to double check things.
I believe I am going to take it to Sprint tomorrow.
If I can't get into it, they should not be able to get into to it either. If they can't get into it, HELLO WARRANTY....
Perhaps before doing the whole getting found out thing with the return center, perhaps they do know what they're doing, try rolling this link past your eyes?
http://forum.xda-developers.com/showthread.php?t=773032
I know I've been in your boot problem situation and recovered, it just took persistence and eyenumbing amounts of reading.
Note On the multiple Odin, USB, and driver installation: if you've access to another computer it could be worth wile to run once though on a previously virgin computer, meaning your phone and computers' USB's have never touched. Just do the installation, rebooting, and plugging in exasperatingly meticulous order.
Sent from either my SPH-D700 or myTouch3Gs using XDA app
"it never hurts to help"
Yep tried the "virgin computer" computer as well. The computer sees the device but Odin does not. Com light will not illuminate.
Sounds grim.
So to rap up all the cables, plugs, computer, and software with odin is out of the debug process.
So I did some digging into the past and if your computer is reconizing and odin is not then ADB (android debug bridge) and the sdk are the other option
http://forums.androidcentral.com/epic-4g-rooting-roms-hacks/33427-how-access-your-adb-shell.html
Ran across this and it might just be what you need. Its not quick but it has worked for me in the past.
The other thing that may work is ejecting the sd card and battery before doing anything. Though its likely something you've already tried.
Sent from either my SPH-D700 or myTouch3Gs using XDA app
"it never hurts to help"
Hello everyone...
I was updating the phone recently, and went to reboot it (cyanogen mod ROM btw) and now I have no idea what it did but it is now stuck on the Samsung logo, and their is no recovery I can use on it. Only DL mode works.
I tried to use Odin to relfash but the problem is on both my Windows 7 and Windows 8 computers, they install the drivers, but they still fail to recognize the phone when I plug it in!
I have tried different USB ports, a full driver uninstall, multiple USB cords and the computer refuses to recognize the phone saying "USB Device not recognized"
Again, the drivers install fine, and I did a reboot after each install and uninstall. No luck.
I didnt even install drivers on my W8 netbook and I was able to flash back TWRP using Odin and Download mode yesterday when my attempt at flashing TWRP 2.6.0.4 originally failed.
Fire up download mode, then open up Odin (you should see a COM port open), load up what you need to install, then flash.
What are you trying to flash using ODIN? A bootloader or a ROM?
"BootLooping GhostBrick"
Holy crap! you too? I'm experiencing the same thing too bro. its my girlfriend's phone tho. she's borrowing my Nexus 4 while I work on fixing her SGS2...I seem to have contracted a serious case of the BootLooping GhostBrick, just like you did, right after updating. I went through the same steps troubleshooting as you did, and ...its a guess, but I'm starting to figure the solution will probably include: 1. using ADB to push sum files to the phone, or otherwise somehow reflashing stock firmware from the PC.
2. Re-Root the dam thing and flash a kernel with a recovery (like CWM or TWRP) using rom manager...and 3. Considering installing a ROM of my choice Like PACMAN, or Cyanogenmod.....hmm...Yum
anyway, the search for the vaccine to this dreadful affliction begins. Please post if you find something, I will too.
---------- Post added at 10:21 AM ---------- Previous post was at 10:13 AM ----------
nagoshi said:
I didnt even install drivers on my W8 netbook and I was able to flash back TWRP using Odin and Download mode yesterday when my attempt at flashing TWRP 2.6.0.4 originally failed.
Fire up download mode, then open up Odin (you should see a COM port open), load up what you need to install, then flash.
What are you trying to flash using ODIN? A bootloader or a ROM?
Click to expand...
Click to collapse
...true, I second that. I'm doing this as we speak.
No Go Mi Amigo... PC still No read
vdorvilus said:
Holy crap! you too? I'm experiencing the same thing too bro. its my girlfriend's phone tho. she's borrowing my Nexus 4 while I work on fixing her SGS2...I seem to have contracted a serious case of the BootLooping GhostBrick, just like you did, right after updating. I went through the same steps troubleshooting as you did, and ...its a guess, but I'm starting to figure the solution will probably include: 1. using ADB to push sum files to the phone, or otherwise somehow reflashing stock firmware from the PC.
2. Re-Root the dam thing and flash a kernel with a recovery (like CWM or TWRP) using rom manager...and 3. Considering installing a ROM of my choice Like PACMAN, or Cyanogenmod.....hmm...Yum
anyway, the search for the vaccine to this dreadful affliction begins. Please post if you find something, I will too.
---------- Post added at 10:21 AM ---------- Previous post was at 10:13 AM ----------
...true, I second that. I'm doing this as we speak.
Click to expand...
Click to collapse
.....well, so much for that attempt.... still cant get either the PC or Odin to Read....I just flashed CWM recovery using ODIN minutes ago with no problems, but now its borked too
vdorvilus said:
.....well, so much for that attempt.... still cant get either the PC or Odin to Read....I just flashed CWM recovery using ODIN minutes ago with no problems, but now its borked too
Click to expand...
Click to collapse
Reinstall Odin and the drivers for t989, then go get twrp 2.6.0.4 from techerrata.com/browse/twrp2/hercules then open Odin and put the phone in DL mode, now when odin connects make sure u open the recovery in PDA format and touch nothing else in Odin, flash twrp and ur good, this version is capable of dealing with 4.3 too with no issues at all
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Same issue
soupysoup said:
Reinstall Odin and the drivers for t989, then go get twrp 2.6.0.4 from then open Odin and put the phone in DL mode, now when odin connects make sure u open the recovery in PDA format and touch nothing else in Odin, flash twrp and ur good, this version is capable of dealing with 4.3 too with no issues at all
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Re-installing Odin and drivers still didn't get Odin to recognize the device in download mode. Windows 7 isn't assigning it any COM port, and nothing can be flashed unless Odin sees the com port the device is on. I used Goo Manager to flash TWRP 2.6.0.3 over my previous 2.6.0.0 version and now I'm stuck on samsung logo, can't reboot to recovery and PC won't recognize device in download mode. Anyone know a solution?
VermontKindBud said:
Re-installing Odin and drivers still didn't get Odin to recognize the device in download mode. Windows 7 isn't assigning it any COM port, and nothing can be flashed unless Odin sees the com port the device is on. I used Goo Manager to flash TWRP 2.6.0.3 over my previous 2.6.0.0 version and now I'm stuck on samsung logo, can't reboot to recovery and PC won't recognize device in download mode. Anyone know a solution?
Click to expand...
Click to collapse
Welcome to ur first soft brick, and as I said in ur other post u need to disable or removes Samsung kies before trying to use Odin as long as any part of kies is running even in background Odin won't see the device, also make sure u use factory/data approved USB wires, also try diff ports, sometimes Odin won't see com3 but will see com5, be patient and follow this and ull be fine, also twrp2.6.0.3 has been known to cause sftbricks, DL 2.6.0.4 from techerrata.com/browse/twrp2/hercules its the newest and 4.3 compatible
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Yup
soupysoup said:
Welcome to ur first soft brick, and as I said in ur other post u need to disable or removes Samsung kies before trying to use Odin as long as any part of kies is running even in background Odin won't see the device, also make sure u use factory/data approved USB wires, also try diff ports, sometimes Odin won't see com3 but will see com5, be patient and follow this and ull be fine, also twrp2.6.0.3 has been known to cause sftbricks, DL 2.6.0.4 from its the newest and 4.3 compatible
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah, I wish I'd known that. Goo Manager automatically selected it as the latest recovery. I just can't get past the device not showing up as a com port issue at all. Is there any known way to make windows recognize it?
VermontKindBud said:
Yeah, I wish I'd known that. Goo Manager automatically selected it as the latest recovery. I just can't get past the device not showing up as a com port issue at all. Is there any known way to make windows recognize it?
Click to expand...
Click to collapse
Yes u need to make sure kies isn't running or installed on ur PC, if it is Odin won't see it
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Unrecognized by PC
VermontKindBud said:
Yeah, I wish I'd known that. Goo Manager automatically selected it as the latest recovery. I just can't get past the device not showing up as a com port issue at all. Is there any known way to make windows recognize it?
Click to expand...
Click to collapse
It's not a matter of trying different com ports, I can't get the PC or Odin to recognize the phone in download mode despite uninstalling kies, installing the latest drivers twice, 3 different OEM cables, multiple usb ports, nothing. when I plug it in, Windows doesn't make any sound like with other usb devices, nor does it try and search for drivers. Are there any other options short of JTAG repair?
VermontKindBud said:
It's not a matter of trying different com ports, I can't get the PC or Odin to recognize the phone in download mode despite uninstalling kies, installing the latest drivers twice, 3 different OEM cables, multiple usb ports, nothing. when I plug it in, Windows doesn't make any sound like with other usb devices, nor does it try and search for drivers. Are there any other options short of JTAG repair?
Click to expand...
Click to collapse
I was going to reply earlier, but I got side tracked and this guy is literally having the exact same problem as me. I tried multiple OEM cables, and ports and Windows recognized it but it still won't let me USE it. Odin (after re-install) still shows no connections or ports.
Also, yeah this phone isn't mine either, my Dads. He is using my old S3 for now and is quite mad with me hahaha.
So yeah, I have to re-cap...
-Updated through Goomanager.... (the culprit I am guessing)
-Rebooted
-Got stuck on the Galaxy S 2 screen
-Plugged in with 4 USB cables to three different USB ports
-Uninstalled and reinstalled Odin numerous times, each with a reboot between.
-Odin fails to recognize it
-Windows KNOWS IT IS THERE, and makes a sound when plugged in, however it says "USB Device not recognized"
Any more ideas?
Thanks for the help to guys it is very much appreciated. I will donate to the person that can help me out of this
Here is a screen shot of Windows with the phone in DL mode
LGIQEXPO said:
Here is a screen shot of Windows with the phone in DL mode
Click to expand...
Click to collapse
Do u have Samsung kies installed on the PC? If u do your going to need to remove all traces of it in order for Odin to see the phone, also search Samsung t989 USB drivers and install the specific driver for Hercules, if u can get the phone into DL mode its fixavke so don't stress to much, I use Odin v1.85, download twrp2.6.0.4 from this site techerrata.com/browse/twrp2/herculesif Odin still fails to recognize the device try diff PC, factory/data approved USB wire, an make sure kies is nowhere and it should work, pm me if u need more help I'll do what I can, but like I said as long as DL mode is accessible its only a soft brick...
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
soupysoup said:
Do u have Samsung kies installed on the PC? If u do your going to need to remove all traces of it in order for Odin to see the phone, also search Samsung t989 USB drivers and install the specific driver for Hercules, if u can get the phone into DL mode its fixavke so don't stress to much, I use Odin v1.85, download twrp2.6.0.4 from this site techerrata.com/browse/twrp2/herculesif Odin still fails to recognize the device try diff PC, factory/data approved USB wire, an make sure kies is nowhere and it should work, pm me if u need more help I'll do what I can, but like I said as long as DL mode is accessible its only a soft brick...
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Kies is no where in sight. I will try yet another PC as well as searching for Hercules specific drivers (any link?) When I get home. Thank you in the mean time
LGIQEXPO said:
Kies is no where in sight. I will try yet another PC as well as searching for Hercules specific drivers (any link?) When I get home. Thank you in the mean time
Click to expand...
Click to collapse
Just Google Samsung t989 Hercules USB drivers, download and install, it should work, like I said as long as DL mode is accessible it should be an easy fix...
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Omg....
I am experiencing the same problem. Did anyone find the solution?
Probably a faulty USB port. My computer shows that message all the time, only one of them works correctly. If not, you just need to install the correct USB Drivers, because even if you don't have them it should recognize your phone as a Samsung phone but will say that the drivers did not install correctly.
Hi,
I have been a regular visitor of this website and have gained quite a good amount of knowledge through this forum.
I have been with android for the past 2 years and I have loved the android experience.
2 days ago, I read that there was a feature in android whereas the free apps access the internet frequently and use up precious battery power also the paid apps access the google play store in order to verify licenses. Both these kind of apps wakes up itself regularly and this eats up huge amount of battery.
To counter this I was searching for solutions through this website and found that there was an app which could be downloaded and which can handle such kind of scenario. Lucky Patcher. I didn't read the whole thread but I just went ahead and downloaded that app and my phone stopped working minutes after its installation. Upon reading the whole thread I found out that the android phone needs to be rooted in order for that app to work. BIG MISTAKE!
Now my phone is dead. I can start it but it gets stuck on the Samsung Galaxy S3 logo and never goes ahead.
I took the help of this forum to flash a stock ROM of S3 onto my fone using Odin 3.07 and a stock rom downloaded from samsung dash updates dot com.
This is the name of the folder that was downloaded from the website
"Samsung-Updates.com-SGH-T999V_GLW_1_20120818102113_dgbyab64vd"
I tried flashing it using Odin following the procedure but there was nothing happening on the software or on the phone. I kept the phone attached while Odin was "Initialising" for around 4-5 hours. I slept along that time, and when I woke up, it was still there. I was supposed to get "PASS!" on Odin but I didn't get that. I downloaded the previous versions of the stock ROM and tried that but all in vain.
Phone model: SGH-T999V (Wind Mobile, Canada)
Now I can't find a solution to this problem and this is my last resort. By the weekend I will go to one of those mobile stores which I haven't seen in ages, but will have to go there as I am unable to revive back my fone. And I utterly miss using it.
If there is anything any of you guys can help me with, I will be more than happy to reply to any further information you need.
Thank you all for reading, and thanks a million for even thinking of helping me.
God Bless you all.
-shanxthechashmish
I can't get in recovery mode (Home+volumeUP+Power). it vibrates once but the screen remains blank.
I can get into downloading mode (Home+volumeDown+Power). which gives me two options, one to continue and the other to cancel.
(May be this helps to determine whether my phone has been bricked or not!)
Using ODIN, the following information is given and is stuck at this only...
"<OSM> KIES_HOME_T999VVLDLL1_T999VYVLDLL1_CL616748_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation.."
Usually, if you're stuck.during boot you just need to factory reset. Are you sure you're trying the right way to boot recovery? Hold volume up, home and power, when it vibrates, release power but continue holding volume up and home. Some blue text should flash at the top of the screen (you can let go of all buttons now) and it should boot recovery.
No idea why Odin isn't working. Do you have kies installed? If so, get rid of it, reboot and try again.
You could try flashing CWM or TWRP (see my Sig). Then boot recovery and factory reset or flash a Rom.
Sent from my SGH-T999L using Tapatalk 4
Sounds like the drivers are missing. Or you need to run ODIN as administrator
I'm with @KAsp3rd, the computer is not seeing the phone, reinstall the USB drivers try again.
Here is a guide I made:
1. Download and install USB Drivers from here: Thanks to @DocHoliday77 for hosting
http://www.androidfilehost.com/?a=show&w=files&flid=1368
2. Download and extract ODIN 3.07 from here: Thanks to @DocHoliday77 for hosting
http://www.androidfilehost.com/?a=show&w=files&flid=1369
3. Download Stock ROM image (.tar file) from here: Thanks to @DocHoliday77 for hosting
http://forum.xda-developers.com/showthread.php?t=1949687
4. Save all open files and reboot computer
5. Boot phone into Download mode (also called ODIN mode) by shutting down the phone and holding Volume Down & Home then pressing Power until it vibrates, still holding Volume Down & Home buttons, until the "Yellow Triangle" screen shows up.
6. Plug phone into computer and open ODIN 3.07 and make sure that only "Auto Reboot" and "F. Reset Time" are checked.
7. Click on the "PDA" button (right side about half-way down), browse for ROM .tar file, click "Open" button.
8. Click "Start" button and watch to "Reset" or "Fail" to show in the 1st square (upper left side),
9. Phone will reboot
10. Leave phone alone for 10mins+ to let all of the first time boot stuff complete.
Good luck with it.
DocHoliday77 said:
Usually, if you're stuck.during boot you just need to factory reset. Are you sure you're trying the right way to boot recovery? Hold volume up, home and power, when it vibrates, release power but continue holding volume up and home. Some blue text should flash at the top of the screen (you can let go of all buttons now) and it should boot recovery.
No idea why Odin isn't working. Do you have kies installed? If so, get rid of it, reboot and try again.
You could try flashing CWM or TWRP (see my Sig). Then boot recovery and factory reset or flash a Rom.
Sent from my SGH-T999L using Tapatalk 4
Click to expand...
Click to collapse
yes, I was doing the right way with the boot recovery. There was a blue text when the SAMSUNG logo flashed, but nothing after that. I let go off the power button while holding the power up and home buttons, but nothing went ahead.
I dont have kies installed. My laptop has a fresh win 7 ultimate installation. I got the usb drivers for samung already installed, it detects the phone everytime on one of the COM ports.
I'll go through the flashing CWM and TWRP. you meant your signature, right?
sorry for being such a newbie..
KAsp3rd said:
Sounds like the drivers are missing. Or you need to run ODIN as administrator
Click to expand...
Click to collapse
TI reinstalled the drivers using the Samsung flashing kit that was available here on xda developers.
I am not sure if ODIN is run as admin. I guess I need to try that one tonight. In class right now, too anxious to study..
wil post up the results as soon as i reach back home..
shanxthechashmich said:
yes, I was doing the right way with the boot recovery. There was a blue text when the SAMSUNG logo flashed, but nothing after that. I let go off the power button while holding the power up and home buttons, but nothing went ahead.
I dont have kies installed. My laptop has a fresh win 7 ultimate installation. I got the usb drivers for samung already installed, it detects the phone everytime on one of the COM ports.
I'll go through the flashing CWM and TWRP. you meant your signature, right?
sorry for being such a newbie..
Click to expand...
Click to collapse
Yes, in my signature. But the others may still be correct. When you connect and open Odin does it show the port number in the top left area? If not then it's probably a driver issue, even if they're installed. Happens a lot believe it or not. Also try other usb ports on the computer.
If you can flash recovery in Odin though, this is all irrelevant of course! Either way let us know what happens.
Sent from my SGH-T999L using Tapatalk 4
DJ_SpaRky said:
I'm with @KAsp3rd, the computer is not seeing the phone, reinstall the USB drivers try again.
Here is a guide I made:
1. Download and install USB Drivers from here: Thanks to @DocHoliday77 for hosting
http://www.androidfilehost.com/?a=show&w=files&flid=1368
2. Download and extract ODIN 3.07 from here: Thanks to @DocHoliday77 for hosting
http://www.androidfilehost.com/?a=show&w=files&flid=1369
3. Download Stock ROM image (.tar file) from here: Thanks to @DocHoliday77 for hosting
http://forum.xda-developers.com/showthread.php?t=1949687
4. Save all open files and reboot computer
5. Boot phone into Download mode (also called ODIN mode) by shutting down the phone and holding Volume Down & Home then pressing Power until it vibrates, still holding Volume Down & Home buttons, until the "Yellow Triangle" screen shows up.
6. Plug phone into computer and open ODIN 3.07 and make sure that only "Auto Reboot" and "F. Reset Time" are checked.
7. Click on the "PDA" button (right side about half-way down), browse for ROM .tar file, click "Open" button.
8. Click "Start" button and watch to "Reset" or "Fail" to show in the 1st square (upper left side),
9. Phone will reboot
10. Leave phone alone for 10mins+ to let all of the first time boot stuff complete.
Good luck with it.
Click to expand...
Click to collapse
Thnaks for this detailed list.
but i know this drill, the only problem being that the phone is not going anywhere after the step where the ODIN has already flashed the file on the phone.
It gets stuck while "Initializing.." I have posted that as an update on my Post.
As KAsp3rd said that I must try running it as an administrator, I might do it tonight and will let you all know what it gave me..
Thanks for all the help..
I think we posted at the same time so did you see my post? Do you remember if Odin had the port number at the top left? In the Odin output it said ID:0, so it may not be seeing the phone.
Sent from my SGH-T999L using Tapatalk 4
@DocHoliday77
Yes, it shows the COM port on the top left corner of the ODIN.
I have also uninstalled and reinstalled the driveres several times, but with no effect.. I am thinking the run as administrator is the one thing I havent thought of or tried or seen anywhere on the forum.
I will post the result of that as well by tonight.
And thanks for hosting so many files online. I downloaded the one that was needed for the Stock Firmware.
Ok, and in case you don't know, uninstalling the driver software isn't enough on its own. Go into device manager, right click and either update drivers, or uninstall, then install the new driver package.
Sent from my SGH-T999L using Tapatalk 4
DocHoliday77 said:
Ok, and in case you don't know, uninstalling the driver software isn't enough on its own. Go into device manager, right click and either update drivers, or uninstall, then reboot computer, then install the new driver package.
Sent from my SGH-T999L using Tapatalk 4
Click to expand...
Click to collapse
Windows, always reboot after uninstalling any drivers.
@DocHoliday77
I tried that thing again. Reinstalled the drivers after uninstalling and rebooting. there is still no response.
I gave it to one of my friends, he tried putting in the recovery file and now the screen says "Installation of the software has been interrupted, please restart to begin"
I'll post the screenshot in the morning now.
Also, @KAsp3rd : I tried running Odin as administrator, but the same thing happened. It used to get stuck at "Initialization"
Any more advices ?
shanxthechashmich said:
@DocHoliday77
I tried that thing again. Reinstalled the drivers after uninstalling and rebooting. there is still no response.
I gave it to one of my friends, he tried putting in the recovery file and now the screen says "Installation of the software has been interrupted, please restart to begin"
I'll post the screenshot in the morning now.
Also, @KAsp3rd : I tried running Odin as administrator, but the same thing happened. It used to get stuck at "Initialization"
Any more advices ?
Click to expand...
Click to collapse
Is it the phone that says installation interrupted? When he tried flashing the recovery did he use odin? Did it seem to flash properly?
Something else I don't thonk hss been mentioned is to try a different usb cable. Preferably one thst came with the phone, or another device. (Some cables sold for recharging are not capable of data transfer on these devices).
Also, try all ports on the computer, and unplug all unnecessary peripherals.
If something happened and you got a bad flash, it could be bricked. Can't remember if you tried KAsp3rd's unbrick method already.
Another thing you can try to get recovery installed is to adb shell into the device and using the dd command, dump recovery to the phone. Youll have to have the android sdk installed to do this though.
Its hard to say what's really needed at this point though. Usually if you can get download mode, you can Odin the stock firmware. Most Odin problems are due to driver and cable issues. (Is Windows fully updated?)
Even though you can get download mode, the debrick method may still help, but I'm just not sure. Maybe I'm missing something.....
Sent from my SGH-T999L using Tapatalk 4
DocHoliday77 said:
Is it the phone that says installation interrupted? When he tried flashing the recovery did he use odin? Did it seem to flash properly?
Something else I don't thonk hss been mentioned is to try a different usb cable. Preferably one thst came with the phone, or another device. (Some cables sold for recharging are not capable of data transfer on these devices).
Also, try all ports on the computer, and unplug all unnecessary peripherals.
If something happened and you got a bad flash, it could be bricked. Can't remember if you tried KAsp3rd's unbrick method already.
Another thing you can try to get recovery installed is to adb shell into the device and using the dd command, dump recovery to the phone. Youll have to have the android sdk installed to do this though.
Its hard to say what's really needed at this point though. Usually if you can get download mode, you can Odin the stock firmware. Most Odin problems are due to driver and cable issues. (Is Windows fully updated?)
Even though you can get download mode, the debrick method may still help, but I'm just not sure. Maybe I'm missing something.....
Sent from my SGH-T999L using Tapatalk 4
Click to expand...
Click to collapse
I have the original cable with me, the one that came with the s3.
he tried using ODIN, but thats as far as I know. He said something about using Kies to flash the rom as well. not sure what.
No, I didn't try KAsp3rd's unbrick method. Could you please guide me where could I find that?
Also, everything you said after this unbrick method simply doesn't make any sense to me. May be some guided instructions would be helpful.
And yes, the windows is fully updated, no issue on that.
Where can I find the unbrick method?
If you want to just search for android sdk. It'll find Google's page for it and instructions. Should also find some good guides on installing and using. All I'd 've doing is searching for then repeating it back to you, so it'll be easier for both of us if you just go to the source. I think it's developer.Google com or something similar.
And she'll basically connects to your phone and allows you to run commands as if you were using the terminal emulator.
The debrick thread is stickies in development.
Sent from my SGH-T999V using Tapatalk 4
what is the official stock firmware can i download directly? and what are name of the firmware and how long the procedure to flash that?
Firmware thread stickies in development section. Link is also in my Sig. Everything you need to know and download to get started is in that thread.
Sent from my SPH-L710 using Tapatalk